INSTALL revision 1.4
1 # $NetBSD: INSTALL,v 1.4 2001/06/23 03:09:20 tsutsui Exp $ 2 # 3 # INSTALL -- Installation kernel 4 # 5 6 include "arch/prep/conf/std.prep" 7 8 makeoptions COPTS="-Os -mmultiple" # -Os -mmultiple to reduce size. 9 10 # Enable the hooks used for initializing the ram-disk. 11 options MEMORY_DISK_HOOKS 12 options MEMORY_DISK_IS_ROOT # Force root on ram-disk 13 options MINIROOTSIZE=4096 # 2 Megabytes 14 15 maxusers 8 16 17 # Compatibility options 18 #options COMPAT_13 # NetBSD 1.3, 19 options COMPAT_14 # NetBSD 1.4, 20 options COMPAT_43 # and 4.3BSD 21 22 # File systems 23 file-system FFS # UFS 24 file-system EXT2FS # second extended file system (linux) 25 file-system MFS # memory file system 26 file-system NFS # Network File System client 27 file-system CD9660 # ISO 9660 + Rock Ridge file system 28 file-system MSDOSFS # MS-DOS file system 29 30 # File system options 31 options VNODE_OP_NOINLINE # Save space by not inlining vnode op calls 32 #options FFS_EI # FFS Endian Independant support 33 #options EXT2FS_SYSTEM_FLAGS # makes ext2fs file flags (append and 34 # immutable) behave as system flags. 35 36 # Networking options 37 options INET # IP + ICMP + TCP + UDP 38 options NFS_BOOT_BOOTPARAM 39 options NFS_BOOT_DHCP 40 41 # Kernel root file system and dump configuration. 42 config netbsd root on ? type ? 43 44 45 # 46 # Device configuration 47 # 48 49 mainbus0 at root 50 cpu0 at mainbus0 51 52 53 # Basic Bus Support 54 55 # PCI bus support 56 pci0 at mainbus0 bus ? 57 pci* at pchb? bus ? 58 59 options PCI_NETBSD_CONFIGURE 60 61 # PCI bridges 62 pchb* at pci? dev ? function ? # PCI-Host bridges 63 pcib* at pci? dev ? function ? # PCI-ISA bridges 64 65 # ISA bus support 66 isa* at pcib? # ISA on PCI-ISA bridge 67 68 # PCMCIA bus support 69 pcmcia* at pcic? controller ? socket ? 70 71 # ISA PCMCIA controllers 72 pcic0 at isa? port 0x3e0 iomem 0xd0000 iosiz 0x10000 73 74 #options PCIC_ISA_INTR_ALLOC_MASK=0x4a00 # free irq 9,11,14 75 #options PCIC_ISA_ALLOC_IOBASE=0x0400 76 #options PCIC_ISA_ALLOC_IOSIZE=0x0100 77 78 # ISA Plug-and-Play bus support 79 isapnp0 at isa? 80 81 # Console Devices 82 83 # ISA console. 84 pc0 at isa? port 0x60 irq 1 # generic PC console device 85 86 # Keyboard layout configuration for pccons 87 #options FRENCH_KBD 88 #options FINNISH_KBD 89 #options GERMAN_KBD 90 #options NORWEGIAN_KBD 91 92 mcclock0 at isa? port 0x70 # mc146818 and compatible 93 94 95 # Serial Devices 96 97 # ISA serial interfaces 98 com0 at isa? port 0x3f8 irq 4 # standard PC serial ports 99 com1 at isa? port 0x2f8 irq 3 100 101 # Parallel Printer Interfaces 102 103 # ISA parallel printer interfaces 104 lpt0 at isa? port 0x3bc irq 7 # standard PC parallel ports 105 106 107 # SCSI Controllers and Devices 108 109 # PCI SCSI controllers 110 iha* at pci? dev ? function ? # Initio INIC-940/950 SCSI 111 pcscp* at pci? dev ? function ? # AMD 53c974 PCscsi-PCI SCSI 112 siop* at pci? dev ? function ? # Symbios 53c8xx SCSI 113 114 # PCMCIA SCSI controllers 115 aic* at pcmcia? function ? # Adaptec APA-1460 SCSI 116 117 # SCSI bus support 118 scsibus* at aic? 119 scsibus* at iha? 120 scsibus* at pcscp? 121 scsibus* at siop? 122 123 # SCSI devices 124 sd* at scsibus? target ? lun ? # SCSI disk drives 125 st* at scsibus? target ? lun ? # SCSI tape drives 126 cd* at scsibus? target ? lun ? # SCSI CD-ROM drives 127 128 129 # IDE and related devices 130 131 # PCMCIA IDE controllers 132 wdc* at pcmcia? function ? 133 134 # IDE drives 135 # Flags are used only with controllers that support DMA operations 136 # and mode settings (e.g. some pciide controllers) 137 # The lowest order four bits (rightmost digit) of the flags define the PIO 138 # mode to use, the next set of four bits the DMA mode and the third set the 139 # UltraDMA mode. For each set of four bits, the 3 lower bits define the mode 140 # to use, and the last bit must be 1 for this setting to be used. 141 # For DMA and UDMA, 0xf (1111) means 'disable'. 142 # 0x0fac means 'use PIO mode 4, DMA mode 2, disable UltraDMA'. 143 # (0xc=1100, 0xa=1010, 0xf=1111) 144 # 0x0000 means "use whatever the drive claims to support". 145 wd* at wdc? channel ? drive ? flags 0x0000 146 147 # ATAPI bus support 148 atapibus* at wdc? channel ? 149 150 # ATAPI devices 151 # flags have the same meaning as for IDE drives. 152 cd* at atapibus? drive ? flags 0x0000 # ATAPI CD-ROM drives 153 sd* at atapibus? drive ? flags 0x0000 # ATAPI disk drives 154 155 # Miscellaneous mass storage devices 156 157 # ISA floppy 158 fdc0 at isa? port 0x3f0 irq 6 drq 2 # standard PC floppy controllers 159 fd* at fdc? drive ? 160 161 # Network Interfaces 162 163 # PCI network interfaces 164 de* at pci? dev ? function ? # DEC 21x4x-based Ethernet 165 ep* at pci? dev ? function ? # 3Com 3c59x 166 le* at pci? dev ? function ? # PCnet-PCI Ethernet 167 ne* at pci? dev ? function ? # NE2000-compatible Ethernet 168 vr* at pci? dev ? function ? # VIA Rhine Fast Ethernet 169 170 # ISA Plug-and-Play network intefaces 171 ep* at isapnp? # 3Com 3c509 Ethernet 172 173 # PCMCIA network interfaces 174 ep* at pcmcia? function ? # 3Com 3c589 and 3c562 Ethernet 175 ne* at pcmcia? function ? # NE2000-compatible Ethernet 176 177 # MII/PHY support 178 ukphy* at mii? phy ? # generic unknown PHYs 179 180 181 # Pseudo-Devices 182 183 # disk/mass storage pseudo-devices 184 pseudo-device md 1 # memory disk device (ramdisk) 185 186 # network pseudo-devices 187 pseudo-device loop # network loopback 188 189 # miscellaneous pseudo-devices 190 pseudo-device pty # pseudo-terminals 191 pseudo-device rnd # /dev/random and in-kernel generator 192 #options RND_COM # use "com" randomness as well 193
Indexes created Sun Oct 19 02:09:48 GMT 2025