GENERIC revision 1.21
1# $NetBSD: GENERIC,v 1.21 1999/11/21 14:00:42 itojun Exp $
2#
3# GENERIC next68k
4#
5#
6
7include "arch/next68k/conf/std.next68k"
8
9# Needs to be set per system.  i.e change these as you see fit
10maxusers	16
11
12# Standard system options
13options 	KTRACE		# system call tracing
14options 	SYSVMSG		# System V message queues
15options 	SYSVSEM		# System V semaphores
16options 	SYSVSHM		# System V shared memory
17#options 	SHMMAXPGS=1024	# 1024 pages is the default
18
19options 	LKM		# loadable kernel modules
20options 	INSECURE	# disable kernel security level
21options 	UCONSOLE	# Allow non-root TIOCCONS
22
23# Which kernel debugger?  Uncomment either this:
24options 	DDB
25options 	DEBUG		# kernel debugging code
26options 	DIAGNOSTIC	# extra kernel sanity checking
27options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
28
29# ... or these for KGDB (gdb remote target)
30#makeoptions DEBUG="-g"		# debugging symbols for gdb
31#options 	KGDB		# support for kernel gdb
32#options 	KGDBDEV=0xc01	# kgdb device number (dev_t)
33#options 	KGDBRATE=0x2580	# baud rate
34
35# Other debugging options
36options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
37#options 	PMAP_DEBUG
38options 	SCSIDEBUG
39options 	SCSIVERBOSE		# Verbose SCSI errors
40options         SWAPDEBUG
41
42# Compatability options
43options 	COMPAT_43	# and 4.3BSD and ...
44options 	COMPAT_44	# and 4.4BSD and ...
45options 	COMPAT_09	# NetBSD 0.9
46options 	COMPAT_10	# NetBSD 1.0
47options 	COMPAT_11	# NetBSD 1.1
48options 	COMPAT_12	# NetBSD 1.2
49options 	COMPAT_13	# NetBSD 1.3
50options 	COMPAT_14	# NetBSD 1.4
51
52# @@ COMPAT_M68K4K doesn't compile because my egcs cross compiler isn't defining __m68k__
53#   I don't know whether the compiler is broken or whether 
54#    /sys/compat/m68k4k/m68k4k_exec.c should be updated.  -- dbj
55#options 	COMPAT_M68K4K	# compatibility with NetBSD/m68k4k binaries
56options 	COMPAT_NOMID	# compatibility with 386BSD, BSDI, NetBSD 0.8,
57options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
58#options 	COMPAT_SVR4	# can run SVR4 executables
59#options 	COMPAT_LINUX	# can run Linux/m68k executables
60#options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
61
62# File systems
63#file-system 	FFS		# UFS
64#file-system 	EXT2FS		# second extended file system (linux)
65#file-system 	LFS		# log-structured file system
66file-system 	MFS		# memory file system
67file-system 	NFS		# Network File System client
68#file-system 	CD9660		# ISO 9660 + Rock Ridge file system
69#file-system 	MSDOSFS		# MS-DOS file system
70file-system 	FDESC		# /dev/fd
71file-system 	KERNFS		# /kern
72file-system 	NULLFS		# loopback file system
73file-system 	PORTAL		# portal filesystem (still experimental)
74file-system 	PROCFS		# /proc
75file-system 	UMAPFS		# NULLFS + uid and gid remapping
76file-system 	UNION		# union file system
77
78options 	NFSSERVER	# nfs server support
79options 	QUOTA		# FFS quotas
80#options 	SOFTDEP         # FFS soft updates support.
81#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
82				# immutable) behave as system flags.
83
84# Pull in config fragments for kernel crypto.  This is required for
85# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
86# one of these, based on whether you use crypto-us or crypto-intl, and
87# adjust the prefixes as necessary.
