GENERIC revision 1.145
1 1.145 perseant # $NetBSD: GENERIC,v 1.145 2003/02/27 19:22:47 perseant Exp $ 2 1.127 gmcgarry # 3 1.127 gmcgarry # GENERIC machine description file 4 1.127 gmcgarry # 5 1.127 gmcgarry # This machine description file is used to generate the default NetBSD 6 1.127 gmcgarry # kernel. The generic kernel does not include all options, subsystems 7 1.127 gmcgarry # and device drivers, but should be useful for most applications. 8 1.127 gmcgarry # 9 1.127 gmcgarry # The machine description file can be customised for your specific 10 1.127 gmcgarry # machine to reduce the kernel size and improve its performance. 11 1.127 gmcgarry # 12 1.127 gmcgarry # For further information on compiling NetBSD kernels, see the config(8) 13 1.127 gmcgarry # man page. 14 1.127 gmcgarry # 15 1.127 gmcgarry # For further information on hardware support for this architecture, see 16 1.127 gmcgarry # the intro(4) man page. For further information about kernel options 17 1.127 gmcgarry # for this architecture, see the options(4) man page. For an explanation 18 1.127 gmcgarry # of each device driver in this file see the section 4 man page for the 19 1.127 gmcgarry # device. 20 1.1 deraadt 21 1.127 gmcgarry include "arch/sparc/conf/std.sparc" 22 1.96 hubertf 23 1.133 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 1.133 atatat 25 1.145 perseant #ident "GENERIC-$Revision: 1.145 $" 26 1.45 pk 27 1.45 pk maxusers 32 28 1.32 mrg 29 1.55 pk ## System kernel configuration. See options(4) for more detail. 30 1.55 pk 31 1.55 pk 32 1.24 thorpej # Options for variants of the Sun SPARC architecure. 33 1.55 pk # We currently support three architecture types; at least one is required. 34 1.43 lukem options SUN4 # sun4/100, sun4/200, sun4/300 35 1.43 lukem options SUN4C # sun4c - SS1, 1+, 2, ELC, SLC, IPC, IPX, etc. 36 1.43 lukem options SUN4M # sun4m - SS10, SS20, Classic, etc. 37 1.24 thorpej 38 1.109 pk options SUN4_MMU3L # sun4/400 3-level MMU 39 1.1 deraadt 40 1.55 pk ## System options specific to the sparc machine type 41 1.55 pk 42 1.55 pk # Blink the power LED on some machines to indicate the system load. 43 1.55 pk #options BLINK 44 1.55 pk 45 1.55 pk ## Use a faster console than the PROM's slow drawing routines. Not needed 46 1.55 pk ## for headless (no framebuffer) machines. 47 1.77 ad options RASTERCONSOLE # fast rasterop console 48 1.79 ad options FONT_GALLANT12x22 # the console font 49 1.79 ad #options FONT_BOLD8x16 # a somewhat smaller font 50 1.103 pk ## default console colors: black-on-white; this can be changed 51 1.103 pk ## using the following two options. 52 1.103 pk #options RASTERCONSOLE_FGCOL=WSCOL_BLACK 53 1.103 pk #options RASTERCONSOLE_BGCOL=WSCOL_WHITE 54 1.55 pk 55 1.55 pk #### System options that are the same for all ports 56 1.55 pk 57 1.55 pk ## Root device configuration: change the ?'s if you are going to use a 58 1.55 pk ## nonstandard root partition (other than where the kernel is booted from) 59 1.55 pk ## and/or nonstandard root type (not ffs or nfs). Normally this can be 60 1.55 pk ## automagically determined at boot time. 61 1.55 pk 62 1.55 pk config netbsd root on ? type ? 63 1.55 pk 64 1.55 pk ## System call tracing (see ktrace(1)). 65 1.55 pk options KTRACE 66 1.140 provos options SYSTRACE # system call vetting via systrace(1) 67 1.55 pk 68 1.55 pk ## Collect statistics on kernel malloc's and free's. This does have a 69 1.55 pk ## significant performance hit on slower machines, so it is intended for 70 1.55 pk ## diagnostic use only. 71 1.55 pk #options KMEMSTATS 72 1.55 pk 73 1.55 pk ## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 74 1.43 lukem options SYSVMSG # System V message queues 75 1.43 lukem options SYSVSEM # System V semaphores 76 1.125 lukem #options SEMMNI=10 # number of semaphore identifiers 77 1.125 lukem #options SEMMNS=60 # number of semaphores in system 78 1.125 lukem #options SEMUME=10 # max number of undo entries per process 79 1.125 lukem #options SEMMNU=30 # number of undo structures in system 80 1.43 lukem options SYSVSHM # System V shared memory 81 1.43 lukem #options SHMMAXPGS=1024 # 1024 pages is the default 82 1.24 thorpej 83 1.55 pk ## Loadable kernel module support; still under development. 