cpuregs.h revision 1.74.28.23
1 /* cpuregs.h,v 1.74.28.20 2011/04/29 08:26:20 matt Exp */ 2 3 /* 4 * Copyright (c) 1992, 1993 5 * The Regents of the University of California. All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * Ralph Campbell and Rick Macklem. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. Neither the name of the University nor the names of its contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 * @(#)machConst.h 8.1 (Berkeley) 6/10/93 35 * 36 * machConst.h -- 37 * 38 * Machine dependent constants. 39 * 40 * Copyright (C) 1989 Digital Equipment Corporation. 41 * Permission to use, copy, modify, and distribute this software and 42 * its documentation for any purpose and without fee is hereby granted, 43 * provided that the above copyright notice appears in all copies. 44 * Digital Equipment Corporation makes no representations about the 45 * suitability of this software for any purpose. It is provided "as is" 46 * without express or implied warranty. 47 * 48 * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machConst.h, 49 * v 9.2 89/10/21 15:55:22 jhh Exp SPRITE (DECWRL) 50 * from: Header: /sprite/src/kernel/mach/ds3100.md/RCS/machAddrs.h, 51 * v 1.2 89/08/15 18:28:21 rab Exp SPRITE (DECWRL) 52 * from: Header: /sprite/src/kernel/vm/ds3100.md/RCS/vmPmaxConst.h, 53 * v 9.1 89/09/18 17:33:00 shirriff Exp SPRITE (DECWRL) 54 */ 55 56 #ifndef _MIPS_CPUREGS_H_ 57 #define _MIPS_CPUREGS_H_ 58 59 #include <sys/cdefs.h> /* For __CONCAT() */ 60 61 #if defined(_KERNEL_OPT) 62 #include "opt_cputype.h" 63 #endif 64 65 /* 66 * Address space. 67 * 32-bit mips CPUS partition their 32-bit address space into four segments: 68 * 69 * kuseg 0x00000000 - 0x7fffffff User virtual mem, mapped 70 * kseg0 0x80000000 - 0x9fffffff Physical memory, cached, unmapped 71 * kseg1 0xa0000000 - 0xbfffffff Physical memory, uncached, unmapped 72 * kseg2 0xc0000000 - 0xffffffff kernel-virtual, mapped 73 * 74 * mips1 physical memory is limited to 512Mbytes, which is 75 * doubly mapped in kseg0 (cached) and kseg1 (uncached.) 76 * Caching of mapped addresses is controlled by bits in the TLB entry. 77 */ 78 79 #ifdef _LP64 80 #define MIPS_XUSEG_START (0L << 62) 81 #define MIPS_XUSEG_P(x) (((uint64_t)(x) >> 62) == 0) 82 #define MIPS_USEG_P(x) ((uintptr_t)(x) < 0x80000000L) 83 #define MIPS_XSSEG_START (1L << 62) 84 #define MIPS_XSSEG_P(x) (((uint64_t)(x) >> 62) == 1) 85 #endif 86 87 /* 88 * MIPS addresses are signed and we defining as negative so that 89 * in LP64 kern they get sign-extended correctly. 90 */ 91 #ifndef _LOCORE 92 #define MIPS_KSEG0_START (-0x7fffffffL-1) /* 0x80000000 */ 93 #define MIPS_KSEG1_START -0x60000000L /* 0xa0000000 */ 94 #define MIPS_KSEG2_START -0x40000000L /* 0xc0000000 */ 95 #define MIPS_MAX_MEM_ADDR -0x42000000L /* 0xbe000000 */ 96 #define MIPS_RESERVED_ADDR -0x40380000L /* 0xbfc80000 */ 97 #endif 98 99 #define MIPS_PHYS_MASK 0x1fffffff 100 101 #define MIPS_KSEG0_TO_PHYS(x) ((uintptr_t)(x) & MIPS_PHYS_MASK) 102 #define MIPS_PHYS_TO_KSEG0(x) ((uintptr_t)(x) | (intptr_t)MIPS_KSEG0_START) 103 #define MIPS_KSEG1_TO_PHYS(x) ((uintptr_t)(x) & MIPS_PHYS_MASK) 104 #define MIPS_PHYS_TO_KSEG1(x) ((uintptr_t)(x) | (intptr_t)MIPS_KSEG1_START) 105 106 #define MIPS_KSEG0_P(x) (((intptr_t)(x) & ~MIPS_PHYS_MASK) == MIPS_KSEG0_START) 107 #define MIPS_KSEG1_P(x) (((intptr_t)(x) & ~MIPS_PHYS_MASK) == MIPS_KSEG1_START) 108 #define MIPS_KSEG2_P(x) ((uintptr_t)MIPS_KSEG2_START <= (uintptr_t)(x)) 109 110 /* Map virtual address to index in mips3 r4k virtually-indexed cache */ 111 #define MIPS3_VA_TO_CINDEX(x) \ 112 (((intptr_t)(x) & 0xffffff) | MIPS_KSEG0_START) 113 114 #ifndef _LOCORE 115 #define MIPS_XSEG_MASK (0x3fffffffffffffffLL) 116 #define MIPS_XKSEG_START (0x3ULL << 62) 117 #define MIPS_XKSEG_P(x) (((uint64_t)(x) >> 62) == 3) 118 119 #define MIPS_XKPHYS_START (0x2ULL << 62) 120 #define MIPS_PHYS_TO_XKPHYS_UNCACHED(x) \ 121 (MIPS_XKPHYS_START | ((uint64_t)(CCA_UNCACHED) << 59) | (x)) 122 #define MIPS_PHYS_TO_XKPHYS_CACHED(x) \ 123 (mips_options.mips3_xkphys_cached | (x)) 124 #define MIPS_PHYS_TO_XKPHYS(cca,x) \ 125 (MIPS_XKPHYS_START | ((uint64_t)(cca) << 59) | (x)) 126 #define MIPS_XKPHYS_TO_PHYS(x) ((uint64_t)(x) & 0x07ffffffffffffffLL) 127 #define MIPS_XKPHYS_TO_CCA(x) (((uint64_t)(x) >> 59) & 7) 128 #define MIPS_XKPHYS_P(x) (((uint64_t)(x) >> 62) == 2) 129 #endif /* _LOCORE */ 130 131 #define CCA_UNCACHED 2 132 #define CCA_CACHEABLE 3 /* cacheable non-coherent */ 133 134 /* CPU dependent