mips_param.h revision 1.7 1 /* $NetBSD: mips_param.h,v 1.7 1997/09/20 12:08:06 leo Exp $ */
2
3 /*
4 * Architecture name.
5 */
6 #define _MACHINE_ARCH mips
7 #define MACHINE_ARCH "mips"
8
9 /*
10 * NOTE: SSIZE, SINCR and UPAGES must be multiples of CLSIZE.
11 * On mips, UPAGES is fixed by sys/arch/mips/mips/locore code
12 * to be the number of per-process-wired kernel-stack pages/PTES.
13 */
14
15 #define SSIZE 1 /* initial stack size/NBPG */
16 #define SINCR 1 /* increment of stack/NBPG */
17
18 #define UPAGES 2 /* pages of u-area */
19 #define UADDR 0xffffc000 /* address of u */
20 #define USPACE (UPAGES*NBPG) /* size of u-area in bytes */
21 #define UVPN (UADDR>>PGSHIFT)/* virtual page number of u */
22 #define KERNELSTACK (UADDR+UPAGES*NBPG) /* top of kernel stack */
23
24 #ifndef MSGBUFSIZE
25 #define MSGBUFSIZE NBPG /* default message buffer size */
26 #endif
27
28 /*
29 * Round p (pointer or byte index) up to a correctly-aligned value for all
30 * data types (int, long, ...). The result is u_int and must be cast to
31 * any desired pointer type.
32 */
33 #define ALIGNBYTES 7
34 #define ALIGN(p) (((u_int)(p) + ALIGNBYTES) &~ ALIGNBYTES)
35 #define ALIGNED_POINTER(p,t) ((((u_long)(p)) & (sizeof(t)-1)) == 0)
36
37 #define NBPG 4096 /* bytes/page */
38 #define PGOFSET (NBPG-1) /* byte offset into page */
39 #define PGSHIFT 12 /* LOG2(NBPG) */
40 #define NPTEPG (NBPG/4)
41
42 #define NBSEG 0x400000 /* bytes/segment */
43 #define SEGOFSET (NBSEG-1) /* byte offset into segment */
44 #define SEGSHIFT 22 /* LOG2(NBSEG) */
45
46 /*
47 * Size of kernel malloc arena in CLBYTES-sized logical pages
48 */
49 #ifndef NKMEMCLUSTERS
50 #define NKMEMCLUSTERS (512*1024/CLBYTES)
51 #endif
52
53 /* pages ("clicks") (4096 bytes) to disk blocks */
54 #define ctod(x) ((x) << (PGSHIFT - DEV_BSHIFT))
55 #define dtoc(x) ((x) >> (PGSHIFT - DEV_BSHIFT))
56
57 /* pages to bytes */
58 #define ctob(x) ((x) << PGSHIFT)
59 #define btoc(x) (((x) + PGOFSET) >> PGSHIFT)
60
61 /* bytes to disk blocks */
62 #define btodb(x) ((x) >> DEV_BSHIFT)
63 #define dbtob(x) ((x) << DEV_BSHIFT)
64
65 /*
66 * Map a ``block device block'' to a file system block.
67 * This should be device dependent, and should use the bsize
68 * field from the disk label.
69 * For now though just use DEV_BSIZE.
70 */
71 #define bdbtofsb(bn) ((bn) / (BLKDEV_IOSIZE/DEV_BSIZE))
72
73 /*
74 * Mach derived conversion macros
75 */
76 #define mips_round_page(x) ((((unsigned)(x)) + NBPG - 1) & ~(NBPG-1))
77 #define mips_trunc_page(x) ((unsigned)(x) & ~(NBPG-1))
78 #define mips_btop(x) ((unsigned)(x) >> PGSHIFT)
79 #define mips_ptob(x) ((unsigned)(x) << PGSHIFT)
80
81 #ifdef _KERNEL
82 #ifndef _LOCORE
83 typedef int spl_t;
84 extern spl_t splx __P((spl_t));
85 extern spl_t splsoftnet __P((void)), splsoftclock __P((void));
86 extern spl_t splhigh __P((void));
87 extern spl_t spl0 __P((void)); /* XXX should not enable TC on 3min */
88
89 extern void setsoftnet __P((void)), clearsoftnet __P((void));
90 extern void setsoftclock __P((void)), clearsoftclock __P((void));
91
92
93 extern int (*Mach_splnet) __P((void)), (*Mach_splbio) __P((void)),
94 (*Mach_splimp) __P((void)), (*Mach_spltty) __P((void)),
95 (*Mach_splclock) __P((void)), (*Mach_splstatclock) __P((void)),
96 (*Mach_splnone) __P((void));
97 #define splnet() ((*Mach_splnet)())
98 #define splbio() ((*Mach_splbio)())
99 #define splimp() ((*Mach_splimp)())
100 #define spltty() ((*Mach_spltty)())
101 #define splclock() ((*Mach_splclock)())
102 #define splstatclock() ((*Mach_splstatclock)())
103
104 extern void delay __P((int n));
105 extern int cpuspeed;
106 #define DELAY(n) { register int N = cpuspeed * (n); while (--N > 0); }
107
108
109 #endif /* !_LOCORE */
110 #endif /* _KERNEL */
111