GENERIC revision 1.165
1 # $NetBSD: GENERIC,v 1.165 2005/01/17 15:28:52 cube Exp $ 2 # 3 # GENERIC machine description file 4 # 5 # This machine description file is used to generate the default NetBSD 6 # kernel. The generic kernel does not include all options, subsystems 7 # and device drivers, but should be useful for most applications. 8 # 9 # The machine description file can be customised for your specific 10 # machine to reduce the kernel size and improve its performance. 11 # 12 # For further information on compiling NetBSD kernels, see the config(8) 13 # man page. 14 # 15 # For further information on hardware support for this architecture, see 16 # the intro(4) man page. For further information about kernel options 17 # for this architecture, see the options(4) man page. For an explanation 18 # of each device driver in this file see the section 4 man page for the 19 # device. 20 21 include "arch/sparc/conf/std.sparc" 22 23 options INCLUDE_CONFIG_FILE # embed config file in kernel binary 24 25 #ident "GENERIC-$Revision: 1.165 $" 26 27 maxusers 32 28 29 ## System kernel configuration. See options(4) for more detail. 30 31 32 # Options for variants of the Sun SPARC architecure. 33 # We currently support three architecture types; at least one is required. 34 options SUN4 # sun4/100, sun4/200, sun4/300 35 options SUN4C # sun4c - SS1, 1+, 2, ELC, SLC, IPC, IPX, etc. 36 options SUN4M # sun4m - SS10, SS20, Classic, etc. 37 options SUN4D # sun4d - SS1000, SC2000 38 39 options SUN4_MMU3L # sun4/400 3-level MMU 40 41 ## System options specific to the sparc machine type 42 43 # Blink the power LED on some machines to indicate the system load. 44 #options BLINK 45 46 ## Use a faster console than the PROM's slow drawing routines. Not needed 47 ## for headless (no framebuffer) machines. 48 options RASTERCONSOLE # fast rasterop console 49 options FONT_GALLANT12x22 # the console font 50 #options FONT_BOLD8x16 # a somewhat smaller font 51 ## default console colors: black-on-white; this can be changed 52 ## using the following two options. 53 #options RASTERCONSOLE_FGCOL=WSCOL_BLACK 54 #options RASTERCONSOLE_BGCOL=WSCOL_WHITE 55 56 #### System options that are the same for all ports 57 58 ## Root device configuration: change the ?'s if you are going to use a 59 ## nonstandard root partition (other than where the kernel is booted from) 60 ## and/or nonstandard root type (not ffs or nfs). Normally this can be 61 ## automagically determined at boot time. 62 63 config netbsd root on ? type ? 64 65 ## System call tracing (see ktrace(1)). 66 options KTRACE 67 options SYSTRACE # system call vetting via systrace(1) 68 69 ## Collect statistics on kernel malloc's and free's. This does have a 70 ## significant performance hit on slower machines, so it is intended for 71 ## diagnostic use only. 72 #options KMEMSTATS 73 74 ## System V compatible IPC subsystem. (msgctl(2), semctl(2), and shmctl(2)) 75 options SYSVMSG # System V message queues 76 options SYSVSEM # System V semaphores 77 #options SEMMNI=10 # number of semaphore identifiers 78 #options SEMMNS=60 # number of semaphores in system 79 #options SEMUME=10 # max number of undo entries per process 80 #options SEMMNU=30 # number of undo structures in system 81 options SYSVSHM # System V shared memory 82 #options SHMMAXPGS=1024 # 1024 pages is the default 83 options P1003_1B_SEMAPHORE # p1003.1b semaphore support 84 85 ## Loadable kernel module support; still under development. 