Home | History | Annotate | Line # | Download | only in include
cpuregs.h revision 1.61
      1 /*	$NetBSD: cpuregs.h,v 1.61 2003/06/10 06:42:06 simonb Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 1992, 1993
      5  *	The Regents of the University of California.  All rights reserved.
      6  *
      7  * This code is derived from software contributed to Berkeley by
      8  * Ralph Campbell and Rick Macklem.
      9  *
     10  * Redistribution and use in source and binary forms, with or without
     11  * modification, are permitted provided that the following conditions
     12  * are met:
     13  * 1. Redistributions of source code must retain the above copyright
     14  *    notice, this list of conditions and the following disclaimer.
     15  * 2. Redistributions in binary form must reproduce the above copyright
     16  *    notice, this list of conditions and the following disclaimer in the
     17  *    documentation and/or other materials provided with the distribution.
     18  * 3. All advertising materials mentioning features or use of this software
     19  *    must display the following acknowledgement:
     20  *	This product includes software developed by the University of
     21  *	California, Berkeley and its contributors.
     22  * 4. Neither the name of the University nor the names of its contributors
     23  *    may be used to endorse or promote products derived from this software
     24  *    without specific prior written permission.
     25  *
     26  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
     27  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
     28  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
     29  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
     30  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
     31  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
     32  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
     33  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
     34  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
     35  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
     36  * SUCH DAMAGE.
     37  *
     38  *	@(#)machConst.h 8.1 (Berkeley) 6/10/93
     39  *
     40  * machConst.h --
     41  *
     42  *	Machine dependent constants.
     43  *
     44  *	Copyright (C) 1989 Digital Equipment Corporation.
     45  *	Permission to use, copy, modify, and distribute this software and
     46  *	its documentation for any purpose and without fee is hereby granted,
     47  *	provided that the above copyright notice appears in all copies.
     48  *	Digital Equipment Corporation makes no representations about the
     49  *	suitability of this software for any purpose.  It is provided "as is"
     50  *	without express or implied warranty.
     51  *
     52  * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machConst.h,
     53  *	v 9.2 89/10/21 15:55:22 jhh Exp	 SPRITE (DECWRL)
     54  * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAddrs.h,
     55  *	v 1.2 89/08/15 18:28:21 rab Exp	 SPRITE (DECWRL)
     56  * from: Header: /sprite/src/kernel/vm/ds3100.md/RCS/vmPmaxConst.h,
     57  *	v 9.1 89/09/18 17:33:00 shirriff Exp  SPRITE (DECWRL)
     58  */
     59 
     60 #ifndef _MIPS_CPUREGS_H_
     61 #define	_MIPS_CPUREGS_H_
     62 
     63 #include <sys/cdefs.h>		/* For __CONCAT() */
     64 
     65 #if defined(_KERNEL_OPT)
     66 #include "opt_cputype.h"
     67 #endif
     68 
     69 /*
     70  * Address space.
     71  * 32-bit mips CPUS partition their 32-bit address space into four segments:
     72  *
     73  * kuseg   0x00000000 - 0x7fffffff  User virtual mem,  mapped
     74  * kseg0   0x80000000 - 0x9fffffff  Physical memory, cached, unmapped
     75  * kseg1   0xa0000000 - 0xbfffffff  Physical memory, uncached, unmapped
     76  * kseg2   0xc0000000 - 0xffffffff  kernel-virtual,  mapped
     77  *
     78  * mips1 physical memory is limited to 512Mbytes, which is
     79  * doubly mapped in kseg0 (cached) and kseg1 (uncached.)
     80  * Caching of mapped addresses is controlled by bits in the TLB entry.
     81  */
     82 
     83 #define	MIPS_KUSEG_START		0x0
     84 #define	MIPS_KSEG0_START		0x80000000
     85 #define	MIPS_KSEG1_START		0xa0000000
     86 #define	MIPS_KSEG2_START		0xc0000000
     87 #define	MIPS_MAX_MEM_ADDR		0xbe000000
     88 #define	MIPS_RESERVED_ADDR		0xbfc80000
     89 
     90 #define	MIPS_PHYS_MASK			0x1fffffff
     91 
     92 #define	MIPS_KSEG0_TO_PHYS(x)	((unsigned)(x) & MIPS_PHYS_MASK)
     93 #define	MIPS_PHYS_TO_KSEG0(x)	((unsigned)(x) | MIPS_KSEG0_START)
     94 #define	MIPS_KSEG1_TO_PHYS(x)	((unsigned)(x) & MIPS_PHYS_MASK)
     95 #define	MIPS_PHYS_TO_KSEG1(x)	((unsigned)(x) | MIPS_KSEG1_START)
     96 
     97 /* Map virtual address to index in mips3 r4k virtually-indexed cache */
     98 #define	MIPS3_VA_TO_CINDEX(x) \
     99 		((unsigned)(x) & 0xffffff | MIPS_KSEG0_START)
    100 
    101 #define	MIPS_PHYS_TO_XKPHYS(cca,x) \
    102 	((0x2ULL << 62) | ((unsigned long long)(cca) << 59) | (x))
    103 #define	MIPS_XKPHYS_TO_PHYS(x)	((x) & 0x0effffffffffffffULL)
    104 
    105 /* CPU dependent mtc0 hazard hook */
    106 #define	COP0_SYNC		/* nothing */
    107 #define	COP0_HAZARD_FPUENABLE	nop; nop; nop; nop;
    108 
    109 /*
    110  * The bits in the cause register.
    111  *
    112  * Bits common to r3000 and r4000:
    113  *
    114  *	MIPS_CR_BR_DELAY	Exception happened in branch delay slot.
    115  *	MIPS_CR_COP_ERR		Coprocessor error.
    116  *	MIPS_CR_IP		Interrupt pending bits defined below.
    117  *				(same meaning as in CAUSE register).
