enable apc(4) by default.

it seems that the original commit left it disabled as the linux
driver has a comment about it hanging on prototype systems (that
i don't recall ever hearing about with netbsd), but it's enabled
by default there, so let's enable it by default.

the real benefit here is that qemu-system-sparc detects this and
it idles on the host properly.

s/architecure/architecture/ and few other typos in comments.

branches: 1.273.6;
Add optoion GENERIC.local include to the end of ~all GENERIC configs

This excludes atari, sgimips, evbmips, evbppc, evbsh3, and hpcarm
all of which have somewhat specific kernel config file layouts

branches: 1.272.4;
swwdog(4): Add to GENERIC kernels.

Plus a handful of others that I'm familiar with. Lots of special-
purpose kernels should probably have this too but I'm not going
through all the arm, mips, and ppc evaluation board kernels to see
which ones are relevant.

Omitted from systems I know to be very small:
- sun2/GENERIC
- dreamcast/GENERIC
Feel free to remove it from others that need to be kept smaller.

Compile-tested a few of these just in case:
- alpha/GENERIC
- amd64/GENERIC
- evbmips/OCTEON
- i386/GENERIC
- riscv/GENERIC

PR kern/29702

UFS/LFS dirhash:
- Enable UFS_DIRHASH if the architecture or kernel model specific config
file can use 128MB of RAM or more.
- Remove experimental tag from UFS_DIRHASH; it's been with RUMP kernel
and by a number of NetBSD developers for years.
- Add LFS_DIRHASH if LFS was enabled.
- Be somewhat consistent with FS options order.

vether: Add to kernel configurations

It's only enabled if the kernel enabled bridge AND tap.
Otherwise it's commented out.

Remove references to BRIDGE_IPF, it is now compiled in by default.

Remove the strip(4) - Starmode Radio IP - pseudo-device driver. It is
long since obsolete.

branches: 1.267.2; 1.267.4;
Merge isaki-audio2 branch, the overhaul of audio subsystem.
- Interrupt-oriented system rather than thread-oriented.
- Improve stability, quality and performance.
- Split playback and record cleanly. Improve halfduplex support.
- Many bugs are fixed including deadlocks, resource leaks, abuses, etc.
- Simplify audio filter mechanism. The encoding/channels/frequency
conversions are completely handled in the upper layer. So the hard-
ware driver only converts its hardware encoding (if necessary).
- audio_hw_if changes:
- Obsoletes query_encoding and add query_format instead.
- Obsoletes set_params and add set_format instead.
- Remove drain, setfd, mappage.
- The call sequences are changed.
- ioctl AUDIO_GETFD/SETFD, AUDIO_GETCHAN/SETCHAN are obsoleted.
- ioctl AUDIO_{QUERY,GET,SET}FORMAT are introduced.
- cleanup config attributes: au*conv and mulaw.
- All hardware drivers should follow it (I've done as much as possible).

Some file paths are changed:
- dev/audio.c -> dev/audio/audio.c (rewritten)
- dev/audiovar.h -> dev/audio/audiovar.h
- dev/audio_dai.h -> dev/audio/audio_dai.h
- dev/audio_if.h -> dev/audio/audio_if.h
- dev/audiobell.c -> dev/audio/audiobell.c
- dev/audiobellvar.h -> dev/audio/audiobellvar.h
- dev/mulaw.[ch] -> dev/audio/mulaw.[ch] + dev/audio/alaw.c

Enable BUFQ_PRIOCSCAN, CARP, Veriexec by default in GENERIC kernel configs.
On ports without a GENERIC kernel config enable in individul files, e.g evbmips.
Omit on:
atari, dreamcast, emips, epoc32, evbppc/VIRTEX*, ia64, luna68x, mvme68k,
mvmeppc, playstation2, riscv, sun2, sun3, x68k, zaurus due to resource
constraints or port infancy.

branches: 1.265.2;
Add drvctl to kernel which has audio device.
audiocfg(1) requires drvctl(4).

add commented QUOTA2 line.

normalise comment for fileassoc(8). from PR#44873.

Remove compat_svr4 and compat_svr4_32, as discussed on tech-kern@ recently,
but also as discussed several times in the past.

Retire the 'midway' driver. Discussed on tech-net@ recently and also three
years ago, part of removing the network ATM code.

