cpuregs.h revision 1.63
1 /* $NetBSD: cpuregs.h,v 1.63 2003/09/28 08:16:51 tsutsui Exp $ */ 2 3 /* 4 * Copyright (c) 1992, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * Ralph Campbell and Rick Macklem. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. Neither the name of the University nor the names of its contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 * @(#)machConst.h 8.1 (Berkeley) 6/10/93 35 * 36 * machConst.h -- 37 * 38 * Machine dependent constants. 39 * 40 * Copyright (C) 1989 Digital Equipment Corporation. 41 * Permission to use, copy, modify, and distribute this software and 42 * its documentation for any purpose and without fee is hereby granted, 43 * provided that the above copyright notice appears in all copies. 44 * Digital Equipment Corporation makes no representations about the 45 * suitability of this software for any purpose. It is provided "as is" 46 * without express or implied warranty. 47 * 48 * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machConst.h, 49 * v 9.2 89/10/21 15:55:22 jhh Exp SPRITE (DECWRL) 50 * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAddrs.h, 51 * v 1.2 89/08/15 18:28:21 rab Exp SPRITE (DECWRL) 52 * from: Header: /sprite/src/kernel/vm/ds3100.md/RCS/vmPmaxConst.h, 53 * v 9.1 89/09/18 17:33:00 shirriff Exp SPRITE (DECWRL) 54 */ 55 56 #ifndef _MIPS_CPUREGS_H_ 57 #define _MIPS_CPUREGS_H_ 58 59 #include <sys/cdefs.h> /* For __CONCAT() */ 60 61 #if defined(_KERNEL_OPT) 62 #include "opt_cputype.h" 63 #endif 64 65 /* 66 * Address space. 67 * 32-bit mips CPUS partition their 32-bit address space into four segments: 68 * 69 * kuseg 0x00000000 - 0x7fffffff User virtual mem, mapped 70 * kseg0 0x80000000 - 0x9fffffff Physical memory, cached, unmapped 71 * kseg1 0xa0000000 - 0xbfffffff Physical memory, uncached, unmapped 72 * kseg2 0xc0000000 - 0xffffffff kernel-virtual, mapped 73 * 74 * mips1 physical memory is limited to 512Mbytes, which is 75 * doubly mapped in kseg0 (cached) and kseg1 (uncached.) 76 * Caching of mapped addresses is controlled by bits in the TLB entry. 77 */ 78 79 #define MIPS_KUSEG_START 0x0 80 #define MIPS_KSEG0_START 0x80000000 81 #define MIPS_KSEG1_START 0xa0000000 82 #define MIPS_KSEG2_START 0xc0000000 83 #define MIPS_MAX_MEM_ADDR 0xbe000000 84 #define MIPS_RESERVED_ADDR 0xbfc80000 85 86 #define MIPS_PHYS_MASK 0x1fffffff 87 88 #define MIPS_KSEG0_TO_PHYS(x) ((unsigned)(x) & MIPS_PHYS_MASK) 89 #define MIPS_PHYS_TO_KSEG0(x) ((unsigned)(x) | MIPS_KSEG0_START) 90 #define MIPS_KSEG1_TO_PHYS(x) ((unsigned)(x) & MIPS_PHYS_MASK) 91 #define MIPS_PHYS_TO_KSEG1(x) ((unsigned)(x) | MIPS_KSEG1_START) 92 93 /* Map virtual address to index in mips3 r4k virtually-indexed cache */ 94 #define MIPS3_VA_TO_CINDEX(x) \ 95 ((unsigned)(x) & 0xffffff | MIPS_KSEG0_START) 96 97 #define MIPS_PHYS_TO_XKPHYS(cca,x) \ 98 ((0x2ULL << 62) | ((unsigned long long)(cca) << 59) | (x)) 99 #define MIPS_XKPHYS_TO_PHYS(x) ((x) & 0x0effffffffffffffULL) 100 101 /* CPU dependent mtc0 hazard hook */ 102 #define COP0_SYNC /* nothing */ 103 #define COP0_HAZARD_FPUENABLE nop; nop; nop; nop; 104 105 /* 106 * The bits in the cause register. 107 * 108 * Bits common to r3000 and r4000: 109 * 110 * MIPS_CR_BR_DELAY Exception happened in branch delay slot. 111 * MIPS_CR_COP_ERR Coprocessor error. 112 * MIPS_CR_IP Interrupt pending bits defined below. 113 * (same meaning as in CAUSE register). 114 * MIPS_CR_EXC_CODE The exception type (see exception codes below). 