84 1.55 pk options LKM 85 1.130 jdolecek 86 1.137 lukem options USERCONF # userconf(4) support 87 1.130 jdolecek #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 88 1.143 junyoung 89 1.144 wiz # Enable experimental buffer queue strategy for better responsiveness under 90 1.143 junyoung # high disk I/O load. Use it with caution - it's not proven to be stable yet. 91 1.143 junyoung #options NEW_BUFQ_STRATEGY 92 1.55 pk 93 1.134 lukem ## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 94 1.59 pk options NFS_BOOT_BOOTPARAM 95 1.59 pk #options NFS_BOOT_BOOTP 96 1.134 lukem options NFS_BOOT_DHCP 97 1.55 pk 98 1.55 pk #### Debugging options 99 1.55 pk 100 1.55 pk ## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 101 1.55 pk ## serial console break or keyboard reset, where the PROM would normally 102 1.55 pk ## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 103 1.55 pk #options DDB # kernel dynamic debugger 104 1.52 lukem #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 105 1.69 pk #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 106 1.55 pk 107 1.55 pk ## You may also use gdb, on another computer connected to this machine over 108 1.124 lukem ## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 109 1.124 lukem ## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 110 1.124 lukem ## the minor device number encodes the PROM enumeration of the serial ports, 111 1.124 lukem ## i.e.: 112 1.124 lukem ## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 113 1.124 lukem ## (Note: ttyc and ttyd are available only on some sun4 models) 114 1.124 lukem #options KGDB # support for kernel gdb 115 1.124 lukem #options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 116 1.124 lukem #options KGDB_DEVRATE=38400 # baud rate 117 1.24 thorpej 118 1.55 pk 119 1.55 pk ## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 120 1.55 pk ## such that gdb(1) can be used on a kernel coredump. 121 1.55 pk 122 1.125 lukem #makeoptions DEBUG="-g" 123 1.55 pk 124 1.55 pk 125 1.55 pk ## Adds code to the kernel that does internal consistency checks, and will 126 1.55 pk ## cause the kernel to panic if corruption of internal data structures 127 1.55 pk ## is detected. 128 1.55 pk #options DIAGNOSTIC # extra kernel sanity checking 129 1.55 pk 130 1.55 pk ## Enable (possibly expensive) debugging code that may also display messages 131 1.55 pk ## on the system console 132 1.55 pk #options DEBUG 133 1.55 pk 134 1.55 pk ## Make SCSI error messages more verbose when explaining their meanings. 135 1.55 pk options SCSIVERBOSE 136 1.105 augustss 137 1.105 augustss options MIIVERBOSE # verbose PHY autoconfig messages 138 1.55 pk 139 1.55 pk ## `INSECURE' turns off the kernel security level (securelevel = 0 always). 140 1.55 pk ## This allows writing to /dev/mem, loading kernel modules while multi-user, 141 1.55 pk ## and other insecurities good only for development work. Do not use this 142 1.55 pk ## option on a production machine. 143 1.55 pk #options INSECURE 144 1.55 pk 145 1.55 pk ## Allow non-root users to grab /dev/console with programs such as xconsole. 146 1.55 pk ## `xconsole' therefore does not need setuid root with this option enabled. 