xref: /src/sys/arch/mips/alchemy/include/aureg.h

/* $NetBSD: aureg.h,v 1.3 2003/04/01 17:30:09 hpeyerl Exp $ */

/*
 * Copyright 2002 Wasabi Systems, Inc.
 * All rights reserved.
 *
 * Written by Simon Burge for Wasabi Systems, Inc.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed for the NetBSD Project by
 *      Wasabi Systems, Inc.
 * 4. The name of Wasabi Systems, Inc. may not be used to endorse
 *    or promote products derived from this software without specific prior
 *    written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
 * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
 * POSSIBILITY OF SUCH DAMAGE.
 */

/*  *********************************************************************
    *  Naming schemes for constants in these files:
    *
    *  M_xxx            MASK constant (identifies bits in a register).
    *                   For multi-bit fields, all bits in the field will
    *                   be set.
    *
    *  K_xxx            "Code" constant (value for data in a multi-bit
    *                   field).  The value is right justified.
    *
    *  V_xxx            "Value" constant.  This is the same as the
    *                   corresponding "K_xxx" constant, except it is
    *                   shifted to the correct position in the register.
    *
    *  S_xxx            SHIFT constant.  This is the number of bits that
    *                   a field value (code) needs to be shifted
    *                   (towards the left) to put the value in the right
    *                   position for the register.
    *
    *  A_xxx            ADDRESS constant.  This will be a physical
    *                   address.  Use the MIPS_PHYS_TO_KSEG1 macro to
    *                   generate a K1SEG address.
    *
    *  R_xxx            RELATIVE offset constant.  This is an offset from
    *                   an A_xxx constant (usually the first register in
    *                   a group).
    *
    *  G_xxx(X)         GET value.  This macro obtains a multi-bit field
    *                   from a register, masks it, and shifts it to
    *                   the bottom of the register (retrieving a K_xxx
    *                   value, for example).
    *
    *  V_xxx(X)         VALUE.  This macro computes the value of a
    *                   K_xxx constant shifted to the correct position
    *                   in the register.
    ********************************************************************* */

#if !defined(__ASSEMBLER__)
#define _MAKE64(x) ((uint64_t)(x))
#define _MAKE32(x) ((uint32_t)(x))
#else
#define _MAKE64(x) (x)
#define _MAKE32(x) (x)
#endif

/* Make a mask for 1 bit at position 'n' */
#define _MAKEMASK1_64(n) (_MAKE64(1) << _MAKE64(n))
#define _MAKEMASK1_32(n) (_MAKE32(1) << _MAKE32(n))

/* Make a mask for 'v' bits at position 'n' */
#define _MAKEMASK_64(v,n) (_MAKE64((_MAKE64(1)<<(v))-1) << _MAKE64(n))
#define _MAKEMASK_32(v,n) (_MAKE32((_MAKE32(1)<<(v))-1) << _MAKE32(n))

/* Make a value at 'v' at bit position 'n' */
#define _MAKEVALUE_64(v,n) (_MAKE64(v) << _MAKE64(n))
#define _MAKEVALUE_32(v,n) (_MAKE32(v) << _MAKE32(n))

#define _GETVALUE_64(v,n,m) ((_MAKE64(v) & _MAKE64(m)) >> _MAKE64(n))
#define _GETVALUE_32(v,n,m) ((_MAKE32(v) & _MAKE32(m)) >> _MAKE32(n))


/************************************************************************/
/********************   AC97 Controller registers   *********************/
/************************************************************************/
#define	AC97_BASE		0x10000000

#define	AC97_CONFIG		0x00

#define	  M_AC97CFG_RS		  _MAKEMASK1_32(0)
#define	  M_AC97CFG_SN		  _MAKEMASK1_32(1)
#define	  M_AC97CFG_SG		  _MAKEMASK1_32(2)

#define	  S_AC97CFG_XS		  _MAKE32(12)
#define	  M_AC97CFG_XS		  _MAKEMASK_32(10)
#define	  V_AC97CFG_XS(x)	  _MAKEVALUE_32(x, S_AC97CFG_XS)
#define	  G_AC97CFG_XS(x)	  _GETVALUE_32(x, S_AC97CFG_XS, M_AC97CFG_XS)