mtc0 hazard hook */ 135 #if (MIPS32R2 + MIPS64R2 + MIPS64R2_RMIXL) > 0 136 # if (MIPS1 + MIPS3 + MIPS32 + MIPS64 + MIPS64_RMIXL) == 0 137 # define COP0_SYNC sll $0,$0,3 /* EHB */ 138 # define JR_HB_RA .set push; .set mips32r2; jr.hb ra; nop; .set pop 139 # else 140 # define COP0_SYNC sll $0,$0,1; sll $0,$0,1; sll $0,$0,3 141 # define JR_HB_RA sll $0,$0,1; sll $0,$0,1; jr ra; sll $0,$0,3 142 # endif 143 #elif (MIPS32 + MIPS64 + MIPS64_RMIXL) > 0 144 # define COP0_SYNC sll $0,$0,1; sll $0,$0,1; sll $0,$0,1 145 # define JR_HB_RA sll $0,$0,1; sll $0,$0,1; jr ra; sll $0,$0,1 146 #elif MIPS3 > 0 147 # define COP0_SYNC nop; nop; nop 148 # define JR_HB_RA nop; nop; jr ra; nop 149 #else 150 # define COP0_SYNC nop 151 # define JR_HB_RA jr ra; nop 152 #endif 153 #define COP0_HAZARD_FPUENABLE nop; nop; nop; nop; 154 155 /* 156 * The bits in the cause register. 157 * 158 * Bits common to r3000 and r4000: 159 * 160 * MIPS_CR_BR_DELAY Exception happened in branch delay slot. 161 * MIPS_CR_COP_ERR Coprocessor error. 162 * MIPS_CR_IP Interrupt pending bits defined below. 163 * (same meaning as in CAUSE register). 164 * MIPS_CR_EXC_CODE The exception type (see exception codes below). 165 * 166 * Differences: 167 * r3k has 4 bits of exception type, r4k has 5 bits. 168 */ 169 #define MIPS_CR_BR_DELAY 0x80000000 170 #define MIPS_CR_COP_ERR 0x30000000 171 #define MIPS1_CR_EXC_CODE 0x0000003C /* four bits */ 172 #define MIPS3_CR_EXC_CODE 0x0000007C /* five bits */ 173 #define MIPS_CR_IP 0x0000FF00 174 #define MIPS_CR_EXC_CODE_SHIFT 2 175 176 /* 177 * The bits in the status register. All bits are active when set to 1. 178 * 179 * R3000 status register fields: 180 * MIPS_SR_COP_USABILITY Control the usability of the four coprocessors. 181 * MIPS_SR_TS TLB shutdown. 182 * 183 * MIPS_SR_INT_IE Master (current) interrupt enable bit. 184 * 185 * Differences: 186 * r3k has cache control is via frobbing SR register bits, whereas the 187 * r4k cache control is via explicit instructions. 188 * r3k has a 3-entry stack of kernel/user bits, whereas the 189 * r4k has kernel/supervisor/user. 190 */ 191 #define MIPS_SR_COP_USABILITY 0xf0000000 192 #define MIPS_SR_COP_0_BIT 0x10000000 193 #define MIPS_SR_COP_1_BIT 0x20000000 194 #define MIPS_SR_COP_2_BIT 0x40000000 195 196 /* r4k and r3k differences, see below */ 197 198 #define MIPS_SR_MX 0x01000000 /* MIPS64 */ 199 #define MIPS_SR_PX 0x00800000 /* MIPS64 */ 200 #define MIPS_SR_BEV 0x00400000 /* Use boot exception vector */ 201 #define MIPS_SR_TS 0x00200000 202 203 /* r4k and r3k differences, see below */ 204 205 #define MIPS_SR_INT_IE 0x00000001 206 /*#define MIPS_SR_MBZ 0x0f8000c0*/ /* Never used, true for r3k */ 207 /*#define MIPS_SR_INT_MASK 0x0000ff00*/ 208 209 210 /* 211 * The R2000/R3000-specific status register bit definitions. 212 * all bits are active when set to 1. 213 * 214 * MIPS_SR_PARITY_ERR Parity error. 215 * MIPS_SR_CACHE_MISS Most recent D-cache load resulted in a miss. 216 * MIPS_SR_PARITY_ZERO Zero replaces outgoing parity bits. 217 * MIPS_SR_SWAP_CACHES Swap I-cache and D-cache. 218 * MIPS_SR_ISOL_CACHES Isolate D-cache from main memory. 219 * Interrupt enable bits defined below. 220 * MIPS_SR_KU_OLD Old kernel/user mode bit. 1 => user mode. 221 * MIPS_SR_INT_ENA_OLD Old interrupt enable bit. 222 * MIPS_SR_KU_PREV Previous kernel/user mode bit. 1 => user mode. 223 * MIPS_SR_INT_ENA_PREV Previous interrupt enable bit. 224 * MIPS_SR_KU_CUR Current kernel/user mode bit. 1 => user mode. 225 */ 226 227 #define MIPS1_PARITY_ERR 0x00100000 228 #define MIPS1_CACHE_MISS 0x00080000 229 #define MIPS1_PARITY_ZERO 0x00040000 230 #define MIPS1_SWAP_CACHES 0x00020000 231 #define MIPS1_ISOL_CACHES 0x00010000 232 233 #define MIPS1_SR_KU_OLD 0x00000020 /* 2nd stacked KU/IE*/ 234 #define MIPS1_SR_INT_ENA_OLD 0x00000010 /* 2nd stacked KU/IE*/ 235 #define MIPS1_SR_KU_PREV 0x00000008 /* 1st stacked KU/IE*/ 236 #define MIPS1_SR_INT_ENA_PREV 0x00000004 /* 1st stacked KU/IE*/ 237 #define MIPS1_SR_KU_CUR 0x00000002 /* current KU */ 238 239 /* backwards compatibility */ 240 #define MIPS_SR_PARITY_ERR MIPS1_PARITY_ERR 241 #define MIPS_SR_CACHE_MISS MIPS1_CACHE_MISS 242 #define MIPS_SR_PARITY_ZERO MIPS1_PARITY_ZERO 243 #define MIPS_SR_SWAP_CACHES MIPS1_SWAP_CACHES 244 #define MIPS_SR_ISOL_CACHES MIPS1_ISOL_CACHES 245 246 #define MIPS_SR_KU_OLD MIPS1_SR_KU_OLD 247 #define MIPS_SR_INT_ENA_OLD MIPS1_SR_INT_ENA_OLD 248 #define MIPS_SR_KU_PREV MIPS1_SR_KU_PREV 249 #define MIPS_SR_KU_CUR MIPS1_SR_KU_CUR 250 #define MIPS_SR_INT_ENA_PREV MIPS1_SR_INT_ENA_PREV 251 252 /* 253 * R4000 status register bit definitons, 254 * where different from r2000/r3000. 