cpuregs.h revision 1.23.8.1
1 /* $NetBSD: cpuregs.h,v 1.23.8.1 1999/12/27 18:32:45 wrstuden Exp $ */ 2 3 /* 4 * Copyright (c) 1992, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * Ralph Campbell and Rick Macklem. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. All advertising materials mentioning features or use of this software 19 * must display the following acknowledgement: 20 * This product includes software developed by the University of 21 * California, Berkeley and its contributors. 22 * 4. Neither the name of the University nor the names of its contributors 23 * may be used to endorse or promote products derived from this software 24 * without specific prior written permission. 25 * 26 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 27 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 28 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 29 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 30 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 31 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 32 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 33 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 34 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 35 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 36 * SUCH DAMAGE. 37 * 38 * @(#)machConst.h 8.1 (Berkeley) 6/10/93 39 * 40 * machConst.h -- 41 * 42 * Machine dependent constants. 43 * 44 * Copyright (C) 1989 Digital Equipment Corporation. 45 * Permission to use, copy, modify, and distribute this software and 46 * its documentation for any purpose and without fee is hereby granted, 47 * provided that the above copyright notice appears in all copies. 48 * Digital Equipment Corporation makes no representations about the 49 * suitability of this software for any purpose. It is provided "as is" 50 * without express or implied warranty. 51 * 52 * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machConst.h, 53 * v 9.2 89/10/21 15:55:22 jhh Exp SPRITE (DECWRL) 54 * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAddrs.h, 55 * v 1.2 89/08/15 18:28:21 rab Exp SPRITE (DECWRL) 56 * from: Header: /sprite/src/kernel/vm/ds3100.md/RCS/vmPmaxConst.h, 57 * v 9.1 89/09/18 17:33:00 shirriff Exp SPRITE (DECWRL) 58 */ 59 60 #ifndef _MIPS_CPUREGS_H_ 61 #define _MIPS_CPUREGS_H_ 62 63 /* 64 * Address space. 65 * 32-bit mips CPUS partition their 32-bit address space into four segments: 66 * 67 * kuseg 0x00000000 - 0x7fffffff User virtual mem, mapped 68 * kseg0 0x80000000 - 0x9fffffff Physical memory, cached, unmapped 69 * kseg1 0xa0000000 - 0xbfffffff Physical memory, uncached, unmapped 70 * kseg2 0xc0000000 - 0xffffffff kernel-virtual, mapped 71 * 72 * mips1 physical memory is limited to 512Mbytes, which is 73 * doubly mapped in kseg0 (cached) and kseg1 (uncached.) 74 * Caching of mapped addresses is controlled by bits in the TLB entry. 