GENERIC revision 1.61 1 # $NetBSD: GENERIC,v 1.61 1999/11/21 14:00:44 itojun Exp $
2
3 # GENERIC Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E)
4 # Supports root on: ie0, le0, sd*, ...
5
6 include "arch/sun3/conf/std.sun3"
7
8 # Machines to be supported by this kernel
9 options FPU_EMULATE
10 options HAVECACHE # Sun3/260 VAC
11
12 # Needs to be set per system. i.e change these as you see fit
13 maxusers 4
14
15 # Standard system options
16 options KTRACE # system call tracing
17 options SYSVMSG # System V message queues
18 options SYSVSEM # System V semaphores
19 options SYSVSHM # System V shared memory
20 #options SHMMAXPGS=1024 # 1024 pages is the default
21 options LKM # loadable kernel modules
22 #options INSECURE # disable kernel security level
23 #options UCONSOLE # Allow non-root TIOCCONS
24
25 # Which kernel debugger? Uncomment either this:
26 options DDB
27 # ... or these for KGDB (gdb remote target)
28 #makeoptions DEBUG="-g" # debugging symbols for gdb
29 #options KGDB
30 #options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01
31
32 # Other debugging options
33 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB
34 #options DEBUG # kernel debugging code
35 #options DIAGNOSTIC # extra kernel sanity checking
36 #options KMEMSTATS # kernel memory statistics (vmstat -m)
37 #options PMAP_DEBUG
38 #options SCSIDEBUG
39 #options SCSIVERBOSE # Verbose SCSI errors
40
41 # Compatability options
42 options COMPAT_SUNOS # can run SunOS 4.1.1 executables
43 #options COMPAT_SVR4 # can run SVR4 executables
44 options COMPAT_43 # and 4.3BSD and ...
45 options COMPAT_10 # NetBSD 1.0
46 options COMPAT_11 # NetBSD 1.1
47 options COMPAT_12 # NetBSD 1.2
48 options COMPAT_13 # NetBSD 1.3
49 options COMPAT_14 # NetBSD 1.4
50 #options COMPAT_LINUX # can run Linux/m68k executables
51 #options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4)
52
53 # Filesystem options
54 file-system FFS # Berkeley Fast Filesystem
55 file-system NFS # Sun NFS client support
56 file-system CD9660 # ISO 9660 + Rock Ridge file system
57 file-system FDESC # /dev/fd/*
58 file-system KERNFS # /kern
59 file-system NULLFS # loopback file system
60 file-system PROCFS # /proc
61 file-system UNION # union file system
62 file-system MFS # memory-based filesystem
63
64 options NFSSERVER # nfs server support
65 options QUOTA # FFS quotas
66 #options FFS_EI # FFS Endian Independant support
67 #options SOFTDEP # FFS soft updates support.
68
69 # Pull in config fragments for kernel crypto. This is required for
70 # options IPSEC etc. to work. If you want to run with IPSEC, uncomment
71 # one of these, based on whether you use crypto-us or crypto-intl, and
72 # adjust the prefixes as necessary.
73
74 #prefix ../crypto-us/sys
75 #cinclude "conf/files.crypto-us"
76 #prefix
77
78 #prefix ../crypto-intl/sys
79 #cinclude "conf/files.crypto-intl"
80 #prefix
81
82 # Networking options
83 options INET # IP prototol stack support
84 options INET6 # IPV6
85 #options IPSEC # IP security
86 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC)
87 #options IPSEC_DEBUG # debug for IP security
88 options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP
89 #options GATEWAY # IP packet forwarding
90 #options ISO,TPIP # OSI networking
91 #options EON # OSI tunneling over IP
92 #options CCITT,LLC,HDLC # X.25
93 options PFIL_HOOKS # pfil(9) packet filter hooks.
94
95 # Work-around for root on slow servers (insurance...)
96 options NFS_BOOT_RWSIZE=1024
97 options NFS_BOOT_BOOTPARAM
98
99 config netbsd root on ? type ?
100
101 # On-board I/O space (required)
102 include "arch/sun3/conf/obio.sun3"
103
104 # On-board memory (optional)
105 # See frame-buffers
106 obmem0 at mainbus?