147 1.55 pk #options UCONSOLE 148 1.55 pk 149 1.55 pk ## `FDSCRIPTS' allows non-readable but executable scripts by providing a 150 1.55 pk ## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 151 1.55 pk ## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 152 1.55 pk ## opaque file mechanism. Perl calls this "secure setuid scripts." 153 1.55 pk 154 1.55 pk #options FDSCRIPTS 155 1.55 pk #options SETUIDSCRIPTS 156 1.55 pk 157 1.55 pk ## Options for compatibility with previous releases foreign system binaries. 158 1.55 pk ## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 159 1.55 pk ## additional user-level utilities or system configuration files. See 160 1.55 pk ## compat_sunos(8) and compat_svr4(8). 161 1.55 pk 162 1.43 lukem options COMPAT_43 # 4.3BSD system interfaces 163 1.43 lukem options COMPAT_10 # NetBSD 1.0 binary compatibility 164 1.43 lukem options COMPAT_11 # NetBSD 1.1 binary compatibility 165 1.43 lukem options COMPAT_12 # NetBSD 1.2 binary compatibility 166 1.54 mjacob options COMPAT_13 # NetBSD 1.3 binary compatibility 167 1.89 augustss options COMPAT_14 # NetBSD 1.4 binary compatibility 168 1.43 lukem options COMPAT_SUNOS # SunOS 4.x binary compatibility 169 1.43 lukem options COMPAT_SVR4 # SunOS 5.x binary compatibility 170 1.1 deraadt 171 1.55 pk ## File systems. You probably need at least one of FFS or NFS. 172 1.43 lukem file-system FFS # Berkeley Fast Filesystem 173 1.43 lukem file-system NFS # Sun NFS-compatible filesystem client 174 1.43 lukem file-system KERNFS # kernel data-structure filesystem 175 1.43 lukem file-system NULLFS # NULL layered filesystem 176 1.95 wrstuden file-system OVERLAY # overlay file system 177 1.43 lukem file-system MFS # memory-based filesystem 178 1.43 lukem file-system FDESC # user file descriptor filesystem 179 1.43 lukem file-system UMAPFS # uid/gid remapping filesystem 180 1.43 lukem file-system LFS # Log-based filesystem (still experimental) 181 1.43 lukem file-system PORTAL # portal filesystem (still experimental) 182 1.43 lukem file-system PROCFS # /proc 183 1.43 lukem file-system CD9660 # ISO 9660 + Rock Ridge file system 184 1.43 lukem file-system UNION # union file system 185 1.43 lukem file-system MSDOSFS # MS-DOS FAT filesystem(s). 186 1.91 phil file-system CODA # Coda File System; also needs vcoda (below) 187 1.43 lukem 188 1.55 pk ## File system options. 189 1.43 lukem options NFSSERVER # Sun NFS-compatible filesystem server 190 1.43 lukem options QUOTA # FFS quotas 191 1.63 pk #options FFS_EI # FFS Endian Independent support 192 1.125 lukem options SOFTDEP # FFS soft updates support. 193 1.94 itojun 194 1.55 pk ## Network protocol support. In most environments, INET is required. 195 1.57 pk options INET # IP (Internet Protocol) v4 196 1.94 itojun options INET6 # IPV6 197 1.94 itojun #options IPSEC # IP security 198 1.94 itojun #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 199 1.94 itojun #options IPSEC_DEBUG # debug for IP security 200 1.57 pk #options GATEWAY # packet forwarding ("router switch") 201 1.57 pk #options MROUTING # packet forwarding of multicast packets 202 1.57 pk #options DIRECTED_BROADCAST # allow broadcasts through routers 203 1.57 pk options NS # Xerox NS networking 204 1.57 pk #options NSIP # Xerox NS tunneling over IP 205 1.57 pk options ISO,TPIP # OSI networking 206 1.112 sommerfe #options EON # OSI tunneling over IP 207 1.57 pk #options CCITT,LLC,HDLC # X.25 packet switched protocol 208 1.75 pk #options NETATALK # AppleTalk (over Ethernet) protocol 209 1.67 pk options NTP # Network Time Protocol in-kernel support 210 1.57 pk #options PPS_SYNC # Add serial line synchronization for NTP 211 1.86 christos options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 212 1.86 christos options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 213 1.139 martti #options IPFILTER_DEFAULT_BLOCK # block all packets by default 214 1.86 christos options PPP_BSDCOMP # Add BSD compression to ppp device 215 1.86 christos options PPP_DEFLATE # Add deflate (libz) compression to ppp device 216 1.86 christos options PPP_FILTER # Add active filters for ppp (via bpf) 217 1.1 deraadt 218 1.1 deraadt 219 1.55 pk 220 1.57 pk #### Main bus and CPU .. all systems. 