255 */ 256 #define MIPS3_SR_XX 0x80000000 257 #define MIPS3_SR_RP 0x08000000 258 #define MIPS3_SR_FR 0x04000000 259 #define MIPS3_SR_RE 0x02000000 260 261 #define MIPS3_SR_DIAG_DL 0x01000000 /* QED 52xx */ 262 #define MIPS3_SR_DIAG_IL 0x00800000 /* QED 52xx */ 263 #define MIPS3_SR_PX 0x00800000 /* MIPS64 */ 264 #define MIPS3_SR_SR 0x00100000 265 #define MIPS3_SR_NMI 0x00080000 /* MIPS32/64 */ 266 #define MIPS3_SR_DIAG_CH 0x00040000 267 #define MIPS3_SR_DIAG_CE 0x00020000 268 #define MIPS3_SR_DIAG_PE 0x00010000 269 #define MIPS3_SR_KX 0x00000080 270 #define MIPS3_SR_SX 0x00000040 271 #define MIPS3_SR_UX 0x00000020 272 #define MIPS3_SR_KSU_MASK 0x00000018 273 #define MIPS3_SR_KSU_USER 0x00000010 274 #define MIPS3_SR_KSU_SUPER 0x00000008 275 #define MIPS3_SR_KSU_KERNEL 0x00000000 276 #define MIPS3_SR_ERL 0x00000004 277 #define MIPS3_SR_EXL 0x00000002 278 279 #define MIPS_SR_SOFT_RESET MIPS3_SR_SOFT_RESET 280 #define MIPS_SR_DIAG_CH MIPS3_SR_DIAG_CH 281 #define MIPS_SR_DIAG_CE MIPS3_SR_DIAG_CE 282 #define MIPS_SR_DIAG_PE MIPS3_SR_DIAG_PE 283 #define MIPS_SR_KX MIPS3_SR_KX 284 #define MIPS_SR_SX MIPS3_SR_SX 285 #define MIPS_SR_UX MIPS3_SR_UX 286 287 #define MIPS_SR_KSU_MASK MIPS3_SR_KSU_MASK 288 #define MIPS_SR_KSU_USER MIPS3_SR_KSU_USER 289 #define MIPS_SR_KSU_SUPER MIPS3_SR_KSU_SUPER 290 #define MIPS_SR_KSU_KERNEL MIPS3_SR_KSU_KERNEL 291 #define MIPS_SR_ERL MIPS3_SR_ERL 292 #define MIPS_SR_EXL MIPS3_SR_EXL 293 294 295 /* 296 * The interrupt masks. 297 * If a bit in the mask is 1 then the interrupt is enabled (or pending). 298 */ 299 #define MIPS_INT_MASK 0xff00 300 #define MIPS_INT_MASK_5 0x8000 301 #define MIPS_INT_MASK_4 0x4000 302 #define MIPS_INT_MASK_3 0x2000 303 #define MIPS_INT_MASK_2 0x1000 304 #define MIPS_INT_MASK_1 0x0800 305 #define MIPS_INT_MASK_0 0x0400 306 #define MIPS_HARD_INT_MASK 0xfc00 307 #define MIPS_SOFT_INT_MASK_1 0x0200 308 #define MIPS_SOFT_INT_MASK_0 0x0100 309 #define MIPS_SOFT_INT_MASK 0x0300 310 #define MIPS_INT_MASK_SHIFT 8 311 312 /* 313 * mips3 CPUs have on-chip timer at INT_MASK_5. Each platform can 314 * choose to enable this interrupt. 315 */ 316 #if defined(MIPS3_ENABLE_CLOCK_INTR) 317 #define MIPS3_INT_MASK MIPS_INT_MASK 318 #define MIPS3_HARD_INT_MASK MIPS_HARD_INT_MASK 319 #else 320 #define MIPS3_INT_MASK (MIPS_INT_MASK & ~MIPS_INT_MASK_5) 321 #define MIPS3_HARD_INT_MASK (MIPS_HARD_INT_MASK & ~MIPS_INT_MASK_5) 322 #endif 323 324 /* 325 * The bits in the context register. 326 */ 327 #define MIPS1_CNTXT_PTE_BASE 0xFFE00000 328 #define MIPS1_CNTXT_BAD_VPN 0x001FFFFC 329 330 #define MIPS3_CNTXT_PTE_BASE 0xFF800000 331 #define MIPS3_CNTXT_BAD_VPN2 0x007FFFF0 332 333 /* 334 * The bits in the MIPS3 config register. 335 * 336 * bit 0..5: R/W, Bit 6..31: R/O 337 */ 338 339 /* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */ 340 #define MIPS3_CONFIG_K0_MASK 0x00000007 341 342 /* 343 * R/W Update on Store Conditional 344 * 0: Store Conditional uses coherency algorithm specified by TLB 345 * 1: Store Conditional uses cacheable coherent update on write 346 */ 347 #define MIPS3_CONFIG_CU 0x00000008 348 349 #define MIPS3_CONFIG_DB 0x00000010 /* Primary D-cache line size */ 350 #define MIPS3_CONFIG_IB 0x00000020 /* Primary I-cache line size */ 351 #define MIPS3_CONFIG_CACHE_L1_LSIZE(config, bit) \ 352 (((config) & (bit)) ? 32 : 16) 353 354 #define MIPS3_CONFIG_DC_MASK 0x000001c0 /* Primary D-cache size */ 355 #define MIPS3_CONFIG_DC_SHIFT 6 356 #define MIPS3_CONFIG_IC_MASK 0x00000e00 /* Primary I-cache size */ 357 #define MIPS3_CONFIG_IC_SHIFT 9 358 #define MIPS3_CONFIG_C_DEFBASE 0x1000 /* default base 2^12 */ 359 360 /* Cache size mode indication: available only on Vr41xx CPUs */ 361 #define MIPS3_CONFIG_CS 0x00001000 362 #define MIPS3_CONFIG_C_4100BASE 0x0400 /* base is 2^10 if CS=1 */ 363 #define MIPS3_CONFIG_CACHE_SIZE(config, mask, base, shift) \ 364 ((base) << (((config) & (mask)) >> (shift))) 365 366 /* External cache enable: Controls L2 for R5000/Rm527x and L3 for Rm7000 */ 367 #define MIPS3_CONFIG_SE 0x00001000 368 369 /* Block ordering: 0: sequential, 1: sub-block */ 370 #define MIPS3_CONFIG_EB 0x00002000 371 372 /* ECC mode - 0: ECC mode, 1: parity mode */ 373 #define MIPS3_CONFIG_EM 0x00004000 374 375 /* BigEndianMem - 0: kernel and memory are little endian, 1: big endian */ 376 #define MIPS3_CONFIG_BE 0x00008000 