GENERIC revision 1.134.4.2
1 1.134.4.1 lukem # $NetBSD: GENERIC,v 1.134.4.2 2002/10/24 09:34:40 lukem Exp $ 2 1.127 gmcgarry # 3 1.127 gmcgarry # GENERIC machine description file 4 1.127 gmcgarry # 5 1.127 gmcgarry # This machine description file is used to generate the default NetBSD 6 1.127 gmcgarry # kernel. The generic kernel does not include all options, subsystems 7 1.127 gmcgarry # and device drivers, but should be useful for most applications. 8 1.127 gmcgarry # 9 1.127 gmcgarry # The machine description file can be customised for your specific 10 1.127 gmcgarry # machine to reduce the kernel size and improve its performance. 11 1.127 gmcgarry # 12 1.127 gmcgarry # For further information on compiling NetBSD kernels, see the config(8) 13 1.127 gmcgarry # man page. 14 1.127 gmcgarry # 15 1.127 gmcgarry # For further information on hardware support for this architecture, see 16 1.127 gmcgarry # the intro(4) man page. For further information about kernel options 17 1.127 gmcgarry # for this architecture, see the options(4) man page. For an explanation 18 1.127 gmcgarry # of each device driver in this file see the section 4 man page for the 19 1.127 gmcgarry # device. 20 1.1 deraadt 21 1.127 gmcgarry include "arch/sparc/conf/std.sparc" 22 1.96 hubertf 23 1.133 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 1.133 atatat 25 1.134.4.1 lukem #ident "GENERIC-$Revision: 1.134.4.2 $" 26 1.45 pk 27 1.45 pk maxusers 32 28 1.32 mrg 29 1.55 pk ## System kernel configuration. See options(4) for more detail. 30 1.55 pk 31 1.55 pk 32 1.24 thorpej # Options for variants of the Sun SPARC architecure. 33 1.55 pk # We currently support three architecture types; at least one is required. 34 1.43 lukem options SUN4 # sun4/100, sun4/200, sun4/300 35 1.43 lukem options SUN4C # sun4c - SS1, 1+, 2, ELC, SLC, IPC, IPX, etc. 36 1.43 lukem options SUN4M # sun4m - SS10, SS20, Classic, etc. 37 1.24 thorpej 38 1.109 pk options SUN4_MMU3L # sun4/400 3-level MMU 39 1.1 deraadt 40 1.55 pk ## System options specific to the sparc machine type 41 1.55 pk 42 1.55 pk # Blink the power LED on some machines to indicate the system load. 43 1.55 pk #options BLINK 44 1.55 pk 45 1.55 pk ## Use a faster console than the PROM's slow drawing routines. Not needed 46 1.55 pk ## for headless (no framebuffer) machines. 47 1.77 ad options RASTERCONSOLE # fast rasterop console 48 1.79 ad options FONT_GALLANT12x22 # the console font 49 1.79 ad #options FONT_BOLD8x16 # a somewhat smaller font 50 1.103 pk ## default console colors: black-on-white; this can be changed 51 1.103 pk ## using the following two options. 52 1.103 pk #options RASTERCONSOLE_FGCOL=WSCOL_BLACK 53 1.103 pk #options RASTERCONSOLE_BGCOL=WSCOL_WHITE 54 1.55 pk 55 1.55 pk #### System options that are the same for all ports 56 1.55 pk 57 1.55 pk ## Root device configuration: change the ?'s if you are going to use a 58 1.55 pk ## nonstandard root partition (other than where the kernel is booted from) 59 1.55 pk ## and/or nonstandard root type (not ffs or nfs). Normally this can be 60 1.55 pk ## automagically determined at boot time. 61 1.55 pk 62 1.55 pk config netbsd root on ? type ? 63 1.55 pk 64 1.55 pk ## System call tracing (see ktrace(1)). 