GENERIC revision 1.234.2.5
1 1.234.2.3 tls # $NetBSD: GENERIC,v 1.234.2.5 2017/12/03 11:36:43 jdolecek Exp $ 2 1.127 gmcgarry # 3 1.127 gmcgarry # GENERIC machine description file 4 1.127 gmcgarry # 5 1.127 gmcgarry # This machine description file is used to generate the default NetBSD 6 1.127 gmcgarry # kernel. The generic kernel does not include all options, subsystems 7 1.127 gmcgarry # and device drivers, but should be useful for most applications. 8 1.127 gmcgarry # 9 1.127 gmcgarry # The machine description file can be customised for your specific 10 1.127 gmcgarry # machine to reduce the kernel size and improve its performance. 11 1.127 gmcgarry # 12 1.127 gmcgarry # For further information on compiling NetBSD kernels, see the config(8) 13 1.127 gmcgarry # man page. 14 1.127 gmcgarry # 15 1.127 gmcgarry # For further information on hardware support for this architecture, see 16 1.127 gmcgarry # the intro(4) man page. For further information about kernel options 17 1.127 gmcgarry # for this architecture, see the options(4) man page. For an explanation 18 1.127 gmcgarry # of each device driver in this file see the section 4 man page for the 19 1.127 gmcgarry # device. 20 1.1 deraadt 21 1.127 gmcgarry include "arch/sparc/conf/std.sparc" 22 1.96 hubertf 23 1.133 atatat options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 1.133 atatat 25 1.234.2.3 tls #ident "GENERIC-$Revision: 1.234.2.5 $" 26 1.45 pk 27 1.45 pk maxusers 32 28 1.32 mrg 29 1.55 pk ## System kernel configuration. See options(4) for more detail. 30 1.55 pk 31 1.55 pk 32 1.24 thorpej # Options for variants of the Sun SPARC architecure. 33 1.55 pk # We currently support three architecture types; at least one is required. 34 1.43 lukem options SUN4 # sun4/100, sun4/200, sun4/300 35 1.43 lukem options SUN4C # sun4c - SS1, 1+, 2, ELC, SLC, IPC, IPX, etc. 36 1.43 lukem options SUN4M # sun4m - SS10, SS20, Classic, etc. 37 1.150 chs options SUN4D # sun4d - SS1000, SC2000 38 1.24 thorpej 39 1.109 pk options SUN4_MMU3L # sun4/400 3-level MMU 40 1.1 deraadt 41 1.55 pk ## System options specific to the sparc machine type 42 1.55 pk 43 1.55 pk # Blink the power LED on some machines to indicate the system load. 44 1.55 pk #options BLINK 45 1.55 pk 46 1.208 macallan # wscons stuff 47 1.233 macallan #options WSEMUL_SUN 48 1.233 macallan options WSEMUL_VT100 49 1.211 jdc options WSDISPLAY_COMPAT_RAWKBD 50 1.211 jdc options WSDISPLAY_CUSTOM_OUTPUT 51 1.211 jdc options WS_DEFAULT_FG=WSCOL_BLACK 52 1.211 jdc options WS_DEFAULT_BG=WSCOL_LIGHT_WHITE 53 1.211 jdc options WS_KERNEL_FG=WSCOL_GREEN 54 1.211 jdc options WS_KERNEL_BG=WSCOL_LIGHT_WHITE 55 1.211 jdc options WSDISPLAY_COMPAT_PCVT 56 1.208 macallan options WSDISPLAY_COMPAT_SYSCONS 57 1.234 abs options WSDISPLAY_COMPAT_USL # wsconscfg VT handling 58 1.208 macallan 59 1.211 jdc options WSDISPLAY_SCROLLSUPPORT 60 1.208 macallan 61 1.79 ad options FONT_GALLANT12x22 # the console font 62 1.230 macallan options FONT_BOLD8x16 # a somewhat smaller font 63 1.55 pk 64 1.55 pk #### System options that are the same for all ports 65 1.55 pk 66 1.55 pk ## Root device configuration: change the ?'s if you are going to use a 67 1.55 pk ## nonstandard root partition (other than where the kernel is booted from) 68 1.55 pk ## and/or nonstandard root type (not ffs or nfs). Normally this can be 69 1.55 pk ## automagically determined at boot time. 70 1.55 pk 71 1.55 pk config netbsd root on ? type ? 72 1.55 pk 73 1.55 pk ## System call tracing (see ktrace(1)). 74 1.55 pk options KTRACE 75 1.55 pk 76 1.55 pk ## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 77 1.43 lukem options SYSVMSG # System V message queues 78 1.43 lukem options SYSVSEM # System V semaphores 79 1.43 lukem options SYSVSHM # System V shared memory 80 1.24 thorpej 81 1.227 mrg options MODULAR # new style module(7) framework 82 1.234.2.5 jdolecek options MODULAR_DEFAULT_AUTOLOAD 83 1.130 jdolecek 84 1.137 lukem options USERCONF # userconf(4) support 85 1.160 uwe #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 86 1.161 atatat options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 87 1.143 junyoung 88 1.144 wiz # Enable experimental buffer queue strategy for better responsiveness under 89 1.143 junyoung # high disk I/O load. Use it with caution - it's not proven to be stable yet. 90 1.170 tsutsui #options