377 378 /* Dirty Shared coherency state - 0: enabled, 1: disabled */ 379 #define MIPS3_CONFIG_SM 0x00010000 380 381 /* Secondary Cache - 0: present, 1: not present */ 382 #define MIPS3_CONFIG_SC 0x00020000 383 384 /* System Port width - 0: 64-bit, 1: 32-bit (QED RM523x), 2,3: reserved */ 385 #define MIPS3_CONFIG_EW_MASK 0x000c0000 386 #define MIPS3_CONFIG_EW_SHIFT 18 387 388 /* Secondary Cache port width - 0: 128-bit data path to S-cache, 1: reserved */ 389 #define MIPS3_CONFIG_SW 0x00100000 390 391 /* Split Secondary Cache Mode - 0: I/D mixed, 1: I/D separated by SCAddr(17) */ 392 #define MIPS3_CONFIG_SS 0x00200000 393 394 /* Secondary Cache line size */ 395 #define MIPS3_CONFIG_SB_MASK 0x00c00000 396 #define MIPS3_CONFIG_SB_SHIFT 22 397 #define MIPS3_CONFIG_CACHE_L2_LSIZE(config) \ 398 (0x10 << (((config) & MIPS3_CONFIG_SB_MASK) >> MIPS3_CONFIG_SB_SHIFT)) 399 400 /* Write back data rate */ 401 #define MIPS3_CONFIG_EP_MASK 0x0f000000 402 #define MIPS3_CONFIG_EP_SHIFT 24 403 404 /* System clock ratio - this value is CPU dependent */ 405 #define MIPS3_CONFIG_EC_MASK 0x70000000 406 #define MIPS3_CONFIG_EC_SHIFT 28 407 408 /* Master-Checker Mode - 1: enabled */ 409 #define MIPS3_CONFIG_CM 0x80000000 410 411 /* 412 * The bits in the MIPS4 config register. 413 */ 414 415 /* kseg0 coherency algorithm - see MIPS3_TLB_ATTR values */ 416 #define MIPS4_CONFIG_K0_MASK MIPS3_CONFIG_K0_MASK 417 #define MIPS4_CONFIG_DN_MASK 0x00000018 /* Device number */ 418 #define MIPS4_CONFIG_CT 0x00000020 /* CohPrcReqTar */ 419 #define MIPS4_CONFIG_PE 0x00000040 /* PreElmReq */ 420 #define MIPS4_CONFIG_PM_MASK 0x00000180 /* PreReqMax */ 421 #define MIPS4_CONFIG_EC_MASK 0x00001e00 /* SysClkDiv */ 422 #define MIPS4_CONFIG_SB 0x00002000 /* SCBlkSize */ 423 #define MIPS4_CONFIG_SK 0x00004000 /* SCColEn */ 424 #define MIPS4_CONFIG_BE 0x00008000 /* MemEnd */ 425 #define MIPS4_CONFIG_SS_MASK 0x00070000 /* SCSize */ 426 #define MIPS4_CONFIG_SC_MASK 0x00380000 /* SCClkDiv */ 427 #define MIPS4_CONFIG_RESERVED 0x03c00000 /* Reserved wired 0 */ 428 #define MIPS4_CONFIG_DC_MASK 0x1c000000 /* Primary D-Cache size */ 429 #define MIPS4_CONFIG_IC_MASK 0xe0000000 /* Primary I-Cache size */ 430 431 #define MIPS4_CONFIG_DC_SHIFT 26 432 #define MIPS4_CONFIG_IC_SHIFT 29 433 434 #define MIPS4_CONFIG_CACHE_SIZE(config, mask, base, shift) \ 435 ((base) << (((config) & (mask)) >> (shift))) 436 437 #define MIPS4_CONFIG_CACHE_L2_LSIZE(config) \ 438 (((config) & MIPS4_CONFIG_SB) ? 128 : 64) 439 440 /* 441 * Location of exception vectors. 442 * 443 * Common vectors: reset and UTLB miss. 444 */ 445 #define MIPS_RESET_EXC_VEC MIPS_PHYS_TO_KSEG1(0x1FC00000) 446 #define MIPS_UTLB_MISS_EXC_VEC MIPS_PHYS_TO_KSEG0(0) 447 448 /* 449 * MIPS-1 general exception vector (everything else) 450 */ 451 #define MIPS1_GEN_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0080) 452 453 /* 454 * MIPS-III exception vectors 455 */ 456 #define MIPS3_XTLB_MISS_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0080) 457 #define MIPS3_CACHE_ERR_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0100) 458 #define MIPS3_GEN_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0180) 459 460 /* 461 * MIPS32/MIPS64 (and some MIPS3) dedicated interrupt vector. 462 */ 463 #define MIPS3_INTR_EXC_VEC MIPS_PHYS_TO_KSEG0(0x0200) 464 465 /* 466 * Coprocessor 0 registers: 467 * 468 * v--- width for mips I,III,32,64 469 * (3=32bit, 6=64bit, i=impl dep) 470 * 0 MIPS_COP_0_TLB_INDEX 3333 TLB Index. 471 * 1 MIPS_COP_0_TLB_RANDOM 3333 TLB Random. 472 * 2 MIPS_COP_0_TLB_LOW 3... r3k TLB entry low. 473 * 2 MIPS_COP_0_TLB_LO0 .636 r4k TLB entry low. 474 * 3 MIPS_COP_0_TLB_LO1 .636 r4k TLB entry low, extended. 475 * 4 MIPS_COP_0_TLB_CONTEXT 3636 TLB Context. 476 * 4/2 MIPS_COP_0_USERLOCAL ..36 UserLocal. 477 * 5 MIPS_COP_0_TLB_PG_MASK .333 TLB Page Mask register. 478 * 6 MIPS_COP_0_TLB_WIRED .333 Wired TLB number. 479 * 7 MIPS_COP_0_HWRENA ..33 rdHWR Enable. 480 * 8 MIPS_COP_0_BAD_VADDR 3636 Bad virtual address. 481 * 9 MIPS_COP_0_COUNT .333 Count register. 482 * 10 MIPS_COP_0_TLB_HI 3636 TLB entry high. 483 * 11 MIPS_COP_0_COMPARE .333 Compare (against Count). 484 * 12 MIPS_COP_0_STATUS 3333 Status register. 485 * 12/1 MIPS_COP_0_INTCTL ..33 Interrupt Control. 486 * 12/2 MIPS_COP_0_SRSCTL ..33 Shadow Register Set Selectors. 487 * 12/3 MIPS_COP_0_SRSMAP ..33 Shadow Set Map. 488 * 13 MIPS_COP_0_CAUSE 3333 Exception cause register. 489 * 14 MIPS_COP_0_EXC_PC 3636 Exception PC. 490 * 15 MIPS_COP_0_PRID 3333 Processor revision identifier. 