GENERIC revision 1.25 
1# $NetBSD: GENERIC,v 1.25 2000/02/26 17:35:40 oster Exp $
2#
3# GENERIC next68k
4#
5#
6
7include "arch/next68k/conf/std.next68k"
8
9#ident 		"GENERIC-$Revision: 1.25 $"
10
11# Needs to be set per system.  i.e change these as you see fit
12maxusers	16
13
14# Standard system options
15options 	KTRACE		# system call tracing
16options 	SYSVMSG		# System V message queues
17options 	SYSVSEM		# System V semaphores
18options 	SYSVSHM		# System V shared memory
19#options 	SHMMAXPGS=1024	# 1024 pages is the default
20
21options 	LKM		# loadable kernel modules
22options 	INSECURE	# disable kernel security level
23options 	UCONSOLE	# Allow non-root TIOCCONS
24
25options 	DEBUG		# kernel debugging code
26options 	DIAGNOSTIC	# extra kernel sanity checking
27
28# Which kernel debugger?  Uncomment either this:
29options 	DDB
30options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
31
32# ... or these for KGDB (gdb remote target)
33#makeoptions DEBUG="-g"		# debugging symbols for gdb
34#options 	KGDB		# support for kernel gdb
35#options 	KGDBDEV=0xc01	# kgdb device number (dev_t)
36#options 	KGDBRATE=0x2580	# baud rate
37
38# Other debugging options
39options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
40#options 	PMAP_DEBUG
41options 	SCSIDEBUG
42options 	SCSIVERBOSE		# Verbose SCSI errors
43options         SWAPDEBUG
44
45# Compatability options
46options 	COMPAT_43	# and 4.3BSD and ...
47options 	COMPAT_44	# and 4.4BSD and ...
48options 	COMPAT_09	# NetBSD 0.9
49options 	COMPAT_10	# NetBSD 1.0
50options 	COMPAT_11	# NetBSD 1.1
51options 	COMPAT_12	# NetBSD 1.2
52options 	COMPAT_13	# NetBSD 1.3
53options 	COMPAT_14	# NetBSD 1.4
54
55# @@ COMPAT_M68K4K doesn't compile because my egcs cross compiler isn't defining __m68k__
56#   I don't know whether the compiler is broken or whether 
57#    /sys/compat/m68k4k/m68k4k_exec.c should be updated.  -- dbj
58#options 	COMPAT_M68K4K	# compatibility with NetBSD/m68k4k binaries
59options 	COMPAT_NOMID	# compatibility with 386BSD, BSDI, NetBSD 0.8,
60options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
61#options 	COMPAT_SVR4	# can run SVR4 executables
62#options 	COMPAT_LINUX	# can run Linux/m68k executables
63#options 	EXEC_ELF32	# 32-bit ELF executables (Linux, SVR4)
64
65# File systems
66#file-system 	FFS		# UFS
67#file-system 	EXT2FS		# second extended file system (linux)
68#file-system 	LFS		# log-structured file system
69file-system 	MFS		# memory file system
70file-system 	NFS		# Network File System client
71#file-system 	CD9660		# ISO 9660 + Rock Ridge file system
72#file-system 	MSDOSFS		# MS-DOS file system
73file-system 	FDESC		# /dev/fd
74file-system 	KERNFS		# /kern
75file-system 	NULLFS		# loopback file system
76file-system 	OVERLAY		# overlay file system
77file-system 	PORTAL		# portal filesystem (still experimental)
78file-system 	PROCFS		# /proc
79file-system 	UMAPFS		# NULLFS + uid and gid remapping
80file-system 	UNION		# union file system
81
82options 	NFSSERVER	# nfs server support
83options 	QUOTA		# FFS quotas
84#options 	SOFTDEP         # FFS soft updates support.
85#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
86				# immutable) behave as system flags.
87
88# Pull in config fragments for kernel crypto.  This is required for
89# options IPSEC etc. to work. If you want to run with IPSEC, uncomment
90# one of these, based on whether you use crypto-us or crypto-intl, and
91# adjust the prefixes as necessary.