65 1.55 pk options KTRACE 66 1.55 pk 67 1.55 pk ## Collect statistics on kernel malloc's and free's. This does have a 68 1.55 pk ## significant performance hit on slower machines, so it is intended for 69 1.55 pk ## diagnostic use only. 70 1.55 pk #options KMEMSTATS 71 1.55 pk 72 1.55 pk ## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 73 1.43 lukem options SYSVMSG # System V message queues 74 1.43 lukem options SYSVSEM # System V semaphores 75 1.125 lukem #options SEMMNI=10 # number of semaphore identifiers 76 1.125 lukem #options SEMMNS=60 # number of semaphores in system 77 1.125 lukem #options SEMUME=10 # max number of undo entries per process 78 1.125 lukem #options SEMMNU=30 # number of undo structures in system 79 1.43 lukem options SYSVSHM # System V shared memory 80 1.43 lukem #options SHMMAXPGS=1024 # 1024 pages is the default 81 1.24 thorpej 82 1.55 pk ## Loadable kernel module support; still under development. 83 1.55 pk options LKM 84 1.130 jdolecek 85 1.132 gmcgarry #options USERCONF # userconf(4) support 86 1.130 jdolecek #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 87 1.55 pk 88 1.134 lukem ## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 89 1.59 pk options NFS_BOOT_BOOTPARAM 90 1.59 pk #options NFS_BOOT_BOOTP 91 1.134 lukem options NFS_BOOT_DHCP 92 1.55 pk 93 1.55 pk #### Debugging options 94 1.55 pk 95 1.55 pk ## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 96 1.55 pk ## serial console break or keyboard reset, where the PROM would normally 97 1.55 pk ## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 98 1.55 pk #options DDB # kernel dynamic debugger 99 1.52 lukem #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 100 1.69 pk #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 101 1.55 pk 102 1.55 pk ## You may also use gdb, on another computer connected to this machine over 103 1.124 lukem ## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 104 1.124 lukem ## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 105 1.124 lukem ## the minor device number encodes the PROM enumeration of the serial ports, 106 1.124 lukem ## i.e.: 107 1.124 lukem ## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 108 1.124 lukem ## (Note: ttyc and ttyd are available only on some sun4 models) 109 1.124 lukem #options KGDB # support for kernel gdb 110 1.124 lukem #options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 111 1.124 lukem #options KGDB_DEVRATE=38400 # baud rate 112 1.24 thorpej 113 1.55 pk 114 1.55 pk ## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 115 1.55 pk ## such that gdb(1) can be used on a kernel coredump. 116 1.55 pk 117 1.125 lukem #makeoptions DEBUG="-g" 118 1.55 pk 119 1.55 pk 120 1.55 pk ## Adds code to the kernel that does internal consistency checks, and will 121 1.55 pk ## cause the kernel to panic if corruption of internal data structures 122 1.55 pk ## is detected. 123 1.55 pk #options DIAGNOSTIC # extra kernel sanity checking 124 1.55 pk 125 1.55 pk ## Enable (possibly expensive) debugging code that may also display messages 126 1.55 pk ## on the system console 127 1.55 pk #options DEBUG 128 1.55 pk 129 1.55 pk ## Make SCSI error messages more verbose when explaining their meanings. 130 1.55 pk options SCSIVERBOSE 131 1.105 augustss 132 1.105 augustss options MIIVERBOSE # verbose PHY autoconfig messages 133 1.55 pk 134 1.55 pk ## `INSECURE' turns off the kernel security level (securelevel = 0 always). 135 1.55 pk ## This allows writing to /dev/mem, loading kernel modules while multi-user, 136 1.55 pk ## and other insecurities good only for development work. Do not use this 137 1.55 pk ## option on a production machine. 138 1.55 pk #options INSECURE 139 1.55 pk 140 1.55 pk ## Allow non-root users to grab /dev/console with programs such as xconsole. 141 1.55 pk ## `xconsole' therefore does not need setuid root with this option enabled. 142 1.55 pk #options UCONSOLE 143 1.55 pk 144 1.55 pk ## `FDSCRIPTS' allows non-readable but executable scripts by providing a 145 1.55 pk ## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 146 1.55 pk ## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 147 1.55 pk ## opaque file mechanism. Perl calls this "secure setuid scripts." 