GENERIC revision 1.41 1 # $NetBSD: GENERIC,v 1.41 1997/10/17 02:59:05 gwr Exp $
2
3 # GENERIC Sun3 (3/50, 3/60, 3/110, 3/160, 3/260)
4 # Supports root on: ie0, le0, sd*, ...
5
6 include "arch/sun3/conf/std.sun3"
7
8 # Machines to be supported by this kernel
9 options FPU_EMULATE
10 options HAVECACHE # Sun3/260 VAC
11
12 # Needs to be set per system. i.e change these as you see fit
13 maxusers 4
14
15 # Standard system options
16 options KTRACE # system call tracing
17 options SYSVMSG # System V message queues
18 options SYSVSEM # System V semaphores
19 options SYSVSHM # System V shared memory
20 #options SHMMAXPGS=1024 # 1024 pages is the default
21 #options LKM # loadable kernel modules
22 #options INSECURE # disable kernel security level
23 #options UCONSOLE # Allow non-root TIOCCONS
24
25 # Which kernel debugger? Uncomment either this:
26 options DDB
27 # ... or these for KGDB (gdb remote target)
28 #makeoptions DEBUG="-g" # debugging symbols for gdb
29 #options KGDB
30 #options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01
31
32 # Other debugging options
33 #options DEBUG # kernel debugging code
34 #options DIAGNOSTIC # extra kernel sanity checking
35 #options KMEMSTATS # kernel memory statistics (vmstat -m)
36 #options PMAP_DEBUG
37 #options SCSIDEBUG
38 #options SCSIVERBOSE # Verbose SCSI errors
39
40 # Compatability options
41 options COMPAT_SUNOS # can run SunOS 4.1.1 executables
42 options COMPAT_43 # and 4.3BSD and ...
43 options COMPAT_10 # NetBSD 1.0
44 options COMPAT_11 # NetBSD 1.1
45 options COMPAT_12 # NetBSD 1.2
46
47 # Filesystem options
48 file-system FFS # Berkeley Fast Filesystem
49 file-system NFS # Sun NFS client support
50 file-system CD9660 # ISO 9660 + Rock Ridge file system
51 file-system FDESC # /dev/fd/*
52 file-system KERNFS # /kern
53 file-system NULLFS # loopback file system
54 file-system PROCFS # /proc
55 file-system UNION # union file system
56 file-system MFS # memory-based filesystem
57
58 options FIFO # FIFOs; RECOMMENDED
59 options NFSSERVER # nfs server support
60 options QUOTA # FFS quotas
61
62 # Networking options
63 options INET # IP prototol stack support
64 options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP
65 #options GATEWAY # IP packet forwarding
66 #options ISO,TPIP # OSI networking
67 #options EON # OSI tunneling over IP
68 #options CCITT,LLC,HDLC # X.25
69 #options PFIL_HOOKS # pfil(9) packet filter hooks.
70
71 # Work-around for root on slow servers (insurance...)
72 options NFS_BOOT_RWSIZE=1024
73
74 config netbsd root on ? type ?
75
76 #
77 # Serial ports
78 #
79 zstty0 at zsc1 channel 0 # ttya
80 zstty1 at zsc1 channel 1 # ttyb
81
82 kbd0 at zsc0 channel 0 # keyboard
83 ms0 at zsc0 channel 1 # mouse
84
85 #
86 # Network devices
87 #
88
89 # Intel Ethernet (onboard, or VME)
90 ie0 at obio0 addr 0x0C0000 level 3
91 ie1 at vmes0 addr 0xffe88000 level 3 vect 0x75
92
93 # Lance Ethernet (only onboard)
94 le0 at obio0 addr 0x120000 level 3
95
96 #
97 # Disk and tape devices
98 #
99
100 # Sun3 "si" SCSI controller (NCR 5380)
101 # This driver has several flags which may be enabled using
102 # the "flags" directive. Valid flags are:
103 #
104 # 0x000ff Set (1<<target) to disable disconnect/reselect
105 # 0x0ff00 Set (1<<(target+8)) to disable parity checking
106 # 0x10000 Set this bit to disable DMA interrupts (poll)
107 # 0x20000 Set this bit to disable DMA entirely (use PIO)
108 #
109 # For example: "flags 0x1000f" would disable DMA interrupts,
110 # and disable disconnect/reselect for targets 0-3
111 # XXX: Disable disconnect/reselect on disks for now...
