machdep.c revision 1.7 1 /* $NetBSD: machdep.c,v 1.7 2003/03/11 10:40:17 hannken Exp $ */
2
3 /*
4 * Copyright 2001, 2002 Wasabi Systems, Inc.
5 * All rights reserved.
6 *
7 * Written by Eduardo Horvath and Simon Burge for Wasabi Systems, Inc.
8 *
9 * Redistribution and use in source and binary forms, with or without
10 * modification, are permitted provided that the following conditions
11 * are met:
12 * 1. Redistributions of source code must retain the above copyright
13 * notice, this list of conditions and the following disclaimer.
14 * 2. Redistributions in binary form must reproduce the above copyright
15 * notice, this list of conditions and the following disclaimer in the
16 * documentation and/or other materials provided with the distribution.
17 * 3. All advertising materials mentioning features or use of this software
18 * must display the following acknowledgement:
19 * This product includes software developed for the NetBSD Project by
20 * Wasabi Systems, Inc.
21 * 4. The name of Wasabi Systems, Inc. may not be used to endorse
22 * or promote products derived from this software without specific prior
23 * written permission.
24 *
25 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
26 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
27 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
28 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL WASABI SYSTEMS, INC
29 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
30 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
31 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
32 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
33 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
34 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35 * POSSIBILITY OF SUCH DAMAGE.
36 */
37
38 /*
39 * Copyright (C) 1995, 1996 Wolfgang Solfrank.
40 * Copyright (C) 1995, 1996 TooLs GmbH.
41 * All rights reserved.
42 *
43 * Redistribution and use in source and binary forms, with or without
44 * modification, are permitted provided that the following conditions
45 * are met:
46 * 1. Redistributions of source code must retain the above copyright
47 * notice, this list of conditions and the following disclaimer.
48 * 2. Redistributions in binary form must reproduce the above copyright
49 * notice, this list of conditions and the following disclaimer in the
50 * documentation and/or other materials provided with the distribution.
51 * 3. All advertising materials mentioning features or use of this software
52 * must display the following acknowledgement:
53 * This product includes software developed by TooLs GmbH.
54 * 4. The name of TooLs GmbH may not be used to endorse or promote products
55 * derived from this software without specific prior written permission.
56 *
57 * THIS SOFTWARE IS PROVIDED BY TOOLS GMBH ``AS IS'' AND ANY EXPRESS OR
58 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
59 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
60 * IN NO EVENT SHALL TOOLS GMBH BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
61 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
62 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
63 * OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
64 * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
65 * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
66 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
67 */
68
69 #include "opt_compat_netbsd.h"
70 #include "opt_ddb.h"
71 #include "opt_ipkdb.h"
72
73 #include <sys/param.h>
74 #include <sys/buf.h>
75 #include <sys/exec.h>
76 #include <sys/malloc.h>
77 #include <sys/mbuf.h>
78 #include <sys/mount.h>
79 #include <sys/msgbuf.h>
80 #include <sys/proc.h>
81 #include <sys/reboot.h>
82 #include <sys/sa.h>
83 #include <sys/syscallargs.h>
84 #include <sys/syslog.h>
85 #include <sys/systm.h>
86 #include <sys/kernel.h>
87 #include <sys/user.h>
88 #include <sys/boot_flag.h>
89 #include <sys/properties.h>
90
91 #include <uvm/uvm_extern.h>
92
93 #include <net/netisr.h>
94
95 #include <machine/bus.h>