148 1.55 pk 149 1.55 pk #options FDSCRIPTS 150 1.55 pk #options SETUIDSCRIPTS 151 1.55 pk 152 1.55 pk ## Options for compatibility with previous releases foreign system binaries. 153 1.55 pk ## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 154 1.55 pk ## additional user-level utilities or system configuration files. See 155 1.55 pk ## compat_sunos(8) and compat_svr4(8). 156 1.55 pk 157 1.43 lukem options COMPAT_43 # 4.3BSD system interfaces 158 1.43 lukem options COMPAT_10 # NetBSD 1.0 binary compatibility 159 1.43 lukem options COMPAT_11 # NetBSD 1.1 binary compatibility 160 1.43 lukem options COMPAT_12 # NetBSD 1.2 binary compatibility 161 1.54 mjacob options COMPAT_13 # NetBSD 1.3 binary compatibility 162 1.89 augustss options COMPAT_14 # NetBSD 1.4 binary compatibility 163 1.43 lukem options COMPAT_SUNOS # SunOS 4.x binary compatibility 164 1.43 lukem options COMPAT_SVR4 # SunOS 5.x binary compatibility 165 1.1 deraadt 166 1.55 pk ## File systems. You probably need at least one of FFS or NFS. 167 1.43 lukem file-system FFS # Berkeley Fast Filesystem 168 1.43 lukem file-system NFS # Sun NFS-compatible filesystem client 169 1.43 lukem file-system KERNFS # kernel data-structure filesystem 170 1.43 lukem file-system NULLFS # NULL layered filesystem 171 1.95 wrstuden file-system OVERLAY # overlay file system 172 1.43 lukem file-system MFS # memory-based filesystem 173 1.43 lukem file-system FDESC # user file descriptor filesystem 174 1.43 lukem file-system UMAPFS # uid/gid remapping filesystem 175 1.43 lukem file-system LFS # Log-based filesystem (still experimental) 176 1.43 lukem file-system PORTAL # portal filesystem (still experimental) 177 1.43 lukem file-system PROCFS # /proc 178 1.43 lukem file-system CD9660 # ISO 9660 + Rock Ridge file system 179 1.43 lukem file-system UNION # union file system 180 1.43 lukem file-system MSDOSFS # MS-DOS FAT filesystem(s). 181 1.91 phil file-system CODA # Coda File System; also needs vcoda (below) 182 1.43 lukem 183 1.55 pk ## File system options. 184 1.43 lukem options NFSSERVER # Sun NFS-compatible filesystem server 185 1.43 lukem options QUOTA # FFS quotas 186 1.63 pk #options FFS_EI # FFS Endian Independent support 187 1.125 lukem options SOFTDEP # FFS soft updates support. 188 1.94 itojun 189 1.55 pk ## Network protocol support. In most environments, INET is required. 190 1.57 pk options INET # IP (Internet Protocol) v4 191 1.94 itojun options INET6 # IPV6 192 1.94 itojun #options IPSEC # IP security 193 1.94 itojun #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 194 1.94 itojun #options IPSEC_DEBUG # debug for IP security 195 1.57 pk #options GATEWAY # packet forwarding ("router switch") 196 1.57 pk #options MROUTING # packet forwarding of multicast packets 197 1.57 pk #options DIRECTED_BROADCAST # allow broadcasts through routers 198 1.57 pk options NS # Xerox NS networking 199 1.57 pk #options NSIP # Xerox NS tunneling over IP 200 1.57 pk options ISO,TPIP # OSI networking 201 1.112 sommerfe #options EON # OSI tunneling over IP 202 1.57 pk #options CCITT,LLC,HDLC # X.25 packet switched protocol 203 1.75 pk #options NETATALK # AppleTalk (over Ethernet) protocol 204 1.67 pk options NTP # Network Time Protocol in-kernel support 205 1.57 pk #options PPS_SYNC # Add serial line synchronization for NTP 206 1.86 christos options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 207 1.86 christos options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 208 1.134.4.2 lukem #options IPFILTER_DEFAULT_BLOCK # block all packets by default 209 1.86 christos options PPP_BSDCOMP # Add BSD compression to ppp device 210 1.86 christos options PPP_DEFLATE # Add deflate (libz) compression to ppp device 211 1.86 christos options PPP_FILTER # Add active filters for ppp (via bpf) 212 1.1 deraadt 213 1.1 deraadt 214 1.55 pk 215 1.57 pk #### Main bus and CPU .. all systems. 