GENERIC revision 1.129
1# $NetBSD: GENERIC,v 1.129 2013/03/01 18:25:50 joerg Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/next68k/conf/std.next68k" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#ident "GENERIC-$Revision: 1.129 $" 26 27# Needs to be set per system. i.e change these as you see fit 28maxusers 16 29 30# Standard system options 31options KTRACE # system call tracing 32options SYSVMSG # System V message queues 33options SYSVSEM # System V semaphores 34#options SEMMNI=10 # number of semaphore identifiers 35#options SEMMNS=60 # number of semaphores in system 36#options SEMUME=10 # max number of undo entries per process 37#options SEMMNU=30 # number of undo structures in system 38options SYSVSHM # System V shared memory 39 40options INSECURE # disable kernel security level 41options USERCONF # userconf(4) support 42#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 43options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 44 45# Enable experimental buffer queue strategy for better responsiveness under 46# high disk I/O load. Use it with caution - it's not proven to be stable yet. 47#options BUFQ_READPRIO 48#options BUFQ_PRIOCSCAN 49 50#options DEBUG # kernel debugging code 51#options DIAGNOSTIC # extra kernel sanity checking 52 53# Which kernel debugger? Uncomment either this: 54options DDB 55options DDB_HISTORY_SIZE=100 # enable history editing in DDB 56 57# ... or these for KGDB (gdb remote target) 58#makeoptions DEBUG="-g" # debugging symbols for gdb 59#options KGDB # support for kernel gdb 60#options KGDB_DEV=0xc01 # kgdb device number (dev_t) 61#options KGDB_DEVRATE=9600 # baud rate 62 63# Other debugging options 64options KMEMSTATS # kernel memory statistics (vmstat -m) 65#options PMAP_DEBUG 66options SCSIDEBUG 67options SCSIVERBOSE # Verbose SCSI errors 68options SWAPDEBUG 69 70# Compatibility options 71options COMPAT_43 # and 4.3BSD and ... 72options COMPAT_44 # and 4.4BSD and ... 73options COMPAT_09 # NetBSD 0.9 74options COMPAT_10 # NetBSD 1.0 75options COMPAT_11 # NetBSD 1.1 76options COMPAT_12 # NetBSD 1.2 77options COMPAT_13 # NetBSD 1.3 78options COMPAT_14 # NetBSD 1.4 79options COMPAT_15 # NetBSD 1.5 80options COMPAT_16 # NetBSD 1.6 81options COMPAT_20 # NetBSD 2.0 82options COMPAT_30 # NetBSD 3.0 83options COMPAT_40 # NetBSD 4.0 compatibility. 84options COMPAT_50 # NetBSD 5.0 compatibility. 85options COMPAT_60 # NetBSD 6.0 compatibility. 86 87#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 88 89options COMPAT_M68K4K # compatibility with NetBSD/m68k4k binaries 90options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8, 91options COMPAT_SUNOS # can run SunOS 4.1.1 executables 92#options COMPAT_SVR4 # can run SVR4 executables 93#options COMPAT_LINUX # can run Linux/m68k executables 94options COMPAT_AOUT_M68K # support for NetBSD a.out executables 95options EXEC_AOUT # support for a.out executables 96options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 97 98# File systems 99file-system FFS # UFS 100#file-system EXT2FS # second extended file system (linux) 101#file-system LFS # log-structured file system 102file-system MFS # memory file system 103file-system NFS # Network File System client 104#file-system CD9660 # ISO 9660 + Rock Ridge file system 105#file-system MSDOSFS # MS-DOS file system 106file-system FDESC # /dev/fd 107file-system KERNFS # /kern 108file-system NULLFS # loopback file system 109file-system OVERLAY # overlay file system 110file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs) 111file-system PROCFS # /proc 112file-system UMAPFS # NULLFS + uid and gid remapping 113file-system UNION # union file system 114file-system PTYFS # /dev/pts/N support 115file-system TMPFS # Efficient memory file-system 116#file-system UDF # experimental - OSTA UDF CD/DVD file-system 117 118options NFSSERVER # nfs server support 119#options QUOTA # legacy UFS quotas 120#options QUOTA2 # new, in-filesystem UFS quotas 121options WAPBL # File system journaling support 122#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 123options FFS_NO_SNAPSHOT # No FFS snapshot support 124#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 125 # immutable) behave as system flags. 126 127# Networking options 128options GATEWAY # packet forwarding 129options INET # IP + ICMP + TCP + UDP 130options INET6 # IPV6 131#options IPSEC # IP security 132#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 133#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 134#options IPSEC_DEBUG # debug for IP security 135#options MROUTING # IP multicast routing 136#options PIM # Protocol Independent Multicast 137#options NETATALK # AppleTalk networking protocols 138options PPP_BSDCOMP # BSD-Compress compression support for PPP 139options PPP_DEFLATE # Deflate compression support for PPP 140options PPP_FILTER # Active filter support for PPP (requires bpf) 141options PFIL_HOOKS # pfil(9) packet filter hooks 142options IPFILTER_LOG # ipmon(8) log support 143options IPFILTER_LOOKUP # ippool(8) support 144options IPFILTER_COMPAT # Compat for