xref: /src/sys/arch/evbarm/conf/TEAMASA_NPWR

#	$NetBSD: TEAMASA_NPWR,v 1.13 2002/04/25 01:50:00 briggs Exp $
#
#	TEAMASA_NPWR -- Team ASA, Inc. Npwr -- XScale/IOP310-based
#	server appliance.
#

include	"arch/evbarm/conf/std.iq80310"
options 	IOP310_TEAMASA_NPWR	# Enable Npwr support

# estimated number of users

maxusers	32

# Standard system options

options 	RTC_OFFSET=0	# hardware clock is this many mins. west of GMT
options 	NTP		# NTP phase/frequency locked loop

# CPU options

# For StrongARM systems
options 	CPU_XSCALE_80200	# Support the XScale core
makeoptions	COPTS="-O2 -march=armv4 -mtune=strongarm"
#makeoptions	COPTS="-O2 -march=armv5 -mtune=xscale"
options 	XSCALE_CCLKCFG=7	# 600MHz

# Architecture options

# File systems

file-system	FFS		# UFS
#file-system	LFS		# log-structured file system
file-system	MFS		# memory file system
file-system	NFS		# Network file system
#file-system 	ADOSFS		# AmigaDOS-compatible file system
file-system 	EXT2FS		# second extended file system (linux)
#file-system	CD9660		# ISO 9660 + Rock Ridge file system
#file-system	MSDOSFS		# MS-DOS file system
file-system	FDESC		# /dev/fd
file-system	KERNFS		# /kern
file-system	NULLFS		# loopback file system
#file-system	PORTAL		# portal filesystem (still experimental)
file-system	PROCFS		# /proc
#file-system	UMAPFS		# NULLFS + uid and gid remapping
#file-system	UNION		# union file system

# File system options
#options 	QUOTA		# UFS quotas
#options 	FFS_EI		# FFS Endian Independant support
options 	NFSSERVER
options 	SOFTDEP

# Networking options

#options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
options 	INET6		# IPV6
#options 	IPSEC		# IP security
#options 	IPSEC_ESP	# IP security (encryption part; define w/ IPSEC)
#options 	IPSEC_DEBUG	# debug for IP security
#options 	MROUTING	# IP multicast routing
#options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
#options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
#options 	CCITT,LLC,HDLC	# X.25
#options 	NETATALK	# AppleTalk networking
#options 	PFIL_HOOKS	# pfil(9) packet filter hooks
#options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
#options 	PPP_DEFLATE	# Deflate compression support for PPP
#options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG

options 	NFS_BOOT_BOOTP
options 	NFS_BOOT_DHCP
#options 	NFS_BOOT_BOOTPARAM

# Compatibility options

#options 	COMPAT_43	# 4.3BSD compatibility.
options 	COMPAT_15	# NetBSD 1.5 compatibility.
options 	COMPAT_14	# NetBSD 1.4 compatibility.
#options 	COMPAT_13	# NetBSD 1.3 compatibility.
#options 	COMPAT_12	# NetBSD 1.2 compatibility.
#options 	COMPAT_11	# NetBSD 1.1 compatibility.
#options 	COMPAT_10	# NetBSD 1.0 compatibility.
#options 	COMPAT_09	# NetBSD 0.9 compatibility.
#options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.

# Shared memory options

options 	SYSVMSG		# System V-like message queues
options 	SYSVSEM		# System V-like semaphores
#options 	SEMMNI=10	# number of semaphore identifiers
#options 	SEMMNS=60	# number of semaphores in system
#options 	SEMUME=10	# max number of undo entries per process
#options 	SEMMNU=30	# number of undo structures in system
options 	SYSVSHM		# System V-like memory sharing
options 	SHMMAXPGS=1024	# 1024 pages is the default

# Device options

#options 	MEMORY_DISK_HOOKS	# boottime setup of ramdisk
#options 	MEMORY_DISK_ROOT_SIZE=3400	# Size in blocks
#options 	MEMORY_DISK_IS_ROOT	# use memory disk as root

# Console options.  The default console is oriented towards the IQ80310
# eval board, on connector J9 ("com0") at # 115200 baud.
#
# The Npwr's RedBoot firmware uses 19200, and there is only one
# serial port.
#options 	CONSPEED=19200		# Console speed
#options 	CONUNIT=1		# Console unit (0=J9, 1=J10)

# Miscellaneous kernel options
options 	KTRACE		# system call tracing, a la ktrace(1)
#options 	LKM		# loadable kernel modules
#options 	KMEMSTATS	# kernel memory statistics
options 	SCSIVERBOSE	# Verbose SCSI errors
options 	PCIVERBOSE	# Verbose PCI descriptions
options 	MIIVERBOSE	# Verbose MII autoconfuration messages
#options 	PCI_CONFIG_DUMP	# verbosely dump PCI config space
#options 	DDB_KEYCODE=0x40
#options 	USERCONF	# userconf(4) support
#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)

# Development and Debugging options

options 	DIAGNOSTIC	# internally consistency checks
#options 	DEBUG
#options 	PMAP_DEBUG	# Enable pmap_debug_level code
#options 	IPKDB		# remote kernel debugging
#options 	VERBOSE_INIT_ARM # verbose bootstraping messages
options 	DDB		# in-kernel debugger
options 	DDB_HISTORY_SIZE=100	# Enable history editing in DDB
makeoptions	DEBUG="-g"	# compile full symbol table
options 	SYMTAB_SPACE=200000

config		netbsd		root on ? type ?
config		netbsd-wm0	root on wm0 type nfs
config		netbsd-sd0	root on sd0 type ?

# The main bus device
mainbus0	at root

# The boot cpu
cpu0		at mainbus?

# On-board device support
obio*		at mainbus?
com*		at obio? addr ?		# on-board XR 16550 UARTs

# i80312 Companion I/O support
iopxs*		at mainbus?
pci*		at iopxs? bus ?

#
# Networking devices
#

# PCI network devices
wm*		at pci? dev ? function ?

# MII/PHY support
makphy*		at mii? phy ?			# Marvell "Alaska" Gig-E PHY
ukphy*		at mii? phy ?			# Generic IEEE 802.3u PHYs

#
# Mass storage devices
#

# PCI SCSI controllers
siop0		at pci? dev ? function ?	# on-board LSI 53c1010
options 	SIOP_SYMLED
scsibus*	at scsi?

# SCSI device support
sd*		at scsibus? target ? lun ?	# SCSI disks
cd*		at scsibus? target ? lun ?	# SCSI CD-ROMs
st*		at scsibus? target ? lun ?	# SCSI tapes
uk*		at scsibus? target ? lun ?	# unknown SCSI devices

# Pseudo-Devices

# disk/mass storage pseudo-devices
#pseudo-device	md		1	# memory disk device (ramdisk)
pseudo-device	vnd		4	# disk-like interface to files
pseudo-device	raid		4	# RAIDframe devices
#pseudo-device	ccd		4	# Concatenated disk devices

# network pseudo-devices
pseudo-device	bpfilter	4	# Berkeley packet filter
pseudo-device	loop			# network loopback

# miscellaneous pseudo-devices
pseudo-device	pty			# pseudo-terminals
pseudo-device	rnd			# /dev/random and in-kernel generator