216 1.1 deraadt mainbus0 at root 217 1.1 deraadt cpu0 at mainbus0 218 1.1 deraadt 219 1.55 pk #### Bus types found on SPARC systems. 220 1.55 pk 221 1.24 thorpej sbus0 at mainbus0 # sun4c 222 1.24 thorpej obio0 at mainbus0 # sun4 and sun4m 223 1.87 christos sparcvme0 at mainbus0 # sun4 224 1.22 pk iommu0 at mainbus0 # sun4m 225 1.22 pk sbus0 at iommu0 # sun4m 226 1.87 christos sparcvme0 at iommu0 # sun4m 227 1.88 drochner vme0 at sparcvme0 # mi VME attachment 228 1.64 pk 229 1.64 pk ## SBus expander box 230 1.64 pk xbox* at sbus? slot ? offset ? 231 1.64 pk sbus* at xbox? 232 1.72 pk 233 1.72 pk ## SBus to PCMCIA bridge 234 1.80 abs # Currently enabling nell* with audioamd* causes panic at attach 235 1.80 abs #nell* at sbus? slot ? offset ? # PCMCIA bridge 236 1.80 abs #pcmcia* at nell? 237 1.1 deraadt 238 1.55 pk #### Standard system devices -- all required for a given architecture 239 1.24 thorpej 240 1.55 pk ## Auxiliary system registers on sun4c and sun4m 241 1.24 thorpej auxreg0 at mainbus0 # sun4c 242 1.22 pk auxreg0 at obio0 # sun4m 243 1.106 matt auxiotwo0 at obio0 # only on Tadpole SPARCbook. 244 1.27 abrown 245 1.55 pk ## Power status and control register on Sun4m systems 246 1.27 abrown power0 at obio0 247 1.24 thorpej 248 1.55 pk ## Mostek clock found on 4/300, sun4c, and sun4m systems. 249 1.55 pk ## The Mostek clock NVRAM is the "eeprom" on sun4/300 systems. 250 1.24 thorpej clock0 at mainbus0 # sun4c 251 1.22 pk clock0 at obio0 # sun4m 252 1.24 thorpej clock0 at obio0 addr 0xf2000000 # sun4/300 253 1.24 thorpej 254 1.55 pk ## Intersil clock found on 4/100 and 4/200 systems. 255 1.24 thorpej oclock0 at obio0 addr 0xf3000000 # sun4/200 256 1.24 thorpej oclock0 at obio0 addr 0x03000000 # sun4/100 257 1.24 thorpej 258 1.55 pk ## Memory error registers. 259 1.24 thorpej memreg0 at mainbus0 # sun4c 260 1.22 pk memreg0 at obio0 # sun4m 261 1.24 thorpej memreg0 at obio0 addr 0xf4000000 # sun4/200 and sun4/300 262 1.24 thorpej memreg0 at obio0 addr 0x04000000 # sun4/100 263 1.74 pk 264 1.74 pk ## ECC memory control 265 1.74 pk eccmemctl0 at mainbus0 # sun4m 266 1.24 thorpej 267 1.55 pk ## Timer chip found on 4/300, sun4c, and sun4m systems. 268 1.24 thorpej timer0 at mainbus0 # sun4c 269 1.22 pk timer0 at obio0 # sun4m 270 1.24 thorpej timer0 at obio0 addr 0xef000000 # sun4/300 271 1.24 thorpej 272 1.55 pk ## EEPROM found on 4/100 and 4/200 systems. Note that the 4/300 273 1.55 pk ## doesn't use this driver; the `EEPROM' is in the NVRAM on the 274 1.55 pk ## Mostek clock chip on 4/300 systems. 275 1.24 thorpej eeprom0 at obio0 addr 0xf2000000 # sun4/200 276 1.24 thorpej eeprom0 at obio0 addr 0x02000000 # sun4/100 277 1.24 thorpej 278 1.55 pk 279 1.55 pk #### Serial port configuration 280 1.55 pk 281 1.55 pk ## Zilog 8530 serial chips. Each has two-channels. 282 1.55 pk ## zs0 is ttya and ttyb. zs1 is the keyboard and mouse. 