if_ae.c revision 1.44
1 /* $NetBSD: if_ae.c,v 1.44 2024/06/29 12:11:11 riastradh Exp $ */ 2 /*- 3 * Copyright (c) 2006 Urbana-Champaign Independent Media Center. 4 * Copyright (c) 2006 Garrett D'Amore. 5 * All rights reserved. 6 * 7 * This code was written by Garrett D'Amore for the Champaign-Urbana 8 * Community Wireless Network Project. 9 * 10 * Redistribution and use in source and binary forms, with or 11 * without modification, are permitted provided that the following 12 * conditions are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above 16 * copyright notice, this list of conditions and the following 17 * disclaimer in the documentation and/or other materials provided 18 * with the distribution. 19 * 3. All advertising materials mentioning features or use of this 20 * software must display the following acknowledgements: 21 * This product includes software developed by the Urbana-Champaign 22 * Independent Media Center. 23 * This product includes software developed by Garrett D'Amore. 24 * 4. Urbana-Champaign Independent Media Center's name and Garrett 25 * D'Amore's name may not be used to endorse or promote products 26 * derived from this software without specific prior written permission. 27 * 28 * THIS SOFTWARE IS PROVIDED BY THE URBANA-CHAMPAIGN INDEPENDENT 29 * MEDIA CENTER AND GARRETT D'AMORE ``AS IS'' AND ANY EXPRESS OR 30 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED 31 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 32 * ARE DISCLAIMED. IN NO EVENT SHALL THE URBANA-CHAMPAIGN INDEPENDENT 33 * MEDIA CENTER OR GARRETT D'AMORE BE LIABLE FOR ANY DIRECT, INDIRECT, 34 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 35 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 36 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 37 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, 38 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 39 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF 40 * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 41 */ 42 /*- 43 * Copyright (c) 1998, 1999, 2000, 2002 The NetBSD Foundation, Inc. 44 * All rights reserved. 45 * 46 * This code is derived from software contributed to The NetBSD Foundation 47 * by Jason R. Thorpe of the Numerical Aerospace Simulation Facility, 48 * NASA Ames Research Center; and by Charles M. Hannum. 49 * 50 * Redistribution and use in source and binary forms, with or without 51 * modification, are permitted provided that the following conditions 52 * are met: 53 * 1. Redistributions of source code must retain the above copyright 54 * notice, this list of conditions and the following disclaimer. 55 * 2. Redistributions in binary form must reproduce the above copyright 56 * notice, this list of conditions and the following disclaimer in the 57 * documentation and/or other materials provided with the distribution. 58 * 59 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 60 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 61 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 62 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 63 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 64 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 65 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 66 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 67 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 68 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 69 * POSSIBILITY OF SUCH DAMAGE. 70 */ 71 72 /* 73 * Device driver for the onboard ethernet MAC found on the AR5312 74 * chip's AHB bus. 75 * 76 * This device is very simliar to the tulip in most regards, and 77 * the code is directly derived from NetBSD's tulip.c. However, it 78 * is different enough that it did not seem to be a good idea to 79 * add further complexity to the tulip driver, so we have our own. 80 * 81 * Also tulip has a lot of complexity in it for various parts/options 82 * that we don't need, and on these little boxes with only ~8MB RAM, we 83 * don't want any extra bloat. 84 */ 85 86 /* 87 * TODO: 88 * 89 * 1) Find out about BUS_MODE_ALIGN16B. This chip can apparently align 90 * inbound packets on a half-word boundary, which would make life easier 91 * for TCP/IP. (Aligning IP headers on a word.) 92 * 93 * 2) There is stuff in original tulip to shut down the device when reacting 94 * to a change in link status. Is that needed. 95 * 96 * 3) Test with variety of 10/100 HDX/FDX scenarios. 97 * 98 */ 99 100 #include <sys/cdefs.h> 101 __KERNEL_RCSID(0, "$NetBSD: if_ae.c,v 1.44 2024/06/29 12:11:11 riastradh Exp $"); 102 103 104 #include <sys/param.h> 105 #include <sys/bus.h> 106 #include <sys/callout.h> 107 #include <sys/device.h> 108 #include <sys/endian.h> 109 #include <sys/errno.h> 110 #include <sys/intr.h> 111 #include <sys/ioctl.h> 112 #include <sys/kernel.h> 113 #include <sys/mbuf.h> 114 #include <sys/socket.h> 115 116 #include <uvm/uvm_extern.h> 117 118 #include <net/if.h> 119 #include <net/if_dl.h> 120 #include <net/if_media.h> 121 #include <net/if_ether.h> 122 123 #include <net/bpf.h> 124 125 #include <dev/mii/mii.h> 126 #include <dev/mii/miivar.h> 127 #include <dev/mii/mii_bitbang.h> 128 129 #include <mips/atheros/include/arbusvar.h> 130 #include <mips/atheros/dev/aereg.h> 131 #include <mips/atheros/dev/aevar.h> 132 133 static const struct { 134 uint32_t txth_opmode; /* OPMODE bits */ 135 const char *txth_name; /* name of mode */ 136 } ae_txthresh[] = { 137 { OPMODE_TR_32, "32 words" }, 138 { OPMODE_TR_64, "64 words" }, 139 { OPMODE_TR_128, "128 words" }, 140 { OPMODE_TR_256, "256 words" }, 141 { OPMODE_SF, "store and forward mode" }, 142 { 0, NULL }, 143 }; 144 145 static int ae_match(device_t, struct cfdata *, void *); 146 static void ae_attach(device_t, device_t, void *); 147 static int ae_detach(device_t, int); 148 static int ae_activate(device_t, enum devact); 149 150 static int ae_ifflags_cb(struct ethercom *); 151 static void ae_reset(struct ae_softc *); 152 static void ae_idle(struct ae_softc *, uint32_t); 153 154 static void ae_start(struct ifnet *); 155 static void ae_watchdog(struct ifnet *); 156 static int ae_ioctl(struct ifnet *, u_long, void *); 157 static int ae_init(struct ifnet *); 158 static void ae_stop(struct ifnet *, int); 159 160 static void ae_shutdown(void *); 161 162 static void ae_rxdrain(struct ae_softc *); 163 static int ae_add_rxbuf(struct ae_softc *, int); 164 165 static int ae_enable(struct ae_softc *); 166 static void ae_disable(struct ae_softc *); 167 static void ae_power(int, void *); 168 169 static void ae_filter_setup(struct ae_softc *); 170 171 static int ae_intr(void *); 172 static void ae_rxintr(struct ae_softc *); 173 static void ae_txintr(struct ae_softc *); 174 175 static void ae_mii_tick(void *); 176 static void ae_mii_statchg(struct ifnet *); 177 178 static int ae_mii_readreg(device_t, int, int, uint16_t *); 179 static int ae_mii_writereg(device_t, int, int, uint16_t); 180 181 #ifdef AE_DEBUG 182 #define DPRINTF(sc, x) if ((sc)->sc_ethercom.ec_if.if_flags & IFF_DEBUG) \ 183 printf x 184 #else 185 #define DPRINTF(sc, x) /* nothing */ 186 #endif 187 188 #ifdef AE_STATS 189 static void ae_print_stats(struct ae_softc *); 190 #endif 191 192 CFATTACH_DECL_NEW(ae, sizeof(struct ae_softc), 193 ae_match, ae_attach, ae_detach, ae_activate); 194 195 /* 196 * ae_match: 197 * 198 * Check for a device match. 