GENERIC revision 1.67
1 # $NetBSD: GENERIC,v 1.67 2000/06/09 13:16:00 tsutsui Exp $ 2 3 # GENERIC Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E) 4 # Supports root on: ie0, le0, sd*, ... 5 6 include "arch/sun3/conf/std.sun3" 7 8 #ident "GENERIC-$Revision: 1.67 $" 9 10 # Machines to be supported by this kernel 11 options FPU_EMULATE 12 options HAVECACHE # Sun3/260 VAC 13 14 # Needs to be set per system. i.e change these as you see fit 15 maxusers 4 16 17 # Standard system options 18 options KTRACE # system call tracing 19 options SYSVMSG # System V message queues 20 options SYSVSEM # System V semaphores 21 options SYSVSHM # System V shared memory 22 #options SHMMAXPGS=1024 # 1024 pages is the default 23 options LKM # loadable kernel modules 24 #options INSECURE # disable kernel security level 25 #options UCONSOLE # Allow non-root TIOCCONS 26 27 # Which kernel debugger? Uncomment either this: 28 options DDB 29 # ... or these for KGDB (gdb remote target) 30 #makeoptions DEBUG="-g" # debugging symbols for gdb 31 #options KGDB 32 #options KGDBDEV=0x0C01 # ttya=0C00 ttyb=0C01 33 34 # Other debugging options 35 #options DDB_HISTORY_SIZE=100 # enable history editing in DDB 36 #options DEBUG # kernel debugging code 37 #options DIAGNOSTIC # extra kernel sanity checking 38 #options KMEMSTATS # kernel memory statistics (vmstat -m) 39 #options PMAP_DEBUG 40 #options SCSIDEBUG 41 #options SCSIVERBOSE # Verbose SCSI errors 42 43 # Compatability options 44 options COMPAT_SUNOS # can run SunOS 4.1.1 executables 45 #options COMPAT_SVR4 # can run SVR4 executables 46 options COMPAT_43 # and 4.3BSD and ... 47 options COMPAT_10 # NetBSD 1.0 48 options COMPAT_11 # NetBSD 1.1 49 options COMPAT_12 # NetBSD 1.2 50 options COMPAT_13 # NetBSD 1.3 51 options COMPAT_14 # NetBSD 1.4 52 #options COMPAT_LINUX # can run Linux/m68k executables 53 #options EXEC_ELF32 # 32-bit ELF executables (Linux, SVR4) 54 55 # Filesystem options 56 file-system FFS # Berkeley Fast Filesystem 57 file-system NFS # Sun NFS client support 58 file-system CD9660 # ISO 9660 + Rock Ridge file system 59 file-system FDESC # /dev/fd/* 60 file-system KERNFS # /kern 61 file-system NULLFS # loopback file system 62 file-system OVERLAY # overlay file system 63 file-system PROCFS # /proc 64 file-system UNION # union file system 65 file-system MFS # memory-based filesystem 66 67 options NFSSERVER # nfs server support 68 options QUOTA # FFS quotas 69 #options FFS_EI # FFS Endian Independant support 70 #options SOFTDEP # FFS soft updates support. 71 72 # Pull in config fragments for kernel crypto. This is required for 73 # options IPSEC etc. to work. If you want to run with IPSEC, uncomment 74 # one of these, based on whether you use crypto-us or crypto-intl, and 75 # adjust the prefixes as necessary. 76 77 #prefix ../crypto-us/sys 78 #cinclude "conf/files.crypto-us" 79 #prefix 80 81 #prefix ../crypto-intl/sys 82 #cinclude "conf/files.crypto-intl" 83 #prefix 84 85 # Networking options 86 options INET # IP prototol stack support 87 options INET6 # IPV6 88 #options IPSEC # IP security 89 #options IPSEC_ESP # IP security (encryption part; define w/IPSEC) 90 #options IPSEC_DEBUG # debug for IP security 91 options TCP_COMPAT_42 # compatibility with 4.2BSD TCP/IP 92 #options GATEWAY # IP packet forwarding 93 #options ISO,TPIP # OSI networking 94 #options EON # OSI tunneling over IP 95 #options CCITT,LLC,HDLC # X.25 96 options PFIL_HOOKS # pfil(9) packet filter hooks. 97 98 # Work-around for root on slow servers (insurance...) 99 options NFS_BOOT_RWSIZE=1024 100 options NFS_BOOT_BOOTPARAM 101 102 config netbsd root on ? type ? 103 104 # On-board I/O space (required) 105 include "arch/sun3/conf/obio.sun3" 106 107 # On-board memory (optional) 108 # See frame-buffers 109 obmem0 at mainbus? 