BUFQ_READPRIO 91 1.170 tsutsui #options BUFQ_PRIOCSCAN 92 1.55 pk 93 1.134 lukem ## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 94 1.59 pk options NFS_BOOT_BOOTPARAM 95 1.59 pk #options NFS_BOOT_BOOTP 96 1.134 lukem options NFS_BOOT_DHCP 97 1.55 pk 98 1.55 pk #### Debugging options 99 1.55 pk 100 1.55 pk ## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 101 1.55 pk ## serial console break or keyboard reset, where the PROM would normally 102 1.55 pk ## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 103 1.214 tsutsui options DDB # kernel dynamic debugger 104 1.214 tsutsui options DDB_HISTORY_SIZE=100 # enable history editing in DDB 105 1.234.2.4 tls #options DDB_ONPANIC=1 # see also sysctl(7): `ddb.onpanic' 106 1.55 pk 107 1.55 pk ## You may also use gdb, on another computer connected to this machine over 108 1.124 lukem ## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 109 1.124 lukem ## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 110 1.124 lukem ## the minor device number encodes the PROM enumeration of the serial ports, 111 1.124 lukem ## i.e.: 112 1.124 lukem ## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 113 1.124 lukem ## (Note: ttyc and ttyd are available only on some sun4 models) 114 1.124 lukem #options KGDB # support for kernel gdb 115 1.124 lukem #options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 116 1.124 lukem #options KGDB_DEVRATE=38400 # baud rate 117 1.24 thorpej 118 1.55 pk 119 1.55 pk ## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 120 1.55 pk ## such that gdb(1) can be used on a kernel coredump. 121 1.55 pk 122 1.125 lukem #makeoptions DEBUG="-g" 123 1.55 pk 124 1.55 pk 125 1.55 pk ## Adds code to the kernel that does internal consistency checks, and will 126 1.55 pk ## cause the kernel to panic if corruption of internal data structures 127 1.55 pk ## is detected. 128 1.55 pk #options DIAGNOSTIC # extra kernel sanity checking 129 1.55 pk 130 1.55 pk ## Enable (possibly expensive) debugging code that may also display messages 131 1.55 pk ## on the system console 132 1.55 pk #options DEBUG 133 1.226 jdc #options LOCKDEBUG 134 1.226 jdc #options SYSCALL_DEBUG 135 1.55 pk 136 1.55 pk ## Make SCSI error messages more verbose when explaining their meanings. 137 1.55 pk options SCSIVERBOSE 138 1.105 augustss 139 1.105 augustss options MIIVERBOSE # verbose PHY autoconfig messages 140 1.55 pk 141 1.55 pk ## `INSECURE' turns off the kernel security level (securelevel = 0 always). 142 1.55 pk ## This allows writing to /dev/mem, loading kernel modules while multi-user, 143 1.55 pk ## and other insecurities good only for development work. Do not use this 144 1.55 pk ## option on a production machine. 145 1.55 pk #options INSECURE 146 1.55 pk 147 1.55 pk ## `FDSCRIPTS' allows non-readable but executable scripts by providing a 148 1.55 pk ## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 149 1.55 pk ## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 150 1.55 pk ## opaque file mechanism. Perl calls this "secure setuid scripts." 151 1.55 pk 152 1.55 pk #options FDSCRIPTS 153 1.55 pk #options SETUIDSCRIPTS 154 1.55 pk 155 1.55 pk ## Options for compatibility with previous releases foreign system binaries. 156 1.55 pk ## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 157 1.55 pk ## additional user-level utilities or system configuration files. See 158 1.55 pk ## compat_sunos(8) and compat_svr4(8). 159 1.55 pk 160 1.234.2.5 jdolecek include "conf/compat_netbsd10.config" 161 1.43 lukem options COMPAT_SUNOS # SunOS 4.x binary compatibility 162 1.234.2.5 jdolecek #options COMPAT_SVR4 # SunOS 5.x binary compatibility 163 1.1 deraadt 164 1.55 pk ## File systems. You probably need at least one of FFS or NFS. 165 1.43 lukem file-system FFS # Berkeley Fast Filesystem 166 1.43 lukem file-system NFS # Sun NFS-compatible filesystem client 167 1.43 lukem file-system KERNFS # kernel data-structure filesystem 168 1.43 lukem file-system NULLFS # NULL layered filesystem 169 1.95 wrstuden file-system OVERLAY # overlay file system 170 1.43 lukem file-system MFS # memory-based filesystem 171 1.43 lukem file-system FDESC # user file descriptor filesystem 172 1.43 lukem file-system UMAPFS # uid/gid remapping filesystem 173 1.43 lukem file-system LFS # Log-based filesystem (still experimental) 174 1.218 pooka file-system PUFFS # Userspace file systems (e.g. ntfs-3g & sshfs) 175 1.43 lukem file-system PROCFS # /proc 176 1.43 lukem file-system CD9660 # ISO 9660 + Rock Ridge file system 177 1.43 lukem file-system UNION # union file system 178 1.43 lukem file-system MSDOSFS # MS-DOS FAT filesystem(s). 