Unreference IPF/PF from all the config files, and enable NPF instead when
wanted. This also fixes some inconsistencies I saw in several files (eg
IPF options while IPF was not compiled, IPF+PF enabled by default, etc).

branches: 1.259.2; 1.259.4;
Nuke DIRECTED_BROADCAST, it is not documented and not enabled anywhere. It
probably wouldn't have built correctly anyway, since there is no associated
defflag.

These ten lines of code in ip_input.c already look a lot better.

Alternate buffer queue strategies no longer considered experimental, update
description.

Discussed on tech-kern
http://mail-index.netbsd.org/tech-kern/2018/01/21/msg023002.html

Enable DIAGNOSTIC

clean up COMPAT_* options for native netbsd code:
- new series of files that are useful for saying "i want everything
since netbsd 1.4", etc.
- use the fact COMPAT_* options have future dependancies to remove
many redundant options.

removes about 3000 lines total across kernel configuration files.
tested about 30 random kernels in the changed list.

Remove support for VERIFIED_EXEC_FP_RMD160, VERIFIED_EXEC_FP_SHA1, and VERIFIED_EXEC_FP_MD5 options.
These algorithms are either broken or on their way to being broken.

Discussed on tech-security
http://mail-index.netbsd.org/tech-security/2017/08/21/msg000936.html

ok riastradh

Disable svr4 and svr4_32 on sparc, sparc64 and amiga - the only places
where they were still enabled.

branches: 1.253.8;
revert the previous. sparc has no spkr.

Add a synthesized pc beeper and keyboard bell for platforms with an audio
device.

mention PAX_SEGVGUARD dependency on FILEASSOC

branches: 1.250.2;
- purge long obsolete RASTERCONSOLE
- add mgx

Remove KMEMSTATS. Normally it's ok now.

branches: 1.248.2;
Remove unused extended attributes kernel options

As Masao Uebayashi pointed to me, UFS_EXTATTR_AUTOSTART, LFS_EXTATTR_AUTOSTART
and UFS_EXTATTR_AUTOCREATE are not used anywhere in the code. Remove them
as they have been obsolete for a long time:
UFS_EXTATTR_AUTOSTART was replaced by mount -o extattr
LFS_EXTATTR_AUTOSTART was created to match obsolete UFS_EXTATTR_AUTOSTART
UFS_EXTATTR_AUTOCREATE was replaced by sysctl vfs.ffs.extattr_autocreate

Support for UFS1 extended attributes in GENERIC and GENERIC-like kernels

This change just brings UFS1 extended attribute *support* in the kernel,
extended attributes are not enabled unless three conditions are met:
1) filesystem is UFS1 (newfs -O1)
2) .attribute/system and .attribute/user directories are created at fs root
3) filesystem is mounted with -o extattr

Some GENERIC kernels are obviously memory constrained, the extended
attributes options were not enabled for them, but just added commented out.
(kernel were considered memory constrained if QUOTA option was disabled)

Create an "options MODULAR_DEFAULT_AUTOLOAD" config option and add
it to all kernel configs that contain "options MODULAR". This
option turns on module autoloading by default (which is the current
default). This allows people who don't want module autoloading on
by default to disable it by simply removing/commentting this line.

Systematize (and in many cases, fix) the comments on options COMPAT_NN.

There are quite a few configs that are missing some COMPAT_NN options
in ways that don't make sense; this should probably get cleaned up
too, but for the time being I've not added or removed anything.

Add "options COMPAT_70" to all kernel configuration files that
already had "options COMPAT_60".

branches: 1.243.4;
fix manual section numbering of sysctl.
thanks wiz@

G/C PFIL_HOOKS from the kernel configs.

branches: 1.241.2;
remove obsolete networking options

the bogus number police

remove confusing numeric locators where they are unused.

Under FAST_IPSEC, IPSEC_ESP is mandatory; GC it.

Retire OSI network stack. OK core@

add sx at mainbus

Add "options COMPAT_60" to all kernel configuration files
that already had "options COMPAT_50".

branches: 1.234.2;
Ensure all WSDISPLAY_COMPAT_USL entries have same comment

switch to WSEMUL_VT100 to reduce differences with sparc64 and other wscons
and fb console using ports
WSEMUL_SUN is left in but commented out so whoever wants it back can have it
with minimal effort

Remove stray comments for LKM.