283 1.24 thorpej zs0 at mainbus0 # sun4c 284 1.24 thorpej zs0 at obio0 # sun4m 285 1.100 pk zs0 at obio0 addr 0xf1000000 level 12 # sun4/200 and sun4/300 286 1.100 pk zs0 at obio0 addr 0x01000000 level 12 # sun4/100 287 1.100 pk zstty0 at zs0 channel 0 # ttya 288 1.100 pk zstty1 at zs0 channel 1 # ttyb 289 1.50 gwr 290 1.24 thorpej zs1 at mainbus0 # sun4c 291 1.24 thorpej zs1 at obio0 # sun4m 292 1.100 pk zs1 at obio0 addr 0xf0000000 level 12 # sun4/200 and sun4/300 293 1.100 pk zs1 at obio0 addr 0x00000000 level 12 # sun4/100 294 1.100 pk kbd0 at zs1 channel 0 # keyboard 295 1.100 pk ms0 at zs1 channel 1 # mouse 296 1.100 pk 297 1.100 pk zs2 at obio0 addr 0xe0000000 level 12 # sun4/300 298 1.100 pk zstty2 at zs2 channel 0 # ttyc 299 1.100 pk zstty3 at zs2 channel 1 # ttyd 300 1.113 matt 301 1.125 lukem ## NS16x50 serial chips and clones. Present on the 302 1.113 matt ## Sun JavaStation-1 and Tadpole SPARCbook 3 303 1.113 matt com* at obio0 # sun4m 304 1.66 pk 305 1.97 cjs # Parallel port. 306 1.97 cjs bpp* at sbus? slot? offset ? 307 1.66 pk 308 1.66 pk ## Magma Serial/Parallel driver 309 1.66 pk magma* at sbus? slot ? offset ? 310 1.66 pk mtty* at magma? 311 1.66 pk mbpp* at magma? 312 1.66 pk 313 1.75 pk ## PCMCIA serial interfaces 314 1.80 abs #com* at pcmcia? 315 1.80 abs #pcmcom* at pcmcia? 316 1.80 abs #com* at pcmcom? 317 1.24 thorpej 318 1.55 pk #### Disk controllers and disks 319 1.55 pk 320 1.26 pk # 321 1.26 pk 322 1.55 pk ## The following flags may be set for the NCR53c94 based esp driver: 323 1.55 pk ## bits 0-7: disable disconnect/reselect for the corresponding target 324 1.55 pk ## bits 8-15: disable synchronous negotiation for target [bit-8] 325 1.55 pk 326 1.55 pk ## sun4/300, sun4c, sun4m on-board SCSI, and FSBE/S SBus SCSI cards. 327 1.55 pk ## Both `dma' and `esp' are needed in all cases. 328 1.55 pk ## Two kinds of additional SBus SCSI interfaces are available. One uses 329 1.55 pk ## "esp at sbus" like the sun4c on-board; the other uses "esp at dma". 330 1.55 pk 331 1.55 pk ## sun4/300 SCSI - an NCR53c94 or equivalent behind 332 1.55 pk ## an LSI Logic DMA controller 333 1.55 pk 334 1.24 thorpej dma0 at obio0 addr 0xfa001000 level 4 # sun4/300 335 1.55 pk esp0 at obio0 addr 0xfa000000 level 4 flags 0x0000 # sun4/300 336 1.1 deraadt 337 1.55 pk dma0 at sbus0 slot ? offset ? # sun4c/sun4m 338 1.51 pk esp0 at sbus0 slot ? offset ? flags 0x0000 # sun4c 339 1.51 pk esp0 at dma0 flags 0x0000 # sun4m 340 1.24 thorpej 341 1.55 pk # FSBE/S SCSI 342 1.55 pk dma* at sbus? slot ? offset ? # SBus 343 1.55 pk esp* at sbus? slot ? offset ? flags 0x0000 # SBus (older proms) 344 1.55 pk esp* at dma? flags 0x0000 # SBus 345 1.24 thorpej 346 1.55 pk scsibus* at esp? 347 1.55 pk 348 1.55 pk ## Qlogic ISP SBus SCSI Card 349 1.42 cgd isp* at sbus? slot ? offset ? 350 1.55 pk scsibus* at isp? 351 1.42 cgd 352 1.55 pk ## NCR5380-based "Sun SCSI 3" VME SCSI controller. 353 1.55 pk ## This driver has several flags which may be enabled by OR'ing 354 1.55 pk ## the values and using the "flags" directive. 355 1.55 pk ## Valid flags are: 356 1.55 pk ## 357 1.55 pk ## 0x01 Use DMA (may be polled) 358 1.55 pk ## 0x02 Use DMA completion interrupts 359 1.55 pk ## 0x04 Allow disconnect/reselect 360 1.55 pk ## 361 1.55 pk ## E.g. the following would enable DMA, interrupts, and reselect: 362 1.88 drochner ## si0 at vme0 addr 0x200000 irq 3 vect 0x40 flags 0x07 363 1.55 pk ## 364 1.55 pk ## By default, DMA is enabled in the driver. 365 1.25 pk 366 1.88 drochner si0 at vme0 addr 0x200000 irq 2 vect 0x40 367 1.55 pk scsibus* at si? 368 1.24 thorpej 369 1.55 pk ## NCR5380-based "SCSI Weird" on-board SCSI interface found 370 1.55 pk ## on sun4/100 systems. The flags are the same as the "si" 371 1.55 pk ## controller. Note, while DMA is enabled by default, only 372 1.55 pk ## polled DMA works at this time, and reselects do not work 373 1.55 pk ## on this particular controller. 374 1.1 deraadt 375 1.55 pk sw0 at obio0 addr 0x0a000000 level 3 376 1.55 pk scsibus* at sw? 377 1.24 thorpej 378 1.75 pk ## PCMCIA SCSI controllers 379 1.80 abs #aic* at pcmcia? 