92
93#prefix ../crypto-us/sys
94#cinclude "conf/files.crypto-us"
95#prefix
96
97#prefix ../crypto-intl/sys
98#cinclude "conf/files.crypto-intl"
99#prefix
100
101# Networking options
102options 	GATEWAY		# packet forwarding
103options 	INET		# IP + ICMP + TCP + UDP
104options 	INET6		# IPV6
105#options 	IPSEC		# IP security
106#options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
107#options 	IPSEC_DEBUG	# debug for IP security
108#options 	MROUTING	# IP multicast routing
109#options 	NS		# XNS
110#options 	NSIP		# XNS tunneling over IP
111#options 	ISO,TPIP	# OSI
112#options 	EON		# OSI tunneling over IP
113#options 	CCITT,LLC,HDLC	# X.25
114#options 	NETATALK	# AppleTalk networking protocols
115options 	PPP_BSDCOMP	# BSD-Compress compression support for PPP
116options 	PPP_DEFLATE	# Deflate compression support for PPP
117options 	PPP_FILTER	# Active filter support for PPP (requires bpf)
118options 	PFIL_HOOKS	# pfil(9) packet filter hooks
119
120# Compatibility with 4.2BSD implementation of TCP/IP.  Not recommended.
121#options 	TCP_COMPAT_42
122
123# NeXT specific options
124options 	M68040
125options 	M68030
126options 	FPSP
127#options 	FPU_EMULATE
128
129options         ZS_CONSOLE_ABORT
130#options        SERCONSOLE
131
132options 	NFS_BOOT_BOOTP
133options 	NFS_BOOT_DHCP
134
135# wscons options
136options         RCONS_2BPP              # necessary for nextdisplay
137#options 	WSEMUL_SUN		# sun terminal emulation
138options 	WSEMUL_VT100		# VT100 / VT220 emulation
139options 	WSDISPLAY_COMPAT_SYSCONS	# emulate some ioctls
140options 	WSDISPLAY_COMPAT_USL		# VT handling
141options 	WSDISPLAY_COMPAT_RAWKBD	# can get raw scancodes
142# see dev/wskbdmap_next.h for implemented layouts
143#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
144
145config		netbsd root on ? type ?
146
147#
148# Device configuration
149#
150
151# The root node:
152mainbus0 at root
153
154#fpu0 at mainbus?
155
156# device space
157intio0  at mainbus?
158
159nextkbd0    at intio? ipl 3
160nextdisplay0    at mainbus?
161
162wsdisplay*      at nextdisplay? console ?
163wskbd*          at nextkbd? console ?
164
165# INTIO
166zsc0    at intio? ipl 5
167#zsc1    at intio? ipl 5
168
169xe*     at intio? ipl 3         # ethernet
170
171#esp0    at intio? ipl 3         flags 0xff00 # Turn off sync negotiation
172
173#
174# Serial ports
175#
176zstty0	at zsc0 channel 0	# ttya
177zstty1	at zsc0 channel 1	# ttyb
178
179# SCSI bus support
180#scsibus* at scsi?
181
182# SCSI devices
183#sd*	at scsibus? target ? lun ?	# SCSI disk drives
184#st*	at scsibus? target ? lun ?	# SCSI tape drives
185#cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives
186#ch*	at scsibus? target ? lun ?	# SCSI autochangers
187#se*	at scsibus? target ? lun ?	# SCSI ethernet
188#ss*	at scsibus? target ? lun ?	# SCSI scanners
189#uk*	at scsibus? target ? lun ?	# SCSI unknown
190
191
192# Memory-disk drivers
193pseudo-device	md		2
194
195# Misc.
196pseudo-device	loop		1	# network loopback
197pseudo-device	bpfilter	8	# packet filter
198pseudo-device	sl		2	# CSLIP
199pseudo-device	ppp		2	# PPP
200pseudo-device	tun		2	# network tunneling over tty
201#pseudo-device	gre		2	# generic L3 over IP tunnel
202pseudo-device	ipfilter		# ip filter
203pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
204#pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
205# rnd is EXPERIMENTAL
206#pseudo-device	rnd			# /dev/random and in-kernel generator
207#pseudo-device	wsmux		2	# mouse & keyboard multiplexor
208
209pseudo-device	pty		64	# pseudo-terminals
210pseudo-device	vnd		4	# paging to files
211#pseudo-device	raid		4	# RAIDframe disk driver
212#options	RAID_AUTOCONFIG		# auto-configuration of RAID components
213pseudo-device	ccd		4	# concatenated disks
214