    118  *	MIPS_CR_EXC_CODE	The exception type (see exception codes below).
    119  *
    120  * Differences:
    121  *  r3k has 4 bits of execption type, r4k has 5 bits.
    122  */
    123 #define	MIPS_CR_BR_DELAY	0x80000000
    124 #define	MIPS_CR_COP_ERR		0x30000000
    125 #define	MIPS1_CR_EXC_CODE	0x0000003C	/* four bits */
    126 #define	MIPS3_CR_EXC_CODE	0x0000007C	/* five bits */
    127 #define	MIPS_CR_IP		0x0000FF00
    128 #define	MIPS_CR_EXC_CODE_SHIFT	2
    129 
    130 /*
    131  * The bits in the status register.  All bits are active when set to 1.
    132  *
    133  *	R3000 status register fields:
    134  *	MIPS_SR_COP_USABILITY	Control the usability of the four coprocessors.
    135  *	MIPS_SR_TS		TLB shutdown.
    136  *
    137  *	MIPS_SR_INT_IE		Master (current) interrupt enable bit.
    138  *
    139  * Differences:
    140  *	r3k has cache control is via frobbing SR register bits, whereas the
    141  *	r4k cache control is via explicit instructions.
    142  *	r3k has a 3-entry stack of kernel/user bits, whereas the
    143  *	r4k has kernel/supervisor/user.
    144  */
    145 #define	MIPS_SR_COP_USABILITY	0xf0000000
    146 #define	MIPS_SR_COP_0_BIT	0x10000000
    147 #define	MIPS_SR_COP_1_BIT	0x20000000
    148 
    149 	/* r4k and r3k differences, see below */
    150 
    151 #define	MIPS_SR_MX		0x01000000	/* MIPS64 */
    152 #define	MIPS_SR_PX		0x00800000	/* MIPS64 */
    153 #define	MIPS_SR_BEV		0x00400000	/* Use boot exception vector */
    154 #define	MIPS_SR_TS		0x00200000
    155 
    156 	/* r4k and r3k differences, see below */
    157 
    158 #define	MIPS_SR_INT_IE		0x00000001
    159 /*#define MIPS_SR_MBZ		0x0f8000c0*/	/* Never used, true for r3k */
    160 /*#define MIPS_SR_INT_MASK	0x0000ff00*/
    161 
    162 
    163 /*
    164  * The R2000/R3000-specific status register bit definitions.
    165  * all bits are active when set to 1.
    166  *
    167  *	MIPS_SR_PARITY_ERR	Parity error.
    168  *	MIPS_SR_CACHE_MISS	Most recent D-cache load resulted in a miss.
    169  *	MIPS_SR_PARITY_ZERO	Zero replaces outgoing parity bits.
    170  *	MIPS_SR_SWAP_CACHES	Swap I-cache and D-cache.
    171  *	MIPS_SR_ISOL_CACHES	Isolate D-cache from main memory.
    172  *				Interrupt enable bits defined below.
    173  *	MIPS_SR_KU_OLD		Old kernel/user mode bit. 1 => user mode.
    174  *	MIPS_SR_INT_ENA_OLD	Old interrupt enable bit.
    175  *	MIPS_SR_KU_PREV		Previous kernel/user mode bit. 1 => user mode.
    176  *	MIPS_SR_INT_ENA_PREV	Previous interrupt enable bit.
    177  *	MIPS_SR_KU_CUR		Current kernel/user mode bit. 1 => user mode.
    178  */
    179 
    180 #define	MIPS1_PARITY_ERR	0x00100000
    181 #define	MIPS1_CACHE_MISS	0x00080000
    182 #define	MIPS1_PARITY_ZERO	0x00040000
    183 #define	MIPS1_SWAP_CACHES	0x00020000
    184 #define	MIPS1_ISOL_CACHES	0x00010000
    185 
    186 #define	MIPS1_SR_KU_OLD		0x00000020	/* 2nd stacked KU/IE*/
    187 #define	MIPS1_SR_INT_ENA_OLD	0x00000010	/* 2nd stacked KU/IE*/
    188 #define	MIPS1_SR_KU_PREV	0x00000008	/* 1st stacked KU/IE*/
    189 #define	MIPS1_SR_INT_ENA_PREV	0x00000004	/* 1st stacked KU/IE*/
    190 #define	MIPS1_SR_KU_CUR		0x00000002	/* current KU */
    191 
    192 /* backwards compatibility */
    193 #define	MIPS_SR_PARITY_ERR	MIPS1_PARITY_ERR
    194 #define	MIPS_SR_CACHE_MISS	MIPS1_CACHE_MISS
    195 #define	MIPS_SR_PARITY_ZERO	MIPS1_PARITY_ZERO
    196 #define	MIPS_SR_SWAP_CACHES	MIPS1_SWAP_CACHES
    197 #define	MIPS_SR_ISOL_CACHES	MIPS1_ISOL_CACHES
    198 
    199 #define	MIPS_SR_KU_OLD		MIPS1_SR_KU_OLD
    200 #define	MIPS_SR_INT_ENA_OLD	MIPS1_SR_INT_ENA_OLD
    201 #define	MIPS_SR_KU_PREV		MIPS1_SR_KU_PREV
    202 #define	MIPS_SR_KU_CUR		MIPS1_SR_KU_CUR
    203 #define	MIPS_SR_INT_ENA_PREV	MIPS1_SR_INT_ENA_PREV
    204 
    205 /*
    206  * R4000 status register bit definitons,
    207  * where different from r2000/r3000.