112 # XXX: Disable DMA interrupts for now on the obio...
113 si0 at obio0 addr 0x140000 level 2 flags 0x1000f
114 si0 at vmes0 addr 0xff200000 level 2 vect 0x40 flags 0xf
115 si1 at vmes0 addr 0xff204000 level 2 vect 0x41 flags 0xf
116
117 # Xylogics 450/451 controllers
118 xyc0 at vmes0 addr 0xffffee40 level 2 vect 0x48
119 xyc1 at vmes0 addr 0xffffee48 level 2 vect 0x49
120 xy* at xyc? drive ?
121
122 # Xylogics 7053 controllers
123 xdc0 at vmel0 addr 0xffffee80 level 2 vect 0x44
124 xdc1 at vmel0 addr 0xffffee90 level 2 vect 0x45
125 xd* at xdc? drive ?
126
127 # Xylogics 472 tape controllers?
128
129 #
130 # Frame buffer devices
131 #
132
133 # The default cgfour address depends on the machine:
134 # 3/60: obmem 0xFF200000 .. 0xFF9fffff
135 # 3/110: different? (not tested)
136 cgfour0 at obmem0 addr ?
137
138 # 3/60 P4 accelerated 8-bit color frame buffer
139 # cgsix0 at obmem0 addr ?
140
141 # 3/60 P4 24-bit color frame buffer
142 # cgeight0 at obmem0 addr ?
143
144 # The default bwtwo address depends on the machine:
145 # 3/50: obmem 0x100000
146 # else: obmem 0xff000000
147 bwtwo0 at obmem0 addr ?
148 # 3/60 P4 color frame buffer overlay plane, or P4 monochrome frame buffer
149 #bwtwo1 at obmem0 addr 0xff300000
150 # 3/60 plug-in color frame buffer overlay plane
151 #bwtwo1 at obmem0 addr 0xff400000
152
153 # Sun-3 color board, or CG5 8-bit VME frame buffer.
154 cgtwo0 at vmes0 addr 0xff400000 level 4 vect 0xA8
155
156 # Support for the CG9 24-bit VME frame buffer.
157 # cgnine0 at vmel0 addr 0x08000000
158
159 #
160 # Sun3/E stuff
161 #
162 sebuf0 at vmes0 addr 0xff300000 level 2 vect 0x74
163 sebuf1 at vmes0 addr 0xff340000 level 2 vect 0x76
164 si* at sebuf?
165 ie* at sebuf?
166
167 #
168 # SCSI infrastructure
169 #
170 scsibus* at scsi?
171
172 sd* at scsibus? target ? lun ? # SCSI disks
173 st* at scsibus? target ? lun ? # SCSI tapes
174 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
175 ch* at scsibus? target ? lun ? # SCSI changer devices
176 ss* at scsibus? target ? lun ? # SCSI scanners
177 uk* at scsibus? target ? lun ? # unknown SCSI devices
178
179 # Memory-disk drivers
180 pseudo-device md 2
181
182 # Misc.
183 pseudo-device loop 1 # network loopback
184 pseudo-device bpfilter 8 # packet filter
185 pseudo-device sl 2 # CSLIP
186 pseudo-device ppp 2 # PPP
187 pseudo-device tun 2 # network tunneling over tty
188 #pseudo-device ipfilter # ip filter
189
190 pseudo-device pty 64 # pseudo-terminals
191 #pseudo-device vnd 4 # paging to files
192 #pseudo-device ccd 4 # concatenated disks
193