machdep.c revision 1.12 1 /* $NetBSD: machdep.c,v 1.12 2003/07/14 12:59:36 simonb Exp $ */
2
3 /*
4 * Copyright 2001, 2002 Wasabi Systems, Inc.
5 * All rights reserved.
6 *
7 * Written by Eduardo Horvath and Simon Burge for Wasabi Systems, Inc.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. All advertising materials mentioning features or use of this software
18 * must display the following acknowledgement:
19 * This product includes software developed for the NetBSD Project by
20 * Wasabi Systems, Inc.
21 * 4. The name of Wasabi Systems, Inc. may not be used to endorse
22 * or promote products derived from this software without specific prior
23 * written permission.
24 *
25 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35 * POSSIBILITY OF SUCH DAMAGE.
36 */
37
38 /*
39 * Copyright (C) 1995, 1996 Wolfgang Solfrank.
40 * Copyright (C) 1995, 1996 TooLs GmbH.
41 * All rights reserved.
42 *
43 * Redistribution and use in source and binary forms, with or without
44 * modification, are permitted provided that the following conditions
45 * are met:
46 * 1. Redistributions of source code must retain the above copyright
47 * notice, this list of conditions and the following disclaimer.
48 * 2. Redistributions in binary form must reproduce the above copyright
49 * notice, this list of conditions and the following disclaimer in the
50 * documentation and/or other materials provided with the distribution.
51 * 3. All advertising materials mentioning features or use of this software
52 * must display the following acknowledgement:
53 * This product includes software developed by TooLs GmbH.
54 * 4. The name of TooLs GmbH may not be used to endorse or promote products
55 * derived from this software without specific prior written permission.
56 *
57 * THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR
58 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
59 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
60 * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
61 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
62 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
63 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
64 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
65 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
66 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
67 */
68
69 #include "opt_compat_netbsd.h"
70 #include "opt_ddb.h"
71 #include "opt_ipkdb.h"
72
73 #include <sys/param.h>
74 #include <sys/buf.h>
75 #include <sys/exec.h>
76 #include <sys/malloc.h>
77 #include <sys/mbuf.h>
78 #include <sys/mount.h>
79 #include <sys/msgbuf.h>
80 #include <sys/proc.h>
81 #include <sys/reboot.h>
82 #include <sys/sa.h>
83 #include <sys/syscallargs.h>
84 #include <sys/syslog.h>
85 #include <sys/systm.h>
86 #include <sys/kernel.h>
87 #include <sys/user.h>
88 #include <sys/boot_flag.h>
89 #include <sys/properties.h>
90 #include <sys/ksyms.h>
91
92 #include <uvm/uvm_extern.h>
93
94 #include <net/netisr.h>
95
96 #include <machine/bus.h>
97 #include <machine/powerpc.h>
98 #include <machine/trap.h>
99 #include <machine/walnut.h>
100
101 #include <powerpc/spr.h>
102 #include <powerpc/ibm4xx/dcr405gp.h>
103 #include <machine/bus.h>
104
105 #include <dev/cons.h>
106
107 #include "ksyms.h"
108
109 #if defined(DDB)
110 #include <machine/db_machdep.h>
111 #include <ddb/db_extern.h>
112 #endif
113
114 /*
115 * Global variables used here and there
116 */
117 struct vm_map *exec_map = NULL;
118 struct vm_map *mb_map = NULL;