221 1.1 deraadt mainbus0 at root 222 1.1 deraadt cpu0 at mainbus0 223 1.1 deraadt 224 1.55 pk #### Bus types found on SPARC systems. 225 1.55 pk 226 1.24 thorpej sbus0 at mainbus0 # sun4c 227 1.24 thorpej obio0 at mainbus0 # sun4 and sun4m 228 1.87 christos sparcvme0 at mainbus0 # sun4 229 1.22 pk iommu0 at mainbus0 # sun4m 230 1.22 pk sbus0 at iommu0 # sun4m 231 1.87 christos sparcvme0 at iommu0 # sun4m 232 1.88 drochner vme0 at sparcvme0 # mi VME attachment 233 1.64 pk 234 1.64 pk ## SBus expander box 235 1.64 pk xbox* at sbus? slot ? offset ? 236 1.64 pk sbus* at xbox? 237 1.72 pk 238 1.72 pk ## SBus to PCMCIA bridge 239 1.80 abs # Currently enabling nell* with audioamd* causes panic at attach 240 1.80 abs #nell* at sbus? slot ? offset ? # PCMCIA bridge 241 1.80 abs #pcmcia* at nell? 242 1.1 deraadt 243 1.55 pk #### Standard system devices -- all required for a given architecture 244 1.24 thorpej 245 1.55 pk ## Auxiliary system registers on sun4c and sun4m 246 1.24 thorpej auxreg0 at mainbus0 # sun4c 247 1.22 pk auxreg0 at obio0 # sun4m 248 1.106 matt auxiotwo0 at obio0 # only on Tadpole SPARCbook. 249 1.27 abrown 250 1.55 pk ## Power status and control register on Sun4m systems 251 1.27 abrown power0 at obio0 252 1.24 thorpej 253 1.55 pk ## Mostek clock found on 4/300, sun4c, and sun4m systems. 254 1.55 pk ## The Mostek clock NVRAM is the "eeprom" on sun4/300 systems. 255 1.24 thorpej clock0 at mainbus0 # sun4c 256 1.22 pk clock0 at obio0 # sun4m 257 1.24 thorpej clock0 at obio0 addr 0xf2000000 # sun4/300 258 1.24 thorpej 259 1.55 pk ## Intersil clock found on 4/100 and 4/200 systems. 260 1.24 thorpej oclock0 at obio0 addr 0xf3000000 # sun4/200 261 1.24 thorpej oclock0 at obio0 addr 0x03000000 # sun4/100 262 1.24 thorpej 263 1.55 pk ## Memory error registers. 264 1.24 thorpej memreg0 at mainbus0 # sun4c 265 1.22 pk memreg0 at obio0 # sun4m 266 1.24 thorpej memreg0 at obio0 addr 0xf4000000 # sun4/200 and sun4/300 267 1.24 thorpej memreg0 at obio0 addr 0x04000000 # sun4/100 268 1.74 pk 269 1.74 pk ## ECC memory control 270 1.74 pk eccmemctl0 at mainbus0 # sun4m 271 1.24 thorpej 272 1.55 pk ## Timer chip found on 4/300, sun4c, and sun4m systems. 273 1.24 thorpej timer0 at mainbus0 # sun4c 274 1.22 pk timer0 at obio0 # sun4m 275 1.24 thorpej timer0 at obio0 addr 0xef000000 # sun4/300 276 1.24 thorpej 277 1.55 pk ## EEPROM found on 4/100 and 4/200 systems. Note that the 4/300 278 1.55 pk ## doesn't use this driver; the `EEPROM' is in the NVRAM on the 279 1.55 pk ## Mostek clock chip on 4/300 systems. 280 1.24 thorpej eeprom0 at obio0 addr 0xf2000000 # sun4/200 281 1.24 thorpej eeprom0 at obio0 addr 0x02000000 # sun4/100 282 1.24 thorpej 283 1.55 pk 284 1.55 pk #### Serial port configuration 285 1.55 pk 286 1.55 pk ## Zilog 8530 serial chips. Each has two-channels. 287 1.55 pk ## zs0 is ttya and ttyb. zs1 is the keyboard and mouse. 