491 * 15/1 MIPS_COP_0_EBASE ..33 Exception Base. 492 * 16 MIPS_COP_0_CONFIG 3333 Configuration register. 493 * 16/1 MIPS_COP_0_CONFIG1 ..33 Configuration register 1. 494 * 16/2 MIPS_COP_0_CONFIG2 ..33 Configuration register 2. 495 * 16/3 MIPS_COP_0_CONFIG3 ..33 Configuration register 3. 496 * 16/6 MIPS_COP_0_CONFIG6 ..33 Configuration register 6. 497 * 16/7 MIPS_COP_0_CONFIG7 ..33 Configuration register 7. 498 * 17 MIPS_COP_0_LLADDR .336 Load Linked Address. 499 * 18 MIPS_COP_0_WATCH_LO .336 WatchLo register. 500 * 19 MIPS_COP_0_WATCH_HI .333 WatchHi register. 501 * 20 MIPS_COP_0_TLB_XCONTEXT .6.6 TLB XContext register. 502 * 22 MIPS_COP_0_OSSCRATCH ...6 [RMI] OS Scratch register. (select 0..7) 503 * 23 MIPS_COP_0_DEBUG .... Debug JTAG register. 504 * 24 MIPS_COP_0_DEPC .... DEPC JTAG register. 505 * 25 MIPS_COP_0_PERFCNT ..36 Performance Counter register. 506 * 26 MIPS_COP_0_ECC .3ii ECC / Error Control register. 507 * 27 MIPS_COP_0_CACHE_ERR .3ii Cache Error register. 508 * 28/0 MIPS_COP_0_TAG_LO .3ii Cache TagLo register (instr). 509 * 28/1 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (instr). 510 * 28/2 MIPS_COP_0_TAG_LO ..ii Cache TagLo register (data). 511 * 28/3 MIPS_COP_0_DATA_LO ..ii Cache DataLo register (data). 512 * 29/0 MIPS_COP_0_TAG_HI .3ii Cache TagHi register (instr). 513 * 29/1 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (instr). 514 * 29/2 MIPS_COP_0_TAG_HI ..ii Cache TagHi register (data). 515 * 29/3 MIPS_COP_0_DATA_HI ..ii Cache DataHi register (data). 516 * 30 MIPS_COP_0_ERROR_PC .636 Error EPC register. 517 * 31 MIPS_COP_0_DESAVE .... DESAVE JTAG register. 518 */ 519 #ifdef _LOCORE 520 #define _(n) __CONCAT($,n) 521 #else 522 #define _(n) n 523 #endif 524 #define MIPS_COP_0_TLB_INDEX _(0) 525 #define MIPS_COP_0_TLB_RANDOM _(1) 526 /* Name and meaning of TLB bits for $2 differ on r3k and r4k. */ 527 528 #define MIPS_COP_0_TLB_CONTEXT _(4) 529 /* $5 and $6 new with MIPS-III */ 530 #define MIPS_COP_0_BAD_VADDR _(8) 531 #define MIPS_COP_0_TLB_HI _(10) 532 #define MIPS_COP_0_STATUS _(12) 533 #define MIPS_COP_0_CAUSE _(13) 534 #define MIPS_COP_0_EXC_PC _(14) 535 #define MIPS_COP_0_PRID _(15) 536 537 538 /* MIPS-I */ 539 #define MIPS_COP_0_TLB_LOW _(2) 540 541 /* MIPS-III */ 542 #define MIPS_COP_0_TLB_LO0 _(2) 543 #define MIPS_COP_0_TLB_LO1 _(3) 544 545 #define MIPS_COP_0_TLB_PG_MASK _(5) 546 #define MIPS_COP_0_TLB_WIRED _(6) 547 548 #define MIPS_COP_0_COUNT _(9) 549 #define MIPS_COP_0_COMPARE _(11) 550 551 #define MIPS_COP_0_CONFIG _(16) 552 #define MIPS_COP_0_LLADDR _(17) 553 #define MIPS_COP_0_WATCH_LO _(18) 554 #define MIPS_COP_0_WATCH_HI _(19) 555 #define MIPS_COP_0_TLB_XCONTEXT _(20) 556 #define MIPS_COP_0_ECC _(26) 557 #define MIPS_COP_0_CACHE_ERR _(27) 558 #define MIPS_COP_0_TAG_LO _(28) 559 #define MIPS_COP_0_TAG_HI _(29) 560 #define MIPS_COP_0_ERROR_PC _(30) 561 562 /* MIPS32/64 */ 563 #define MIPS_COP_0_HWRENA _(7) 564 #define MIPS_COP_0_OSSCRATCH _(22) 565 #define MIPS_COP_0_DEBUG _(23) 566 #define MIPS_COP_0_DEPC _(24) 567 #define MIPS_COP_0_PERFCNT _(25) 568 #define MIPS_COP_0_DATA_LO _(28) 569 #define MIPS_COP_0_DATA_HI _(29) 570 #define MIPS_COP_0_DESAVE _(31) 571 572 /* 573 * Values for the code field in a break instruction. 574 */ 575 #define MIPS_BREAK_INSTR 0x0000000d 576 #define MIPS_BREAK_VAL_MASK 0x03ff0000 577 #define MIPS_BREAK_VAL_SHIFT 16 578 #define MIPS_BREAK_KDB_VAL 512 579 #define MIPS_BREAK_SSTEP_VAL 513 580 #define MIPS_BREAK_BRKPT_VAL 514 581 #define MIPS_BREAK_SOVER_VAL 515 582 #define MIPS_BREAK_KDB (MIPS_BREAK_INSTR | \ 583 (MIPS_BREAK_KDB_VAL << MIPS_BREAK_VAL_SHIFT)) 584 #define MIPS_BREAK_SSTEP (MIPS_BREAK_INSTR | \ 585 (MIPS_BREAK_SSTEP_VAL << MIPS_BREAK_VAL_SHIFT)) 586 #define MIPS_BREAK_BRKPT (MIPS_BREAK_INSTR | \ 587 (MIPS_BREAK_BRKPT_VAL << MIPS_BREAK_VAL_SHIFT)) 588 #define MIPS_BREAK_SOVER (MIPS_BREAK_INSTR | \ 589 (MIPS_BREAK_SOVER_VAL << MIPS_BREAK_VAL_SHIFT)) 590 591 /* 592 * Mininum and maximum cache sizes. 593 */ 594 #define MIPS_MIN_CACHE_SIZE (16 * 1024) 595 #define MIPS_MAX_CACHE_SIZE (256 * 1024) 596 #define MIPS3_MAX_PCACHE_SIZE (32 * 1024) /* max. primary cache size */ 597 598 /* 599 * The floating point version and status registers. 