GENERIC revision 1.177
1# $NetBSD: GENERIC,v 1.177 2018/03/03 03:19:36 mrg Exp $ 2# 3# GENERIC machine description file 4# 5# This machine description file is used to generate the default NetBSD 6# kernel. The generic kernel does not include all options, subsystems 7# and device drivers, but should be useful for most applications. 8# 9# The machine description file can be customised for your specific 10# machine to reduce the kernel size and improve its performance. 11# 12# For further information on compiling NetBSD kernels, see the config(8) 13# man page. 14# 15# For further information on hardware support for this architecture, see 16# the intro(4) man page. For further information about kernel options 17# for this architecture, see the options(4) man page. For an explanation 18# of each device driver in this file see the section 4 man page for the 19# device. 20 21# Supports Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E) 22# Supports root on: ie0, le0, sd*, ... 23 24include "arch/sun3/conf/std.sun3" 25 26#options INCLUDE_CONFIG_FILE # embed config file in kernel binary 27 28#ident "GENERIC-$Revision: 1.177 $" 29 30makeoptions COPTS="-Os" # bootloader has size limit (~2MB) 31 32# Machines to be supported by this kernel 33options FPU_EMULATE 34options HAVECACHE # Sun3/260 VAC 35 36# Needs to be set per system. i.e change these as you see fit 37maxusers 4 38 39# Standard system options 40options KTRACE # system call tracing 41options SYSVMSG # System V message queues 42options SYSVSEM # System V semaphores 43options SYSVSHM # System V shared memory 44 45#options MODULAR # new style module(7) framework 46#options MODULAR_DEFAULT_AUTOLOAD 47 48#options INSECURE # disable kernel security level 49#options USERCONF # userconf(4) support 50options PIPE_SOCKETPAIR # smaller, but slower pipe(2) 51options SYSCTL_INCLUDE_DESCR # Include sysctl descriptions in kernel 52 53# Alternate buffer queue strategies for better responsiveness under high 54# disk I/O load. 55#options BUFQ_READPRIO 56#options BUFQ_PRIOCSCAN 57 58# Which kernel debugger? Uncomment either this: 59options DDB 60# ... or these for KGDB (gdb remote target) 61#makeoptions DEBUG="-g" # debugging symbols for gdb 62#options KGDB 63#options KGDB_DEV=0x0C01 # ttya=0C00 ttyb=0C01 64 65# Other debugging options 66options DDB_HISTORY_SIZE=512 # enable history editing in DDB 67#options DEBUG # kernel debugging code 68#options DIAGNOSTIC # extra kernel sanity checking 69#options PMAP_DEBUG 70#options SCSIDEBUG 71#options SCSIVERBOSE # Verbose SCSI errors 72 73# Compatibility options 74# Originally in NetBSD 1.0, but limited to 6.0 for size. 75#include "conf/compat_netbsd10.config" 76include "conf/compat_netbsd60.config" 77 78#options COMPAT_SUNOS # can run SunOS 4.1.1 executables 79#options COMPAT_SVR4 # can run SVR4 executables 80#options COMPAT_AOUT_M68K # support for NetBSD a.out executables 81#options COMPAT_LINUX # can run Linux/m68k executables 82#options EXEC_AOUT # support for a.out executables 83 84# Filesystem options 85file-system FFS # Berkeley Fast Filesystem 86file-system NFS # Sun NFS client support 87file-system CD9660 # ISO 9660 + Rock Ridge file system 88#file-system FDESC # /dev/fd/* 89#file-system KERNFS # /kern 90file-system NULLFS # loopback file system 91#file-system OVERLAY # overlay file system 92file-system PROCFS # /proc 93#file-system UNION # union file system 94file-system MFS # memory-based filesystem 95file-system PTYFS # /dev/pts/N support 96# Disabled as 20KB larger than MFS. 97#file-system TMPFS # Efficient