GENERIC revision 1.152
1# $NetBSD: GENERIC,v 1.152 2021/01/21 06:51:55 nia Exp $
2#
3# GENERIC machine description file
4# 
5# This machine description file is used to generate the default NetBSD
6# kernel.  The generic kernel does not include all options, subsystems
7# and device drivers, but should be useful for most applications.
8#
9# The machine description file can be customised for your specific
10# machine to reduce the kernel size and improve its performance.
11#
12# For further information on compiling NetBSD kernels, see the config(8)
13# man page.
14#
15# For further information on hardware support for this architecture, see
16# the intro(4) man page.  For further information about kernel options
17# for this architecture, see the options(4) man page.  For an explanation
18# of each device driver in this file see the section 4 man page for the
19# device.
20
21include 	"arch/next68k/conf/std.next68k"
22
23options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
24
25#ident 		"GENERIC-$Revision: 1.152 $"
26
27makeoptions	COPTS="-O2 -fno-reorder-blocks -fno-omit-frame-pointer"
28	# See share/mk/sys.mk. -fno-omit-frame-pointer is necessary for
29	# backtraces in DDB.
30
31# Needs to be set per system.  i.e change these as you see fit
32maxusers	16
33
34# Standard system options
35options 	KTRACE		# system call tracing
36options 	SYSVMSG		# System V message queues
37options 	SYSVSEM		# System V semaphores
38#options 	SEMMNI=10	# number of semaphore identifiers
39#options 	SEMMNS=60	# number of semaphores in system
40#options 	SEMUME=10	# max number of undo entries per process
41#options 	SEMMNU=30	# number of undo structures in system
42options 	SYSVSHM		# System V shared memory
43
44options 	INSECURE	# disable kernel security level
45options 	USERCONF	# userconf(4) support
46#options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
47options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
48
49# Alternate buffer queue strategies for better responsiveness under high
50# disk I/O load.
51#options 	BUFQ_READPRIO
52options 	BUFQ_PRIOCSCAN
53
54#options 	DEBUG		# kernel debugging code
55#options 	DIAGNOSTIC	# extra kernel sanity checking
56
57# Which kernel debugger?  Uncomment either this:
58options 	DDB
59options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
60
61# ... or these for KGDB (gdb remote target)
62#makeoptions	DEBUG="-g"		# debugging symbols for gdb
63#options 	KGDB			# support for kernel gdb
64#options 	KGDB_DEV=0xc01		# kgdb device number (dev_t)
65#options 	KGDB_DEVRATE=9600	# baud rate
66
67# Other debugging options
68#options 	PMAP_DEBUG
69options 	SCSIDEBUG
70options 	SCSIVERBOSE		# Verbose SCSI errors
71options 	SWAPDEBUG
72
73# Compatibility options
74include 	"conf/compat_netbsd09.config"
75
76options 	COMPAT_M68K4K	# compatibility with NetBSD/m68k4k binaries
77options 	COMPAT_NOMID	# compatibility with 386BSD, BSDI, NetBSD 0.8,
78options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
79#options 	COMPAT_LINUX	# can run Linux/m68k executables
80#options 	COMPAT_OSSAUDIO	# can run Linux/m68k executables
81options 	COMPAT_AOUT_M68K # support for NetBSD a.out executables
82options 	EXEC_AOUT	# support for a.out executables
83
84# File systems
85file-system 	FFS		# UFS
86#file-system 	EXT2FS		# second extended file system (linux)
87#file-system 	LFS		# log-structured file system
88file-system 	MFS		# memory file system
89file-system 	NFS		# Network File System client
90#file-system 	CD9660		# ISO 9660 + Rock Ridge file system
91#file-system 	MSDOSFS		# MS-DOS file system
92file-system 	FDESC		# /dev/fd
93file-system 	KERNFS		# /kern
94file-system 	NULLFS		# loopback file system
95file-system 	OVERLAY		# overlay file system
96file-system	PUFFS		# Userspace file systems (e.g. ntfs-3g & sshfs)
97file-system 	PROCFS		# /proc
98file-system 	UMAPFS		# NULLFS + uid and gid remapping
99file-system 	UNION		# union file system
100file-system	PTYFS		# /dev/pts/N support
101file-system	TMPFS		# Efficient memory file-system
102#file-system	UDF		# experimental - OSTA UDF CD/DVD file-system
103
104options 	NFSSERVER	# nfs server support
105#options 	QUOTA		# legacy UFS quotas
106#options 	QUOTA2		# new, in-filesystem UFS quotas
107options 	WAPBL		# File system journaling support
108#options	UFS_DIRHASH	# UFS Large Directory Hashing - Experimental
109options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
110#options 	UFS_EXTATTR	# Extended attribute support for UFS1
111#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
112				# immutable) behave as system flags.