179 1.91 phil file-system CODA # Coda File System; also needs vcoda (below) 180 1.179 christos file-system PTYFS # /dev/pts/N support 181 1.223 chs file-system TMPFS # Efficient memory file-system 182 1.183 reinoud #file-system UDF # experimental - OSTA UDF CD/DVD file-system 183 1.43 lukem 184 1.55 pk ## File system options. 185 1.43 lukem options NFSSERVER # Sun NFS-compatible filesystem server 186 1.43 lukem options QUOTA # FFS quotas 187 1.63 pk #options FFS_EI # FFS Endian Independent support 188 1.229 dholland options WAPBL # File system journaling support 189 1.211 jdc #options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 190 1.181 tsutsui #options FFS_NO_SNAPSHOT # No FFS snapshot support 191 1.234.2.5 jdolecek options UFS_EXTATTR # Extended attribute support for UFS1 192 1.94 itojun 193 1.55 pk ## Network protocol support. In most environments, INET is required. 194 1.57 pk options INET # IP (Internet Protocol) v4 195 1.94 itojun options INET6 # IPV6 196 1.94 itojun #options IPSEC # IP security 197 1.94 itojun #options IPSEC_DEBUG # debug for IP security 198 1.57 pk #options GATEWAY # packet forwarding ("router switch") 199 1.57 pk #options MROUTING # packet forwarding of multicast packets 200 1.163 manu #options PIM # Protocol Independent Multicast 201 1.57 pk #options DIRECTED_BROADCAST # allow broadcasts through routers 202 1.75 pk #options NETATALK # AppleTalk (over Ethernet) protocol 203 1.67 pk options NTP # Network Time Protocol in-kernel support 204 1.57 pk #options PPS_SYNC # Add serial line synchronization for NTP 205 1.86 christos options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 206 1.192 christos options IPFILTER_LOOKUP # ippool(8) support 207 1.224 mrg options IPFILTER_COMPAT # Compat for IP-Filter 208 1.139 martti #options IPFILTER_DEFAULT_BLOCK # block all packets by default 209 1.86 christos options PPP_BSDCOMP # Add BSD compression to ppp device 210 1.86 christos options PPP_DEFLATE # Add deflate (libz) compression to ppp device 211 1.86 christos options PPP_FILTER # Add active filters for ppp (via bpf) 212 1.1 deraadt 213 1.156 abs #options ALTQ # Manipulate network interfaces' output queues 214 1.156 abs #options ALTQ_BLUE # Stochastic Fair Blue 215 1.156 abs #options ALTQ_CBQ # Class-Based Queueing 216 1.156 abs #options ALTQ_CDNR # Diffserv Traffic Conditioner 217 1.156 abs #options ALTQ_FIFOQ # First-In First-Out Queue 218 1.156 abs #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 219 1.156 abs #options ALTQ_HFSC # Hierarchical Fair Service Curve 220 1.156 abs #options ALTQ_LOCALQ # Local queueing discipline 221 1.156 abs #options ALTQ_PRIQ # Priority Queueing 222 1.156 abs #options ALTQ_RED # Random Early Detection 223 1.156 abs #options ALTQ_RIO # RED with IN/OUT 224 1.156 abs #options ALTQ_WFQ # Weighted Fair Queueing 225 1.156 abs 226 1.1 deraadt 227 1.55 pk 228 1.57 pk #### Main bus and CPU .. all systems. 229 1.1 deraadt mainbus0 at root 230 1.1 deraadt cpu0 at mainbus0 231 1.150 chs cpuunit0 at mainbus0 # sun4d 232 1.150 chs cpuunit* at mainbus0 # sun4d 233 1.150 chs cpu0 at cpuunit0 # sun4d 234 1.1 deraadt 235 1.234.2.2 tls #### SX rendering engine found in SS20 and SS10SX 236 1.234.2.2 tls sx0 at mainbus0 237 1.234.2.2 tls 238 1.55 pk #### Bus types found on SPARC systems. 239 1.55 pk 240 1.24 thorpej sbus0 at mainbus0 # sun4c 241 1.24 thorpej obio0 at mainbus0 # sun4 and sun4m 242 1.150 chs sparcvme0 at mainbus0 # sun4 243 1.22 pk iommu0 at mainbus0 # sun4m 244 1.22 pk sbus0 at iommu0 # sun4m 245 1.150 chs sparcvme0 at iommu0 # sun4m 246 1.150 chs vme0 at sparcvme0 # MI VME attachment 247 1.150 chs bootbus0 at cpuunit0 # sun4d 248 1.150 chs bootbus* at cpuunit? # sun4d 249 1.64 pk 250 1.64 pk ## SBus expander box 251 1.64 pk xbox* at sbus? slot ? offset ? 252 1.64 pk sbus* at xbox? 253 1.72 pk 254 1.72 pk ## SBus to PCMCIA bridge 255 1.159 pk nell* at sbus? slot ? offset ? # PCMCIA bridge 256 1.159 pk pcmcia* at nell? 257 1.173 macallan tslot* at sbus? slot ? offset ? # PCMCIA bridge (tadpole 3gx) 258 1.173 macallan pcmcia* at tslot? 