memory file-system 98#file-system UDF # experimental - OSTA UDF CD/DVD file-system 99 100#options NFSSERVER # nfs server support 101#options QUOTA # legacy UFS quotas 102#options QUOTA2 # new, in-filesystem UFS quotas 103#options FFS_EI # FFS Endian Independent support 104#options WAPBL # File system journaling support 105#options UFS_DIRHASH # UFS Large Directory Hashing - Experimental 106options FFS_NO_SNAPSHOT # No FFS snapshot support 107#options UFS_EXTATTR # Extended attribute support for UFS1 108 109# Networking options 110options INET # IP protocol stack support 111#options INET6 # IPV6 112#options IPSEC # IP security 113#options IPSEC_DEBUG # debug for IP security 114#options GATEWAY # IP packet forwarding 115#options TCP_DEBUG # Record last TCP_NDEBUG packets with SO_DEBUG 116 117#options ALTQ # Manipulate network interfaces' output queues 118#options ALTQ_BLUE # Stochastic Fair Blue 119#options ALTQ_CBQ # Class-Based Queueing 120#options ALTQ_CDNR # Diffserv Traffic Conditioner 121#options ALTQ_FIFOQ # First-In First-Out Queue 122#options ALTQ_FLOWVALVE # RED/flow-valve (red-penalty-box) 123#options ALTQ_HFSC # Hierarchical Fair Service Curve 124#options ALTQ_LOCALQ # Local queueing discipline 125#options ALTQ_PRIQ # Priority Queueing 126#options ALTQ_RED # Random Early Detection 127#options ALTQ_RIO # RED with IN/OUT 128#options ALTQ_WFQ # Weighted Fair Queueing 129 130# Work-around for root on slow servers (insurance...) 131options NFS_BOOT_RWSIZE=1024 132options NFS_BOOT_BOOTPARAM 133 134config netbsd root on ? type ? 135 136# On-board I/O space (required) 137include "arch/sun3/conf/obio.sun3" 138 139# On-board memory (optional) 140# See frame-buffers 141obmem0 at mainbus? 142 143# VME bus support (optional) 144# One unit for each address space 145vme0 at mainbus? # A16/D16 146vme1 at mainbus? # A16/D32 147vme2 at mainbus? # A24/D16 148vme3 at mainbus? # A24/D32 149vme4 at mainbus? # A32/D16 150vme5 at mainbus? # A32/D32 151 152# 153# Serial ports 154# 155zstty0 at zsc1 channel 0 # ttya 156zstty1 at zsc1 channel 1 # ttyb 157 158kbd0 at zsc0 channel 0 # keyboard 159ms0 at zsc0 channel 1 # mouse 160 161# 162# Network devices 163# 164 165# Intel Ethernet (onboard, or VME) 166ie0 at obio0 addr 0x0C0000 ipl 3 167ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 168 169# Lance Ethernet (only onboard) 170le0 at obio0 addr 0x120000 ipl 3 171 172# All Sun3 machines with an "le" (3/50, 3/60) should be 173# presumed to have the old, buggy LANCE chip. (Rev. C) 174options LANCE_REVC_BUG 175 176# 177# Disk and tape devices 178# 179 180# Sun3 "si" SCSI controller (NCR 5380) 181# This driver has several flags which may be enabled using 182# the "flags" directive. Valid flags are: 183# 184# 0x000ff Set (1<<target) to disable disconnect/reselect 185# 0x0ff00 Set (1<<(target+8)) to disable parity checking 186# 0x10000 Set this bit to disable DMA interrupts (poll) 187# 0x20000 Set this bit to disable DMA entirely (use PIO) 188# 189# For example: "flags 0x1000f" would disable DMA interrupts, 190# and disable disconnect/reselect for targets 0-3 191si0 at obio0 addr 0x140000 ipl 2 192si0 at vme2 addr 0x200000 ipl 2 vect 0x40 193si1 at vme2 addr 0x204000 ipl 2 vect 0x41 194 195# Xylogics 450/451 controllers (VME A16/D16) 196xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 197xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 198xy* at xyc? drive ? 199 200# Xylogics 7053 controllers (VME A16/D32) 201xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 202xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 203xd* at xdc? drive ? 