288 1.24 thorpej zs0 at mainbus0 # sun4c 289 1.24 thorpej zs0 at obio0 # sun4m 290 1.100 pk zs0 at obio0 addr 0xf1000000 level 12 # sun4/200 and sun4/300 291 1.100 pk zs0 at obio0 addr 0x01000000 level 12 # sun4/100 292 1.100 pk zstty0 at zs0 channel 0 # ttya 293 1.100 pk zstty1 at zs0 channel 1 # ttyb 294 1.50 gwr 295 1.24 thorpej zs1 at mainbus0 # sun4c 296 1.24 thorpej zs1 at obio0 # sun4m 297 1.100 pk zs1 at obio0 addr 0xf0000000 level 12 # sun4/200 and sun4/300 298 1.100 pk zs1 at obio0 addr 0x00000000 level 12 # sun4/100 299 1.100 pk kbd0 at zs1 channel 0 # keyboard 300 1.100 pk ms0 at zs1 channel 1 # mouse 301 1.100 pk 302 1.100 pk zs2 at obio0 addr 0xe0000000 level 12 # sun4/300 303 1.100 pk zstty2 at zs2 channel 0 # ttyc 304 1.100 pk zstty3 at zs2 channel 1 # ttyd 305 1.113 matt 306 1.125 lukem ## NS16x50 serial chips and clones. Present on the 307 1.113 matt ## Sun JavaStation-1 and Tadpole SPARCbook 3 308 1.113 matt com* at obio0 # sun4m 309 1.66 pk 310 1.97 cjs # Parallel port. 311 1.97 cjs bpp* at sbus? slot? offset ? 312 1.66 pk 313 1.66 pk ## Magma Serial/Parallel driver 314 1.66 pk magma* at sbus? slot ? offset ? 315 1.66 pk mtty* at magma? 316 1.66 pk mbpp* at magma? 317 1.66 pk 318 1.75 pk ## PCMCIA serial interfaces 319 1.80 abs #com* at pcmcia? 320 1.80 abs #pcmcom* at pcmcia? 321 1.80 abs #com* at pcmcom? 322 1.24 thorpej 323 1.55 pk #### Disk controllers and disks 324 1.55 pk 325 1.26 pk # 326 1.26 pk 327 1.55 pk ## The following flags may be set for the NCR53c94 based esp driver: 328 1.55 pk ## bits 0-7: disable disconnect/reselect for the corresponding target 329 1.55 pk ## bits 8-15: disable synchronous negotiation for target [bit-8] 330 1.55 pk 331 1.55 pk ## sun4/300, sun4c, sun4m on-board SCSI, and FSBE/S SBus SCSI cards. 332 1.55 pk ## Both `dma' and `esp' are needed in all cases. 333 1.55 pk ## Two kinds of additional SBus SCSI interfaces are available. One uses 334 1.55 pk ## "esp at sbus" like the sun4c on-board; the other uses "esp at dma". 335 1.55 pk 336 1.55 pk ## sun4/300 SCSI - an NCR53c94 or equivalent behind 337 1.55 pk ## an LSI Logic DMA controller 338 1.55 pk 339 1.24 thorpej dma0 at obio0 addr 0xfa001000 level 4 # sun4/300 340 1.55 pk esp0 at obio0 addr 0xfa000000 level 4 flags 0x0000 # sun4/300 341 1.1 deraadt 342 1.55 pk dma0 at sbus0 slot ? offset ? # sun4c/sun4m 343 1.51 pk esp0 at sbus0 slot ? offset ? flags 0x0000 # sun4c 344 1.51 pk esp0 at dma0 flags 0x0000 # sun4m 345 1.24 thorpej 346 1.55 pk # FSBE/S SCSI 347 1.55 pk dma* at sbus? slot ? offset ? # SBus 348 1.55 pk esp* at sbus? slot ? offset ? flags 0x0000 # SBus (older proms) 349 1.55 pk esp* at dma? flags 0x0000 # SBus 350 1.24 thorpej 351 1.55 pk scsibus* at esp? 352 1.55 pk 353 1.55 pk ## Qlogic ISP SBus SCSI Card 354 1.42 cgd isp* at sbus? slot ? offset ? 355 1.55 pk scsibus* at isp? 356 1.42 cgd 357 1.55 pk ## NCR5380-based "Sun SCSI 3" VME SCSI controller. 358 1.55 pk ## This driver has several flags which may be enabled by OR'ing 359 1.55 pk ## the values and using the "flags" directive. 360 1.55 pk ## Valid flags are: 361 1.55 pk ## 362 1.55 pk ## 0x01 Use DMA (may be polled) 363 1.55 pk ## 0x02 Use DMA completion interrupts 364 1.55 pk ## 0x04 Allow disconnect/reselect 365 1.55 pk ## 366 1.55 pk ## E.g. the following would enable DMA, interrupts, and reselect: 367 1.88 drochner ## si0 at vme0 addr 0x200000 irq 3 vect 0x40 flags 0x07 368 1.55 pk ## 369 1.55 pk ## By default, DMA is enabled in the driver. 370 1.25 pk 371 1.88 drochner si0 at vme0 addr 0x200000 irq 2 vect 0x40 372 1.55 pk scsibus* at si? 373 1.24 thorpej 374 1.55 pk ## NCR5380-based "SCSI Weird" on-board SCSI interface found 375 1.55 pk ## on sun4/100 systems. The flags are the same as the "si" 376 1.55 pk ## controller. Note, while DMA is enabled by default, only 377 1.55 pk ## polled DMA works at this time, and reselects do not work 378 1.55 pk ## on this particular controller. 379 1.1 deraadt 380 1.55 pk sw0 at obio0 addr 0x0a000000 level 3 381 1.55 pk scsibus* at sw? 382 1.24 thorpej 383 1.75 pk ## PCMCIA SCSI controllers 384 1.80 abs #aic* at pcmcia? 