#define	  S_AC97CFG_RC		  _MAKE32(12)
#define	  M_AC97CFG_RC		  _MAKEMASK_32(10)
#define	  V_AC97CFG_RC(x)	  _MAKEVALUE_32(x, S_AC97CFG_RC)
#define	  G_AC97CFG_RC(x)	  _GETVALUE_32(x, S_AC97CFG_RC, M_AC97CFG_RC)

#define	AC97_STATUS		0x04

#define	  M_AC97STAT_RF		  _MAKEMASK1_32(0)
#define	  M_AC97STAT_RE		  _MAKEMASK1_32(1)
#define	  M_AC97STAT_TF		  _MAKEMASK1_32(3)
#define	  M_AC97STAT_TE		  _MAKEMASK1_32(4)
#define	  M_AC97STAT_CP		  _MAKEMASK1_32(6)
#define	  M_AC97STAT_RD		  _MAKEMASK1_32(7)
#define	  M_AC97STAT_RO		  _MAKEMASK1_32(8)
#define	  M_AC97STAT_RU		  _MAKEMASK1_32(9)
#define	  M_AC97STAT_XO		  _MAKEMASK1_32(10)
#define	  M_AC97STAT_XU		  _MAKEMASK1_32(11)

#define	AC97_DATA		0x08

#define	  S_AC97DATA_DATA	  _MAKE32(0)
#define	  M_AC97DATA_DATA	  _MAKEMASK_32(16)
#define	  V_AC97DATA_DATA(x)	  _MAKEVALUE_32(x, S_AC97DATA_DATA)
#define	  G_AC97DATA_DATA(x)	  _GETVALUE_32(x, S_AC97DATA_DATA, M_AC97DATA_DATA)

#define	AC97_COMMAND		0x0c

#define	  S_AC97CMD_INDEX	  _MAKE32(0)
#define	  M_AC97CMD_INDEX	  _MAKEMASK_32(7)
#define	  V_AC97CMD_INDEX(x)	  _MAKEVALUE_32(x, S_AC97CMD_INDEX)
#define	  G_AC97CMD_INDEX(x)	  _GETVALUE_32(x, S_AC97CMD_INDEX, M_AC97CMD_INDEX)

#define	  M_AC97CMD_RW		  _MAKEMASK1_32(7)

#define	  S_AC97CMD_DATA	  _MAKE32(16)
#define	  M_AC97CMD_DATA	  _MAKEMASK_32(16)
#define	  V_AC97CMD_DATA(x)	  _MAKEVALUE_32(x, S_AC97CMD_DATA)
#define	  G_AC97CMD_DATA(x)	  _GETVALUE_32(x, S_AC97CMD_DATA, M_AC97CMD_DATA)

#define	AC97_COMMAND_RESPONSE	0x0c

#define	  S_AC97CMDRESP_DATA	  _MAKE32(0)
#define	  M_AC97CMDRESP_DATA	  _MAKEMASK_32(16)
#define	  V_AC97CMDRESP_DATA(x)	  _MAKEVALUE_32(x, S_AC97CMDRESP_DATA)
#define	  G_AC97CMDRESP_DATA(x)	  _GETVALUE_32(x, S_AC97CMDRESP_DATA, M_AC97CMDRESP_DATA)

#define	AC97_ENABLE		0x10

#define	  M_AC97EN_CE		  _MAKEMASK1_32(0)
#define	  M_AC97EN_D		  _MAKEMASK1_32(1)

#define	AC97_SIZE		0x14		/* size of register set */

/************************************************************************/
/***********************   USB Host registers   *************************/
/************************************************************************/
#define	USBH_BASE		0x10100000

#define	USBH_ENABLE		0x7fffc
#define	  UE_RD			  0x00000010	/* reset done */
#define	  UE_CE			  0x00000008	/* clock enable */
#define	  UE_E			  0x00000004	/* enable */
#define	  UE_C			  0x00000002	/* coherent */
#define	  UE_BE			  0x00000001	/* big-endian */

#define	USBH_SIZE		0x80000		/* size of register set */

/************************************************************************/
/**********************   USB Device registers   ************************/
/************************************************************************/
#define	USBD_BASE		0x10200000