86 options LKM 87 88 options USERCONF # userconf(4) support 89 #options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 90 options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 91 92 # Enable experimental buffer queue strategy for better responsiveness under 93 # high disk I/O load. Use it with caution - it's not proven to be stable yet. 94 #options NEW_BUFQ_STRATEGY 95 96 ## NFS boot options; tries DHCP/BOOTP then BOOTPARAM 97 options NFS_BOOT_BOOTPARAM 98 #options NFS_BOOT_BOOTP 99 options NFS_BOOT_DHCP 100 101 #### Debugging options 102 103 ## The DDB in-kernel debugger runs at panic (unless DDB_ONPANIC=0), or at 104 ## serial console break or keyboard reset, where the PROM would normally 105 ## intercept. DDB_HISTORY_SIZE adds up/down arrow command history. 106 #options DDB # kernel dynamic debugger 107 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 108 #options DDB_ONPANIC=1 # see also sysctl(8): `ddb.onpanic' 109 110 ## You may also use gdb, on another computer connected to this machine over 111 ## a serial port. Both KGDB_DEV and KGDB_DEVRATE should be specified; 112 ## KGDB_DEV is a dev_t encoded device number of the serial port to use, where 113 ## the minor device number encodes the PROM enumeration of the serial ports, 114 ## i.e.: 115 ## 0xc00 = ttya, 0xc01 = ttyb, 0xc02 = ttyc, 0xc03 = ttyd. 116 ## (Note: ttyc and ttyd are available only on some sun4 models) 117 #options KGDB # support for kernel gdb 118 #options KGDB_DEV=0xc01 # kgdb device number (this is `ttyb') 119 #options KGDB_DEVRATE=38400 # baud rate 120 121 122 ## Compile the kernel with debugging symbols (`netbsd.gdb' is the debug file), 123 ## such that gdb(1) can be used on a kernel coredump. 124 125 #makeoptions DEBUG="-g" 126 127 128 ## Adds code to the kernel that does internal consistency checks, and will 129 ## cause the kernel to panic if corruption of internal data structures 130 ## is detected. 131 #options DIAGNOSTIC # extra kernel sanity checking 132 133 ## Enable (possibly expensive) debugging code that may also display messages 134 ## on the system console 135 #options DEBUG 136 137 ## Make SCSI error messages more verbose when explaining their meanings. 138 options SCSIVERBOSE 139 140 options MIIVERBOSE # verbose PHY autoconfig messages 141 142 ## `INSECURE' turns off the kernel security level (securelevel = 0 always). 143 ## This allows writing to /dev/mem, loading kernel modules while multi-user, 144 ## and other insecurities good only for development work. Do not use this 145 ## option on a production machine. 146 #options INSECURE 147 148 ## `FDSCRIPTS' allows non-readable but executable scripts by providing a 149 ## pre-opened opaque file to the script interpreter. `SETUIDSCRIPTS', 150 ## which implies FDSCRIPTS, allows scripts to be set-user-id using the same 151 ## opaque file mechanism. Perl calls this "secure setuid scripts." 152 153 #options FDSCRIPTS 154 #options SETUIDSCRIPTS 155 156 ## Options for compatibility with previous releases foreign system binaries. 157 ## In the cases of COMPAT_SUNOS and COMPAT_SVR4, you may need to set up 158 ## additional user-level utilities or system configuration files. See 159 ## compat_sunos(8) and compat_svr4(8). 160 161 options COMPAT_43 # 4.3BSD system interfaces 162 options COMPAT_10 # NetBSD 1.0 binary compatibility 163 options COMPAT_11 # NetBSD 1.1 binary compatibility 164 options COMPAT_12 # NetBSD 1.2 binary compatibility 165 options COMPAT_13 # NetBSD 1.3 binary compatibility 166 options COMPAT_14 # NetBSD 1.4 binary compatibility 167 options COMPAT_16 # NetBSD 1.6 binary compatibility 168 options COMPAT_20 # NetBSD 2.0 binary compatibility 169 options COMPAT_SUNOS # SunOS 4.x binary compatibility 170 options COMPAT_SVR4 # SunOS 5.x binary