385 1.80 abs #scsibus* at aic? 386 1.75 pk 387 1.75 pk 388 1.55 pk ## These entries find devices on all SCSI busses and assign 389 1.55 pk ## unit numbers dynamically. 390 1.55 pk sd* at scsibus? target ? lun ? # SCSI disks 391 1.55 pk st* at scsibus? target ? lun ? # SCSI tapes 392 1.55 pk cd* at scsibus? target ? lun ? # SCSI CD-ROMs 393 1.55 pk ch* at scsibus? target ? lun ? # SCSI changer devices 394 1.55 pk ss* at scsibus? target ? lun ? # SCSI scanners 395 1.118 mjacob ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE 396 1.55 pk uk* at scsibus? target ? lun ? # unknown SCSI 397 1.23 pk 398 1.9 pk 399 1.55 pk ## Xylogics 753 or 7053 VME SMD disk controllers and disks, found 400 1.55 pk ## on sun4 systems. 401 1.88 drochner xdc0 at vme0 addr 0xee80 irq 3 vect 0x44 402 1.88 drochner xdc1 at vme0 addr 0xee90 irq 3 vect 0x45 403 1.88 drochner xdc2 at vme0 addr 0xeea0 irq 3 vect 0x46 404 1.88 drochner xdc3 at vme0 addr 0xeeb0 irq 3 vect 0x47 405 1.9 pk xd* at xdc? drive ? 406 1.16 chuck 407 1.55 pk ## Xylogics 451 or 451 VME SMD disk controllers and disks, found 408 1.55 pk ## on sun4 systems. 409 1.88 drochner xyc0 at vme0 addr 0xee40 irq 3 vect 0x48 410 1.88 drochner xyc1 at vme0 addr 0xee48 irq 3 vect 0x49 411 1.16 chuck xy* at xyc? drive ? 412 1.10 pk 413 1.24 thorpej 414 1.55 pk ## Floppy controller and drive found on SPARCstations. 415 1.55 pk 416 1.55 pk fdc0 at mainbus0 # sun4c controller 417 1.55 pk fdc0 at obio0 # sun4m controller 418 1.55 pk fd* at fdc0 # the drive itself 419 1.55 pk 420 1.75 pk ## PCMCIA IDE controllers 421 1.80 abs #wdc* at pcmcia? 422 1.80 abs #wd* at wdc? 423 1.75 pk 424 1.55 pk ## A disk-like interface to files. Can be used to create floppy, CD, 425 1.55 pk ## miniroot images, etc. 426 1.55 pk 427 1.55 pk pseudo-device vnd 4 428 1.55 pk 429 1.55 pk ## Concatenated and striped disks; with this, you can create a software-based 430 1.55 pk ## disk array similar to a "RAID 0" setup. See ccd(4). 431 1.55 pk 432 1.55 pk pseudo-device ccd 4 433 1.141 elric 434 1.141 elric ## Cryptographic disk devices; See cgd(4) 435 1.141 elric 436 1.141 elric #pseudo-device cgd 4 437 1.71 oster 438 1.71 oster ## RAIDframe disk driver: software RAID driver. See raid(4). 439 1.71 oster 440 1.129 oster pseudo-device raid 8 441 1.129 oster options RAID_AUTOCONFIG # auto-configuration of RAID components 442 1.129 oster # Options to enable various other RAIDframe RAID types. 443 1.129 oster # options RF_INCLUDE_EVENODD=1 444 1.129 oster # options RF_INCLUDE_RAID5_RS=1 445 1.129 oster # options RF_INCLUDE_PARITYLOGGING=1 446 1.129 oster # options RF_INCLUDE_CHAINDECLUSTER=1 447 1.129 oster # options RF_INCLUDE_INTERDECLUSTER=1 448 1.129 oster # options RF_INCLUDE_PARITY_DECLUSTERING=1 449 1.129 oster # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 450 1.129 oster 451 1.55 pk 452 1.55 pk ## Memory disk device, used on boot floppies with compressed 453 1.55 pk ## kernel-plus-root-disk images. 454 1.55 pk 455 1.55 pk #pseudo-device md 1 456 1.55 pk 457 1.55 pk 458 1.55 pk #### Network interfaces 459 1.55 pk 460 1.55 pk ## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue 461 1.55 pk ## Three flavors of additional SBus ethernets are available. One attaches 462 1.55 pk ## directly like the sun4c on-board, one uses the ledma device like the 463 1.55 pk ## sun4m on-board, and one uses the lebuffer device. 