115 * 116 * Differences: 117 * r3k has 4 bits of execption type, r4k has 5 bits. 118 */ 119 #define MIPS_CR_BR_DELAY 0x80000000 120 #define MIPS_CR_COP_ERR 0x30000000 121 #define MIPS1_CR_EXC_CODE 0x0000003C /* four bits */ 122 #define MIPS3_CR_EXC_CODE 0x0000007C /* five bits */ 123 #define MIPS_CR_IP 0x0000FF00 124 #define MIPS_CR_EXC_CODE_SHIFT 2 125 126 /* 127 * The bits in the status register. All bits are active when set to 1. 128 * 129 * R3000 status register fields: 130 * MIPS_SR_COP_USABILITY Control the usability of the four coprocessors. 131 * MIPS_SR_TS TLB shutdown. 132 * 133 * MIPS_SR_INT_IE Master (current) interrupt enable bit. 134 * 135 * Differences: 136 * r3k has cache control is via frobbing SR register bits, whereas the 137 * r4k cache control is via explicit instructions. 138 * r3k has a 3-entry stack of kernel/user bits, whereas the 139 * r4k has kernel/supervisor/user. 140 */ 141 #define MIPS_SR_COP_USABILITY 0xf0000000 142 #define MIPS_SR_COP_0_BIT 0x10000000 143 #define MIPS_SR_COP_1_BIT 0x20000000 144 145 /* r4k and r3k differences, see below */ 146 147 #define MIPS_SR_MX 0x01000000 /* MIPS64 */ 148 #define MIPS_SR_PX 0x00800000 /* MIPS64 */ 149 #define MIPS_SR_BEV 0x00400000 /* Use boot exception vector */ 150 #define MIPS_SR_TS 0x00200000 151 152 /* r4k and r3k differences, see below */ 153 154 #define MIPS_SR_INT_IE 0x00000001 155 /*#define MIPS_SR_MBZ 0x0f8000c0*/ /* Never used, true for r3k */ 156 /*#define MIPS_SR_INT_MASK 0x0000ff00*/ 157 158 159 /* 160 * The R2000/R3000-specific status register bit definitions. 161 * all bits are active when set to 1. 162 * 163 * MIPS_SR_PARITY_ERR Parity error. 164 * MIPS_SR_CACHE_MISS Most recent D-cache load resulted in a miss. 165 * MIPS_SR_PARITY_ZERO Zero replaces outgoing parity bits. 166 * MIPS_SR_SWAP_CACHES Swap I-cache and D-cache. 167 * MIPS_SR_ISOL_CACHES Isolate D-cache from main memory. 168 * Interrupt enable bits defined below. 169 * MIPS_SR_KU_OLD Old kernel/user mode bit. 1 => user mode. 170 * MIPS_SR_INT_ENA_OLD Old interrupt enable bit. 171 * MIPS_SR_KU_PREV Previous kernel/user mode bit. 1 => user mode. 172 * MIPS_SR_INT_ENA_PREV Previous interrupt enable bit. 173 * MIPS_SR_KU_CUR Current kernel/user mode bit. 1 => user mode. 174 */ 175 176 #define MIPS1_PARITY_ERR 0x00100000 177 #define MIPS1_CACHE_MISS 0x00080000 178 #define MIPS1_PARITY_ZERO 0x00040000 179 #define MIPS1_SWAP_CACHES 0x00020000 180 #define MIPS1_ISOL_CACHES 0x00010000 181 182 #define MIPS1_SR_KU_OLD 0x00000020 /* 2nd stacked KU/IE*/ 183 #define MIPS1_SR_INT_ENA_OLD 0x00000010 /* 2nd stacked KU/IE*/ 184 #define MIPS1_SR_KU_PREV 0x00000008 /* 1st stacked KU/IE*/ 185 #define MIPS1_SR_INT_ENA_PREV 0x00000004 /* 1st stacked KU/IE*/ 186 #define MIPS1_SR_KU_CUR 0x00000002 /* current KU */ 187 188 /* backwards compatibility */ 189 #define MIPS_SR_PARITY_ERR MIPS1_PARITY_ERR 190 #define MIPS_SR_CACHE_MISS MIPS1_CACHE_MISS 191 #define MIPS_SR_PARITY_ZERO MIPS1_PARITY_ZERO 192 #define MIPS_SR_SWAP_CACHES MIPS1_SWAP_CACHES 193 #define MIPS_SR_ISOL_CACHES MIPS1_ISOL_CACHES 194 195 #define MIPS_SR_KU_OLD MIPS1_SR_KU_OLD 196 #define MIPS_SR_INT_ENA_OLD MIPS1_SR_INT_ENA_OLD 197 #define MIPS_SR_KU_PREV MIPS1_SR_KU_PREV 198 #define MIPS_SR_KU_CUR MIPS1_SR_KU_CUR 199 #define MIPS_SR_INT_ENA_PREV MIPS1_SR_INT_ENA_PREV 200 201 /* 202 * R4000 status register bit definitons, 203 * where different from r2000/r3000. 