Home | History | Annotate | Line # | Download | only in conf
GENERIC revision 1.38.4.2
      1  1.38.4.2  thorpej #	$NetBSD: GENERIC,v 1.38.4.2 1997/08/27 22:42:48 thorpej Exp $
      2       1.9      gwr 
      3       1.1    glass #
      4      1.21      gwr # GENERIC Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
      5      1.21      gwr # Supports root on: ie0, le0, sd*, ...
      6       1.9      gwr #
      7       1.1    glass 
      8      1.29      jtc include "arch/sun3/conf/std.sun3"
      9       1.1    glass 
     10       1.4      gwr # Machines to be supported by this kernel
     11      1.15      gwr options 	FPU_EMULATE
     12      1.21      gwr options 	HAVECACHE		# Sun3/260 VAC
     13       1.3    glass 
     14       1.4      gwr # Needs to be set per system.  i.e change these as you see fit
     15       1.3    glass maxusers	4
     16      1.23      gwr 
     17       1.4      gwr # Standard system options
     18      1.32      gwr options 	KTRACE			# system call tracing support
     19      1.30  thorpej 
     20      1.30  thorpej # Debugging options.  Uncomment either this:
     21      1.30  thorpej options 	DDB
     22      1.36      gwr # ... or these for KGDB (gdb remote target)
     23      1.36      gwr #makeoptions DEBUG="-g"			# debugging symbols for gdb
     24      1.30  thorpej #options 	KGDB
     25      1.36      gwr #options 	KGDBDEV=0x0C01
     26  1.38.4.2  thorpej #options 	SCSIVERBOSE		# Verbose SCSI errors
     27       1.1    glass 
     28       1.4      gwr # Filesystem options
     29      1.38    lukem file-system	FFS		# ufs file system
     30      1.38    lukem file-system	NFS		# nfs client support
     31      1.38    lukem file-system	CD9660		# ISO 9660 + Rock Ridge file system
     32      1.38    lukem file-system	FDESC		# /dev/fd/*
     33      1.38    lukem file-system	KERNFS		# /kern
     34      1.38    lukem file-system	NULLFS		# loopback file system
     35      1.38    lukem file-system	PROCFS		# /proc
     36      1.38    lukem file-system	UNION		# union file system
     37      1.38    lukem file-system	MFS		# memory-based filesystem
     38      1.35  thorpej 
     39      1.30  thorpej options 	NFSSERVER	# nfs server support
     40      1.27      gwr options 	FIFO		# FIFOs; RECOMMENDED
     41       1.4      gwr 
     42       1.4      gwr # Networking options
     43      1.30  thorpej options 	INET		# IP prototol stack support
     44      1.38    lukem #options 	GATEWAY		# IP packet forwarding
     45      1.30  thorpej options 	TCP_COMPAT_42	# TCP bug compatibility with 4.2BSD
     46      1.37      gwr # XXX - Work-around for root on slow servers (insurance...)
     47      1.12      gwr options 	NFS_BOOT_RWSIZE=1024
     48       1.3    glass 
     49      1.10      gwr # Compatability options
     50      1.24      gwr options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
     51      1.30  thorpej options 	COMPAT_43	# and 4.3BSD and ...
     52      1.30  thorpej options 	COMPAT_10	# NetBSD 1.0
     53      1.30  thorpej options 	COMPAT_11	# NetBSD 1.1
     54      1.30  thorpej options 	COMPAT_12	# NetBSD 1.2
     55      1.27      gwr options 	UCONSOLE	# Allow non-root TIOCCONS
     56       1.3    glass 
     57       1.4      gwr # Sun3-specific debugging options
     58      1.37      gwr #options 	PMAP_DEBUG
     59       1.3    glass #options 	VMFAULT_TRACE
     60       1.4      gwr #options 	SYSCALL_DEBUG
     61      1.25      gwr #options 	EXEC_DEBUG
     62       1.7      gwr options 	DIAGNOSTIC
     63      1.26      gwr #options 	SCSIDEBUG
     64       1.3    glass 
     65      1.35  thorpej config		netbsd root on ? type ?
     66       1.1    glass 
     67      1.25      gwr #
     68      1.27      gwr # Serial ports
     69      1.27      gwr #
     70      1.38    lukem zstty0	at zsc1 channel 0	# ttya
     71      1.38    lukem zstty1	at zsc1 channel 1	# ttyb
     72      1.27      gwr 
     73      1.38    lukem kbd0	at zsc0 channel 0	# keyboard
     74      1.38    lukem ms0	at zsc0 channel 1	# mouse
     75      1.27      gwr 
     76      1.27      gwr #
     77      1.25      gwr # Network devices
     78      1.25      gwr #
     79      1.16      gwr 
     80      1.25      gwr # Intel Ethernet (onboard, or VME)
     81      1.31      gwr ie0 at obio0 addr   0x0C0000 level 3
     82      1.12      gwr ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75
     83       1.4      gwr 
     84      1.25      gwr # Lance Ethernet (only onboard)
     85      1.31      gwr le0 at obio0 addr   0x120000 level 3
     86      1.12      gwr 
     87      1.25      gwr #
     88      1.25      gwr # Disk and tape devices
     89      1.25      gwr #
     90      1.25      gwr 
     91      1.25      gwr # Sun3 "si" SCSI controller (NCR 5380)
     92      1.37      gwr # This driver has several flags which may be enabled using
     93      1.37      gwr # the "flags" directive.  Valid flags are:
     94      1.31      gwr #
     95      1.37      gwr # 0x000ff	Set (1<<target) to disable disconnect/reselect
     96      1.37      gwr # 0x0ff00	Set (1<<(target+8)) to disable parity checking
     97      1.37      gwr # 0x10000	Set this bit to disable DMA interrupts (poll)
     98      1.37      gwr # 0x20000	Set this bit to disable DMA entirely (use PIO)
     99      1.37      gwr #
    100      1.37      gwr # For example: "flags 0x1000f" would disable DMA interrupts,
    101      1.37      gwr # and disable disconnect/reselect for targets 0-3
    102      1.31      gwr si0 at obio0 addr   0x140000 level 2
    103      1.27      gwr si0 at vmes0 addr 0xff200000 level 2 vect 0x40
    104      1.27      gwr si1 at vmes0 addr 0xff204000 level 2 vect 0x41
    105      1.25      gwr 
    106      1.37      gwr # Xylogics 450/451 controllers
    107      1.37      gwr # xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
    108      1.37      gwr # xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
    109      1.37      gwr # Just wire-down the units so bootdev match is easy.