380 1.80 abs #scsibus* at aic? 381 1.75 pk 382 1.75 pk 383 1.55 pk ## These entries find devices on all SCSI busses and assign 384 1.55 pk ## unit numbers dynamically. 385 1.55 pk sd* at scsibus? target ? lun ? # SCSI disks 386 1.55 pk st* at scsibus? target ? lun ? # SCSI tapes 387 1.55 pk cd* at scsibus? target ? lun ? # SCSI CD-ROMs 388 1.55 pk ch* at scsibus? target ? lun ? # SCSI changer devices 389 1.55 pk ss* at scsibus? target ? lun ? # SCSI scanners 390 1.118 mjacob ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE 391 1.55 pk uk* at scsibus? target ? lun ? # unknown SCSI 392 1.23 pk 393 1.9 pk 394 1.55 pk ## Xylogics 753 or 7053 VME SMD disk controllers and disks, found 395 1.55 pk ## on sun4 systems. 396 1.88 drochner xdc0 at vme0 addr 0xee80 irq 3 vect 0x44 397 1.88 drochner xdc1 at vme0 addr 0xee90 irq 3 vect 0x45 398 1.88 drochner xdc2 at vme0 addr 0xeea0 irq 3 vect 0x46 399 1.88 drochner xdc3 at vme0 addr 0xeeb0 irq 3 vect 0x47 400 1.9 pk xd* at xdc? drive ? 401 1.16 chuck 402 1.55 pk ## Xylogics 451 or 451 VME SMD disk controllers and disks, found 403 1.55 pk ## on sun4 systems. 404 1.88 drochner xyc0 at vme0 addr 0xee40 irq 3 vect 0x48 405 1.88 drochner xyc1 at vme0 addr 0xee48 irq 3 vect 0x49 406 1.16 chuck xy* at xyc? drive ? 407 1.10 pk 408 1.24 thorpej 409 1.55 pk ## Floppy controller and drive found on SPARCstations. 410 1.55 pk 411 1.55 pk fdc0 at mainbus0 # sun4c controller 412 1.55 pk fdc0 at obio0 # sun4m controller 413 1.55 pk fd* at fdc0 # the drive itself 414 1.55 pk 415 1.75 pk ## PCMCIA IDE controllers 416 1.80 abs #wdc* at pcmcia? 417 1.80 abs #wd* at wdc? 418 1.75 pk 419 1.55 pk ## A disk-like interface to files. Can be used to create floppy, CD, 420 1.55 pk ## miniroot images, etc. 421 1.55 pk 422 1.55 pk pseudo-device vnd 4 423 1.55 pk 424 1.55 pk ## Concatenated and striped disks; with this, you can create a software-based 425 1.55 pk ## disk array similar to a "RAID 0" setup. See ccd(4). 426 1.55 pk 427 1.55 pk pseudo-device ccd 4 428 1.71 oster 429 1.71 oster ## RAIDframe disk driver: software RAID driver. See raid(4). 430 1.71 oster 431 1.129 oster pseudo-device raid 8 432 1.129 oster options RAID_AUTOCONFIG # auto-configuration of RAID components 433 1.129 oster # Options to enable various other RAIDframe RAID types. 434 1.129 oster # options RF_INCLUDE_EVENODD=1 435 1.129 oster # options RF_INCLUDE_RAID5_RS=1 436 1.129 oster # options RF_INCLUDE_PARITYLOGGING=1 437 1.129 oster # options RF_INCLUDE_CHAINDECLUSTER=1 438 1.129 oster # options RF_INCLUDE_INTERDECLUSTER=1 439 1.129 oster # options RF_INCLUDE_PARITY_DECLUSTERING=1 440 1.129 oster # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 441 1.129 oster 442 1.55 pk 443 1.55 pk ## Memory disk device, used on boot floppies with compressed 444 1.55 pk ## kernel-plus-root-disk images. 445 1.55 pk 446 1.55 pk #pseudo-device md 1 447 1.55 pk 448 1.55 pk 449 1.55 pk #### Network interfaces 450 1.55 pk 451 1.55 pk ## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue 452 1.55 pk ## Three flavors of additional SBus ethernets are available. One attaches 453 1.55 pk ## directly like the sun4c on-board, one uses the ledma device like the 454 1.55 pk ## sun4m on-board, and one uses the lebuffer device. 