    208  */
    209 #define	MIPS3_SR_XX		0x80000000
    210 #define	MIPS3_SR_RP		0x08000000
    211 #define	MIPS3_SR_FR		0x04000000
    212 #define	MIPS3_SR_RE		0x02000000
    213 
    214 #define	MIPS3_SR_DIAG_DL	0x01000000		/* QED 52xx */
    215 #define	MIPS3_SR_DIAG_IL	0x00800000		/* QED 52xx */
    216 #define	MIPS3_SR_SR		0x00100000
    217 #define	MIPS3_SR_EIE		0x00100000		/* TX79/R5900 */
    218 #define	MIPS3_SR_NMI		0x00080000		/* MIPS32/64 */
    219 #define	MIPS3_SR_DIAG_CH	0x00040000
    220 #define	MIPS3_SR_DIAG_CE	0x00020000
    221 #define	MIPS3_SR_DIAG_PE	0x00010000
    222 #define	MIPS3_SR_KX		0x00000080
    223 #define	MIPS3_SR_SX		0x00000040
    224 #define	MIPS3_SR_UX		0x00000020
    225 #define	MIPS3_SR_KSU_MASK	0x00000018
    226 #define	MIPS3_SR_KSU_USER	0x00000010
    227 #define	MIPS3_SR_KSU_SUPER	0x00000008
    228 #define	MIPS3_SR_KSU_KERNEL	0x00000000
    229 #define	MIPS3_SR_ERL		0x00000004
    230 #define	MIPS3_SR_EXL		0x00000002
    231 
    232 #ifdef MIPS3_5900
    233 #undef MIPS_SR_INT_IE
    234 #define	MIPS_SR_INT_IE		0x00010001		/* XXX */
    235 #endif
    236 
    237 #define	MIPS_SR_SOFT_RESET	MIPS3_SR_SOFT_RESET
    238 #define	MIPS_SR_DIAG_CH		MIPS3_SR_DIAG_CH
    239 #define	MIPS_SR_DIAG_CE		MIPS3_SR_DIAG_CE
    240 #define	MIPS_SR_DIAG_PE		MIPS3_SR_DIAG_PE
    241 #define	MIPS_SR_KX		MIPS3_SR_KX
    242 #define	MIPS_SR_SX		MIPS3_SR_SX
    243 #define	MIPS_SR_UX		MIPS3_SR_UX
    244 
    245 #define	MIPS_SR_KSU_MASK	MIPS3_SR_KSU_MASK
    246 #define	MIPS_SR_KSU_USER	MIPS3_SR_KSU_USER
    247 #define	MIPS_SR_KSU_SUPER	MIPS3_SR_KSU_SUPER
    248 #define	MIPS_SR_KSU_KERNEL	MIPS3_SR_KSU_KERNEL
    249 #define	MIPS_SR_ERL		MIPS3_SR_ERL
    250 #define	MIPS_SR_EXL		MIPS3_SR_EXL
    251 
    252 
    253 /*
    254  * The interrupt masks.
    255  * If a bit in the mask is 1 then the interrupt is enabled (or pending).
    256  */
    257 #define	MIPS_INT_MASK		0xff00
    258 #define	MIPS_INT_MASK_5		0x8000
    259 #define	MIPS_INT_MASK_4		0x4000
    260 #define	MIPS_INT_MASK_3		0x2000
    261 #define	MIPS_INT_MASK_2		0x1000
    262 #define	MIPS_INT_MASK_1		0x0800
    263 #define	MIPS_INT_MASK_0		0x0400
    264 #define	MIPS_HARD_INT_MASK	0xfc00
    265 #define	MIPS_SOFT_INT_MASK_1	0x0200
    266 #define	MIPS_SOFT_INT_MASK_0	0x0100
    267 
    268 /*
    269  * mips3 CPUs have on-chip timer at INT_MASK_5.  Each platform can
    270  * choose to enable this interrupt.
    271  */
    272 #if defined(MIPS3_ENABLE_CLOCK_INTR)
    273 #define	MIPS3_INT_MASK			MIPS_INT_MASK
    274 #define	MIPS3_HARD_INT_MASK		MIPS_HARD_INT_MASK
    275 #else
    276 #define	MIPS3_INT_MASK			(MIPS_INT_MASK &  ~MIPS_INT_MASK_5)
    277 #define	MIPS3_HARD_INT_MASK		(MIPS_HARD_INT_MASK & ~MIPS_INT_MASK_5)
    278 #endif
    279 
    280 /*
    281  * The bits in the context register.
    282  */
    283 #define	MIPS1_CNTXT_PTE_BASE	0xFFE00000
    284 #define	MIPS1_CNTXT_BAD_VPN	0x001FFFFC
    285 
    286 #define	MIPS3_CNTXT_PTE_BASE	0xFF800000
    287 #define	MIPS3_CNTXT_BAD_VPN2	0x007FFFF0
    288 
    289 /*
    290  * The bits in the MIPS3 config register.
