Home | History | Annotate | Line # | Download | only in conf
GENERIC revision 1.94
      1 # $NetBSD: GENERIC,v 1.94 2002/10/06 02:12:02 provos Exp $
      2 #
      3 # GENERIC machine description file
      4 # 
      5 # This machine description file is used to generate the default NetBSD
      6 # kernel.  The generic kernel does not include all options, subsystems
      7 # and device drivers, but should be useful for most applications.
      8 #
      9 # The machine description file can be customised for your specific
     10 # machine to reduce the kernel size and improve its performance.
     11 #
     12 # For further information on compiling NetBSD kernels, see the config(8)
     13 # man page.
     14 #
     15 # For further information on hardware support for this architecture, see
     16 # the intro(4) man page.  For further information about kernel options
     17 # for this architecture, see the options(4) man page.  For an explanation
     18 # of each device driver in this file see the section 4 man page for the
     19 # device.
     20 
     21 # Supports Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E)
     22 # Supports root on: ie0, le0, sd*, ...
     23 
     24 include 	"arch/sun3/conf/std.sun3"
     25 
     26 options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
     27 
     28 #ident 		"GENERIC-$Revision: 1.94 $"
     29 
     30 # Machines to be supported by this kernel
     31 options 	FPU_EMULATE
     32 options 	HAVECACHE		# Sun3/260 VAC
     33 
     34 # Needs to be set per system.  i.e change these as you see fit
     35 maxusers	4
     36 
     37 # Standard system options
     38 options 	KTRACE		# system call tracing
     39 options 	SYSTRACE	# system call vetting via systrace(1)
     40 options 	SYSVMSG		# System V message queues
     41 options 	SYSVSEM		# System V semaphores
     42 #options 	SEMMNI=10	# number of semaphore identifiers
     43 #options 	SEMMNS=60	# number of semaphores in system
     44 #options 	SEMUME=10	# max number of undo entries per process
     45 #options 	SEMMNU=30	# number of undo structures in system
     46 options 	SYSVSHM		# System V shared memory
     47 #options 	SHMMAXPGS=1024	# 1024 pages is the default
     48 options 	LKM		# loadable kernel modules
     49 #options 	INSECURE	# disable kernel security level
     50 #options 	UCONSOLE	# Allow non-root TIOCCONS
     51 options 	USERCONF	# userconf(4) support
     52 #options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
     53 
     54 # Which kernel debugger?  Uncomment either this:
     55 options 	DDB
     56 # ... or these for KGDB (gdb remote target)
     57 #makeoptions	DEBUG="-g"	# debugging symbols for gdb
     58 #options 	KGDB
     59 #options 	KGDB_DEV=0x0C01	# ttya=0C00 ttyb=0C01
     60 
     61 # Other debugging options
     62 #options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
     63 #options 	DEBUG		# kernel debugging code
     64 #options 	DIAGNOSTIC	# extra kernel sanity checking
     65 #options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
     66 #options 	PMAP_DEBUG
     67 #options 	SCSIDEBUG
     68 #options 	SCSIVERBOSE		# Verbose SCSI errors
     69 
     70 # Compatibility options
     71 options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
     72 #options 	COMPAT_SVR4	# can run SVR4 executables
     73 options 	COMPAT_43	# and 4.3BSD and ...
     74 options 	COMPAT_10	# NetBSD 1.0
     75 options 	COMPAT_11	# NetBSD 1.1
     76 options 	COMPAT_12	# NetBSD 1.2
     77 options 	COMPAT_13	# NetBSD 1.3
     78 options 	COMPAT_14	# NetBSD 1.4
     79 options 	COMPAT_AOUT_M68K # support for NetBSD a.out executables
     80 #options 	COMPAT_LINUX	# can run Linux/m68k executables
     81 options 	EXEC_AOUT	# support for a.out executables
     82 #options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
     83 
     84 # Filesystem options
     85 file-system	FFS		# Berkeley Fast Filesystem
     86 file-system	NFS		# Sun NFS client support
     87 file-system	CD9660		# ISO 9660 + Rock Ridge file system
     88 file-system	FDESC		# /dev/fd/*
     89 file-system	KERNFS		# /kern
     90 file-system	NULLFS		# loopback file system
     91 file-system 	OVERLAY		# overlay file system
     92 file-system	PROCFS		# /proc
     93 file-system	UNION		# union file system
     94 file-system	MFS		# memory-based filesystem
     95 
     96 options 	NFSSERVER	# nfs server support
     97 options 	QUOTA		# FFS quotas
     98 #options 	FFS_EI		# FFS Endian Independant support
     99 options 	SOFTDEP		# FFS soft updates support.
    100 
    101 # Networking options
    102 options 	INET		# IP prototol stack support
    103 options 	INET6		# IPV6
    104 #options 	IPSEC		# IP security
    105 #options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
    106 #options 	IPSEC_DEBUG	# debug for IP security
    107 #options 	GATEWAY		# IP packet forwarding
    108 #options 	ISO,TPIP	# OSI networking
    109 #options 	EON		# OSI tunneling over IP
    110 #options 	CCITT,LLC,HDLC	# X.25
    111 options 	PFIL_HOOKS	# pfil(9) packet filter hooks.
    112 #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
    113 
    114 # Work-around for root on slow servers (insurance...)
    115 options 	NFS_BOOT_RWSIZE=1024
    116 options 	NFS_BOOT_BOOTPARAM
    117 
    118 config		netbsd root on ? type ?
    119 
    120 # On-board I/O space (required)
    121 include "arch/sun3/conf/obio.sun3"
    122 
    123 # On-board memory (optional)
    124 # See frame-buffers
    125 obmem0 at mainbus?