P1003_1B_SEMAPHORE is no longer optional.

branches: 1.230.2; 1.230.6; 1.230.8;
include a small font

WABPL is no longer considered experimental (has not been for some time)
so update its comment in config files.

branches: 1.228.2;

The rnd pseudo-device is not really optional, because it is in the same
source file as the entropy-pool code itself. Move it to std. This
will be cleaned up more when I split the sources up as they should be.

This fixes build breaks on several ports. Thanks to Havard Eidnes for
pointing them out.

branches: 1.227.2;
enable options MODULAR, now that it is tested to work.

branches: 1.226.4;
Add (commented out) LOCKDEBUG and SYSCALL_DEBUG options.

branches: 1.225.2;
Remove unused count from pseudo-device md.

enable IPFILTER_COMPAT in all kernels that have ipfilter already.
canonicalise several of the ipf option segments in various files
(this mostly means adding commented out IPFILTER_DEFAULT_BLOCK,
or adding commented or uncommented IPFILTER_LOG or IPFILTER_LOOKUP
option statements.)

i built about 20 of these kernels to check, but not all of them.

enable TMPFS in all GENERICs that have MFS enabled.

Remove unused count (invariably "4") from pseudo-device fss.

enable CG12 support

branches: 1.220.2;
enable PNOZZ_USE_LATCH in case we run into some hardware which needs it

branches: 1.219.2;
Add apc(4), a driver for the Aurora Personality Chip (APC) found
on SPARCstation-4/5, and emulated by qemu to idle the simulator
when the CPU is idle. Infos about the registers from the linux driver.
Not enabled by default because it can cause some Sparc systems to
hang (so says the linux driver).
Only the CPU idle part implemented at this time; fan speed and
Convenience power outlet management to be added.
Tested on qemu.

Remove the portalfs kernel file system driver. Replace mount_portal(8)
with a version based on puffs. User functionality remains the same.

Move some devices where they should belong to.

Remove commented out and nonexistent cgthree at obio stuff.

SPARCclassic has onboard CG3 but it's internally connected via SBus,
and there is no info about sun4m machines which actually require
cgthree at obio attachment. Info from jdc@.

enable the tcx driver

Enable ddb(4) for sparc GENERIC-like kernels.
Discussed on port-sparc@.

enable ZX/Leo since we now support wscons on it

Put back zstty0 and zstty1 lines for onboard zs(4) serial ports
so that they are properly assinged to ttya and ttyb as pre-wscons kernels.
Ok'ed by macallan@.

branches: 1.211.2;
Cosmetic clean up:
options<space><tab>

normalise a comment.

add COMPAT_50 to all the configs with COMPAT_40.

wscons here we come!
(finally)

Remove softdep, pass 1. We are focused on improving journalling.

Proposed on tech-kern@.

Remove LKMs and switch to the module framework, pass 1.

Proposed on tech-kern@.

branches: 1.205.2; 1.205.4; 1.205.8;
Add accept filters to GENERIC kernels where they exist.

Add "options WAPBL" to standard GENERIC/INSTALL type configs.

branches: 1.203.6; 1.203.10; 1.203.12; 1.203.16;
Remove systrace. Ok core@.

branches: 1.202.2; 1.202.8;
Remove System V semaphores and share memory options to set the limits:
SEMMNI, SEMMNS, SEMUME and SHMMAXPGS.

They can be tweaked via sysctl now. Ports that were setting values on
them weren't touched, I only removed the ones that were commented out.

Merge the ppcoea-renovation branch to HEAD.

This branch was a major cleanup and rototill of many of the various OEA
cpu based PPC ports that focused on sharing as much code as possible
between the various ports to eliminate near-identical copies of files in
every tree. Additionally there is a new PIC system that unifies the
interface to interrupt code for all different OEA ppc arches. The work
for this branch was done by a variety of people, too long to list here.

TODO:
bebox still needs work to complete the transition to -renovation.
ofppc still needs a bunch of work, which I will be looking at.
ev64260 still needs to be renovated
amigappc was not attempted.

NOTES:
pmppc was removed as an arch, and moved to a evbppc target.

branches: 1.200.2; 1.200.6;
Remove iso(4) from GENERIC kernels, as discussed on tech-net@
Ok'ed by core@

branches: 1.199.2; 1.199.4; 1.199.8;
Add pseudo-device agr to all GENERIC kernels where it might make sense
(commented out in some).

