GENERIC revision 1.110
1# $NetBSD: GENERIC,v 1.110 2007/12/31 15:32:02 ad Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/next68k/conf/std.next68k" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#ident "GENERIC-$Revision: 1.110 $" 26 27# Needs to be set per system. i.e change these as you see fit 28maxusers 16 29 30# Standard system options 31options KTRACE # system call tracing 32options SYSVMSG # System V message queues 33options SYSVSEM # System V semaphores 34#options SEMMNI=10 # number of semaphore identifiers 35#options SEMMNS=60 # number of semaphores in system 36#options SEMUME=10 # max number of undo entries per process 37#options SEMMNU=30 # number of undo structures in system 38options SYSVSHM # System V shared memory 39options P1003_1B_SEMAPHORE # POSIX semaphore support 40#options SHMMAXPGS=1024 # 1024 pages is the default 41 42options LKM # loadable kernel modules 43options INSECURE # disable kernel security level 44options USERCONF # userconf(4) support 45#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 46options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 47 48# Enable experimental buffer queue strategy for better responsiveness under 49# high disk I/O load. Use it with caution - it's not proven to be stable yet. 50#options BUFQ_READPRIO 51#options BUFQ_PRIOCSCAN 52 53#options DEBUG # kernel debugging code 54#options DIAGNOSTIC # extra kernel sanity checking 55 56# Which kernel debugger? Uncomment either this: 57options DDB 58options DDB_HISTORY_SIZE=100 # enable history editing in DDB 59 60# ... or these for KGDB (gdb remote target) 61#makeoptions DEBUG="-g" # debugging symbols for gdb 62#options KGDB # support for kernel gdb 63#options KGDB_DEV=0xc01 # kgdb device number (dev_t) 64#options KGDB_DEVRATE=9600 # baud rate 65 66# Other debugging options 67options KMEMSTATS # kernel memory statistics (vmstat -m) 68#options PMAP_DEBUG 69options SCSIDEBUG 70options SCSIVERBOSE # Verbose SCSI errors 71options SWAPDEBUG 72 73# Compatibility options 74options COMPAT_43 # and 4.3BSD and ... 75options COMPAT_44 # and 4.4BSD and ... 76options COMPAT_09 # NetBSD 0.9 77options COMPAT_10 # NetBSD 1.0 78options COMPAT_11 # NetBSD 1.1 79options COMPAT_12 # NetBSD 1.2 80options COMPAT_13 # NetBSD 1.3 81options COMPAT_14 # NetBSD 1.4 82options COMPAT_15 # NetBSD 1.5 83options COMPAT_16 # NetBSD 1.6 84options COMPAT_20 # NetBSD 2.0 85options COMPAT_30 # NetBSD 3.0 compatibility. 86 87#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 88 89options COMPAT_M68K4K # compatibility with NetBSD/m68k4k binaries 90options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8, 91options COMPAT_SUNOS # can run SunOS 4.1.1 executables 92#options COMPAT_SVR4 # can run SVR4 executables 93#options COMPAT_LINUX # can run Linux/m68k executables 94options COMPAT_AOUT_M68K # support for NetBSD a.out executables 95options EXEC_AOUT # support for a.out executables 96options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 97 98# File systems 99file-system FFS # UFS 100#file-system EXT2FS # second extended file system (linux) 101#file-system LFS # log-structured file system 102file-system MFS # memory file system 103file-system NFS # Network File System client 104#file-system CD9660 # ISO 9660 + Rock Ridge file system 105#file-system MSDOSFS # MS-DOS file system 106file-system FDESC # /dev/fd 107file-system KERNFS # /kern 108file-system NULLFS # loopback file system 109file-system OVERLAY # overlay file system 110file-system PORTAL # portal filesystem (still experimental) 111file-system PROCFS # /proc 112file-system UMAPFS # NULLFS + uid and gid remapping 113file-system UNION # union file system 114file-system PTYFS # /dev/pts/N support 115#file-system TMPFS # Efficient memory file-system 116#file-system UDF # experimental - OSTA UDF CD/DVD file-system 117 118options NFSSERVER # nfs server support 119#options QUOTA # FFS quotas 120#options SOFTDEP # FFS soft updates support. 121#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 122options FFS_NO_SNAPSHOT # No FFS snapshot support 123#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 124 # immutable) behave as system flags. 125 126# Networking options 127options GATEWAY # packet forwarding 128options INET # IP + ICMP + TCP + UDP 129options INET6 # IPV6 130#options IPSEC # IP security 131#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 132#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 133#options IPSEC_DEBUG # debug for IP security 134#options MROUTING # IP multicast routing 135#options PIM # Protocol Independent Multicast 136#options ISO,TPIP # OSI 137#options EON # OSI tunneling over IP 138#options NETATALK # AppleTalk networking protocols 139options PPP_BSDCOMP # BSD-Compress compression support for PPP 140options PPP_DEFLATE # Deflate compression support for PPP 141options PPP_FILTER # Active filter support for PPP (requires bpf) 142options