75 */ 76 77 #define MIPS_KUSEG_START 0x0 78 #define MIPS_KSEG0_START 0x80000000 79 #define MIPS_KSEG1_START 0xa0000000 80 #define MIPS_KSEG2_START 0xc0000000 81 #define MIPS_MAX_MEM_ADDR 0xbe000000 82 #define MIPS_RESERVED_ADDR 0xbfc80000 83 84 #define MIPS_KSEG0_TO_PHYS(x) ((unsigned)(x) & 0x1fffffff) 85 #define MIPS_PHYS_TO_KSEG0(x) ((unsigned)(x) | MIPS_KSEG0_START) 86 #define MIPS_KSEG1_TO_PHYS(x) ((unsigned)(x) & 0x1fffffff) 87 #define MIPS_PHYS_TO_KSEG1(x) ((unsigned)(x) | MIPS_KSEG1_START) 88 89 /* Map virtual address to index in mips3 r4k virtually-indexed cache */ 90 #define MIPS3_VA_TO_CINDEX(x) \ 91 ((unsigned)(x) & 0xffffff | MIPS_KSEG0_START) 92 93 94 /* 95 * The bits in the cause register. 96 * 97 * Bits common to r3000 and r4000: 98 * 99 * MIPS_CR_BR_DELAY Exception happened in branch delay slot. 100 * MIPS_CR_COP_ERR Coprocessor error. 101 * MIPS_CR_IP Interrupt pending bits defined below. 102 * (same meaning as in CAUSE register). 103 * MIPS_CR_EXC_CODE The exception type (see exception codes below). 104 * 105 * Differences: 106 * r3k has 4 bits of execption type, r4k has 5 bits. 107 */ 108 #define MIPS_CR_BR_DELAY 0x80000000 109 #define MIPS_CR_COP_ERR 0x30000000 110 #define MIPS1_CR_EXC_CODE 0x0000003C /* four bits */ 111 #define MIPS3_CR_EXC_CODE 0x0000007C /* five bits */ 112 #define MIPS_CR_IP 0x0000FF00 113 #define MIPS_CR_EXC_CODE_SHIFT 2 114 115 /* 116 * The bits in the status register. All bits are active when set to 1. 117 * 118 * R3000 status register fields: 119 * MIPS_SR_CO_USABILITY Control the usability of the four coprocessors. 120 * MIPS_SR_BOOT_EXC_VEC Use alternate exception vectors. 121 * MIPS_SR_TLB_SHUTDOWN TLB disabled. 122 * 123 * MIPS_SR_INT_IE Master (current) interrupt enable bit. 124 * 125 * Differences: 126 * r3k has cache control is via frobbing SR register bits, whereas the 127 * r4k cache control is via explicit instructions. 128 * r3k has a 3-entry stack of kernel/user bits, whereas the 129 * r4k has kernel/supervisor/user. 130 */ 131 #define MIPS_SR_COP_USABILITY 0xf0000000 132 #define MIPS_SR_COP_0_BIT 0x10000000 133 #define MIPS_SR_COP_1_BIT 0x20000000 134 135 /* r4k and r3k differences, see below */ 136 137 #define MIPS_SR_BOOT_EXC_VEC 0x00400000 138 #define MIPS_SR_TLB_SHUTDOWN 0x00200000 139 140 /* r4k and r3k differences, see below */ 141 142 #define MIPS_SR_INT_IE 0x00000001 143 /*#define MIPS_SR_MBZ 0x0f8000c0*/ /* Never used, true for r3k */ 144 /*#define MIPS_SR_INT_MASK 0x0000ff00*/ 145 146 #define MIPS_SR_INT_ENAB MIPS_SR_INT_IE /* backwards compatibility */ 147 #define MIPS_SR_INT_ENA_CUR MIPS_SR_INT_IE /* backwards compatibility */ 148 149 150 151 /* 152 * The R2000/R3000-specific status register bit definitions. 153 * all bits are active when set to 1. 154 * 155 * MIPS_SR_PARITY_ERR Parity error. 156 * MIPS_SR_CACHE_MISS Most recent D-cache load resulted in a miss. 157 * MIPS_SR_PARITY_ZERO Zero replaces outgoing parity bits. 158 * MIPS_SR_SWAP_CACHES Swap I-cache and D-cache. 