GENERIC revision 1.111 1 1.111 tsutsui # $NetBSD: GENERIC,v 1.111 2008/05/30 20:10:02 tsutsui Exp $
2 1.1 dbj #
3 1.50 gmcgarry # GENERIC machine description file
4 1.50 gmcgarry #
5 1.50 gmcgarry # This machine description file is used to generate the default NetBSD
6 1.50 gmcgarry # kernel. The generic kernel does not include all options, subsystems
7 1.50 gmcgarry # and device drivers, but should be useful for most applications.
8 1.1 dbj #
9 1.50 gmcgarry # The machine description file can be customised for your specific
10 1.50 gmcgarry # machine to reduce the kernel size and improve its performance.
11 1.1 dbj #
12 1.50 gmcgarry # For further information on compiling NetBSD kernels, see the config(8)
13 1.50 gmcgarry # man page.
14 1.50 gmcgarry #
15 1.50 gmcgarry # For further information on hardware support for this architecture, see
16 1.50 gmcgarry # the intro(4) man page. For further information about kernel options
17 1.50 gmcgarry # for this architecture, see the options(4) man page. For an explanation
18 1.50 gmcgarry # of each device driver in this file see the section 4 man page for the
19 1.50 gmcgarry # device.
20 1.1 dbj
21 1.50 gmcgarry include "arch/next68k/conf/std.next68k"
22 1.24 hubertf
23 1.55 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary
24 1.55 atatat
25 1.111 tsutsui #ident "GENERIC-$Revision: 1.111 $"
26 1.1 dbj
27 1.1 dbj # Needs to be set per system. i.e change these as you see fit
28 1.1 dbj maxusers 16
29 1.1 dbj
30 1.1 dbj # Standard system options
31 1.1 dbj options KTRACE # system call tracing
32 1.1 dbj options SYSVMSG # System V message queues
33 1.1 dbj options SYSVSEM # System V semaphores
34 1.48 lukem #options SEMMNI=10 # number of semaphore identifiers
35 1.48 lukem #options SEMMNS=60 # number of semaphores in system
36 1.48 lukem #options SEMUME=10 # max number of undo entries per process
37 1.48 lukem #options SEMMNU=30 # number of undo structures in system
38 1.1 dbj options SYSVSHM # System V shared memory
39 1.73 mycroft options P1003_1B_SEMAPHORE # POSIX semaphore support
40 1.1 dbj #options SHMMAXPGS=1024 # 1024 pages is the default
41 1.1 dbj
42 1.1 dbj options LKM # loadable kernel modules
43 1.1 dbj options INSECURE # disable kernel security level
44 1.63 lukem options USERCONF # userconf(4) support
45 1.53 jdolecek #options PIPE_SOCKETPAIR # smaller, but slower pipe(2)
46 1.78 atatat options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel
47 1.67 junyoung
48 1.68 wiz # Enable experimental buffer queue strategy for better responsiveness under
49 1.67 junyoung # high disk I/O load. Use it with caution - it's not proven to be stable yet.
50 1.87 tsutsui #options BUFQ_READPRIO
51 1.87 tsutsui #options BUFQ_PRIOCSCAN
52 1.1 dbj
53 1.96 chs #options DEBUG # kernel debugging code
54 1.96 chs #options DIAGNOSTIC # extra kernel sanity checking
55 1.22 dbj
56 1.1 dbj # Which kernel debugger? Uncomment either this:
57 1.1 dbj options DDB
58 1.3 dbj options DDB_HISTORY_SIZE=100 # enable history editing in DDB
59 1.3 dbj
60 1.1 dbj # ... or these for KGDB (gdb remote target)
61 1.48 lukem #makeoptions DEBUG="-g" # debugging symbols for gdb
62 1.47 lukem #options KGDB # support for kernel gdb
63 1.47 lukem #options KGDB_DEV=0xc01 # kgdb device number (dev_t)
64 1.47 lukem #options KGDB_DEVRATE=9600 # baud rate
65 1.1 dbj
66 1.1 dbj # Other debugging options
67 1.1 dbj options KMEMSTATS # kernel memory statistics (vmstat -m)
68 1.1 dbj #options PMAP_DEBUG
69 1.1 dbj options SCSIDEBUG
70 1.1 dbj options SCSIVERBOSE # Verbose SCSI errors
71 1.48 lukem options SWAPDEBUG
72 1.1 dbj
73 1.41 wiz # Compatibility options
74 1.1 dbj options COMPAT_43 # and 4.3BSD and ...