Add COMPAT_40. While here, make COMPAT_30 comment match other COMPAT_*.

branches: 1.197.6; 1.197.8; 1.197.14;
sparc64: don't enable PaX MPROTECT by default for now.
sparc: add commented out 'FILEASSOC'.

branches: 1.196.2;
Remove tmpfs's experimental status. OK'ed by core@.

- Document COMPAT_15 as doing nothing
- Add COMPAT_15 to all the kernel that had COMPAT_14, for the sake of coherency
- Remove the only occurences of #ifdef COMPAT_15 in the tree: for the ARM
ports, COMPAT_15 was always used in conjunction with EXEC_AOUT. Only EXEC_AOUT
matters here.

This address kern/18407

Oops! forgot "options" in previous commit. Pointed out by freza@, thanks!

Make PaX mprotect(2) restrictions more accessible.

On amd64, sparc64, i386, and alpha, they will be compiled in and disabled
by default. That means that to use them you either enable the "global"
knob with sysctl, or use paxctl(1) to enable it on a per-program basis.

On sparc and macppc just include a commentd out line in the GENERIC kernel.

branches: 1.192.2; 1.192.4;
PR/34283: Gene ENonymous: Add IPFILTER_LOOKUP to the default kernel options
Also remove CCITT,NS,NIP

Remove obsolete #options VERIFIED_EXEC, found by grep(1).

Disable SYSTRACE by default on all kernels (discussed with core)

branches: 1.189.2;
spc(4) can also attach to pcmcia(4), as was already in hpcmips/GENERIC
for quite some time. Add it to all systems that have pcmcia SCSI.

Pointed out by Bj�rn Johannesson <rherdware@yahoo.com> in private mail,
OK'd by matt@

Add CARP to GENERIC kernel configs. CARP is not enabled by default.

ok: christos

branches: 1.187.4;
Add stf to all kernel configs which have INET6 and gif, except the INSTALL
ones and those for specific machines of developers. PR 32304.

OK'ed by rpaulo.

N.B. stf is a cloning device, so it still must be enabled by
"ifconfig stf0 create".

branches: 1.186.2;
add commented out DBRI_* options

branches: 1.185.2; 1.185.4;
Remove 'count' argument for pseudo-devices that ignore it
(vnd, bpfilter, ppp, gif, gre, tun, sl, strip, faith, stf).

bpfilter doesn't accept count anymore.

branches: 1.183.2;
Add commented out UDF file-system entry in all GENERIC configurations.

branches: 1.182.2; 1.182.4;
Add (commented out) Veriexec options and pseudo-device to GENERIC kernels,
and remove the i386 GENERIC_VERIEXEC config.

Adjust comments for options FFS_NO_SNAPSHOT.

XXX: This option should be mentioned in options(4).

Initial addition of tmpfs, an efficient memory file-system. This project
was developed as part of Google's Summer of Code 2005 program. This
change adds the kernel code, the mount_tmpfs utility, a regression test
suite and does all other related changes to integrate these.

The file-system is still *experimental*. Therefore, it is disabled by
default in all kernels. However, as typically done, a commented-out
entry is added in them to ease its setup.

Note that I haven't commited the required mountd(8) changes to be able
to export tmpfs file-systems because NFS support is still very unstable
and because, before enabling it, I'd like to do some other changes.

OK'ed by my project mentor, William Studenmund (wrstuden@).

Enable ptyfs by default on the non-install and non small/tiny/ramdisk kernels

64 bit inode changes.

revert "defflag VMSWAP" changes for now.
there seems to be far more people who don't want to edit
their kernel config files than i thought.

add "options VMSWAP" to non INSTALL kernels.

Add support for reading cloop2 compressed filesystem image,
enable by putting VND_COMPRESSION into kernel config file.
Written by Cliff Wright, polished up slightly by me.

add dbri audio driver

added Tadpole TS102 SBus-PCMCIA bridge driver (tslot)

Add (commented out) IPSEC_NAT_T option.

branches: 1.171.2;
Add file-system PTYFS (commented out) so that people know its existence.

Ok'ed by Christos Zoulas and Hubert Feyrer.

- Rename options NEW_BUFQ_STRATEGY -> options BUFQ_READPRIO.
(still commented out)
- Add (also commented out) options BUFQ_PRIOCSCAN.