199 */ 200 int 201 ae_match(device_t parent, struct cfdata *cf, void *aux) 202 { 203 struct arbus_attach_args *aa = aux; 204 205 if (strcmp(aa->aa_name, cf->cf_name) == 0) 206 return 1; 207 208 return 0; 209 210 } 211 212 /* 213 * ae_attach: 214 * 215 * Attach an ae interface to the system. 216 */ 217 void 218 ae_attach(device_t parent, device_t self, void *aux) 219 { 220 const uint8_t *enaddr; 221 prop_data_t ea; 222 struct ae_softc *sc = device_private(self); 223 struct arbus_attach_args *aa = aux; 224 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 225 struct mii_data * const mii = &sc->sc_mii; 226 int i, error; 227 228 sc->sc_dev = self; 229 230 callout_init(&sc->sc_tick_callout, 0); 231 232 printf(": Atheros AR531X 10/100 Ethernet\n"); 233 234 /* 235 * Try to get MAC address. 236 */ 237 ea = prop_dictionary_get(device_properties(sc->sc_dev), "mac-address"); 238 if (ea == NULL) { 239 printf("%s: unable to get mac-addr property\n", 240 device_xname(sc->sc_dev)); 241 return; 242 } 243 KASSERT(prop_object_type(ea) == PROP_TYPE_DATA); 244 KASSERT(prop_data_size(ea) == ETHER_ADDR_LEN); 245 enaddr = prop_data_data_nocopy(ea); 246 247 /* Announce ourselves. */ 248 printf("%s: Ethernet address %s\n", device_xname(sc->sc_dev), 249 ether_sprintf(enaddr)); 250 251 sc->sc_cirq = aa->aa_cirq; 252 sc->sc_mirq = aa->aa_mirq; 253 sc->sc_st = aa->aa_bst; 254 sc->sc_dmat = aa->aa_dmat; 255 256 SIMPLEQ_INIT(&sc->sc_txfreeq); 257 SIMPLEQ_INIT(&sc->sc_txdirtyq); 258 259 /* 260 * Map registers. 261 */ 262 sc->sc_size = aa->aa_size; 263 if ((error = bus_space_map(sc->sc_st, aa->aa_addr, sc->sc_size, 0, 264 &sc->sc_sh)) != 0) { 265 printf("%s: unable to map registers, error = %d\n", 266 device_xname(sc->sc_dev), error); 267 goto fail_0; 268 } 269 270 /* 271 * Allocate the control data structures, and create and load the 272 * DMA map for it. 273 */ 274 if ((error = bus_dmamem_alloc(sc->sc_dmat, 275 sizeof(struct ae_control_data), PAGE_SIZE, 0, &sc->sc_cdseg, 276 1, &sc->sc_cdnseg, 0)) != 0) { 277 printf("%s: unable to allocate control data, error = %d\n", 278 device_xname(sc->sc_dev), error); 279 goto fail_1; 280 } 281 282 if ((error = bus_dmamem_map(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg, 283 sizeof(struct ae_control_data), (void **)&sc->sc_control_data, 284 BUS_DMA_COHERENT)) != 0) { 285 printf("%s: unable to map control data, error = %d\n", 286 device_xname(sc->sc_dev), error); 287 goto fail_2; 288 } 289 290 if ((error = bus_dmamap_create(sc->sc_dmat, 291 sizeof(struct ae_control_data), 1, 292 sizeof(struct ae_control_data), 0, 0, &sc->sc_cddmamap)) != 0) { 293 printf("%s: unable to create control data DMA map, " 294 "error = %d\n", device_xname(sc->sc_dev), error); 295 goto fail_3; 296 } 297 298 if ((error = bus_dmamap_load(sc->sc_dmat, sc->sc_cddmamap, 299 sc->sc_control_data, sizeof(struct ae_control_data), NULL, 300 0)) != 0) { 301 printf("%s: unable to load control data DMA map, error = %d\n", 302 device_xname(sc->sc_dev), error); 303 goto fail_4; 304 } 305 306 /* 307 * Create the transmit buffer DMA maps. 308 */ 309 for (i = 0; i < AE_TXQUEUELEN; i++) { 310 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 311 AE_NTXSEGS, MCLBYTES, 0, 0, 312 &sc->sc_txsoft[i].txs_dmamap)) != 0) { 313 printf("%s: unable to create tx DMA map %d, " 314 "error = %d\n", device_xname(sc->sc_dev), i, error); 315 goto fail_5; 316 } 317 } 318 319 /* 320 * Create the receive buffer DMA maps. 321 */ 322 for (i = 0; i < AE_NRXDESC; i++) { 323 if ((error = bus_dmamap_create(sc->sc_dmat, MCLBYTES, 1, 324 MCLBYTES, 0, 0, &sc->sc_rxsoft[i].rxs_dmamap)) != 0) { 325 printf("%s: unable to create rx DMA map %d, " 326 "error = %d\n", device_xname(sc->sc_dev), i, error); 327 goto fail_6; 328 } 329 sc->sc_rxsoft[i].rxs_mbuf = NULL; 330 } 331 332 /* 333 * Reset the chip to a known state. 334 */ 335 ae_reset(sc); 336 337 /* 338 * From this point forward, the attachment cannot fail. A failure 339 * before this point releases all resources that may have been 340 * allocated. 341 */ 342 sc->sc_flags |= AE_ATTACHED; 343 344 /* 345 * Initialize our media structures. This may probe the MII, if 346 * present. 347 */ 348 mii->mii_ifp = ifp; 349 mii->mii_readreg = ae_mii_readreg; 350 mii->mii_writereg = ae_mii_writereg; 351 mii->mii_statchg = ae_mii_statchg; 352 sc->sc_ethercom.ec_mii = mii; 353 ifmedia_init(&mii->mii_media, 0, ether_mediachange, ether_mediastatus); 354 mii_attach(sc->sc_dev, mii, 0xffffffff, MII_PHY_ANY, 355 MII_OFFSET_ANY, 0); 356 357 if (LIST_FIRST(&mii->mii_phys) == NULL) { 358 ifmedia_add(&mii->mii_media, IFM_ETHER | IFM_NONE, 0, NULL); 359 ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_NONE); 360 } else 361 ifmedia_set(&mii->mii_media, IFM_ETHER | IFM_AUTO); 362 363 sc->sc_tick = ae_mii_tick; 364 365 strcpy(ifp->if_xname, device_xname(sc->sc_dev)); 366 ifp->if_softc = sc; 367 ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST; 368 sc->sc_if_flags = ifp->if_flags; 369 ifp->if_ioctl = ae_ioctl; 370 ifp->if_start = ae_start; 371 ifp->if_watchdog = ae_watchdog; 372 ifp->if_init = ae_init; 373 ifp->if_stop = ae_stop; 374 IFQ_SET_READY(&ifp->if_snd); 375 376 /* 377 * We can support 802.1Q VLAN-sized frames. 378 */ 379 sc->sc_ethercom.ec_capabilities |= ETHERCAP_VLAN_MTU; 380 381 /* 382 * Attach the interface. 383 */ 384 if_attach(ifp); 385 if_deferred_start_init(ifp, NULL); 386 ether_ifattach(ifp, enaddr); 387 ether_set_ifflags_cb(&sc->sc_ethercom, ae_ifflags_cb); 388 389 rnd_attach_source(&sc->sc_rnd_source, device_xname(sc->sc_dev), 390 RND_TYPE_NET, RND_FLAG_DEFAULT); 391 392 /* 393 * Make sure the interface is shutdown during reboot. 