PFIL_HOOKS # pfil(9) packet filter hooks 143#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 144 145#options ALTQ # Manipulate network interfaces' output queues 146#options ALTQ_BLUE # Stochastic Fair Blue 147#options ALTQ_CBQ # Class-Based Queueing 148#options ALTQ_CDNR # Diffserv Traffic Conditioner 149#options ALTQ_FIFOQ # First-In First-Out Queue 150#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 151#options ALTQ_HFSC # Hierarchical Fair Service Curve 152#options ALTQ_LOCALQ # Local queueing discipline 153#options ALTQ_PRIQ # Priority Queueing 154#options ALTQ_RED # Random Early Detection 155#options ALTQ_RIO # RED with IN/OUT 156#options ALTQ_WFQ # Weighted Fair Queueing 157 158# NeXT specific options 159options M68040 160options M68030 161options FPSP 162#options FPU_EMULATE 163 164options ZS_CONSOLE_ABORT # drop to debugger on break 165#options SERCONSOLE # use serial console 166 167options NFS_BOOT_BOOTP 168options NFS_BOOT_DHCP 169 170# wscons options 171options RCONS_2BPP # necessary for nextdisplay 172options RCONS_16BPP # necessary for color nextdisplay 173#options WSEMUL_SUN # sun terminal emulation 174options WSEMUL_VT100 # VT100 / VT220 emulation 175options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 176options WSDISPLAY_COMPAT_USL # VT handling 177options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 178# see dev/wskbdmap_next.h for implemented layouts 179#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 180 181config netbsd root on ? type ? 182 183# 184# Device configuration 185# 186 187# The root node: 188mainbus0 at root 189 190#fpu0 at mainbus? 191 192# device space 193intio0 at mainbus? 194 195nextkbd0 at intio? ipl 3 196nextdisplay0 at mainbus? 197 198wsdisplay* at nextdisplay? console ? 199wskbd* at nextkbd? console ? 200 201# INTIO 202nextdma* at intio? ipl 6 203 204zsc0 at intio? ipl 5 205#zsc1 at intio? ipl 5 206 207xe* at intio? ipl 3 # ethernet 208 209esp0 at intio? ipl 3 flags 0xffff00 # Turn off sync negotiation 210 211# 212# Serial ports 213# 214zstty0 at zsc0 channel 0 # ttya 215zstty1 at zsc0 channel 1 # ttyb 216 217# SCSI bus support 218scsibus* at scsi? 219 220# SCSI devices 221sd* at scsibus? target ? lun ? # SCSI disk drives 222st* at scsibus? target ? lun ? # SCSI tape drives 223cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 224ch* at scsibus? target ? lun ? # SCSI autochangers 225se* at scsibus? target ? lun ? # SCSI ethernet 226ss* at scsibus? target ? lun ? # SCSI scanners 227uk* at scsibus? target ? lun ? # SCSI unknown 228 229 230# Memory-disk drivers 231pseudo-device md 2 232 233# Misc. 234pseudo-device loop 1 # network loopback 235pseudo-device bpfilter # packet filter 236#pseudo-device carp # Common Address Redundancy Protocol 237pseudo-device sl # CSLIP 238pseudo-device ppp # PPP 239pseudo-device pppoe # PPP over Ethernet (RFC 2516) 240pseudo-device tun # network tunneling over tty 241pseudo-device tap # virtual Ethernet 242#pseudo-device gre # generic L3 over IP tunnel 243pseudo-device ipfilter # ip filter 244pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 245#pseudo-device faith # IPv[46] tcp relay translation i/f 246pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 247pseudo-device vlan # IEEE 802.1q encapsulation 248pseudo-device bridge # simple inter-network bridging 249#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 250pseudo-device agr # IEEE 802.3ad link aggregation 251pseudo-device rnd # /dev/random and in-kernel generator 252#pseudo-device wsmux # mouse & keyboard multiplexor 253 254pseudo-device pty # pseudo-terminals 255pseudo-device vnd # paging to files 256#options VND_COMPRESSION # compressed vnd(4) 257#pseudo-device raid 8 # RAIDframe disk driver 258#options RAID_AUTOCONFIG # auto-configuration of RAID components 259# Options to enable various other RAIDframe RAID types. 260# options RF_INCLUDE_EVENODD=1 261# options RF_INCLUDE_RAID5_RS=1 262# options RF_INCLUDE_PARITYLOGGING=1 263# options RF_INCLUDE_CHAINDECLUSTER=1 264# options RF_INCLUDE_INTERDECLUSTER=1 265# options RF_INCLUDE_PARITY_DECLUSTERING=1 266# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 267pseudo-device fss 4 # file system snapshot device 268pseudo-device ccd 4 # concatenated disks 269pseudo-device clockctl # user control of clock subsystem 270pseudo-device ksyms # /dev/ksyms 271#pseudo-device pf # PF packet filter 272#pseudo-device pflog # PF log if 273 274# Veriexec 275# 276# a pseudo device needed for veriexec 277#pseudo-device veriexec 1 278# 279# Uncomment the fingerprint methods below that are desired. Note that 280# removing fingerprint methods will have almost no impact on the kernel 281# code size. 282# 283#options VERIFIED_EXEC_FP_RMD160 284#options VERIFIED_EXEC_FP_SHA256 285#options VERIFIED_EXEC_FP_SHA384 286#options VERIFIED_EXEC_FP_SHA512 287#options VERIFIED_EXEC_FP_SHA1 288#options VERIFIED_EXEC_FP_MD5 289