96 #include <machine/powerpc.h>
97 #include <machine/trap.h>
98 #include <machine/walnut.h>
99
100 #include <powerpc/spr.h>
101 #include <powerpc/ibm4xx/dcr405gp.h>
102 #include <machine/bus.h>
103
104 #include <dev/cons.h>
105
106 #ifdef DDB
107 #include <machine/db_machdep.h>
108 #include <ddb/db_extern.h>
109 #endif
110
111 #include "com.h"
112 #if NCOM > 0
113 #include <dev/ic/comreg.h> /* For COM_FREQ */
114 #endif
115
116 /*
117 * Global variables used here and there
118 */
119 struct vm_map *exec_map = NULL;
120 struct vm_map *mb_map = NULL;
121 struct vm_map *phys_map = NULL;
122
123 /*
124 * This should probably be in autoconf! XXX
125 */
126 char cpu_model[80];
127 char machine[] = MACHINE; /* from <machine/param.h> */
128 char machine_arch[] = MACHINE_ARCH; /* from <machine/param.h> */
129
130 extern struct user *proc0paddr;
131
132 char bootpath[256];
133 paddr_t msgbuf_paddr;
134 vaddr_t msgbuf_vaddr;
135
136 #ifdef DDB
137 void *startsym, *endsym;
138 #endif
139
140 int lcsplx(int);
141 void initppc(u_int, u_int, char *, void *);
142
143 static void dumpsys(void);
144 static void install_extint(void (*)(void));
145
146 #define MEMREGIONS 8
147 struct mem_region physmemr[MEMREGIONS]; /* Hard code memory */
148 struct mem_region availmemr[MEMREGIONS]; /* Who's supposed to set these up? */
149
150 struct board_cfg_data board_data;
151 struct propdb *board_info = NULL;
152
153 void
154 initppc(u_int startkernel, u_int endkernel, char *args, void *info_block)
155 {
156 extern int defaulttrap, defaultsize;
157 extern int sctrap, scsize;
158 extern int alitrap, alisize;
159 extern int dsitrap, dsisize;
160 extern int isitrap, isisize;
161 extern int mchktrap, mchksize;
162 extern int tlbimiss4xx, tlbim4size;
163 extern int tlbdmiss4xx, tlbdm4size;
164 extern int pitfitwdog, pitfitwdogsize;
165 extern int debugtrap, debugsize;
166 extern int errata51handler, errata51size;
167 #ifdef DDB
168 extern int ddblow, ddbsize;
169 #endif
170 #ifdef IPKDB
171 extern int ipkdblow, ipkdbsize;
172 #endif
173 int exc;
174 struct cpu_info * const ci = curcpu();
175
176 /* Disable all external interrupts */
177 mtdcr(DCR_UIC0_ER, 0);
178
179 /* Initialize cache info for memcpy, etc. */
180 cpu_probe_cache();
181
182 /* Save info block */
183 if (info_block == NULL)
184 /* XXX why isn't r3 set correctly?!?!? */
185 info_block = (void *)0x8e10;
186 memcpy(&board_data, info_block, sizeof(board_data));
187
188 memset(physmemr, 0, sizeof physmemr);
189 memset(availmemr, 0, sizeof availmemr);
190 physmemr[0].start = 0;
191 physmemr[0].size = board_data.mem_size & ~PGOFSET;
192 /* Lower memory reserved by eval board BIOS */
193 availmemr[0].start = startkernel;
194 availmemr[0].size = board_data.mem_size - availmemr[0].start;
195
196 /*
197 * Initialize lwp0 and current pcb and pmap pointers.
198 */
199 lwp0.l_cpu = ci;
200 lwp0.l_addr = proc0paddr;
201 memset(lwp0.l_addr, 0, sizeof *lwp0.l_addr);
202
203 curpcb = &proc0paddr->u_pcb;
204 curpm = curpcb->pcb_pmreal = curpcb->pcb_pm = pmap_kernel();
205
206 /*
207 * Set up trap vectors
208 */
209 for (exc = EXC_RSVD; exc <= EXC_LAST; exc += 0x100)
210 switch (exc) {
211 default:
212 memcpy((void *)exc, &defaulttrap, (size_t)&defaultsize);
213 break;
214 case EXC_EXI:
215 /*
216 * This one is (potentially) installed during autoconf
217 */
218 break;
219 case EXC_SC:
220 memcpy((void *)EXC_SC, &sctrap, (size_t)&scsize);
221 break;
222 case EXC_ALI:
223 memcpy((void *)EXC_ALI, &alitrap, (size_t)&alisize);
224 break;
225 case EXC_DSI:
226 memcpy((void *)EXC_DSI, &dsitrap, (size_t)&dsisize);
227 break;
228 case EXC_ISI:
229 memcpy((void *)EXC_ISI, &isitrap, (size_t)&isisize);
230 break;
231 case EXC_MCHK:
232 memcpy((void *)EXC_MCHK, &mchktrap, (size_t)&mchksize);
233 break;
234 case EXC_ITMISS:
235 memcpy((void *)EXC_ITMISS, &tlbimiss4xx,
236 (size_t)&tlbim4size);
237 break;
238 case EXC_DTMISS:
239 memcpy((void *)EXC_DTMISS, &tlbdmiss4xx,
240 (size_t)&tlbdm4size);
241 break;
242 /*
243 * EXC_PIT, EXC_FIT, EXC_WDOG handlers
244 * are spaced by 0x10 bytes only..