Suggested by perry and soda on tech-kern.
Please refer options(4) for details for these options.

branches: 1.169.4;
Invert FFS_SNAPSHOT to FFS_NO_SNAPSHOT

Add 'option FFS_SNAPSHOT' to most of the config files.
Commented out for kernels that appear to hace space constraints.

Add file system snapshots to kernel configs.

- Ffs internal snapshots get compiled in unconditionally.

- File system snapshot device fss(4) added to all kernel configs that
have a disk. Device is commented out on all non-GENERIC kernels.

Reviewed by: Jason Thorpe <thorpej@netbsd.org>

Sprinkle options UFS_DIRHASH on GENERIC kernels. It's presently
commented out and labeled experimental pending further review and
testing.

branches: 1.165.2;
Add tap(4) support to a random^Wcarefully chosen set of kernel configs.
All those kernels have a line for both tun and bridge, and if either is
commented out, tap is commented out also. With the exception of i386's
GENERIC_TINY.

XXX: we _need_ some way of making this more simple.

branches: 1.164.4;
Add COMPAT_BSDPTY to the rest of the config files.

IPv4 PIM support, based on a submission from Pavlin Radoslavov posted on
tech-net@

add entries for spif/stty/sbpp. final part of PR#26061.

Add "options SYSCTL_INCLUDE_DESCR" to a lot of configs, but commented
out in most of them.

options<space> police.

Enable the `nell' pcmcia bridge.

Options FULL_SPARC_BUS_SPACE is gone.

Add options P1003_1B_SEMAPHORE
to all GENERIC-like kernel config files where SYSV* options were already
present (commented out if the SYSV* options are commented out).
Fix lib/25897 and lib/25898.

Add (commented out) ALTQ options to all GENERIC-like files

have pf and pflog pseudo-device (commented out).
reviewed by matt, perry, christos

ptm is now mandatory, depends on pty, and can be disabled with -DNO_DEV_PTM

Add pseudo-device ptm on all the generic flavored kernels.

add COMPAT_20

Add comment to indicate that the SunSwift Sbus HME/FAS366 SCSI
combination board attaches esp* at sbus*; it's not just "older proms"

add some SUN4D stuff.
zs and zstty no longer need "needs-count" or "needs-flag",
so get rid of those and wild-card the extra zs devices on SUN4D.

branches: 1.149.2;
Fix commented out pcmcia entries: adjust comments, add FULL_SPARC_BUS_SPACE,
adapt wd* at pcmcia to new atabus attachment, and add wi* at pcmcia.
Noticed by Michael Wolfson.

Add COMPAT_16.

branches: 1.147.2;
Add pseudo-device ksyms.

Bye Bye UCONSOLE

Make BRIDGE_IPF an option, and document it. Add it (commented) to GENERIC.
Let brconfig tell whether the bridge is using the ipfilter hook, or not.

Fix typo (responsiness -> responsiveness).

Add NEW_BUFQ_STRATEGY (disabled by default).

Uncomment audioamd0 at obio0.

Added commented out cgd(4)s to GENERIC configs.

add SYSTRACE; approved perry.

Add one space between "#option" and "<tab>IPFILTER_DEFAULT_BLOCK"

Added (commented out) IPFILTER_DEFAULT_BLOCK.

enable USERCONF by default; it's small and extremely useful to have available.

Driver for the Sun ZX/Leo framebuffer. This would be called leo, but the
amiga port already has a driver by that name.

Enable "pseudo-device clockctl" in all kernels, except
installation related kernels (INSTALL* and RAMDISK*).
This enables rc.conf(5) $ntpd_chroot to be used "out of the box"

branches: 1.134.2; 1.134.4;
- Enable NFS_BOOT_DHCP (as well as the existing NFS_BOOT_BOOTPARAM).
DHCP/Bootp is tried before bootparams in the MI nfs mountroot code.
- Change the order in boot.net from "bootparams then bootp" to
"bootp then bootparams", to be consistent with the MI nfs mountroot code.

(Consistency with other NetBSD ports is good, and things still work
for sites that run bootparams but not dhcp/bootp, although I'd argue that
dhcp/bootp is much easier to setup and manage and is easier to debug
than our rpc.bootparamd...)

Per discussion with Paul Kranenburg and Matt Green.