compatibility 171 options COMPAT_BSDPTY # /dev/[pt]ty?? ptys. 172 173 ## File systems. You probably need at least one of FFS or NFS. 174 file-system FFS # Berkeley Fast Filesystem 175 file-system NFS # Sun NFS-compatible filesystem client 176 file-system KERNFS # kernel data-structure filesystem 177 file-system NULLFS # NULL layered filesystem 178 file-system OVERLAY # overlay file system 179 file-system MFS # memory-based filesystem 180 file-system FDESC # user file descriptor filesystem 181 file-system UMAPFS # uid/gid remapping filesystem 182 file-system LFS # Log-based filesystem (still experimental) 183 file-system PORTAL # portal filesystem (still experimental) 184 file-system PROCFS # /proc 185 file-system CD9660 # ISO 9660 + Rock Ridge file system 186 file-system UNION # union file system 187 file-system MSDOSFS # MS-DOS FAT filesystem(s). 188 file-system CODA # Coda File System; also needs vcoda (below) 189 190 ## File system options. 191 options NFSSERVER # Sun NFS-compatible filesystem server 192 options QUOTA # FFS quotas 193 #options FFS_EI # FFS Endian Independent support 194 options SOFTDEP # FFS soft updates support. 195 196 ## Network protocol support. In most environments, INET is required. 197 options INET # IP (Internet Protocol) v4 198 options INET6 # IPV6 199 #options IPSEC # IP security 200 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 201 #options IPSEC_DEBUG # debug for IP security 202 #options GATEWAY # packet forwarding ("router switch") 203 #options MROUTING # packet forwarding of multicast packets 204 #options PIM # Protocol Independent Multicast 205 #options DIRECTED_BROADCAST # allow broadcasts through routers 206 options NS # Xerox NS networking 207 #options NSIP # Xerox NS tunneling over IP 208 options ISO,TPIP # OSI networking 209 #options EON # OSI tunneling over IP 210 #options CCITT,LLC,HDLC # X.25 packet switched protocol 211 #options NETATALK # AppleTalk (over Ethernet) protocol 212 options NTP # Network Time Protocol in-kernel support 213 #options PPS_SYNC # Add serial line synchronization for NTP 214 options PFIL_HOOKS # Add pfil(9) hooks, intended for custom LKMs. 215 options IPFILTER_LOG # Add ipmon(8) logging for ipfilter device 216 #options IPFILTER_DEFAULT_BLOCK # block all packets by default 217 options PPP_BSDCOMP # Add BSD compression to ppp device 218 options PPP_DEFLATE # Add deflate (libz) compression to ppp device 219 options PPP_FILTER # Add active filters for ppp (via bpf) 220 221 #options ALTQ # Manipulate network interfaces' output queues 222 #options ALTQ_BLUE # Stochastic Fair Blue 223 #options ALTQ_CBQ # Class-Based Queueing 224 #options ALTQ_CDNR # Diffserv Traffic Conditioner 225 #options ALTQ_FIFOQ # First-In First-Out Queue 226 #options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 227 #options ALTQ_HFSC # Hierarchical Fair Service Curve 228 #options ALTQ_LOCALQ # Local queueing discipline 229 #options ALTQ_PRIQ # Priority Queueing 230 #options ALTQ_RED # Random Early Detection 231 #options ALTQ_RIO # RED with IN/OUT 232 #options ALTQ_WFQ # Weighted Fair Queueing 233 234 235 236 #### Main bus and CPU .. all systems. 237 mainbus0 at root 238 cpu0 at mainbus0 239 cpuunit0 at mainbus0 # sun4d 240 cpuunit* at mainbus0 # sun4d 241 cpu0 at cpuunit0 # sun4d 242 243 #### Bus types found on SPARC systems. 244 245 sbus0 at mainbus0 # sun4c 246 obio0 at mainbus0 # sun4 and sun4m 247 sparcvme0 at mainbus0 # sun4 248 iommu0 at mainbus0 # sun4m 249 sbus0 at iommu0 # sun4m 250 sparcvme0 at iommu0 # sun4m 251 vme0 at sparcvme0 # MI VME attachment 252 bootbus0 at cpuunit0 # sun4d 253 bootbus* at cpuunit? # sun4d 254 255 ## SBus expander box 256 xbox* at sbus? slot ? offset ? 