204 */ 205 #define MIPS3_SR_XX 0x80000000 206 #define MIPS3_SR_RP 0x08000000 207 #define MIPS3_SR_FR 0x04000000 208 #define MIPS3_SR_RE 0x02000000 209 210 #define MIPS3_SR_DIAG_DL 0x01000000 /* QED 52xx */ 211 #define MIPS3_SR_DIAG_IL 0x00800000 /* QED 52xx */ 212 #define MIPS3_SR_SR 0x00100000 213 #define MIPS3_SR_EIE 0x00100000 /* TX79/R5900 */ 214 #define MIPS3_SR_NMI 0x00080000 /* MIPS32/64 */ 215 #define MIPS3_SR_DIAG_CH 0x00040000 216 #define MIPS3_SR_DIAG_CE 0x00020000 217 #define MIPS3_SR_DIAG_PE 0x00010000 218 #define MIPS3_SR_KX 0x00000080 219 #define MIPS3_SR_SX 0x00000040 220 #define MIPS3_SR_UX 0x00000020 221 #define MIPS3_SR_KSU_MASK 0x00000018 222 #define MIPS3_SR_KSU_USER 0x00000010 223 #define MIPS3_SR_KSU_SUPER 0x00000008 224 #define MIPS3_SR_KSU_KERNEL 0x00000000 225 #define MIPS3_SR_ERL 0x00000004 226 #define MIPS3_SR_EXL 0x00000002 227 228 #ifdef MIPS3_5900 229 #undef MIPS_SR_INT_IE 230 #define MIPS_SR_INT_IE 0x00010001 /* XXX */ 231 #endif 232 233 #define MIPS_SR_SOFT_RESET MIPS3_SR_SOFT_RESET 234 #define MIPS_SR_DIAG_CH MIPS3_SR_DIAG_CH 235 #define MIPS_SR_DIAG_CE MIPS3_SR_DIAG_CE 236 #define MIPS_SR_DIAG_PE MIPS3_SR_DIAG_PE 237 #define MIPS_SR_KX MIPS3_SR_KX 238 #define MIPS_SR_SX MIPS3_SR_SX 239 #define MIPS_SR_UX MIPS3_SR_UX 240 241 #define MIPS_SR_KSU_MASK MIPS3_SR_KSU_MASK 242 #define MIPS_SR_KSU_USER MIPS3_SR_KSU_USER 243 #define MIPS_SR_KSU_SUPER MIPS3_SR_KSU_SUPER 244 #define MIPS_SR_KSU_KERNEL MIPS3_SR_KSU_KERNEL 245 #define MIPS_SR_ERL MIPS3_SR_ERL 246 #define MIPS_SR_EXL MIPS3_SR_EXL 247 248 249 /* 250 * The interrupt masks. 251 * If a bit in the mask is 1 then the interrupt is enabled (or pending). 252 */ 253 #define MIPS_INT_MASK 0xff00 254 #define MIPS_INT_MASK_5 0x8000 255 #define MIPS_INT_MASK_4 0x4000 256 #define MIPS_INT_MASK_3 0x2000 257 #define MIPS_INT_MASK_2 0x1000 258 #define MIPS_INT_MASK_1 0x0800 259 #define MIPS_INT_MASK_0 0x0400 260 #define MIPS_HARD_INT_MASK 0xfc00 261 #define MIPS_SOFT_INT_MASK_1 0x0200 262 #define MIPS_SOFT_INT_MASK_0 0x0100 263 264 /* 265 * mips3 CPUs have on-chip timer at INT_MASK_5. Each platform can 266 * choose to enable this interrupt. 267 */ 268 #if defined(MIPS3_ENABLE_CLOCK_INTR) 269 #define MIPS3_INT_MASK MIPS_INT_MASK 270 #define MIPS3_HARD_INT_MASK MIPS_HARD_INT_MASK 271 #else 272 #define MIPS3_INT_MASK (MIPS_INT_MASK & ~MIPS_INT_MASK_5) 273 #define MIPS3_HARD_INT_MASK (MIPS_HARD_INT_MASK & ~MIPS_INT_MASK_5) 274 #endif 275 276 /* 277 * The bits in the context register. 278 */ 279 #define MIPS1_CNTXT_PTE_BASE 0xFFE00000 280 #define MIPS1_CNTXT_BAD_VPN 0x001FFFFC 281 282 #define MIPS3_CNTXT_PTE_BASE 0xFF800000 283 #define MIPS3_CNTXT_BAD_VPN2 0x007FFFF0 284 285 /* 286 * The bits in the MIPS3 config register. 287 * 288 * bit 0..5: R/W, Bit 6..31: R/O 289 */ 290 291 /* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */ 292 #define MIPS3_CONFIG_K0_MASK 0x00000007 293 294 /* 295 * R/W Update on Store Conditional 296 * 0: Store Conditional uses coherency algorithm specified by TLB 297 * 1: Store Conditional uses cacheable coherent update on write 298 */ 299 #define MIPS3_CONFIG_CU 0x00000008 300 301 #define MIPS3_CONFIG_DB 0x00000010 /* Primary D-cache line size */ 302 #define MIPS3_CONFIG_IB 0x00000020 /* Primary I-cache line size */ 303 #define MIPS3_CONFIG_CACHE_L1_LSIZE(config, bit) \ 304 (((config) & (bit)) ? 