    291  *
    292  *	bit 0..5: R/W, Bit 6..31: R/O
    293  */
    294 
    295 /* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */
    296 #define	MIPS3_CONFIG_K0_MASK	0x00000007
    297 
    298 /*
    299  * R/W Update on Store Conditional
    300  *	0: Store Conditional uses coherency algorithm specified by TLB
    301  *	1: Store Conditional uses cacheable coherent update on write
    302  */
    303 #define	MIPS3_CONFIG_CU		0x00000008
    304 
    305 #define	MIPS3_CONFIG_DB		0x00000010	/* Primary D-cache line size */
    306 #define	MIPS3_CONFIG_IB		0x00000020	/* Primary I-cache line size */
    307 #define	MIPS3_CONFIG_CACHE_L1_LSIZE(config, bit) \
    308 	(((config) & (bit)) ? 32 : 16)
    309 
    310 #define	MIPS3_CONFIG_DC_MASK	0x000001c0	/* Primary D-cache size */
    311 #define	MIPS3_CONFIG_DC_SHIFT	6
    312 #define	MIPS3_CONFIG_IC_MASK	0x00000e00	/* Primary I-cache size */
    313 #define	MIPS3_CONFIG_IC_SHIFT	9
    314 #define	MIPS3_CONFIG_C_DEFBASE	0x1000		/* default base 2^12 */
    315 #ifdef MIPS3_4100				/* VR4100 core */
    316 /* XXXCDC: THIS MIPS3_4100 SPECIAL CASE SHOULD GO AWAY */
    317 #define	MIPS3_CONFIG_CS		0x00001000	/* cache size mode indication*/
    318 #define	MIPS3_CONFIG_CACHE_SIZE(config, mask, dummy, shift) \
    319 	((((config)&MIPS3_CONFIG_CS)?0x400:0x1000) << (((config) & (mask)) >> (shift)))
    320 #else
    321 #define	MIPS3_CONFIG_CACHE_SIZE(config, mask, base, shift) \
    322 	((base) << (((config) & (mask)) >> (shift)))
    323 #endif
    324 
    325 /* External cache enable: Controls L2 for R5000/Rm527x and L3 for Rm7000 */
    326 #define	MIPS3_CONFIG_SE		0x00001000
    327 
    328 /* Block ordering: 0: sequential, 1: sub-block */
    329 #define	MIPS3_CONFIG_EB		0x00002000
    330 
    331 /* ECC mode - 0: ECC mode, 1: parity mode */
    332 #define	MIPS3_CONFIG_EM		0x00004000
    333 
    334 /* BigEndianMem - 0: kernel and memory are little endian, 1: big endian */
    335 #define	MIPS3_CONFIG_BE		0x00008000
    336 
    337 /* Dirty Shared coherency state - 0: enabled, 1: disabled */
    338 #define	MIPS3_CONFIG_SM		0x00010000
    339 
    340 /* Secondary Cache - 0: present, 1: not present */
    341 #define	MIPS3_CONFIG_SC		0x00020000
    342 
    343 /* System Port width - 0: 64-bit, 1: 32-bit (QED RM523x), 2,3: reserved */
    344 #define	MIPS3_CONFIG_EW_MASK	0x000c0000
    345 #define	MIPS3_CONFIG_EW_SHIFT	18
    346 
    347 /* Secondary Cache port width - 0: 128-bit data path to S-cache, 1: reserved */
    348 #define	MIPS3_CONFIG_SW		0x00100000
    349 
    350 /* Split Secondary Cache Mode - 0: I/D mixed, 1: I/D separated by SCAddr(17) */
    351 #define	MIPS3_CONFIG_SS		0x00200000
    352 
    353 /* Secondary Cache line size */
    354 #define	MIPS3_CONFIG_SB_MASK	0x00c00000
    355 #define	MIPS3_CONFIG_SB_SHIFT	22
    356 #define	MIPS3_CONFIG_CACHE_L2_LSIZE(config) \
    357 	(0x10 << (((config) & MIPS3_CONFIG_SB_MASK) >> MIPS3_CONFIG_SB_SHIFT))
    358 
    359 /* Write back data rate */
    360 #define	MIPS3_CONFIG_EP_MASK	0x0f000000
    361 #define	MIPS3_CONFIG_EP_SHIFT	24
    362 
    363 /* System clock ratio - this value is CPU dependent */
    364 #define	MIPS3_CONFIG_EC_MASK	0x70000000
    365 #define	MIPS3_CONFIG_EC_SHIFT	28
    366 
    367 /* Master-Checker Mode - 1: enabled */
    368 #define	MIPS3_CONFIG_CM		0x80000000
    369 
    370 /*
    371  * Location of exception vectors.
    372  *
    373  * Common vectors:  reset and UTLB miss.
    374  */
    375 #define	MIPS_RESET_EXC_VEC	0xBFC00000
    376 #define	MIPS_UTLB_MISS_EXC_VEC	0x80000000
    377 
    378 /*
    379  * MIPS-1 general exception vector (everything else)
    380  */
    381 #define	MIPS1_GEN_EXC_VEC	0x80000080
    382 
    383 /*
    384  * MIPS-III exception vectors
    385  */
    386 #define	MIPS3_XTLB_MISS_EXC_VEC 0x80000080
    387 #define	MIPS3_CACHE_ERR_EXC_VEC 0x80000100
    388 #define	MIPS3_GEN_EXC_VEC	0x80000180
    389 
    390 /*
    391  * TX79 (R5900) exception vectors
    392  */
    393 #define MIPS_R5900_COUNTER_EXC_VEC		0x80000080
    394 #define MIPS_R5900_DEBUG_EXC_VEC		0x80000100
    395 
    396 /*
    397  * MIPS32/MIPS64 (and some MIPS3) dedicated interrupt vector.
    398  */
    399 #define	MIPS3_INTR_EXC_VEC	0x80000200
    400 
    401 /*
    402  * Coprocessor 0 registers:
    403  *
    404  *				v--- width for mips I,III,32,64
    405  *				     (3=32bit, 6=64bit, i=impl dep)
    406  *  0	MIPS_COP_0_TLB_INDEX	3333 TLB Index.
    407  *  1	MIPS_COP_0_TLB_RANDOM	3333 TLB Random.
    408  *  2	MIPS_COP_0_TLB_LOW	3... r3k TLB entry low.
    409  *  2	MIPS_COP_0_TLB_LO0	.636 r4k TLB entry low.
    410  *  3	MIPS_COP_0_TLB_LO1	.636 r4k TLB entry low, extended.
    411  *  4	MIPS_COP_0_TLB_CONTEXT	3636 TLB Context.
    412  *  5	MIPS_COP_0_TLB_PG_MASK	.333 TLB Page Mask register.
    413  *  6	MIPS_COP_0_TLB_WIRED	.333 Wired TLB number.
    414  *  8	MIPS_COP_0_BAD_VADDR	3636 Bad virtual address.
    415  *  9	MIPS_COP_0_COUNT	.333 Count register.
