1 /* $NetBSD: ncr5380reg.h,v 1.20 2012/10/27 17:17:59 chs Exp $ */ 2 3 /* 4 * Copyright (c) 1995 Leo Weppelman. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 17 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 18 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 20 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 21 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 22 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 23 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 24 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 25 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 26 */ 27 28 #ifndef _NCR5380REG_H 29 #define _NCR5380REG_H 30 /* 31 * NCR5380 common interface definitions. 32 */ 33 34 /* 35 * Register numbers: (first argument to GET/SET_5380_REG ) 36 */ 37 #define NCR5380_DATA 0 /* Data register */ 38 #define NCR5380_ICOM 1 /* Initiator command register */ 39 #define NCR5380_MODE 2 /* Mode register */ 40 #define NCR5380_TCOM 3 /* Target command register */ 41 #define NCR5380_IDSTAT 4 /* Bus status register */ 42 #define NCR5380_DMSTAT 5 /* DMA status register */ 43 #define NCR5380_TRCV 6 /* Target receive register */ 44 #define NCR5380_IRCV 7 /* Initiator receive register */ 45 46 /* 47 * Definitions for Initiator command register. 48 */ 49 #define SC_A_RST 0x80 /* RW - Assert RST */ 50 #define SC_TEST 0x40 /* W - Test mode */ 51 #define SC_AIP 0x40 /* R - Arbitration in progress */ 52 #define SC_LA 0x20 /* R - Lost arbitration */ 53 #define SC_A_ACK 0x10 /* RW - Assert ACK */ 54 #define SC_A_BSY 0x08 /* RW - Assert BSY */ 55 #define SC_A_SEL 0x04 /* RW - Assert SEL */ 56 #define SC_A_ATN 0x02 /* RW - Assert ATN */ 57 #define SC_ADTB 0x01 /* RW - Assert Data To Bus */ 58 59 /* 60 * Definitions for mode register 61 */ 62 #define SC_B_DMA 0x80 /* RW - Block mode DMA (not on TT!) */ 63 #define SC_T_MODE 0x40 /* RW - Target mode */ 64 #define SC_E_PAR 0x20 /* RW - Enable parity check */ 65 #define SC_E_PARI 0x10 /* RW - Enable parity interrupt */ 66 #define SC_E_EOPI 0x08 /* RW - Enable End Of Process Interrupt */ 67 #define SC_MON_BSY 0x04 /* RW - Monitor BSY */ 68 #define SC_M_DMA 0x02 /* RW - Set DMA mode */ 69 #define SC_ARBIT 0x01 /* RW - Arbitrate */ 70 71 /* 72 * Definitions for tcom register 73 */ 74 #define SC_LBS 0x80 /* RW - Last Byte Send (not on TT!) */ 75 #define SC_A_REQ 0x08 /* RW - Assert REQ */ 76 #define SC_A_MSG 0x04 /* RW - Assert MSG */ 77 #define SC_A_CD 0x02 /* RW - Assert C/D */ 78 #define SC_A_IO 0x01 /* RW - Assert I/O */ 79 80 /* 81 * Definitions for idstat register 82 */ 83 #define SC_S_RST 0x80 /* R - RST is set */ 84 #define SC_S_BSY 0x40 /* R - BSY is set */ 85 #define SC_S_REQ 0x20 /* R - REQ is set */ 86 #define SC_S_MSG 0x10 /* R - MSG is set */ 87 #define SC_S_CD 0x08 /* R - C/D is set */ 88 #define SC_S_IO 0x04 /* R - I/O is set */ 89 #define SC_S_SEL 0x02 /* R - SEL is set */ 90 #define SC_S_PAR 0x01 /* R - Parity bit */ 91 92 /* 93 * Definitions for dmastat register 94 */ 95 #define SC_END_DMA 0x80 /* R - End of DMA */ 96 #define SC_DMA_REQ 0x40 /* R - DMA request */ 97 #define SC_PAR_ERR 0x20 /* R - Parity error */ 98 #define SC_IRQ_SET 0x10 /* R - IRQ is active */ 99 #define SC_PHS_MTCH 0x08 /* R - Phase Match */ 100 #define SC_BSY_ERR 0x04 /* R - Busy error */ 101 #define SC_ATN_STAT 0x02 /* R - State of ATN line */ 102 #define SC_ACK_STAT 0x01 /* R - State of ACK line */ 103 #define SC_S_SEND 0x00 /* W - Start DMA output */ 104 105 #define SC_CLINT { /* Clear interrupts */ \ 106 int i = GET_5380_REG(NCR5380_IRCV); \ 107 } 108 109 110 /* 111 * Definition of SCSI-bus phases. The values are determined by signals 112 * on the SCSI-bus. DO NOT CHANGE! 113 * The values must be used to index the pointers in SCSI-PARMS. 114 */ 115 #define NR_PHASE 8 116 #define PH_DATAOUT 0 117 #define PH_DATAIN 1 118 #define PH_CMD 2 119 #define PH_STATUS 3 120 #define PH_RES1 4 121 #define PH_RES2 5 122 #define PH_MSGOUT 6 123 #define PH_MSGIN 7 124 125 #define PH_OUT(phase) (!(phase & 1)) /* TRUE if output phase */ 126 #define PH_IN(phase) (phase & 1) /* TRUE if input phase */ 127 128 /* 129 * Id of Host-adapter 130 */ 131 #define SC_HOST_ID 0x80 132 133 /* 134 * Base setting for 5380 mode register 135 */ 136 #define IMODE_BASE SC_E_PAR 137 138 /* 139 * SCSI completion status codes, should move to sys/scsi/???? 