394 */ 395 sc->sc_sdhook = shutdownhook_establish(ae_shutdown, sc); 396 if (sc->sc_sdhook == NULL) 397 printf("%s: WARNING: unable to establish shutdown hook\n", 398 device_xname(sc->sc_dev)); 399 400 /* 401 * Add a suspend hook to make sure we come back up after a 402 * resume. 403 */ 404 sc->sc_powerhook = powerhook_establish(device_xname(sc->sc_dev), 405 ae_power, sc); 406 if (sc->sc_powerhook == NULL) 407 printf("%s: WARNING: unable to establish power hook\n", 408 device_xname(sc->sc_dev)); 409 return; 410 411 /* 412 * Free any resources we've allocated during the failed attach 413 * attempt. Do this in reverse order and fall through. 414 */ 415 fail_6: 416 for (i = 0; i < AE_NRXDESC; i++) { 417 if (sc->sc_rxsoft[i].rxs_dmamap != NULL) 418 bus_dmamap_destroy(sc->sc_dmat, 419 sc->sc_rxsoft[i].rxs_dmamap); 420 } 421 fail_5: 422 for (i = 0; i < AE_TXQUEUELEN; i++) { 423 if (sc->sc_txsoft[i].txs_dmamap != NULL) 424 bus_dmamap_destroy(sc->sc_dmat, 425 sc->sc_txsoft[i].txs_dmamap); 426 } 427 bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap); 428 fail_4: 429 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap); 430 fail_3: 431 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 432 sizeof(struct ae_control_data)); 433 fail_2: 434 bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg); 435 fail_1: 436 bus_space_unmap(sc->sc_st, sc->sc_sh, sc->sc_size); 437 fail_0: 438 return; 439 } 440 441 /* 442 * ae_activate: 443 * 444 * Handle device activation/deactivation requests. 445 */ 446 int 447 ae_activate(device_t self, enum devact act) 448 { 449 struct ae_softc *sc = device_private(self); 450 451 switch (act) { 452 case DVACT_DEACTIVATE: 453 if_deactivate(&sc->sc_ethercom.ec_if); 454 return 0; 455 default: 456 return EOPNOTSUPP; 457 } 458 } 459 460 /* 461 * ae_detach: 462 * 463 * Detach a device interface. 464 */ 465 int 466 ae_detach(device_t self, int flags) 467 { 468 struct ae_softc *sc = device_private(self); 469 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 470 struct ae_rxsoft *rxs; 471 struct ae_txsoft *txs; 472 int i; 473 474 /* 475 * Succeed now if there isn't any work to do. 476 */ 477 if ((sc->sc_flags & AE_ATTACHED) == 0) 478 return (0); 479 480 /* Unhook our tick handler. */ 481 if (sc->sc_tick) 482 callout_stop(&sc->sc_tick_callout); 483 484 /* Detach all PHYs */ 485 mii_detach(&sc->sc_mii, MII_PHY_ANY, MII_OFFSET_ANY); 486 487 rnd_detach_source(&sc->sc_rnd_source); 488 ether_ifdetach(ifp); 489 if_detach(ifp); 490 491 /* Delete all remaining media. */ 492 ifmedia_fini(&sc->sc_mii.mii_media); 493 494 for (i = 0; i < AE_NRXDESC; i++) { 495 rxs = &sc->sc_rxsoft[i]; 496 if (rxs->rxs_mbuf != NULL) { 497 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); 498 m_freem(rxs->rxs_mbuf); 499 rxs->rxs_mbuf = NULL; 500 } 501 bus_dmamap_destroy(sc->sc_dmat, rxs->rxs_dmamap); 502 } 503 for (i = 0; i < AE_TXQUEUELEN; i++) { 504 txs = &sc->sc_txsoft[i]; 505 if (txs->txs_mbuf != NULL) { 506 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 507 m_freem(txs->txs_mbuf); 508 txs->txs_mbuf = NULL; 509 } 510 bus_dmamap_destroy(sc->sc_dmat, txs->txs_dmamap); 511 } 512 bus_dmamap_unload(sc->sc_dmat, sc->sc_cddmamap); 513 bus_dmamap_destroy(sc->sc_dmat, sc->sc_cddmamap); 514 bus_dmamem_unmap(sc->sc_dmat, (void *)sc->sc_control_data, 515 sizeof(struct ae_control_data)); 516 bus_dmamem_free(sc->sc_dmat, &sc->sc_cdseg, sc->sc_cdnseg); 517 518 shutdownhook_disestablish(sc->sc_sdhook); 519 powerhook_disestablish(sc->sc_powerhook); 520 521 bus_space_unmap(sc->sc_st, sc->sc_sh, sc->sc_size); 522 523 524 return (0); 525 } 526 527 /* 528 * ae_shutdown: 529 * 530 * Make sure the interface is stopped at reboot time. 531 */ 532 static void 533 ae_shutdown(void *arg) 534 { 535 struct ae_softc *sc = arg; 536 537 ae_stop(&sc->sc_ethercom.ec_if, 1); 538 } 539 540 /* 541 * ae_start: [ifnet interface function] 542 * 543 * Start packet transmission on the interface. 544 */ 545 static void 546 ae_start(struct ifnet *ifp) 547 { 548 struct ae_softc *sc = ifp->if_softc; 549 struct mbuf *m0, *m; 550 struct ae_txsoft *txs; 551 bus_dmamap_t dmamap; 552 int error, firsttx, nexttx, lasttx = 1, ofree, seg; 553 554 DPRINTF(sc, ("%s: ae_start: sc_flags 0x%08x, if_flags 0x%08x\n", 555 device_xname(sc->sc_dev), sc->sc_flags, ifp->if_flags)); 556 557 558 if ((ifp->if_flags & IFF_RUNNING) == 0) 559 return; 560 561 /* 562 * Remember the previous number of free descriptors and 563 * the first descriptor we'll use. 564 */ 565 ofree = sc->sc_txfree; 566 firsttx = sc->sc_txnext; 567 568 DPRINTF(sc, ("%s: ae_start: txfree %d, txnext %d\n", 569 device_xname(sc->sc_dev), ofree, firsttx)); 570 571 /* 572 * Loop through the send queue, setting up transmit descriptors 573 * until we drain the queue, or use up all available transmit 574 * descriptors. 575 */ 576 while ((txs = SIMPLEQ_FIRST(&sc->sc_txfreeq)) != NULL && 577 sc->sc_txfree != 0) { 578 /* 579 * Grab a packet off the queue. 580 */ 581 IFQ_POLL(&ifp->if_snd, m0); 582 if (m0 == NULL) 583 break; 584 m = NULL; 585 586 dmamap = txs->txs_dmamap; 587 588 /* 589 * Load the DMA map. If this fails, the packet either 590 * didn't fit in the allotted number of segments, or we were 591 * short on resources. In this case, we'll copy and try 592 * again. 593 */ 594 if (((mtod(m0, uintptr_t) & 3) != 0) || 595 bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, m0, 596 BUS_DMA_WRITE | BUS_DMA_NOWAIT) != 0) { 597 MGETHDR(m, M_DONTWAIT, MT_DATA); 598 if (m == NULL) { 599 printf("%s: unable to allocate Tx mbuf\n", 600 device_xname(sc->sc_dev)); 601 break; 602 } 603 MCLAIM(m, &sc->sc_ethercom.ec_tx_mowner); 604 if (m0->m_pkthdr.len > MHLEN) { 605 MCLGET(m, M_DONTWAIT); 606 if ((m->m_flags & M_EXT) == 0) { 607 printf("%s: unable to allocate Tx " 608 "cluster\n", device_xname(sc->sc_dev)); 609 m_freem(m); 610 break; 611 } 612 } 613 m_copydata(m0, 0, m0->m_pkthdr.len, mtod(m, void *)); 614 m->m_pkthdr.len = m->m_len = m0->m_pkthdr.len; 615 error = bus_dmamap_load_mbuf(sc->sc_dmat, dmamap, 616 m, BUS_DMA_WRITE | BUS_DMA_NOWAIT); 617 if (error) { 618 printf("%s: unable to load Tx buffer, " 619 "error = %d\n", device_xname(sc->sc_dev), 620 error); 621 break; 622 } 623 } 624 625 /* 626 * Ensure we have enough descriptors free to describe 627 * the packet. 628 */ 629 if (dmamap->dm_nsegs > sc->sc_txfree) { 630 /* 631 * Not enough free descriptors to transmit this 632 * packet. We haven't committed to anything yet, 633 * so just unload the DMA map, put the packet 634 * back on the queue, and punt. Notify the upper 635 * layer that there are no more slots left. 636 * 637 * XXX We could allocate an mbuf and copy, but 638 * XXX it is worth it? 639 */ 640 bus_dmamap_unload(sc->sc_dmat, dmamap); 641 if (m != NULL) 642 m_freem(m); 643 break; 644 } 645 646 IFQ_DEQUEUE(&ifp->if_snd, m0); 647 if (m != NULL) { 648 m_freem(m0); 649 m0 = m; 650 } 651 652 /* 653 * WE ARE NOW COMMITTED TO TRANSMITTING THE PACKET. 