110 111 # VME bus support (optional) 112 # One unit for each address space 113 vme0 at mainbus? # A16/D16 114 vme1 at mainbus? # A16/D32 115 vme2 at mainbus? # A24/D16 116 vme3 at mainbus? # A24/D32 117 vme4 at mainbus? # A32/D16 118 vme5 at mainbus? # A32/D32 119 120 # 121 # Serial ports 122 # 123 zstty0 at zsc1 channel 0 # ttya 124 zstty1 at zsc1 channel 1 # ttyb 125 126 kbd0 at zsc0 channel 0 # keyboard 127 ms0 at zsc0 channel 1 # mouse 128 129 # 130 # Network devices 131 # 132 133 # Intel Ethernet (onboard, or VME) 134 ie0 at obio0 addr 0x0C0000 ipl 3 135 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75 136 137 # Lance Ethernet (only onboard) 138 le0 at obio0 addr 0x120000 ipl 3 139 140 # All Sun3 machines with an "le" (3/50, 3/60) should be 141 # presumed to have the old, buggy LANCE chip. (Rev. C) 142 options LANCE_REVC_BUG 143 144 # 145 # Disk and tape devices 146 # 147 148 # Sun3 "si" SCSI controller (NCR 5380) 149 # This driver has several flags which may be enabled using 150 # the "flags" directive. Valid flags are: 151 # 152 # 0x000ff Set (1<<target) to disable disconnect/reselect 153 # 0x0ff00 Set (1<<(target+8)) to disable parity checking 154 # 0x10000 Set this bit to disable DMA interrupts (poll) 155 # 0x20000 Set this bit to disable DMA entirely (use PIO) 156 # 157 # For example: "flags 0x1000f" would disable DMA interrupts, 158 # and disable disconnect/reselect for targets 0-3 159 si0 at obio0 addr 0x140000 ipl 2 160 si0 at vme2 addr 0x200000 ipl 2 vect 0x40 161 si1 at vme2 addr 0x204000 ipl 2 vect 0x41 162 163 # Xylogics 450/451 controllers (VME A16/D16) 164 xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48 165 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49 166 xy* at xyc? drive ? 167 168 # Xylogics 7053 controllers (VME A16/D32) 169 xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44 170 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45 171 xd* at xdc? drive ? 172 173 # Xylogics 472 tape controllers? 174 175 # Sun3/E SCSI+Ethernet board (VME A24/D16) 176 # Note: the board uses vect and vect+1 177 sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75 178 sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77 179 si* at sebuf? 180 ie* at sebuf? 181 182 # 183 # Frame buffer devices 184 # 185 186 include "arch/sun3/conf/bw2.sun3" 187 include "arch/sun3/conf/cg4.sun3" 188 189 # 3/60 P4 accelerated 8-bit color frame buffer 190 # cgsix0 at obmem0 addr 0xff000000 191 192 # 3/60 P4 24-bit color frame buffer 193 # cgeight0 at obmem0 addr 0xff300000 194 195 # Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16). 196 cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8 197 198 # Support for the CG9 24-bit frame buffer (VME A32/D32). 199 # cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA 200 201 # 202 # SCSI infrastructure 203 # 204 scsibus* at scsi? 205 206 sd* at scsibus? target ? lun ? # SCSI disks 207 st* at scsibus? target ? lun ? # SCSI tapes 208 cd* at scsibus? target ? lun ? # SCSI CD-ROMs 209 ch* at scsibus? target ? lun ? # SCSI changer devices 210 ss* at scsibus? target ? lun ? # SCSI scanners 211 uk* at scsibus? target ? lun ? # unknown SCSI devices 212 213 # Memory-disk drivers 214 pseudo-device md 2 215 216 # Misc. 217 pseudo-device loop 1 # network loopback 218 pseudo-device bpfilter 8 # packet filter 219 pseudo-device sl 2 # CSLIP 220 pseudo-device ppp 2 # PPP 221 pseudo-device tun 2 # network tunneling over tty 222 #pseudo-device gre 2 # generic L3 over IP tunnel 223 #pseudo-device ipfilter # ip filter 224 pseudo-device gif 4 # IPv[46] over IPv[46] tunnel (RFC1933) 225 #pseudo-device faith 1 # IPv[46] tcp relay translation i/f 226 #pseudo-device stf 1 # 6to4 IPv6 over IPv4 encapsulation 227 # rnd is EXPERIMENTAL 228 #pseudo-device rnd # /dev/random and in-kernel generator 229 230 pseudo-device pty 32 # pseudo-terminals 231 pseudo-device vnd 4 # paging to files 232 #pseudo-device ccd 4 # concatenated disks 233 #pseudo-device raid 4 # RAIDframe disk driver 234 #options RAID_AUTOCONFIG # auto-configuration of RAID components 235
Indexes created Thu Oct 02 14:10:14 GMT 2025