ralink_ohci.c revision 1.2.12.2 1 /* $NetBSD: ralink_ohci.c,v 1.2.12.2 2017/12/03 11:36:28 jdolecek Exp $ */
2 /*-
3 * Copyright (c) 2011 CradlePoint Technology, Inc.
4 * All rights reserved.
5 *
6 *
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
9 * are met:
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
15 *
16 * THIS SOFTWARE IS PROVIDED BY CRADLEPOINT TECHNOLOGY, INC. AND CONTRIBUTORS
17 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
18 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
19 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS
20 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
21 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
22 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
23 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
24 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
25 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
26 * POSSIBILITY OF SUCH DAMAGE.
27 */
28
29 /* ralink_ohci.c -- Ralink OHCI USB Driver */
30
31 #include "ehci.h"
32
33 #include <sys/cdefs.h>
34 __KERNEL_RCSID(0, "$NetBSD: ralink_ohci.c,v 1.2.12.2 2017/12/03 11:36:28 jdolecek Exp $");
35
36 #include <sys/param.h>
37 #include <sys/bus.h>
38
39 #include <dev/usb/usb.h>
40 #include <dev/usb/usbdi.h>
41 #include <dev/usb/usbdivar.h>
42 #include <dev/usb/usb_mem.h>
43
44 #include <dev/usb/ohcireg.h>
45 #include <dev/usb/ohcivar.h>
46
47 #include <mips/ralink/ralink_var.h>
48 #include <mips/ralink/ralink_reg.h>
49 #include <mips/ralink/ralink_usbhcvar.h>
50
51 #define OREAD4(sc, a) bus_space_read_4((sc)->iot, (sc)->ioh, (a))
52 #define OWRITE4(sc, a, x) bus_space_write_4((sc)->iot, (sc)->ioh, (a), (x))
53
54 struct ralink_ohci_softc {
55 struct ohci_softc sc_ohci;
56 #if NEHCI > 0
57 struct ralink_usb_hc sc_hc;
58 #endif
59 void *sc_ih;
60 };
61
62 static int ralink_ohci_match(device_t, cfdata_t, void *);
63 static void ralink_ohci_attach(device_t, device_t, void *);
64 static int ralink_ohci_detach(device_t, int);
65
66 CFATTACH_DECL2_NEW(ralink_ohci, sizeof(struct ralink_ohci_softc),
67 ralink_ohci_match, ralink_ohci_attach, ralink_ohci_detach,
68 ohci_activate, NULL, ohci_childdet);
69
70 /*
71 * ralink_ohci_match
72 */
73 static int
74 ralink_ohci_match(device_t parent, cfdata_t cf, void *aux)
75 {
76 return 1;
77 }
78
79 /*
80 * ralink_ohci_attach
81 */
82 static void
83 ralink_ohci_attach(device_t parent, device_t self, void *aux)
84 {
85 struct ralink_ohci_softc * const sc = device_private(self);
86 const struct mainbus_attach_args * const ma = aux;
87 int error;
88 #ifdef RALINK_OHCI_DEBUG
89 const char * const devname = device_xname(self);
90 #endif
91
92 aprint_naive(": OHCI USB controller\n");
93 aprint_normal(": OHCI USB controller\n");
94
95 sc->sc_ohci.sc_dev = self;
96 sc->sc_ohci.sc_bus.ub_hcpriv = sc;
97 sc->sc_ohci.iot = ma->ma_memt;
98 sc->sc_ohci.sc_bus.ub_dmatag = ma->ma_dmat;
99
100 /* Map I/O registers */
101 if ((error = bus_space_map(sc->sc_ohci.iot, RA_USB_OHCI_BASE,
102 RA_USB_BLOCK_SIZE, 0, &sc->sc_ohci.ioh)) != 0) {
103 aprint_error_dev(self, "can't map OHCI registers, "
104 "error=%d\n", error);
105 return;
106 }
107
108 sc->sc_ohci.sc_size = RA_USB_BLOCK_SIZE;
109
110 #ifdef RALINK_OHCI_DEBUG
111 printf("%s sc: %p ma: %p\n", devname, sc, ma);
112 printf("%s memt: %p dmat: %p\n", devname, ma->ma_memt, ma->ma_dmat);
113
114 printf("%s: OHCI HcRevision=0x%x\n", devname,
115 OREAD4(&sc->sc_ohci, OHCI_REVISION));
116 printf("%s: OHCI HcControl=0x%x\n", devname,
117 OREAD4(&sc->sc_ohci, OHCI_CONTROL));
118 printf("%s: OHCI HcCommandStatus=0x%x\n", devname,
119 OREAD4(&sc->sc_ohci, OHCI_COMMAND_STATUS));
120 printf("%s: OHCI HcInterruptStatus=0x%x\n", devname,
121 OREAD4(&sc->sc_ohci, OHCI_INTERRUPT_STATUS));
122 #endif
123
124 /* Disable OHCI interrupts. */
125 OWRITE4(&sc->sc_ohci, OHCI_INTERRUPT_DISABLE, OHCI_ALL_INTRS);
126
127 /* establish the MIPS level interrupt */
128 sc->sc_ih = ra_intr_establish(RA_IRQ_USB, ohci_intr, sc, 0);
129 if (sc->sc_ih == NULL) {
130 aprint_error_dev(self, "unable to establish irq %d\n",
131 RA_IRQ_USB);
132 goto fail_0;
133 }
134
135 /* Set vendor for root hub descriptor. */
136 sc->sc_ohci.sc_id_vendor = 0x1814;
137 strlcpy(sc->sc_ohci.sc_vendor, "Ralink", sizeof(sc->sc_ohci.sc_vendor));
138
139 /* Initialize OHCI */
140 error = ohci_init(&sc->sc_ohci);
141 if (error) {
142 aprint_error_dev(self, "init failed, error=%d\n", error);
143 goto fail_0;
144 }
145
146 #if NEHCI > 0
147 ralink_usb_hc_add(&sc->sc_hc, self);
148 #endif
149
150 if (!pmf_device_register1(self, ohci_suspend, ohci_resume,
151 ohci_shutdown))
152 aprint_error_dev(self, "couldn't establish power handler\n");
153
154 /* Attach usb device. */
155 sc->sc_ohci.sc_child = config_found(self, &sc->sc_ohci.sc_bus,
156 usbctlprint);
157
158 return;
159
160 fail_0:
161 bus_space_unmap(sc->sc_ohci.iot, sc->sc_ohci.ioh, sc->sc_ohci.sc_size);
162 sc->sc_ohci.sc_size = 0;
163 }
164
165 static int
166 ralink_ohci_detach(device_t self, int flags)
167 {
168 struct ralink_ohci_softc *sc = device_private(self);
169 int rv;
170
171 pmf_device_deregister(self);
172
173 rv = ohci_detach(&sc->sc_ohci, flags);
174 if (rv != 0)
175 return rv;
176
177 if (sc->sc_ih != NULL) {
178 ra_intr_disestablish(sc->sc_ih);
179 sc->sc_ih = NULL;
180 }
181
182 if (sc->sc_ohci.sc_size == 0) {
183 bus_space_unmap(sc->sc_ohci.iot, sc->sc_ohci.ioh,
184 sc->sc_ohci.sc_size);
185 sc->sc_ohci.sc_size = 0;
186 }
187
188 #if NEHCI > 0
189 ralink_usb_hc_rem(&sc->sc_hc);
190 #endif
191
192 return 0;
193 }
194