    110      1.37      gwr # xy0 at xyc0 drive 0
    111      1.37      gwr # xy1 at xyc0 drive 1
    112      1.37      gwr # xy2 at xyc1 drive 0
    113      1.37      gwr # xy3 at xyc1 drive 1
    114      1.37      gwr 
    115      1.25      gwr # Xylogics 7053 controllers
    116      1.25      gwr # xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
    117      1.25      gwr # xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
    118      1.37      gwr # Just wire-down the units so bootdev match is easy.
    119      1.37      gwr # xd0 at xdc0 drive 0
    120      1.37      gwr # xd1 at xdc0 drive 1
    121      1.37      gwr # xd2 at xdc1 drive 0
    122      1.37      gwr # xd3 at xdc1 drive 1
    123      1.25      gwr 
    124      1.25      gwr # Xylogics 472 tape controllers?
    125      1.25      gwr 
    126      1.25      gwr #
    127      1.25      gwr # Frame buffer devices
    128      1.25      gwr #
    129      1.10      gwr 
    130      1.25      gwr # The default cgfour address depends on the machine:
    131      1.27      gwr # 3/60: obmem 0xFF200000 .. 0xFF9fffff
    132      1.25      gwr # 3/110: different? (not tested)
    133      1.25      gwr cgfour0 at obmem0 addr ?
    134      1.25      gwr 
    135      1.25      gwr # 3/60 P4 accelerated 8-bit color frame buffer
    136      1.25      gwr # cgsix0 at obmem0 addr ?
    137      1.25      gwr 
    138      1.25      gwr # 3/60 P4 24-bit color frame buffer
    139      1.25      gwr # cgeight0 at obmem0 addr ?
    140      1.25      gwr 
    141      1.25      gwr # The default bwtwo address depends on the machine:
    142      1.27      gwr # 3/50: obmem   0x100000
    143      1.27      gwr # else: obmem 0xff000000
    144      1.25      gwr bwtwo0 at obmem0 addr ?
    145      1.25      gwr # 3/60 P4 color frame buffer overlay plane, or P4 monochrome frame buffer
    146      1.25      gwr #bwtwo1 at obmem0 addr 0xff300000
    147      1.25      gwr # 3/60 plug-in color frame buffer overlay plane
    148      1.25      gwr #bwtwo1 at obmem0 addr 0xff400000
    149      1.25      gwr 
    150      1.25      gwr # Sun-3 color board, or CG5 8-bit VME frame buffer.
    151      1.25      gwr cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
    152      1.25      gwr 
    153      1.25      gwr # Support for the CG9 24-bit VME frame buffer.
    154      1.25      gwr # cgnine0 at vmel0 addr 0x08000000
    155      1.25      gwr 
    156      1.25      gwr #
    157      1.25      gwr # SCSI infrastructure
    158      1.25      gwr #
    159       1.7      gwr scsibus* at scsi?
    160      1.14      gwr 
    161      1.37      gwr sd* at scsibus? target ? lun ?		# SCSI disks
    162      1.37      gwr st* at scsibus? target ? lun ?		# SCSI tapes
    163      1.37      gwr cd* at scsibus? target ? lun ?		# SCSI CD-ROMs
    164      1.37      gwr ch* at scsibus? target ? lun ?		# SCSI changer devices
    165      1.37      gwr ss* at scsibus? target ? lun ?		# SCSI scanners
    166      1.37      gwr uk* at scsibus? target ? lun ?		# unknown SCSI devices
    167      1.24      gwr 
    168      1.33       pk # Memory-disk drivers
    169      1.38    lukem pseudo-device	md		2
    170       1.1    glass 
    171      1.25      gwr # Misc.
    172      1.38    lukem pseudo-device	loop		1	# network loopback
    173      1.38    lukem pseudo-device	bpfilter	8	# packet filter
    174      1.38    lukem pseudo-device	sl		2	# CSLIP
    175      1.38    lukem pseudo-device	ppp		2	# PPP
    176      1.38    lukem pseudo-device	tun		2	# network tunneling over tty
    177      1.37      gwr #pseudo-device	ipfilter		# ip filter
    178      1.17      gwr 
    179      1.38    lukem pseudo-device	pty		64	# pseudo-terminals
    180      1.38    lukem #pseudo-device	vnd		4	# paging to files
    181      1.38    lukem #pseudo-device	ccd		4	# concatenated disks
    182