32 : 16) 305 306 #define MIPS3_CONFIG_DC_MASK 0x000001c0 /* Primary D-cache size */ 307 #define MIPS3_CONFIG_DC_SHIFT 6 308 #define MIPS3_CONFIG_IC_MASK 0x00000e00 /* Primary I-cache size */ 309 #define MIPS3_CONFIG_IC_SHIFT 9 310 #define MIPS3_CONFIG_C_DEFBASE 0x1000 /* default base 2^12 */ 311 #ifdef MIPS3_4100 /* VR4100 core */ 312 /* XXXCDC: THIS MIPS3_4100 SPECIAL CASE SHOULD GO AWAY */ 313 #define MIPS3_CONFIG_CS 0x00001000 /* cache size mode indication*/ 314 #define MIPS3_CONFIG_CACHE_SIZE(config, mask, dummy, shift) \ 315 ((((config)&MIPS3_CONFIG_CS)?0x400:0x1000) << (((config) & (mask)) >> (shift))) 316 #else 317 #define MIPS3_CONFIG_CACHE_SIZE(config, mask, base, shift) \ 318 ((base) << (((config) & (mask)) >> (shift))) 319 #endif 320 321 /* External cache enable: Controls L2 for R5000/Rm527x and L3 for Rm7000 */ 322 #define MIPS3_CONFIG_SE 0x00001000 323 324 /* Block ordering: 0: sequential, 1: sub-block */ 325 #define MIPS3_CONFIG_EB 0x00002000 326 327 /* ECC mode - 0: ECC mode, 1: parity mode */ 328 #define MIPS3_CONFIG_EM 0x00004000 329 330 /* BigEndianMem - 0: kernel and memory are little endian, 1: big endian */ 331 #define MIPS3_CONFIG_BE 0x00008000 332 333 /* Dirty Shared coherency state - 0: enabled, 1: disabled */ 334 #define MIPS3_CONFIG_SM 0x00010000 335 336 /* Secondary Cache - 0: present, 1: not present */ 337 #define MIPS3_CONFIG_SC 0x00020000 338 339 /* System Port width - 0: 64-bit, 1: 32-bit (QED RM523x), 2,3: reserved */ 340 #define MIPS3_CONFIG_EW_MASK 0x000c0000 341 #define MIPS3_CONFIG_EW_SHIFT 18 342 343 /* Secondary Cache port width - 0: 128-bit data path to S-cache, 1: reserved */ 344 #define MIPS3_CONFIG_SW 0x00100000 345 346 /* Split Secondary Cache Mode - 0: I/D mixed, 1: I/D separated by SCAddr(17) */ 347 #define MIPS3_CONFIG_SS 0x00200000 348 349 /* Secondary Cache line size */ 350 #define MIPS3_CONFIG_SB_MASK 0x00c00000 351 #define MIPS3_CONFIG_SB_SHIFT 22 352 #define MIPS3_CONFIG_CACHE_L2_LSIZE(config) \ 353 (0x10 << (((config) & MIPS3_CONFIG_SB_MASK) >> MIPS3_CONFIG_SB_SHIFT)) 354 355 /* Write back data rate */ 356 #define MIPS3_CONFIG_EP_MASK 0x0f000000 357 #define MIPS3_CONFIG_EP_SHIFT 24 358 359 /* System clock ratio - this value is CPU dependent */ 360 #define MIPS3_CONFIG_EC_MASK 0x70000000 361 #define MIPS3_CONFIG_EC_SHIFT 28 362 363 /* Master-Checker Mode - 1: enabled */ 364 #define MIPS3_CONFIG_CM 0x80000000 365 366 /* 367 * Location of exception vectors. 368 * 369 * Common vectors: reset and UTLB miss. 370 */ 371 #define MIPS_RESET_EXC_VEC 0xBFC00000 372 #define MIPS_UTLB_MISS_EXC_VEC 0x80000000 373 374 /* 375 * MIPS-1 general exception vector (everything else) 376 */ 377 #define MIPS1_GEN_EXC_VEC 0x80000080 378 379 /* 380 * MIPS-III exception vectors 381 */ 382 #define MIPS3_XTLB_MISS_EXC_VEC 0x80000080 383 #define MIPS3_CACHE_ERR_EXC_VEC 0x80000100 384 #define MIPS3_GEN_EXC_VEC 0x80000180 385 386 /* 387 * TX79 (R5900) exception vectors 388 */ 389 #define MIPS_R5900_COUNTER_EXC_VEC 0x80000080 390 #define MIPS_R5900_DEBUG_EXC_VEC 0x80000100 391 392 /* 393 * MIPS32/MIPS64 (and some MIPS3) dedicated interrupt vector. 394 */ 395 #define MIPS3_INTR_EXC_VEC 0x80000200 396 397 /* 398 * Coprocessor 0 registers: 399 * 400 * v--- width for mips I,III,32,64 401 * (3=32bit, 6=64bit, i=impl dep) 402 * 0 MIPS_COP_0_TLB_INDEX 3333 TLB Index. 403 * 1 MIPS_COP_0_TLB_RANDOM 3333 TLB Random. 404 * 2 MIPS_COP_0_TLB_LOW 3... r3k TLB entry low. 405 * 2 MIPS_COP_0_TLB_LO0 .636 r4k TLB entry low. 406 * 3 MIPS_COP_0_TLB_LO1 .636 r4k TLB entry low, extended. 407 * 4 MIPS_COP_0_TLB_CONTEXT 3636 TLB Context. 