xref: /src/sys/arch/prep/conf/INSTALL

#	$NetBSD: INSTALL,v 1.23 2003/01/16 06:59:20 matt Exp $
#
#	INSTALL -- Installation kernel
#

include "arch/prep/conf/std.prep"

#options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary

makeoptions	COPTS="-Os -mmultiple"	# -Os -mmultiple to reduce size.

# Enable the hooks used for initializing the ram-disk.
options 	MEMORY_DISK_HOOKS
options 	MEMORY_DISK_IS_ROOT	# Force root on ram-disk
options 	MEMORY_DISK_ROOT_SIZE=4096	# 2 Megabytes

maxusers	8

# Platform support
options 	PLATFORM_IBM_6040		# IBM ThinkPad 820
options 	PLATFORM_IBM_6050		# IBM Personal Power Series 830
options 	PLATFORM_IBM_7248		# IBM RS/6000 7248-100/120/133
options 	PLATFORM_IBM_7043_140		# IBM RS/6000 43P 7043-140
options 	PLATFORM_MOTOROLA_ULMB60XA	# Motorola ULMB60xA (?)

options 	OPENPIC				# OpenPIC support (7043-140)

# Compatibility options
options 	COMPAT_13	# NetBSD 1.3,
options 	COMPAT_14	# NetBSD 1.4,
options 	COMPAT_15	# NetBSD 1.5,
options 	COMPAT_43	# and 4.3BSD

# File systems
file-system 	FFS		# UFS
file-system	EXT2FS		# second extended file system (linux)
file-system 	MFS		# memory file system
file-system 	NFS		# Network File System client
file-system 	CD9660		# ISO 9660 + Rock Ridge file system
file-system 	MSDOSFS		# MS-DOS file system

# File system options
options 	VNODE_OP_NOINLINE	# Not inlining vnode op calls saves mem
#options 	FFS_EI		# FFS Endian Independant support
#options 	EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and
 				# immutable) behave as system flags.

options 	USERCONF	# userconf(4) support
options 	PIPE_SOCKETPAIR		# smaller, but slower pipe(2)
options 	MALLOC_NOINLINE		# Not inlining MALLOC saves memory

# Networking options
options 	INET		# IP + ICMP + TCP + UDP
options 	NFS_BOOT_BOOTPARAM
options 	NFS_BOOT_DHCP

#
# wscons options
#
# builtin terminal emulations
options 	WSEMUL_VT100		# VT100 / VT220 emulation
# different kernel output - see dev/wscons/wsdisplayvar.h
options 	WS_KERNEL_FG=WSCOL_GREEN
#options 	WS_KERNEL_BG=WSCOL_BLACK
# see dev/pckbc/wskbdmap_mfii.c for implemented layouts
#options 	PCKBD_LAYOUT="(KB_DE | KB_NODEAD)"
# allocate a number of virtual screens at autoconfiguration time
#options 	WSDISPLAY_DEFAULTSCREENS=4
# use a large software cursor that doesn't blink
options 	PCDISPLAY_SOFTCURSOR

# Kernel root file system and dump configuration.
config	netbsd	root on ? type ?


#
# Device configuration
#

mainbus0 at root
cpu0	at mainbus0


# Basic Bus Support

# PCI bus support
pci0	at mainbus0 bus ?
pci*	at pchb? bus ?
pci*	at ppb? bus ?

options 	PCI_NETBSD_CONFIGURE

# PCI bridges
pchb*	at pci? dev ? function ?	# PCI-Host bridges
pcib*	at pci? dev ? function ?	# PCI-ISA bridges
ppb*	at pci? dev ? function ?	# PCI-PCI bridges

# ISA bus support
isa*	at pcib?			# ISA on PCI-ISA bridge

# PCMCIA bus support
pcmcia* at pcic? controller ? socket ?

# ISA PCMCIA controllers
pcic0	at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000

#options 	PCIC_ISA_INTR_ALLOC_MASK=0x4a00 # free irq 9,11,14
#options 	PCIC_ISA_ALLOC_IOBASE=0x0400
#options 	PCIC_ISA_ALLOC_IOSIZE=0x0100

# ISA Plug-and-Play bus support
isapnp0 at isa?

# on-board I/O for IBM Personal Power Series 830 IDE controller
obio0	at mainbus0


# Console Devices

# wscons
pckbc0		at isa?			# pc keyboard controller
pckbd*		at pckbc?		# PC keyboard
pms*		at pckbc?		# PS/2 mouse for wsmouse
vga*		at pci?
wsdisplay*	at vga? console ?
wskbd*		at pckbd? console ?
wsmouse*	at pms? mux 0

pcppi0	at isa?				# PC prog. periph. interface
isabeep0 at pcppi?			# "keyboard" beep

mcclock0 at isa? port 0x70		# mc146818 and compatible
mkclock0 at isa? port 0x74		# mk48t18 and compatible