    416  * 10	MIPS_COP_0_TLB_HI	3636 TLB entry high.
    417  * 11	MIPS_COP_0_COMPARE	.333 Compare (against Count).
    418  * 12	MIPS_COP_0_STATUS	3333 Status register.
    419  * 13	MIPS_COP_0_CAUSE	3333 Exception cause register.
    420  * 14	MIPS_COP_0_EXC_PC	3636 Exception PC.
    421  * 15	MIPS_COP_0_PRID		3333 Processor revision identifier.
    422  * 16	MIPS_COP_0_CONFIG	3333 Configuration register.
    423  * 16/1	MIPS_COP_0_CONFIG1	..33 Configuration register 1.
    424  * 16/2	MIPS_COP_0_CONFIG2	..33 Configuration register 2.
    425  * 16/3	MIPS_COP_0_CONFIG3	..33 Configuration register 3.
    426  * 17	MIPS_COP_0_LLADDR	.336 Load Linked Address.
    427  * 18	MIPS_COP_0_WATCH_LO	.336 WatchLo register.
    428  * 19	MIPS_COP_0_WATCH_HI	.333 WatchHi register.
    429  * 20	MIPS_COP_0_TLB_XCONTEXT .6.6 TLB XContext register.
    430  * 23	MIPS_COP_0_DEBUG	.... Debug JTAG register.
    431  * 24	MIPS_COP_0_DEPC		.... DEPC JTAG register.
    432  * 25	MIPS_COP_0_PERFCNT	..36 Performance Counter register.
    433  * 26	MIPS_COP_0_ECC		.3ii ECC / Error Control register.
    434  * 27	MIPS_COP_0_CACHE_ERR	.3ii Cache Error register.
    435  * 28/0	MIPS_COP_0_TAG_LO	.3ii Cache TagLo register (instr).
    436  * 28/1	MIPS_COP_0_DATA_LO	..ii Cache DataLo register (instr).
    437  * 28/2	MIPS_COP_0_TAG_LO	..ii Cache TagLo register (data).
    438  * 28/3	MIPS_COP_0_DATA_LO	..ii Cache DataLo register (data).
    439  * 29/0	MIPS_COP_0_TAG_HI	.3ii Cache TagHi register (instr).
    440  * 29/1	MIPS_COP_0_DATA_HI	..ii Cache DataHi register (instr).
    441  * 29/2	MIPS_COP_0_TAG_HI	..ii Cache TagHi register (data).
    442  * 29/3	MIPS_COP_0_DATA_HI	..ii Cache DataHi register (data).
    443  * 30	MIPS_COP_0_ERROR_PC	.636 Error EPC register.
    444  * 31	MIPS_COP_0_DESAVE	.... DESAVE JTAG register.
    445  */
    446 #ifdef _LOCORE
    447 #define	_(n)	__CONCAT($,n)
    448 #else
    449 #define	_(n)	n
    450 #endif
    451 #define	MIPS_COP_0_TLB_INDEX	_(0)
    452 #define	MIPS_COP_0_TLB_RANDOM	_(1)
    453 	/* Name and meaning of	TLB bits for $2 differ on r3k and r4k. */
    454 
    455 #define	MIPS_COP_0_TLB_CONTEXT	_(4)
    456 					/* $5 and $6 new with MIPS-III */
    457 #define	MIPS_COP_0_BAD_VADDR	_(8)
    458 #define	MIPS_COP_0_TLB_HI	_(10)
    459 #define	MIPS_COP_0_STATUS	_(12)
    460 #define	MIPS_COP_0_CAUSE	_(13)
    461 #define	MIPS_COP_0_EXC_PC	_(14)
    462 #define	MIPS_COP_0_PRID		_(15)
    463 
    464 
    465 /* MIPS-I */
    466 #define	MIPS_COP_0_TLB_LOW	_(2)
    467 
    468 /* MIPS-III */
    469 #define	MIPS_COP_0_TLB_LO0	_(2)
    470 #define	MIPS_COP_0_TLB_LO1	_(3)
    471 
    472 #define	MIPS_COP_0_TLB_PG_MASK	_(5)
    473 #define	MIPS_COP_0_TLB_WIRED	_(6)
    474 
    475 #define	MIPS_COP_0_COUNT	_(9)
    476 #define	MIPS_COP_0_COMPARE	_(11)
    477 
    478 #define	MIPS_COP_0_CONFIG	_(16)
    479 #define	MIPS_COP_0_LLADDR	_(17)
    480 #define	MIPS_COP_0_WATCH_LO	_(18)
    481 #define	MIPS_COP_0_WATCH_HI	_(19)
    482 #define	MIPS_COP_0_TLB_XCONTEXT _(20)
    483 #define	MIPS_COP_0_ECC		_(26)
    484 #define	MIPS_COP_0_CACHE_ERR	_(27)
    485 #define	MIPS_COP_0_TAG_LO	_(28)
    486 #define	MIPS_COP_0_TAG_HI	_(29)
    487 #define	MIPS_COP_0_ERROR_PC	_(30)
    488 
    489 /* MIPS32/64 */
    490 #define	MIPS_COP_0_DEBUG	_(23)
    491 #define	MIPS_COP_0_DEPC		_(24)
    492 #define	MIPS_COP_0_PERFCNT	_(25)
    493 #define	MIPS_COP_0_DATA_LO	_(28)
    494 #define	MIPS_COP_0_DATA_HI	_(29)
    495 #define	MIPS_COP_0_DESAVE	_(31)
    496 
    497 /*
    498  * Values for the code field in a break instruction.