464 1.55 pk 465 1.56 pk le0 at obio0 addr 0xf9000000 level 6 # sun4/300 466 1.56 pk le0 at sbus0 slot ? offset ? # sun4c on-board 467 1.56 pk ledma0 at sbus0 slot ? offset ? # sun4m on-board 468 1.56 pk le0 at ledma0 # sun4m on-board 469 1.56 pk le* at sbus? slot ? offset ? # SBus 470 1.56 pk ledma* at sbus? slot ? offset ? # SBus 471 1.56 pk le* at ledma? # SBus 472 1.56 pk lebuffer0 at sbus? slot ? offset ? # SBus 473 1.56 pk le0 at lebuffer? # SBus 474 1.55 pk lebuffer* at sbus? slot ? offset ? # SBus 475 1.56 pk le* at lebuffer? # SBus 476 1.55 pk 477 1.55 pk 478 1.55 pk ## sun4/100 and sun4/200 Ethernet - an Intel 82586 on-board 479 1.55 pk ## or on a Multibus/VME card. 480 1.55 pk ie0 at obio0 addr 0xf6000000 level 6 # sun4/200 on-board 481 1.55 pk ie0 at obio0 addr 0x06000000 level 6 # sun4/100 on-board 482 1.108 pk ## VME: the first [addr,len] pair specifies the device registers; 483 1.108 pk ## the second pair specifies the on-board memory buffer 484 1.108 pk ie1 at vme0 addr 0xe88000,0xe00000 len -1,0x40000 irq 3 vect 0x75 485 1.108 pk ie2 at vme0 addr 0x31ff02,0x300000 len -1,0x40000 irq 3 vect 0x76 486 1.108 pk ie3 at vme0 addr 0x35ff02,0x300000 len -1,0x40000 irq 3 vect 0x77 487 1.108 pk ie4 at vme0 addr 0x2dff02,0x200000 len -1,0x40000 irq 3 vect 0x7c 488 1.55 pk 489 1.90 hubertf ## Quad Ethernet Controller with BigMac (be, 10/100MBd) and Mace Ethernet 490 1.90 hubertf ## (qe, 10MBd) attached. 491 1.90 hubertf qec* at sbus? slot ? offset ? # Quad Ethernet Controller 492 1.90 hubertf be* at qec? # BigMac Ethernet (10/100MBd) 493 1.90 hubertf qe* at qec? # Mace Ethernet (10MBd) 494 1.85 pk 495 1.98 pk ## Happy Meal Ethernet 496 1.98 pk hme* at sbus? slot ? offset ? 497 1.70 pk 498 1.70 pk # midway ATM 499 1.70 pk en0 at sbus? slot ? offset ? 500 1.75 pk 501 1.75 pk # PCMCIA ethernet devices 502 1.80 abs #ep* at pcmcia? 503 1.80 abs #mbe* at pcmcia? 504 1.80 abs #ne* at pcmcia? 505 1.80 abs #sm* at pcmcia? 506 1.75 pk 507 1.75 pk # MII/PHY support 508 1.81 pk exphy* at mii? phy ? # 3Com internal PHYs 509 1.131 wiz icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x 510 1.81 pk inphy* at mii? phy ? # Intel 82555 PHYs 511 1.81 pk lxtphy* at mii? phy ? # Level One LXT-970 PHYs 512 1.81 pk nsphy* at mii? phy ? # NS83840 PHYs 513 1.81 pk qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 514 1.81 pk sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs 515 1.81 pk tlphy* at mii? phy ? # ThunderLAN PHYs 516 1.81 pk ukphy* at mii? phy ? # generic unknown PHYs 517 1.70 pk 518 1.55 pk ## Loopback network interface; required 519 1.55 pk pseudo-device loop 520 1.55 pk 521 1.55 pk ## SLIP and CSLIP interfaces, for IP over a serial line. 522 1.55 pk pseudo-device sl 2 523 1.55 pk 524 1.55 pk ## PPP, the successor to SLIP. See pppd(8). 525 1.55 pk pseudo-device ppp 2 526 1.128 martin 527 1.128 martin ## PPP over Ethernet (RFC 2516) 528 1.128 martin pseudo-device pppoe 529 1.55 pk 530 1.55 pk ## Starmode Radio IP, a special hardware network device. 531 1.55 pk #pseudo-device strip 1 532 1.55 pk 533 1.55 pk ## Network "tunnel" device, allowing protocol stacks to run in the userland. 534 1.55 pk ## This is used by the third-party user-mode "ppp" program, and others. 535 1.55 pk pseudo-device tun 4 536 1.73 hwr 537 1.73 hwr ## Generic L3 over IP tunnel 538 1.73 hwr #pseudo-device gre 2 # generic L3 over IP tunnel 539 1.55 pk 540 1.55 pk ## Berkeley Packet Filter, required to run RARPD. A generic C-language 541 1.55 pk ## interface that allows selective examining of incoming packets. 542 1.55 pk pseudo-device bpfilter 8 543 1.55 pk 544 1.55 pk ## IP Filter, used in firewall and NAT applications. See ipnat(8) for 545 1.55 pk ## one example of the use of the IP Filter. 