GENERIC revision 1.27
1 # $NetBSD: GENERIC,v 1.27 2000/03/06 03:48:57 deberg Exp $ 2 # 3 # GENERIC next68k 4 # 5 # 6 7 include "arch/next68k/conf/std.next68k" 8 9 #ident "GENERIC-$Revision: 1.27 $" 10 11 # Needs to be set per system. i.e change these as you see fit 12 maxusers 16 13 14 # Standard system options 15 options KTRACE # system call tracing 16 options SYSVMSG # System V message queues 17 options SYSVSEM # System V semaphores 18 options SYSVSHM # System V shared memory 19 #options SHMMAXPGS=1024 # 1024 pages is the default 20 21 options LKM # loadable kernel modules 22 options INSECURE # disable kernel security level 23 options UCONSOLE # Allow non-root TIOCCONS 24 25 options DEBUG # kernel debugging code 26 options DIAGNOSTIC # extra kernel sanity checking 27 28 # Which kernel debugger? Uncomment either this: 29 options DDB 30 options DDB_HISTORY_SIZE=100 # enable history editing in DDB 31 32 # ... or these for KGDB (gdb remote target) 33 #makeoptions DEBUG="-g" # debugging symbols for gdb 34 #options KGDB # support for kernel gdb 35 #options KGDBDEV=0xc01 # kgdb device number (dev_t) 36 #options KGDBRATE=0x2580 # baud rate 37 38 # Other debugging options 39 options KMEMSTATS # kernel memory statistics (vmstat -m) 40 #options PMAP_DEBUG 41 options SCSIDEBUG 42 options SCSIVERBOSE # Verbose SCSI errors 43 options SWAPDEBUG 44 45 # Compatability options 46 options COMPAT_43 # and 4.3BSD and ... 47 options COMPAT_44 # and 4.4BSD and ... 48 options COMPAT_09 # NetBSD 0.9 49 options COMPAT_10 # NetBSD 1.0 50 options COMPAT_11 # NetBSD 1.1 51 options COMPAT_12 # NetBSD 1.2 52 options COMPAT_13 # NetBSD 1.3 53 options COMPAT_14 # NetBSD 1.4 54 55 # @@ COMPAT_M68K4K doesn't compile because my egcs cross compiler isn't defining __m68k__ 56 # I don't know whether the compiler is broken or whether 57 # /sys/compat/m68k4k/m68k4k_exec.c should be updated. -- dbj 58 #options COMPAT_M68K4K # compatibility with NetBSD/m68k4k binaries 59 options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8, 60 options COMPAT_SUNOS # can run SunOS 4.1.1 executables 61 #options COMPAT_SVR4 # can run SVR4 executables 62 #options COMPAT_LINUX # can run Linux/m68k executables 63 #options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 64 65 # File systems 66 #file-system FFS # UFS 67 #file-system EXT2FS # second extended file system (linux) 68 #file-system LFS # log-structured file system 69 file-system MFS # memory file system 70 file-system NFS # Network File System client 71 #file-system CD9660 # ISO 9660 + Rock Ridge file system 72 #file-system MSDOSFS # MS-DOS file system 73 file-system FDESC # /dev/fd 74 file-system KERNFS # /kern 75 file-system NULLFS # loopback file system 76 file-system OVERLAY # overlay file system 77 file-system PORTAL # portal filesystem (still experimental) 78 file-system PROCFS # /proc 79 file-system UMAPFS # NULLFS + uid and gid remapping 80 file-system UNION # union file system 81 82 options NFSSERVER # nfs server support 83 options QUOTA # FFS quotas 84 #options SOFTDEP # FFS soft updates support. 85 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 86 # immutable) behave as system flags. 87 88 # Pull in config fragments for kernel crypto. This is required for 89 # options IPSEC etc. to work. If you want to run with IPSEC, uncomment 90 # one of these, based on whether you use crypto-us or crypto-intl, and 91 # adjust the prefixes as necessary. 