s/intefaces/interfaces/

branches: 1.67.2;
PR/57889: Ricardo Branco: ext2fs does not have user immutable and append
file flags, only system ones. Restrict those to the superuser. Before
the behavior was controlled by EXT2FS_SYSTEM_FLAGS. Make that behavior the
default.

Adjust _all_ cinclude of *.local files

- Ensure always at end
- Use tab rather than spaces
- Add consistent comment
"Pull in optional local configuration - always at end"

The only functional change is that a local file which tried to
override an existing setting (eg with "no foo") would have failed
in some cases before, but now will work

fix various typos in comments.

bump bebox and prep image sizes for GCC 9.

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

PR kern/51208
Add DISKLABEL_EI option (and also FFS_EI if missing), commented out except for
ALL on amd64 and i386.

branches: 1.61.2; 1.61.4; 1.61.6;
Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Don't set -mmultiple or -mno-string for PowerPC, the difference is too
small to really matter and it sometimes even increases the size.

branches: 1.59.8;
the bogus number police

branches: 1.58.2;
Update all kernel configs mentioning WSEMUL_* but not already including
WSDISPLAY_COMPAT_USL using the following rules:
- If WSEMUL_ is commented out, add commented out out WSDISPLAY_COMPAT_USL
- If INSTALL or obviously memory constrained, add WSDISPLAY_DEFAULTSCREENS=1
and commented out WSDISPLAY_COMPAT_USL
- Otherwise add WSDISPLAY_COMPAT_USL

Some of the INSTALL configs for larger memory machines are probably suitable
for adding WSDISPLAY_COMPAT_USL.

Now wsconscfg(8) should be able to switch VTs when expected.

Implemented after no objection from tech-kern to the following:

On 5 June 2012 09:47, David Brownlee <abs@absd.org> wrote:
> wsconscfg(8) requires WSDISPLAY_COMPAT_USL in order to switch virtual
> terminals.
>
> Except when in an exceptionally memory or space constrained
> environment (INSTALL being the obvious case), is there any reason why
> all GENERIC and GENERIC-like kernels which have wscons enabled
> shouldn't also have WSDISPLAY_COMPAT_USL?

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.56.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.55.2;
dependant -> dependent

Remove unused count from pseudo-device md.

Remove unused count (invariably "4") from pseudo-device fss.

branches: 1.52.4; 1.52.6;
Changes to MEMORY_RBFLAGS option:
- renamed to MEMORY_DISK_RBFLAGS to better fit the rest of the
MEMORY_DISK options(4)
- change default value to RB_AUTOBOOT instead of RB_SINGLE, and adapt
the config(5) files accordingly
- document this option inside options(4)

See also http://mail-index.netbsd.org/tech-kern/2008/12/25/msg003924.html

Reviewed by abs@ in private mail.

branches: 1.51.2;
Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.50.6; 1.50.10; 1.50.12; 1.50.16;
options<space><tab>

branches: 1.49.2;
Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.48.2; 1.48.10; 1.48.12; 1.48.14; 1.48.16;
Add slide to INSTALL and remove SLIDE irq hack. It turns out to not do
anything after all.

branches: 1.47.2; 1.47.6; 1.47.8;
update comments on NFS_V2_ONLY after nqnfs removal. no functional changes.
from Arnaud Lacombe.

remove MALLOC_NOINLINE, it doesn't do anything anymore.

branches: 1.45.2; 1.45.4;
hptide controller was tested on prep by a user. Adding to GENERIC

branches: 1.44.2;
Update install WRT recent clock changes, and break INSTALL into INSTALL
and INSTALL_SMALL. Since floppy images have to fit on one floppy, we
have to really cut down on the drivers on that image, but people
netbooting don't have that problem, so they deserve a more featured
kernel to install with. (namely one with raid support and more ethernet
drivers)

branches: 1.43.2;
Make the space for the ramdisk slightly larger.

branches: 1.42.2;
add MEMORY_DISK_SERVER=0. only saves 600bytes. lame.

Enable a few options from i386's INSTALL_SMALL that save as much space as
possible. I think this should save about 10k on prep's bootfloppies.

Move PCI_NETBSD_CONFIGURE to std.prep. Add *.local files like i386 has.

adjust comments for the new location of wskbdmap_mfii.c,
addresses PR kern/33290 by henry nelson

Disable some things to make it a wee bit smaller.

branches: 1.37.2;
Make INSTALL compile again with the new changes. Try to clean it up a
little too.

branches: 1.36.4; 1.36.6; 1.36.8; 1.36.10;
Remove obsolete options VNODE_OP_NOINLINE.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

branches: 1.33.2;
Add PLATFORM_IBM_6015 to INSTALL, as present in GENERIC.

branches: 1.32.4;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

branches: 1.29.4; 1.29.6;
Add COMPAT_BSDPTY to the rest of the config files.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

branches: 1.27.2;
reduce size...

Add COMPAT_16.

Use one 'atabus* at ata?' instead of multiple 'atabus* at FOOide? channel ?'
Use 'atapibus* at atapi?' instead of 'atapibus* at atabus?'

Add atabus.

branches: 1.23.2;
Add PLATFORM_IBM_6040

enable USERCONF by default; it's small and extremely useful to have available.

Ensure all INSTALL config files consistantly include PIPE_SOCKETPAIR,
MALLOC_NOINLINE, and VNODE_OP_NOINLINE. The exceptions are when they
include another config files that already defines the options, or if
they are for an embedded board, just define a few extra options, and
do not already define PIPE_SOCKETPAIR.

Support IBM RS/6000 43P 7043-140.

branches: 1.19.2;
Added IBM Personal Power Series 830 IDE controller support.

Use PLATFORM_*

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add ex(4).

Switch from de to tlp by default.

pmsi(4) is gone.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Rename MEMORY_DISK_SIZE (formerly MINIROOTSIZE) to MEMORY_DISK_ROOT_SIZE,
which was suggested by Izumi Tsutsui <tsutsui@ceres.dti.ne.jp> as
being more consistent with what it's controlling...

* rename MINIROOTSIZE to MEMORY_DISK_SIZE, so that all md(4) options
are now consistently named
* fold opt_mdsize.h into opt_md.h

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

prep has no special dependencies on pccons; remove.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

branches: 1.7.6;
Add pcn(4), sip(4) and tlp(4).

XXX epic(4) seems to have problem, while it works on macppc...

Add adw

branches: 1.5.2;
Add ahc(4), fxp(4), rtk(4)

Add iha(4), which works as well on my 7248.

- Add "siop at pci" and related line.
- Add "options PCI_NETBSD_CONFIGURE".

No-op commit to force update to a non-"-kk" revision.

branches: 1.1.2;
Add prep installer