GENERIC revision 1.62
1 # $NetBSD: GENERIC,v 1.62 2000/01/20 19:12:36 wrstuden Exp $ 2 3 # GENERIC Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E) 4 # Supports root on: ie0, le0, sd*, ... 5 6 include "arch/sun3/conf/std.sun3" 7 8 # Machines to be supported by this kernel 9 options FPU_EMULATE 10 options HAVECACHE # Sun3/260 VAC 11 12 # Needs to be set per system. i.e change these as you see fit 13 maxusers 4 14 15 # Standard system options 16 options KTRACE # system call tracing 17 options SYSVMSG # System V message queues 18 options SYSVSEM # System V semaphores 19 options SYSVSHM # System V shared memory 20 #options SHMMAXPGS=1024 # 1024 pages is the default 21 options LKM # loadable kernel modules 22 #options INSECURE # disable kernel security level 23 #options UCONSOLE # Allow non-root TIOCCONS 24 25 # Which kernel debugger? Uncomment either this: 26 options DDB 27 # ... or these for KGDB (gdb remote target) 28 #makeoptions DEBUG="-g" # debugging symbols for gdb 29 #options KGDB 30 #options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01 31 32 # Other debugging options 33 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 34 #options DEBUG # kernel debugging code 35 #options DIAGNOSTIC # extra kernel sanity checking 36 #options KMEMSTATS # kernel memory statistics (vmstat -m) 37 #options PMAP_DEBUG 38 #options SCSIDEBUG 39 #options SCSIVERBOSE # Verbose SCSI errors 40 41 # Compatability options 42 options COMPAT_SUNOS # can run SunOS 4.1.1 executables 43 #options COMPAT_SVR4 # can run SVR4 executables 44 options COMPAT_43 # and 4.3BSD and ... 45 options COMPAT_10 # NetBSD 1.0 46 options COMPAT_11 # NetBSD 1.1 47 options COMPAT_12 # NetBSD 1.2 48 options COMPAT_13 # NetBSD 1.3 49 options COMPAT_14 # NetBSD 1.4 50 #options COMPAT_LINUX # can run Linux/m68k executables 51 #options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 52 53 # Filesystem options 54 file-system FFS # Berkeley Fast Filesystem 55 file-system NFS # Sun NFS client support 56 file-system CD9660 # ISO 9660 + Rock Ridge file system 57 file-system FDESC # /dev/fd/* 58 file-system KERNFS # /kern 59 file-system NULLFS # loopback file system 60 file-system OVERLAY # overlay file system 61 file-system PROCFS # /proc 62 file-system UNION # union file system 63 file-system MFS # memory-based filesystem 64 65 options NFSSERVER # nfs server support 66 options QUOTA # FFS quotas 67 #options FFS_EI # FFS Endian Independant support 68 #options SOFTDEP # FFS soft updates support. 69 70 # Pull in config fragments for kernel crypto. This is required for 71 # options IPSEC etc. to work. If you want to run with IPSEC, uncomment 72 # one of these, based on whether you use crypto-us or crypto-intl, and 73 # adjust the prefixes as necessary. 74 75 #prefix ../crypto-us/sys 76 #cinclude "conf/files.crypto-us" 77 #prefix 78 79 #prefix ../crypto-intl/sys 80 #cinclude "conf/files.crypto-intl" 81 #prefix 82 83 # Networking options 84 options INET # IP prototol stack support 85 options INET6 # IPV6 86 #options IPSEC # IP security 87 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 88 #options IPSEC_DEBUG # debug for IP security 89 options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP 90 #options GATEWAY # IP packet forwarding 91 #options ISO,TPIP # OSI networking 92 #options EON # OSI tunneling over IP 93 #options CCITT,LLC,HDLC # X.25 94 options PFIL_HOOKS # pfil(9) packet filter hooks. 95 96 # Work-around for root on slow servers (insurance...) 97 options NFS_BOOT_RWSIZE=1024 98 options NFS_BOOT_BOOTPARAM 99 100 config netbsd root on ? type ? 101 102 # On-board I/O space (required) 103 include "arch/sun3/conf/obio.sun3" 104 105 # On-board memory (optional) 106 # See frame-buffers 107 obmem0 at mainbus? 