119 struct vm_map *phys_map = NULL;
120
121 /*
122 * This should probably be in autoconf! XXX
123 */
124 char cpu_model[80];
125 char machine[] = MACHINE; /* from <machine/param.h> */
126 char machine_arch[] = MACHINE_ARCH; /* from <machine/param.h> */
127
128 extern struct user *proc0paddr;
129
130 char bootpath[256];
131 paddr_t msgbuf_paddr;
132 vaddr_t msgbuf_vaddr;
133
134 #if NKSYMS || defined(DDB) || defined(LKM)
135 void *startsym, *endsym;
136 #endif
137
138 int lcsplx(int);
139 void initppc(u_int, u_int, char *, void *);
140
141 static void dumpsys(void);
142 static void install_extint(void (*)(void));
143
144 #define MEMREGIONS 8
145 struct mem_region physmemr[MEMREGIONS]; /* Hard code memory */
146 struct mem_region availmemr[MEMREGIONS]; /* Who's supposed to set these up? */
147
148 struct board_cfg_data board_data;
149 struct propdb *board_info = NULL;
150
151 void
152 initppc(u_int startkernel, u_int endkernel, char *args, void *info_block)
153 {
154 extern int defaulttrap, defaultsize;
155 extern int sctrap, scsize;
156 extern int alitrap, alisize;
157 extern int dsitrap, dsisize;
158 extern int isitrap, isisize;
159 extern int mchktrap, mchksize;
160 extern int tlbimiss4xx, tlbim4size;
161 extern int tlbdmiss4xx, tlbdm4size;
162 extern int pitfitwdog, pitfitwdogsize;
163 extern int debugtrap, debugsize;
164 extern int errata51handler, errata51size;
165 #ifdef DDB
166 extern int ddblow, ddbsize;
167 #endif
168 #ifdef IPKDB
169 extern int ipkdblow, ipkdbsize;
170 #endif
171 int exc;
172 struct cpu_info * const ci = curcpu();
173
174 /* Disable all external interrupts */
175 mtdcr(DCR_UIC0_ER, 0);
176
177 /* Initialize cache info for memcpy, etc. */
178 cpu_probe_cache();
179
180 /* Save info block */
181 if (info_block == NULL)
182 /* XXX why isn't r3 set correctly?!?!? */
183 info_block = (void *)0x8e10;
184 memcpy(&board_data, info_block, sizeof(board_data));
185
186 memset(physmemr, 0, sizeof physmemr);
187 memset(availmemr, 0, sizeof availmemr);
188 physmemr[0].start = 0;
189 physmemr[0].size = board_data.mem_size & ~PGOFSET;
190 /* Lower memory reserved by eval board BIOS */
191 availmemr[0].start = startkernel;
192 availmemr[0].size = board_data.mem_size - availmemr[0].start;
193
194 /*
195 * Initialize lwp0 and current pcb and pmap pointers.
196 */
197 lwp0.l_cpu = ci;
198 lwp0.l_addr = proc0paddr;
199 memset(lwp0.l_addr, 0, sizeof *lwp0.l_addr);
200
201 curpcb = &proc0paddr->u_pcb;
202 curpm = curpcb->pcb_pmreal = curpcb->pcb_pm = pmap_kernel();
203
204 /*
205 * Set up trap vectors
206 */
207 for (exc = EXC_RSVD; exc <= EXC_LAST; exc += 0x100)
208 switch (exc) {
209 default:
210 memcpy((void *)exc, &defaulttrap, (size_t)&defaultsize);
211 break;
212 case EXC_EXI:
213 /*
214 * This one is (potentially) installed during autoconf
215 */
216 break;
217 case EXC_SC:
218 memcpy((void *)EXC_SC, &sctrap, (size_t)&scsize);
219 break;
220 case EXC_ALI:
221 memcpy((void *)EXC_ALI, &alitrap, (size_t)&alisize);
222 break;
223 case EXC_DSI:
224 memcpy((void *)EXC_DSI, &dsitrap, (size_t)&dsisize);
225 break;
226 case EXC_ISI:
227 memcpy((void *)EXC_ISI, &isitrap, (size_t)&isisize);
228 break;
229 case EXC_MCHK:
230 memcpy((void *)EXC_MCHK, &mchktrap, (size_t)&mchksize);
231 break;
232 case EXC_ITMISS:
233 memcpy((void *)EXC_ITMISS, &tlbimiss4xx,
234 (size_t)&tlbim4size);
235 break;
236 case EXC_DTMISS:
237 memcpy((void *)EXC_DTMISS, &tlbdmiss4xx,
238 (size_t)&tlbdm4size);
239 break;
240 /*
241 * EXC_PIT, EXC_FIT, EXC_WDOG handlers
242 * are spaced by 0x10 bytes only..