259 1.1 deraadt 260 1.55 pk #### Standard system devices -- all required for a given architecture 261 1.24 thorpej 262 1.55 pk ## Auxiliary system registers on sun4c and sun4m 263 1.24 thorpej auxreg0 at mainbus0 # sun4c 264 1.22 pk auxreg0 at obio0 # sun4m 265 1.106 matt auxiotwo0 at obio0 # only on Tadpole SPARCbook. 266 1.27 abrown 267 1.55 pk ## Power status and control register on Sun4m systems 268 1.27 abrown power0 at obio0 269 1.24 thorpej 270 1.150 chs ## Mostek clock found on 4/300, sun4c, sun4m and sun4d systems. 271 1.55 pk ## The Mostek clock NVRAM is the "eeprom" on sun4/300 systems. 272 1.24 thorpej clock0 at mainbus0 # sun4c 273 1.22 pk clock0 at obio0 # sun4m 274 1.24 thorpej clock0 at obio0 addr 0xf2000000 # sun4/300 275 1.150 chs clock0 at bootbus0 # sun4d 276 1.24 thorpej 277 1.55 pk ## Intersil clock found on 4/100 and 4/200 systems. 278 1.24 thorpej oclock0 at obio0 addr 0xf3000000 # sun4/200 279 1.24 thorpej oclock0 at obio0 addr 0x03000000 # sun4/100 280 1.24 thorpej 281 1.55 pk ## Memory error registers. 282 1.24 thorpej memreg0 at mainbus0 # sun4c 283 1.22 pk memreg0 at obio0 # sun4m 284 1.24 thorpej memreg0 at obio0 addr 0xf4000000 # sun4/200 and sun4/300 285 1.24 thorpej memreg0 at obio0 addr 0x04000000 # sun4/100 286 1.74 pk 287 1.74 pk ## ECC memory control 288 1.74 pk eccmemctl0 at mainbus0 # sun4m 289 1.24 thorpej 290 1.55 pk ## Timer chip found on 4/300, sun4c, and sun4m systems. 291 1.24 thorpej timer0 at mainbus0 # sun4c 292 1.22 pk timer0 at obio0 # sun4m 293 1.24 thorpej timer0 at obio0 addr 0xef000000 # sun4/300 294 1.24 thorpej 295 1.55 pk ## EEPROM found on 4/100 and 4/200 systems. Note that the 4/300 296 1.55 pk ## doesn't use this driver; the `EEPROM' is in the NVRAM on the 297 1.55 pk ## Mostek clock chip on 4/300 systems. 298 1.24 thorpej eeprom0 at obio0 addr 0xf2000000 # sun4/200 299 1.24 thorpej eeprom0 at obio0 addr 0x02000000 # sun4/100 300 1.24 thorpej 301 1.55 pk 302 1.55 pk #### Serial port configuration 303 1.55 pk 304 1.55 pk ## Zilog 8530 serial chips. Each has two-channels. 305 1.55 pk ## zs0 is ttya and ttyb. zs1 is the keyboard and mouse. 306 1.24 thorpej zs0 at mainbus0 # sun4c 307 1.24 thorpej zs0 at obio0 # sun4m 308 1.100 pk zs0 at obio0 addr 0xf1000000 level 12 # sun4/200 and sun4/300 309 1.100 pk zs0 at obio0 addr 0x01000000 level 12 # sun4/100 310 1.150 chs zs0 at bootbus0 # sun4d 311 1.212 tsutsui zstty0 at zs0 channel 0 # ttya 312 1.212 tsutsui zstty1 at zs0 channel 1 # ttyb 313 1.50 gwr 314 1.24 thorpej zs1 at mainbus0 # sun4c 315 1.24 thorpej zs1 at obio0 # sun4m 316 1.100 pk zs1 at obio0 addr 0xf0000000 level 12 # sun4/200 and sun4/300 317 1.100 pk zs1 at obio0 addr 0x00000000 level 12 # sun4/100 318 1.150 chs zs1 at bootbus0 # sun4d 319 1.208 macallan 320 1.208 macallan # old kbd and mouse attachments 321 1.208 macallan #kbd0 at zs1 channel 0 # keyboard 322 1.208 macallan #ms0 at zs1 channel 1 # mouse 323 1.208 macallan zstty* at zs? 324 1.208 macallan 325 1.208 macallan # these are for wscons 326 1.208 macallan kbd0 at zstty? 327 1.208 macallan ms0 at zstty? 328 1.208 macallan wskbd* at wskbddev? 329 1.208 macallan wsmouse* at wsmousedev? 330 1.100 pk 331 1.100 pk zs2 at obio0 addr 0xe0000000 level 12 # sun4/300 332 1.100 pk zstty2 at zs2 channel 0 # ttyc 333 1.100 pk zstty3 at zs2 channel 1 # ttyd 334 1.113 matt 335 1.150 chs zs* at bootbus? # sun4d 336 1.150 chs zstty* at zs? 337 1.150 chs 338 1.125 lukem ## NS16x50 serial chips and clones. Present on the 339 1.113 matt ## Sun JavaStation-1 and Tadpole SPARCbook 3 340 1.113 matt com* at obio0 # sun4m 341 1.66 pk 342 1.97 cjs # Parallel port. 343 1.97 cjs bpp* at sbus? slot? offset ? 344 1.66 pk 345 1.66 pk ## Magma Serial/Parallel driver 346 1.66 pk magma* at sbus? slot ? offset ? 347 1.66 pk mtty* at magma? 348 1.66 pk mbpp* at magma? 349 1.66 pk 350 1.162 mrg ## SUNW,spif Serial/Parallel driver 351 1.162 mrg spif* at sbus? slot ? offset ? 352 1.162 mrg stty* at spif? 353 1.162 mrg sbpp* at spif? 354 1.162 mrg 355 1.75 pk ## PCMCIA serial interfaces 356 1.80 abs #com* at pcmcia? 357 1.80 abs #pcmcom* at pcmcia? 358 1.80 abs #com* at pcmcom? 