OpenGrok

# $NetBSD: GENERIC,v 1.16 1999/07/20 07:40:36 christos Exp $
#
# GENERIC next68k
#
#

include "arch/next68k/conf/std.next68k"

# Needs to be set per system.  i.e change these as you see fit
maxusers	16

# Standard system options
options 	KTRACE		# system call tracing
options 	SYSVMSG		# System V message queues
options 	SYSVSEM		# System V semaphores
options 	SYSVSHM		# System V shared memory
#options 	SHMMAXPGS=1024	# 1024 pages is the default

options 	LKM		# loadable kernel modules
options 	INSECURE	# disable kernel security level
options 	UCONSOLE	# Allow non-root TIOCCONS

# Which kernel debugger?  Uncomment either this:
options 	DDB
options 	DEBUG		# kernel debugging code
options 	DIAGNOSTIC	# extra kernel sanity checking
options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB

# ... or these for KGDB (gdb remote target)
#makeoptions DEBUG="-g"		# debugging symbols for gdb
#options 	KGDB		# support for kernel gdb
#options 	KGDBDEV=0xc01	# kgdb device number (dev_t)
#options 	KGDBRATE=0x2580	# baud rate

# Other debugging options
options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
#options 	PMAP_DEBUG
options 	SCSIDEBUG
options 	SCSIVERBOSE		# Verbose SCSI errors
options         SWAPDEBUG

# Compatability options
options 	COMPAT_43	# and 4.3BSD and ...
options 	COMPAT_44	# and 4.4BSD and ...
options 	COMPAT_09	# NetBSD 0.9
options 	COMPAT_10	# NetBSD 1.0
options 	COMPAT_11	# NetBSD 1.1
options 	COMPAT_12	# NetBSD 1.2
options 	COMPAT_13	# NetBSD 1.3

# @@ COMPAT_M68K4K doesn't compile because my egcs cross compiler isn't defining __m68k__
#   I don't know whether the compiler is broken or whether
#    /sys/compat/m68k4k/m68k4k_exec.c should be updated.  -- dbj
#options 	COMPAT_M68K4K	# compatibility with NetBSD/m68k4k binaries
options 	COMPAT_NOMID	# compatibility with 386BSD, BSDI, NetBSD 0.8,
options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
#options 	COMPAT_SVR4	# can run SVR4 executables
#options 	COMPAT_LINUX	# can run Linux/m68k executables
#options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)

# File systems
#file-system 	FFS		# UFS
#file-system 	EXT2FS		# second extended file system (linux)
#file-system 	LFS		# log-structured file system
file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
#file-system 	CD9660		# ISO 9660 + Rock Ridge file system
#file-system 	MSDOSFS		# MS-DOS file system
file-system 	FDESC		# /dev/fd
file-system 	KERNFS		# /kern
file-system 	NULLFS		# loopback file system
file-system 	PORTAL		# portal filesystem (still experimental)
file-system 	PROCFS		# /proc
file-system 	UMAPFS		# NULLFS + uid and gid remapping
file-system 	UNION		# union file system

options 	NFSSERVER	# nfs server support
options 	QUOTA		# FFS quotas
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
				# immutable) behave as system flags.

# Networking options
options 	GATEWAY		# packet forwarding
options 	INET		# IP + ICMP + TCP + UDP
#options 	MROUTING	# IP multicast routing
#options 	NS		# XNS
#options 	NSIP		# XNS tunneling over IP
#options 	ISO,TPIP	# OSI
#options 	EON		# OSI tunneling over IP
#options 	CCITT,LLC,HDLC	# X.25
#options 	NETATALK	# AppleTalk networking protocols
options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
options 	PPP_DEFLATE	# Deflate compression support for PPP
options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
options 	PFIL_HOOKS	# pfil(9) packet filter hooks

# Compatibility with 4.2BSD implementation of TCP/IP.  Not recommended.
#options 	TCP_COMPAT_42

# NeXT specific options
options 	M68040
options 	M68030
options 	FPSP
#options 	FPU_EMULATE

options         ZS_CONSOLE_ABORT
#options        SERCONSOLE

options 	NFS_BOOT_BOOTP
options 	NFS_BOOT_DHCP

# wscons options
options         RCONS_2BPP              # necessary for nextdisplay
#options 	WSEMUL_SUN		# sun terminal emulation
options 	WSEMUL_VT100		# VT100 / VT220 emulation
options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
options 	WSDISPLAY_COMPAT_USL		# VT handling
options 	WSDISPLAY_COMPAT_RAWKBD	# can get raw scancodes
# @@@ remove this once wsconscfg is working or something?
options         WSDISPLAY_DEFAULTSCREENS=1
# see dev/wskbdmap_next.h for implemented layouts
#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"

config		netbsd root on ? type ?

#
# Device configuration
#

# The root node:
mainbus0 at root

#fpu0 at mainbus?

# device space
intio0  at mainbus?

nextkbd0    at intio? ipl 3
nextdisplay0    at mainbus?

wsdisplay*      at nextdisplay? console ?
wskbd*          at nextkbd? console ?

# INTIO
zsc0    at intio? ipl 5
#zsc1    at intio? ipl 5

xe*     at intio? ipl 3         # ethernet

#esp0    at intio? ipl 3         flags 0xff00 # Turn off sync negotiation

#
# Serial ports
#
zstty0	at zsc0 channel 0	# ttya
zstty1	at zsc0 channel 1	# ttyb

# SCSI bus support
#scsibus* at scsi?

# SCSI devices
#sd*	at scsibus? target ? lun ?	# SCSI disk drives
#st*	at scsibus? target ? lun ?	# SCSI tape drives
#cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
#ch*	at scsibus? target ? lun ?	# SCSI autochangers
#se*	at scsibus? target ? lun ?	# SCSI ethernet
#ss*	at scsibus? target ? lun ?	# SCSI scanners
#uk*	at scsibus? target ? lun ?	# SCSI unknown


# Memory-disk drivers
pseudo-device	md		2

# Misc.
pseudo-device	loop		1	# network loopback
pseudo-device	bpfilter	8	# packet filter
pseudo-device	sl		2	# CSLIP
pseudo-device	ppp		2	# PPP
pseudo-device	tun		2	# network tunneling over tty
#pseudo-device	gre		2	# generic L3 over IP tunnel
pseudo-device	ipfilter		# ip filter
# rnd is EXPERIMENTAL
#pseudo-device	rnd			# /dev/random and in-kernel generator

pseudo-device	pty		64	# pseudo-terminals
pseudo-device	vnd		4	# paging to files
#pseudo-device	raid		4	# RAIDframe disk driver
pseudo-device	ccd		4	# concatenated disks