GENERIC revision 1.91
1# $NetBSD: GENERIC,v 1.91 2005/07/30 06:35:38 yamt Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21include "arch/next68k/conf/std.next68k" 22 23options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25#ident "GENERIC-$Revision: 1.91 $" 26 27# Needs to be set per system. i.e change these as you see fit 28maxusers 16 29 30# Standard system options 31options KTRACE # system call tracing 32options SYSTRACE # system call vetting via systrace(1) 33options SYSVMSG # System V message queues 34options SYSVSEM # System V semaphores 35#options SEMMNI=10 # number of semaphore identifiers 36#options SEMMNS=60 # number of semaphores in system 37#options SEMUME=10 # max number of undo entries per process 38#options SEMMNU=30 # number of undo structures in system 39options SYSVSHM # System V shared memory 40options P1003_1B_SEMAPHORE # POSIX semaphore support 41#options SHMMAXPGS=1024 # 1024 pages is the default 42 43options LKM # loadable kernel modules 44options INSECURE # disable kernel security level 45options USERCONF # userconf(4) support 46#options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 47options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 48 49# Enable experimental buffer queue strategy for better responsiveness under 50# high disk I/O load. Use it with caution - it's not proven to be stable yet. 51#options BUFQ_READPRIO 52#options BUFQ_PRIOCSCAN 53 54options DEBUG # kernel debugging code 55options DIAGNOSTIC # extra kernel sanity checking 56 57# Which kernel debugger? Uncomment either this: 58options DDB 59options DDB_HISTORY_SIZE=100 # enable history editing in DDB 60 61# ... or these for KGDB (gdb remote target) 62#makeoptions DEBUG="-g" # debugging symbols for gdb 63#options KGDB # support for kernel gdb 64#options KGDB_DEV=0xc01 # kgdb device number (dev_t) 65#options KGDB_DEVRATE=9600 # baud rate 66 67# Other debugging options 68options KMEMSTATS # kernel memory statistics (vmstat -m) 69#options PMAP_DEBUG 70options SCSIDEBUG 71options SCSIVERBOSE # Verbose SCSI errors 72options SWAPDEBUG 73 74# Compatibility options 75options COMPAT_43 # and 4.3BSD and ... 76options COMPAT_44 # and 4.4BSD and ... 77options COMPAT_09 # NetBSD 0.9 78options COMPAT_10 # NetBSD 1.0 79options COMPAT_11 # NetBSD 1.1 80options COMPAT_12 # NetBSD 1.2 81options COMPAT_13 # NetBSD 1.3 82options COMPAT_14 # NetBSD 1.4 83options COMPAT_15 # NetBSD 1.5 84options COMPAT_16 # NetBSD 1.6 85options COMPAT_20 # NetBSD 2.0 86 87#options TCP_COMPAT_42 # 4.2BSD TCP/IP bug compat. Not recommended. 88 89options COMPAT_M68K4K # compatibility with NetBSD/m68k4k binaries 90options COMPAT_NOMID # compatibility with 386BSD, BSDI, NetBSD 0.8, 91options COMPAT_SUNOS # can run SunOS 4.1.1 executables 92#options COMPAT_SVR4 # can run SVR4 executables 93#options COMPAT_LINUX # can run Linux/m68k executables 94options COMPAT_AOUT_M68K # support for NetBSD a.out executables 95options EXEC_AOUT # support for a.out executables 96options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 97 98# File systems 99file-system FFS # UFS 100#file-system EXT2FS # second extended file system (linux) 101#file-system LFS # log-structured file system 102file-system MFS # memory file system 103file-system NFS # Network File System client 104#file-system CD9660 # ISO 9660 + Rock Ridge file system 105#file-system MSDOSFS # MS-DOS file system 106file-system FDESC # /dev/fd 107file-system KERNFS # /kern 108file-system NULLFS # loopback file system 109file-system OVERLAY # overlay file system 110file-system PORTAL # portal filesystem (still experimental) 111file-system PROCFS # /proc 112file-system UMAPFS # NULLFS + uid and gid remapping 113file-system UNION # union file system 114#file-system PTYFS # experimental - /dev/ptm support 115 116options NFSSERVER # nfs server support 117#options QUOTA # FFS quotas 118#options SOFTDEP # FFS soft updates support. 119#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 120options FFS_NO_SNAPSHOT # ffs snapshots 121#options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 122 # immutable) behave as system flags. 