159 * MIPS_SR_ISOL_CACHES Isolate D-cache from main memory. 160 * Interrupt enable bits defined below. 161 * MIPS_SR_KU_OLD Old kernel/user mode bit. 1 => user mode. 162 * MIPS_SR_INT_ENA_OLD Old interrupt enable bit. 163 * MIPS_SR_KU_PREV Previous kernel/user mode bit. 1 => user mode. 164 * MIPS_SR_INT_ENA_PREV Previous interrupt enable bit. 165 * MIPS_SR_KU_CUR Current kernel/user mode bit. 1 => user mode. 166 */ 167 168 #define MIPS1_PARITY_ERR 0x00100000 169 #define MIPS1_CACHE_MISS 0x00080000 170 #define MIPS1_PARITY_ZERO 0x00040000 171 #define MIPS1_SWAP_CACHES 0x00020000 172 #define MIPS1_ISOL_CACHES 0x00010000 173 174 #define MIPS1_SR_KU_OLD 0x00000020 /* 2nd stacked KU/IE*/ 175 #define MIPS1_SR_INT_ENA_OLD 0x00000010 /* 2nd stacked KU/IE*/ 176 #define MIPS1_SR_KU_PREV 0x00000008 /* 1st stacked KU/IE*/ 177 #define MIPS1_SR_INT_ENA_PREV 0x00000004 /* 1st stacked KU/IE*/ 178 #define MIPS1_SR_KU_CUR 0x00000002 /* current KU */ 179 180 /* backwards compatibility */ 181 #define MIPS_SR_PARITY_ERR MIPS1_PARITY_ERR 182 #define MIPS_SR_CACHE_MISS MIPS1_CACHE_MISS 183 #define MIPS_SR_PARITY_ZERO MIPS1_PARITY_ZERO 184 #define MIPS_SR_SWAP_CACHES MIPS1_SWAP_CACHES 185 #define MIPS_SR_ISOL_CACHES MIPS1_ISOL_CACHES 186 187 #define MIPS_SR_KU_OLD MIPS1_SR_KU_OLD 188 #define MIPS_SR_INT_ENA_OLD MIPS1_SR_INT_ENA_OLD 189 #define MIPS_SR_KU_PREV MIPS1_SR_KU_PREV 190 #define MIPS_SR_KU_CUR MIPS1_SR_KU_CUR 191 #define MIPS_SR_INT_ENA_PREV MIPS1_SR_INT_ENA_PREV 192 193 /* 194 * R4000 status register bit definitons, 195 * where different from r2000/r3000. 196 */ 197 #define MIPS3_SR_XX 0x80000000 198 #define MIPS3_SR_RP 0x08000000 199 #define MIPS3_SR_FR_32 0x04000000 200 #define MIPS3_SR_RE 0x02000000 201 202 #define MIPS3_SR_SOFT_RESET 0x00100000 203 #define MIPS3_SR_DIAG_CH 0x00040000 204 #define MIPS3_SR_DIAG_CE 0x00020000 205 #define MIPS3_SR_DIAG_PE 0x00010000 206 #define MIPS3_SR_KX 0x00000080 207 #define MIPS3_SR_SX 0x00000040 208 #define MIPS3_SR_UX 0x00000020 209 #define MIPS3_SR_KSU_MASK 0x00000018 210 #define MIPS3_SR_KSU_USER 0x00000010 211 #define MIPS3_SR_KSU_SUPER 0x00000008 212 #define MIPS3_SR_KSU_KERNEL 0x00000000 213 #define MIPS3_SR_ERL 0x00000004 214 #define MIPS3_SR_EXL 0x00000002 215 216 #define MIPS_SR_SOFT_RESET MIPS3_SR_SOFT_RESET 217 #define MIPS_SR_DIAG_CH MIPS3_SR_DIAG_CH 218 #define MIPS_SR_DIAG_CE MIPS3_SR_DIAG_CE 219 #define MIPS_SR_DIAG_PE MIPS3_SR_DIAG_PE 220 #define MIPS_SR_KX MIPS3_SR_KX 221 #define MIPS_SR_SX MIPS3_SR_SX 222 #define MIPS_SR_UX MIPS3_SR_UX 223 224 #define MIPS_SR_KSU_MASK MIPS3_SR_KSU_MASK 225 #define MIPS_SR_KSU_USER MIPS3_SR_KSU_USER 226 #define MIPS_SR_KSU_SUPER MIPS3_SR_KSU_SUPER 227 #define MIPS_SR_KSU_KERNEL MIPS3_SR_KSU_KERNEL 228 #define MIPS_SR_ERL MIPS3_SR_ERL 229 #define MIPS_SR_EXL MIPS3_SR_EXL 230 231 232 /* 233 * The interrupt masks. 234 * If a bit in the mask is 1 then the interrupt is enabled (or pending). 