359 1.24 thorpej 360 1.55 pk #### Disk controllers and disks 361 1.55 pk 362 1.26 pk # 363 1.26 pk 364 1.55 pk ## The following flags may be set for the NCR53c94 based esp driver: 365 1.55 pk ## bits 0-7: disable disconnect/reselect for the corresponding target 366 1.55 pk ## bits 8-15: disable synchronous negotiation for target [bit-8] 367 1.55 pk 368 1.55 pk ## sun4/300, sun4c, sun4m on-board SCSI, and FSBE/S SBus SCSI cards. 369 1.55 pk ## Both `dma' and `esp' are needed in all cases. 370 1.55 pk ## Two kinds of additional SBus SCSI interfaces are available. One uses 371 1.55 pk ## "esp at sbus" like the sun4c on-board; the other uses "esp at dma". 372 1.55 pk 373 1.55 pk ## sun4/300 SCSI - an NCR53c94 or equivalent behind 374 1.55 pk ## an LSI Logic DMA controller 375 1.55 pk 376 1.24 thorpej dma0 at obio0 addr 0xfa001000 level 4 # sun4/300 377 1.55 pk esp0 at obio0 addr 0xfa000000 level 4 flags 0x0000 # sun4/300 378 1.1 deraadt 379 1.55 pk dma0 at sbus0 slot ? offset ? # sun4c/sun4m 380 1.51 pk esp0 at sbus0 slot ? offset ? flags 0x0000 # sun4c 381 1.51 pk esp0 at dma0 flags 0x0000 # sun4m 382 1.24 thorpej 383 1.151 fair # FSBE/S SCSI & SunSwift Sbus FAS366 384 1.55 pk dma* at sbus? slot ? offset ? # SBus 385 1.151 fair esp* at sbus? slot ? offset ? flags 0x0000 # SBus 386 1.55 pk esp* at dma? flags 0x0000 # SBus 387 1.24 thorpej 388 1.55 pk scsibus* at esp? 389 1.55 pk 390 1.55 pk ## Qlogic ISP SBus SCSI Card 391 1.42 cgd isp* at sbus? slot ? offset ? 392 1.55 pk scsibus* at isp? 393 1.42 cgd 394 1.55 pk ## NCR5380-based "Sun SCSI 3" VME SCSI controller. 395 1.55 pk ## This driver has several flags which may be enabled by OR'ing 396 1.55 pk ## the values and using the "flags" directive. 397 1.55 pk ## Valid flags are: 398 1.55 pk ## 399 1.55 pk ## 0x01 Use DMA (may be polled) 400 1.55 pk ## 0x02 Use DMA completion interrupts 401 1.55 pk ## 0x04 Allow disconnect/reselect 402 1.55 pk ## 403 1.55 pk ## E.g. the following would enable DMA, interrupts, and reselect: 404 1.88 drochner ## si0 at vme0 addr 0x200000 irq 3 vect 0x40 flags 0x07 405 1.55 pk ## 406 1.55 pk ## By default, DMA is enabled in the driver. 407 1.25 pk 408 1.88 drochner si0 at vme0 addr 0x200000 irq 2 vect 0x40 409 1.55 pk scsibus* at si? 410 1.24 thorpej 411 1.55 pk ## NCR5380-based "SCSI Weird" on-board SCSI interface found 412 1.55 pk ## on sun4/100 systems. The flags are the same as the "si" 413 1.55 pk ## controller. Note, while DMA is enabled by default, only 414 1.55 pk ## polled DMA works at this time, and reselects do not work 415 1.55 pk ## on this particular controller. 416 1.1 deraadt 417 1.55 pk sw0 at obio0 addr 0x0a000000 level 3 418 1.55 pk scsibus* at sw? 419 1.24 thorpej 420 1.75 pk ## PCMCIA SCSI controllers 421 1.80 abs #aic* at pcmcia? 422 1.189 hubertf #spc* at pcmcia? 423 1.80 abs #scsibus* at aic? 424 1.189 hubertf #scsibus* at spc? 425 1.75 pk 426 1.75 pk 427 1.55 pk ## These entries find devices on all SCSI busses and assign 428 1.55 pk ## unit numbers dynamically. 429 1.55 pk sd* at scsibus? target ? lun ? # SCSI disks 430 1.55 pk st* at scsibus? target ? lun ? # SCSI tapes 431 1.55 pk cd* at scsibus? target ? lun ? # SCSI CD-ROMs 432 1.55 pk ch* at scsibus? target ? lun ? # SCSI changer devices 433 1.55 pk ss* at scsibus? target ? lun ? # SCSI scanners 434 1.118 mjacob ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE 435 1.55 pk uk* at scsibus? target ? lun ? # unknown SCSI 436 1.23 pk 437 1.9 pk 438 1.55 pk ## Xylogics 753 or 7053 VME SMD disk controllers and disks, found 439 1.55 pk ## on sun4 systems. 440 1.88 drochner xdc0 at vme0 addr 0xee80 irq 3 vect 0x44 441 1.88 drochner xdc1 at vme0 addr 0xee90 irq 3 vect 0x45 442 1.88 drochner xdc2 at vme0 addr 0xeea0 irq 3 vect 0x46 443 1.88 drochner xdc3 at vme0 addr 0xeeb0 irq 3 vect 0x47 444 1.9 pk xd* at xdc? drive ? 445 1.16 chuck 446 1.55 pk ## Xylogics 451 or 451 VME SMD disk controllers and disks, found 447 1.55 pk ## on sun4 systems. 448 1.88 drochner xyc0 at vme0 addr 0xee40 irq 3 vect 0x48 449 1.88 drochner xyc1 at vme0 addr 0xee48 irq 3 vect 0x49 450 1.16 chuck xy* at xyc? drive ? 451 1.10 pk 452 1.24 thorpej 453 1.55 pk ## Floppy controller and drive found on SPARCstations. 454 1.55 pk 455 1.55 pk fdc0 at mainbus0 # sun4c controller 456 1.55 pk fdc0 at obio0 # sun4m controller 457 1.55 pk fd* at fdc0 # the drive itself 458 1.55 pk 459 1.75 pk ## PCMCIA IDE controllers 460 1.80 abs #wdc* at pcmcia? 