600 */ 601 #define MIPS_FPU_ID $0 602 #define MIPS_FPU_CSR $31 603 604 /* 605 * The floating point coprocessor status register bits. 606 */ 607 #define MIPS_FPU_ROUNDING_BITS 0x00000003 608 #define MIPS_FPU_ROUND_RN 0x00000000 609 #define MIPS_FPU_ROUND_RZ 0x00000001 610 #define MIPS_FPU_ROUND_RP 0x00000002 611 #define MIPS_FPU_ROUND_RM 0x00000003 612 #define MIPS_FPU_STICKY_BITS 0x0000007c 613 #define MIPS_FPU_STICKY_INEXACT 0x00000004 614 #define MIPS_FPU_STICKY_UNDERFLOW 0x00000008 615 #define MIPS_FPU_STICKY_OVERFLOW 0x00000010 616 #define MIPS_FPU_STICKY_DIV0 0x00000020 617 #define MIPS_FPU_STICKY_INVALID 0x00000040 618 #define MIPS_FPU_ENABLE_BITS 0x00000f80 619 #define MIPS_FPU_ENABLE_INEXACT 0x00000080 620 #define MIPS_FPU_ENABLE_UNDERFLOW 0x00000100 621 #define MIPS_FPU_ENABLE_OVERFLOW 0x00000200 622 #define MIPS_FPU_ENABLE_DIV0 0x00000400 623 #define MIPS_FPU_ENABLE_INVALID 0x00000800 624 #define MIPS_FPU_EXCEPTION_BITS 0x0003f000 625 #define MIPS_FPU_EXCEPTION_INEXACT 0x00001000 626 #define MIPS_FPU_EXCEPTION_UNDERFLOW 0x00002000 627 #define MIPS_FPU_EXCEPTION_OVERFLOW 0x00004000 628 #define MIPS_FPU_EXCEPTION_DIV0 0x00008000 629 #define MIPS_FPU_EXCEPTION_INVALID 0x00010000 630 #define MIPS_FPU_EXCEPTION_UNIMPL 0x00020000 631 #define MIPS_FPU_COND_BIT 0x00800000 632 #define MIPS_FPU_FLUSH_BIT 0x01000000 /* r4k, MBZ on r3k */ 633 #define MIPS1_FPC_MBZ_BITS 0xff7c0000 634 #define MIPS3_FPC_MBZ_BITS 0xfe7c0000 635 636 637 /* 638 * Constants to determine if have a floating point instruction. 639 */ 640 #define MIPS_OPCODE_SHIFT 26 641 #define MIPS_OPCODE_C1 0x11 642 643 644 /* 645 * The low part of the TLB entry. 646 */ 647 #define MIPS1_TLB_PFN 0xfffff000 648 #define MIPS1_TLB_NON_CACHEABLE_BIT 0x00000800 649 #define MIPS1_TLB_DIRTY_BIT 0x00000400 650 #define MIPS1_TLB_VALID_BIT 0x00000200 651 #define MIPS1_TLB_GLOBAL_BIT 0x00000100 652 653 #define MIPS3_TLB_PFN 0x3fffffc0 654 #define MIPS3_TLB_ATTR_MASK 0x00000038 655 #define MIPS3_TLB_ATTR_SHIFT 3 656 #define MIPS3_TLB_DIRTY_BIT 0x00000004 657 #define MIPS3_TLB_VALID_BIT 0x00000002 658 #define MIPS3_TLB_GLOBAL_BIT 0x00000001 659 660 #define MIPS1_TLB_PHYS_PAGE_SHIFT 12 661 #define MIPS3_TLB_PHYS_PAGE_SHIFT 6 662 #define MIPS1_TLB_PF_NUM MIPS1_TLB_PFN 663 #define MIPS3_TLB_PF_NUM MIPS3_TLB_PFN 664 #define MIPS1_TLB_MOD_BIT MIPS1_TLB_DIRTY_BIT 665 #define MIPS3_TLB_MOD_BIT MIPS3_TLB_DIRTY_BIT 666 667 /* 668 * MIPS3_TLB_ATTR (CCA) values - coherency algorithm: 669 * 0: cacheable, noncoherent, write-through, no write allocate 670 * 1: cacheable, noncoherent, write-through, write allocate 671 * 2: uncached 672 * 3: cacheable, noncoherent, write-back (noncoherent) 673 * 4: cacheable, coherent, write-back, exclusive (exclusive) 674 * 5: cacheable, coherent, write-back, exclusive on write (sharable) 675 * 6: cacheable, coherent, write-back, update on write (update) 676 * 7: uncached, accelerated (gather STORE operations) 677 */ 678 #define MIPS3_TLB_ATTR_WT 0 /* IDT */ 679 #define MIPS3_TLB_ATTR_WT_WRITEALLOCATE 1 /* IDT */ 680 #define MIPS3_TLB_ATTR_UNCACHED 2 /* R4000/R4400, IDT */ 681 #define MIPS3_TLB_ATTR_WB_NONCOHERENT 3 /* R4000/R4400, IDT */ 682 #define MIPS3_TLB_ATTR_WB_EXCLUSIVE 4 /* R4000/R4400 */ 683 #define MIPS3_TLB_ATTR_WB_SHARABLE 5 /* R4000/R4400 */ 684 #define MIPS3_TLB_ATTR_WB_UPDATE 6 /* R4000/R4400 */ 685 #define MIPS4_TLB_ATTR_UNCACHED_ACCELERATED 7 /* R10000 */ 686 687 688 /* 689 * The high part of the TLB entry. 690 */ 691 #define MIPS1_TLB_VPN 0xfffff000 692 #define MIPS1_TLB_PID 0x00000fc0 693 #define MIPS1_TLB_PID_SHIFT 6 694 695 #define MIPS3_TLB_VPN2 0xffffe000 696 #define MIPS3_TLB_ASID 0x000003ff 697 698 #define MIPS1_TLB_VIRT_PAGE_NUM MIPS1_TLB_VPN 699 #define MIPS3_TLB_VIRT_PAGE_NUM MIPS3_TLB_VPN2 700 #define MIPS3_TLB_PID MIPS3_TLB_ASID 701 #define MIPS_TLB_VIRT_PAGE_SHIFT 12 702 703 /* 704 * r3000: shift count to put the index in the right spot. 705 */ 706 #define MIPS1_TLB_INDEX_SHIFT 8 707 708 /* 709 * The first TLB that write random hits. 710 */ 711 #define MIPS1_TLB_FIRST_RAND_ENTRY 8 712 #define MIPS3_TLB_WIRED_UPAGES 1 713 714 /* 715 * The number of process id entries. 716 */ 717 #define MIPS1_TLB_NUM_PIDS 64 718 #define MIPS3_TLB_NUM_ASIDS 256 719 720 /* 721 * Patch codes to hide CPU design differences between MIPS1 and MIPS3. 722 */ 723 724 /* XXX simonb: this is before MIPS3_PLUS is defined (and is ugly!) */ 725 726 #if (MIPS3 + MIPS4 + MIPS32 + MIPS32R2 + MIPS64 + MIPS64R2 + MIPS64_RMIXL + MIPS64R2_RMIXL) == 0 && MIPS1 != 0 727 #define MIPS_TLB_PID_SHIFT MIPS1_TLB_PID_SHIFT 728 #define MIPS_TLB_PID MIPS1_TLB_PID 729 #define MIPS_TLB_NUM_PIDS MIPS1_TLB_NUM_PIDS 730 #endif 731 732 #if (MIPS3 + MIPS4 + MIPS32 + MIPS32R2 + MIPS64 + MIPS64R2 + MIPS64_RMIXL + MIPS64R2_RMIXL) != 0 && MIPS1 == 0 733 #define MIPS_TLB_PID_SHIFT 0 734 #define MIPS_TLB_PID MIPS3_TLB_PID 735 #if (MIPS3 + MIPS4) != 0 736 #define MIPS_TLB_NUM_PIDS MIPS3_TLB_NUM_ASIDS 737 #else 738 #define MIPS_TLB_NUM_PIDS mips_options.mips_num_tlb_asids 739 #endif 740 #endif 741 742 743 #if !defined(MIPS_TLB_PID_SHIFT) 744 #define MIPS_TLB_PID_SHIFT \ 745 ((MIPS_HAS_R4K_MMU) ? 