/************************************************************************/
/*************************   IRDA registers   ***************************/
/************************************************************************/
#define	IRDA_BASE		0x10300000

/************************************************************************/
/******************   Interrupt Controller registers   ******************/
/************************************************************************/

#define	IC0_BASE	0x10400000
#define	IC1_BASE	0x11800000

/*
 * The *_READ registers read the current value of the register
 * The *_SET registers set to 1 all bits that are written 1
 * The *_CLEAR registers clear to zero all bits that are written as 1
 */
#define	IC_CONFIG0_READ			0x40	/* See table below */
#define	IC_CONFIG0_SET			0x40
#define	IC_CONFIG0_CLEAR		0x44

#define	IC_CONFIG1_READ			0x48	/* See table below */
#define	IC_CONFIG1_SET			0x48
#define	IC_CONFIG1_CLEAR		0x4c

#define	IC_CONFIG2_READ			0x50	/* See table below */
#define	IC_CONFIG2_SET			0x50
#define	IC_CONFIG2_CLEAR		0x54

#define	IC_REQUEST0_INT			0x54	/* Show active interrupts on request 0 */

#define	IC_SOURCE_READ			0x58	/* Interrupt source */
#define	IC_SOURCE_SET			0x58	/*  0 - test bit used as source */
#define	IC_SOURCE_CLEAR			0x5c	/*  1 - peripheral/GPIO used as source */

#define	IC_REQUEST1_INT			0x5c	/* Show active interrupts on request 1 */

#define	IC_ASSIGN_REQUEST_READ		0x60	/* Assigns the interrupt to one of the */
#define	IC_ASSIGN_REQUEST_SET		0x60	/* CPU requests (0 - assign to request 1, */
#define	IC_ASSIGN_REQUEST_CLEAR		0x64	/* 1 - assign to request 0) */

#define	IC_WAKEUP_READ			0x68	/* Controls whether the interrupt can */
#define	IC_WAKEUP_SET			0x68	/* cause a wakeup from IDLE */
#define	IC_WAKEUP_CLEAR			0x6c

#define	IC_MASK_READ			0x70	/* Enables/Disables the interrupt */
#define	IC_MASK_SET			0x70
#define	IC_MASK_CLEAR			0x74

#define	IC_RISING_EDGE_DETECT		0x78	/* Check/clear rising edge interrupts */
#define	IC_RISING_EDGE_DETECT_CLEAR	0x78

#define	IC_FAILLING_EDGE_DETECT		0x7c	/* Check/clear falling edge interrupts */
#define	IC_FAILLING_EDGE_DETECT_CLEAR	0x7c

#define	IC_TEST_BIT			0x80	/* single bit source select testing register */

/*
 *	Interrupt Configuration Register Functions
 *
 *	Cfg2[n]	Cfg1[n]	Cfg0[n]		Function
 *	   0	   0	   0		Interrupts Disabled
 *	   0	   0	   1		Rising Edge Enabled
 *	   0	   1	   0		Falling Edge Enabled
 *	   0	   1	   1		Rising and Falling Edge Enabled
 *	   1	   0	   0		Interrupts Disabled
 *	   1	   0	   1		High Level Enabled
 *	   1	   1	   0		Low Level Enabled
 *	   1	   1	   1		Both Levels and Both Edges Enabled
 */

/************************************************************************/
/**********************   Ethernet MAC registers   **********************/
/************************************************************************/

#define	MAC0_BASE		0x10500000
#define	MAC1_BASE		0x10510000
#define	MACx_SIZE		0x28

#define	AU1500_MAC0_BASE	0x11500000	/* Grr, difference on Au1500 */
#define	AU1500_MAC1_BASE	0x11510000	/* Grr, difference on Au1500 */