88
89#prefix ../crypto-us/sys
90#cinclude "conf/files.crypto-us"
91#prefix
92
93#prefix ../crypto-intl/sys
94#cinclude "conf/files.crypto-intl"
95#prefix
96
97# Networking options
98options 	GATEWAY		# packet forwarding
99options 	INET		# IP + ICMP + TCP + UDP
100options 	INET6		# IPV6
101#options 	IPSEC		# IP security
102#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
103#options 	IPSEC_DEBUG	# debug for IP security
104#options 	MROUTING	# IP multicast routing
105#options 	NS		# XNS
106#options 	NSIP		# XNS tunneling over IP
107#options 	ISO,TPIP	# OSI
108#options 	EON		# OSI tunneling over IP
109#options 	CCITT,LLC,HDLC	# X.25
110#options 	NETATALK	# AppleTalk networking protocols
111options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
112options 	PPP_DEFLATE	# Deflate compression support for PPP
113options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
114options 	PFIL_HOOKS	# pfil(9) packet filter hooks
115
116# Compatibility with 4.2BSD implementation of TCP/IP.  Not recommended.
117#options 	TCP_COMPAT_42
118
119# NeXT specific options
120options 	M68040
121options 	M68030
122options 	FPSP
123#options 	FPU_EMULATE
124
125options         ZS_CONSOLE_ABORT
126#options        SERCONSOLE
127
128options 	NFS_BOOT_BOOTP
129options 	NFS_BOOT_DHCP
130
131# wscons options
132options         RCONS_2BPP              # necessary for nextdisplay
133#options 	WSEMUL_SUN		# sun terminal emulation
134options 	WSEMUL_VT100		# VT100 / VT220 emulation
135options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
136options 	WSDISPLAY_COMPAT_USL		# VT handling
137options 	WSDISPLAY_COMPAT_RAWKBD	# can get raw scancodes
138# see dev/wskbdmap_next.h for implemented layouts
139#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
140
141config		netbsd root on ? type ?
142
143#
144# Device configuration
145#
146
147# The root node:
148mainbus0 at root
149
150#fpu0 at mainbus?
151
152# device space
153intio0  at mainbus?
154
155nextkbd0    at intio? ipl 3
156nextdisplay0    at mainbus?
157
158wsdisplay*      at nextdisplay? console ?
159wskbd*          at nextkbd? console ?
160
161# INTIO
162zsc0    at intio? ipl 5
163#zsc1    at intio? ipl 5
164
165xe*     at intio? ipl 3         # ethernet
166
167#esp0    at intio? ipl 3         flags 0xff00 # Turn off sync negotiation
168
169#
170# Serial ports
171#
172zstty0	at zsc0 channel 0	# ttya
173zstty1	at zsc0 channel 1	# ttyb
174
175# SCSI bus support
176#scsibus* at scsi?
177
178# SCSI devices
179#sd*	at scsibus? target ? lun ?	# SCSI disk drives
180#st*	at scsibus? target ? lun ?	# SCSI tape drives
181#cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
182#ch*	at scsibus? target ? lun ?	# SCSI autochangers
183#se*	at scsibus? target ? lun ?	# SCSI ethernet
184#ss*	at scsibus? target ? lun ?	# SCSI scanners
185#uk*	at scsibus? target ? lun ?	# SCSI unknown
186
187
188# Memory-disk drivers
189pseudo-device	md		2
190
191# Misc.
192pseudo-device	loop		1	# network loopback
193pseudo-device	bpfilter	8	# packet filter
194pseudo-device	sl		2	# CSLIP
195pseudo-device	ppp		2	# PPP
196pseudo-device	tun		2	# network tunneling over tty
197#pseudo-device	gre		2	# generic L3 over IP tunnel
198pseudo-device	ipfilter		# ip filter
199pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
200#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
201# rnd is EXPERIMENTAL
202#pseudo-device	rnd			# /dev/random and in-kernel generator
203#pseudo-device	wsmux		2	# mouse & keyboard multiplexor
204
205pseudo-device	pty		64	# pseudo-terminals
206pseudo-device	vnd		4	# paging to files
207#pseudo-device	raid		4	# RAIDframe disk driver
208pseudo-device	ccd		4	# concatenated disks
209