408 * 5 MIPS_COP_0_TLB_PG_MASK .333 TLB Page Mask register. 409 * 6 MIPS_COP_0_TLB_WIRED .333 Wired TLB number. 410 * 8 MIPS_COP_0_BAD_VADDR 3636 Bad virtual address. 411 * 9 MIPS_COP_0_COUNT .333 Count register. 412 * 10 MIPS_COP_0_TLB_HI 3636 TLB entry high. 413 * 11 MIPS_COP_0_COMPARE .333 Compare (against Count). 414 * 12 MIPS_COP_0_STATUS 3333 Status register. 415 * 13 MIPS_COP_0_CAUSE 3333 Exception cause register. 416 * 14 MIPS_COP_0_EXC_PC 3636 Exception PC. 417 * 15 MIPS_COP_0_PRID 3333 Processor revision identifier. 418 * 16 MIPS_COP_0_CONFIG 3333 Configuration register. 419 * 16/1 MIPS_COP_0_CONFIG1 ..33 Configuration register 1. 420 * 16/2 MIPS_COP_0_CONFIG2 ..33 Configuration register 2. 421 * 16/3 MIPS_COP_0_CONFIG3 ..33 Configuration register 3. 422 * 17 MIPS_COP_0_LLADDR .336 Load Linked Address. 423 * 18 MIPS_COP_0_WATCH_LO .336 WatchLo register. 424 * 19 MIPS_COP_0_WATCH_HI .333 WatchHi register. 425 * 20 MIPS_COP_0_TLB_XCONTEXT .6.6 TLB XContext register. 426 * 23 MIPS_COP_0_DEBUG .... Debug JTAG register. 427 * 24 MIPS_COP_0_DEPC .... DEPC JTAG register. 428 * 25 MIPS_COP_0_PERFCNT ..36 Performance Counter register. 429 * 26 MIPS_COP_0_ECC .3ii ECC / Error Control register. 430 * 27 MIPS_COP_0_CACHE_ERR .3ii Cache Error register. 431 * 28/0 MIPS_COP_0_TAG_LO .3ii Cache TagLo register (instr). 432 * 28/1 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (instr). 433 * 28/2 MIPS_COP_0_TAG_LO ..ii Cache TagLo register (data). 434 * 28/3 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (data). 435 * 29/0 MIPS_COP_0_TAG_HI .3ii Cache TagHi register (instr). 436 * 29/1 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (instr). 437 * 29/2 MIPS_COP_0_TAG_HI ..ii Cache TagHi register (data). 438 * 29/3 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (data). 439 * 30 MIPS_COP_0_ERROR_PC .636 Error EPC register. 440 * 31 MIPS_COP_0_DESAVE .... DESAVE JTAG register. 441 */ 442 #ifdef _LOCORE 443 #define _(n) __CONCAT($,n) 444 #else 445 #define _(n) n 446 #endif 447 #define MIPS_COP_0_TLB_INDEX _(0) 448 #define MIPS_COP_0_TLB_RANDOM _(1) 449 /* Name and meaning of TLB bits for $2 differ on r3k and r4k. */ 450 451 #define MIPS_COP_0_TLB_CONTEXT _(4) 452 /* $5 and $6 new with MIPS-III */ 453 #define MIPS_COP_0_BAD_VADDR _(8) 454 #define MIPS_COP_0_TLB_HI _(10) 455 #define MIPS_COP_0_STATUS _(12) 456 #define MIPS_COP_0_CAUSE _(13) 457 #define MIPS_COP_0_EXC_PC _(14) 458 #define MIPS_COP_0_PRID _(15) 459 460 461 /* MIPS-I */ 462 #define MIPS_COP_0_TLB_LOW _(2) 463 464 /* MIPS-III */ 465 #define MIPS_COP_0_TLB_LO0 _(2) 466 #define MIPS_COP_0_TLB_LO1 _(3) 467 468 #define MIPS_COP_0_TLB_PG_MASK _(5) 469 #define MIPS_COP_0_TLB_WIRED _(6) 470 471 #define MIPS_COP_0_COUNT _(9) 472 #define MIPS_COP_0_COMPARE _(11) 473 474 #define MIPS_COP_0_CONFIG _(16) 475 #define MIPS_COP_0_LLADDR _(17) 476 #define MIPS_COP_0_WATCH_LO _(18) 477 #define MIPS_COP_0_WATCH_HI _(19) 478 #define MIPS_COP_0_TLB_XCONTEXT _(20) 479 #define MIPS_COP_0_ECC _(26) 480 #define MIPS_COP_0_CACHE_ERR _(27) 481 #define MIPS_COP_0_TAG_LO _(28) 482 #define MIPS_COP_0_TAG_HI _(29) 483 #define MIPS_COP_0_ERROR_PC _(30) 484 485 /* MIPS32/64 */ 486 #define MIPS_COP_0_DEBUG _(23) 487 #define MIPS_COP_0_DEPC _(24) 488 #define MIPS_COP_0_PERFCNT _(25) 489 #define MIPS_COP_0_DATA_LO _(28) 490 #define MIPS_COP_0_DATA_HI _(29) 491 #define MIPS_COP_0_DESAVE _(31) 492 493 /* 494 * Values for the code field in a break instruction. 