sbicvar.h revision 1.11
1/* $NetBSD: sbicvar.h,v 1.11 2003/08/07 16:28:41 agc Exp $ */ 2 3/* 4 * Copyright (c) 1990 The Regents of the University of California. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to Berkeley by 8 * Van Jacobson of Lawrence Berkeley Laboratory. 9 * 10 * Redistribution and use in source and binary forms, with or without 11 * modification, are permitted provided that the following conditions 12 * are met: 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in the 17 * documentation and/or other materials provided with the distribution. 18 * 3. Neither the name of the University nor the names of its contributors 19 * may be used to endorse or promote products derived from this software 20 * without specific prior written permission. 21 * 22 * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND 23 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 24 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 25 * ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE 26 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 27 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 28 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 29 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 30 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 31 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 * @(#)scsivar.h 7.1 (Berkeley) 5/8/90 35 */ 36#ifndef _SBICVAR_H_ 37#define _SBICVAR_H_ 38#include <sys/callout.h> 39#include <sys/malloc.h> 40 41 42/* 43 * DMA chains are used for Scatter-Gather DMA. 44 */ 45struct dma_chain { 46 int dc_count; 47 char *dc_addr; 48}; 49 50/* 51 * ACB. Holds additional information for each SCSI command Comments: We 52 * need a separate scsi command block because we may need to overwrite it 53 * with a request sense command. Basicly, we refrain from fiddling with 54 * the scsi_xfer struct (except do the expected updating of return values). 55 * We'll generally update: xs->{flags,resid,error,sense,status} and 56 * occasionally xs->retries. 57 */ 58struct sbic_acb { 59 TAILQ_ENTRY(sbic_acb) chain; 60 struct scsipi_xfer *xs; /* SCSI xfer ctrl block from above */ 61 int flags; /* Status */ 62#define ACB_FREE 0x00 63#define ACB_ACTIVE 0x01 64#define ACB_DONE 0x04 65#define ACB_BBUF 0x10 /* DMA input needs to be copied from bounce */ 66#define ACB_DATAIN 0x20 /* DMA direction flag */ 67 68 struct scsi_generic cmd; /* SCSI command block */ 69 int clen; 70 struct dma_chain sc_kv; /* Virtual address of whole DMA */ 71 struct dma_chain sc_pa; /* Physical address of DMA segment */ 72 u_long sc_tcnt; /* number of bytes for this DMA */ 73 u_short sc_dmacmd; /* Internal data for this DMA */ 74 char *pa_addr; /* XXXX initial phys addr */ 75}; 76 77/* 78 * Some info about each (possible) target on the SCSI bus. This should 79 * probably have been a "per target+lunit" structure, but we'll leave it at 80 * this for now. Is there a way to reliably hook it up to sc->fordriver?? 