    126 
    127 # VME bus support (optional)
    128 # One unit for each address space
    129 vme0 at mainbus? # A16/D16
    130 vme1 at mainbus? # A16/D32
    131 vme2 at mainbus? # A24/D16
    132 vme3 at mainbus? # A24/D32
    133 vme4 at mainbus? # A32/D16
    134 vme5 at mainbus? # A32/D32
    135 
    136 #
    137 # Serial ports
    138 #
    139 zstty0	at zsc1 channel 0	# ttya
    140 zstty1	at zsc1 channel 1	# ttyb
    141 
    142 kbd0	at zsc0 channel 0	# keyboard
    143 ms0	at zsc0 channel 1	# mouse
    144 
    145 #
    146 # Network devices
    147 #
    148 
    149 # Intel Ethernet (onboard, or VME)
    150 ie0 at obio0 addr 0x0C0000 ipl 3
    151 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
    152 
    153 # Lance Ethernet (only onboard)
    154 le0 at obio0 addr 0x120000 ipl 3
    155 
    156 # All Sun3 machines with an "le" (3/50, 3/60) should be
    157 # presumed to have the old, buggy LANCE chip. (Rev. C)
    158 options 	LANCE_REVC_BUG
    159 
    160 #
    161 # Disk and tape devices
    162 #
    163 
    164 # Sun3 "si" SCSI controller (NCR 5380)
    165 # This driver has several flags which may be enabled using
    166 # the "flags" directive.  Valid flags are:
    167 #
    168 # 0x000ff	Set (1<<target) to disable disconnect/reselect
    169 # 0x0ff00	Set (1<<(target+8)) to disable parity checking
    170 # 0x10000	Set this bit to disable DMA interrupts (poll)
    171 # 0x20000	Set this bit to disable DMA entirely (use PIO)
    172 #
    173 # For example: "flags 0x1000f" would disable DMA interrupts,
    174 # and disable disconnect/reselect for targets 0-3
    175 si0 at obio0 addr 0x140000 ipl 2
    176 si0 at vme2 addr 0x200000 ipl 2 vect 0x40
    177 si1 at vme2 addr 0x204000 ipl 2 vect 0x41
    178 
    179 # Xylogics 450/451 controllers (VME A16/D16)
    180 xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
    181 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
    182 xy* at xyc? drive ?
    183 
    184 # Xylogics 7053 controllers (VME A16/D32)
    185 xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
    186 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
    187 xd* at xdc? drive ?
    188 
    189 # Xylogics 472 tape controllers?
    190 
    191 # Sun3/E SCSI+Ethernet board (VME A24/D16)
    192 # Note: the board uses vect and vect+1
    193 sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75
    194 sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77
    195 si* at sebuf?
    196 ie* at sebuf?
    197 
    198 #
    199 # Frame buffer devices
    200 #
    201 
    202 include "arch/sun3/conf/bw2.sun3"
    203 include "arch/sun3/conf/cg4.sun3"
    204 
    205 # 3/60 P4 accelerated 8-bit color frame buffer
    206 # cgsix0 at obmem0 addr 0xff000000
    207 
    208 # 3/60 P4 24-bit color frame buffer
    209 # cgeight0 at obmem0 addr 0xff300000
    210 
    211 # Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).
    212 cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8
    213 
    214 # Support for the CG9 24-bit frame buffer (VME A32/D32).
    215 # cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA
    216 
    217 #
    218 # SCSI infrastructure
    219 #
    220 scsibus* at scsi?
    221 
    222 sd* at scsibus? target ? lun ?		# SCSI disks
    223 st* at scsibus? target ? lun ?		# SCSI tapes
    224 cd* at scsibus? target ? lun ?		# SCSI CD-ROMs
    225 ch* at scsibus? target ? lun ?		# SCSI changer devices
    226 ss* at scsibus? target ? lun ?		# SCSI scanners
    227 uk* at scsibus? target ? lun ?		# unknown SCSI devices
    228 
    229 # Memory-disk drivers
    230 pseudo-device	md		2
    231 
    232 # Misc.
    233 pseudo-device	loop		1	# network loopback
    234 pseudo-device	bpfilter	8	# packet filter
    235 pseudo-device	sl		2	# CSLIP
    236 pseudo-device	ppp		2	# PPP
    237 pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
    238 pseudo-device	tun		2	# network tunneling over tty
    239 #pseudo-device	gre		2	# generic L3 over IP tunnel
    240 #pseudo-device	ipfilter		# ip filter
    241 pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
    242 #pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
    243 #pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
    244 pseudo-device	vlan			# IEEE 802.1q encapsulation
    245 pseudo-device	bridge			# simple inter-network bridging
    246 pseudo-device	rnd			# /dev/random and in-kernel generator
    247 
    248 pseudo-device	pty			# pseudo-terminals
    249 pseudo-device	vnd		4	# paging to files
    250 #pseudo-device	ccd		4	# concatenated disks
    251 #pseudo-device	raid		4	# RAIDframe disk driver
    252 #options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    253 # Options to enable various other RAIDframe RAID types.
    254 # options	RF_INCLUDE_EVENODD=1
    255 # options	RF_INCLUDE_RAID5_RS=1
    256 # options	RF_INCLUDE_PARITYLOGGING=1
    257 # options	RF_INCLUDE_CHAINDECLUSTER=1
    258 # options	RF_INCLUDE_INTERDECLUSTER=1
    259 # options 	RF_INCLUDE_PARITY_DECLUSTERING=1
    260 # options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
    261 pseudo-device	clockctl		# user control of clock subsystem
    262