Home | History | Annotate | Line # | Download | only in conf
      1 # $NetBSD: GENERIC,v 1.192 2024/01/13 19:31:39 tsutsui Exp $
      2 #
      3 # GENERIC machine description file
      4 # 
      5 # This machine description file is used to generate the default NetBSD
      6 # kernel.  The generic kernel does not include all options, subsystems
      7 # and device drivers, but should be useful for most applications.
      8 #
      9 # The machine description file can be customised for your specific
     10 # machine to reduce the kernel size and improve its performance.
     11 #
     12 # For further information on compiling NetBSD kernels, see the config(8)
     13 # man page.
     14 #
     15 # For further information on hardware support for this architecture, see
     16 # the intro(4) man page.  For further information about kernel options
     17 # for this architecture, see the options(4) man page.  For an explanation
     18 # of each device driver in this file see the section 4 man page for the
     19 # device.
     20 
     21 # Supports Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E)
     22 # Supports root on: ie0, le0, sd*, ...
     23 
     24 include 	"arch/sun3/conf/std.sun3"
     25 
     26 #options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
     27 
     28 #ident		"GENERIC-$Revision: 1.192 $"
     29 
     30 makeoptions	COPTS="-Os -fno-unwind-tables -fno-omit-frame-pointer"
     31 	# Bootloader has size limit (~2MB). -fno-omit-frame-pointer is
     32 	# necessary for backtraces in DDB.
     33 
     34 # Machines to be supported by this kernel
     35 options 	FPU_EMULATE
     36 options 	HAVECACHE		# Sun3/260 VAC
     37 
     38 # Needs to be set per system.  i.e change these as you see fit
     39 maxusers	4
     40 
     41 # Standard system options
     42 options 	KTRACE		# system call tracing
     43 options 	SYSVMSG		# System V message queues
     44 options 	SYSVSEM		# System V semaphores
     45 options 	SYSVSHM		# System V shared memory
     46 
     47 #options 	MODULAR		# new style module(7) framework
     48 #options 	MODULAR_DEFAULT_AUTOLOAD
     49 
     50 #options 	INSECURE	# disable kernel security level
     51 #options 	USERCONF	# userconf(4) support
     52 options 	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
     53 #options 	SYSCTL_INCLUDE_DESCR	# Include sysctl descriptions in kernel
     54 
     55 # Alternate buffer queue strategies for better responsiveness under high
     56 # disk I/O load.
     57 #options 	BUFQ_READPRIO
     58 #options 	BUFQ_PRIOCSCAN
     59 
     60 # Which kernel debugger?  Uncomment either this:
     61 options 	DDB
     62 # ... or these for KGDB (gdb remote target)
     63 makeoptions	DEBUG="-g"	# debugging symbols for gdb
     64 #options 	KGDB
     65 #options 	KGDB_DEV=0x0C01	# ttya=0C00 ttyb=0C01
     66 
     67 # Other debugging options
     68 options 	DDB_HISTORY_SIZE=512	# enable history editing in DDB
     69 #options 	DEBUG		# kernel debugging code
     70 #options 	DIAGNOSTIC	# extra kernel sanity checking
     71 #options 	PMAP_DEBUG
     72 #options 	SCSIDEBUG
     73 #options 	SCSIVERBOSE		# Verbose SCSI errors
     74 
     75 # Compatibility options
     76 # Originally in NetBSD 1.0, but limited to 6.0 for size.
     77 #include 	"conf/compat_netbsd10.config"
     78 include 	"conf/compat_netbsd60.config"
     79 
     80 #options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
     81 #options 	COMPAT_AOUT_M68K # support for NetBSD a.out executables
     82 #options 	COMPAT_LINUX	# can run Linux/m68k executables
     83 #options 	COMPAT_OSSAUDIO	# can run Linux/m68k executables
     84 #options 	EXEC_AOUT	# support for a.out executables
     85 
     86 # File systems
     87 file-system	FFS		# Berkeley Fast Filesystem
     88 file-system	NFS		# Sun NFS client support
     89 file-system	CD9660		# ISO 9660 + Rock Ridge file system
     90 #file-system	FDESC		# /dev/fd/*
     91 #file-system	KERNFS		# /kern
     92 file-system	NULLFS		# loopback file system
     93 #file-system	OVERLAY		# overlay file system
     94 file-system	PROCFS		# /proc
     95 #file-system	UNION		# union file system
     96 file-system	MFS		# memory-based filesystem
     97 file-system	PTYFS		# /dev/pts/N support
     98 # Disabled as 20KB larger than MFS.