#if 0
#define	MAC_CONTROL		0x00	/* operation mode and address filter */
#define	  MC_RA			  0x80000000  /* Receive All */
#define	  MC_EM			  0x40000000  /* Endian Mode - data buffer is big endian */
#define	  MC_DRO		  0x00800000  /* Disable Receive Own */
#define	  MC_LM_MASK		  0x00600000  /* Loopback Operating Mode - mask */
#define	  MC_LM_NORMAL		  0x00600000
#define	  MC_LM_INTERNAL	  0x00400000
#define	  MC_LM_EXTERNAL	  0x00200000
#define	  MC_F			  0x00100000  /* Full duplex mode */
#define	  MC_PM			  0x00080000  /* Pall all Multicast */
#define	  MC_PR			  0x00040000  /* Promiscious Mode */
#define	  MC_IF			  0x00020000  /* Inverse Filtering */
#define	  MC_PB			  0x00010000  /* Pass Bad frames */
#define	  MC_HO			  0x00008000  /* Hash Only filtering mode */
#define	  MC_HP			  0x00002000  /* Hash/Perfect filtering mode */
#define	  MC_LC			  0x00001000  /* Late Collision control */
#define	  MC_DB			  0x00000800  /* Disable Broadcast frames */
#define	  MC_DR			  0x00000400  /* Disable Retry */
#define	  MC_AP			  0x00000100  /* Automatic Pad stripping */
#define	  MC_BL_MASK		  0x000000c0  /* Backoff Limit mask */
#define	  MC_BL_SHIFT		  6
#define	  MC_DC			  0x00000020  /* Deferral Check */
#define	  MC_TE			  0x00000008  /* Transmitter Enable */
#define	  MC_RE			  0x00000004  /* Receiver Enable */
#define	MAC_ADDRESS_HIGH	0x04	/* high 16 bits of the MAC address */
#define	MAC_ADDRESS_LOW		0x08	/* lower 32 bits of the MAC address */
#define	MAC_MCAST_HASH_HIGH	0x0c	/* high 16 bits of mcat hash address */
#define	MAC_MCAST_HASH_LOW	0x10	/* low 32 bits of mcat hash address */
#define	MAC_MII_CONTROL		0x14	/* control of PHY management interface */
#define	  MMC_PHY_ADDR_MASK	  0x0000f800  /* PHY Address mask */
#define	  MMC_PHY_ADDR_SHIFT	  11
#define	  MMC_MIIREG_MASK	  0x000007c0  /* MII Register mask */
#define	  MMC_MIIREG_SHIFT	  6
#define	  MMC_MW		  0x00000002  /* MII Write */
#define	  MMC_MB		  0x00000001  /* MII Busy */
#define	MAC_MII_DATA		0x18	/* data to/from PHY */
#define	MAC_FLOW_CONTROL	0x1c	/* frame generation control */
#define	  MFC_PT_MASK		  0xffff0000  /* Pause Time mask */
#define	  MFC_PT_SHIFT		  16
#define	  MFC_PC		  0x00000004  /* Pass Control frame */
#define	  MFC_FE		  0x00000002  /* Flow Control enable */
#define	  MFC_FB		  0x00000001  /* Flow control Busy */
#define	MAC_VLAN1_TAG		0x20	/* VLAN1 tag */
#define	MAC_VLAN2_TAG		0x24	/* VLAN2 tag */
#endif

#define	MAC0_ENABLE		0x10520000
#define	MAC1_ENABLE		0x10520004
#define	MACENx_SIZE		0x04

#define	AU1500_MAC0_ENABLE	0x11520000	/* Grr, difference on Au1500 */
#define	AU1500_MAC1_ENABLE	0x11520004	/* Grr, difference on Au1500 */

#if 0
#define	  ME_DR			  0x40		/* DMA reset */
#define	  ME_R2			  0x20		/* Reset2 */
#define	  ME_R1			  0x10		/* Reset1 */
#define	  ME_C			  0x08		/* Cacheable */
#define	  ME_TS			  0x04		/* Toss */
#define	  ME_R0			  0x02		/* Reset0 */
#define	  ME_EN			  0x01		/* Clock Enable */
#endif

#define	MAC0_DMA_BASE		0x14004000
#define	MAC1_DMA_BASE		0x14004200
#define	MACx_DMA_SIZE		0x140
#if 0
#define	MAC_TXDMA		0x000
#define	MAC_RXDMA		0x100
#define	MAC_TXQLEN		4
#define	MAC_RXQLEN		4