654 */ 655 656 /* Sync the DMA map. */ 657 bus_dmamap_sync(sc->sc_dmat, dmamap, 0, dmamap->dm_mapsize, 658 BUS_DMASYNC_PREWRITE); 659 660 /* 661 * Initialize the transmit descriptors. 662 */ 663 for (nexttx = sc->sc_txnext, seg = 0; 664 seg < dmamap->dm_nsegs; 665 seg++, nexttx = AE_NEXTTX(nexttx)) { 666 /* 667 * If this is the first descriptor we're 668 * enqueueing, don't set the OWN bit just 669 * yet. That could cause a race condition. 670 * We'll do it below. 671 */ 672 sc->sc_txdescs[nexttx].ad_status = 673 (nexttx == firsttx) ? 0 : ADSTAT_OWN; 674 sc->sc_txdescs[nexttx].ad_bufaddr1 = 675 dmamap->dm_segs[seg].ds_addr; 676 sc->sc_txdescs[nexttx].ad_ctl = 677 (dmamap->dm_segs[seg].ds_len << 678 ADCTL_SIZE1_SHIFT) | 679 (nexttx == (AE_NTXDESC - 1) ? 680 ADCTL_ER : 0); 681 lasttx = nexttx; 682 } 683 684 KASSERT(lasttx != -1); 685 686 /* Set `first segment' and `last segment' appropriately. */ 687 sc->sc_txdescs[sc->sc_txnext].ad_ctl |= ADCTL_Tx_FS; 688 sc->sc_txdescs[lasttx].ad_ctl |= ADCTL_Tx_LS; 689 690 #ifdef AE_DEBUG 691 if (ifp->if_flags & IFF_DEBUG) { 692 printf(" txsoft %p transmit chain:\n", txs); 693 for (seg = sc->sc_txnext;; seg = AE_NEXTTX(seg)) { 694 printf(" descriptor %d:\n", seg); 695 printf(" ad_status: 0x%08x\n", 696 sc->sc_txdescs[seg].ad_status); 697 printf(" ad_ctl: 0x%08x\n", 698 sc->sc_txdescs[seg].ad_ctl); 699 printf(" ad_bufaddr1: 0x%08x\n", 700 sc->sc_txdescs[seg].ad_bufaddr1); 701 printf(" ad_bufaddr2: 0x%08x\n", 702 sc->sc_txdescs[seg].ad_bufaddr2); 703 if (seg == lasttx) 704 break; 705 } 706 } 707 #endif 708 709 /* Sync the descriptors we're using. */ 710 AE_CDTXSYNC(sc, sc->sc_txnext, dmamap->dm_nsegs, 711 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 712 713 /* 714 * Store a pointer to the packet so we can free it later, 715 * and remember what txdirty will be once the packet is 716 * done. 717 */ 718 txs->txs_mbuf = m0; 719 txs->txs_firstdesc = sc->sc_txnext; 720 txs->txs_lastdesc = lasttx; 721 txs->txs_ndescs = dmamap->dm_nsegs; 722 723 /* Advance the tx pointer. */ 724 sc->sc_txfree -= dmamap->dm_nsegs; 725 sc->sc_txnext = nexttx; 726 727 SIMPLEQ_REMOVE_HEAD(&sc->sc_txfreeq, txs_q); 728 SIMPLEQ_INSERT_TAIL(&sc->sc_txdirtyq, txs, txs_q); 729 730 /* 731 * Pass the packet to any BPF listeners. 732 */ 733 bpf_mtap(ifp, m0, BPF_D_OUT); 734 } 735 736 if (sc->sc_txfree != ofree) { 737 DPRINTF(sc, ("%s: packets enqueued, IC on %d, OWN on %d\n", 738 device_xname(sc->sc_dev), lasttx, firsttx)); 739 /* 740 * Cause a transmit interrupt to happen on the 741 * last packet we enqueued. 742 */ 743 sc->sc_txdescs[lasttx].ad_ctl |= ADCTL_Tx_IC; 744 AE_CDTXSYNC(sc, lasttx, 1, 745 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 746 747 /* 748 * The entire packet chain is set up. Give the 749 * first descriptor to the chip now. 750 */ 751 sc->sc_txdescs[firsttx].ad_status |= ADSTAT_OWN; 752 AE_CDTXSYNC(sc, firsttx, 1, 753 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 754 755 /* Wake up the transmitter. */ 756 /* XXX USE AUTOPOLLING? */ 757 AE_WRITE(sc, CSR_TXPOLL, TXPOLL_TPD); 758 AE_BARRIER(sc); 759 760 /* Set a watchdog timer in case the chip flakes out. */ 761 ifp->if_timer = 5; 762 } 763 } 764 765 /* 766 * ae_watchdog: [ifnet interface function] 767 * 768 * Watchdog timer handler. 769 */ 770 static void 771 ae_watchdog(struct ifnet *ifp) 772 { 773 struct ae_softc *sc = ifp->if_softc; 774 int doing_transmit; 775 776 doing_transmit = (! SIMPLEQ_EMPTY(&sc->sc_txdirtyq)); 777 778 if (doing_transmit) { 779 printf("%s: transmit timeout\n", device_xname(sc->sc_dev)); 780 if_statinc(ifp, if_oerrors); 781 } 782 else 783 printf("%s: spurious watchdog timeout\n", device_xname(sc->sc_dev)); 784 785 (void) ae_init(ifp); 786 787 /* Try to get more packets going. */ 788 ae_start(ifp); 789 } 790 791 /* If the interface is up and running, only modify the receive 792 * filter when changing to/from promiscuous mode. Otherwise return 793 * ENETRESET so that ether_ioctl will reset the chip. 794 */ 795 static int 796 ae_ifflags_cb(struct ethercom *ec) 797 { 798 struct ifnet *ifp = &ec->ec_if; 799 struct ae_softc *sc = ifp->if_softc; 800 u_short change = ifp->if_flags ^ sc->sc_if_flags; 801 802 if ((change & ~(IFF_CANTCHANGE | IFF_DEBUG)) != 0) 803 return ENETRESET; 804 else if ((change & IFF_PROMISC) != 0) 805 ae_filter_setup(sc); 806 return 0; 807 } 808 809 /* 810 * ae_ioctl: [ifnet interface function] 811 * 812 * Handle control requests from the operator. 813 */ 814 static int 815 ae_ioctl(struct ifnet *ifp, u_long cmd, void *data) 816 { 817 struct ae_softc *sc = ifp->if_softc; 818 int s, error; 819 820 s = splnet(); 821 822 error = ether_ioctl(ifp, cmd, data); 823 if (error == ENETRESET) { 824 if (ifp->if_flags & IFF_RUNNING) { 825 /* 826 * Multicast list has changed. Set the 827 * hardware filter accordingly. 828 */ 829 ae_filter_setup(sc); 830 } 831 error = 0; 832 } 833 834 /* Try to get more packets going. */ 835 if (AE_IS_ENABLED(sc)) 836 ae_start(ifp); 837 838 sc->sc_if_flags = ifp->if_flags; 839 splx(s); 840 return (error); 841 } 842 843 /* 844 * ae_intr: 845 * 846 * Interrupt service routine. 847 */ 848 int 849 ae_intr(void *arg) 850 { 851 struct ae_softc *sc = arg; 852 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 853 uint32_t status, rxstatus, txstatus; 854 int handled = 0, txthresh; 855 856 DPRINTF(sc, ("%s: ae_intr\n", device_xname(sc->sc_dev))); 857 858 #ifdef DEBUG 859 if (AE_IS_ENABLED(sc) == 0) 860 panic("%s: ae_intr: not enabled", device_xname(sc->sc_dev)); 861 #endif 862 863 /* 864 * If the interface isn't running, the interrupt couldn't 865 * possibly have come from us. 866 */ 867 if ((ifp->if_flags & IFF_RUNNING) == 0 || 868 !device_is_active(sc->sc_dev)) { 869 printf("spurious?!?\n"); 870 return (0); 871 } 872 873 for (;;) { 874 status = AE_READ(sc, CSR_STATUS); 875 if (status) { 876 AE_WRITE(sc, CSR_STATUS, status); 877 AE_BARRIER(sc); 878 } 879 880 if ((status & sc->sc_inten) == 0) 881 break; 882 883 handled = 1; 884 885 rxstatus = status & sc->sc_rxint_mask; 886 txstatus = status & sc->sc_txint_mask; 887 888 if (rxstatus) { 889 /* Grab new any new packets. */ 890 ae_rxintr(sc); 891 892 if (rxstatus & STATUS_RU) { 893 printf("%s: receive ring overrun\n", 894 device_xname(sc->sc_dev)); 895 /* Get the receive process going again. */ 896 AE_WRITE(sc, CSR_RXPOLL, RXPOLL_RPD); 897 AE_BARRIER(sc); 898 break; 899 } 900 } 901 902 if (txstatus) { 903 /* Sweep up transmit descriptors. */ 904 ae_txintr(sc); 905 906 if (txstatus & STATUS_TJT) 907 printf("%s: transmit jabber timeout\n", 908 device_xname(sc->sc_dev)); 909 910 if (txstatus & STATUS_UNF) { 911 /* 912 * Increase our transmit threshold if 913 * another is available. 