# Serial Devices

# ISA serial interfaces
com0	at isa? port 0x3f8 irq 4	# standard PC serial ports
com1	at isa? port 0x2f8 irq 3

# Parallel Printer Interfaces

# ISA parallel printer interfaces
lpt0	at isa? port 0x3bc irq 7	# standard PC parallel ports


# SCSI Controllers and Devices

# PCI SCSI controllers
adw*	at pci? dev ? function ?	# AdvanSys 9x0UW[D], 3940U[2,3]W SCSI
ahc*	at pci? dev ? function ?	# Adaptec [23]94x, aic78x0 SCSI
esiop*	at pci? dev ? function ?	# Symbios 53c825/875 and newer chips
iha*	at pci? dev ? function ?	# Initio INIC-940/950 SCSI
pcscp*	at pci? dev ? function ?	# AMD 53c974 PCscsi-PCI SCSI
siop*	at pci? dev ? function ?	# Symbios 53c8xx SCSI

# PCMCIA SCSI controllers
aic*	at pcmcia? function ?		# Adaptec APA-1460 SCSI

# SCSI bus support
scsibus* at adw?
scsibus* at ahc?
scsibus* at aic?
scsibus* at esiop?
scsibus* at iha?
scsibus* at pcscp?
scsibus* at siop?

# SCSI devices
sd*	at scsibus? target ? lun ?	# SCSI disk drives
st*	at scsibus? target ? lun ?	# SCSI tape drives
cd*	at scsibus? target ? lun ?	# SCSI CD-ROM drives


# IDE and related devices

# IBM Personal Power Series 830 IDE controller
wdc0	at obio? port 0x1f0 irq 13
wdc1	at obio? port 0x170 irq 13

# ISA Plug-and-Play IDE controllers
wdc*	at isapnp?

# PCMCIA IDE controllers
wdc*	at pcmcia? function ?

# IDE drives
# Flags are used only with controllers that support DMA operations
# and mode settings (e.g. some pciide controllers)
# The lowest order four bits (rightmost digit) of the flags define the PIO
# mode to use, the next set of four bits the DMA mode and the third set the
# UltraDMA mode. For each set of four bits, the 3 lower bits define the mode
# to use, and the last bit must be 1 for this setting to be used.
# For DMA and UDMA, 0xf (1111) means 'disable'.
# 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'.
# (0xc=1100, 0xa=1010, 0xf=1111)
# 0x0000 means "use whatever the drive claims to support".
wd*	at wdc? channel ? drive ? flags 0x0000

# ATAPI bus support
atapibus* at wdc? channel ?

# ATAPI devices
# flags have the same meaning as for IDE drives.
cd*	at atapibus? drive ? flags 0x0000	# ATAPI CD-ROM drives
sd*	at atapibus? drive ? flags 0x0000	# ATAPI disk drives

# Miscellaneous mass storage devices

# ISA floppy
fdc0	at isa? port 0x3f0 irq 6 drq 2	# standard PC floppy controllers
fd*	at fdc? drive ?

# Network Interfaces

# PCI network interfaces
ep*	at pci? dev ? function ?	# 3Com 3c59x
ex*	at pci? dev ? function ?	# 3Com 3c90x[BC]
fxp*	at pci? dev ? function ?	# Intel EtherExpress PRO 10+/100B
ne*	at pci? dev ? function ?	# NE2000-compatible Ethernet
pcn*	at pci? dev ? function ?	# AMD PCnet-PCI Ethernet
rtk*	at pci? dev ? function ?	# Realtek 8129/8139
sip*	at pci? dev ? function ?	# SiS 900/DP83815 Ethernet
tlp*	at pci? dev ? function ?	# DECchip 21x4x and clones
vr*	at pci? dev ? function ?	# VIA Rhine Fast Ethernet

# ISA network interfaces
ep*	at isa? port ? irq ?		# 3Com 3c509 Ethernet

# ISA Plug-and-Play network intefaces
ep*	at isapnp?			# 3Com 3c509 Ethernet
ne*	at isapnp?			# NE2000-compatible Ethernet

# PCMCIA network interfaces
ep*	at pcmcia? function ?		# 3Com 3c589 and 3c562 Ethernet
ne*	at pcmcia? function ?		# NE2000-compatible Ethernet

# MII/PHY support
exphy*	at mii? phy ?			# 3Com internal PHYs
inphy*	at mii? phy ?			# Intel 82555 PHYs
nsphy*	at mii? phy ?			# NS83840 PHYs
qsphy*	at mii? phy ?			# Quality Semiconductor QS6612 PHYs
sqphy*	at mii? phy ?			# Seeq 80220/80221/80223 PHYs
ukphy*	at mii? phy ?			# generic unknown PHYs


# Pseudo-Devices

# disk/mass storage pseudo-devices
pseudo-device	md		1	# memory disk device (ramdisk)

# network pseudo-devices
pseudo-device	loop			# network loopback

# miscellaneous pseudo-devices
pseudo-device	pty			# pseudo-terminals
pseudo-device	rnd			# /dev/random and in-kernel generator
#options 	RND_COM			# use "com" randomness as well