Add the INCLUDE_CONFIG_FILE option to all config files. In config
files that are generic (ie, GENERIC, GENERICSBC, GENERIC32, ALL, or
ALPHA), it is uncommented.

Add commented-out USERCONF option. Mainly useful for install media
and can be optionally enabled based on miniroot and ramdisk size
requirements.

Update description for icsphy.

add options PIPE_SOCKETPAIR to individual kernel configs
the option is commented out on everything but kernels I was able
to recognize as INSTALL-like or ones for small memory machines

Add new RF_* options for RAIDframe bits that are no longer built by default.

While we're here, enable RAIDframe (and RAID_AUTOCONFIG) by default for
architectures that I'm comfortable can deal with it being on by default.

Also: bump the number of 'raid' devices from 4 to 8, since 4 seems to
be insufficient in practise.

Add PPPoE to all generic kernels that should be able to use it.
XXX TODO: do this for INSTALL kernels too, add sysinst support and make the
XXX needed binaries available on the ramdisk root fs.

Add a blurb to the top of all GENERIC files. This serves three purposes:
- to clarify some terminology
- to clarify the intention of the GENERIC file
- to cross-reference some useful man pages

The bridge(4) pseudo-device no longer requires the port to
__HAVE_GENERIC_SOFT_INTERRUPTS, so add it back to all GENERIC configs.

cleanup:
options SPACE TAB
makeoptions TAB
psuedo-device TAB
remove trailing whitespace
replace multiple spaces -> tabs
options "FOO" -> options FOO
options "FOO=bar" -> options FOO=bar
options "FOO=\"bar\"" -> options FOO="\"bar\""

- pull in opt_kgdb.h where necessary
- replace opt_kgdb_machdep.h with opt_kgdb.h
- defparam opt_kgdb.h:
KGDB_DEV KGDB_DEVNAME KGDB_DEVADDR KGDB_DEVRATE KGDB_DEVMODE
- move from opt_ddbparam.h to opt_ddb.h:
DDB_FROMCONSOLE DDB_ONPANIC DDB_HISTORY_SIZE DDB_BREAK_CHAR SYMTAB_SPACE
- replace KGDBDEV with KGDB_DEV
- replace KGDBADDR with KGDB_DEVADDR
- replace KGDBMODE with KGDB_DEVMODE
- replace KGDBRATE with KGDB_DEVRATE
- use `9600' instead of `0x2580' for 9600 baud rate
- use correct quotes for options KGDB_DEVNAME="\"com\""
- use correct quotes for options KGDB_DEV="17*256+0"
- remove unnecessary dependancy on Makefile for kgdb_stub.o
- minor whitespace cleanup

branches: 1.123.6;
Comment out bridge pseudo devices from ports that don't
__HAVE_GENERIC_SOFT_INTERRUPTS. bridge(4) doesn't compile there.

Add bridge pseudo devices to GENERIC configs

branches: 1.121.2;
Add System V semaphore resource limits to each GENERIC file that has an
option for System V semaphores. It appears that there are no overrides
in the code and each file has the following added.

options SYSVSEM # System V semaphores
+#options SEMMNI=10 # number of semaphore identifiers
+#options SEMMNS=60 # number of semaphores in system
+#options SEMUME=10 # max number of undo entries per process
+#options SEMMNU=30 # number of undo structures in system
options SYSVSHM # System V shared memory

If anyone thinks that this is incorrect for any of these files, please
correct it.

Note - the i386 port was not forgotten. It was done separately.

vlan does not belong to the IPv6 devices (gif, stf, ...), so seperate it
visually.

branches: 1.119.2;
Add pseudo-device vlan

Hmm- probably really ought to put ses into sparc GENERIC, since sparc
machines are one is very likely to run into SES units (what with all
the D1000's && A1000s out there now). I'll do it in sparc64 as soon
as I get that running for myself.

don't specify number of ptys if >= 16 (current default initial number)
pty comments: normalize and g/c what is no longer relevant

move "options PULLDOWN_TEST" into sys/sys/mbuf.h (in #ifdef _KERNEL),
as it is no wthe default setting for everyone.

the reason we still use the name "PULLDOWN_TEST" while it is now default:
kame code sharing.

Moving to a default of 64 PTYs.

remove COMPAT_AOUT option.