914 */ 915 txthresh = sc->sc_txthresh + 1; 916 if (ae_txthresh[txthresh].txth_name != NULL) { 917 uint32_t opmode; 918 /* Idle the transmit process. */ 919 opmode = AE_READ(sc, CSR_OPMODE); 920 ae_idle(sc, OPMODE_ST); 921 922 sc->sc_txthresh = txthresh; 923 opmode &= ~(OPMODE_TR | OPMODE_SF); 924 opmode |= 925 ae_txthresh[txthresh].txth_opmode; 926 printf("%s: transmit underrun; new " 927 "threshold: %s\n", 928 device_xname(sc->sc_dev), 929 ae_txthresh[txthresh].txth_name); 930 931 /* 932 * Set the new threshold and restart 933 * the transmit process. 934 */ 935 AE_WRITE(sc, CSR_OPMODE, opmode); 936 AE_BARRIER(sc); 937 } 938 /* 939 * XXX Log every Nth underrun from 940 * XXX now on? 941 */ 942 } 943 } 944 945 if (status & (STATUS_TPS | STATUS_RPS)) { 946 if (status & STATUS_TPS) 947 printf("%s: transmit process stopped\n", 948 device_xname(sc->sc_dev)); 949 if (status & STATUS_RPS) 950 printf("%s: receive process stopped\n", 951 device_xname(sc->sc_dev)); 952 (void) ae_init(ifp); 953 break; 954 } 955 956 if (status & STATUS_SE) { 957 const char *str; 958 959 if (status & STATUS_TX_ABORT) 960 str = "tx abort"; 961 else if (status & STATUS_RX_ABORT) 962 str = "rx abort"; 963 else 964 str = "unknown error"; 965 966 printf("%s: fatal system error: %s\n", 967 device_xname(sc->sc_dev), str); 968 (void) ae_init(ifp); 969 break; 970 } 971 972 /* 973 * Not handled: 974 * 975 * Transmit buffer unavailable -- normal 976 * condition, nothing to do, really. 977 * 978 * General purpose timer experied -- we don't 979 * use the general purpose timer. 980 * 981 * Early receive interrupt -- not available on 982 * all chips, we just use RI. We also only 983 * use single-segment receive DMA, so this 984 * is mostly useless. 985 */ 986 } 987 988 /* Try to get more packets going. */ 989 if_schedule_deferred_start(ifp); 990 991 if (handled) 992 rnd_add_uint32(&sc->sc_rnd_source, status); 993 return (handled); 994 } 995 996 /* 997 * ae_rxintr: 998 * 999 * Helper; handle receive interrupts. 1000 */ 1001 static void 1002 ae_rxintr(struct ae_softc *sc) 1003 { 1004 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1005 struct ae_rxsoft *rxs; 1006 struct mbuf *m; 1007 uint32_t rxstat; 1008 int i, len; 1009 1010 for (i = sc->sc_rxptr;; i = AE_NEXTRX(i)) { 1011 rxs = &sc->sc_rxsoft[i]; 1012 1013 AE_CDRXSYNC(sc, i, 1014 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 1015 1016 rxstat = sc->sc_rxdescs[i].ad_status; 1017 1018 if (rxstat & ADSTAT_OWN) { 1019 /* 1020 * We have processed all of the receive buffers. 1021 */ 1022 break; 1023 } 1024 1025 /* 1026 * If any collisions were seen on the wire, count one. 1027 */ 1028 if (rxstat & ADSTAT_Rx_CS) 1029 if_statinc(ifp, if_collisions); 1030 1031 /* 1032 * If an error occurred, update stats, clear the status 1033 * word, and leave the packet buffer in place. It will 1034 * simply be reused the next time the ring comes around. 1035 * If 802.1Q VLAN MTU is enabled, ignore the Frame Too Long 1036 * error. 1037 */ 1038 if (rxstat & ADSTAT_ES && 1039 ((sc->sc_ethercom.ec_capenable & ETHERCAP_VLAN_MTU) == 0 || 1040 (rxstat & (ADSTAT_Rx_DE | ADSTAT_Rx_RF | 1041 ADSTAT_Rx_DB | ADSTAT_Rx_CE)) != 0)) { 1042 #define PRINTERR(bit, str) \ 1043 if (rxstat & (bit)) \ 1044 printf("%s: receive error: %s\n", \ 1045 device_xname(sc->sc_dev), str) 1046 if_statinc(ifp, if_ierrors); 1047 PRINTERR(ADSTAT_Rx_DE, "descriptor error"); 1048 PRINTERR(ADSTAT_Rx_RF, "runt frame"); 1049 PRINTERR(ADSTAT_Rx_TL, "frame too long"); 1050 PRINTERR(ADSTAT_Rx_RE, "MII error"); 1051 PRINTERR(ADSTAT_Rx_DB, "dribbling bit"); 1052 PRINTERR(ADSTAT_Rx_CE, "CRC error"); 1053 #undef PRINTERR 1054 AE_INIT_RXDESC(sc, i); 1055 continue; 1056 } 1057 1058 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 1059 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_POSTREAD); 1060 1061 /* 1062 * No errors; receive the packet. Note the chip 1063 * includes the CRC with every packet. 1064 */ 1065 len = ADSTAT_Rx_LENGTH(rxstat) - ETHER_CRC_LEN; 1066 1067 /* 1068 * XXX: the Atheros part can align on half words. what 1069 * is the performance implication of this? Probably 1070 * minimal, and we should use it... 1071 */ 1072 #ifdef __NO_STRICT_ALIGNMENT 1073 /* 1074 * Allocate a new mbuf cluster. If that fails, we are 1075 * out of memory, and must drop the packet and recycle 1076 * the buffer that's already attached to this descriptor. 1077 */ 1078 m = rxs->rxs_mbuf; 1079 if (ae_add_rxbuf(sc, i) != 0) { 1080 if_statinc(ifp, if_ierrors); 1081 AE_INIT_RXDESC(sc, i); 1082 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 1083 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); 1084 continue; 1085 } 1086 #else 1087 /* 1088 * The chip's receive buffers must be 4-byte aligned. 1089 * But this means that the data after the Ethernet header 1090 * is misaligned. We must allocate a new buffer and 1091 * copy the data, shifted forward 2 bytes. 1092 */ 1093 MGETHDR(m, M_DONTWAIT, MT_DATA); 1094 if (m == NULL) { 1095 dropit: 1096 if_statinc(ifp, if_ierrors); 1097 AE_INIT_RXDESC(sc, i); 1098 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 1099 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); 1100 continue; 1101 } 1102 MCLAIM(m, &sc->sc_ethercom.ec_rx_mowner); 1103 if (len > (MHLEN - 2)) { 1104 MCLGET(m, M_DONTWAIT); 1105 if ((m->m_flags & M_EXT) == 0) { 1106 m_freem(m); 1107 goto dropit; 1108 } 1109 } 1110 m->m_data += 2; 1111 1112 /* 1113 * Note that we use clusters for incoming frames, so the 1114 * buffer is virtually contiguous. 1115 */ 1116 memcpy(mtod(m, void *), mtod(rxs->rxs_mbuf, void *), len); 1117 1118 /* Allow the receive descriptor to continue using its mbuf. */ 1119 AE_INIT_RXDESC(sc, i); 1120 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 1121 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); 1122 #endif /* __NO_STRICT_ALIGNMENT */ 1123 1124 m_set_rcvif(m, ifp); 1125 m->m_pkthdr.len = m->m_len = len; 1126 1127 /* Pass it on. */ 1128 if_percpuq_enqueue(ifp->if_percpuq, m); 1129 } 1130 1131 /* Update the receive pointer. */ 1132 sc->sc_rxptr = i; 1133 } 1134 1135 /* 1136 * ae_txintr: 1137 * 1138 * Helper; handle transmit interrupts. 