455 1.55 pk 456 1.56 pk le0 at obio0 addr 0xf9000000 level 6 # sun4/300 457 1.56 pk le0 at sbus0 slot ? offset ? # sun4c on-board 458 1.56 pk ledma0 at sbus0 slot ? offset ? # sun4m on-board 459 1.56 pk le0 at ledma0 # sun4m on-board 460 1.56 pk le* at sbus? slot ? offset ? # SBus 461 1.56 pk ledma* at sbus? slot ? offset ? # SBus 462 1.56 pk le* at ledma? # SBus 463 1.56 pk lebuffer0 at sbus? slot ? offset ? # SBus 464 1.56 pk le0 at lebuffer? # SBus 465 1.55 pk lebuffer* at sbus? slot ? offset ? # SBus 466 1.56 pk le* at lebuffer? # SBus 467 1.55 pk 468 1.55 pk 469 1.55 pk ## sun4/100 and sun4/200 Ethernet - an Intel 82586 on-board 470 1.55 pk ## or on a Multibus/VME card. 471 1.55 pk ie0 at obio0 addr 0xf6000000 level 6 # sun4/200 on-board 472 1.55 pk ie0 at obio0 addr 0x06000000 level 6 # sun4/100 on-board 473 1.108 pk ## VME: the first [addr,len] pair specifies the device registers; 474 1.108 pk ## the second pair specifies the on-board memory buffer 475 1.108 pk ie1 at vme0 addr 0xe88000,0xe00000 len -1,0x40000 irq 3 vect 0x75 476 1.108 pk ie2 at vme0 addr 0x31ff02,0x300000 len -1,0x40000 irq 3 vect 0x76 477 1.108 pk ie3 at vme0 addr 0x35ff02,0x300000 len -1,0x40000 irq 3 vect 0x77 478 1.108 pk ie4 at vme0 addr 0x2dff02,0x200000 len -1,0x40000 irq 3 vect 0x7c 479 1.55 pk 480 1.90 hubertf ## Quad Ethernet Controller with BigMac (be, 10/100MBd) and Mace Ethernet 481 1.90 hubertf ## (qe, 10MBd) attached. 482 1.90 hubertf qec* at sbus? slot ? offset ? # Quad Ethernet Controller 483 1.90 hubertf be* at qec? # BigMac Ethernet (10/100MBd) 484 1.90 hubertf qe* at qec? # Mace Ethernet (10MBd) 485 1.85 pk 486 1.98 pk ## Happy Meal Ethernet 487 1.98 pk hme* at sbus? slot ? offset ? 488 1.70 pk 489 1.70 pk # midway ATM 490 1.70 pk en0 at sbus? slot ? offset ? 491 1.75 pk 492 1.75 pk # PCMCIA ethernet devices 493 1.80 abs #ep* at pcmcia? 494 1.80 abs #mbe* at pcmcia? 495 1.80 abs #ne* at pcmcia? 496 1.80 abs #sm* at pcmcia? 497 1.75 pk 498 1.75 pk # MII/PHY support 499 1.81 pk exphy* at mii? phy ? # 3Com internal PHYs 500 1.131 wiz icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x 501 1.81 pk inphy* at mii? phy ? # Intel 82555 PHYs 502 1.81 pk lxtphy* at mii? phy ? # Level One LXT-970 PHYs 503 1.81 pk nsphy* at mii? phy ? # NS83840 PHYs 504 1.81 pk qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 505 1.81 pk sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs 506 1.81 pk tlphy* at mii? phy ? # ThunderLAN PHYs 507 1.81 pk ukphy* at mii? phy ? # generic unknown PHYs 508 1.70 pk 509 1.55 pk ## Loopback network interface; required 510 1.55 pk pseudo-device loop 511 1.55 pk 512 1.55 pk ## SLIP and CSLIP interfaces, for IP over a serial line. 513 1.55 pk pseudo-device sl 2 514 1.55 pk 515 1.55 pk ## PPP, the successor to SLIP. See pppd(8). 516 1.55 pk pseudo-device ppp 2 517 1.128 martin 518 1.128 martin ## PPP over Ethernet (RFC 2516) 519 1.128 martin pseudo-device pppoe 520 1.55 pk 521 1.55 pk ## Starmode Radio IP, a special hardware network device. 522 1.55 pk #pseudo-device strip 1 523 1.55 pk 524 1.55 pk ## Network "tunnel" device, allowing protocol stacks to run in the userland. 525 1.55 pk ## This is used by the third-party user-mode "ppp" program, and others. 526 1.55 pk pseudo-device tun 4 527 1.73 hwr 528 1.73 hwr ## Generic L3 over IP tunnel 529 1.73 hwr #pseudo-device gre 2 # generic L3 over IP tunnel 530 1.55 pk 531 1.55 pk ## Berkeley Packet Filter, required to run RARPD. A generic C-language 532 1.55 pk ## interface that allows selective examining of incoming packets. 533 1.55 pk pseudo-device bpfilter 8 534 1.55 pk 535 1.55 pk ## IP Filter, used in firewall and NAT applications. See ipnat(8) for 536 1.55 pk ## one example of the use of the IP Filter. 