75 1.1 dbj options COMPAT_44 # and 4.4BSD and ...
76 1.3 dbj options COMPAT_09 # NetBSD 0.9
77 1.1 dbj options COMPAT_10 # NetBSD 1.0
78 1.1 dbj options COMPAT_11 # NetBSD 1.1
79 1.1 dbj options COMPAT_12 # NetBSD 1.2
80 1.1 dbj options COMPAT_13 # NetBSD 1.3
81 1.17 augustss options COMPAT_14 # NetBSD 1.4
82 1.72 cl options COMPAT_15 # NetBSD 1.5
83 1.72 cl options COMPAT_16 # NetBSD 1.6
84 1.86 simonb options COMPAT_20 # NetBSD 2.0
85 1.111 tsutsui options COMPAT_30 # NetBSD 3.0
86 1.111 tsutsui options COMPAT_40 # NetBSD 4.0 compatibility.
87 1.1 dbj
88 1.43 abs #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended.
89 1.43 abs
90 1.28 deberg options COMPAT_M68K4K # compatibility with NetBSD/m68k4k binaries
91 1.3 dbj options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8,
92 1.3 dbj options COMPAT_SUNOS # can run SunOS 4.1.1 executables
93 1.15 kleink #options COMPAT_SVR4 # can run SVR4 executables
94 1.7 itohy #options COMPAT_LINUX # can run Linux/m68k executables
95 1.40 chs options COMPAT_AOUT_M68K # support for NetBSD a.out executables
96 1.40 chs options EXEC_AOUT # support for a.out executables
97 1.80 christos options COMPAT_BSDPTY # /dev/[pt]ty?? ptys.
98 1.1 dbj
99 1.1 dbj # File systems
100 1.65 mycroft file-system FFS # UFS
101 1.13 dbj #file-system EXT2FS # second extended file system (linux)
102 1.13 dbj #file-system LFS # log-structured file system
103 1.1 dbj file-system MFS # memory file system
104 1.1 dbj file-system NFS # Network File System client
105 1.13 dbj #file-system CD9660 # ISO 9660 + Rock Ridge file system
106 1.13 dbj #file-system MSDOSFS # MS-DOS file system
107 1.1 dbj file-system FDESC # /dev/fd
108 1.1 dbj file-system KERNFS # /kern
109 1.1 dbj file-system NULLFS # loopback file system
110 1.23 wrstuden file-system OVERLAY # overlay file system
111 1.1 dbj file-system PORTAL # portal filesystem (still experimental)
112 1.1 dbj file-system PROCFS # /proc
113 1.1 dbj file-system UMAPFS # NULLFS + uid and gid remapping
114 1.1 dbj file-system UNION # union file system
115 1.94 christos file-system PTYFS # /dev/pts/N support
116 1.107 jmmv #file-system TMPFS # Efficient memory file-system
117 1.99 reinoud #file-system UDF # experimental - OSTA UDF CD/DVD file-system
118 1.1 dbj
119 1.1 dbj options NFSSERVER # nfs server support
120 1.57 jdolecek #options QUOTA # FFS quotas
121 1.56 matt #options SOFTDEP # FFS soft updates support.
122 1.82 rumble #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental
123 1.97 tsutsui options FFS_NO_SNAPSHOT # No FFS snapshot support
124 1.1 dbj #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
125 1.1 dbj # immutable) behave as system flags.