243 */
244 case EXC_PIT:
245 memcpy((void *)EXC_PIT, &pitfitwdog,
246 (size_t)&pitfitwdogsize);
247 break;
248 case EXC_DEBUG:
249 memcpy((void *)EXC_DEBUG, &debugtrap,
250 (size_t)&debugsize);
251 break;
252 case EXC_DTMISS|EXC_ALI:
253 /* PPC405GP Rev D errata item 51 */
254 memcpy((void *)(EXC_DTMISS|EXC_ALI), &errata51handler,
255 (size_t)&errata51size);
256 break;
257 #if defined(DDB) || defined(IPKDB)
258 case EXC_PGM:
259 #if defined(DDB)
260 memcpy((void *)exc, &ddblow, (size_t)&ddbsize);
261 #elif defined(IPKDB)
262 memcpy((void *)exc, &ipkdblow, (size_t)&ipkdbsize);
263 #endif
264 #endif /* DDB | IPKDB */
265 break;
266 }
267
268 __syncicache((void *)EXC_RST, EXC_LAST - EXC_RST + 0x100);
269 mtspr(SPR_EVPR, 0); /* Set Exception vector base */
270 consinit();
271
272 /* Handle trap instruction as PGM exception */
273 {
274 int dbcr0;
275 asm volatile("mfspr %0,%1":"=r"(dbcr0):"K"(SPR_DBCR0));
276 asm volatile("mtspr %0,%1"::"K"(SPR_DBCR0),"r"(dbcr0 & ~DBCR0_TDE));
277 }
278
279 /*
280 * external interrupt handler install
281 */
282 install_extint(ext_intr);
283
284 /*
285 * Now enable translation (and machine checks/recoverable interrupts).
286 */
287 asm volatile ("mfmsr %0; ori %0,%0,%1; mtmsr %0; isync"
288 : : "r"(0), "K"(PSL_IR|PSL_DR));
289 /* XXXX PSL_ME - With ME set kernel gets stuck... */
290
291 uvm_setpagesize();
292
293 /*
294 * Initialize pmap module.
295 */
296 pmap_bootstrap(startkernel, endkernel);
297
298 consinit();
299
300 #ifdef DEBUG
301 printf("Board config data:\n");
302 printf(" usr_config_ver = %s\n", board_data.usr_config_ver);
303 printf(" rom_sw_ver = %s\n", board_data.rom_sw_ver);
304 printf(" mem_size = %u\n", board_data.mem_size);
305 printf(" mac_address_local = %02x:%02x:%02x:%02x:%02x:%02x\n",
306 board_data.mac_address_local[0], board_data.mac_address_local[1],
307 board_data.mac_address_local[2], board_data.mac_address_local[3],
308 board_data.mac_address_local[4], board_data.mac_address_local[5]);
309 printf(" mac_address_pci = %02x:%02x:%02x:%02x:%02x:%02x\n",
310 board_data.mac_address_pci[0], board_data.mac_address_pci[1],
311 board_data.mac_address_pci[2], board_data.mac_address_pci[3],
312 board_data.mac_address_pci[4], board_data.mac_address_pci[5]);
313 printf(" processor_speed = %u\n", board_data.processor_speed);
314 printf(" plb_speed = %u\n", board_data.plb_speed);
315 printf(" pci_speed = %u\n", board_data.pci_speed);
316 #endif
317
318 #if NKSYMS || defined(DDB) || defined(LKM)
319 ksyms_init((int)((u_int)endsym - (u_int)startsym), startsym, endsym);
320 #endif
321 #ifdef DDB
322 if (boothowto & RB_KDB)
323 Debugger();
324 #endif
325 #ifdef IPKDB
326 /*
327 * Now trap to IPKDB
328 */
329 ipkdb_init();
330 if (boothowto & RB_KDB)
331 ipkdb_connect(0);
332 #endif
333 fake_mapiodev = 0;
334 }
335
336 static void
337 install_extint(void (*handler)(void))
338 {
339 extern int extint, extsize;
340 extern u_long extint_call;
341 u_long offset = (u_long)handler - (u_long)&extint_call;
342 int omsr, msr;
343
344 #ifdef DIAGNOSTIC
345 if (offset > 0x1ffffff)
346 panic("install_extint: too far away");
347 #endif
348 asm volatile ("mfmsr %0; andi. %1,%0,%2; mtmsr %1"
349 : "=r"(omsr), "=r"(msr) : "K"((u_short)~PSL_EE));
350 extint_call = (extint_call & 0xfc000003) | offset;
351 memcpy((void *)EXC_EXI, &extint, (size_t)&extsize);
352 __syncicache((void *)&extint_call, sizeof extint_call);
353 __syncicache((void *)EXC_EXI, (int)&extsize);
354 asm volatile ("mtmsr %0" :: "r"(omsr));
355 }
356
357 /*
358 * Machine dependent startup code.