0 : MIPS1_TLB_PID_SHIFT) 746 747 #define MIPS_TLB_PID \ 748 ((MIPS_HAS_R4K_MMU) ? MIPS3_TLB_PID : MIPS1_TLB_PID) 749 750 #define MIPS_TLB_NUM_PIDS \ 751 ((MIPS_HAS_R4K_MMU) ? MIPS3_TLB_NUM_ASIDS : MIPS1_TLB_NUM_PIDS) 752 #endif 753 754 /* 755 * Bits defined for for the HWREna (CP0 register 7, select 0). 756 */ 757 #define MIPS_HWRENA_IMPL31 __BIT(31) 758 #define MIPS_HWRENA_IMPL30 __BIT(30) 759 #define MIPS_HWRENA_UL __BIT(29) /* Userlocal */ 760 #define MIPS_HWRENA_CCRES __BIT(3) 761 #define MIPS_HWRENA_CC __BIT(2) 762 #define MIPS_HWRENA_SYNCI_STEP __BIT(1) 763 #define MIPS_HWRENA_CPUNUM __BIT(0) 764 765 /* 766 * Hints for the prefetch instruction 767 */ 768 769 /* 770 * Prefetched data is expected to be read (not modified) 771 */ 772 #define PREF_LOAD 0 773 #define PREF_LOAD_STREAMED 4 /* but not reused extensively; it */ 774 /* "streams" through cache. */ 775 #define PREF_LOAD_RETAINED 6 /* and reused extensively; it should */ 776 /* be "retained" in the cache. */ 777 778 /* 779 * Prefetched data is expected to be stored or modified 780 */ 781 #define PREF_STORE 1 782 #define PREF_STORE_STREAMED 5 /* but not reused extensively; it */ 783 /* "streams" through cache. */ 784 #define PREF_STORE_RETAINED 7 /* and reused extensively; it should */ 785 /* be "retained" in the cache. */ 786 787 /* 788 * data is no longer expected to be used. For a WB cache, schedule a 789 * writeback of any dirty data and afterwards free the cache lines. 790 */ 791 #define PREF_WB_INV 25 792 #define PREF_NUDGE PREF_WB_INV 793 794 /* 795 * Prepare for writing an entire cache line without the overhead 796 * involved in filling the line from memory. 797 */ 798 #define PREF_PREPAREFORSTORE 30 799 800 /* 801 * CPU processor revision IDs for company ID == 0 (non mips32/64 chips) 802 */ 803 #define MIPS_R2000 0x01 /* MIPS R2000 ISA I */ 804 #define MIPS_R3000 0x02 /* MIPS R3000 ISA I */ 805 #define MIPS_R6000 0x03 /* MIPS R6000 ISA II */ 806 #define MIPS_R4000 0x04 /* MIPS R4000/R4400 ISA III */ 807 #define MIPS_R3LSI 0x05 /* LSI Logic R3000 derivative ISA I */ 808 #define MIPS_R6000A 0x06 /* MIPS R6000A ISA II */ 809 #define MIPS_R3IDT 0x07 /* IDT R3041 or RC36100 ISA I */ 810 #define MIPS_R10000 0x09 /* MIPS R10000 ISA IV */ 811 #define MIPS_R4200 0x0a /* NEC VR4200 ISA III */ 812 #define MIPS_R4300 0x0b /* NEC VR4300 ISA III */ 813 #define MIPS_R4100 0x0c /* NEC VR4100 ISA III */ 814 #define MIPS_R12000 0x0e /* MIPS R12000 ISA IV */ 815 #define MIPS_R14000 0x0f /* MIPS R14000 ISA IV */ 816 #define MIPS_R8000 0x10 /* MIPS R8000 Blackbird/TFP ISA IV */ 817 #define MIPS_RC32300 0x18 /* IDT RC32334,332,355 ISA 32 */ 818 #define MIPS_R4600 0x20 /* QED R4600 Orion ISA III */ 819 #define MIPS_R4700 0x21 /* QED R4700 Orion ISA III */ 820 #define MIPS_R3SONY 0x21 /* Sony R3000 based ISA I */ 821 #define MIPS_R4650 0x22 /* QED R4650 ISA III */ 822 #define MIPS_TX3900 0x22 /* Toshiba TX39 family ISA I */ 823 #define MIPS_R5000 0x23 /* MIPS R5000 ISA IV */ 824 #define MIPS_R3NKK 0x23 /* NKK R3000 based ISA I */ 825 #define MIPS_RC32364 0x26 /* IDT RC32364 ISA 32 */ 826 #define MIPS_RM7000 0x27 /* QED RM7000 ISA IV */ 827 #define MIPS_RM5200 0x28 /* QED RM5200s ISA IV */ 828 #define MIPS_TX4900 0x2d /* Toshiba TX49 family ISA III */ 829 #define MIPS_R5900 0x2e /* Toshiba R5900 (EECore) ISA --- */ 830 #define MIPS_RC64470 0x30 /* IDT RC64474/RC64475 ISA III */ 831 #define MIPS_TX7900 0x38 /* Toshiba TX79 ISA III+*/ 832 #define MIPS_R5400 0x54 /* NEC VR5400 ISA IV */ 833 #define MIPS_R5500 0x55 /* NEC VR5500 ISA IV */ 834 835 /* 836 * CPU revision IDs for some prehistoric processors. 