1139 */ 1140 static void 1141 ae_txintr(struct ae_softc *sc) 1142 { 1143 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1144 struct ae_txsoft *txs; 1145 uint32_t txstat; 1146 1147 DPRINTF(sc, ("%s: ae_txintr: sc_flags 0x%08x\n", 1148 device_xname(sc->sc_dev), sc->sc_flags)); 1149 1150 /* 1151 * Go through our Tx list and free mbufs for those 1152 * frames that have been transmitted. 1153 */ 1154 while ((txs = SIMPLEQ_FIRST(&sc->sc_txdirtyq)) != NULL) { 1155 AE_CDTXSYNC(sc, txs->txs_lastdesc, 1156 txs->txs_ndescs, 1157 BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE); 1158 1159 #ifdef AE_DEBUG 1160 if (ifp->if_flags & IFF_DEBUG) { 1161 int i; 1162 printf(" txsoft %p transmit chain:\n", txs); 1163 for (i = txs->txs_firstdesc;; i = AE_NEXTTX(i)) { 1164 printf(" descriptor %d:\n", i); 1165 printf(" ad_status: 0x%08x\n", 1166 sc->sc_txdescs[i].ad_status); 1167 printf(" ad_ctl: 0x%08x\n", 1168 sc->sc_txdescs[i].ad_ctl); 1169 printf(" ad_bufaddr1: 0x%08x\n", 1170 sc->sc_txdescs[i].ad_bufaddr1); 1171 printf(" ad_bufaddr2: 0x%08x\n", 1172 sc->sc_txdescs[i].ad_bufaddr2); 1173 if (i == txs->txs_lastdesc) 1174 break; 1175 } 1176 } 1177 #endif 1178 1179 txstat = sc->sc_txdescs[txs->txs_lastdesc].ad_status; 1180 if (txstat & ADSTAT_OWN) 1181 break; 1182 1183 SIMPLEQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q); 1184 1185 sc->sc_txfree += txs->txs_ndescs; 1186 1187 bus_dmamap_sync(sc->sc_dmat, txs->txs_dmamap, 1188 0, txs->txs_dmamap->dm_mapsize, 1189 BUS_DMASYNC_POSTWRITE); 1190 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 1191 m_freem(txs->txs_mbuf); 1192 txs->txs_mbuf = NULL; 1193 1194 SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q); 1195 1196 /* 1197 * Check for errors and collisions. 1198 */ 1199 #ifdef AE_STATS 1200 if (txstat & ADSTAT_Tx_UF) 1201 sc->sc_stats.ts_tx_uf++; 1202 if (txstat & ADSTAT_Tx_TO) 1203 sc->sc_stats.ts_tx_to++; 1204 if (txstat & ADSTAT_Tx_EC) 1205 sc->sc_stats.ts_tx_ec++; 1206 if (txstat & ADSTAT_Tx_LC) 1207 sc->sc_stats.ts_tx_lc++; 1208 #endif 1209 1210 net_stat_ref_t nsr = IF_STAT_GETREF(ifp); 1211 if (txstat & (ADSTAT_Tx_UF | ADSTAT_Tx_TO)) 1212 if_statinc_ref(ifp, nsr, if_oerrors); 1213 1214 if (txstat & ADSTAT_Tx_EC) 1215 if_statadd_ref(ifp, nsr, if_collisions, 16); 1216 else if (ADSTAT_Tx_COLLISIONS(txstat)) 1217 if_statadd_ref(ifp, nsr, if_collisions, 1218 ADSTAT_Tx_COLLISIONS(txstat)); 1219 if (txstat & ADSTAT_Tx_LC) 1220 if_statinc_ref(ifp, nsr, if_collisions); 1221 1222 if_statinc_ref(ifp, nsr, if_opackets); 1223 IF_STAT_PUTREF(ifp); 1224 } 1225 1226 /* 1227 * If there are no more pending transmissions, cancel the watchdog 1228 * timer. 1229 */ 1230 if (txs == NULL) 1231 ifp->if_timer = 0; 1232 } 1233 1234 #ifdef AE_STATS 1235 void 1236 ae_print_stats(struct ae_softc *sc) 1237 { 1238 1239 printf("%s: tx_uf %lu, tx_to %lu, tx_ec %lu, tx_lc %lu\n", 1240 device_xname(sc->sc_dev), 1241 sc->sc_stats.ts_tx_uf, sc->sc_stats.ts_tx_to, 1242 sc->sc_stats.ts_tx_ec, sc->sc_stats.ts_tx_lc); 1243 } 1244 #endif 1245 1246 /* 1247 * ae_reset: 1248 * 1249 * Perform a soft reset on the chip. 1250 */ 1251 void 1252 ae_reset(struct ae_softc *sc) 1253 { 1254 int i; 1255 1256 AE_WRITE(sc, CSR_BUSMODE, BUSMODE_SWR); 1257 AE_BARRIER(sc); 1258 1259 /* 1260 * The chip doesn't take itself out of reset automatically. 1261 * We need to do so after 2us. 1262 */ 1263 delay(10); 1264 AE_WRITE(sc, CSR_BUSMODE, 0); 1265 AE_BARRIER(sc); 1266 1267 for (i = 0; i < 1000; i++) { 1268 /* 1269 * Wait a bit for the reset to complete before peeking 1270 * at the chip again. 1271 */ 1272 delay(10); 1273 if (AE_ISSET(sc, CSR_BUSMODE, BUSMODE_SWR) == 0) 1274 break; 1275 } 1276 1277 if (AE_ISSET(sc, CSR_BUSMODE, BUSMODE_SWR)) 1278 printf("%s: reset failed to complete\n", device_xname(sc->sc_dev)); 1279 1280 delay(1000); 1281 } 1282 1283 /* 1284 * ae_init: [ ifnet interface function ] 1285 * 1286 * Initialize the interface. Must be called at splnet(). 1287 */ 1288 static int 1289 ae_init(struct ifnet *ifp) 1290 { 1291 struct ae_softc *sc = ifp->if_softc; 1292 struct ae_txsoft *txs; 1293 struct ae_rxsoft *rxs; 1294 const uint8_t *enaddr; 1295 int i, error = 0; 1296 1297 if ((error = ae_enable(sc)) != 0) 1298 goto out; 1299 1300 /* 1301 * Cancel any pending I/O. 1302 */ 1303 ae_stop(ifp, 0); 1304 1305 /* 1306 * Reset the chip to a known state. 1307 */ 1308 ae_reset(sc); 1309 1310 /* 1311 * Initialize the BUSMODE register. 1312 */ 1313 AE_WRITE(sc, CSR_BUSMODE, 1314 /* XXX: not sure if this is a good thing or not... */ 1315 //BUSMODE_ALIGN_16B | 1316 BUSMODE_BAR | BUSMODE_BLE | BUSMODE_PBL_4LW); 1317 AE_BARRIER(sc); 1318 1319 /* 1320 * Initialize the transmit descriptor ring. 1321 */ 1322 memset(sc->sc_txdescs, 0, sizeof(sc->sc_txdescs)); 1323 for (i = 0; i < AE_NTXDESC; i++) { 1324 sc->sc_txdescs[i].ad_ctl = 0; 1325 sc->sc_txdescs[i].ad_bufaddr2 = 1326 AE_CDTXADDR(sc, AE_NEXTTX(i)); 1327 } 1328 sc->sc_txdescs[AE_NTXDESC - 1].ad_ctl |= ADCTL_ER; 1329 AE_CDTXSYNC(sc, 0, AE_NTXDESC, 1330 BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE); 1331 sc->sc_txfree = AE_NTXDESC; 1332 sc->sc_txnext = 0; 1333 1334 /* 1335 * Initialize the transmit job descriptors. 1336 */ 1337 SIMPLEQ_INIT(&sc->sc_txfreeq); 1338 SIMPLEQ_INIT(&sc->sc_txdirtyq); 1339 for (i = 0; i < AE_TXQUEUELEN; i++) { 1340 txs = &sc->sc_txsoft[i]; 1341 txs->txs_mbuf = NULL; 1342 SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q); 1343 } 1344 1345 /* 1346 * Initialize the receive descriptor and receive job 1347 * descriptor rings. 1348 */ 1349 for (i = 0; i < AE_NRXDESC; i++) { 1350 rxs = &sc->sc_rxsoft[i]; 1351 if (rxs->rxs_mbuf == NULL) { 1352 if ((error = ae_add_rxbuf(sc, i)) != 0) { 1353 printf("%s: unable to allocate or map rx " 1354 "buffer %d, error = %d\n", 1355 device_xname(sc->sc_dev), i, error); 1356 /* 1357 * XXX Should attempt to run with fewer receive 1358 * XXX buffers instead of just failing. 1359 */ 1360 ae_rxdrain(sc); 1361 goto out; 1362 } 1363 } else 1364 AE_INIT_RXDESC(sc, i); 1365 } 1366 sc->sc_rxptr = 0; 1367 1368 /* 1369 * Initialize the interrupt mask and enable interrupts. 1370 */ 1371 /* normal interrupts */ 1372 sc->sc_inten = STATUS_TI | STATUS_TU | STATUS_RI | STATUS_NIS; 1373 1374 /* abnormal interrupts */ 1375 sc->sc_inten |= STATUS_TPS | STATUS_TJT | STATUS_UNF | 1376 STATUS_RU | STATUS_RPS | STATUS_SE | STATUS_AIS; 1377 1378 sc->sc_rxint_mask = STATUS_RI | STATUS_RU; 1379 sc->sc_txint_mask = STATUS_TI | STATUS_UNF | STATUS_TJT; 1380 1381 sc->sc_rxint_mask &= sc->sc_inten; 1382 sc->sc_txint_mask &= sc->sc_inten; 1383 1384 AE_WRITE(sc, CSR_INTEN, sc->sc_inten); 1385 AE_WRITE(sc, CSR_STATUS, 0xffffffff); 1386 1387 /* 1388 * Give the transmit and receive rings to the chip. 1389 */ 1390 AE_WRITE(sc, CSR_TXLIST, AE_CDTXADDR(sc, sc->sc_txnext)); 1391 AE_WRITE(sc, CSR_RXLIST, AE_CDRXADDR(sc, sc->sc_rxptr)); 1392 AE_BARRIER(sc); 1393 1394 /* 1395 * Set the station address. 