126 1.21 itojun
127 1.1 dbj # Networking options
128 1.1 dbj options GATEWAY # packet forwarding
129 1.1 dbj options INET # IP + ICMP + TCP + UDP
130 1.21 itojun options INET6 # IPV6
131 1.21 itojun #options IPSEC # IP security
132 1.21 itojun #options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
133 1.89 tron #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T)
134 1.21 itojun #options IPSEC_DEBUG # debug for IP security
135 1.1 dbj #options MROUTING # IP multicast routing
136 1.79 manu #options PIM # Protocol Independent Multicast
137 1.1 dbj #options ISO,TPIP # OSI
138 1.1 dbj #options EON # OSI tunneling over IP
139 1.1 dbj #options NETATALK # AppleTalk networking protocols
140 1.16 christos options PPP_BSDCOMP # BSD-Compress compression support for PPP
141 1.16 christos options PPP_DEFLATE # Deflate compression support for PPP
142 1.16 christos options PPP_FILTER # Active filter support for PPP (requires bpf)
143 1.16 christos options PFIL_HOOKS # pfil(9) packet filter hooks
144 1.43 abs #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG
145 1.1 dbj
146 1.77 abs #options ALTQ # Manipulate network interfaces' output queues
147 1.77 abs #options ALTQ_BLUE # Stochastic Fair Blue
148 1.77 abs #options ALTQ_CBQ # Class-Based Queueing
149 1.77 abs #options ALTQ_CDNR # Diffserv Traffic Conditioner
150 1.77 abs #options ALTQ_FIFOQ # First-In First-Out Queue
151 1.77 abs #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box)
152 1.77 abs #options ALTQ_HFSC # Hierarchical Fair Service Curve
153 1.77 abs #options ALTQ_LOCALQ # Local queueing discipline
154 1.77 abs #options ALTQ_PRIQ # Priority Queueing
155 1.77 abs #options ALTQ_RED # Random Early Detection
156 1.77 abs #options ALTQ_RIO # RED with IN/OUT
157 1.77 abs #options ALTQ_WFQ # Weighted Fair Queueing
158 1.77 abs
159 1.1 dbj # NeXT specific options
160 1.1 dbj options M68040
161 1.62 mycroft options M68030
162 1.1 dbj options FPSP
163 1.1 dbj #options FPU_EMULATE
164 1.1 dbj
165 1.27 deberg options ZS_CONSOLE_ABORT # drop to debugger on break
166 1.27 deberg #options SERCONSOLE # use serial console
167 1.1 dbj
168 1.1 dbj options NFS_BOOT_BOOTP
169 1.1 dbj options NFS_BOOT_DHCP
170 1.3 dbj
171 1.9 dbj # wscons options
172 1.48 lukem options RCONS_2BPP # necessary for nextdisplay
173 1.48 lukem options RCONS_16BPP # necessary for color nextdisplay
174 1.10 dbj #options WSEMUL_SUN # sun terminal emulation
175 1.10 dbj options WSEMUL_VT100 # VT100 / VT220 emulation
176 1.9 dbj options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls
177 1.9 dbj options WSDISPLAY_COMPAT_USL # VT handling
178 1.9 dbj options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes
179 1.12 dbj # see dev/wskbdmap_next.h for implemented layouts
180 1.9 dbj #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
181 1.9 dbj
182 1.1 dbj config netbsd root on ? type ?
183 1.1 dbj
184 1.8 dbj #
185 1.8 dbj # Device configuration
186 1.8 dbj #
187 1.8 dbj
188 1.8 dbj # The root node:
189 1.8 dbj mainbus0 at root
190 1.8 dbj
191 1.8 dbj #fpu0 at mainbus?
192 1.8 dbj
193 1.8 dbj # device space
194 1.48 lukem intio0 at mainbus?
195 1.9 dbj
196 1.48 lukem nextkbd0 at intio? ipl 3
197 1.48 lukem nextdisplay0 at mainbus?
198 1.9 dbj
199 1.48 lukem wsdisplay* at nextdisplay? console ?
200 1.48 lukem wskbd* at nextkbd? console ?
201 1.8 dbj
202 1.8 dbj # INTIO
203 1.61 mycroft nextdma* at intio? ipl 6
204 1.61 mycroft
205 1.48 lukem zsc0 at intio? ipl 5
206 1.48 lukem #zsc1 at intio? ipl 5
207 1.8 dbj
208 1.48 lukem xe* at intio? ipl 3 # ethernet
209 1.8 dbj
210 1.64 mycroft esp0 at intio? ipl 3 flags 0xffff00 # Turn off sync negotiation
211 1.8 dbj
212 1.8 dbj #
213 1.8 dbj # Serial ports
214 1.8 dbj #
215 1.8 dbj zstty0 at zsc0 channel 0 # ttya
216 1.8 dbj zstty1 at zsc0 channel 1 # ttyb
217 1.8 dbj
218 1.8 dbj # SCSI bus support
219 1.60 mycroft scsibus* at scsi?