257 sbus* at xbox? 258 259 ## SBus to PCMCIA bridge 260 nell* at sbus? slot ? offset ? # PCMCIA bridge 261 pcmcia* at nell? 262 263 #### Standard system devices -- all required for a given architecture 264 265 ## Auxiliary system registers on sun4c and sun4m 266 auxreg0 at mainbus0 # sun4c 267 auxreg0 at obio0 # sun4m 268 auxiotwo0 at obio0 # only on Tadpole SPARCbook. 269 270 ## Power status and control register on Sun4m systems 271 power0 at obio0 272 273 ## Mostek clock found on 4/300, sun4c, sun4m and sun4d systems. 274 ## The Mostek clock NVRAM is the "eeprom" on sun4/300 systems. 275 clock0 at mainbus0 # sun4c 276 clock0 at obio0 # sun4m 277 clock0 at obio0 addr 0xf2000000 # sun4/300 278 clock0 at bootbus0 # sun4d 279 280 ## Intersil clock found on 4/100 and 4/200 systems. 281 oclock0 at obio0 addr 0xf3000000 # sun4/200 282 oclock0 at obio0 addr 0x03000000 # sun4/100 283 284 ## Memory error registers. 285 memreg0 at mainbus0 # sun4c 286 memreg0 at obio0 # sun4m 287 memreg0 at obio0 addr 0xf4000000 # sun4/200 and sun4/300 288 memreg0 at obio0 addr 0x04000000 # sun4/100 289 290 ## ECC memory control 291 eccmemctl0 at mainbus0 # sun4m 292 293 ## Timer chip found on 4/300, sun4c, and sun4m systems. 294 timer0 at mainbus0 # sun4c 295 timer0 at obio0 # sun4m 296 timer0 at obio0 addr 0xef000000 # sun4/300 297 298 ## EEPROM found on 4/100 and 4/200 systems. Note that the 4/300 299 ## doesn't use this driver; the `EEPROM' is in the NVRAM on the 300 ## Mostek clock chip on 4/300 systems. 301 eeprom0 at obio0 addr 0xf2000000 # sun4/200 302 eeprom0 at obio0 addr 0x02000000 # sun4/100 303 304 305 #### Serial port configuration 306 307 ## Zilog 8530 serial chips. Each has two-channels. 308 ## zs0 is ttya and ttyb. zs1 is the keyboard and mouse. 309 zs0 at mainbus0 # sun4c 310 zs0 at obio0 # sun4m 311 zs0 at obio0 addr 0xf1000000 level 12 # sun4/200 and sun4/300 312 zs0 at obio0 addr 0x01000000 level 12 # sun4/100 313 zs0 at bootbus0 # sun4d 314 zstty0 at zs0 channel 0 # ttya 315 zstty1 at zs0 channel 1 # ttyb 316 317 zs1 at mainbus0 # sun4c 318 zs1 at obio0 # sun4m 319 zs1 at obio0 addr 0xf0000000 level 12 # sun4/200 and sun4/300 320 zs1 at obio0 addr 0x00000000 level 12 # sun4/100 321 zs1 at bootbus0 # sun4d 322 kbd0 at zs1 channel 0 # keyboard 323 ms0 at zs1 channel 1 # mouse 324 325 zs2 at obio0 addr 0xe0000000 level 12 # sun4/300 326 zstty2 at zs2 channel 0 # ttyc 327 zstty3 at zs2 channel 1 # ttyd 328 329 zs* at bootbus? # sun4d 330 zstty* at zs? 331 332 ## NS16x50 serial chips and clones. Present on the 333 ## Sun JavaStation-1 and Tadpole SPARCbook 3 334 com* at obio0 # sun4m 335 336 # Parallel port. 337 bpp* at sbus? slot? offset ? 338 339 ## Magma Serial/Parallel driver 340 magma* at sbus? slot ? offset ? 341 mtty* at magma? 342 mbpp* at magma? 343 344 ## SUNW,spif Serial/Parallel driver 345 spif* at sbus? slot ? offset ? 346 stty* at spif? 347 sbpp* at spif? 348 349 ## PCMCIA serial interfaces 350 #com* at pcmcia? 351 #pcmcom* at pcmcia? 352 #com* at pcmcom? 353 354 #### Disk controllers and disks 355 356 # 357 358 ## The following flags may be set for the NCR53c94 based esp driver: 359 ## bits 0-7: disable disconnect/reselect for the corresponding target 360 ## bits 8-15: disable synchronous negotiation for target [bit-8] 361 362 ## sun4/300, sun4c, sun4m on-board SCSI, and FSBE/S SBus SCSI cards. 363 ## Both `dma' and `esp' are needed in all cases. 364 ## Two kinds of additional SBus SCSI interfaces are available. One uses 365 ## "esp at sbus" like the sun4c on-board; the other uses "esp at dma". 