537 1.55 pk pseudo-device ipfilter 538 1.55 pk 539 1.94 itojun ## for IPv6 540 1.94 itojun pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 541 1.94 itojun #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 542 1.104 itojun #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 543 1.120 hubertf 544 1.120 hubertf ## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 545 1.120 hubertf pseudo-device vlan 546 1.122 atatat 547 1.122 atatat ## Simple inter-network traffic bridging 548 1.126 atatat pseudo-device bridge 549 1.55 pk 550 1.55 pk #### Audio and video devices 551 1.55 pk 552 1.55 pk ## /dev/audio support (`audioamd' plus `audio') 553 1.55 pk ## 554 1.55 pk audioamd0 at mainbus0 # sun4c 555 1.63 pk #audioamd0 at obio0 # sun4m 556 1.55 pk audioamd0 at sbus0 slot ? offset ? # sun4m 557 1.55 pk audio* at audioamd0 558 1.70 pk 559 1.70 pk audiocs0 at sbus0 slot ? offset ? # SUNW,CS4231 560 1.70 pk audio* at audiocs0 561 1.55 pk 562 1.55 pk 563 1.55 pk ## Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m 564 1.55 pk ## systems. If your sun4 system has a cgfour installed in the P4 slot, 565 1.55 pk ## the P4 entries for "bwtwo" will attach to the overlay plane of the 566 1.55 pk ## "cgfour". 567 1.1 deraadt 568 1.55 pk bwtwo0 at sbus0 slot ? offset ? # sun4c and sun4m 569 1.55 pk bwtwo* at sbus? slot ? offset ? # 570 1.55 pk bwtwo0 at obio0 addr 0xfd000000 level 4 # sun4/200 571 1.55 pk bwtwo0 at obio0 addr 0xfb300000 level 4 # sun4/300 in P4 slot 572 1.55 pk bwtwo0 at obio0 addr 0x0b300000 level 4 # sun4/100 in P4 slot 573 1.21 thorpej 574 1.55 pk ## Sun "cgtwo" VME color framebuffer 575 1.88 drochner cgtwo0 at vme0 addr 0x400000 irq ? vect 0xa8 576 1.21 thorpej 577 1.55 pk ## Sun "cgthree" Sbus color framebuffer 578 1.55 pk cgthree0 at sbus? slot ? offset ? 579 1.55 pk cgthree* at sbus? slot ? offset ? 580 1.55 pk #cgthree0 at obio? slot ? offset ? # sun4m 581 1.55 pk 582 1.55 pk ## Sun "cgfour" color framebuffer with overlay plane. See above comment 583 1.55 pk ## regarding overlay plane. 584 1.55 pk cgfour0 at obio0 addr 0xfb300000 level 4 # sun4/300 P4 585 1.55 pk cgfour0 at obio0 addr 0x0b300000 level 4 # sun4/100 P4 586 1.55 pk 587 1.55 pk ## Sun "cgsix" accelerated color framebuffer. 588 1.55 pk cgsix0 at sbus? slot ? offset ? 589 1.55 pk cgsix* at sbus? slot ? offset ? 590 1.55 pk cgsix0 at obio0 addr 0xfb000000 level 4 # sun4/300 P4 591 1.55 pk cgsix0 at obio0 addr 0x0b000000 level 4 # sun4/100 P4 592 1.55 pk 593 1.55 pk ## Sun "cgeight" 24-bit framebuffer 594 1.55 pk cgeight0 at obio0 addr 0xfb300000 level 4 # sun4/300 P4 595 1.55 pk cgeight0 at obio0 addr 0x0b300000 level 4 # sun4/100 P4 596 1.55 pk 597 1.55 pk ## Sun "tcx" accelerated color framebuffer. 598 1.55 pk tcx0 at sbus? slot ? offset ? 599 1.55 pk tcx* at sbus? slot ? offset ? 600 1.33 abrown 601 1.33 abrown # Sun "cgfourteen" accelerated 24-bit framebuffer. 602 1.33 abrown cgfourteen0 at obio0 # sun4m 603 1.1 deraadt 604 1.106 matt # P9100-based display on Tadpole SPARCbook 3. 605 1.106 matt pnozz0 at sbus? slot ? offset ? 606 1.1 deraadt 607 1.55 pk #### Other device configuration 608 1.106 matt 609 1.106 matt # Tadpole microcontroller 610 1.106 matt tctrl0 at obio0 611 1.24 thorpej 612 1.55 pk ## Pseudo ttys, required for network logins and programs like screen. 613 1.24 thorpej 614 1.117 jdolecek pseudo-device pty # pseudo-terminals 615 1.55 pk 616 1.55 pk ## Random device, used to implement /dev/random (a source of random noise), 617 1.55 pk ## and generate randomness for some kernel formulae. 618 1.55 pk 619 1.84 mrg pseudo-device rnd 620 1.91 phil 621 1.91 phil # a pseudo device needed for Coda # also needs CODA (above) 622 1.91 phil pseudo-device vcoda 4 # coda minicache <-> venus comm. 623 1.134.4.1 lukem 624 1.134.4.1 lukem pseudo-device clockctl # user control of clock subsystem 625
Indexes created Sun Oct 26 20:09:54 GMT 2025