/* MAC Transmit Status registers */
#define	MTS_PR		0x80000000  /* Packet Retry */
#define	MTS_HB		0x00004000  /* ?!?? */
#define	MTS_CC_MASK	0x00003c00  /* Collision Count mask */
#define	MTS_CC_SHIFT	10
#define MTS_LO		0x00000200  /* Late collision Observed */
#define	MTS_DF		0x00000100  /* Deferred */
#define	MTS_UR		0x00000080  /* Underrun */
#define	MTS_EC		0x00000040  /* Excessive Collisions */
#define	MTS_LC		0x00000020  /* Late Collision */
#define	MTS_ED		0x00000010  /* Excessive Deferral */
#define	MFS_LS		0x00000008  /* LoSs of carrier */
#define	MFS_NC		0x00000004  /* No Carrier */
#define	MFS_JT		0x00000002  /* Jabber Timeout */
#define	MFS_FA		0x00000001  /* Frame Aborted */

/* MAC Transmit Buffer Address/Enable registers */
#define	MTBAE_ADDR_MASK	0xffffffe0  /* Buffer address */
#define	MTBAE_CB_MASK	0x0000000c  /* Current (DMA) Buffer */
#define MTBAE_CB_SHIFT	2
#define MTBAE_DONE	0x00000002  /* transation DONE */
#define	MTBAE_EN	0x00000001  /* MAC DMA Enable */

/* MAC Transmit Buffer Length registers */
#define	MTBL_LEN_MASK	0x000007ff  /* buffer LENgth */
#define MTBL_LEN_SHIFT	0

/* MAC Receive Status registers */
#define	MRS_MI		0x80000000  /* MIssed frame */
#define	MRS_PF		0x40000000  /* Packet Filter */
#define	MRS_FF		0x20000000  /* Filtering Fail */
#define	MRS_BF		0x10000000  /* Broadcast Frame */
#define	MRS_MF		0x08000000  /* Multicast Frame */
#define	MRS_UC		0x04000000  /* Unsupported Control frame */
#define	MRS_CF		0x02000000  /* Control Frame */
#define	MRS_LE		0x01000000  /* Length Error */
#define	MRS_V2		0x00800000  /* Vlan2 ID */
#define	MRS_V1		0x00400000  /* Vlan1 ID */
#define	MRS_CR		0x00200000  /* CRC error */
#define	MRS_DB		0x00100000  /* Dribbling Bit */
#define	MRS_ME		0x00080000  /* MII Error */
#define	MRS_FT		0x00040000  /* Frame Type */
#define	MRS_CS		0x00020000  /* Collision Seen */
#define	MRS_FL		0x00010000  /* Frame too Long */
#define	MRS_RF		0x00008000  /* Runt Frame */
#define	MRS_WT		0x00004000  /* Watchdog Timeout */
#define	MRS_L_MASK	0x00003fff  /* frame Length mask*/
#define	MRS_L_SHIFT	0

/* MAC Receive Buffer Address/Enable registers */
#define	MRBAE_ADDR_MASK	0xffffffe0  /* Buffer address */
#define	MRBAE_CB_MASK	0x0000000c  /* Current (DMA) Buffer */
#define	MRBAE_CB_SHIFT	2
#define	MRBAE_DN	0x00000002  /* transation DoNe */
#define	MRBAE_EN	0x00000001  /* MAC DMA Enable */
#endif

/************************************************************************/
/********************   Secure Digital registers   **********************/
/************************************************************************/
#define	SD0_BASE		0x10600000
#define	SD1_BASE		0x10680000

/************************************************************************/
/*************************   I^2S registers   ***************************/
/************************************************************************/
#define	I2S_BASE		0x11000000

/************************************************************************/
/**************************   UART registers   **************************/
/************************************************************************/

#define	UART0_BASE	0x11100000
#define	UART1_BASE	0x11200000
#define	UART2_BASE	0x11300000
#define	UART3_BASE	0x11400000