837 */ 838 839 /* For MIPS_R3000 */ 840 #define MIPS_REV_R2000A 0x16 /* R2000A uses R3000 proc revision */ 841 #define MIPS_REV_R3000 0x20 842 #define MIPS_REV_R3000A 0x30 843 844 /* For MIPS_TX3900 */ 845 #define MIPS_REV_TX3912 0x10 846 #define MIPS_REV_TX3922 0x30 847 #define MIPS_REV_TX3927 0x40 848 849 /* For MIPS_R4000 */ 850 #define MIPS_REV_R4000_A 0x00 851 #define MIPS_REV_R4000_B 0x22 852 #define MIPS_REV_R4000_C 0x30 853 #define MIPS_REV_R4400_A 0x40 854 #define MIPS_REV_R4400_B 0x50 855 #define MIPS_REV_R4400_C 0x60 856 857 /* For MIPS_TX4900 */ 858 #define MIPS_REV_TX4927 0x22 859 860 /* 861 * CPU processor revision IDs for company ID == 1 (MIPS) 862 */ 863 #define MIPS_4Kc 0x80 /* MIPS 4Kc ISA 32 */ 864 #define MIPS_5Kc 0x81 /* MIPS 5Kc ISA 64 */ 865 #define MIPS_20Kc 0x82 /* MIPS 20Kc ISA 64 */ 866 #define MIPS_4Kmp 0x83 /* MIPS 4Km/4Kp ISA 32 */ 867 #define MIPS_4KEc 0x84 /* MIPS 4KEc ISA 32 */ 868 #define MIPS_4KEmp 0x85 /* MIPS 4KEm/4KEp ISA 32 */ 869 #define MIPS_4KSc 0x86 /* MIPS 4KSc ISA 32 */ 870 #define MIPS_M4K 0x87 /* MIPS M4K ISA 32 Rel 2 */ 871 #define MIPS_25Kf 0x88 /* MIPS 25Kf ISA 64 */ 872 #define MIPS_5KE 0x89 /* MIPS 5KE ISA 64 Rel 2 */ 873 #define MIPS_4KEc_R2 0x90 /* MIPS 4KEc_R2 ISA 32 Rel 2 */ 874 #define MIPS_4KEmp_R2 0x91 /* MIPS 4KEm/4KEp_R2 ISA 32 Rel 2 */ 875 #define MIPS_4KSd 0x92 /* MIPS 4KSd ISA 32 Rel 2 */ 876 #define MIPS_24K 0x93 /* MIPS 24Kc/24Kf ISA 32 Rel 2 */ 877 #define MIPS_34K 0x95 /* MIPS 34K ISA 32 R2 MT */ 878 #define MIPS_24KE 0x96 /* MIPS 24KEc ISA 32 Rel 2 */ 879 #define MIPS_74K 0x97 /* MIPS 74Kc/74Kf ISA 32 Rel 2 */ 880 #define MIPS_1004K 0x99 /* MIPS 1004Kc/1004Kf ISA 32 Rel 2 */ 881 #define MIPS_1074K 0x9a /* MIPS 1074K ISA 32 Rel 2 */ 882 883 /* 884 * Alchemy (company ID 3) use the processor ID field to donote the CPU core 885 * revision and the company options field do donate the SOC chip type. 886 */ 887 /* CPU processor revision IDs */ 888 #define MIPS_AU_REV1 0x01 /* Alchemy Au1000 (Rev 1) ISA 32 */ 889 #define MIPS_AU_REV2 0x02 /* Alchemy Au1000 (Rev 2) ISA 32 */ 890 /* CPU company options IDs */ 891 #define MIPS_AU1000 0x00 892 #define MIPS_AU1500 0x01 893 #define MIPS_AU1100 0x02 894 #define MIPS_AU1550 0x03 895 896 /* 897 * CPU processor revision IDs for company ID == 4 (SiByte) 898 */ 899 #define MIPS_SB1 0x01 /* SiByte SB1 ISA 64 */ 900 901 /* 902 * CPU processor revision IDs for company ID == 5 (SandCraft) 903 */ 904 #define MIPS_SR7100 0x04 /* SandCraft SR7100 ISA 64 */ 905 906 /* 907 * CPU revision IDs for company ID == 12 (RMI) 908 * note: unlisted Rev values may indicate pre-production silicon 909 */ 910 #define MIPS_XLR_B2 0x04 /* RMI XLR Production Rev B2 */ 911 #define MIPS_XLR_C4 0x91 /* RMI XLR Production Rev C4 */ 912 913 /* 914 * CPU processor IDs for company ID == 12 (RMI) 915 */ 916 #define MIPS_XLP8XX 0x10 /* RMI XLP8XX/XLP4XX ISA 64 Rel 2 */ 917 #define MIPS_XLP3XX 0x11 /* RMI XLP3XX ISA 64 Rel 2 */ 918 #define MIPS_XLR308B 0x06 /* RMI XLR308-B ISA 64 */ 919 #define MIPS_XLR508B 0x07 /* RMI XLR508-B ISA 64 */ 920 #define MIPS_XLR516B 0x08 /* RMI XLR516-B ISA 64 */ 921 #define MIPS_XLR532B 0x09 /* RMI XLR532-B ISA 64 */ 922 #define MIPS_XLR716B 0x0a /* RMI XLR716-B ISA 64 */ 923 #define MIPS_XLR732B 0x0b /* RMI XLR732-B ISA 64 */ 924 #define MIPS_XLR732C 0x00 /* RMI XLR732-C ISA 64 */ 925 #define MIPS_XLR716C 0x02 /* RMI XLR716-C ISA 64 */ 926 #define MIPS_XLR532C 0x08 /* RMI XLR532-C ISA 64 */ 927 #define MIPS_XLR516C 0x0a /* RMI XLR516-C ISA 64 */ 928 #define MIPS_XLR508C 0x0b /* RMI XLR508-C ISA 64 */ 929 #define MIPS_XLR308C 0x0f /* RMI XLR308-C ISA 64 */ 930 #define MIPS_XLS616 0x40 /* RMI XLS616 ISA 64 */ 931 #define MIPS_XLS416 0x44 /* RMI XLS416 ISA 64 */ 932 #define MIPS_XLS608 0x4A /* RMI XLS608 ISA 64 */ 933 #define MIPS_XLS408 0x4E /* RMI XLS406 ISA 64 */ 934 #define MIPS_XLS404 0x4F /* RMI XLS404 ISA 64 */ 935 #define MIPS_XLS408LITE 0x88 /* RMI XLS408-Lite ISA 64 */ 936 #define MIPS_XLS404LITE 0x8C /* RMI XLS404-Lite ISA 64 */ 937 #define MIPS_XLS208 0x8E /* RMI XLS208 ISA 64 */ 938 #define MIPS_XLS204 0x8F /* RMI XLS204 ISA 64 */ 939 #define MIPS_XLS108 0xCE /* RMI XLS108 ISA 64 */ 940 #define MIPS_XLS104 0xCF /* RMI XLS104 ISA 64 */ 941 942 /* 943 * FPU processor revision ID 944 */ 945 #define MIPS_SOFT 0x00 /* Software emulation ISA I */ 946 #define MIPS_R2360 0x01 /* MIPS R2360 FPC ISA I */ 947 #define MIPS_R2010 0x02 /* MIPS R2010 FPC ISA I */ 948 #define MIPS_R3010 0x03 /* MIPS R3010 FPC ISA I */ 949 #define MIPS_R6010 0x04 /* MIPS R6010 FPC ISA II */ 950 #define MIPS_R4010 0x05 /* MIPS R4010 FPC ISA II */ 951 #define MIPS_R31LSI 0x06 /* LSI Logic derivate ISA I */ 952 #define MIPS_R3TOSH 0x22 /* Toshiba R3000 based FPU ISA I */ 953 954 #ifdef ENABLE_MIPS_TX3900 955 #include <mips/r3900regs.h> 956 #endif 957 #ifdef MIPS64_SB1 958 #include <mips/sb1regs.h> 959 #endif 960 961 #endif /* _MIPS_CPUREGS_H_ */ 962
Indexes created Mon Oct 27 20:09:55 GMT 2025