245 */
246 case EXC_PIT:
247 memcpy((void *)EXC_PIT, &pitfitwdog,
248 (size_t)&pitfitwdogsize);
249 break;
250 case EXC_DEBUG:
251 memcpy((void *)EXC_DEBUG, &debugtrap,
252 (size_t)&debugsize);
253 break;
254 case EXC_DTMISS|EXC_ALI:
255 /* PPC405GP Rev D errata item 51 */
256 memcpy((void *)(EXC_DTMISS|EXC_ALI), &errata51handler,
257 (size_t)&errata51size);
258 break;
259 #if defined(DDB) || defined(IPKDB)
260 case EXC_PGM:
261 #if defined(DDB)
262 memcpy((void *)exc, &ddblow, (size_t)&ddbsize);
263 #elif defined(IPKDB)
264 memcpy((void *)exc, &ipkdblow, (size_t)&ipkdbsize);
265 #endif
266 #endif /* DDB | IPKDB */
267 break;
268 }
269
270 __syncicache((void *)EXC_RST, EXC_LAST - EXC_RST + 0x100);
271 mtspr(SPR_EVPR, 0); /* Set Exception vector base */
272 consinit();
273
274 /* Handle trap instruction as PGM exception */
275 {
276 int dbcr0;
277 asm volatile("mfspr %0,%1":"=r"(dbcr0):"K"(SPR_DBCR0));
278 asm volatile("mtspr %0,%1"::"K"(SPR_DBCR0),"r"(dbcr0 & ~DBCR0_TDE));
279 }
280
281 /*
282 * external interrupt handler install
283 */
284 install_extint(ext_intr);
285
286 /*
287 * Now enable translation (and machine checks/recoverable interrupts).
288 */
289 asm volatile ("mfmsr %0; ori %0,%0,%1; mtmsr %0; isync"
290 : : "r"(0), "K"(PSL_IR|PSL_DR));
291 /* XXXX PSL_ME - With ME set kernel gets stuck... */
292
293 uvm_setpagesize();
294
295 /*
296 * Initialize pmap module.
297 */
298 pmap_bootstrap(startkernel, endkernel);
299
300 consinit();
301
302 #ifdef DEBUG
303 printf("Board config data:\n");
304 printf(" usr_config_ver = %s\n", board_data.usr_config_ver);
305 printf(" rom_sw_ver = %s\n", board_data.rom_sw_ver);
306 printf(" mem_size = %u\n", board_data.mem_size);
307 printf(" mac_address_local = %02x:%02x:%02x:%02x:%02x:%02x\n",
308 board_data.mac_address_local[0], board_data.mac_address_local[1],
309 board_data.mac_address_local[2], board_data.mac_address_local[3],
310 board_data.mac_address_local[4], board_data.mac_address_local[5]);
311 printf(" mac_address_pci = %02x:%02x:%02x:%02x:%02x:%02x\n",
312 board_data.mac_address_pci[0], board_data.mac_address_pci[1],
313 board_data.mac_address_pci[2], board_data.mac_address_pci[3],
314 board_data.mac_address_pci[4], board_data.mac_address_pci[5]);
315 printf(" processor_speed = %u\n", board_data.processor_speed);
316 printf(" plb_speed = %u\n", board_data.plb_speed);
317 printf(" pci_speed = %u\n", board_data.pci_speed);
318 #endif
319
320 #ifdef DDB
321 ddb_init((int)((u_int)endsym - (u_int)startsym), startsym, endsym);
322 if (boothowto & RB_KDB)
323 Debugger();
324 #endif
325 #ifdef IPKDB
326 /*
327 * Now trap to IPKDB
328 */
329 ipkdb_init();
330 if (boothowto & RB_KDB)
331 ipkdb_connect(0);
332 #endif
333 fake_mapiodev = 0;
334 }
335
336 static void
337 install_extint(void (*handler)(void))
338 {
339 extern int extint, extsize;
340 extern u_long extint_call;
341 u_long offset = (u_long)handler - (u_long)&extint_call;
342 int omsr, msr;
343
344 #ifdef DIAGNOSTIC
345 if (offset > 0x1ffffff)
346 panic("install_extint: too far away");
347 #endif
348 asm volatile ("mfmsr %0; andi. %1,%0,%2; mtmsr %1"
349 : "=r"(omsr), "=r"(msr) : "K"((u_short)~PSL_EE));
350 extint_call = (extint_call & 0xfc000003) | offset;
351 memcpy((void *)EXC_EXI, &extint, (size_t)&extsize);
352 __syncicache((void *)&extint_call, sizeof extint_call);
353 __syncicache((void *)EXC_EXI, (int)&extsize);
354 asm volatile ("mtmsr %0" :: "r"(omsr));
355 }
356
357 /*
358 * Machine dependent startup code.
