PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

branches: 1.55.4;
UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

Remove uscanner(4) driver

This exists for compatibility with a Linux interface which was apparently
deprecated in Linux 2.6. There are various mailing list threads going
back to 2004 where the usefulness of this driver is discussed, but
the conclusion is that scanner software has all moved to using ugen(4)
instead, and enabling this driver will not help you scan things.

branches: 1.53.6;
vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Remove uyap, USB YAP phone firmware loader.

And the associated ezload EZ-USB code, which is only used by uyap.
It could theoretically be used by other drivers, but none of them are
in tree.

I suspect that this device isn't in use, as phone technology has improved
a lot since 2001 when uyap(4) was added to the tree.

Proposed with no objections on netbsd-users on 13 April 2020

remove 'file-system SMBFS' and 'pseudo-device nsmb' from all kernel configs
to prepare for their eventual removal

g/c UGEN_BULK_RA_WB which is not a supported option

remove urio(4), a driver for the Rio500 MP3 player.

At this point it is highly unlikely this 1999 device still has users,
but it still comes up in the context of maxv's USB-fuzzing (and any device
could pretend to be a urio(4)), so it's best to get rid of it.

Renamed all major entries to obsolete, as was done in previous removals.

This still requires an update to sanitizers, but they're located in
"external", perhaps it should be first committed upstream?

Proposed on tech-kern a month ago.

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.46.4;
Use veriexec.config to reduce duplication

Add ure(4) to kernel config files. Also add PHY drivers where necessary.

Remove CONS_OVERRIDE - it's an i386 option

remove the 'wd* at umass?' for the non-standardized and rare (extinct?)
In-System Design ATA protocol over Bulk-Only devices from most kernels,
leave only in i386/amd64 ALL; it's unmaintained and likely currently broken,
lack of test hardware makes it impossible to support

Add (commented out) mue(4) to where appropriate.
Also add MII/PHY drivers for USB NICs if missing.

Retire NDIS. It appears that it has never worked, after 13 years it was
still marked as "experimental", and nowadays it may be one more obstacle
to MPification of the network stack.

Discussed on tech-net@.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

Remove the kernel PMC code. Sent yesterday on tech-kern@.

This change:

* Removes "options PERFCTRS", the associated includes, and the associated
ifdefs. In doing so, it removes several XXXSMPs in the MI code, which is
good.

* Removes the PMC code of ARM XSCALE.

* Removes all the pmc.h files. They were all empty, except for ARM XSCALE.

* Reorders the x86 PMC code not to rely on the legacy pmc.h file. The
definitions are put in sysarch.h.

* Removes the kern/sys_pmc.c file, and along with it, the sys_pmc_control
and sys_pmc_get_info syscalls. They are marked as OBSOL in kern,
netbsd32 and rump.

* Removes the pmc_evid_t and pmc_ctr_t types.

* Removes all the associated man pages. The sets are marked as obsolete.

branches: 1.38.2;
Use the "flags" config directive modifier to specify seeprom size
(a pre-existing capability in seeprom driver) now that "size" is no
longer a valid locator for i2c.

Remove commented out MATH_EMULATE from kernel configs that got it
by copying an older i386 config.

Revert changes that pinned-down i2c parent specs. The i2c subsystem
has been enhanced to make this unnecessary.

Fully specifiy the location of indirectly-configured I2C devices. In
particular, the parent spec must not be wild-carded, as doing so doesn't
work well on systems where more than one I2C bus is present.

branches: 1.34.2;
Alternate buffer queue strategies no longer considered experimental, update
or add new description for files missed out in the previous run.

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Remove references to svr4 and ibcs2, they are not supported here.

Remove references to compat_freebsd when it is not supported.

Remove commented vestiges of bygone compat options.

COMPAT_MACH, COMPAT_DARWIN, EXEC_MACHO, and COMPAT_PECOFF were all
removed ages ago.

Remove TCP_COMPAT_42 from the config files. Pass 3.

branches: 1.27.6;
PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.26.2;
wildcard speaker attachments, now that we can handle many of them.

remove VAUDIOSPEAKER for now, will be done differently.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

mention PAX_SEGVGUARD dependency on FILEASSOC

branches: 1.22.2;
Remove references to SPLASHSCREEN_PROGRESS

To my knowledge this feature is no longer supported at the moment. The
manual page for wsdisplay(4) should probably also be updated to reflect
this situation.

Remove KMEMSTATS. Normally it's ok now.

branches: 1.20.2;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Reorganize symbol table embedding. The existing option SYMTAB_SPACE is
replaced by the make option COPY_SYMTAB set to any value. The copy of
the symbol table is no longer put into a buffer in kern_ksyms.o, but a
small helper object. This object is build first with a dummy size, then
the kernel is linked to compute the real dimension of the symbol table
buffer. After that, the helper object is rebuild and the kernel linked
again.

Add COMPAT_NETBSD32 to more kernels (we have too many)

branches: 1.17.2;
fix manual section numbering of sysctl.
thanks wiz@

G/C PFIL_HOOKS from the kernel configs.

branches: 1.15.2;
remove obsolete networking options

more bogus number removal

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

branches: 1.9.2;
Add PUFFS, putter and fss.

Split DEBUG="-g -Ox" into DEBUG="-g" and COPTS="-Ox".

Rename RT2500USB driver to ural(4) as it was originally in OpenBSD,
as ural(4) and ral(4) do not actually share any code.

Enable ural(4) in hpcarm WZERO3 kernel too, as it will now build.

Fixes PR#43520.

Adjust the WSDISPLAY_COMPAT_USL comment to mention wsconscfg, to at least
give a hint that its not just for third party compat. No functional change.

Remove obsolete SysV semaphores limit options (SEMMNI, SEMMNS, and SEMUME).

P1003_1B_SEMAPHORE is no longer optional.

branches: 1.3.2;
WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.2.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.1.2;
preliminary support for the Propox MMnet1002 board
http://www.propox.com/products/t_232.html