Add com* at obio0. (Tadpole & JavaStation)

Comment out EON ISO-over-ip tunneling pseudo-driver, and document as
broken/fragile. Unlikely to be of much use, and confuses new users
when their system crashes when they, or their dhclient stumble over
it. See kern/10500, kern/8994 for the gory details.

add PULLDOWN_TEST for all the platforms.
XXX should be moved to somewhere else when stabilized

Remove prefix construction for softdeps. Add SOFTDEP option to GENERIC.

Enable SUN4_MMU3L (sun4/400 3-level MMU support)

Update entries for VME devices ie[1-4].

branches: 1.107.2;
Remove the obsolete config fragments for kernel crypto, because the IPsec
crypto code is now in the kernel source tree.

Add tadpole specific devices.

branches: 1.105.2;
Add (sometimes commented out) MIIVERBOSE option.

add stf pseudo interface (commented out due to possible security risks)

Comment-out the RASTERCONSOLE_{BG,FG} color settings; they represent
the default initialization.

Do the "<space><tab>" thing with the RAID_AUTOCONFIG option.

Defopt 'RAID_AUTOCONFIG'. Adding 'options RAID_AUTOCONFIG' turns on
the component auto-detection and auto-configuration of RAID sets.
Also, add "#options RAID_AUTOCONFIG" to the GENERIC config files.

remove `flags' from sun4 zs declarations; the driver doesn't use it.

Correct comments on KGDB_* entries.

Enable the hme ethernet driver.

Add bpp (parallel port) device.

Add commented out "ident"-command

Add overlay to kernel configs.

bring in content of GENERIC.v6 into GENERIC.
remove GENERIC.v6 file (as it is part of GENERIC now).

"faith" interface is commented out by default as it is not really for
general use.
IPsec items are commented out as well, though we can enable "options IPSEC"
without export-related issue ("options IPSEC" will enable authentication
portion only). We may need to think about it again.

if you have problem compiling with INET6 on archs I do not have access to,
please contact me.

XXX what to do with arch/arm32/SHARK{,.v6}?

Add commented out option SOFTDEP to all GENERIC kernels.

Nuke TCP_COMPAT_42. Use sysctl to enable it if required.

branches: 1.91.2; 1.91.4;
Add in the Coda file system and pseudo device.

branches: 1.90.2;
Document what qec, be and qe is.
Thanks to Jason Thorpe for explaining!

It's time to be COMPAT_14.

adapt to mi VME attachment (sorry for being late)

make the vme stuff compile again; I am not sure this is correct as I don't
have the hardware to test, but it has been broken for 3+ weeks now. Hi
Mr. Drochner!

enable PPP_BSDCOMP, PPP_DEFLATE, PPP_FILTER, PFIL_HOOKS, IPFILTER_LOG
on the GENERIC kernels that had them commented out.
XXX: Please note, that not all the kernels have all the options defined!

Prepare entry for `hme at sbus'; commented out until driver is finished.

EXEC_ELF32 is now default. enable "rnd"

Add COMPAT_AOUT.

SPARC console is black on white, and is centered by default.

No need to disable MII devices in previous.

Comment out nell and pcmcia children until audioamd panic resolved

Update configuration to match `rasops' fixes and config glue.

Fix TAB-jump lossage in previous.

Bring sparc/sparc64 fb code and kernel configuration into line with
rcons changes.

branches: 1.76.2;
Add `qe'.

Add `be' + MII devices.
Add PCMCIA devices that are known to compile at the moment.

Add `eccmemctl' entry.

Add (commented out) 'gre' pseudo device line. Feedback is welcome.
Inspired by Klaus Klein.

Connect the PCMCIA bus.

Added a (commented out) configuration line for the RAIDframe device driver.

Add `audiocs' ("SUNW,CS4231") and `en' ("ENI-155s").

Option DDB_ONPANIC needs a value.

remove options FIFO; it's now the default

Enable NTP.

Add entries for the magma SBus serial/parallel port driver.

make UVM the default on the sparc

Define `xbox'.

We can't currently attach `audioamd' at `obio'.

Add commented out "options FFS_EI"

Remove the pager options; they're in std.sparc, and will stay there
until UVM is no longer optional.

initial import of the new virtual memory system, UVM, into -current.