     99 #file-system	TMPFS		# Efficient memory file-system
    100 #file-system	UDF		# experimental - OSTA UDF CD/DVD file-system
    101 
    102 # File system options
    103 #options 	FFS_EI		# FFS Endian Independent support
    104 options 	FFS_NO_SNAPSHOT	# No FFS snapshot support
    105 #options 	QUOTA		# legacy UFS quotas
    106 #options 	QUOTA2		# new, in-filesystem UFS quotas
    107 #options 	UFS_DIRHASH	# UFS Large Directory Hashing
    108 #options 	UFS_EXTATTR	# Extended attribute support for UFS1
    109 #options 	WAPBL		# File system journaling support
    110 #options 	NFSSERVER	# Network File System server
    111 
    112 # Networking options
    113 options 	INET		# IP protocol stack support
    114 #options 	INET6		# IPV6
    115 #options 	IPSEC		# IP security
    116 #options 	IPSEC_DEBUG	# debug for IP security
    117 #options 	GATEWAY		# IP packet forwarding
    118 #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
    119 
    120 #options 	ALTQ		# Manipulate network interfaces' output queues
    121 #options 	ALTQ_BLUE	# Stochastic Fair Blue
    122 #options 	ALTQ_CBQ	# Class-Based Queueing
    123 #options 	ALTQ_CDNR	# Diffserv Traffic Conditioner
    124 #options 	ALTQ_FIFOQ	# First-In First-Out Queue
    125 #options 	ALTQ_FLOWVALVE	# RED/flow-valve (red-penalty-box)
    126 #options 	ALTQ_HFSC	# Hierarchical Fair Service Curve
    127 #options 	ALTQ_LOCALQ	# Local queueing discipline
    128 #options 	ALTQ_PRIQ	# Priority Queueing
    129 #options 	ALTQ_RED	# Random Early Detection
    130 #options 	ALTQ_RIO	# RED with IN/OUT
    131 #options 	ALTQ_WFQ	# Weighted Fair Queueing
    132 
    133 # Work-around for root on slow servers (insurance...)
    134 options 	NFS_BOOT_RWSIZE=1024
    135 options 	NFS_BOOT_BOOTPARAM
    136 
    137 config		netbsd root on ? type ?
    138 
    139 # On-board I/O space (required)
    140 include "arch/sun3/conf/obio.sun3"
    141 
    142 # On-board memory (optional)
    143 # See frame-buffers
    144 obmem0 at mainbus?
    145 
    146 # VME bus support (optional)
    147 # One unit for each address space
    148 vme0 at mainbus? # A16/D16
    149 vme1 at mainbus? # A16/D32
    150 vme2 at mainbus? # A24/D16
    151 vme3 at mainbus? # A24/D32
    152 vme4 at mainbus? # A32/D16
    153 vme5 at mainbus? # A32/D32
    154 
    155 #
    156 # Serial ports
    157 #
    158 zstty0	at zsc1 channel 0	# ttya
    159 zstty1	at zsc1 channel 1	# ttyb
    160 
    161 kbd0	at zsc0 channel 0	# keyboard
    162 ms0	at zsc0 channel 1	# mouse
    163 
    164 #
    165 # Network devices
    166 #
    167 
    168 # Intel Ethernet (onboard, or VME)
    169 ie0 at obio0 addr 0x0C0000 ipl 3
    170 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
    171 
    172 # Lance Ethernet (only onboard)
    173 le0 at obio0 addr 0x120000 ipl 3
    174 
    175 # All Sun3 machines with an "le" (3/50, 3/60) should be
    176 # presumed to have the old, buggy LANCE chip. (Rev. C)
    177 options 	LANCE_REVC_BUG
    178 
    179 #
    180 # Disk and tape devices
    181 #
    182 
    183 # Sun3 "si" SCSI controller (NCR 5380)
    184 # This driver has several flags which may be enabled using
    185 # the "flags" directive.  Valid flags are:
    186 #
    187 # 0x000ff	Set (1<<target) to disable disconnect/reselect
    188 # 0x0ff00	Set (1<<(target+8)) to disable parity checking
    189 # 0x10000	Set this bit to disable DMA interrupts (poll)
    190 # 0x20000	Set this bit to disable DMA entirely (use PIO)
    191 #
    192 # For example: "flags 0x1000f" would disable DMA interrupts,
    193 # and disable disconnect/reselect for targets 0-3
    194 si0 at obio0 addr 0x140000 ipl 2
    195 si0 at vme2 addr 0x200000 ipl 2 vect 0x40
    196 si1 at vme2 addr 0x204000 ipl 2 vect 0x41
    197 
    198 # Xylogics 450/451 controllers (VME A16/D16)
    199 xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
    200 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
    201 xy* at xyc? drive ?