366 367 ## sun4/300 SCSI - an NCR53c94 or equivalent behind 368 ## an LSI Logic DMA controller 369 370 dma0 at obio0 addr 0xfa001000 level 4 # sun4/300 371 esp0 at obio0 addr 0xfa000000 level 4 flags 0x0000 # sun4/300 372 373 dma0 at sbus0 slot ? offset ? # sun4c/sun4m 374 esp0 at sbus0 slot ? offset ? flags 0x0000 # sun4c 375 esp0 at dma0 flags 0x0000 # sun4m 376 377 # FSBE/S SCSI & SunSwift Sbus FAS366 378 dma* at sbus? slot ? offset ? # SBus 379 esp* at sbus? slot ? offset ? flags 0x0000 # SBus 380 esp* at dma? flags 0x0000 # SBus 381 382 scsibus* at esp? 383 384 ## Qlogic ISP SBus SCSI Card 385 isp* at sbus? slot ? offset ? 386 scsibus* at isp? 387 388 ## NCR5380-based "Sun SCSI 3" VME SCSI controller. 389 ## This driver has several flags which may be enabled by OR'ing 390 ## the values and using the "flags" directive. 391 ## Valid flags are: 392 ## 393 ## 0x01 Use DMA (may be polled) 394 ## 0x02 Use DMA completion interrupts 395 ## 0x04 Allow disconnect/reselect 396 ## 397 ## E.g. the following would enable DMA, interrupts, and reselect: 398 ## si0 at vme0 addr 0x200000 irq 3 vect 0x40 flags 0x07 399 ## 400 ## By default, DMA is enabled in the driver. 401 402 si0 at vme0 addr 0x200000 irq 2 vect 0x40 403 scsibus* at si? 404 405 ## NCR5380-based "SCSI Weird" on-board SCSI interface found 406 ## on sun4/100 systems. The flags are the same as the "si" 407 ## controller. Note, while DMA is enabled by default, only 408 ## polled DMA works at this time, and reselects do not work 409 ## on this particular controller. 410 411 sw0 at obio0 addr 0x0a000000 level 3 412 scsibus* at sw? 413 414 ## PCMCIA SCSI controllers 415 #aic* at pcmcia? 416 #scsibus* at aic? 417 418 419 ## These entries find devices on all SCSI busses and assign 420 ## unit numbers dynamically. 421 sd* at scsibus? target ? lun ? # SCSI disks 422 st* at scsibus? target ? lun ? # SCSI tapes 423 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 424 ch* at scsibus? target ? lun ? # SCSI changer devices 425 ss* at scsibus? target ? lun ? # SCSI scanners 426 ses* at scsibus? target ? lun ? # SCSI SES/SAF-TE 427 uk* at scsibus? target ? lun ? # unknown SCSI 428 429 430 ## Xylogics 753 or 7053 VME SMD disk controllers and disks, found 431 ## on sun4 systems. 432 xdc0 at vme0 addr 0xee80 irq 3 vect 0x44 433 xdc1 at vme0 addr 0xee90 irq 3 vect 0x45 434 xdc2 at vme0 addr 0xeea0 irq 3 vect 0x46 435 xdc3 at vme0 addr 0xeeb0 irq 3 vect 0x47 436 xd* at xdc? drive ? 437 438 ## Xylogics 451 or 451 VME SMD disk controllers and disks, found 439 ## on sun4 systems. 440 xyc0 at vme0 addr 0xee40 irq 3 vect 0x48 441 xyc1 at vme0 addr 0xee48 irq 3 vect 0x49 442 xy* at xyc? drive ? 443 444 445 ## Floppy controller and drive found on SPARCstations. 446 447 fdc0 at mainbus0 # sun4c controller 448 fdc0 at obio0 # sun4m controller 449 fd* at fdc0 # the drive itself 450 451 ## PCMCIA IDE controllers 452 #wdc* at pcmcia? 453 #atabus* at ata? 454 #wd* at atabus? drive ? flags 0x0000 455 456 ## PCMCIA wavelan card 457 #wi* at pcmcia? function ? # Lucent WaveLan IEEE (802.11) 458 459 ## A disk-like interface to files. Can be used to create floppy, CD, 460 ## miniroot images, etc. 461 462 pseudo-device vnd 4 463 464 ## Concatenated and striped disks; with this, you can create a software-based 465 ## disk array similar to a "RAID 0" setup. See ccd(4). 466 467 pseudo-device ccd 4 468 469 ## Cryptographic disk devices; See cgd(4) 470 471 #pseudo-device cgd 4 472 473 ## RAIDframe disk driver: software RAID driver. See raid(4). 