235 */ 236 #define MIPS_INT_MASK 0xff00 237 #define MIPS_INT_MASK_5 0x8000 238 #define MIPS_INT_MASK_4 0x4000 239 #define MIPS_INT_MASK_3 0x2000 240 #define MIPS_INT_MASK_2 0x1000 241 #define MIPS_INT_MASK_1 0x0800 242 #define MIPS_INT_MASK_0 0x0400 243 #define MIPS_HARD_INT_MASK 0xfc00 244 #define MIPS_SOFT_INT_MASK_1 0x0200 245 #define MIPS_SOFT_INT_MASK_0 0x0100 246 247 /* 248 * mips3 CPUs have on-chip timer at INT_MASK_5. We don't support it yet. 249 */ 250 #define MIPS3_INT_MASK (MIPS_INT_MASK & ~MIPS_INT_MASK_5) 251 #define MIPS3_HARD_INT_MASK (MIPS_HARD_INT_MASK & ~MIPS_INT_MASK_5) 252 253 254 /* 255 * The bits in the context register. 256 */ 257 #define MIPS1_CNTXT_PTE_BASE 0xFFE00000 258 #define MIPS1_CNTXT_BAD_VPN 0x001FFFFC 259 260 #define MIPS3_CNTXT_PTE_BASE 0xFF800000 261 #define MIPS3_CNTXT_BAD_VPN2 0x007FFFF0 262 263 /* 264 * The bits in the MIPS3 config register. 265 * 266 * bit 0..5: R/W, Bit 6..31: R/O 267 */ 268 269 /* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */ 270 #define MIPS3_CONFIG_K0_MASK 0x00000007 271 272 /* 273 * R/W Update on Store Conditional 274 * 0: Store Conditional uses coherency algorithm specified by TLB 275 * 1: Store Conditional uses cacheable coherent update on write 276 */ 277 #define MIPS3_CONFIG_CU 0x00000008 278 279 #define MIPS3_CONFIG_DB 0x00000010 /* Primary D-cache line size */ 280 #define MIPS3_CONFIG_IB 0x00000020 /* Primary I-cache line size */ 281 #define MIPS3_CONFIG_CACHE_L1_LSIZE(config, bit) \ 282 (((config) & (bit)) ? 32 : 16) 283 284 #define MIPS3_CONFIG_DC_MASK 0x000001c0 /* Primary D-cache size */ 285 #define MIPS3_CONFIG_DC_SHIFT 6 286 #define MIPS3_CONFIG_IC_MASK 0x00000e00 /* Primary I-cache size */ 287 #define MIPS3_CONFIG_IC_SHIFT 9 288 #ifdef MIPS3_4100 /* VR4100 core */ 289 #define MIPS3_CONFIG_CS 0x00001000 /* cache size mode indication*/ 290 #define MIPS3_CONFIG_CACHE_SIZE(config, mask, shift) \ 291 ((((config)&MIPS3_CONFIG_CS)?0x400:0x1000) << (((config) & (mask)) >> (shift))) 292 #else 293 #define MIPS3_CONFIG_CACHE_SIZE(config, mask, shift) \ 294 (0x1000 << (((config) & (mask)) >> (shift))) 295 #endif 296 297 /* Block ordering: 0: sequential, 1: sub-block */ 298 #define MIPS3_CONFIG_EB 0x00002000 299 300 /* ECC mode - 0: ECC mode, 1: parity mode */ 301 #define MIPS3_CONFIG_EM 0x00004000 302 303 /* BigEndianMem - 0: kernel and memory are little endian, 1: big endian */ 304 #define MIPS3_CONFIG_BE 0x00008000 305 306 /* Dirty Shared coherency state - 0: enabled, 1: disabled */ 307 #define MIPS3_CONFIG_SM 0x00010000 308 309 /* Secondary Cache - 0: present, 1: not present */ 310 #define MIPS3_CONFIG_SC 0x00020000 311 312 /* System Port width - 0: 64-bit, 1,2,3: reserved */ 313 #define MIPS3_CONFIG_EW_MASK 0x000c0000 314 #define MIPS3_CONFIG_EW_SHIFT 18 315 316 /* Secondary Cache port width - 0: 128-bit data path to S-cache, 1: reserved */ 317 #define MIPS3_CONFIG_SW 0x00100000 318 319 /* Split Secondary Cache Mode - 0: I/D mixed, 1: I/D separated by SCAddr(17) */ 320 #define