495 */ 496 #define MIPS_BREAK_INSTR 0x0000000d 497 #define MIPS_BREAK_VAL_MASK 0x03ff0000 498 #define MIPS_BREAK_VAL_SHIFT 16 499 #define MIPS_BREAK_KDB_VAL 512 500 #define MIPS_BREAK_SSTEP_VAL 513 501 #define MIPS_BREAK_BRKPT_VAL 514 502 #define MIPS_BREAK_SOVER_VAL 515 503 #define MIPS_BREAK_KDB (MIPS_BREAK_INSTR | \ 504 (MIPS_BREAK_KDB_VAL << MIPS_BREAK_VAL_SHIFT)) 505 #define MIPS_BREAK_SSTEP (MIPS_BREAK_INSTR | \ 506 (MIPS_BREAK_SSTEP_VAL << MIPS_BREAK_VAL_SHIFT)) 507 #define MIPS_BREAK_BRKPT (MIPS_BREAK_INSTR | \ 508 (MIPS_BREAK_BRKPT_VAL << MIPS_BREAK_VAL_SHIFT)) 509 #define MIPS_BREAK_SOVER (MIPS_BREAK_INSTR | \ 510 (MIPS_BREAK_SOVER_VAL << MIPS_BREAK_VAL_SHIFT)) 511 512 /* 513 * Mininum and maximum cache sizes. 514 */ 515 #define MIPS_MIN_CACHE_SIZE (16 * 1024) 516 #define MIPS_MAX_CACHE_SIZE (256 * 1024) 517 #define MIPS3_MAX_PCACHE_SIZE (32 * 1024) /* max. primary cache size */ 518 519 /* 520 * The floating point version and status registers. 521 */ 522 #define MIPS_FPU_ID $0 523 #define MIPS_FPU_CSR $31 524 525 /* 526 * The floating point coprocessor status register bits. 527 */ 528 #define MIPS_FPU_ROUNDING_BITS 0x00000003 529 #define MIPS_FPU_ROUND_RN 0x00000000 530 #define MIPS_FPU_ROUND_RZ 0x00000001 531 #define MIPS_FPU_ROUND_RP 0x00000002 532 #define MIPS_FPU_ROUND_RM 0x00000003 533 #define MIPS_FPU_STICKY_BITS 0x0000007c 534 #define MIPS_FPU_STICKY_INEXACT 0x00000004 535 #define MIPS_FPU_STICKY_UNDERFLOW 0x00000008 536 #define MIPS_FPU_STICKY_OVERFLOW 0x00000010 537 #define MIPS_FPU_STICKY_DIV0 0x00000020 538 #define MIPS_FPU_STICKY_INVALID 0x00000040 539 #define MIPS_FPU_ENABLE_BITS 0x00000f80 540 #define MIPS_FPU_ENABLE_INEXACT 0x00000080 541 #define MIPS_FPU_ENABLE_UNDERFLOW 0x00000100 542 #define MIPS_FPU_ENABLE_OVERFLOW 0x00000200 543 #define MIPS_FPU_ENABLE_DIV0 0x00000400 544 #define MIPS_FPU_ENABLE_INVALID 0x00000800 545 #define MIPS_FPU_EXCEPTION_BITS 0x0003f000 546 #define MIPS_FPU_EXCEPTION_INEXACT 0x00001000 547 #define MIPS_FPU_EXCEPTION_UNDERFLOW 0x00002000 548 #define MIPS_FPU_EXCEPTION_OVERFLOW 0x00004000 549 #define MIPS_FPU_EXCEPTION_DIV0 0x00008000 550 #define MIPS_FPU_EXCEPTION_INVALID 0x00010000 551 #define MIPS_FPU_EXCEPTION_UNIMPL 0x00020000 552 #define MIPS_FPU_COND_BIT 0x00800000 553 #define MIPS_FPU_FLUSH_BIT 0x01000000 /* r4k, MBZ on r3k */ 554 #define MIPS1_FPC_MBZ_BITS 0xff7c0000 555 #define MIPS3_FPC_MBZ_BITS 0xfe7c0000 556 557 558 /* 559 * Constants to determine if have a floating point instruction. 560 */ 561 #define MIPS_OPCODE_SHIFT 26 562 #define MIPS_OPCODE_C1 0x11 563 564 565 /* 566 * The low part of the TLB entry. 567 */ 568 #define MIPS1_TLB_PFN 0xfffff000 569 #define MIPS1_TLB_NON_CACHEABLE_BIT 0x00000800 570 #define MIPS1_TLB_DIRTY_BIT 0x00000400 571 #define MIPS1_TLB_VALID_BIT 0x00000200 572 #define MIPS1_TLB_GLOBAL_BIT 0x00000100 573 574 #define MIPS3_TLB_PFN 0x3fffffc0 575 #define MIPS3_TLB_ATTR_MASK 0x00000038 576 #define MIPS3_TLB_ATTR_SHIFT 3 577 #define MIPS3_TLB_DIRTY_BIT 0x00000004 578 #define MIPS3_TLB_VALID_BIT 0x00000002 579 #define MIPS3_TLB_GLOBAL_BIT 0x00000001 580 581 #define MIPS1_TLB_PHYS_PAGE_SHIFT 12 582 #define MIPS3_TLB_PHYS_PAGE_SHIFT 6 583 #define MIPS1_TLB_PF_NUM MIPS1_TLB_PFN 584 #define MIPS3_TLB_PF_NUM MIPS3_TLB_PFN 585 #define MIPS1_TLB_MOD_BIT MIPS1_TLB_DIRTY_BIT 586 #define MIPS3_TLB_MOD_BIT MIPS3_TLB_DIRTY_BIT 587 588 /* 589 * MIPS3_TLB_ATTR values - coherency algorithm: 590 * 0: cacheable, noncoherent, write-through, no