113
114# Networking options
115options 	GATEWAY		# packet forwarding
116options 	INET		# IP + ICMP + TCP + UDP
117options 	INET6		# IPV6
118#options 	IPSEC		# IP security
119#options 	IPSEC_DEBUG	# debug for IP security
120#options 	MROUTING	# IP multicast routing
121#options 	PIM		# Protocol Independent Multicast
122#options 	NETATALK	# AppleTalk networking protocols
123options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
124options 	PPP_DEFLATE	# Deflate compression support for PPP
125options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
126#options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
127
128#options 	ALTQ		# Manipulate network interfaces' output queues
129#options 	ALTQ_BLUE	# Stochastic Fair Blue
130#options 	ALTQ_CBQ	# Class-Based Queueing
131#options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
132#options 	ALTQ_FIFOQ	# First-In First-Out Queue
133#options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
134#options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
135#options 	ALTQ_LOCALQ	# Local queueing discipline
136#options 	ALTQ_PRIQ	# Priority Queueing
137#options 	ALTQ_RED	# Random Early Detection
138#options 	ALTQ_RIO	# RED with IN/OUT
139#options 	ALTQ_WFQ	# Weighted Fair Queueing
140
141# NeXT specific options
142options 	M68040
143options 	M68030
144options 	FPSP
145#options 	FPU_EMULATE
146
147options 	ZS_CONSOLE_ABORT	# drop to debugger on break
148#options 	SERCONSOLE		# use serial console
149
150options 	NFS_BOOT_BOOTP
151options 	NFS_BOOT_DHCP
152
153# wscons options
154options 	RCONS_2BPP		# necessary for nextdisplay
155options 	RCONS_16BPP		# necessary for color nextdisplay
156#options 	WSEMUL_SUN		# sun terminal emulation
157options 	WSEMUL_VT100		# VT100 / VT220 emulation
158options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
159options 	WSDISPLAY_COMPAT_USL		# wsconscfg VT handling
160options 	WSDISPLAY_COMPAT_RAWKBD	# can get raw scancodes
161# see dev/wskbdmap_next.h for implemented layouts
162#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
163
164config		netbsd root on ? type ?
165
166#
167# Device configuration
168#
169
170# The root node:
171mainbus0 at root
172
173#fpu0 at mainbus?
174
175# device space
176intio0	at mainbus?
177
178nextkbd0	at intio? ipl 3
179nextdisplay0	at mainbus?
180
181wsdisplay*	at nextdisplay? console ?
182wskbd*		at nextkbd? console ?
183
184# INTIO
185nextdma*	at intio? ipl 6
186
187zsc0	at intio? ipl 5
188#zsc1	at intio? ipl 5
189
190xe*	at intio? ipl 3			# ethernet
191
192esp0	at intio? ipl 3	flags 0xffff00	# Turn off sync negotiation
193
194#
195# Serial ports
196#
197zstty0	at zsc0 channel 0	# Serial Port A
198zstty1	at zsc0 channel 1	# Serial Port B
199
200# SCSI bus support
201scsibus* at scsi?
202
203# SCSI devices
204sd*	at scsibus? target ? lun ?	# SCSI disk drives
205st*	at scsibus? target ? lun ?	# SCSI tape drives
206cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
207ch*	at scsibus? target ? lun ?	# SCSI autochangers
208se*	at scsibus? target ? lun ?	# SCSI ethernet
209ss*	at scsibus? target ? lun ?	# SCSI scanners
210uk*	at scsibus? target ? lun ?	# SCSI unknown
211
212
213# Memory-disk drivers
214pseudo-device	md		
215
216#
217# accept filters
218pseudo-device   accf_data		# "dataready" accept filter
219pseudo-device   accf_http		# "httpready" accept filter
220
221# Misc.
222pseudo-device	loop			# network loopback
223pseudo-device	bpfilter		# packet filter
224pseudo-device	carp			# Common Address Redundancy Protocol
225pseudo-device	sl			# CSLIP
226pseudo-device	ppp			# PPP
227pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
228pseudo-device	tun			# network tunneling over tty
229pseudo-device	tap			# virtual Ethernet
230#pseudo-device	gre			# generic L3 over IP tunnel
231pseudo-device	npf			# NPF packet filter
232pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
233#pseudo-device	faith			# IPv[46] tcp relay translation i/f
234pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
235pseudo-device	vlan			# IEEE 802.1q encapsulation
236pseudo-device	bridge			# simple inter-network bridging
237pseudo-device	vether			# Virtual Ethernet for bridge
238pseudo-device	agr			# IEEE 802.3ad link aggregation
239#pseudo-device	wsmux			# mouse & keyboard multiplexor
240
241pseudo-device	pty			# pseudo-terminals
242pseudo-device	vnd			# paging to files
243#options 	VND_COMPRESSION		# compressed vnd(4)
244#pseudo-device	raid			# RAIDframe disk driver
245#options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
246# Options to enable various other RAIDframe RAID types.
247# options	RF_INCLUDE_EVENODD=1
248# options	RF_INCLUDE_RAID5_RS=1
249# options	RF_INCLUDE_PARITYLOGGING=1
250# options	RF_INCLUDE_CHAINDECLUSTER=1
251# options	RF_INCLUDE_INTERDECLUSTER=1
252# options 	RF_INCLUDE_PARITY_DECLUSTERING=1
253# options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
254pseudo-device	fss			# file system snapshot device
255pseudo-device	ccd			# concatenated disks
256pseudo-device	clockctl		# user control of clock subsystem
257pseudo-device	ksyms			# /dev/ksyms
258pseudo-device	putter			# for puffs and pud
259
260include "dev/veriexec.config"
261