140 */ 141 #define SCSMASK 0x1e /* status code mask */ 142 #define SCSGOOD 0x00 /* good status */ 143 #define SCSCHKC 0x02 /* check condition */ 144 #define SCSBUSY 0x08 /* busy status */ 145 #define SCSCMET 0x04 /* condition met / good */ 146 147 /* 148 * Return values of check_intr() 149 */ 150 #define INTR_SPURIOUS 0 151 #define INTR_RESEL 2 152 #define INTR_DMA 3 153 154 struct ncr_softc { 155 device_t sc_dev; 156 struct scsipi_channel sc_channel; 157 struct scsipi_adapter sc_adapter; 158 159 /* 160 * Some (pre-SCSI2) devices don't support select with ATN. 161 * If the device responds to select with ATN by going into 162 * command phase (ignoring ATN), then we flag it in the 163 * following bitmask. 164 * We also keep track of which devices have been selected 165 * before. This allows us to not even try raising ATN if 166 * the target doesn't respond to it the first time. 167 */ 168 u_int8_t sc_noselatn; 169 u_int8_t sc_selected; 170 }; 171 172 /* 173 * Max. number of DMA-chains per request 174 */ 175 #define MAXDMAIO (MAXPHYS/PAGE_SIZE + 1) 176 177 /* 178 * Some requests are not contiguous in physical memory. We need to break them 179 * up into contiguous parts for DMA. 180 */ 181 struct dma_chain { 182 u_int dm_count; 183 u_long dm_addr; 184 }; 185 186 /* 187 * Define our issue, free and disconnect queue's. 188 */ 189 typedef struct req_q { 190 struct req_q *next; /* next in free, issue or discon queue */ 191 struct req_q *link; /* next linked command to execute */ 192 struct scsipi_xfer *xs; /* request from high-level driver */ 193 u_short dr_flag; /* driver state */ 194 u_char phase; /* current SCSI phase */ 195 u_char msgout; /* message to send when requested */ 196 u_char targ_id; /* target for command */ 197 u_char targ_lun; /* lun for command */ 198 u_char status; /* returned status byte */ 199 u_char message; /* returned message byte */ 200 u_char *bounceb; /* allocated bounce buffer */ 201 u_char *bouncerp; /* bounce read-pointer */ 202 struct dma_chain dm_chain[MAXDMAIO]; 203 struct dma_chain *dm_cur; /* current DMA-request */ 204 struct dma_chain *dm_last; /* last DMA-request */ 205 long xdata_len; /* length of transfer */ 206 u_char *xdata_ptr; /* virtual address of transfer */ 207 struct scsipi_generic xcmd; /* command to execute */ 208 int xcmd_len; /* command length */ 209 } SC_REQ; 210 211 /* 212 * Values for dr_flag: 213 */ 214 #define DRIVER_IN_DMA 0x01 /* Non-polled DMA activated */ 215 #define DRIVER_AUTOSEN 0x02 /* Doing automatic sense */ 216 #define DRIVER_NOINT 0x04 /* We are booting: no interrupts */ 217 #define DRIVER_DMAOK 0x08 /* DMA can be used on this request */ 218 #define DRIVER_BOUNCING 0x10 /* Using the bounce buffer */ 219 #define DRIVER_LINKCHK 0x20 /* Doing the linked command check */ 220 221 /* XXX: Should go to ncr5380var.h */ 222 static SC_REQ *issue_q = NULL; /* Commands waiting to be issued*/ 223 static SC_REQ *discon_q = NULL; /* Commands disconnected */ 224 static SC_REQ *connected = NULL; /* Command currently connected */ 225 226 /* 227 * Function decls: 228 */ 229 static int transfer_pio(u_char *, u_char *, u_long *, int); 230 static int wait_req_true(void); 231 static int wait_req_false(void); 232 static int scsi_select(SC_REQ *, int); 233 static int handle_message(SC_REQ *, u_int); 234 static void ack_message(void); 235 static void nack_message(SC_REQ *, u_char); 236 static void finish_req(SC_REQ *); 237 static int information_transfer(struct ncr_softc *); 238 static void reselect(struct ncr_softc *); 239 static int check_autosense(SC_REQ *, int); 240 static int reach_msg_out(struct ncr_softc *, u_long); 241 static int check_intr(struct ncr_softc *); 242 static void scsi_reset(void); 243 static void scsi_reset_verbose(struct ncr_softc *, const char *); 244 static void run_main(struct ncr_softc *); 245 static void scsi_main(struct ncr_softc *); 246 static void ncr_ctrl_intr(struct ncr_softc *); 247 static void ncr_tprint(SC_REQ *, const char *, ...); 248 static void ncr_aprint(struct ncr_softc *, const char *, ...); 249 250 static void show_data_sense(struct scsipi_xfer *); 251 static void show_request(SC_REQ *, const char *); 252 /* static void show_phase(SC_REQ *, int); */ 253 static void show_signals(u_char, u_char); 254 255 #endif /* _NCR5380REG_H */ 256
Indexes created Sat Sep 20 22:09:52 GMT 2025