    499  */
    500 #define	MIPS_BREAK_INSTR	0x0000000d
    501 #define	MIPS_BREAK_VAL_MASK	0x03ff0000
    502 #define	MIPS_BREAK_VAL_SHIFT	16
    503 #define	MIPS_BREAK_KDB_VAL	512
    504 #define	MIPS_BREAK_SSTEP_VAL	513
    505 #define	MIPS_BREAK_BRKPT_VAL	514
    506 #define	MIPS_BREAK_SOVER_VAL	515
    507 #define	MIPS_BREAK_KDB		(MIPS_BREAK_INSTR | \
    508 				(MIPS_BREAK_KDB_VAL << MIPS_BREAK_VAL_SHIFT))
    509 #define	MIPS_BREAK_SSTEP	(MIPS_BREAK_INSTR | \
    510 				(MIPS_BREAK_SSTEP_VAL << MIPS_BREAK_VAL_SHIFT))
    511 #define	MIPS_BREAK_BRKPT	(MIPS_BREAK_INSTR | \
    512 				(MIPS_BREAK_BRKPT_VAL << MIPS_BREAK_VAL_SHIFT))
    513 #define	MIPS_BREAK_SOVER	(MIPS_BREAK_INSTR | \
    514 				(MIPS_BREAK_SOVER_VAL << MIPS_BREAK_VAL_SHIFT))
    515 
    516 /*
    517  * Mininum and maximum cache sizes.
    518  */
    519 #define	MIPS_MIN_CACHE_SIZE	(16 * 1024)
    520 #define	MIPS_MAX_CACHE_SIZE	(256 * 1024)
    521 #define	MIPS3_MAX_PCACHE_SIZE	(32 * 1024)	/* max. primary cache size */
    522 
    523 /*
    524  * The floating point version and status registers.
    525  */
    526 #define	MIPS_FPU_ID	$0
    527 #define	MIPS_FPU_CSR	$31
    528 
    529 /*
    530  * The floating point coprocessor status register bits.
    531  */
    532 #define	MIPS_FPU_ROUNDING_BITS		0x00000003
    533 #define	MIPS_FPU_ROUND_RN		0x00000000
    534 #define	MIPS_FPU_ROUND_RZ		0x00000001
    535 #define	MIPS_FPU_ROUND_RP		0x00000002
    536 #define	MIPS_FPU_ROUND_RM		0x00000003
    537 #define	MIPS_FPU_STICKY_BITS		0x0000007c
    538 #define	MIPS_FPU_STICKY_INEXACT		0x00000004
    539 #define	MIPS_FPU_STICKY_UNDERFLOW	0x00000008
    540 #define	MIPS_FPU_STICKY_OVERFLOW	0x00000010
    541 #define	MIPS_FPU_STICKY_DIV0		0x00000020
    542 #define	MIPS_FPU_STICKY_INVALID		0x00000040
    543 #define	MIPS_FPU_ENABLE_BITS		0x00000f80
    544 #define	MIPS_FPU_ENABLE_INEXACT		0x00000080
    545 #define	MIPS_FPU_ENABLE_UNDERFLOW	0x00000100
    546 #define	MIPS_FPU_ENABLE_OVERFLOW	0x00000200
    547 #define	MIPS_FPU_ENABLE_DIV0		0x00000400
    548 #define	MIPS_FPU_ENABLE_INVALID		0x00000800
    549 #define	MIPS_FPU_EXCEPTION_BITS		0x0003f000
    550 #define	MIPS_FPU_EXCEPTION_INEXACT	0x00001000
    551 #define	MIPS_FPU_EXCEPTION_UNDERFLOW	0x00002000
    552 #define	MIPS_FPU_EXCEPTION_OVERFLOW	0x00004000
    553 #define	MIPS_FPU_EXCEPTION_DIV0		0x00008000
    554 #define	MIPS_FPU_EXCEPTION_INVALID	0x00010000
    555 #define	MIPS_FPU_EXCEPTION_UNIMPL	0x00020000
    556 #define	MIPS_FPU_COND_BIT		0x00800000
    557 #define	MIPS_FPU_FLUSH_BIT		0x01000000	/* r4k,	 MBZ on r3k */
    558 #define	MIPS1_FPC_MBZ_BITS		0xff7c0000
    559 #define	MIPS3_FPC_MBZ_BITS		0xfe7c0000
    560 
    561 
    562 /*
    563  * Constants to determine if have a floating point instruction.
    564  */
    565 #define	MIPS_OPCODE_SHIFT	26
    566 #define	MIPS_OPCODE_C1		0x11
    567 
    568 
    569 /*
    570  * The low part of the TLB entry.
