GENERIC revision 1.127
1 # $NetBSD: GENERIC,v 1.127 2012/06/05 08:44:14 abs Exp $ 2 # 3 # GENERIC machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/next68k/conf/std.next68k" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "GENERIC-$Revision: 1.127 $" 26 27 # Needs to be set per system. i.e change these as you see fit 28 maxusers 16 29 30 # Standard system options 31 options KTRACE # system call tracing 32 options SYSVMSG # System V message queues 33 options SYSVSEM # System V semaphores 34 #options SEMMNI=10 # number of semaphore identifiers 35 #options SEMMNS=60 # number of semaphores in system 36 #options SEMUME=10 # max number of undo entries per process 37 #options SEMMNU=30 # number of undo structures in system 38 options SYSVSHM # System V shared memory 39 40 options INSECURE # disable kernel security level 41 options USERCONF # userconf(4) support 42 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 43 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 44 45 # Enable experimental buffer queue strategy for better responsiveness under 46 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 47 #options BUFQ_READPRIO 48 #options BUFQ_PRIOCSCAN 49 50 #options DEBUG # kernel debugging code 51 #options DIAGNOSTIC # extra kernel sanity checking 52 53 # Which kernel debugger? Uncomment either this: 54 options DDB 55 options DDB_HISTORY_SIZE=100 # enable history editing in DDB 56 57 # ... or these for KGDB (gdb remote target) 58 #makeoptions DEBUG="-g" # debugging symbols for gdb 59 #options KGDB # support for kernel gdb 60 #options KGDB_DEV=0xc01 # kgdb device number (dev_t) 61 #options KGDB_DEVRATE=9600 # baud rate 62 63 # Other debugging options 64 options KMEMSTATS # kernel memory statistics (vmstat -m) 65 #options PMAP_DEBUG 66 options SCSIDEBUG 67 options SCSIVERBOSE # Verbose SCSI errors 68 options SWAPDEBUG 69 70 # Compatibility options 71 options COMPAT_43 # and 4.3BSD and ... 72 options COMPAT_44 # and 4.4BSD and ... 73 options COMPAT_09 # NetBSD 0.9 74 options COMPAT_10 # NetBSD 1.0 75 options COMPAT_11 # NetBSD 1.1 76 options COMPAT_12 # NetBSD 1.2 77 options COMPAT_13 # NetBSD 1.3 78 options COMPAT_14 # NetBSD 1.4 79 options COMPAT_15 # NetBSD 1.5 80 options COMPAT_16 # NetBSD 1.6 81 options COMPAT_20 # NetBSD 2.0 82 options COMPAT_30 # NetBSD 3.0 83 options COMPAT_40 # NetBSD 4.0 compatibility. 84 options COMPAT_50 # NetBSD 5.0 compatibility. 85 86 #options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 87 88 options COMPAT_M68K4K # compatibility with NetBSD/m68k4k binaries 89 options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8, 90 options COMPAT_SUNOS # can run SunOS 4.1.1 executables 91 #options COMPAT_SVR4 # can run SVR4 executables 92 #options COMPAT_LINUX # can run Linux/m68k executables 93 options COMPAT_AOUT_M68K # support for NetBSD a.out executables 94 options EXEC_AOUT # support for a.out executables 95 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 96 97 # File systems 98 file-system FFS # UFS 99 #file-system EXT2FS # second extended file system (linux) 100 #file-system LFS # log-structured file system 101 file-system MFS # memory file system 102 file-system NFS # Network File System client 103 #file-system CD9660 # ISO 9660 + Rock Ridge file system 104 #file-system MSDOSFS # MS-DOS file system 105 file-system FDESC # /dev/fd 106 file-system KERNFS # /kern 107 file-system NULLFS # loopback file system 108 file-system OVERLAY # overlay file system 109 file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs) 110 file-system PROCFS # /proc 111 file-system UMAPFS # NULLFS + uid and gid remapping 112 file-system UNION # union file system 113 file-system PTYFS # /dev/pts/N support 114 file-system TMPFS # Efficient memory file-system 115 #file-system UDF # experimental - OSTA UDF CD/DVD file-system 116 117 options NFSSERVER # nfs server support 118 #options QUOTA # legacy UFS quotas 119 #options QUOTA2 # new, in-filesystem UFS quotas 120 options WAPBL # File system journaling support 121 #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 122 options FFS_NO_SNAPSHOT # No FFS snapshot support 123 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 124 # immutable) behave as system flags. 125 126 # Networking options 127 options GATEWAY # packet forwarding 128 options INET # IP + ICMP + TCP + UDP 129 options INET6 # IPV6 130 #options IPSEC # IP security 131 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 132 #options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 133 #options IPSEC_DEBUG # debug for IP security 134 #options MROUTING # IP multicast routing 135 #options PIM # Protocol Independent Multicast 136 #options ISO,TPIP # OSI 137 #options EON # OSI tunneling over IP 138 #options NETATALK # AppleTalk networking protocols 139 options PPP_BSDCOMP # BSD-Compress compression support for PPP 140 options PPP_DEFLATE # Deflate compression support for PPP 141 options PPP_FILTER # Active filter support for PPP (requires bpf) 142 options PFIL_HOOKS # pfil(9) packet filter hooks 143 options IPFILTER_LOG # ipmon(8) log support 144 options IPFILTER_LOOKUP # ippool(8) support 145 options IPFILTER_COMPAT # Compat for IP-Filter 146 