#define	UART_RXDATA		0x000	/* Received Data FIFO (R) */
#define	UART_TXDATA		0x004	/* Transmit Data FIFO (W) */
#define	UART_INTERRUPT_ENABLE	0x008	/* Interrupt Enable Register (R/W) */
#define	  UIE_MIE		  0x8	/* Modem Status Interrupt enable */
#define	  UIE_LIE		  0x4	/* Line Status Interrupt enable */
#define	  UIE_TIE		  0x2	/* Transmit Interrupt Enable */
#define	  UIE_RIE		  0x1	/* Receive Interrupt Enable */
#define	UART_INTERRUPT_CAUSE	0x00c	/* Pending Interrupt Cause Register (R) */
#define	  UIC_IID_MASK		  0xe	/* mask for Interrupt IDentifier */
#define	  UIC_IID_MS		  0x0	/* Modem Status */
#define	  UIC_IID_TBA		  0x2	/* Transmit Buffer Available */
#define	  UIC_IID_RDA		  0x4	/* Receive Data Available */
#define	  UIC_IID_RLS		  0x6	/* Receive Line Status */
#define	  UIC_IID_CTO		  0xc	/* Character Time Out */
#define	  UIC_IP		  0x1	/* XXX-no?-XXX Interrupt Pending */
#define	UART_FIFO_CONTROL	0x010	/* FIFO Control Register (W) */
#define	  UFC_RFT_0		  0x00	/* Receiver FIFO Threshold of 0 chars */
#define	  UFC_RFT_4		  0x40	/* Receiver FIFO Threshold of 4 chars */
#define	  UFC_RFT_8		  0x80	/* Receiver FIFO Threshold of 8 chars */
#define	  UFC_RFT_12		  0xc0	/* Receiver FIFO Threshold of 12 chars */
#define	  UFC_TFT_0		  0x00	/* Transmit FIFO Threshold of 0 chars */
#define	  UFC_TFT_4		  0x10	/* Transmit FIFO Threshold of 4 chars */
#define	  UFC_TFT_8		  0x20	/* Transmit FIFO Threshold of 8 chars */
#define	  UFC_TFT_12		  0x30	/* Transmit FIFO Threshold of 12 chars */
#define	  UFC_MS		  0x08	/* Mode Select */
#define	  UFC_TR		  0x04	/* Transmitter Reset */
#define	  UFC_RR		  0x02	/* Receiver Reset */
#define	  UFC_FE		  0x01	/* FIFO Enable */
#define	UART_LINE_CONTROL	0x014	/* Line Control Register (R/W) */
#define	  ULC_SB		  0x40	/* Send Break */
#define	  ULC_PAR_MASK		  0x30	/* mask for PARity select */
#define	  ULC_PAR_ODD		  0x00	/* odd parity */
#define	  ULC_PAR_EVEN		  0x10	/* even parity */
#define	  ULC_PAR_MARK		  0x20	/* mark parity */
#define	  ULC_PAR_ZERO		  0x30	/* zero parity */
#define	  ULC_PE		  0x08	/* Parity Enable */
#define	  ULC_ST		  0x04	/* 1.5 or 2 stop bits */
#define	  ULC_WLS_MASK		  0x03	/* mask for Word Length Select */
#define	  ULC_WLS_5		  0x00	/* 5 bits per serial word */
#define	  ULC_WLS_6		  0x01	/* 6 bits */
#define	  ULC_WLS_7		  0x02	/* 7 bits */
#define	  ULC_WLS_8		  0x03	/* 8 bits */
#define	UART_MODEM_CONTROL	0x018	/* Modem Line Control Register (UART 4 only) (R/W) */
#define	  UMC_LB		  0x10	/* Loop Back */
#define	  UMC_X2		  0x08	/* eXternal line 2 state */
#define	  UMC_X1		  0x04	/* eXternal line 1 state */
#define	  UMC_RT		  0x02	/* Request To send */
#define	  UMC_DT		  0x01	/* Data Terminal ready */
#define	UART_LINE_STATUS	0x01c	/* Line Status Register (R/W) */
#define	  ULS_RF		  0x80	/* Receiver FIFO contains error */
#define	  ULS_TE		  0x40	/* Transmit shift register Empty */
#define	  ULS_TFE		  0x20	/* Transmit FIFO Empty */
#define	  ULS_BI		  0x10	/* Break Indication */
#define	  ULS_FE		  0x08	/* Framing Error */
#define	  ULS_PE		  0x04	/* Parity Error */
#define	  ULS_OE		  0x02	/* Overrun Error */
#define	  ULS_DR		  0x01	/* Data Ready */
#define	  ULS_RCV_MASK		  0x1f	/* mask for incoming data or error */
#define	UART_MODEM_STATUS	0x020	/* Modem Line Status Register  (UART 4 only) (R/W) */
#define	  UMS_CD		  0x80	/* data Carrier Detect */
#define	  UMS_RI		  0x40	/* Ring Indication */
#define	  UMS_DS		  0x20	/* Data Set ready */
#define	  UMS_CT		  0x10	/* Clear To send */
#define	  UMS_DD		  0x08	/* Delta DCD */
#define	  UMS_TRI		  0x04	/* Terminate Ring Indication */
#define	  UMS_DR		  0x02	/* Delta DSR */
#define	  UMS_DC		  0x01	/* Delta CTS */
#define	UART_CLOCK_DIVIDER	0x028	/* Baud Rate Clock Divider (16bit) */
#define	UART_MODULE_CONTROL	0x100	/* Module Control Register */
#define	  UMC_CE		  0x2	/* Module Clock Enable */
#define	  UMC_ME		  0x1	/* Module Enable */