123 124# Networking options 125options GATEWAY # packet forwarding 126options INET # IP + ICMP + TCP + UDP 127options INET6 # IPV6 128#options IPSEC # IP security 129#options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 130#options IPSEC_NAT_T # IPsec NAT traversal (NAT-T) 131#options IPSEC_DEBUG # debug for IP security 132#options MROUTING # IP multicast routing 133#options PIM # Protocol Independent Multicast 134#options NS # XNS 135#options NSIP # XNS tunneling over IP 136#options ISO,TPIP # OSI 137#options EON # OSI tunneling over IP 138#options CCITT,LLC,HDLC # X.25 139#options NETATALK # AppleTalk networking protocols 140options PPP_BSDCOMP # BSD-Compress compression support for PPP 141options PPP_DEFLATE # Deflate compression support for PPP 142options PPP_FILTER # Active filter support for PPP (requires bpf) 143options PFIL_HOOKS # pfil(9) packet filter hooks 144#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 145 146#options ALTQ # Manipulate network interfaces' output queues 147#options ALTQ_BLUE # Stochastic Fair Blue 148#options ALTQ_CBQ # Class-Based Queueing 149#options ALTQ_CDNR # Diffserv Traffic Conditioner 150#options ALTQ_FIFOQ # First-In First-Out Queue 151#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 152#options ALTQ_HFSC # Hierarchical Fair Service Curve 153#options ALTQ_LOCALQ # Local queueing discipline 154#options ALTQ_PRIQ # Priority Queueing 155#options ALTQ_RED # Random Early Detection 156#options ALTQ_RIO # RED with IN/OUT 157#options ALTQ_WFQ # Weighted Fair Queueing 158 159# NeXT specific options 160options M68040 161options M68030 162options FPSP 163#options FPU_EMULATE 164 165options ZS_CONSOLE_ABORT # drop to debugger on break 166#options SERCONSOLE # use serial console 167 168options NFS_BOOT_BOOTP 169options NFS_BOOT_DHCP 170 171# wscons options 172options RCONS_2BPP # necessary for nextdisplay 173options RCONS_16BPP # necessary for color nextdisplay 174#options WSEMUL_SUN # sun terminal emulation 175options WSEMUL_VT100 # VT100 / VT220 emulation 176options WSDISPLAY_COMPAT_SYSCONS # emulate some ioctls 177options WSDISPLAY_COMPAT_USL # VT handling 178options WSDISPLAY_COMPAT_RAWKBD # can get raw scancodes 179# see dev/wskbdmap_next.h for implemented layouts 180#options PCKBD_LAYOUT="(KB_DE | KB_NODEAD)" 181 182config netbsd root on ? type ? 183 184# 185# Device configuration 186# 187 188# The root node: 189mainbus0 at root 190 191#fpu0 at mainbus? 192 193# device space 194intio0 at mainbus? 195 196nextkbd0 at intio? ipl 3 197nextdisplay0 at mainbus? 198 199wsdisplay* at nextdisplay? console ? 200wskbd* at nextkbd? console ? 201 202# INTIO 203nextdma* at intio? ipl 6 204 205zsc0 at intio? ipl 5 206#zsc1 at intio? ipl 5 207 208xe* at intio? ipl 3 # ethernet 209 210esp0 at intio? ipl 3 flags 0xffff00 # Turn off sync negotiation 211 212# 213# Serial ports 214# 215zstty0 at zsc0 channel 0 # ttya 216zstty1 at zsc0 channel 1 # ttyb 217 218# SCSI bus support 219scsibus* at scsi? 220 221# SCSI devices 222sd* at scsibus? target ? lun ? # SCSI disk drives 223st* at scsibus? target ? lun ? # SCSI tape drives 224cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 225ch* at scsibus? target ? lun ? # SCSI autochangers 226se* at scsibus? target ? lun ? # SCSI ethernet 227ss* at scsibus? target ? lun ? # SCSI scanners 228uk* at scsibus? target ? lun ? # SCSI unknown 229 230 231# Memory-disk drivers 232pseudo-device md 2 233 234# Misc. 235pseudo-device loop 1 # network loopback 236pseudo-device bpfilter 8 # packet filter 237pseudo-device sl 2 # CSLIP 238pseudo-device ppp 2 # PPP 239pseudo-device pppoe # PPP over Ethernet (RFC 2516) 240pseudo-device tun 2 # network tunneling over tty 241pseudo-device tap # virtual Ethernet 242#pseudo-device gre 2 # generic L3 over IP tunnel 243pseudo-device ipfilter # ip filter 244pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 245#pseudo-device faith 1 # IPv[46] tcp relay translation i/f 246#pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 247pseudo-device vlan # IEEE 802.1q encapsulation 248pseudo-device bridge # simple inter-network bridging 249#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 250pseudo-device rnd # /dev/random and in-kernel generator 251#pseudo-device wsmux # mouse & keyboard multiplexor 252 253pseudo-device pty # pseudo-terminals 254pseudo-device vnd 4 # paging to files 255#options VND_COMPRESSION # compressed vnd(4) 256#pseudo-device raid 8 # RAIDframe disk driver 257#options RAID_AUTOCONFIG # auto-configuration of RAID components 258# Options to enable various other RAIDframe RAID types. 259# options RF_INCLUDE_EVENODD=1 260# options RF_INCLUDE_RAID5_RS=1 261# options RF_INCLUDE_PARITYLOGGING=1 262# options RF_INCLUDE_CHAINDECLUSTER=1 263# options RF_INCLUDE_INTERDECLUSTER=1 264# options RF_INCLUDE_PARITY_DECLUSTERING=1 265# options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 266pseudo-device fss 4 # file system snapshot device 267pseudo-device ccd 4 # concatenated disks 268pseudo-device clockctl # user control of clock subsystem 269pseudo-device ksyms # /dev/ksyms 270#pseudo-device pf # PF packet filter 271#pseudo-device pflog # PF log if 272 273options VMSWAP # Swap device/file support 274