IP-Filter 145#options IPFILTER_DEFAULT_BLOCK # block all packets by default 146#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 147 148#options ALTQ # Manipulate network interfaces' output queues 149#options ALTQ_BLUE # Stochastic Fair Blue 150#options ALTQ_CBQ # Class-Based Queueing 151#options ALTQ_CDNR # Diffserv Traffic Conditioner 152#options ALTQ_FIFOQ # First-In First-Out Queue 153#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 154#options ALTQ_HFSC # Hierarchical Fair Service Curve 155#options ALTQ_LOCALQ # Local queueing discipline 156#options ALTQ_PRIQ # Priority Queueing 157#options ALTQ_RED # Random Early Detection 158#options ALTQ_RIO # RED with IN/OUT 159#options ALTQ_WFQ # Weighted Fair Queueing 160 161# NeXT specific options 162options M68040 163options M68030 164options FPSP 165#options FPU_EMULATE 166 167options ZS_CONSOLE_ABORT # drop to debugger on break 168#options SERCONSOLE # use serial console 169 170options NFS_BOOT_BOOTP 171options NFS_BOOT_DHCP 172 173# wscons options 174options RCONS_2BPP # necessary for nextdisplay 175options RCONS_16BPP # necessary for color nextdisplay 176#options WSEMUL_SUN # sun terminal emulation 177options WSEMUL_VT100 # VT100 / VT220 emulation 178options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 179options WSDISPLAY_COMPAT_USL # wsconscfg VT handling 180options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 181# see dev/wskbdmap_next.h for implemented layouts 182#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 183 184config netbsd root on ? type ? 185 186# 187# Device configuration 188# 189 190# The root node: 191mainbus0 at root 192 193#fpu0 at mainbus? 194 195# device space 196intio0 at mainbus? 197 198nextkbd0 at intio? ipl 3 199nextdisplay0 at mainbus? 200 201wsdisplay* at nextdisplay? console ? 202wskbd* at nextkbd? console ? 203 204# INTIO 205nextdma* at intio? ipl 6 206 207zsc0 at intio? ipl 5 208#zsc1 at intio? ipl 5 209 210xe* at intio? ipl 3 # ethernet 211 212esp0 at intio? ipl 3 flags 0xffff00 # Turn off sync negotiation 213 214# 215# Serial ports 216# 217zstty0 at zsc0 channel 0 # ttya 218zstty1 at zsc0 channel 1 # ttyb 219 220# SCSI bus support 221scsibus* at scsi? 222 223# SCSI devices 224sd* at scsibus? target ? lun ? # SCSI disk drives 225st* at scsibus? target ? lun ? # SCSI tape drives 226cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 227ch* at scsibus? target ? lun ? # SCSI autochangers 228se* at scsibus? target ? lun ? # SCSI ethernet 229ss* at scsibus? target ? lun ? # SCSI scanners 230uk* at scsibus? target ? lun ? # SCSI unknown 231 232 233# Memory-disk drivers 234pseudo-device md 235 236# 237# accept filters 238pseudo-device accf_data # "dataready" accept filter 239pseudo-device accf_http # "httpready" accept filter 240 241# Misc. 242pseudo-device loop 1 # network loopback 243pseudo-device bpfilter # packet filter 244#pseudo-device carp # Common Address Redundancy Protocol 245pseudo-device sl # CSLIP 246pseudo-device ppp # PPP 247pseudo-device pppoe # PPP over Ethernet (RFC 2516) 248pseudo-device tun # network tunneling over tty 249pseudo-device tap # virtual Ethernet 250#pseudo-device gre # generic L3 over IP tunnel 251pseudo-device ipfilter # ip filter 252pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 253#pseudo-device faith # IPv[46] tcp relay translation i/f 254pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 255pseudo-device vlan # IEEE 802.1q encapsulation 256pseudo-device bridge # simple inter-network bridging 257#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 258pseudo-device agr # IEEE 802.3ad link aggregation 259#pseudo-device wsmux # mouse & keyboard multiplexor 260 261pseudo-device pty # pseudo-terminals 262pseudo-device vnd # paging to files 263#options VND_COMPRESSION # compressed vnd(4) 264#pseudo-device raid 8 # RAIDframe disk driver 265#options RAID_AUTOCONFIG # auto-configuration of RAID components 266# Options to enable various other RAIDframe RAID types. 267# options RF_INCLUDE_EVENODD=1 268# options RF_INCLUDE_RAID5_RS=1 269# options RF_INCLUDE_PARITYLOGGING=1 270# options RF_INCLUDE_CHAINDECLUSTER=1 271# options RF_INCLUDE_INTERDECLUSTER=1 272# options RF_INCLUDE_PARITY_DECLUSTERING=1 273# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 274pseudo-device fss # file system snapshot device 275pseudo-device ccd 4 # concatenated disks 276pseudo-device clockctl # user control of clock subsystem 277pseudo-device ksyms # /dev/ksyms 278#pseudo-device pf # PF packet filter 279#pseudo-device pflog # PF log if 280pseudo-device putter # for puffs and pud 281 282# Veriexec 283# 284# a pseudo device needed for veriexec 285#pseudo-device veriexec 1 286# 287# Uncomment the fingerprint methods below that are desired. Note that 288# removing fingerprint methods will have almost no impact on the kernel 289# code size. 290# 291#options VERIFIED_EXEC_FP_RMD160 292#options VERIFIED_EXEC_FP_SHA256 293#options VERIFIED_EXEC_FP_SHA384 294#options VERIFIED_EXEC_FP_SHA512 295#options VERIFIED_EXEC_FP_SHA1 296#options VERIFIED_EXEC_FP_MD5 297