461 1.149 martin #atabus* at ata? 462 1.149 martin #wd* at atabus? drive ? flags 0x0000 463 1.149 martin 464 1.55 pk ## A disk-like interface to files. Can be used to create floppy, CD, 465 1.55 pk ## miniroot images, etc. 466 1.55 pk 467 1.185 cube pseudo-device vnd 468 1.175 hubertf #options VND_COMPRESSION # compressed vnd(4) 469 1.55 pk 470 1.55 pk ## Concatenated and striped disks; with this, you can create a software-based 471 1.55 pk ## disk array similar to a "RAID 0" setup. See ccd(4). 472 1.55 pk 473 1.234.2.3 tls pseudo-device ccd 474 1.141 elric 475 1.141 elric ## Cryptographic disk devices; See cgd(4) 476 1.141 elric 477 1.234.2.3 tls #pseudo-device cgd 478 1.71 oster 479 1.71 oster ## RAIDframe disk driver: software RAID driver. See raid(4). 480 1.71 oster 481 1.234.2.3 tls pseudo-device raid 482 1.129 oster options RAID_AUTOCONFIG # auto-configuration of RAID components 483 1.129 oster # Options to enable various other RAIDframe RAID types. 484 1.160 uwe # options RF_INCLUDE_EVENODD=1 485 1.160 uwe # options RF_INCLUDE_RAID5_RS=1 486 1.160 uwe # options RF_INCLUDE_PARITYLOGGING=1 487 1.160 uwe # options RF_INCLUDE_CHAINDECLUSTER=1 488 1.160 uwe # options RF_INCLUDE_INTERDECLUSTER=1 489 1.129 oster # options RF_INCLUDE_PARITY_DECLUSTERING=1 490 1.160 uwe # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 491 1.129 oster 492 1.55 pk 493 1.55 pk ## Memory disk device, used on boot floppies with compressed 494 1.55 pk ## kernel-plus-root-disk images. 495 1.55 pk 496 1.225 hannken #pseudo-device md 497 1.55 pk 498 1.55 pk 499 1.55 pk #### Network interfaces 500 1.55 pk 501 1.55 pk ## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue 502 1.55 pk ## Three flavors of additional SBus ethernets are available. One attaches 503 1.55 pk ## directly like the sun4c on-board, one uses the ledma device like the 504 1.55 pk ## sun4m on-board, and one uses the lebuffer device. 505 1.55 pk 506 1.56 pk le0 at obio0 addr 0xf9000000 level 6 # sun4/300 507 1.56 pk le0 at sbus0 slot ? offset ? # sun4c on-board 508 1.56 pk ledma0 at sbus0 slot ? offset ? # sun4m on-board 509 1.56 pk le0 at ledma0 # sun4m on-board 510 1.56 pk le* at sbus? slot ? offset ? # SBus 511 1.56 pk ledma* at sbus? slot ? offset ? # SBus 512 1.56 pk le* at ledma? # SBus 513 1.56 pk lebuffer0 at sbus? slot ? offset ? # SBus 514 1.56 pk le0 at lebuffer? # SBus 515 1.55 pk lebuffer* at sbus? slot ? offset ? # SBus 516 1.56 pk le* at lebuffer? # SBus 517 1.55 pk 518 1.55 pk 519 1.55 pk ## sun4/100 and sun4/200 Ethernet - an Intel 82586 on-board 520 1.55 pk ## or on a Multibus/VME card. 521 1.55 pk ie0 at obio0 addr 0xf6000000 level 6 # sun4/200 on-board 522 1.55 pk ie0 at obio0 addr 0x06000000 level 6 # sun4/100 on-board 523 1.108 pk ## VME: the first [addr,len] pair specifies the device registers; 524 1.108 pk ## the second pair specifies the on-board memory buffer 525 1.108 pk ie1 at vme0 addr 0xe88000,0xe00000 len -1,0x40000 irq 3 vect 0x75 526 1.108 pk ie2 at vme0 addr 0x31ff02,0x300000 len -1,0x40000 irq 3 vect 0x76 527 1.108 pk ie3 at vme0 addr 0x35ff02,0x300000 len -1,0x40000 irq 3 vect 0x77 528 1.108 pk ie4 at vme0 addr 0x2dff02,0x200000 len -1,0x40000 irq 3 vect 0x7c 529 1.55 pk 530 1.90 hubertf ## Quad Ethernet Controller with BigMac (be, 10/100MBd) and Mace Ethernet 531 1.90 hubertf ## (qe, 10MBd) attached. 532 1.90 hubertf qec* at sbus? slot ? offset ? # Quad Ethernet Controller 533 1.90 hubertf be* at qec? # BigMac Ethernet (10/100MBd) 534 1.90 hubertf qe* at qec? # Mace Ethernet (10MBd) 535 1.85 pk 536 1.98 pk ## Happy Meal Ethernet 537 1.98 pk hme* at sbus? slot ? offset ? 538 1.70 pk 539 1.70 pk # midway ATM 540 1.70 pk en0 at sbus? slot ? offset ? 541 1.75 pk 542 1.75 pk # PCMCIA ethernet devices 543 1.80 abs #ep* at pcmcia? 544 1.80 abs #mbe* at pcmcia? 545 1.80 abs #ne* at pcmcia? 546 1.80 abs #sm* at pcmcia? 547 1.75 pk 548 1.217 tsutsui ## PCMCIA wavelan card 549 1.217 tsutsui #wi* at pcmcia? function ? # Lucent WaveLan IEEE (802.11) 550 1.217 tsutsui 551 1.75 pk # MII/PHY support 552 1.81 pk exphy* at mii? phy ? # 3Com internal PHYs 553 1.131 wiz icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x 554 1.81 pk inphy* at mii? phy ? # Intel 82555 PHYs 555 1.81 pk lxtphy* at mii? phy ? # Level One LXT-970 PHYs 556 1.81 pk nsphy* at mii? phy ? # NS83840 PHYs 557 1.81 pk qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 558 1.81 pk sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs 559 1.81 pk tlphy* at mii? phy ? # ThunderLAN PHYs 560 1.81 pk ukphy* at mii? phy ? # generic unknown PHYs 561 1.70 pk 562 1.55 pk ## Loopback network interface; required 563 1.55 pk pseudo-device loop 564 1.55 pk 565 1.55 pk ## SLIP and CSLIP interfaces, for IP over a serial line. 566 1.185 cube pseudo-device sl 567 1.55 pk 568 1.55 pk ## PPP, the successor to SLIP. See pppd(8). 