220 1.8 dbj
221 1.8 dbj # SCSI devices
222 1.64 mycroft sd* at scsibus? target ? lun ? # SCSI disk drives
223 1.64 mycroft st* at scsibus? target ? lun ? # SCSI tape drives
224 1.64 mycroft cd* at scsibus? target ? lun ? # SCSI CD-ROM drives
225 1.64 mycroft ch* at scsibus? target ? lun ? # SCSI autochangers
226 1.64 mycroft se* at scsibus? target ? lun ? # SCSI ethernet
227 1.64 mycroft ss* at scsibus? target ? lun ? # SCSI scanners
228 1.64 mycroft uk* at scsibus? target ? lun ? # SCSI unknown
229 1.8 dbj
230 1.8 dbj
231 1.1 dbj # Memory-disk drivers
232 1.1 dbj pseudo-device md 2
233 1.1 dbj
234 1.1 dbj # Misc.
235 1.1 dbj pseudo-device loop 1 # network loopback
236 1.100 rpaulo pseudo-device bpfilter # packet filter
237 1.103 liamjfoy #pseudo-device carp # Common Address Redundancy Protocol
238 1.101 cube pseudo-device sl # CSLIP
239 1.101 cube pseudo-device ppp # PPP
240 1.51 martin pseudo-device pppoe # PPP over Ethernet (RFC 2516)
241 1.101 cube pseudo-device tun # network tunneling over tty
242 1.81 cube pseudo-device tap # virtual Ethernet
243 1.101 cube #pseudo-device gre # generic L3 over IP tunnel
244 1.1 dbj pseudo-device ipfilter # ip filter
245 1.101 cube pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933)
246 1.101 cube #pseudo-device faith # IPv[46] tcp relay translation i/f
247 1.102 pavel pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation
248 1.37 bouyer pseudo-device vlan # IEEE 802.1q encapsulation
249 1.49 atatat pseudo-device bridge # simple inter-network bridging
250 1.69 perseant #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too
251 1.108 martin pseudo-device agr # IEEE 802.3ad link aggregation
252 1.36 itojun pseudo-device rnd # /dev/random and in-kernel generator
253 1.46 augustss #pseudo-device wsmux # mouse & keyboard multiplexor
254 1.1 dbj
255 1.34 jdolecek pseudo-device pty # pseudo-terminals
256 1.101 cube pseudo-device vnd # paging to files
257 1.90 hubertf #options VND_COMPRESSION # compressed vnd(4)
258 1.52 oster #pseudo-device raid 8 # RAIDframe disk driver
259 1.26 simonb #options RAID_AUTOCONFIG # auto-configuration of RAID components
260 1.52 oster # Options to enable various other RAIDframe RAID types.
261 1.52 oster # options RF_INCLUDE_EVENODD=1
262 1.52 oster # options RF_INCLUDE_RAID5_RS=1
263 1.52 oster # options RF_INCLUDE_PARITYLOGGING=1
264 1.52 oster # options RF_INCLUDE_CHAINDECLUSTER=1
265 1.52 oster # options RF_INCLUDE_INTERDECLUSTER=1
266 1.52 oster # options RF_INCLUDE_PARITY_DECLUSTERING=1
267 1.52 oster # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1
268 1.83 hannken pseudo-device fss 4 # file system snapshot device
269 1.1 dbj pseudo-device ccd 4 # concatenated disks
270 1.58 lukem pseudo-device clockctl # user control of clock subsystem
271 1.71 ragge pseudo-device ksyms # /dev/ksyms
272 1.76 itojun #pseudo-device pf # PF packet filter
273 1.76 itojun #pseudo-device pflog # PF log if
274 1.98 elad
275 1.98 elad # Veriexec
276 1.98 elad #
277 1.98 elad # a pseudo device needed for veriexec
278 1.98 elad #pseudo-device veriexec 1
279 1.98 elad #
280 1.98 elad # Uncomment the fingerprint methods below that are desired. Note that
281 1.98 elad # removing fingerprint methods will have almost no impact on the kernel
282 1.98 elad # code size.
283 1.98 elad #
284 1.98 elad #options VERIFIED_EXEC_FP_RMD160
285 1.98 elad #options VERIFIED_EXEC_FP_SHA256
286 1.98 elad #options VERIFIED_EXEC_FP_SHA384
287 1.98 elad #options VERIFIED_EXEC_FP_SHA512
288 1.98 elad #options VERIFIED_EXEC_FP_SHA1
289 1.98 elad #options VERIFIED_EXEC_FP_MD5
290