474 475 pseudo-device raid 8 476 options RAID_AUTOCONFIG # auto-configuration of RAID components 477 # Options to enable various other RAIDframe RAID types. 478 # options RF_INCLUDE_EVENODD=1 479 # options RF_INCLUDE_RAID5_RS=1 480 # options RF_INCLUDE_PARITYLOGGING=1 481 # options RF_INCLUDE_CHAINDECLUSTER=1 482 # options RF_INCLUDE_INTERDECLUSTER=1 483 # options RF_INCLUDE_PARITY_DECLUSTERING=1 484 # options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 485 486 487 ## Memory disk device, used on boot floppies with compressed 488 ## kernel-plus-root-disk images. 489 490 #pseudo-device md 1 491 492 493 #### Network interfaces 494 495 ## LANCE Ethernet - an AMD 7990 LANCE behind specialized DMA glue 496 ## Three flavors of additional SBus ethernets are available. One attaches 497 ## directly like the sun4c on-board, one uses the ledma device like the 498 ## sun4m on-board, and one uses the lebuffer device. 499 500 le0 at obio0 addr 0xf9000000 level 6 # sun4/300 501 le0 at sbus0 slot ? offset ? # sun4c on-board 502 ledma0 at sbus0 slot ? offset ? # sun4m on-board 503 le0 at ledma0 # sun4m on-board 504 le* at sbus? slot ? offset ? # SBus 505 ledma* at sbus? slot ? offset ? # SBus 506 le* at ledma? # SBus 507 lebuffer0 at sbus? slot ? offset ? # SBus 508 le0 at lebuffer? # SBus 509 lebuffer* at sbus? slot ? offset ? # SBus 510 le* at lebuffer? # SBus 511 512 513 ## sun4/100 and sun4/200 Ethernet - an Intel 82586 on-board 514 ## or on a Multibus/VME card. 515 ie0 at obio0 addr 0xf6000000 level 6 # sun4/200 on-board 516 ie0 at obio0 addr 0x06000000 level 6 # sun4/100 on-board 517 ## VME: the first [addr,len] pair specifies the device registers; 518 ## the second pair specifies the on-board memory buffer 519 ie1 at vme0 addr 0xe88000,0xe00000 len -1,0x40000 irq 3 vect 0x75 520 ie2 at vme0 addr 0x31ff02,0x300000 len -1,0x40000 irq 3 vect 0x76 521 ie3 at vme0 addr 0x35ff02,0x300000 len -1,0x40000 irq 3 vect 0x77 522 ie4 at vme0 addr 0x2dff02,0x200000 len -1,0x40000 irq 3 vect 0x7c 523 524 ## Quad Ethernet Controller with BigMac (be, 10/100MBd) and Mace Ethernet 525 ## (qe, 10MBd) attached. 526 qec* at sbus? slot ? offset ? # Quad Ethernet Controller 527 be* at qec? # BigMac Ethernet (10/100MBd) 528 qe* at qec? # Mace Ethernet (10MBd) 529 530 ## Happy Meal Ethernet 531 hme* at sbus? slot ? offset ? 532 533 # midway ATM 534 en0 at sbus? slot ? offset ? 535 536 # PCMCIA ethernet devices 537 #ep* at pcmcia? 538 #mbe* at pcmcia? 539 #ne* at pcmcia? 540 #sm* at pcmcia? 541 542 # MII/PHY support 543 exphy* at mii? phy ? # 3Com internal PHYs 544 icsphy* at mii? phy ? # Integrated Circuit Systems ICS189x 545 inphy* at mii? phy ? # Intel 82555 PHYs 546 lxtphy* at mii? phy ? # Level One LXT-970 PHYs 547 nsphy* at mii? phy ? # NS83840 PHYs 548 qsphy* at mii? phy ? # Quality Semiconductor QS6612 PHYs 549 sqphy* at mii? phy ? # Seeq 80220/80221/80223 PHYs 550 tlphy* at mii? phy ? # ThunderLAN PHYs 551 ukphy* at mii? phy ? # generic unknown PHYs 552 553 ## Loopback network interface; required 554 pseudo-device loop 555 556 ## SLIP and CSLIP interfaces, for IP over a serial line. 557 pseudo-device sl 2 558 559 ## PPP, the successor to SLIP. See pppd(8). 560 pseudo-device ppp 2 561 562 ## PPP over Ethernet (RFC 2516) 563 pseudo-device pppoe 564 565 ## Starmode Radio IP, a special hardware network device. 566 #pseudo-device strip 1 567 568 ## Network "tunnel" device, allowing protocol stacks to run in the userland. 569 ## This is used by the third-party user-mode "ppp" program, and others. 570 pseudo-device tun 4 571 pseudo-device tap # virtual Ethernet 572 573 ## Generic L3 over IP tunnel 574 #pseudo-device gre 2 # generic L3 over IP tunnel 575 576 ## Berkeley Packet Filter, required to run RARPD. A generic C-language 577 ## interface that allows selective examining of incoming packets. 