MIPS3_CONFIG_SS 0x00200000 321 322 /* Secondary Cache line size */ 323 #define MIPS3_CONFIG_SB_MASK 0x00c00000 324 #define MIPS3_CONFIG_SB_SHIFT 22 325 #define MIPS3_CONFIG_CACHE_L2_LSIZE(config) \ 326 (0x10 << (((config) & MIPS3_CONFIG_SB_MASK) >> MIPS3_CONFIG_SB_SHIFT)) 327 328 /* write back data rate */ 329 #define MIPS3_CONFIG_EP_MASK 0x0f000000 330 #define MIPS3_CONFIG_EP_SHIFT 24 331 332 /* System clock ratio - this value is CPU dependent */ 333 #define MIPS3_CONFIG_EC_MASK 0x70000000 334 #define MIPS3_CONFIG_EC_SHIFT 28 335 336 /* Master-Checker Mode - 1: enabled */ 337 #define MIPS3_CONFIG_CM 0x80000000 338 339 /* 340 * Location of exception vectors. 341 * 342 * Common vectors: reset and UTLB miss. 343 */ 344 #define MIPS_RESET_EXC_VEC 0xBFC00000 345 #define MIPS_UTLB_MISS_EXC_VEC 0x80000000 346 347 /* 348 * R3000 general exception vector (everything else) 349 */ 350 #define MIPS1_GEN_EXC_VEC 0x80000080 351 352 /* 353 * R4000 MIPS-III exception vectors 354 */ 355 #define MIPS3_XTLB_MISS_EXC_VEC 0x80000080 356 #define MIPS3_CACHE_ERR_EXC_VEC 0x80000100 357 #define MIPS3_GEN_EXC_VEC 0x80000180 358 359 /* 360 * Coprocessor 0 registers: 361 * 362 * MIPS_COP_0_TLB_INDEX TLB index. 363 * MIPS_COP_0_TLB_RANDOM TLB random. 364 * MIPS_COP_0_TLB_LOW r3k TLB entry low. 365 * MIPS_COP_0_TLB_LO0 r4k TLB entry low. 366 * MIPS_COP_0_TLB_LO1 r4k TLB entry low, extended. 367 * MIPS_COP_0_TLB_CONTEXT TLB context. 368 * MIPS_COP_0_BAD_VADDR Bad virtual address. 369 * MIPS_COP_0_TLB_HI TLB entry high. 370 * MIPS_COP_0_STATUS Status register. 371 * MIPS_COP_0_CAUSE Exception cause register. 372 * MIPS_COP_0_EXC_PC Exception PC. 373 * MIPS_COP_0_PRID Processor revision identifier. 374 */ 375 #define MIPS_COP_0_TLB_INDEX $0 376 #define MIPS_COP_0_TLB_RANDOM $1 377 /* Name and meaning of TLB bits for $2 differ on r3k and r4k. */ 378 379 #define MIPS_COP_0_TLB_CONTEXT $4 380 /* $5 and $6 new with MIPS-III */ 381 #define MIPS_COP_0_BAD_VADDR $8 382 #define MIPS_COP_0_TLB_HI $10 383 #define MIPS_COP_0_STATUS_REG $12 384 #define MIPS_COP_0_CAUSE_REG $13 385 #define MIPS_COP_0_STATUS $12 386 #define MIPS_COP_0_CAUSE $13 387 #define MIPS_COP_0_EXC_PC $14 388 #define MIPS_COP_0_PRID $15 389 390 391 /* MIPS-I */ 392 #define MIPS_COP_0_TLB_LOW $2 393 394 /* MIPS-III */ 395 #define MIPS_COP_0_TLB_LO0 $2 396 #define MIPS_COP_0_TLB_LO1 $3 397 398 #define MIPS_COP_0_TLB_PG_MASK $5 399 #define MIPS_COP_0_TLB_WIRED $6 400 401 #define MIPS_COP_0_COUNT $9 402 #define MIPS_COP_0_COMPARE $11 403 404 #define MIPS_COP_0_CONFIG $16 405 #define MIPS_COP_0_LLADDR $17 406 #define MIPS_COP_0_WATCH_LO $18 407 #define MIPS_COP_0_WATCH_HI $19 408 #define MIPS_COP_0_TLB_XCONTEXT $20 409 #define MIPS_COP_0_ECC $26 410 #define MIPS_COP_0_CACHE_ERR $27 411 #define MIPS_COP_0_TAG_LO $28 412 #define MIPS_COP_0_TAG_HI $29 413 #define MIPS_COP_0_ERROR_PC $30 414 415 416 417 /* 418 * Values for the code field in a break instruction. 