write allocate 591 * 1: cacheable, noncoherent, write-through, write allocate 592 * 2: uncached 593 * 3: cacheable, noncoherent, write-back (noncoherent) 594 * 4: cacheable, coherent, write-back, exclusive (exclusive) 595 * 5: cacheable, coherent, write-back, exclusive on write (sharable) 596 * 6: cacheable, coherent, write-back, update on write (update) 597 * 7: uncached, accelerated (gather STORE operations) 598 */ 599 #define MIPS3_TLB_ATTR_WT 0 /* IDT */ 600 #define MIPS3_TLB_ATTR_WT_WRITEALLOCATE 1 /* IDT */ 601 #define MIPS3_TLB_ATTR_UNCACHED 2 /* R4000/R4400, IDT */ 602 #define MIPS3_TLB_ATTR_WB_NONCOHERENT 3 /* R4000/R4400, IDT */ 603 #define MIPS3_TLB_ATTR_WB_EXCLUSIVE 4 /* R4000/R4400 */ 604 #define MIPS3_TLB_ATTR_WB_SHARABLE 5 /* R4000/R4400 */ 605 #define MIPS3_TLB_ATTR_WB_UPDATE 6 /* R4000/R4400 */ 606 #define MIPS4_TLB_ATTR_UNCACHED_ACCELERATED 7 /* R10000 */ 607 608 609 /* 610 * The high part of the TLB entry. 611 */ 612 #define MIPS1_TLB_VPN 0xfffff000 613 #define MIPS1_TLB_PID 0x00000fc0 614 #define MIPS1_TLB_PID_SHIFT 6 615 616 #define MIPS3_TLB_VPN2 0xffffe000 617 #define MIPS3_TLB_ASID 0x000000ff 618 619 #define MIPS1_TLB_VIRT_PAGE_NUM MIPS1_TLB_VPN 620 #define MIPS3_TLB_VIRT_PAGE_NUM MIPS3_TLB_VPN2 621 #define MIPS3_TLB_PID MIPS3_TLB_ASID 622 #define MIPS_TLB_VIRT_PAGE_SHIFT 12 623 624 /* 625 * r3000: shift count to put the index in the right spot. 626 */ 627 #define MIPS1_TLB_INDEX_SHIFT 8 628 629 /* 630 * The first TLB that write random hits. 631 */ 632 #define MIPS1_TLB_FIRST_RAND_ENTRY 8 633 #define MIPS3_TLB_WIRED_UPAGES 1 634 635 /* 636 * The number of process id entries. 637 */ 638 #define MIPS1_TLB_NUM_PIDS 64 639 #define MIPS3_TLB_NUM_ASIDS 256 640 641 /* 642 * Patch codes to hide CPU design differences between MIPS1 and MIPS3. 643 */ 644 645 /* XXX simonb: this is before MIPS3_PLUS is defined (and is ugly!) */ 646 647 #if !(defined(MIPS3) || defined(MIPS4) || defined(MIPS32) || defined(MIPS64)) \ 648 && defined(MIPS1) /* XXX simonb must be neater! */ 649 #define MIPS_TLB_PID_SHIFT MIPS1_TLB_PID_SHIFT 650 #define MIPS_TLB_NUM_PIDS MIPS1_TLB_NUM_PIDS 651 #endif 652 653 #if (defined(MIPS3) || defined(MIPS4) || defined(MIPS32) || defined(MIPS64)) \ 654 && !defined(MIPS1) /* XXX simonb must be neater! */ 655 #define MIPS_TLB_PID_SHIFT 0 656 #define MIPS_TLB_NUM_PIDS MIPS3_TLB_NUM_ASIDS 657 #endif 658 659 660 #if !defined(MIPS_TLB_PID_SHIFT) 661 #define MIPS_TLB_PID_SHIFT \ 662 ((MIPS_HAS_R4K_MMU) ? 0 : MIPS1_TLB_PID_SHIFT) 663 664 #define MIPS_TLB_NUM_PIDS \ 665 ((MIPS_HAS_R4K_MMU) ? MIPS3_TLB_NUM_ASIDS : MIPS1_TLB_NUM_PIDS) 666 #endif 667 668 /* 669 * CPU processor revision IDs for company ID == 0 (non mips32/64 chips) 670 */ 671 #define MIPS_R2000 0x01 /* MIPS R2000 ISA I */ 672 #define MIPS_R3000 0x02 /* MIPS R3000 ISA I */ 673 #define MIPS_R6000 0x03 /* MIPS R6000 ISA II */ 674 #define MIPS_R4000 0x04 /* MIPS R4000/R4400 ISA III */ 675 #define MIPS_R3LSI 0x05 /* LSI Logic R3000 derivative ISA I */ 676 #define MIPS_R6000A 0x06 /* MIPS R6000A ISA II */ 677 #define MIPS_R3IDT 0x07 /* IDT R3041 or RC36100 ISA I */ 678 #define MIPS_R10000 0x09 /* MIPS R10000 ISA IV */ 679 #define MIPS_R4200 0x0a /* NEC VR4200 ISA III */ 680 #define MIPS_R4300 0x0b /* NEC VR4300 ISA III */ 681 #define MIPS_R4100 0x0c /* NEC VR4100 ISA III */ 682 #define MIPS_R12000 0x0e /* MIPS R12000 ISA IV */ 683 #define MIPS_R14000 0x0f /* MIPS R14000 ISA IV */ 684 #define MIPS_R8000 0x10 /* MIPS R8000 Blackbird/TFP ISA IV */ 685 #define MIPS_RC32300 0x18 /* IDT RC32334,332,355 ISA 32 */ 686 #define MIPS_R4600 0x20 /* QED R4600 Orion ISA III */ 687 #define MIPS_R4700 0x21 /* QED R4700 Orion ISA III */ 688 #define MIPS_R3SONY 0x21 /* Sony R3000 based ISA I */ 689 #define MIPS_R4650 0x22 /* QED R4650 ISA III */ 690 #define MIPS_TX3900 0x22 /* Toshiba TX39 family ISA I */ 691 #define MIPS_R5000 0x23 /* MIPS R5000 ISA IV */ 692 #define MIPS_R3NKK 0x23 /* NKK R3000 based ISA I */ 693 #define MIPS_RC32364 0x26 /* IDT RC32364 ISA 32 */ 694 #define MIPS_RM7000 0x27 /* QED RM7000 ISA IV */ 695 #define MIPS_RM5200 0x28 /* QED RM5200s ISA IV */ 696 #define MIPS_TX4900 0x2d /* Toshiba TX49 family ISA III */ 697 #define MIPS_R5900 0x2e /* Toshiba R5900 (EECore) ISA --- */ 698 #define MIPS_RC64470 0x30 /* IDT RC64474/RC64475 ISA III */ 699 #define MIPS_TX7900 0x38 /* Toshiba TX79 ISA III+*/ 700 #define MIPS_R5400 0x54 /* NEC VR5400 ISA IV */ 701 #define MIPS_R5500 0x55 /* NEC VR5500 ISA IV */ 702 703 /* 704 * CPU revision IDs for some prehistoric processors. 705 */ 706 707 /* For MIPS_R3000 */ 708 #define MIPS_REV_R3000 0x20 709 #define MIPS_REV_R3000A 0x30 710 711 /* For MIPS_TX3900 */ 712 #define MIPS_REV_TX3912 0x10 713 #define MIPS_REV_TX3922 0x30 714 #define MIPS_REV_TX3927 0x40 715 716 /* For MIPS_R4000 */ 717 #define MIPS_REV_R4000_A 0x00 718 #define MIPS_REV_R4000_B 0x22 719 #define MIPS_REV_R4000_C 0x30 720 #define MIPS_REV_R4400_A 0x40 721 #define MIPS_REV_R4400_B 0x50 722 #define MIPS_REV_R4400_C 0x60 723 724 /* For MIPS_TX4900 */ 725 #define MIPS_REV_TX4927 0x22 726 727 /* 728 * CPU processor revision IDs for company ID == 1 (MIPS) 729 */ 730 #define MIPS_4Kc 0x80 /* MIPS 4Kc ISA 32 */ 731 #define MIPS_5Kc 0x81 /* MIPS 5Kc ISA 64 */ 732 #define MIPS_20Kc 0x82 /* MIPS 20Kc ISA 64 */ 733 #define MIPS_4KEc 0x84 /* MIPS 4KEc ISA 32 */ 734 #define MIPS_4KSc 0x86 /* MIPS 4KSc ISA 32 */ 735 736 /* 737 * Alchemy (company ID 3) use the processor ID field to donote the CPU core 738 * revision and the company options field do donate the SOC chip type. 739 */ 740 /* CPU processor revision IDs */ 741 #define MIPS_AU_REV1 0x01 /* Alchemy Au1000 (Rev 1) ISA 32 */ 742 #define MIPS_AU_REV2 0x02 /* Alchemy Au1000 (Rev 2) ISA 32 */ 743 /* CPU company options IDs */ 744 #define MIPS_AU1000 0x00 745 #define MIPS_AU1500 0x01 746 #define MIPS_AU1100 0x02 747 748 /* 749 * CPU processor revision IDs for company ID == 4 (SiByte) 750 */ 751 #define MIPS_SB1 0x01 /* SiByte SB1 ISA 64 */ 752 753 /* 754 * CPU processor revision IDs for company ID == 5 (SandCraft) 755 */ 756 #define MIPS_SR7100 0x04 /* SandCraft SR7100 ISA 64 */ 757 758 /* 759 * FPU processor revision ID 760 */ 761 #define MIPS_SOFT 0x00 /* Software emulation ISA I */ 762 #define MIPS_R2360 0x01 /* MIPS R2360 FPC ISA I */ 763 #define MIPS_R2010 0x02 /* MIPS R2010 FPC ISA I */ 764 #define MIPS_R3010 0x03 /* MIPS R3010 FPC ISA I */ 765 #define MIPS_R6010 0x04 /* MIPS R6010 FPC ISA II */ 766 #define MIPS_R4010 0x05 /* MIPS R4010 FPC ISA II */ 767 #define MIPS_R31LSI 0x06 /* LSI Logic derivate ISA I */ 768 #define MIPS_R3TOSH 0x22 /* Toshiba R3000 based FPU ISA I */ 769 770 #ifdef ENABLE_MIPS_TX3900 771 #include <mips/r3900regs.h> 772 #endif 773 #ifdef MIPS3_5900 774 #include <mips/r5900regs.h> 775 #endif 776 #ifdef MIPS64_SB1 777 #include <mips/sb1regs.h> 778 #endif 779 780 #endif /* _MIPS_CPUREGS_H_ */ 781
Indexes created Wed Oct 29 20:09:47 GMT 2025