204 205# Xylogics 472 tape controllers? 206 207# Sun3/E SCSI+Ethernet board (VME A24/D16) 208# Note: the board uses vect and vect+1 209sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 210sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 211si* at sebuf? 212ie* at sebuf? 213 214# 215# Frame buffer devices 216# 217 218include "arch/sun3/conf/bw2.sun3" 219include "arch/sun3/conf/cg4.sun3" 220 221# 3/60 P4 accelerated 8-bit color frame buffer 222# cgsix0 at obmem0 addr 0xff000000 223 224# 3/60 P4 24-bit color frame buffer 225# cgeight0 at obmem0 addr 0xff300000 226 227# Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16). 228cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8 229 230# Support for the CG9 24-bit frame buffer (VME A32/D32). 231# cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA 232 233# 234# SCSI infrastructure 235# 236scsibus* at scsi? 237 238sd* at scsibus? target ? lun ? # SCSI disks 239st* at scsibus? target ? lun ? # SCSI tapes 240cd* at scsibus? target ? lun ? # SCSI CD-ROMs 241#ch* at scsibus? target ? lun ? # SCSI changer devices 242#ss* at scsibus? target ? lun ? # SCSI scanners 243uk* at scsibus? target ? lun ? # unknown SCSI devices 244 245# 246# accept filters 247#pseudo-device accf_data # "dataready" accept filter 248#pseudo-device accf_http # "httpready" accept filter 249 250# Memory-disk drivers 251pseudo-device md 252 253# Misc. 254pseudo-device loop # network loopback 255pseudo-device bpfilter # packet filter 256#pseudo-device carp # Common Address Redundancy Protocol 257pseudo-device sl # CSLIP 258pseudo-device ppp # PPP 259#pseudo-device pppoe # PPP over Ethernet (RFC 2516) 260#pseudo-device tun # network tunneling over tty 261#pseudo-device tap # virtual Ethernet 262#pseudo-device gre # generic L3 over IP tunnel 263#pseudo-device ipfilter # ip filter 264#pseudo-device gif # IPv[46] over IPv[46] tunnel (RFC1933) 265#pseudo-device faith # IPv[46] tcp relay translation i/f 266#pseudo-device stf # 6to4 IPv6 over IPv4 encapsulation 267pseudo-device vlan # IEEE 802.1q encapsulation 268#pseudo-device bridge # simple inter-network bridging 269#options BRIDGE_IPF # bridge uses IP/IPv6 pfil hooks too 270#pseudo-device agr # IEEE 802.3ad link aggregation 271 272pseudo-device pty # pseudo-terminals 273pseudo-device vnd # paging to files 274#options VND_COMPRESSION # compressed vnd(4) 275#pseudo-device ccd # concatenated disks 276#pseudo-device cgd # cryptographic disk devices 277#pseudo-device raid # RAIDframe disk driver 278#options RAID_AUTOCONFIG # auto-configuration of RAID components 279# Options to enable various other RAIDframe RAID types. 280#options RF_INCLUDE_EVENODD=1 281#options RF_INCLUDE_RAID5_RS=1 282#options RF_INCLUDE_PARITYLOGGING=1 283#options RF_INCLUDE_CHAINDECLUSTER=1 284#options RF_INCLUDE_INTERDECLUSTER=1 285#options RF_INCLUDE_PARITY_DECLUSTERING=1 286#options RF_INCLUDE_PARITY_DECLUSTERING_DS=1 287#pseudo-device fss # file system snapshot device 288pseudo-device clockctl # user control of clock subsystem 289pseudo-device ksyms # /dev/ksyms 290#pseudo-device pf # PF packet filter 291#pseudo-device pflog # PF log if 292 293# Veriexec 294# 295# a pseudo device needed for veriexec 296#pseudo-device veriexec 297# 298# Uncomment the fingerprint methods below that are desired. Note that 299# removing fingerprint methods will have almost no impact on the kernel 300# code size. 301# 302#options VERIFIED_EXEC_FP_SHA256 303#options VERIFIED_EXEC_FP_SHA384 304#options VERIFIED_EXEC_FP_SHA512 305