419 */ 420 #define MIPS_BREAK_INSTR 0x0000000d 421 #define MIPS_BREAK_VAL_MASK 0x03ff0000 422 #define MIPS_BREAK_VAL_SHIFT 16 423 #define MIPS_BREAK_KDB_VAL 512 424 #define MIPS_BREAK_SSTEP_VAL 513 425 #define MIPS_BREAK_BRKPT_VAL 514 426 #define MIPS_BREAK_SOVER_VAL 515 427 #define MIPS_BREAK_KDB (MIPS_BREAK_INSTR | \ 428 (MIPS_BREAK_KDB_VAL << MIPS_BREAK_VAL_SHIFT)) 429 #define MIPS_BREAK_SSTEP (MIPS_BREAK_INSTR | \ 430 (MIPS_BREAK_SSTEP_VAL << MIPS_BREAK_VAL_SHIFT)) 431 #define MIPS_BREAK_BRKPT (MIPS_BREAK_INSTR | \ 432 (MIPS_BREAK_BRKPT_VAL << MIPS_BREAK_VAL_SHIFT)) 433 #define MIPS_BREAK_SOVER (MIPS_BREAK_INSTR | \ 434 (MIPS_BREAK_SOVER_VAL << MIPS_BREAK_VAL_SHIFT)) 435 436 /* 437 * Mininum and maximum cache sizes. 438 */ 439 #define MIPS_MIN_CACHE_SIZE (16 * 1024) 440 #define MIPS_MAX_CACHE_SIZE (256 * 1024) 441 442 /* 443 * The floating point version and status registers. 444 */ 445 #define MIPS_FPU_ID $0 446 #define MIPS_FPU_CSR $31 447 448 /* 449 * The floating point coprocessor status register bits. 450 */ 451 #define MIPS_FPU_ROUNDING_BITS 0x00000003 452 #define MIPS_FPU_ROUND_RN 0x00000000 453 #define MIPS_FPU_ROUND_RZ 0x00000001 454 #define MIPS_FPU_ROUND_RP 0x00000002 455 #define MIPS_FPU_ROUND_RM 0x00000003 456 #define MIPS_FPU_STICKY_BITS 0x0000007c 457 #define MIPS_FPU_STICKY_INEXACT 0x00000004 458 #define MIPS_FPU_STICKY_UNDERFLOW 0x00000008 459 #define MIPS_FPU_STICKY_OVERFLOW 0x00000010 460 #define MIPS_FPU_STICKY_DIV0 0x00000020 461 #define MIPS_FPU_STICKY_INVALID 0x00000040 462 #define MIPS_FPU_ENABLE_BITS 0x00000f80 463 #define MIPS_FPU_ENABLE_INEXACT 0x00000080 464 #define MIPS_FPU_ENABLE_UNDERFLOW 0x00000100 465 #define MIPS_FPU_ENABLE_OVERFLOW 0x00000200 466 #define MIPS_FPU_ENABLE_DIV0 0x00000400 467 #define MIPS_FPU_ENABLE_INVALID 0x00000800 468 #define MIPS_FPU_EXCEPTION_BITS 0x0003f000 469 #define MIPS_FPU_EXCEPTION_INEXACT 0x00001000 470 #define MIPS_FPU_EXCEPTION_UNDERFLOW 0x00002000 471 #define MIPS_FPU_EXCEPTION_OVERFLOW 0x00004000 472 #define MIPS_FPU_EXCEPTION_DIV0 0x00008000 473 #define MIPS_FPU_EXCEPTION_INVALID 0x00010000 474 #define MIPS_FPU_EXCEPTION_UNIMPL 0x00020000 475 #define MIPS_FPU_COND_BIT 0x00800000 476 #define MIPS_FPU_FLUSH_BIT 0x01000000 /* r4k, MBZ on r3k */ 477 #define MIPS1_FPC_MBZ_BITS 0xff7c0000 478 #define MIPS3_FPC_MBZ_BITS 0xfe7c0000 479 480 481 /* 482 * Constants to determine if have a floating point instruction. 483 */ 484 #define MIPS_OPCODE_SHIFT 26 485 #define MIPS_OPCODE_C1 0x11 486 487 488 489 /* 490 * The low part of the TLB entry. 