/************************************************************************/
/*************************   SSI registers   ****************************/
/************************************************************************/
#define	SSI0_BASE		0x11600000
#define	SSI1_BASE		0x11680000

/************************************************************************/
/************************   GPIO2 registers   ***************************/
/************************************************************************/
#define	GPIO2_BASE		0x11700000

/************************************************************************/
/******************   Programmable Counter registers   ******************/
/************************************************************************/

#define	SYS_BASE		0x11900000

#define	PC_BASE			SYS_BASE

#define	PC_TRIM0		0x00		/* PC0 Divide (16 bits) */
#define	PC_COUNTER_WRITE0	0x04		/* set PC0 */
#define	PC_MATCH0_0		0x08		/* match counter & interrupt */
#define	PC_MATCH1_0		0x0c		/* match counter & interrupt */
#define	PC_MATCH2_0		0x10		/* match counter & interrupt */
#define	PC_COUNTER_CONTROL	0x14		/* Programmable Counter Control */
#define	  CC_E1S		  0x00800000	/* Enable PC1 write status */
#define	  CC_T1S		  0x00100000	/* Trim PC1 write status */
#define	  CC_M21		  0x00080000	/* Match 2 of PC1 write status */
#define	  CC_M11		  0x00040000	/* Match 1 of PC1 write status */
#define	  CC_M01		  0x00020000	/* Match 0 of PC1 write status */
#define	  CC_C1S		  0x00010000	/* PC1 write status */
#define	  CC_BP			  0x00004000	/* Bypass OSC (use GPIO1) */
#define	  CC_EN1		  0x00002000	/* Enable PC1 */
#define	  CC_BT1		  0x00001000	/* Bypass Trim on PC1 */
#define	  CC_EN0		  0x00000800	/* Enable PC0 */
#define	  CC_BT0		  0x00000400	/* Bypass Trim on PC0 */
#define	  CC_EO			  0x00000100	/* Enable Oscillator */
#define	  CC_E0S		  0x00000080	/* Enable PC0 write status */
#define	  CC_32S		  0x00000020	/* 32.768kHz OSC status */
#define	  CC_T0S		  0x00000010	/* Trim PC0 write status */
#define	  CC_M20		  0x00000008	/* Match 2 of PC0 write status */
#define	  CC_M10		  0x00000004	/* Match 1 of PC0 write status */
#define	  CC_M00		  0x00000002	/* Match 0 of PC0 write status */
#define	  CC_C0S		  0x00000001	/* PC0 write status */
#define	PC_COUNTER_READ_0	0x40		/* get PC0 */
#define	PC_TRIM1		0x44		/* PC1 Divide (16 bits) */
#define	PC_COUNTER_WRITE1	0x48		/* set PC1 */
#define	PC_MATCH0_1		0x4c		/* match counter & interrupt */
#define	PC_MATCH1_1		0x50		/* match counter & interrupt */
#define	PC_MATCH2_1		0x54		/* match counter & interrupt */
#define	PC_COUNTER_READ_1	0x58		/* get PC1 */