    202 
    203 # Xylogics 7053 controllers (VME A16/D32)
    204 xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
    205 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
    206 xd* at xdc? drive ?
    207 
    208 # Xylogics 472 tape controllers?
    209 
    210 # Sun3/E SCSI+Ethernet board (VME A24/D16)
    211 # Note: the board uses vect and vect+1
    212 sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75
    213 sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77
    214 si* at sebuf?
    215 ie* at sebuf?
    216 
    217 #
    218 # Frame buffer devices
    219 #
    220 
    221 include "arch/sun3/conf/bw2.sun3"
    222 include "arch/sun3/conf/cg4.sun3"
    223 
    224 # 3/60 P4 accelerated 8-bit color frame buffer
    225 # cgsix0 at obmem0 addr 0xff000000
    226 
    227 # 3/60 P4 24-bit color frame buffer
    228 # cgeight0 at obmem0 addr 0xff300000
    229 
    230 # Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).
    231 cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8
    232 
    233 # Support for the CG9 24-bit frame buffer (VME A32/D32).
    234 # cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA
    235 
    236 #
    237 # SCSI infrastructure
    238 #
    239 scsibus* at scsi?
    240 
    241 sd* at scsibus? target ? lun ?		# SCSI disks
    242 st* at scsibus? target ? lun ?		# SCSI tapes
    243 cd* at scsibus? target ? lun ?		# SCSI CD-ROMs
    244 #ch* at scsibus? target ? lun ?		# SCSI changer devices
    245 #ss* at scsibus? target ? lun ?		# SCSI scanners
    246 uk* at scsibus? target ? lun ?		# unknown SCSI devices
    247 
    248 #
    249 # accept filters
    250 #pseudo-device   accf_data		# "dataready" accept filter
    251 #pseudo-device   accf_http		# "httpready" accept filter
    252 
    253 # Memory-disk drivers
    254 pseudo-device	md		
    255 
    256 # Misc.
    257 pseudo-device	loop			# network loopback
    258 pseudo-device	bpfilter		# packet filter
    259 #pseudo-device	carp			# Common Address Redundancy Protocol
    260 pseudo-device	sl			# CSLIP
    261 #pseudo-device	ppp			# PPP
    262 #pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
    263 #pseudo-device	tun			# network tunneling over tty
    264 #pseudo-device	tap			# virtual Ethernet
    265 #pseudo-device	gre			# generic L3 over IP tunnel
    266 #pseudo-device	npf			# NPF packet filter
    267 #pseudo-device	gif			# IPv[46] over IPv[46] tunnel (RFC1933)
    268 #pseudo-device	faith			# IPv[46] tcp relay translation i/f
    269 #pseudo-device	stf			# 6to4 IPv6 over IPv4 encapsulation
    270 #pseudo-device	vlan			# IEEE 802.1q encapsulation
    271 #pseudo-device	bridge			# simple inter-network bridging
    272 #pseudo-device	vether			# Virtual Ethernet for bridge
    273 #pseudo-device	agr			# IEEE 802.3ad link aggregation
    274 
    275 pseudo-device	pty			# pseudo-terminals
    276 #pseudo-device	vnd			# paging to files
    277 #options 	VND_COMPRESSION		# compressed vnd(4)
    278 #pseudo-device	ccd			# concatenated disks
    279 #pseudo-device	cgd			# cryptographic disk devices
    280 #pseudo-device	raid			# RAIDframe disk driver
    281 #options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    282 # Options to enable various other RAIDframe RAID types.
    283 #options 	RF_INCLUDE_EVENODD=1
    284 #options 	RF_INCLUDE_RAID5_RS=1
    285 #options 	RF_INCLUDE_PARITYLOGGING=1
    286 #options 	RF_INCLUDE_CHAINDECLUSTER=1
    287 #options 	RF_INCLUDE_INTERDECLUSTER=1
    288 #options 	RF_INCLUDE_PARITY_DECLUSTERING=1
    289 #options 	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
    290 #pseudo-device	fss			# file system snapshot device
    291 pseudo-device	clockctl		# user control of clock subsystem
    292 pseudo-device	ksyms			# /dev/ksyms
    293 #pseudo-device 	swwdog			# software watchdog timer -- swwdog(4)
    294 
    295 # Veriexec
    296 # include "dev/veriexec.config"
    297 
    298 # Pull in optional local configuration - always at end
    299 cinclude	"arch/sun3/conf/GENERIC.local"
    300