491 */ 492 #define MIPS1_TLB_PFN 0xfffff000 493 #define MIPS1_TLB_NON_CACHEABLE_BIT 0x00000800 494 #define MIPS1_TLB_DIRTY_BIT 0x00000400 495 #define MIPS1_TLB_VALID_BIT 0x00000200 496 #define MIPS1_TLB_GLOBAL_BIT 0x00000100 497 498 #define MIPS3_TLB_PFN 0x3fffffc0 499 #define MIPS3_TLB_ATTR_MASK 0x00000038 500 #define MIPS3_TLB_ATTR_SHIFT 3 501 #define MIPS3_TLB_DIRTY_BIT 0x00000004 502 #define MIPS3_TLB_VALID_BIT 0x00000002 503 #define MIPS3_TLB_GLOBAL_BIT 0x00000001 504 505 /* XXX XXX XXX */ 506 #define MIPS1_TLB_PHYS_PAGE_SHIFT 12 507 #define MIPS3_TLB_PHYS_PAGE_SHIFT 6 508 #define MIPS1_TLB_PF_NUM MIPS1_TLB_PFN 509 #define MIPS3_TLB_PF_NUM MIPS3_TLB_PFN 510 #define MIPS1_TLB_MOD_BIT MIPS1_TLB_DIRTY_BIT 511 #define MIPS3_TLB_MOD_BIT MIPS3_TLB_DIRTY_BIT 512 /* XXX XXX XXX */ 513 514 /* 515 * MIPS3_TLB_ATTR values - coherency algorithm: 516 * 0: cacheable, noncoherent, write-through, no write allocate 517 * 1: cacheable, noncoherent, write-through, write allocate 518 * 2: uncached 519 * 3: cacheable, noncoherent, write-back (noncoherent) 520 * 4: cacheable, coherent, write-back, exclusive (exclusive) 521 * 5: cacheable, coherent, write-back, exclusive on write (sharable) 522 * 6: cacheable, coherent, write-back, update on write (update) 523 * 7: uncached, accelerated (gather STORE operations) 524 */ 525 #define MIPS3_TLB_ATTR_WT 0 /* IDT */ 526 #define MIPS3_TLB_ATTR_WT_WRITEALLOCATE 1 /* IDT */ 527 #define MIPS3_TLB_ATTR_UNCACHED 2 /* R4000/R4400, IDT */ 528 #define MIPS3_TLB_ATTR_WB_NONCOHERENT 3 /* R4000/R4400, IDT */ 529 #define MIPS3_TLB_ATTR_WB_EXCLUSIVE 4 /* R4000/R4400 */ 530 #define MIPS3_TLB_ATTR_WB_SHARABLE 5 /* R4000/R4400 */ 531 #define MIPS3_TLB_ATTR_WB_UPDATE 6 /* R4000/R4400 */ 532 #define MIPS4_TLB_ATTR_UNCACHED_ACCELERATED 7 /* R10000 */ 533 534 535 /* 536 * The high part of the TLB entry. 537 */ 538 #define MIPS1_TLB_VPN 0xfffff000 539 #define MIPS1_TLB_PID 0x00000fc0 540 #define MIPS1_TLB_PID_SHIFT 6 541 542 #define MIPS3_TLB_VPN2 0xffffe000 543 #define MIPS3_TLB_ASID 0x000000ff 544 545 /* XXX XXX XXX */ 546 #define MIPS1_TLB_VIRT_PAGE_NUM MIPS1_TLB_VPN 547 #define MIPS3_TLB_VIRT_PAGE_NUM MIPS3_TLB_VPN2 548 #define MIPS3_TLB_PID MIPS3_TLB_ASID 549 #define MIPS_TLB_VIRT_PAGE_SHIFT 12 550 /* XXX XXX XXX */ 551 552 /* 553 * r3000: shift count to put the index in the right spot. 554 */ 555 #define MIPS1_TLB_INDEX_SHIFT 8 556 557 /* 558 * The number of TLB entries and the first one that write random hits. 559 */ 560 #define MIPS1_TLB_NUM_TLB_ENTRIES 64 561 #define MIPS1_TLB_FIRST_RAND_ENTRY 8 562 563 #define MIPS3_TLB_NUM_TLB_ENTRIES 48 564 #define MIPS_R4300_TLB_NUM_TLB_ENTRIES 32 565 #define MIPS3_TLB_WIRED_ENTRIES 8 /* XXX gross XXX */ 566 567 568 /* 569 * The number of process id entries. 570 */ 571 #define MIPS1_TLB_NUM_PIDS 64 572 #define MIPS3_TLB_NUM_ASIDS 256 573 574 /* 575 * Patch codes to hide CPU design differences between MIPS1 and MIPS3. 576 * 577 * XXX INT_MASK and HARD_INT_MASK are here only because we dont 578 * support the mips3 on-chip timer which is tied to INT_5. 579 */ 580 581 #if !defined(MIPS3) && defined(MIPS1) 582 #define MIPS_TLB_PID_SHIFT MIPS1_TLB_PID_SHIFT 583 #define MIPS_TLB_NUM_PIDS MIPS1_TLB_NUM_PIDS 584 #endif 585 586 #if defined(MIPS3) && !defined(MIPS1) 587 #define MIPS_TLB_PID_SHIFT 0 588 #define MIPS_TLB_NUM_PIDS MIPS3_TLB_NUM_ASIDS 589 #endif 590 591 592 #if defined(MIPS1) && defined(MIPS3) 593 #define MIPS_TLB_PID_SHIFT \ 594 ((CPUISMIPS3)? 