    571  */
    572 #define	MIPS1_TLB_PFN			0xfffff000
    573 #define	MIPS1_TLB_NON_CACHEABLE_BIT	0x00000800
    574 #define	MIPS1_TLB_DIRTY_BIT		0x00000400
    575 #define	MIPS1_TLB_VALID_BIT		0x00000200
    576 #define	MIPS1_TLB_GLOBAL_BIT		0x00000100
    577 
    578 #define	MIPS3_TLB_PFN			0x3fffffc0
    579 #define	MIPS3_TLB_ATTR_MASK		0x00000038
    580 #define	MIPS3_TLB_ATTR_SHIFT		3
    581 #define	MIPS3_TLB_DIRTY_BIT		0x00000004
    582 #define	MIPS3_TLB_VALID_BIT		0x00000002
    583 #define	MIPS3_TLB_GLOBAL_BIT		0x00000001
    584 
    585 #define	MIPS1_TLB_PHYS_PAGE_SHIFT	12
    586 #define	MIPS3_TLB_PHYS_PAGE_SHIFT	6
    587 #define	MIPS1_TLB_PF_NUM		MIPS1_TLB_PFN
    588 #define	MIPS3_TLB_PF_NUM		MIPS3_TLB_PFN
    589 #define	MIPS1_TLB_MOD_BIT		MIPS1_TLB_DIRTY_BIT
    590 #define	MIPS3_TLB_MOD_BIT		MIPS3_TLB_DIRTY_BIT
    591 
    592 /*
    593  * MIPS3_TLB_ATTR values - coherency algorithm:
    594  * 0: cacheable, noncoherent, write-through, no write allocate
    595  * 1: cacheable, noncoherent, write-through, write allocate
    596  * 2: uncached
    597  * 3: cacheable, noncoherent, write-back (noncoherent)
    598  * 4: cacheable, coherent, write-back, exclusive (exclusive)
    599  * 5: cacheable, coherent, write-back, exclusive on write (sharable)
    600  * 6: cacheable, coherent, write-back, update on write (update)
    601  * 7: uncached, accelerated (gather STORE operations)
    602  */
    603 #define	MIPS3_TLB_ATTR_WT		0 /* IDT */
    604 #define	MIPS3_TLB_ATTR_WT_WRITEALLOCATE 1 /* IDT */
    605 #define	MIPS3_TLB_ATTR_UNCACHED		2 /* R4000/R4400, IDT */
    606 #define	MIPS3_TLB_ATTR_WB_NONCOHERENT	3 /* R4000/R4400, IDT */
    607 #define	MIPS3_TLB_ATTR_WB_EXCLUSIVE	4 /* R4000/R4400 */
    608 #define	MIPS3_TLB_ATTR_WB_SHARABLE	5 /* R4000/R4400 */
    609 #define	MIPS3_TLB_ATTR_WB_UPDATE	6 /* R4000/R4400 */
    610 #define	MIPS4_TLB_ATTR_UNCACHED_ACCELERATED 7 /* R10000 */
    611 
    612 
    613 /*
    614  * The high part of the TLB entry.
    615  */
    616 #define	MIPS1_TLB_VPN			0xfffff000
    617 #define	MIPS1_TLB_PID			0x00000fc0
    618 #define	MIPS1_TLB_PID_SHIFT		6
    619 
    620 #define	MIPS3_TLB_VPN2			0xffffe000
    621 #define	MIPS3_TLB_ASID			0x000000ff
    622 
    623 #define	MIPS1_TLB_VIRT_PAGE_NUM		MIPS1_TLB_VPN
    624 #define	MIPS3_TLB_VIRT_PAGE_NUM		MIPS3_TLB_VPN2
    625 #define	MIPS3_TLB_PID			MIPS3_TLB_ASID
    626 #define	MIPS_TLB_VIRT_PAGE_SHIFT	12
    627 
    628 /*
    629  * r3000: shift count to put the index in the right spot.
    630  */
    631 #define	MIPS1_TLB_INDEX_SHIFT		8
    632 
    633 /*
    634  * The first TLB that write random hits.
    635  */
    636 #define	MIPS1_TLB_FIRST_RAND_ENTRY	8
    637 #define	MIPS3_TLB_WIRED_UPAGES		1
    638 
    639 /*
    640  * The number of process id entries.
    641  */
    642 #define	MIPS1_TLB_NUM_PIDS		64
    643 #define	MIPS3_TLB_NUM_ASIDS		256
    644 
    645 /*
    646  * Patch codes to hide CPU design differences between MIPS1 and MIPS3.
    647  */
    648 
    649 /* XXX simonb: this is before MIPS3_PLUS is defined (and is ugly!) */
    650 
    651 #if !(defined(MIPS3) || defined(MIPS4) || defined(MIPS32) || defined(MIPS64)) \
    652     && defined(MIPS1)				/* XXX simonb must be neater! */
    653 #define	MIPS_TLB_PID_SHIFT		MIPS1_TLB_PID_SHIFT
    654 #define	MIPS_TLB_NUM_PIDS		MIPS1_TLB_NUM_PIDS
    655 #endif
    656 
    657 #if (defined(MIPS3) || defined(MIPS4) || defined(MIPS32) || defined(MIPS64)) \
    658     && !defined(MIPS1)				/* XXX simonb must be neater! */
    659 #define	MIPS_TLB_PID_SHIFT		0
    660 #define	MIPS_TLB_NUM_PIDS		MIPS3_TLB_NUM_ASIDS
    661 #endif
    662 
    663 
    664 #if !defined(MIPS_TLB_PID_SHIFT)
    665 #define	MIPS_TLB_PID_SHIFT \
    666     ((MIPS_HAS_R4K_MMU) ? 0 : MIPS1_TLB_PID_SHIFT)
    667 
    668 #define	MIPS_TLB_NUM_PIDS \
    669     ((MIPS_HAS_R4K_MMU) ? MIPS3_TLB_NUM_ASIDS : MIPS1_TLB_NUM_PIDS)
    670 #endif
    671 
    672 /*
    673  * CPU processor revision IDs for company ID == 0 (non mips32/64 chips)
    674  */
    675 #define	MIPS_R2000	0x01	/* MIPS R2000 			ISA I	*/
    676 #define	MIPS_R3000	0x02	/* MIPS R3000 			ISA I	*/
    677 #define	MIPS_R6000	0x03	/* MIPS R6000 			ISA II	*/
    678 #define	MIPS_R4000	0x04	/* MIPS R4000/R4400 		ISA III */
    679 #define	MIPS_R3LSI	0x05	/* LSI Logic R3000 derivative	ISA I	*/
