jh7100.dtsi revision 1.2 1 /* $NetBSD: jh7100.dtsi,v 1.2 2024/10/24 12:03:16 skrll Exp $ */
2
3 /*-
4 * Copyright (c) 2024 The NetBSD Foundation, Inc.
5 * All rights reserved.
6 *
7 * This code is derived from software contributed to The NetBSD Foundation
8 * by Nick Hudson
9 *
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
12 * are met:
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
18 *
19 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
20 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
23 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29 * POSSIBILITY OF SUCH DAMAGE.
30 */
31
32 #include "../../../external/gpl2/dts/dist/include/dt-bindings/clock/starfive-jh7100-audio.h"
33
34 / {
35 soc {
36 audclk: clock-controller@10480000 {
37 compatible = "starfive,jh7100-audclk";
38 reg = <0x0 0x10480000 0x0 0x10000>;
39 clocks = <&clkgen JH7100_CLK_AUDIO_SRC>,
40 <&clkgen JH7100_CLK_AUDIO_12288>,
41 <&clkgen JH7100_CLK_DOM7AHB_BUS>;
42 clock-names = "audio_src", "audio_12288", "dom7ahb_bus";
43 #clock-cells = <1>;
44 };
45
46 audrst: reset-controller@10490000 {
47 compatible = "starfive,jh7100-audrst";
48 reg = <0x0 0x10490000 0x0 0x10000>;
49 #reset-cells = <1>;
50 };
51
52 sysaudio: syscon@104a0000 {
53 compatible = "starfive,jh7100-sysaudio", "syscon";
54 reg = <0x0 0x104a0000 0x0 0x10000>;
55 };
56
57 usb3: usb@104c0000 {
58 compatible = "starfive,jh7100-usb";
59 ranges = <0x0 0x0 0x104c0000 0x100000>;
60 #address-cells = <1>;
61 #size-cells = <1>;
62 clocks = <&audclk JH7100_AUDCLK_USB_LPM>,
63 <&audclk JH7100_AUDCLK_USB_STB>,
64 <&clkgen JH7100_CLK_USB_AXI>,
65 <&clkgen JH7100_CLK_USBNOC_AXI>;
66 clock-names = "lpm", "stb", "axi", "nocaxi";
67 resets = <&rstgen JH7100_RSTN_USB_AXI>,
68 <&rstgen JH7100_RSTN_USBNOC_AXI>;
69 reset-names = "axi", "nocaxi";
70 starfive,syscon = <&sysaudio>;
71 status = "disabled";
72
73 usb_cdns3: usb@0 {
74 compatible = "cdns,usb3";
75 reg = <0x00000 0x10000>,
76 <0x10000 0x10000>,
77 <0x20000 0x10000>;
78 reg-names = "otg", "xhci", "dev";
79 interrupts = <44>, <52>, <43>;
80 interrupt-names = "host", "peripheral", "otg";
81 };
82 };
83 };
84 };
85
86
87 &sdio0 {
88 max-frequency = <10000000>;
89 };
90
91
92 &sdio1 {
93 max-frequency = <50000000>;
94 };
95
96