#define	PC_SIZE			0x5c		/* size of register set */
#define	PC_RATE			32768		/* counter rate is 32.768kHz */

/************************************************************************/
/*******************   Frequency Generator Registers   ******************/
/************************************************************************/

#define SYS_FREQCTRL0		(SYS_BASE + 0x20)
#define SFC_FRDIV2(f)		(f<<22)		/* 29:22. Freq Divider 2 */
#define SFC_FE2			(1<<21)		/* Freq generator output enable 2 */
#define SFC_FS2			(1<<20)		/* Freq generator source 2 */
#define SFC_FRDIV1(f)		(f<<12)		/* 19:12. Freq Divider 1 */
#define SFC_FE1			(1<<11)		/* Freq generator output enable 1 */
#define SFC_FS1			(1<<10)		/* Freq generator source 1 */
#define SFC_FRDIV0(f)		(f<<2)		/* 9:2. Freq Divider 0 */
#define SFC_FE0			2		/* Freq generator output enable 0 */
#define SFC_FS0			1		/* Freq generator source 0 */

#define SYS_FREQCTRL1		(SYS_BASE + 0x24)
#define SFC_FRDIV5(f)		(f<<22)		/* 29:22. Freq Divider 5 */
#define SFC_FE5			(1<<21)		/* Freq generator output enable 5 */
#define SFC_FS5			(1<<20)		/* Freq generator source 5 */
#define SFC_FRDIV4(f)		(f<<12)		/* 19:12. Freq Divider 4 */
#define SFC_FE4			(1<<11)		/* Freq generator output enable 4 */
#define SFC_FS4			(1<<10)		/* Freq generator source 4 */
#define SFC_FRDIV3(f)		(f<<2)		/* 9:2. Freq Divider 3 */
#define SFC_FE3			2		/* Freq generator output enable 3 */
#define SFC_FS3			1		/* Freq generator source 3 */

/************************************************************************/
/******************   Clock Source Control Registers   ******************/
/************************************************************************/

#define SYS_CLKSRC		(SYS_BASE + 0x28)
#define  SCS_ME1(n)		(n<<27)		/* EXTCLK1 Clock Mux input select */
#define  SCS_ME0(n)		(n<<22)		/* EXTCLK0 Clock Mux input select */
#define  SCS_MPC(n)		(n<<17)		/* PCI clock mux input select */
#define  SCS_MUH(n)		(n<<12)		/* USB Host clock mux input select */
#define  SCS_MUD(n)		(n<<7)		/* USB Device clock mux input select */
#define   SCS_MEx_AUX		0x1		/* Aux clock */
#define   SCS_MEx_FREQ0		0x2		/* FREQ0 */
#define   SCS_MEx_FREQ1		0x3		/* FREQ1 */
#define   SCS_MEx_FREQ2		0x4		/* FREQ2 */
#define   SCS_MEx_FREQ3		0x5		/* FREQ3 */
#define   SCS_MEx_FREQ4		0x6		/* FREQ4 */
#define   SCS_MEx_FREQ5		0x7		/* FREQ5 */
#define  SCS_DE1		(1<<26)		/* EXTCLK1 clock divider select */
#define  SCS_CE1		(1<<25)		/* EXTCLK1 clock select */
#define  SCS_DE0		(1<<21)		/* EXTCLK0 clock divider select */
#define  SCS_CE0		(1<<20)		/* EXTCLK0 clock select */
#define  SCS_DPC		(1<<16)		/* PCI clock divider select */
#define  SCS_CPC		(1<<15)		/* PCI clock select */
#define  SCS_DUH		(1<<11)		/* USB Host clock divider select */
#define  SCS_CUH		(1<<10)		/* USB Host clock select */
#define  SCS_DUD		(1<<6)		/* USB Device clock divider select */
#define  SCS_CUD		(1<<5)		/* USB Device clock select */

/************************************************************************/
/***************************   PLL Control  *****************************/
/************************************************************************/

#define SYS_CPUPLL		(SYS_BASE + 0x60)
#define SYS_AUXPLL              (SYS_BASE + 0x64)