    680 #define	MIPS_R6000A	0x06	/* MIPS R6000A 			ISA II	*/
    681 #define	MIPS_R3IDT	0x07	/* IDT R3041 or RC36100 	ISA I	*/
    682 #define	MIPS_R10000	0x09	/* MIPS R10000			ISA IV	*/
    683 #define	MIPS_R4200	0x0a	/* NEC VR4200 			ISA III */
    684 #define	MIPS_R4300	0x0b	/* NEC VR4300 			ISA III */
    685 #define	MIPS_R4100	0x0c	/* NEC VR4100 			ISA III */
    686 #define	MIPS_R12000	0x0e	/* MIPS R12000			ISA IV	*/
    687 #define	MIPS_R14000	0x0f	/* MIPS R14000			ISA IV	*/
    688 #define	MIPS_R8000	0x10	/* MIPS R8000 Blackbird/TFP	ISA IV	*/
    689 #define	MIPS_RC32300	0x18	/* IDT RC32334,332,355		ISA 32  */
    690 #define	MIPS_R4600	0x20	/* QED R4600 Orion		ISA III */
    691 #define	MIPS_R4700	0x21	/* QED R4700 Orion		ISA III */
    692 #define	MIPS_R3SONY	0x21	/* Sony R3000 based 		ISA I	*/
    693 #define	MIPS_R4650	0x22	/* QED R4650 			ISA III */
    694 #define	MIPS_TX3900	0x22	/* Toshiba TX39 family		ISA I	*/
    695 #define	MIPS_R5000	0x23	/* MIPS R5000 			ISA IV	*/
    696 #define	MIPS_R3NKK	0x23	/* NKK R3000 based 		ISA I	*/
    697 #define	MIPS_RC32364	0x26	/* IDT RC32364 			ISA 32	*/
    698 #define	MIPS_RM7000	0x27	/* QED RM7000			ISA IV  */
    699 #define	MIPS_RM5200	0x28	/* QED RM5200s 			ISA IV	*/
    700 #define	MIPS_TX4900	0x2d	/* Toshiba TX49 family		ISA III */
    701 #define	MIPS_R5900	0x2e	/* Toshiba R5900 (EECore)	ISA --- */
    702 #define	MIPS_RC64470	0x30	/* IDT RC64474/RC64475 		ISA III */
    703 #define	MIPS_TX7900	0x38	/* Toshiba TX79			ISA III+*/
    704 #define	MIPS_R5400	0x54	/* NEC VR5400 			ISA IV	*/
    705 #define	MIPS_R5500	0x55	/* NEC VR5500 			ISA IV	*/
    706 
    707 /*
    708  * CPU revision IDs for some prehistoric processors.
    709  */
    710 
    711 /* For MIPS_R3000 */
    712 #define	MIPS_REV_R3000		0x20
    713 #define	MIPS_REV_R3000A		0x30
    714 
    715 /* For MIPS_TX3900 */
    716 #define	MIPS_REV_TX3912		0x10
    717 #define	MIPS_REV_TX3922		0x30
    718 #define	MIPS_REV_TX3927		0x40
    719 
    720 /* For MIPS_R4000 */
    721 #define	MIPS_REV_R4000_A	0x00
    722 #define	MIPS_REV_R4000_B	0x30
    723 #define	MIPS_REV_R4400_A	0x40
    724 #define	MIPS_REV_R4400_B	0x50
    725 #define	MIPS_REV_R4400_C	0x60
    726 
    727 /* For MIPS_TX4900 */
    728 #define	MIPS_REV_TX4927		0x22
    729 
    730 /*
    731  * CPU processor revision IDs for company ID == 1 (MIPS)
    732  */
    733 #define	MIPS_4Kc	0x80	/* MIPS 4Kc			ISA 32  */
    734 #define	MIPS_5Kc	0x81	/* MIPS 5Kc			ISA 64  */
    735 #define	MIPS_20Kc	0x82	/* MIPS 20Kc			ISA 64  */
    736 #define	MIPS_4KEc	0x84	/* MIPS 4KEc			ISA 32  */
    737 #define	MIPS_4KSc	0x86	/* MIPS 4KSc			ISA 32  */
    738 
    739 /*
    740  * Alchemy (company ID 3) use the processor ID field to donote the CPU core
    741  * revision and the company options field do donate the SOC chip type.
    742  */
    743 /* CPU processor revision IDs */
    744 #define	MIPS_AU_REV1	0x01	/* Alchemy Au1000 (Rev 1)	ISA 32  */
    745 #define	MIPS_AU_REV2	0x02	/* Alchemy Au1000 (Rev 2)	ISA 32  */
    746 /* CPU company options IDs */
    747 #define	MIPS_AU1000	0x00
    748 #define	MIPS_AU1500	0x01
    749 #define	MIPS_AU1100	0x02
    750 
    751 /*
    752  * CPU processor revision IDs for company ID == 4 (SiByte)
    753  */
    754 #define	MIPS_SB1	0x01	/* SiByte SB1	 		ISA 64  */
    755 
    756 /*
    757  * CPU processor revision IDs for company ID == 5 (SandCraft)
    758  */
    759 #define	MIPS_SR7100	0x04	/* SandCraft SR7100 		ISA 64  */
    760 
    761 /*
    762  * FPU processor revision ID
    763  */
    764 #define	MIPS_SOFT	0x00	/* Software emulation		ISA I	*/
    765 #define	MIPS_R2360	0x01	/* MIPS R2360 FPC		ISA I	*/
    766 #define	MIPS_R2010	0x02	/* MIPS R2010 FPC		ISA I	*/
    767 #define	MIPS_R3010	0x03	/* MIPS R3010 FPC		ISA I	*/
    768 #define	MIPS_R6010	0x04	/* MIPS R6010 FPC		ISA II	*/
    769 #define	MIPS_R4010	0x05	/* MIPS R4010 FPC		ISA II	*/
    770 #define	MIPS_R31LSI	0x06	/* LSI Logic derivate		ISA I	*/
    771 #define	MIPS_R3TOSH	0x22	/* Toshiba R3000 based FPU	ISA I	*/
    772 
    773 #ifdef ENABLE_MIPS_TX3900
    774 #include <mips/r3900regs.h>
    775 #endif
    776 #ifdef MIPS3_5900
    777 #include <mips/r5900regs.h>
    778 #endif
    779 #ifdef MIPS64_SB1
    780 #include <mips/sb1regs.h>
    781 #endif
    782 
    783 #endif /* _MIPS_CPUREGS_H_ */
    784