108 109 # VME bus support (optional) 110 # One unit for each address space 111 vme0 at mainbus? # A16/D16 112 vme1 at mainbus? # A16/D32 113 vme2 at mainbus? # A24/D16 114 vme3 at mainbus? # A24/D32 115 vme4 at mainbus? # A32/D16 116 vme5 at mainbus? # A32/D32 117 118 # 119 # Serial ports 120 # 121 zstty0 at zsc1 channel 0 # ttya 122 zstty1 at zsc1 channel 1 # ttyb 123 124 kbd0 at zsc0 channel 0 # keyboard 125 ms0 at zsc0 channel 1 # mouse 126 127 # 128 # Network devices 129 # 130 131 # Intel Ethernet (onboard, or VME) 132 ie0 at obio0 addr 0x0C0000 ipl 3 133 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 134 135 # Lance Ethernet (only onboard) 136 le0 at obio0 addr 0x120000 ipl 3 137 138 # All Sun3 machines with an "le" (3/50, 3/60) should be 139 # presumed to have the old, buggy LANCE chip. (Rev. C) 140 options LANCE_REVC_BUG 141 142 # 143 # Disk and tape devices 144 # 145 146 # Sun3 "si" SCSI controller (NCR 5380) 147 # This driver has several flags which may be enabled using 148 # the "flags" directive. Valid flags are: 149 # 150 # 0x000ff Set (1<<target) to disable disconnect/reselect 151 # 0x0ff00 Set (1<<(target+8)) to disable parity checking 152 # 0x10000 Set this bit to disable DMA interrupts (poll) 153 # 0x20000 Set this bit to disable DMA entirely (use PIO) 154 # 155 # For example: "flags 0x1000f" would disable DMA interrupts, 156 # and disable disconnect/reselect for targets 0-3 157 si0 at obio0 addr 0x140000 ipl 2 158 si0 at vme2 addr 0x200000 ipl 2 vect 0x40 159 si1 at vme2 addr 0x204000 ipl 2 vect 0x41 160 161 # Xylogics 450/451 controllers (VME A16/D16) 162 xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 163 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 164 xy* at xyc? drive ? 165 166 # Xylogics 7053 controllers (VME A16/D32) 167 xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 168 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 169 xd* at xdc? drive ? 170 171 # Xylogics 472 tape controllers? 172 173 # Sun3/E SCSI+Ethernet board (VME A24/D16) 174 # Note: the board uses vect and vect+1 175 sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 176 sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 177 si* at sebuf? 178 ie* at sebuf? 179 180 # 181 # Frame buffer devices 182 # 183 184 include "arch/sun3/conf/bw2.sun3" 185 include "arch/sun3/conf/cg4.sun3" 186 187 # 3/60 P4 accelerated 8-bit color frame buffer 188 # cgsix0 at obmem0 addr 0xff000000 189 190 # 3/60 P4 24-bit color frame buffer 191 # cgeight0 at obmem0 addr 0xff300000 192 193 # Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16). 194 cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8 195 196 # Support for the CG9 24-bit frame buffer (VME A32/D32). 197 # cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA 198 199 # 200 # SCSI infrastructure 201 # 202 scsibus* at scsi? 203 204 sd* at scsibus? target ? lun ? # SCSI disks 205 st* at scsibus? target ? lun ? # SCSI tapes 206 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 207 ch* at scsibus? target ? lun ? # SCSI changer devices 208 ss* at scsibus? target ? lun ? # SCSI scanners 209 uk* at scsibus? target ? lun ? # unknown SCSI devices 210 211 # Memory-disk drivers 212 pseudo-device md 2 213 214 # Misc. 215 pseudo-device loop 1 # network loopback 216 pseudo-device bpfilter 8 # packet filter 217 pseudo-device sl 2 # CSLIP 218 pseudo-device ppp 2 # PPP 219 pseudo-device tun 2 # network tunneling over tty 220 #pseudo-device gre 2 # generic L3 over IP tunnel 221 #pseudo-device ipfilter # ip filter 222 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 223 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 224 # rnd is EXPERIMENTAL 225 #pseudo-device rnd # /dev/random and in-kernel generator 226 227 pseudo-device pty 32 # pseudo-terminals 228 #pseudo-device vnd 4 # paging to files 229 #pseudo-device ccd 4 # concatenated disks 230 #pseudo-device raid 4 # RAIDframe disk driver 231
Indexes created Thu Oct 02 10:09:58 GMT 2025