569 1.185 cube pseudo-device ppp 570 1.128 martin 571 1.128 martin ## PPP over Ethernet (RFC 2516) 572 1.128 martin pseudo-device pppoe 573 1.55 pk 574 1.55 pk ## Starmode Radio IP, a special hardware network device. 575 1.185 cube #pseudo-device strip 576 1.55 pk 577 1.55 pk ## Network "tunnel" device, allowing protocol stacks to run in the userland. 578 1.55 pk ## This is used by the third-party user-mode "ppp" program, and others. 579 1.185 cube pseudo-device tun 580 1.165 cube pseudo-device tap # virtual Ethernet 581 1.73 hwr 582 1.73 hwr ## Generic L3 over IP tunnel 583 1.185 cube #pseudo-device gre # generic L3 over IP tunnel 584 1.55 pk 585 1.55 pk ## Berkeley Packet Filter, required to run RARPD. A generic C-language 586 1.55 pk ## interface that allows selective examining of incoming packets. 587 1.184 rpaulo pseudo-device bpfilter 588 1.55 pk 589 1.188 liamjfoy #pseudo-device carp # Common Address Redundancy Protocol 590 1.188 liamjfoy 591 1.55 pk ## IP Filter, used in firewall and NAT applications. See ipnat(8) for 592 1.55 pk ## one example of the use of the IP Filter. 593 1.55 pk pseudo-device ipfilter 594 1.55 pk 595 1.94 itojun ## for IPv6 596 1.185 cube pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 597 1.185 cube #pseudo-device faith # IPv[46] tcp relay translation i/f 598 1.187 pavel pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 599 1.120 hubertf 600 1.120 hubertf ## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 601 1.120 hubertf pseudo-device vlan 602 1.122 atatat 603 1.122 atatat ## Simple inter-network traffic bridging 604 1.126 atatat pseudo-device bridge 605 1.160 uwe #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 606 1.199 martin pseudo-device agr # IEEE 802.3ad link aggregation 607 1.55 pk 608 1.217 tsutsui ## accept filters 609 1.217 tsutsui pseudo-device accf_data # "dataready" accept filter 610 1.217 tsutsui pseudo-device accf_http # "httpready" accept filter 611 1.217 tsutsui 612 1.55 pk #### Audio and video devices 613 1.55 pk 614 1.55 pk ## /dev/audio support (`audioamd' plus `audio') 615 1.55 pk ## 616 1.55 pk audioamd0 at mainbus0 # sun4c 617 1.142 jdc audioamd0 at obio0 # sun4m 618 1.55 pk audioamd0 at sbus0 slot ? offset ? # sun4m 619 1.70 pk 620 1.70 pk audiocs0 at sbus0 slot ? offset ? # SUNW,CS4231 621 1.55 pk 622 1.211 jdc #options DBRI_DEBUG # noisy debug output from the dbri driver 623 1.211 jdc #options DBRI_BIG_BUFFER # use bigger DMA buffers, for slow CPUs 624 1.186 macallan dbri* at sbus? slot ? offset ? # SUNW,DBRI[s3|e] 625 1.174 macallan 626 1.174 macallan audio* at audiobus? 627 1.55 pk 628 1.55 pk ## Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m 629 1.55 pk ## systems. If your sun4 system has a cgfour installed in the P4 slot, 630 1.55 pk ## the P4 entries for "bwtwo" will attach to the overlay plane of the 631 1.55 pk ## "cgfour". 632 1.1 deraadt 633 1.55 pk bwtwo0 at sbus0 slot ? offset ? # sun4c and sun4m 634 1.55 pk bwtwo* at sbus? slot ? offset ? # 635 1.55 pk bwtwo0 at obio0 addr 0xfd000000 level 4 # sun4/200 636 1.55 pk bwtwo0 at obio0 addr 0xfb300000 level 4 # sun4/300 in P4 slot 637 1.55 pk bwtwo0 at obio0 addr 0x0b300000 level 4 # sun4/100 in P4 slot 638 1.21 thorpej 639 1.55 pk ## Sun "cgtwo" VME color framebuffer 640 1.208 macallan # XXX no wsdisplay support 641 1.208 macallan #cgtwo0 at vme0 addr 0x400000 irq ? vect 0xa8 642 1.21 thorpej 643 1.55 pk ## Sun "cgthree" Sbus color framebuffer 644 1.55 pk cgthree0 at sbus? slot ? offset ? 645 1.55 pk cgthree* at sbus? slot ? offset ? 646 1.55 pk 647 1.55 pk ## Sun "cgfour" color framebuffer with overlay plane. See above comment 648 1.55 pk ## regarding overlay plane. 649 1.208 macallan # XXX no wsdisplay support 650 1.208 macallan #cgfour0 at obio0 addr 0xfb300000 level 4 # sun4/300 P4 651 1.208 macallan #cgfour0 at obio0 addr 0x0b300000 level 4 # sun4/100 P4 652 1.55 pk 653 1.55 pk ## Sun "cgsix" accelerated color framebuffer. 654 1.55 pk cgsix0 at sbus? slot ? offset ? 