359 */
360
361 char msgbuf[MSGBUFSIZE];
362
363 void
364 cpu_startup(void)
365 {
366 caddr_t v;
367 vaddr_t minaddr, maxaddr;
368 u_int sz, i, base, residual;
369 char pbuf[9];
370
371 /*
372 * Initialize error message buffer (at end of core).
373 */
374 #if 0 /* For some reason this fails... --Artem
375 * Besides, do we really have to put it at the end of core?
376 * Let's use static buffer for now
377 */
378 if (!(msgbuf_vaddr = uvm_km_alloc(kernel_map, round_page(MSGBUFSIZE))))
379 panic("startup: no room for message buffer");
380 for (i = 0; i < btoc(MSGBUFSIZE); i++)
381 pmap_kenter_pa(msgbuf_vaddr + i * NBPG,
382 msgbuf_paddr + i * NBPG, VM_PROT_READ|VM_PROT_WRITE);
383 initmsgbuf((caddr_t)msgbuf_vaddr, round_page(MSGBUFSIZE));
384 #else
385 initmsgbuf((caddr_t)msgbuf, round_page(MSGBUFSIZE));
386 #endif
387
388
389 printf("%s", version);
390 printf("Walnut PowerPC 405GP Evaluation Board\n");
391
392 format_bytes(pbuf, sizeof(pbuf), ctob(physmem));
393 printf("total memory = %s\n", pbuf);
394
395 /*
396 * Find out how much space we need, allocate it,
397 * and then give everything true virtual addresses.
398 */
399 sz = (u_int)allocsys(NULL, NULL);
400 if ((v = (caddr_t)uvm_km_zalloc(kernel_map, round_page(sz))) == 0)
401 panic("startup: no room for tables");
402 if (allocsys(v, NULL) - v != sz)
403 panic("startup: table size inconsistency");
404
405 /*
406 * Now allocate buffers proper. They are different than the above
407 * in that they usually occupy more virtual memory than physical.
408 */
409 sz = MAXBSIZE * nbuf;
410 minaddr = 0;
411 if (uvm_map(kernel_map, (vaddr_t *)&minaddr, round_page(sz),
412 NULL, UVM_UNKNOWN_OFFSET, 0,
413 UVM_MAPFLAG(UVM_PROT_NONE, UVM_PROT_NONE, UVM_INH_NONE,
414 UVM_ADV_NORMAL, 0)) != 0)
415 panic("startup: cannot allocate VM for buffers");
416 buffers = (char *)minaddr;
417 base = bufpages / nbuf;
418 residual = bufpages % nbuf;
419 if (base >= MAXBSIZE) {
420 /* Don't want to alloc more physical mem than ever needed */
421 base = MAXBSIZE;
422 residual = 0;
423 }
424 for (i = 0; i < nbuf; i++) {
425 vsize_t curbufsize;
426 vaddr_t curbuf;
427 struct vm_page *pg;
428
429 curbuf = (vaddr_t)buffers + i * MAXBSIZE;
430 curbufsize = NBPG * (i < residual ? base + 1 : base);
431
432 while (curbufsize) {
433 pg = uvm_pagealloc(NULL, 0, NULL, 0);
434 if (pg == NULL)
435 panic("cpu_startup: not enough memory for "
436 "buffer cache");
437 pmap_kenter_pa(curbuf, VM_PAGE_TO_PHYS(pg),
438 VM_PROT_READ | VM_PROT_WRITE);
439 curbuf += PAGE_SIZE;
440 curbufsize -= PAGE_SIZE;
441 }
442 }
443
444 /*
445 * Allocate a submap for exec arguments. This map effectively
446 * limits the number of processes exec'ing at any time.
447 */
448 exec_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
449 16*NCARGS, VM_MAP_PAGEABLE, FALSE, NULL);
450
451 /*
452 * Allocate a submap for physio
453 */
454 phys_map = uvm_km_suballoc(kernel_map, &minaddr, &maxaddr,
455 VM_PHYS_SIZE, 0, FALSE, NULL);
456
457 /*
458 * No need to allocate an mbuf cluster submap. Mbuf clusters
459 * are allocated via the pool allocator, and we use direct-mapped
460 * pool pages.
461 */
462
463 format_bytes(pbuf, sizeof(pbuf), ptoa(uvmexp.free));
464 printf("avail memory = %s\n", pbuf);
465 format_bytes(pbuf, sizeof(pbuf), bufpages * NBPG);
466 printf("using %u buffers containing %s of memory\n", nbuf, pbuf);
467
468 /*
469 * Set up the buffers.