546 1.55 pk pseudo-device ipfilter 547 1.55 pk 548 1.94 itojun ## for IPv6 549 1.94 itojun pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 550 1.94 itojun #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 551 1.104 itojun #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 552 1.120 hubertf 553 1.120 hubertf ## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 554 1.120 hubertf pseudo-device vlan 555 1.122 atatat 556 1.122 atatat ## Simple inter-network traffic bridging 557 1.126 atatat pseudo-device bridge 558 1.145 perseant #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 559 1.55 pk 560 1.55 pk #### Audio and video devices 561 1.55 pk 562 1.55 pk ## /dev/audio support (`audioamd' plus `audio') 563 1.55 pk ## 564 1.55 pk audioamd0 at mainbus0 # sun4c 565 1.142 jdc audioamd0 at obio0 # sun4m 566 1.55 pk audioamd0 at sbus0 slot ? offset ? # sun4m 567 1.55 pk audio* at audioamd0 568 1.70 pk 569 1.70 pk audiocs0 at sbus0 slot ? offset ? # SUNW,CS4231 570 1.70 pk audio* at audiocs0 571 1.55 pk 572 1.55 pk 573 1.55 pk ## Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m 574 1.55 pk ## systems. If your sun4 system has a cgfour installed in the P4 slot, 575 1.55 pk ## the P4 entries for "bwtwo" will attach to the overlay plane of the 576 1.55 pk ## "cgfour". 577 1.1 deraadt 578 1.55 pk bwtwo0 at sbus0 slot ? offset ? # sun4c and sun4m 579 1.55 pk bwtwo* at sbus? slot ? offset ? # 580 1.55 pk bwtwo0 at obio0 addr 0xfd000000 level 4 # sun4/200 581 1.55 pk bwtwo0 at obio0 addr 0xfb300000 level 4 # sun4/300 in P4 slot 582 1.55 pk bwtwo0 at obio0 addr 0x0b300000 level 4 # sun4/100 in P4 slot 583 1.21 thorpej 584 1.55 pk ## Sun "cgtwo" VME color framebuffer 585 1.88 drochner cgtwo0 at vme0 addr 0x400000 irq ? vect 0xa8 586 1.21 thorpej 587 1.55 pk ## Sun "cgthree" Sbus color framebuffer 588 1.55 pk cgthree0 at sbus? slot ? offset ? 589 1.55 pk cgthree* at sbus? slot ? offset ? 590 1.55 pk #cgthree0 at obio? slot ? offset ? # sun4m 591 1.55 pk 592 1.55 pk ## Sun "cgfour" color framebuffer with overlay plane. See above comment 593 1.55 pk ## regarding overlay plane. 594 1.55 pk cgfour0 at obio0 addr 0xfb300000 level 4 # sun4/300 P4 595 1.55 pk cgfour0 at obio0 addr 0x0b300000 level 4 # sun4/100 P4 596 1.55 pk 597 1.55 pk ## Sun "cgsix" accelerated color framebuffer. 598 1.55 pk cgsix0 at sbus? slot ? offset ? 599 1.55 pk cgsix* at sbus? slot ? offset ? 600 1.55 pk cgsix0 at obio0 addr 0xfb000000 level 4 # sun4/300 P4 601 1.55 pk cgsix0 at obio0 addr 0x0b000000 level 4 # sun4/100 P4 602 1.55 pk 603 1.55 pk ## Sun "cgeight" 24-bit framebuffer 604 1.55 pk cgeight0 at obio0 addr 0xfb300000 level 4 # sun4/300 P4 605 1.55 pk cgeight0 at obio0 addr 0x0b300000 level 4 # sun4/100 P4 606 1.55 pk 607 1.55 pk ## Sun "tcx" accelerated color framebuffer. 608 1.55 pk tcx0 at sbus? slot ? offset ? 609 1.55 pk tcx* at sbus? slot ? offset ? 610 1.33 abrown 611 1.33 abrown # Sun "cgfourteen" accelerated 24-bit framebuffer. 612 1.33 abrown cgfourteen0 at obio0 # sun4m 613 1.1 deraadt 614 1.106 matt # P9100-based display on Tadpole SPARCbook 3. 615 1.106 matt pnozz0 at sbus? slot ? offset ? 616 1.136 ad 617 1.136 ad # Sun ZX/Leo 24-bit framebuffer 618 1.136 ad zx* at sbus? slot ? offset ? 619 1.1 deraadt 620 1.55 pk #### Other device configuration 621 1.106 matt 622 1.106 matt # Tadpole microcontroller 623 1.106 matt tctrl0 at obio0 624 1.24 thorpej 625 1.55 pk ## Pseudo ttys, required for network logins and programs like screen. 626 1.24 thorpej 627 1.117 jdolecek pseudo-device pty # pseudo-terminals 628 1.55 pk 629 1.55 pk ## Random device, used to implement /dev/random (a source of random noise), 630 1.55 pk ## and generate randomness for some kernel formulae. 631 1.55 pk 632 1.84 mrg pseudo-device rnd 633 1.91 phil 634 1.91 phil # a pseudo device needed for Coda # also needs CODA (above) 635 1.91 phil pseudo-device vcoda 4 # coda minicache <-> venus comm. 636 1.135 lukem 637 1.135 lukem pseudo-device clockctl # user control of clock subsystem 638
Indexes created Wed Oct 01 19:09:53 GMT 2025