578 pseudo-device bpfilter 8 579 580 ## IP Filter, used in firewall and NAT applications. See ipnat(8) for 581 ## one example of the use of the IP Filter. 582 pseudo-device ipfilter 583 584 ## for IPv6 585 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 586 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 587 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 588 589 ## IEEE 802.1Q Virtual LAN encapsulation, see vlan(4). 590 pseudo-device vlan 591 592 ## Simple inter-network traffic bridging 593 pseudo-device bridge 594 #options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 595 596 #### Audio and video devices 597 598 ## /dev/audio support (`audioamd' plus `audio') 599 ## 600 audioamd0 at mainbus0 # sun4c 601 audioamd0 at obio0 # sun4m 602 audioamd0 at sbus0 slot ? offset ? # sun4m 603 audio* at audioamd0 604 605 audiocs0 at sbus0 slot ? offset ? # SUNW,CS4231 606 audio* at audiocs0 607 608 609 ## Sun "bwtwo" black and white framebuffer, found on sun4, sun4c, and sun4m 610 ## systems. If your sun4 system has a cgfour installed in the P4 slot, 611 ## the P4 entries for "bwtwo" will attach to the overlay plane of the 612 ## "cgfour". 613 614 bwtwo0 at sbus0 slot ? offset ? # sun4c and sun4m 615 bwtwo* at sbus? slot ? offset ? # 616 bwtwo0 at obio0 addr 0xfd000000 level 4 # sun4/200 617 bwtwo0 at obio0 addr 0xfb300000 level 4 # sun4/300 in P4 slot 618 bwtwo0 at obio0 addr 0x0b300000 level 4 # sun4/100 in P4 slot 619 620 ## Sun "cgtwo" VME color framebuffer 621 cgtwo0 at vme0 addr 0x400000 irq ? vect 0xa8 622 623 ## Sun "cgthree" Sbus color framebuffer 624 cgthree0 at sbus? slot ? offset ? 625 cgthree* at sbus? slot ? offset ? 626 #cgthree0 at obio? slot ? offset ? # sun4m 627 628 ## Sun "cgfour" color framebuffer with overlay plane. See above comment 629 ## regarding overlay plane. 630 cgfour0 at obio0 addr 0xfb300000 level 4 # sun4/300 P4 631 cgfour0 at obio0 addr 0x0b300000 level 4 # sun4/100 P4 632 633 ## Sun "cgsix" accelerated color framebuffer. 634 cgsix0 at sbus? slot ? offset ? 635 cgsix* at sbus? slot ? offset ? 636 cgsix0 at obio0 addr 0xfb000000 level 4 # sun4/300 P4 637 cgsix0 at obio0 addr 0x0b000000 level 4 # sun4/100 P4 638 639 ## Sun "cgeight" 24-bit framebuffer 640 cgeight0 at obio0 addr 0xfb300000 level 4 # sun4/300 P4 641 cgeight0 at obio0 addr 0x0b300000 level 4 # sun4/100 P4 642 643 ## Sun "tcx" accelerated color framebuffer. 644 tcx0 at sbus? slot ? offset ? 645 tcx* at sbus? slot ? offset ? 646 647 # Sun "cgfourteen" accelerated 24-bit framebuffer. 648 cgfourteen0 at obio0 # sun4m 649 650 # P9100-based display on Tadpole SPARCbook 3. 651 pnozz0 at sbus? slot ? offset ? 652 653 # Sun ZX/Leo 24-bit framebuffer 654 zx* at sbus? slot ? offset ? 655 656 #### Other device configuration 657 658 # Tadpole microcontroller 659 tctrl0 at obio0 660 661 ## Pseudo ttys, required for network logins and programs like screen. 662 663 pseudo-device pty # pseudo-terminals 664 665 ## Random device, used to implement /dev/random (a source of random noise), 666 ## and generate randomness for some kernel formulae. 667 668 pseudo-device rnd 669 670 # a pseudo device needed for Coda # also needs CODA (above) 671 pseudo-device vcoda 4 # coda minicache <-> venus comm. 672 673 pseudo-device clockctl # user control of clock subsystem 674 pseudo-device ksyms # /dev/ksyms 675 #pseudo-device pf # PF packet filter 676 #pseudo-device pflog # PF log if 677
Indexes created Thu Oct 02 10:09:58 GMT 2025