107
108 # VME bus support (optional)
109 # One unit for each address space
110 vme0 at mainbus? # A16/D16
111 vme1 at mainbus? # A16/D32
112 vme2 at mainbus? # A24/D16
113 vme3 at mainbus? # A24/D32
114 vme4 at mainbus? # A32/D16
115 vme5 at mainbus? # A32/D32
116
117 #
118 # Serial ports
119 #
120 zstty0 at zsc1 channel 0 # ttya
121 zstty1 at zsc1 channel 1 # ttyb
122
123 kbd0 at zsc0 channel 0 # keyboard
124 ms0 at zsc0 channel 1 # mouse
125
126 #
127 # Network devices
128 #
129
130 # Intel Ethernet (onboard, or VME)
131 ie0 at obio0 addr 0x0C0000 ipl 3
132 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
133
134 # Lance Ethernet (only onboard)
135 le0 at obio0 addr 0x120000 ipl 3
136
137 # All Sun3 machines with an "le" (3/50, 3/60) should be
138 # presumed to have the old, buggy LANCE chip. (Rev. C)
139 options LANCE_REVC_BUG
140
141 #
142 # Disk and tape devices
143 #
144
145 # Sun3 "si" SCSI controller (NCR 5380)
146 # This driver has several flags which may be enabled using
147 # the "flags" directive. Valid flags are:
148 #
149 # 0x000ff Set (1<<target) to disable disconnect/reselect
150 # 0x0ff00 Set (1<<(target+8)) to disable parity checking
151 # 0x10000 Set this bit to disable DMA interrupts (poll)
152 # 0x20000 Set this bit to disable DMA entirely (use PIO)
153 #
154 # For example: "flags 0x1000f" would disable DMA interrupts,
155 # and disable disconnect/reselect for targets 0-3
156 si0 at obio0 addr 0x140000 ipl 2
157 si0 at vme2 addr 0x200000 ipl 2 vect 0x40
158 si1 at vme2 addr 0x204000 ipl 2 vect 0x41
159
160 # Xylogics 450/451 controllers (VME A16/D16)
161 xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
162 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
163 xy* at xyc? drive ?
164
165 # Xylogics 7053 controllers (VME A16/D32)
166 xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
167 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
168 xd* at xdc? drive ?
169
170 # Xylogics 472 tape controllers?
171
172 # Sun3/E SCSI+Ethernet board (VME A24/D16)
173 # Note: the board uses vect and vect+1
174 sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75
175 sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77
176 si* at sebuf?
177 ie* at sebuf?
178
179 #
180 # Frame buffer devices
181 #
182
183 include "arch/sun3/conf/bw2.sun3"
184 include "arch/sun3/conf/cg4.sun3"
185
186 # 3/60 P4 accelerated 8-bit color frame buffer
187 # cgsix0 at obmem0 addr 0xff000000
188
189 # 3/60 P4 24-bit color frame buffer
190 # cgeight0 at obmem0 addr 0xff300000
191
192 # Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).
193 cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8
194
195 # Support for the CG9 24-bit frame buffer (VME A32/D32).
196 # cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA
197
198 #
199 # SCSI infrastructure
200 #
201 scsibus* at scsi?
202
203 sd* at scsibus? target ? lun ? # SCSI disks
204 st* at scsibus? target ? lun ? # SCSI tapes
205 cd* at scsibus? target ? lun ? # SCSI CD-ROMs
206 ch* at scsibus? target ? lun ? # SCSI changer devices
207 ss* at scsibus? target ? lun ? # SCSI scanners
208 uk* at scsibus? target ? lun ? # unknown SCSI devices
209
210 # Memory-disk drivers
211 pseudo-device md 2
212
213 # Misc.
214 pseudo-device loop 1 # network loopback
215 pseudo-device bpfilter 8 # packet filter
216 pseudo-device sl 2 # CSLIP
217 pseudo-device ppp 2 # PPP
218 pseudo-device tun 2 # network tunneling over tty
219 #pseudo-device gre 2 # generic L3 over IP tunnel
220 #pseudo-device ipfilter # ip filter
221 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933)
222 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f
223 # rnd is EXPERIMENTAL
224 #pseudo-device rnd # /dev/random and in-kernel generator
225
226 pseudo-device pty 32 # pseudo-terminals
227 #pseudo-device vnd 4 # paging to files
228 #pseudo-device ccd 4 # concatenated disks
229 #pseudo-device raid 4 # RAIDframe disk driver
230