1396 */ 1397 enaddr = CLLADDR(ifp->if_sadl); 1398 AE_WRITE(sc, CSR_MACHI, enaddr[5] << 16 | enaddr[4]); 1399 AE_WRITE(sc, CSR_MACLO, enaddr[3] << 24 | enaddr[2] << 16 | 1400 enaddr[1] << 8 | enaddr[0]); 1401 AE_BARRIER(sc); 1402 1403 /* 1404 * Set the receive filter. This will start the transmit and 1405 * receive processes. 1406 */ 1407 ae_filter_setup(sc); 1408 1409 /* 1410 * Set the current media. 1411 */ 1412 if ((error = ether_mediachange(ifp)) != 0) 1413 goto out; 1414 1415 /* 1416 * Start the mac. 1417 */ 1418 AE_SET(sc, CSR_MACCTL, MACCTL_RE | MACCTL_TE); 1419 AE_BARRIER(sc); 1420 1421 /* 1422 * Write out the opmode. 1423 */ 1424 AE_WRITE(sc, CSR_OPMODE, OPMODE_SR | OPMODE_ST | 1425 ae_txthresh[sc->sc_txthresh].txth_opmode); 1426 /* 1427 * Start the receive process. 1428 */ 1429 AE_WRITE(sc, CSR_RXPOLL, RXPOLL_RPD); 1430 AE_BARRIER(sc); 1431 1432 if (sc->sc_tick != NULL) { 1433 /* Start the one second clock. */ 1434 callout_reset(&sc->sc_tick_callout, hz >> 3, sc->sc_tick, sc); 1435 } 1436 1437 /* 1438 * Note that the interface is now running. 1439 */ 1440 ifp->if_flags |= IFF_RUNNING; 1441 sc->sc_if_flags = ifp->if_flags; 1442 1443 out: 1444 if (error) { 1445 ifp->if_flags &= ~IFF_RUNNING; 1446 ifp->if_timer = 0; 1447 printf("%s: interface not running\n", device_xname(sc->sc_dev)); 1448 } 1449 return (error); 1450 } 1451 1452 /* 1453 * ae_enable: 1454 * 1455 * Enable the chip. 1456 */ 1457 static int 1458 ae_enable(struct ae_softc *sc) 1459 { 1460 1461 if (AE_IS_ENABLED(sc) == 0) { 1462 sc->sc_ih = arbus_intr_establish(sc->sc_cirq, sc->sc_mirq, 1463 ae_intr, sc); 1464 if (sc->sc_ih == NULL) { 1465 printf("%s: unable to establish interrupt\n", 1466 device_xname(sc->sc_dev)); 1467 return (EIO); 1468 } 1469 sc->sc_flags |= AE_ENABLED; 1470 } 1471 return (0); 1472 } 1473 1474 /* 1475 * ae_disable: 1476 * 1477 * Disable the chip. 1478 */ 1479 static void 1480 ae_disable(struct ae_softc *sc) 1481 { 1482 1483 if (AE_IS_ENABLED(sc)) { 1484 arbus_intr_disestablish(sc->sc_ih); 1485 sc->sc_flags &= ~AE_ENABLED; 1486 } 1487 } 1488 1489 /* 1490 * ae_power: 1491 * 1492 * Power management (suspend/resume) hook. 1493 */ 1494 static void 1495 ae_power(int why, void *arg) 1496 { 1497 struct ae_softc *sc = arg; 1498 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1499 int s; 1500 1501 printf("power called: %d, %x\n", why, (uint32_t)arg); 1502 s = splnet(); 1503 switch (why) { 1504 case PWR_STANDBY: 1505 /* do nothing! */ 1506 break; 1507 case PWR_SUSPEND: 1508 ae_stop(ifp, 0); 1509 ae_disable(sc); 1510 break; 1511 case PWR_RESUME: 1512 if (ifp->if_flags & IFF_UP) { 1513 ae_enable(sc); 1514 ae_init(ifp); 1515 } 1516 break; 1517 case PWR_SOFTSUSPEND: 1518 case PWR_SOFTSTANDBY: 1519 case PWR_SOFTRESUME: 1520 break; 1521 } 1522 splx(s); 1523 } 1524 1525 /* 1526 * ae_rxdrain: 1527 * 1528 * Drain the receive queue. 1529 */ 1530 static void 1531 ae_rxdrain(struct ae_softc *sc) 1532 { 1533 struct ae_rxsoft *rxs; 1534 int i; 1535 1536 for (i = 0; i < AE_NRXDESC; i++) { 1537 rxs = &sc->sc_rxsoft[i]; 1538 if (rxs->rxs_mbuf != NULL) { 1539 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); 1540 m_freem(rxs->rxs_mbuf); 1541 rxs->rxs_mbuf = NULL; 1542 } 1543 } 1544 } 1545 1546 /* 1547 * ae_stop: [ ifnet interface function ] 1548 * 1549 * Stop transmission on the interface. 1550 */ 1551 static void 1552 ae_stop(struct ifnet *ifp, int disable) 1553 { 1554 struct ae_softc *sc = ifp->if_softc; 1555 struct ae_txsoft *txs; 1556 1557 if (sc->sc_tick != NULL) { 1558 /* Stop the one second clock. */ 1559 callout_stop(&sc->sc_tick_callout); 1560 } 1561 1562 /* Down the MII. */ 1563 mii_down(&sc->sc_mii); 1564 1565 /* Disable interrupts. */ 1566 AE_WRITE(sc, CSR_INTEN, 0); 1567 1568 /* Stop the transmit and receive processes. */ 1569 AE_WRITE(sc, CSR_OPMODE, 0); 1570 AE_WRITE(sc, CSR_RXLIST, 0); 1571 AE_WRITE(sc, CSR_TXLIST, 0); 1572 AE_CLR(sc, CSR_MACCTL, MACCTL_TE | MACCTL_RE); 1573 AE_BARRIER(sc); 1574 1575 /* 1576 * Release any queued transmit buffers. 1577 */ 1578 while ((txs = SIMPLEQ_FIRST(&sc->sc_txdirtyq)) != NULL) { 1579 SIMPLEQ_REMOVE_HEAD(&sc->sc_txdirtyq, txs_q); 1580 if (txs->txs_mbuf != NULL) { 1581 bus_dmamap_unload(sc->sc_dmat, txs->txs_dmamap); 1582 m_freem(txs->txs_mbuf); 1583 txs->txs_mbuf = NULL; 1584 } 1585 SIMPLEQ_INSERT_TAIL(&sc->sc_txfreeq, txs, txs_q); 1586 } 1587 1588 /* 1589 * Mark the interface down and cancel the watchdog timer. 1590 */ 1591 ifp->if_flags &= ~IFF_RUNNING; 1592 sc->sc_if_flags = ifp->if_flags; 1593 ifp->if_timer = 0; 1594 1595 if (disable) { 1596 ae_rxdrain(sc); 1597 ae_disable(sc); 1598 } 1599 1600 /* 1601 * Reset the chip (needed on some flavors to actually disable it). 1602 */ 1603 ae_reset(sc); 1604 } 1605 1606 /* 1607 * ae_add_rxbuf: 1608 * 1609 * Add a receive buffer to the indicated descriptor. 1610 */ 1611 static int 1612 ae_add_rxbuf(struct ae_softc *sc, int idx) 1613 { 1614 struct ae_rxsoft *rxs = &sc->sc_rxsoft[idx]; 1615 struct mbuf *m; 1616 int error; 1617 1618 MGETHDR(m, M_DONTWAIT, MT_DATA); 1619 if (m == NULL) 1620 return (ENOBUFS); 1621 1622 MCLAIM(m, &sc->sc_ethercom.ec_rx_mowner); 1623 MCLGET(m, M_DONTWAIT); 1624 if ((m->m_flags & M_EXT) == 0) { 1625 m_freem(m); 1626 return (ENOBUFS); 1627 } 1628 1629 if (rxs->rxs_mbuf != NULL) 1630 bus_dmamap_unload(sc->sc_dmat, rxs->rxs_dmamap); 1631 1632 rxs->rxs_mbuf = m; 1633 1634 error = bus_dmamap_load(sc->sc_dmat, rxs->rxs_dmamap, 1635 m->m_ext.ext_buf, m->m_ext.ext_size, NULL, 1636 BUS_DMA_READ | BUS_DMA_NOWAIT); 1637 if (error) { 1638 printf("%s: can't load rx DMA map %d, error = %d\n", 1639 device_xname(sc->sc_dev), idx, error); 1640 panic("ae_add_rxbuf"); /* XXX */ 1641 } 1642 1643 bus_dmamap_sync(sc->sc_dmat, rxs->rxs_dmamap, 0, 1644 rxs->rxs_dmamap->dm_mapsize, BUS_DMASYNC_PREREAD); 1645 1646 AE_INIT_RXDESC(sc, idx); 1647 1648 return (0); 1649 } 1650 1651 /* 1652 * ae_filter_setup: 1653 * 1654 * Set the chip's receive filter. 1655 */ 1656 static void 1657 ae_filter_setup(struct ae_softc *sc) 1658 { 1659 struct ethercom *ec = &sc->sc_ethercom; 1660 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1661 struct ether_multi *enm; 1662 struct ether_multistep step; 1663 uint32_t hash, mchash[2]; 1664 uint32_t macctl = 0; 1665 1666 /* 1667 * If the chip is running, we need to reset the interface, 1668 * and will revisit here (with IFF_RUNNING) clear. The 1669 * chip seems to really not like to have its multicast 1670 * filter programmed without a reset. 