0 : MIPS1_TLB_PID_SHIFT) 595 596 #define MIPS_TLB_NUM_PIDS \ 597 ((CPUISMIPS3)? MIPS3_TLB_NUM_ASIDS : MIPS1_TLB_NUM_PIDS) 598 599 #endif 600 601 /* 602 * CPU processor revision ID 603 */ 604 #define MIPS_R2000 0x01 /* MIPS R2000 CPU ISA I */ 605 #define MIPS_R3000 0x02 /* MIPS R3000 CPU ISA I */ 606 #define MIPS_R6000 0x03 /* MIPS R6000 CPU ISA II */ 607 #define MIPS_R4000 0x04 /* MIPS R4000/4400 CPU ISA III */ 608 #define MIPS_R3LSI 0x05 /* LSI Logic R3000 derivate ISA I */ 609 #define MIPS_R6000A 0x06 /* MIPS R6000A CPU ISA II */ 610 #define MIPS_R3IDT 0x07 /* IDT R3041 or RC36100 CPU ISA I */ 611 #define MIPS_R10000 0x09 /* MIPS R10000/T5 CPU ISA IV */ 612 #define MIPS_R4200 0x0a /* NEC VR4200 CPU ISA III */ 613 #define MIPS_R4300 0x0b /* NEC VR4300 CPU ISA III */ 614 #define MIPS_R4100 0x0c /* NEC VR4100 CPU ISA III */ 615 #define MIPS_R8000 0x10 /* MIPS R8000 Blackbird/TFP ISA IV */ 616 #define MIPS_R4600 0x20 /* QED R4600 Orion ISA III */ 617 #define MIPS_R4700 0x21 /* QED R4700 Orion ISA III */ 618 #define MIPS_R4650 0x22 /* !ID crash! QED R4650 CPU ISA III */ 619 #define MIPS_TX3900 0x22 /* !ID crash! Toshiba R3000 CPU ISA I */ 620 #define MIPS_R5000 0x23 /* MIPS R5000 CPU ISA IV */ 621 #define MIPS_RC32364 0x26 /* IDT RC32364 CPU ISA II */ 622 #define MIPS_RM5230 0x28 /* QED RM5230 CPU ISA IV */ 623 #define MIPS_RC64470 0x30 /* IDT RC64474/RC64475 CPU ISA III */ 624 #define MIPS_R3SONY 0x21 /* ? Sony R3000 based CPU ISA I */ 625 #define MIPS_R3NKK 0x23 /* ? NKK R3000 based CPU ISA I */ 626 #define MIPS_R5400 0x54 /* NEC VR5400 CPU ISA IV */ 627 628 /* 629 * FPU processor revision ID 630 */ 631 #define MIPS_SOFT 0x00 /* Software emulation ISA I */ 632 #define MIPS_R2360 0x01 /* MIPS R2360 FPC ISA I */ 633 #define MIPS_R2010 0x02 /* MIPS R2010 FPC ISA I */ 634 #define MIPS_R3010 0x03 /* MIPS R3010 FPC ISA I */ 635 #define MIPS_R6010 0x04 /* MIPS R6010 FPC ISA II */ 636 #define MIPS_R4010 0x05 /* MIPS R4010 FPC ISA II */ 637 #define MIPS_R31LSI 0x06 /* LSI Logic derivate ISA I */ 638 #define MIPS_R10010 0x09 /* MIPS R10000/T5 FPU ISA IV */ 639 #define MIPS_R4210 0x0a /* NEC VR4210 FPC ISA III */ 640 #define MIPS_R4300 0x0b /* NEC VR4300 FPC ISA III */ 641 #define MIPS_R8000 0x10 /* MIPS R8000 Blackbird/TFP ISA IV */ 642 #define MIPS_R4600 0x20 /* QED R4600 Orion FPU ISA III */ 643 #define MIPS_R5010 0x23 /* MIPS R5000 FPU ISA IV */ 644 #define MIPS_RC32364 0x26 /* IDT RC32364 FPU ISA II */ 645 #define MIPS_RM5230 0x28 /* QED RM5230 FPU ISA IV */ 646 #define MIPS_R3SONY 0x21 /* ? Sony R3000 based FPU ISA I */ 647 #define MIPS_R3TOSH 0x22 /* ? Toshiba R3000 based FPU ISA I */ 648 #define MIPS_R3NKK 0x23 /* ? NKK R3000 based FPU ISA I */ 649 650 #ifdef ENABLE_MIPS_TX3900 651 #include <mips/r3900regs.h> 652 #endif 653 654 #endif /* _MIPS_CPUREGS_H_ */ 655
Indexes created Thu Oct 30 16:09:53 GMT 2025