655 1.55 pk cgsix* at sbus? slot ? offset ? 656 1.55 pk cgsix0 at obio0 addr 0xfb000000 level 4 # sun4/300 P4 657 1.55 pk cgsix0 at obio0 addr 0x0b000000 level 4 # sun4/100 P4 658 1.55 pk 659 1.55 pk ## Sun "cgeight" 24-bit framebuffer 660 1.208 macallan # XXX no wsdisplay support 661 1.208 macallan #cgeight0 at obio0 addr 0xfb300000 level 4 # sun4/300 P4 662 1.208 macallan #cgeight0 at obio0 addr 0x0b300000 level 4 # sun4/100 P4 663 1.55 pk 664 1.55 pk ## Sun "tcx" accelerated color framebuffer. 665 1.215 macallan # there can be only one 666 1.215 macallan tcx0 at sbus? slot ? offset ? 667 1.33 abrown 668 1.221 macallan ## Sun CG12 / Matrox SG3 accelerated 24bit framebuffer 669 1.221 macallan cgtwelve* at sbus? slot ? offset ? 670 1.234.2.5 jdolecek # the driver can use the color framebuffer or the monochrome overlay 671 1.234.2.5 jdolecek # the latter is faster 672 1.234.2.5 jdolecek options CG12_COLOR 673 1.221 macallan 674 1.33 abrown # Sun "cgfourteen" accelerated 24-bit framebuffer. 675 1.208 macallan cgfourteen* at obio0 # sun4m 676 1.1 deraadt 677 1.106 matt # P9100-based display on Tadpole SPARCbook 3. 678 1.106 matt pnozz0 at sbus? slot ? offset ? 679 1.220 macallan # the SPARCbook 3 hardware docs say that accesses to P9100 registers need to be 680 1.220 macallan # 'latched in' but at least my 3GX works happily without 681 1.220 macallan # Enable it by default since we don't know which hardware really needs it. 682 1.220 macallan options PNOZZ_USE_LATCH 683 1.136 ad 684 1.136 ad # Sun ZX/Leo 24-bit framebuffer 685 1.213 macallan zx* at sbus? slot ? offset ? 686 1.208 macallan 687 1.208 macallan # Fujitsu AG-10e accelerated graphics 8/24-bit board 688 1.208 macallan agten* at sbus? slot ? offset ? 689 1.208 macallan 690 1.234.2.5 jdolecek ## Southland Media Systems (now Quantum 3D) MGX 691 1.234.2.5 jdolecek mgx* at sbus? slot ? offset ? 692 1.234.2.5 jdolecek 693 1.213 macallan # generic framebuffer console 694 1.213 macallan genfb* at sbus? slot ? offset ? 695 1.213 macallan 696 1.208 macallan # make sure wsdisplay0 is the console 697 1.208 macallan wsdisplay0 at wsemuldisplaydev? console 1 698 1.208 macallan wsdisplay* at wsemuldisplaydev? 699 1.1 deraadt 700 1.55 pk #### Other device configuration 701 1.106 matt 702 1.106 matt # Tadpole microcontroller 703 1.106 matt tctrl0 at obio0 704 1.24 thorpej 705 1.219 bouyer # Aurora Personality Chip (APC) on SPARCstation-4/5 706 1.219 bouyer # Not enabled by default as it may hang some systems 707 1.219 bouyer #apc* at sbus? slot ? offset ? 708 1.219 bouyer 709 1.55 pk ## Pseudo ttys, required for network logins and programs like screen. 710 1.24 thorpej 711 1.117 jdolecek pseudo-device pty # pseudo-terminals 712 1.55 pk 713 1.55 pk ## Random device, used to implement /dev/random (a source of random noise), 714 1.55 pk ## and generate randomness for some kernel formulae. 715 1.55 pk 716 1.91 phil 717 1.91 phil # a pseudo device needed for Coda # also needs CODA (above) 718 1.234.2.3 tls pseudo-device vcoda # coda minicache <-> venus comm. 719 1.135 lukem 720 1.135 lukem pseudo-device clockctl # user control of clock subsystem 721 1.147 ragge pseudo-device ksyms # /dev/ksyms 722 1.155 itojun #pseudo-device pf # PF packet filter 723 1.155 itojun #pseudo-device pflog # PF log if 724 1.222 pooka pseudo-device fss # file system snapshot device 725 1.208 macallan pseudo-device wsmux # mouse and keyboard multiplexor 726 1.208 macallan pseudo-device wsfont 727 1.218 pooka pseudo-device putter # for puffs and pud 728 1.182 elad 729 1.211 jdc #options FILEASSOC # fileassoc(9) 730 1.234.2.5 jdolecek # and PAX_SEGVGUARD 731 1.197 elad 732 1.182 elad # Veriexec 733 1.182 elad # 734 1.182 elad # a pseudo device needed for veriexec 735 1.234.2.3 tls #pseudo-device veriexec 736 1.182 elad # 737 1.182 elad # Uncomment the fingerprint methods below that are desired. Note that 738 1.182 elad # removing fingerprint methods will have almost no impact on the kernel 739 1.182 elad # code size. 740 1.182 elad # 741 1.182 elad #options VERIFIED_EXEC_FP_SHA256 742 1.182 elad #options VERIFIED_EXEC_FP_SHA384 743 1.182 elad #options VERIFIED_EXEC_FP_SHA512 744 1.193 elad 745 1.194 elad #options PAX_MPROTECT=0 # PaX mprotect(2) restrictions 746 1.197 elad # (for static binaries only for now) 747
Indexes created Tue Oct 28 12:10:06 GMT 2025