359 */
360
361 char msgbuf[MSGBUFSIZE];
362
363 void
364 cpu_startup(void)
365 {
366 caddr_t v;
367 vaddr_t minaddr, maxaddr;
368 u_int sz, i, base, residual;
369 char pbuf[9];
370
371 /*
372 * Initialize error message buffer (at end of core).
373 */
374 #if 0 /* For some reason this fails... --Artem
375 * Besides, do we really have to put it at the end of core?
376 * Let's use static buffer for now
377 */
378 if (!(msgbuf_vaddr = uvm_km_alloc(kernel_map, round_page(MSGBUFSIZE))))
379 panic("startup: no room for message buffer");
380 for (i = 0; i < btoc(MSGBUFSIZE); i++)
381 pmap_kenter_pa(msgbuf_vaddr + i * PAGE_SIZE,
382 msgbuf_paddr + i * PAGE_SIZE, VM_PROT_READ|VM_PROT_WRITE);
383 initmsgbuf((caddr_t)msgbuf_vaddr, round_page(MSGBUFSIZE));
384 #else
385 initmsgbuf((caddr_t)msgbuf, round_page(MSGBUFSIZE));
386 #endif
387
388
389 printf("%s", version);
390 printf("Walnut PowerPC 405GP Evaluation Board\n");
391
392 format_bytes(pbuf, sizeof(pbuf), ctob(physmem));
393 printf("total memory = %s\n", pbuf);
394
395 /*
396 * Find out how much space we need, allocate it,
397 * and then give everything true virtual addresses.
398 */
399 sz = (u_int)allocsys(NULL, NULL);
400 if ((v = (caddr_t)uvm_km_zalloc(kernel_map, round_page(sz))) == 0)
401 panic("startup: no room for tables");
402 if (allocsys(v, NULL) - v != sz)
403 panic("startup: table size inconsistency");
404
405 /*
406 * Now allocate buffers proper. They are different than the above
407 * in that they usually occupy more virtual memory than physical.
408 */
409 sz = MAXBSIZE * nbuf;
410 minaddr = 0;
411 if (uvm_map(kernel_map, (vaddr_t *)&minaddr, round_page(sz),
412 NULL, UVM_UNKNOWN_OFFSET, 0,
413 UVM_MAPFLAG(UVM_PROT_NONE, UVM_PROT_NONE, UVM_INH_NONE,
414 UVM_ADV_NORMAL, 0)) != 0)
415 panic("startup: cannot allocate VM for buffers");
416 buffers = (char *)minaddr;
417 base = bufpages / nbuf;
418 residual = bufpages % nbuf;
419 if (base >= MAXBSIZE) {
420 /* Don't want to alloc more physical mem than ever needed */
421 base = MAXBSIZE;
422 residual = 0;
423 }
424 for (i = 0; i < nbuf; i++) {
425 vsize_t curbufsize;
426 vaddr_t curbuf;
427 struct vm_page *pg;
428
429 curbuf = (vaddr_t)buffers + i * MAXBSIZE;
430 curbufsize = PAGE_SIZE * (i < residual ? base + 1 : base);
431
432 while (curbufsize) {
433 pg = uvm_pagealloc(NULL, 0, NULL, 0);
434 if (pg == NULL)
435 panic("cpu_startup: not enough memory for "
436 "buffer cache");
437 pmap_kenter_pa(curbuf, VM_PAGE_TO_PHYS(pg),
438 VM_PROT_READ | VM_PROT_WRITE);
439 curbuf += PAGE_SIZE;
440 curbufsize -= PAGE_SIZE;
441 }
442 }
443
444 /*
445 * Allocate a submap for exec arguments. This map effectively
446 * limits the number of processes exec'ing at any time.
447 */
448 exec_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
449 16*NCARGS, VM_MAP_PAGEABLE, FALSE, NULL);
450
451 /*
452 * Allocate a submap for physio
453 */
454 phys_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
455 VM_PHYS_SIZE, 0, FALSE, NULL);
456
457 /*
458 * No need to allocate an mbuf cluster submap. Mbuf clusters
459 * are allocated via the pool allocator, and we use direct-mapped
460 * pool pages.