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 147 #options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 148 149 #options ALTQ # Manipulate network interfaces' output queues 150 #options ALTQ_BLUE # Stochastic Fair Blue 151 #options ALTQ_CBQ # Class-Based Queueing 152 #options ALTQ_CDNR # Diffserv Traffic Conditioner 153 #options ALTQ_FIFOQ # First-In First-Out Queue 154 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 155 #options ALTQ_HFSC # Hierarchical Fair Service Curve 156 #options ALTQ_LOCALQ # Local queueing discipline 157 #options ALTQ_PRIQ # Priority Queueing 158 #options ALTQ_RED # Random Early Detection 159 #options ALTQ_RIO # RED with IN/OUT 160 #options ALTQ_WFQ # Weighted Fair Queueing 161 162 # NeXT specific options 163 options M68040 164 options M68030 165 options FPSP 166 #options FPU_EMULATE 167 168 options ZS_CONSOLE_ABORT # drop to debugger on break 169 #options SERCONSOLE # use serial console 170 171 options NFS_BOOT_BOOTP 172 options NFS_BOOT_DHCP 173 174 # wscons options 175 options RCONS_2BPP # necessary for nextdisplay 176 options RCONS_16BPP # necessary for color nextdisplay 177 #options WSEMUL_SUN # sun terminal emulation 178 options WSEMUL_VT100 # VT100 / VT220 emulation 179 options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 180 options WSDISPLAY_COMPAT_USL # wsconscfg VT handling 181 options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 182 # see dev/wskbdmap_next.h for implemented layouts 183 #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 184 185 config netbsd root on ? type ? 186 187 # 188 # Device configuration 189 # 190 191 # The root node: 192 mainbus0 at root 193 194 #fpu0 at mainbus? 195 196 # device space 197 intio0 at mainbus? 198 199 nextkbd0 at intio? ipl 3 200 nextdisplay0 at mainbus? 201 202 wsdisplay* at nextdisplay? console ? 203 wskbd* at nextkbd? console ? 204 205 # INTIO 206 nextdma* at intio? ipl 6 207 208 zsc0 at intio? ipl 5 209 #zsc1 at intio? ipl 5 210 211 xe* at intio? ipl 3 # ethernet 212 213 esp0 at intio? ipl 3 flags 0xffff00 # Turn off sync negotiation 214 215 # 216 # Serial ports 217 # 218 zstty0 at zsc0 channel 0 # ttya 219 zstty1 at zsc0 channel 1 # ttyb 220 221 # SCSI bus support 222 scsibus* at scsi? 223 224 # SCSI devices 225 sd* at scsibus? target ? lun ? # SCSI disk drives 226 st* at scsibus? target ? lun ? # SCSI tape drives 227 cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 228 ch* at scsibus? target ? lun ? # SCSI autochangers 229 se* at scsibus? target ? lun ? # SCSI ethernet 230 ss* at scsibus? target ? lun ? # SCSI scanners 231 uk* at scsibus? target ? lun ? # SCSI unknown 232 233 234 # Memory-disk drivers 235 pseudo-device md 236 237 # 238 # accept filters 239 pseudo-device accf_data # "dataready" accept filter 240 pseudo-device accf_http # "httpready" accept filter 241 242 # Misc. 243 pseudo-device loop 1 # network loopback 244 pseudo-device bpfilter # packet filter 245 #pseudo-device carp # Common Address Redundancy Protocol 246 pseudo-device sl # CSLIP 247 pseudo-device ppp # PPP 248 pseudo-device pppoe # PPP over Ethernet (RFC 2516) 249 pseudo-device tun # network tunneling over tty 250 pseudo-device tap # virtual Ethernet 251 #pseudo-device gre # generic L3 over IP tunnel 252 pseudo-device ipfilter # ip filter 253 pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 254 #pseudo-device faith # IPv[46] tcp relay translation i/f 255 pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 256 pseudo-device vlan # IEEE 802.1q encapsulation 257 pseudo-device bridge # simple inter-network bridging 258 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 259 pseudo-device agr # IEEE 802.3ad link aggregation 260 #pseudo-device wsmux # mouse & keyboard multiplexor 261 262 pseudo-device pty # pseudo-terminals 263 pseudo-device vnd # paging to files 264 #options VND_COMPRESSION # compressed vnd(4) 265 #pseudo-device raid 8 # RAIDframe disk driver 266 #options RAID_AUTOCONFIG # auto-configuration of RAID components 267 # Options to enable various other RAIDframe RAID types. 268 # options RF_INCLUDE_EVENODD=1 269 # options RF_INCLUDE_RAID5_RS=1 270 # options RF_INCLUDE_PARITYLOGGING=1 271 # options RF_INCLUDE_CHAINDECLUSTER=1 272 # options RF_INCLUDE_INTERDECLUSTER=1 273 # options RF_INCLUDE_PARITY_DECLUSTERING=1 274 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 275 pseudo-device fss # file system snapshot device 276 pseudo-device ccd 4 # concatenated disks 277 pseudo-device clockctl # user control of clock subsystem 278 pseudo-device ksyms # /dev/ksyms 279 #pseudo-device pf # PF packet filter 280 #pseudo-device pflog # PF log if 281 pseudo-device putter # for puffs and pud 282 283 # Veriexec 284 # 285 # a pseudo device needed for veriexec 286 #pseudo-device veriexec 1 287 # 288 # Uncomment the fingerprint methods below that are desired. Note that 289 # removing fingerprint methods will have almost no impact on the kernel 290 # code size. 291 # 292 #options VERIFIED_EXEC_FP_RMD160 293 #options VERIFIED_EXEC_FP_SHA256 294 #options VERIFIED_EXEC_FP_SHA384 295 #options VERIFIED_EXEC_FP_SHA512 296 #options VERIFIED_EXEC_FP_SHA1 297 #options VERIFIED_EXEC_FP_MD5 298
Indexes created Thu Oct 02 10:09:58 GMT 2025