81 */ 82struct sbic_tinfo { 83 int cmds; /* #commands processed */ 84 int dconns; /* #disconnects */ 85 int lubusy; /* What local units/subr. are busy? */ 86}; 87 88struct sbic_softc { 89 struct device sc_dev; 90 struct target_sync { 91 u_char state; 92 u_char period; 93 u_char offset; 94 } sc_sync[8]; 95 u_char target; /* Currently active target */ 96 u_char lun; 97 struct scsipi_channel sc_channel; /* proto for sub devices */ 98 struct scsipi_adapter sc_adapter; 99 sbic_regmap_p sc_sbicp; /* the SBIC */ 100 void *sc_driver; /* driver specific field */ 101 int sc_ipl; 102 103 struct callout sc_timo_ch; 104 105 /* Lists of command blocks */ 106 TAILQ_HEAD(acb_list, sbic_acb) free_list, 107 ready_list, 108 nexus_list; 109 110 struct sbic_acb *sc_nexus; /* current command */ 111 struct sbic_acb sc_acb[8]; /* the real command blocks */ 112 struct sbic_tinfo sc_tinfo[8]; 113 114 struct scsipi_xfer *sc_xs; /* transfer from high level code */ 115 u_char sc_flags; 116 u_char sc_stat[2]; 117 u_char sc_msg[7]; 118 u_long sc_clkfreq; 119 u_long sc_tcnt; /* number of bytes transfered */ 120 u_short sc_dmacmd; /* used by DMA drivers */ 121 u_long sc_dmamask; /* DMA valid mem mask */ 122#ifdef DEBUG 123 u_short sc_dmatimo; /* DMA timeout */ 124#endif 125 struct dma_chain *sc_cur; 126 struct dma_chain *sc_last; 127 int (*sc_dmago) __P((struct sbic_softc *, char *, int, int)); 128 int (*sc_dmanext) __P((struct sbic_softc *)); 129 void (*sc_enintr) __P((struct sbic_softc *)); 130 void (*sc_dmastop) __P((struct sbic_softc *)); 131}; 132 133/* 134 * sc_flags 135 */ 136#define SBICF_ALIVE 0x01 /* controller initialized */ 137#define SBICF_DCFLUSH 0x02 /* need flush for overlap after DMA finishes */ 138#define SBICF_SELECTED 0x04 /* bus is in selected state. */ 139#define SBICF_ICMD 0x08 /* Immediate command in execution */ 140#define SBICF_BADDMA 0x10 /* controller can only DMA to ztwobus space */ 141#define SBICF_INTR 0x40 /* SBICF interrupt expected */ 142#define SBICF_INDMA 0x80 /* not used yet, DMA I/O in progress */ 143 144/* 145 * sync states 146 */ 147#define SYNC_START 0 /* no sync handshake started */ 148#define SYNC_SENT 1 /* we sent sync request, no answer yet */ 149#define SYNC_DONE 2 /* target accepted our (or inferior) settings, 150 or it rejected the request and we stay async */ 151 152#define PHASE 0x07 /* mask for psns/pctl phase */ 153#define DATA_OUT_PHASE 0x00 154#define DATA_IN_PHASE 0x01 155#define CMD_PHASE 0x02 156#define STATUS_PHASE 0x03 157#define BUS_FREE_PHASE 0x04 158#define ARB_SEL_PHASE 0x05 /* Fuji chip combines arbitration with sel. */ 159#define MESG_OUT_PHASE 0x06 160#define MESG_IN_PHASE 0x07 161 162#define MSG_CMD_COMPLETE 0x00 163#define MSG_EXT_MESSAGE 0x01 164#define MSG_SAVE_DATA_PTR 0x02 165#define MSG_RESTORE_PTR 0x03 166#define MSG_DISCONNECT 0x04 167#define MSG_INIT_DETECT_ERROR 0x05 168#define MSG_ABORT 0x06 169#define MSG_REJECT 0x07 170#define MSG_NOOP 0x08 171#define MSG_PARITY_ERROR 0x09 172#define MSG_BUS_DEVICE_RESET 0x0C 173#define MSG_IDENTIFY 0x80 174#define MSG_IDENTIFY_DR 0xc0 /* (disconnect/reconnect allowed) */ 175#define MSG_SYNC_REQ 0x01 176 177#define MSG_ISIDENTIFY(x) ((x) & MSG_IDENTIFY) 178 179 180#define STS_CHECKCOND 0x02 /* Check Condition (ie., read sense) */ 181#define STS_CONDMET 0x04 /* Condition Met (ie., search worked) */ 182#define STS_BUSY 0x08 183#define STS_INTERMED 0x10 /* Intermediate status sent */ 184#define STS_EXT 0x80 /* Extended status valid */ 185 186 187/* 188 * States returned by our state machine 189 */ 190 191#define SBIC_STATE_ERROR -1 192#define SBIC_STATE_DONE 0 193#define SBIC_STATE_RUNNING 1 194#define SBIC_STATE_DISCONNECT 2 195 196 197struct buf; 198struct scsipi_xfer; 199 200void sbic_minphys __P((struct buf *bp)); 201void sbic_scsi_request __P((struct scsipi_channel *, 202 scsipi_adapter_req_t, void *)); 203void sbicinit __P((struct sbic_softc *)); 204int sbicintr __P((struct sbic_softc *)); 205 206#endif /* _SBICVAR_H_ */ 207