470 */
471 bufinit();
472
473 /*
474 * Set up the board properties database.
475 */
476 if (!(board_info = propdb_create("board info")))
477 panic("Cannot create board info database");
478
479 if (board_info_set("mem-size", &board_data.mem_size,
480 sizeof(&board_data.mem_size), PROP_CONST, 0))
481 panic("setting mem-size");
482 if (board_info_set("emac-mac-addr", &board_data.mac_address_local,
483 sizeof(&board_data.mac_address_local), PROP_CONST, 0))
484 panic("setting emac-mac-addr");
485 if (board_info_set("sip0-mac-addr", &board_data.mac_address_pci,
486 sizeof(&board_data.mac_address_pci), PROP_CONST, 0))
487 panic("setting sip0-mac-addr");
488 if (board_info_set("processor-frequency", &board_data.processor_speed,
489 sizeof(&board_data.processor_speed), PROP_CONST, 0))
490 panic("setting processor-frequency");
491 #if NCOM > 0
492 {
493 unsigned int comfreq = COM_FREQ * 6;
494 if (board_info_set("com-opb-frequency", &comfreq,
495 sizeof(&comfreq), 0, 0))
496 panic("setting com-opb-frequency");
497 }
498 #endif
499 }
500
501
502 static void
503 dumpsys(void)
504 {
505
506 printf("dumpsys: TBD\n");
507 }
508
509 /*
510 * Soft networking interrupts.
511 */
512 void
513 softnet(void)
514 {
515 int isr;
516
517 isr = netisr;
518 netisr = 0;
519
520 #define DONETISR(bit, fn) do { \
521 if (isr & (1 << bit)) \
522 fn(); \
523 } while (0)
524
525 #include <net/netisr_dispatch.h>
526
527 #undef DONETISR
528
529 }
530
531 /*
532 * Soft tty interrupts.
533 */
534 void
535 softserial(void)
536 {
537 #if NCOM > 0
538 void comsoft(void); /* XXX from dev/ic/com.c */
539
540 comsoft();
541 #endif
542 }
543
544 /*
545 * Halt or reboot the machine after syncing/dumping according to howto.
546 */
547 void
548 cpu_reboot(int howto, char *what)
549 {
550 static int syncing;
551 static char str[256];
552 char *ap = str, *ap1 = ap;
553
554 boothowto = howto;
555 if (!cold && !(howto & RB_NOSYNC) && !syncing) {
556 syncing = 1;
557 vfs_shutdown(); /* sync */
558 resettodr(); /* set wall clock */
559 }
560
561 splhigh();
562
563 if (!cold && (howto & RB_DUMP))
564 dumpsys();
565
566 doshutdownhooks();
567
568 if ((howto & RB_POWERDOWN) == RB_POWERDOWN) {
569 /* Power off here if we know how...*/
570 }
571
572 if (howto & RB_HALT) {
573 printf("halted\n\n");
574
575 goto reboot; /* XXX for now... */
576
577 #ifdef DDB
578 printf("dropping to debugger\n");
579 while(1)
580 Debugger();
581 #endif
582 }
583
584 printf("rebooting\n\n");
585 if (what && *what) {
586 if (strlen(what) > sizeof str - 5)
587 printf("boot string too large, ignored\n");
588 else {
589 strcpy(str, what);
590 ap1 = ap = str + strlen(str);
591 *ap++ = ' ';
592 }
593 }
594 *ap++ = '-';
595 if (howto & RB_SINGLE)
596 *ap++ = 's';
597 if (howto & RB_KDB)
598 *ap++ = 'd';
599 *ap++ = 0;
600 if (ap[-2] == '-')
601 *ap1 = 0;
602
603 /* flush cache for msgbuf */
604 __syncicache((void *)msgbuf_paddr, round_page(MSGBUFSIZE));
605
606 reboot:
607 ppc4xx_reset();
608
609 printf("ppc4xx_reset() failed!\n");
610 #ifdef DDB
611 while(1)
612 Debugger();
613 #else
614 while (1)
615 /* nothing */;
616 #endif
617 }
618
619 int
620 lcsplx(int ipl)
621 {
622
623 return spllower(ipl); /* XXX */
624 }
625
626 void
627 mem_regions(struct mem_region **mem, struct mem_region **avail)
628 {
629
630 *mem = physmemr;
631 *avail = availmemr;
632 }
633