92 93 #prefix ../crypto-us/sys 94 #cinclude "conf/files.crypto-us" 95 #prefix 96 97 #prefix ../crypto-intl/sys 98 #cinclude "conf/files.crypto-intl" 99 #prefix 100 101 # Networking options 102 options GATEWAY # packet forwarding 103 options INET # IP + ICMP + TCP + UDP 104 options INET6 # IPV6 105 #options IPSEC # IP security 106 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 107 #options IPSEC_DEBUG # debug for IP security 108 #options MROUTING # IP multicast routing 109 #options NS # XNS 110 #options NSIP # XNS tunneling over IP 111 #options ISO,TPIP # OSI 112 #options EON # OSI tunneling over IP 113 #options CCITT,LLC,HDLC # X.25 114 #options NETATALK # AppleTalk networking protocols 115 options PPP_BSDCOMP # BSD-Compress compression support for PPP 116 options PPP_DEFLATE # Deflate compression support for PPP 117 options PPP_FILTER # Active filter support for PPP (requires bpf) 118 options PFIL_HOOKS # pfil(9) packet filter hooks 119 120 # Compatibility with 4.2BSD implementation of TCP/IP. Not recommended. 121 #options TCP_COMPAT_42 122 123 # NeXT specific options 124 options M68040 125 options M68030 126 options FPSP 127 #options FPU_EMULATE 128 129 options ZS_CONSOLE_ABORT # drop to debugger on break 130 #options SERCONSOLE # use serial console 131 132 options NFS_BOOT_BOOTP 133 options NFS_BOOT_DHCP 134 135 # wscons options 136 options RCONS_2BPP # necessary for nextdisplay 137 #options WSEMUL_SUN # sun terminal emulation 138 options WSEMUL_VT100 # VT100 / VT220 emulation 139 options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 140 options WSDISPLAY_COMPAT_USL # VT handling 141 options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 142 # see dev/wskbdmap_next.h for implemented layouts 143 #options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 144 145 config netbsd root on ? type ? 146 147 # 148 # Device configuration 149 # 150 151 # The root node: 152 mainbus0 at root 153 154 #fpu0 at mainbus? 155 156 # device space 157 intio0 at mainbus? 158 159 nextkbd0 at intio? ipl 3 160 nextdisplay0 at mainbus? 161 162 wsdisplay* at nextdisplay? console ? 163 wskbd* at nextkbd? console ? 164 165 # INTIO 166 zsc0 at intio? ipl 5 167 #zsc1 at intio? ipl 5 168 169 xe* at intio? ipl 3 # ethernet 170 171 #esp0 at intio? ipl 3 flags 0xff00 # Turn off sync negotiation 172 173 # 174 # Serial ports 175 # 176 zstty0 at zsc0 channel 0 # ttya 177 zstty1 at zsc0 channel 1 # ttyb 178 179 # SCSI bus support 180 #scsibus* at scsi? 181 182 # SCSI devices 183 #sd* at scsibus? target ? lun ? # SCSI disk drives 184 #st* at scsibus? target ? lun ? # SCSI tape drives 185 #cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 186 #ch* at scsibus? target ? lun ? # SCSI autochangers 187 #se* at scsibus? target ? lun ? # SCSI ethernet 188 #ss* at scsibus? target ? lun ? # SCSI scanners 189 #uk* at scsibus? target ? lun ? # SCSI unknown 190 191 192 # Memory-disk drivers 193 pseudo-device md 2 194 195 # Misc. 196 pseudo-device loop 1 # network loopback 197 pseudo-device bpfilter 8 # packet filter 198 pseudo-device sl 2 # CSLIP 199 pseudo-device ppp 2 # PPP 200 pseudo-device tun 2 # network tunneling over tty 201 #pseudo-device gre 2 # generic L3 over IP tunnel 202 pseudo-device ipfilter # ip filter 203 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 204 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 205 # rnd is EXPERIMENTAL 206 #pseudo-device rnd # /dev/random and in-kernel generator 207 #pseudo-device wsmux 2 # mouse & keyboard multiplexor 208 209 pseudo-device pty 64 # pseudo-terminals 210 pseudo-device vnd 4 # paging to files 211 #pseudo-device raid 4 # RAIDframe disk driver 212 #options RAID_AUTOCONFIG # auto-configuration of RAID components 213 pseudo-device ccd 4 # concatenated disks 214
Indexes created Thu Oct 02 10:09:58 GMT 2025