1671 */ 1672 if (ifp->if_flags & IFF_RUNNING) { 1673 (void) ae_init(ifp); 1674 return; 1675 } 1676 1677 DPRINTF(sc, ("%s: ae_filter_setup: sc_flags 0x%08x\n", 1678 device_xname(sc->sc_dev), sc->sc_flags)); 1679 1680 macctl = AE_READ(sc, CSR_MACCTL); 1681 macctl &= ~(MACCTL_PR | MACCTL_PM); 1682 macctl |= MACCTL_HASH; 1683 macctl |= MACCTL_HBD; 1684 macctl |= MACCTL_PR; 1685 1686 if (ifp->if_flags & IFF_PROMISC) { 1687 macctl |= MACCTL_PR; 1688 goto allmulti; 1689 } 1690 1691 mchash[0] = mchash[1] = 0; 1692 1693 ETHER_LOCK(ec); 1694 ETHER_FIRST_MULTI(step, ec, enm); 1695 while (enm != NULL) { 1696 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, ETHER_ADDR_LEN)) { 1697 /* 1698 * We must listen to a range of multicast addresses. 1699 * For now, just accept all multicasts, rather than 1700 * trying to set only those filter bits needed to match 1701 * the range. (At this time, the only use of address 1702 * ranges is for IP multicast routing, for which the 1703 * range is big enough to require all bits set.) 1704 */ 1705 ETHER_UNLOCK(ec); 1706 goto allmulti; 1707 } 1708 1709 /* Verify whether we use big or little endian hashes */ 1710 hash = ether_crc32_be(enm->enm_addrlo, ETHER_ADDR_LEN) & 0x3f; 1711 mchash[hash >> 5] |= 1 << (hash & 0x1f); 1712 ETHER_NEXT_MULTI(step, enm); 1713 } 1714 ETHER_UNLOCK(ec); 1715 ifp->if_flags &= ~IFF_ALLMULTI; 1716 goto setit; 1717 1718 allmulti: 1719 ifp->if_flags |= IFF_ALLMULTI; 1720 mchash[0] = mchash[1] = 0xffffffff; 1721 macctl |= MACCTL_PM; 1722 1723 setit: 1724 AE_WRITE(sc, CSR_HTHI, mchash[0]); 1725 AE_WRITE(sc, CSR_HTHI, mchash[1]); 1726 1727 AE_WRITE(sc, CSR_MACCTL, macctl); 1728 AE_BARRIER(sc); 1729 1730 DPRINTF(sc, ("%s: ae_filter_setup: returning %x\n", 1731 device_xname(sc->sc_dev), macctl)); 1732 } 1733 1734 /* 1735 * ae_idle: 1736 * 1737 * Cause the transmit and/or receive processes to go idle. 1738 */ 1739 void 1740 ae_idle(struct ae_softc *sc, uint32_t bits) 1741 { 1742 static const char * const txstate_names[] = { 1743 "STOPPED", 1744 "RUNNING - FETCH", 1745 "RUNNING - WAIT", 1746 "RUNNING - READING", 1747 "-- RESERVED --", 1748 "RUNNING - SETUP", 1749 "SUSPENDED", 1750 "RUNNING - CLOSE", 1751 }; 1752 static const char * const rxstate_names[] = { 1753 "STOPPED", 1754 "RUNNING - FETCH", 1755 "RUNNING - CHECK", 1756 "RUNNING - WAIT", 1757 "SUSPENDED", 1758 "RUNNING - CLOSE", 1759 "RUNNING - FLUSH", 1760 "RUNNING - QUEUE", 1761 }; 1762 1763 uint32_t csr, ackmask = 0; 1764 int i; 1765 1766 if (bits & OPMODE_ST) 1767 ackmask |= STATUS_TPS; 1768 1769 if (bits & OPMODE_SR) 1770 ackmask |= STATUS_RPS; 1771 1772 AE_CLR(sc, CSR_OPMODE, bits); 1773 1774 for (i = 0; i < 1000; i++) { 1775 if (AE_ISSET(sc, CSR_STATUS, ackmask) == ackmask) 1776 break; 1777 delay(10); 1778 } 1779 1780 csr = AE_READ(sc, CSR_STATUS); 1781 if ((csr & ackmask) != ackmask) { 1782 if ((bits & OPMODE_ST) != 0 && (csr & STATUS_TPS) == 0 && 1783 (csr & STATUS_TS) != STATUS_TS_STOPPED) { 1784 printf("%s: transmit process failed to idle: " 1785 "state %s\n", device_xname(sc->sc_dev), 1786 txstate_names[(csr & STATUS_TS) >> 20]); 1787 } 1788 if ((bits & OPMODE_SR) != 0 && (csr & STATUS_RPS) == 0 && 1789 (csr & STATUS_RS) != STATUS_RS_STOPPED) { 1790 printf("%s: receive process failed to idle: " 1791 "state %s\n", device_xname(sc->sc_dev), 1792 rxstate_names[(csr & STATUS_RS) >> 17]); 1793 } 1794 } 1795 } 1796 1797 /***************************************************************************** 1798 * Support functions for MII-attached media. 1799 *****************************************************************************/ 1800 1801 /* 1802 * ae_mii_tick: 1803 * 1804 * One second timer, used to tick the MII. 1805 */ 1806 static void 1807 ae_mii_tick(void *arg) 1808 { 1809 struct ae_softc *sc = arg; 1810 int s; 1811 1812 if (!device_is_active(sc->sc_dev)) 1813 return; 1814 1815 s = splnet(); 1816 mii_tick(&sc->sc_mii); 1817 splx(s); 1818 1819 callout_reset(&sc->sc_tick_callout, hz, sc->sc_tick, sc); 1820 } 1821 1822 /* 1823 * ae_mii_statchg: [mii interface function] 1824 * 1825 * Callback from PHY when media changes. 1826 */ 1827 static void 1828 ae_mii_statchg(struct ifnet *ifp) 1829 { 1830 struct ae_softc *sc = ifp->if_softc; 1831 uint32_t macctl, flowc; 1832 1833 //opmode = AE_READ(sc, CSR_OPMODE); 1834 macctl = AE_READ(sc, CSR_MACCTL); 1835 1836 /* XXX: do we need to do this? */ 1837 /* Idle the transmit and receive processes. */ 1838 //ae_idle(sc, OPMODE_ST | OPMODE_SR); 1839 1840 if (sc->sc_mii.mii_media_active & IFM_FDX) { 1841 flowc = FLOWC_FCE; 1842 macctl &= ~MACCTL_DRO; 1843 macctl |= MACCTL_FDX; 1844 } else { 1845 flowc = 0; /* cannot do flow control in HDX */ 1846 macctl |= MACCTL_DRO; 1847 macctl &= ~MACCTL_FDX; 1848 } 1849 1850 AE_WRITE(sc, CSR_FLOWC, flowc); 1851 AE_WRITE(sc, CSR_MACCTL, macctl); 1852 1853 /* restore operational mode */ 1854 //AE_WRITE(sc, CSR_OPMODE, opmode); 1855 AE_BARRIER(sc); 1856 } 1857 1858 /* 1859 * ae_mii_readreg: 1860 * 1861 * Read a PHY register. 1862 */ 1863 static int 1864 ae_mii_readreg(device_t self, int phy, int reg, uint16_t *val) 1865 { 1866 struct ae_softc *sc = device_private(self); 1867 uint32_t addr; 1868 int i; 1869 1870 addr = (phy << MIIADDR_PHY_SHIFT) | (reg << MIIADDR_REG_SHIFT); 1871 AE_WRITE(sc, CSR_MIIADDR, addr); 1872 AE_BARRIER(sc); 1873 for (i = 0; i < 100000000; i++) { 1874 if ((AE_READ(sc, CSR_MIIADDR) & MIIADDR_BUSY) == 0) 1875 break; 1876 } 1877 1878 if (i >= 100000000) 1879 return ETIMEDOUT; 1880 1881 *val = AE_READ(sc, CSR_MIIDATA) & 0xffff; 1882 return 0; 1883 } 1884 1885 /* 1886 * ae_mii_writereg: 1887 * 1888 * Write a PHY register. 1889 */ 1890 static int 1891 ae_mii_writereg(device_t self, int phy, int reg, uint16_t val) 1892 { 1893 struct ae_softc *sc = device_private(self); 1894 uint32_t addr; 1895 int i; 1896 1897 /* write the data register */ 1898 AE_WRITE(sc, CSR_MIIDATA, val); 1899 1900 /* write the address to latch it in */ 1901 addr = (phy << MIIADDR_PHY_SHIFT) | (reg << MIIADDR_REG_SHIFT) | 1902 MIIADDR_WRITE; 1903 AE_WRITE(sc, CSR_MIIADDR, addr); 1904 AE_BARRIER(sc); 1905 1906 for (i = 0; i < 100000000; i++) { 1907 if ((AE_READ(sc, CSR_MIIADDR) & MIIADDR_BUSY) == 0) 1908 break; 1909 } 1910 1911 if (i >= 100000000) 1912 return ETIMEDOUT; 1913 1914 return 0; 1915 } 1916
Indexes created Fri Sep 26 20:09:58 GMT 2025