461 */
462
463 format_bytes(pbuf, sizeof(pbuf), ptoa(uvmexp.free));
464 printf("avail memory = %s\n", pbuf);
465 format_bytes(pbuf, sizeof(pbuf), bufpages * PAGE_SIZE);
466 printf("using %u buffers containing %s of memory\n", nbuf, pbuf);
467
468 /*
469 * Set up the buffers.
470 */
471 bufinit();
472
473 /*
474 * Set up the board properties database.
475 */
476 if (!(board_info = propdb_create("board info")))
477 panic("Cannot create board info database");
478
479 if (board_info_set("mem-size", &board_data.mem_size,
480 sizeof(&board_data.mem_size), PROP_CONST, 0))
481 panic("setting mem-size");
482 if (board_info_set("sip0-mac-addr", &board_data.mac_address_pci,
483 sizeof(&board_data.mac_address_pci), PROP_CONST, 0))
484 panic("setting sip0-mac-addr");
485 if (board_info_set("processor-frequency", &board_data.processor_speed,
486 sizeof(&board_data.processor_speed), PROP_CONST, 0))
487 panic("setting processor-frequency");
488 }
489
490
491 static void
492 dumpsys(void)
493 {
494
495 printf("dumpsys: TBD\n");
496 }
497
498 /*
499 * Soft networking interrupts.
500 */
501 void
502 softnet(void)
503 {
504 int isr;
505
506 isr = netisr;
507 netisr = 0;
508
509 #define DONETISR(bit, fn) do { \
510 if (isr & (1 << bit)) \
511 fn(); \
512 } while (0)
513
514 #include <net/netisr_dispatch.h>
515
516 #undef DONETISR
517
518 }
519
520 /*
521 * Soft tty interrupts.
522 */
523 #include "com.h"
524 void
525 softserial(void)
526 {
527 #if NCOM > 0
528 void comsoft(void); /* XXX from dev/ic/com.c */
529
530 comsoft();
531 #endif
532 }
533
534 /*
535 * Halt or reboot the machine after syncing/dumping according to howto.
536 */
537 void
538 cpu_reboot(int howto, char *what)
539 {
540 static int syncing;
541 static char str[256];
542 char *ap = str, *ap1 = ap;
543
544 boothowto = howto;
545 if (!cold && !(howto & RB_NOSYNC) && !syncing) {
546 syncing = 1;
547 vfs_shutdown(); /* sync */
548 resettodr(); /* set wall clock */
549 }
550
551 splhigh();
552
553 if (!cold && (howto & RB_DUMP))
554 dumpsys();
555
556 doshutdownhooks();
557
558 if ((howto & RB_POWERDOWN) == RB_POWERDOWN) {
559 /* Power off here if we know how...*/
560 }
561
562 if (howto & RB_HALT) {
563 printf("halted\n\n");
564
565 goto reboot; /* XXX for now... */
566
567 #ifdef DDB
568 printf("dropping to debugger\n");
569 while(1)
570 Debugger();
571 #endif
572 }
573
574 printf("rebooting\n\n");
575 if (what && *what) {
576 if (strlen(what) > sizeof str - 5)
577 printf("boot string too large, ignored\n");
578 else {
579 strcpy(str, what);
580 ap1 = ap = str + strlen(str);
581 *ap++ = ' ';
582 }
583 }
584 *ap++ = '-';
585 if (howto & RB_SINGLE)
586 *ap++ = 's';
587 if (howto & RB_KDB)
588 *ap++ = 'd';
589 *ap++ = 0;
590 if (ap[-2] == '-')
591 *ap1 = 0;
592
593 /* flush cache for msgbuf */
594 __syncicache((void *)msgbuf_paddr, round_page(MSGBUFSIZE));
595
596 reboot:
597 ppc4xx_reset();
598
599 printf("ppc4xx_reset() failed!\n");
600 #ifdef DDB
601 while(1)
602 Debugger();
603 #else
604 while (1)
605 /* nothing */;
606 #endif
607 }
608
609 int
610 lcsplx(int ipl)
611 {
612
613 return spllower(ipl); /* XXX */
614 }
615
616 void
617 mem_regions(struct mem_region **mem, struct mem_region **avail)
618 {
619
620 *mem = physmemr;
621 *avail = availmemr;
622 }
623