UVM was written by chuck cranor <chuck@maria.wustl.edu>, with some
minor portions derived from the old Mach code. i provided some help
getting swap and paging working, and other bug fixes/ideas. chuck
silvers <chuq@chuq.com> also provided some other fixes.

this is the sparc portion.

this will be KNF'd shortly. :-)

* Correct vme addresses in `xd' and `xy' declarations.
* Renamed option: MMU_3L => SUN4_MMU3L
* Enter NFS_BOOT_PARAM option.

VME device declaration changes:
- `vmes,vmel' => `vme'
- interrupt locator is the VME interrupt priority (`pri')

Add a couple of options I forgot in last commit.

Put back `le0 at lebuffer0' for backwards compatibility.

More comments and general re-organization (group by device class) provided
by Todd Vierling.

add missing COMPAT_13 that kleink putzed

add pseudo-device rnd, commented out

* add commented out DDB_HISTORY_SIZE=100 if DDB exists in config file
* fix up use of 'options<SPACE><TAB>'

branches: 1.51.2;
Enable `reselect' and `synch negotiation' by default.

Use common zs code.

add (commented) options BLINK, per PR#4075.

add a before tab to SCSIVERBOSE

add commented out reference SCSIVERBOSE option

Change the MI audio driver so it attaches to the MD driver in the
normal way. This requires adding a line to the config files to
get audio to work again.

branches: 1.45.2;
Add `maxusers' line and set it to 32.

ie2,ie3 and ie4 are 32-bit.

clean up use of whitespace

add in the 'isp' device, for Qlogic ISP 1020-based Sbus SCSI board support

typo.

Adopt for new file system and root spec grammar.

add MSDOSFS.

branches: 1.38.2;
use pseudo-device ipfilter, not ipl.

add PFIL_HOOK and ipl, both commented.

Uncomment lebuffer devices

Move *PAGER options and `machine sparc' to std.sparc.

Declare device `audio' at sbus.

Add cgfourteen framebuffer to generic configs

update for exec changes.

add COMPAT_12.

Turn on disconnect/reselect by default on targets 4-7 on the premise that
tape devices normally are set to one of these targets. Tape devices should
be allowed to disconnect for the SCSI bus to operate acceptably.

add tcx

branches: 1.28.2;
Remove the `espdma' special case; all `esp' related dma channels are now
called `dma' on all architectures. Note: `ledma' remains in place.

Also delete a couple of unneeded `needs-flag's in files.sparc.

Add Sun4m power0 power status/control register to GENERIC configuration

Add `flags' to the esp entries: disable disconnect & synch negotiation
by default until further notice.

Change attributes of `dma', `espdma' and `ledma' (the attributes on the latter
two didn't seem to make much sense anyway..) to allow `esp' devices to be
attached to one of `sbus', `dma' and `espdma'.

Remove the wildcarded `espdma?' and `ledma?' attachments of `esp' and `le'
respectively, in favour of `dma?' and `lebuffer?' (but the latter is not
yet implemented), which seems to better match reality: additional SBus
SCSI/Lance boards call themselves `dma' and `lebuffer'.

Document the "flags" for the si and sw controllers. While I'm here,
do some re-arrangement (cleanup), and document which devices exist on
which machines, so that people can be better informed when they trim
down their kernels. There are a LOT of comments in this file now!

Update device list.

Updates for sun4m.

First-cut support for P4 framebuffers. Currently supports P4 variants
of bwtwo, cgfour, cgsix, and cgeight. Includes support for attaching
the overlay plane of the cgfour and cgeight as a bwtwo instance (a'la
SunOS).

P4 register descriptions, cgfour driver, and cgeight driver partially
derived from OpenBSD.

This code may still need polishing.

"si" and "sw" actually interrupt at level 3 (which I quickly discovered
when porting the driver).

Add forgotten `eeprom' configuration.

RCONSOLE => RASTERCONSOLE

Correct cgtwo address.

add "xy" xylogics 450/451 config stuff

vmes => vmes0

Add cgtwo0.

`si' and `sw' are scsibusses.

Add `sw' scsi adapter on obio (per Jason Thorpe, PR#1422).

Add bwtwo@obio specs (from Jason Thorpe).

si scsi driver configs.

xd definitions, from Chuck Cranor.

Add UNION option.

Update SCSI decls.

Make more generic.

Better 4/100 support.

vn -> vnd renaming, for consistency

correct ie[1234] addreses

ie[01234] and obclock

bigtime cleanup