Home | History | Annotate | Line # | Download | only in conf
GENERIC revision 1.96
      1 # $NetBSD: GENERIC,v 1.96 2002/10/18 15:11:16 junyoung Exp $
      2 #
      3 # GENERIC machine description file
      4 # 
      5 # This machine description file is used to generate the default NetBSD
      6 # kernel.  The generic kernel does not include all options, subsystems
      7 # and device drivers, but should be useful for most applications.
      8 #
      9 # The machine description file can be customised for your specific
     10 # machine to reduce the kernel size and improve its performance.
     11 #
     12 # For further information on compiling NetBSD kernels, see the config(8)
     13 # man page.
     14 #
     15 # For further information on hardware support for this architecture, see
     16 # the intro(4) man page.  For further information about kernel options
     17 # for this architecture, see the options(4) man page.  For an explanation
     18 # of each device driver in this file see the section 4 man page for the
     19 # device.
     20 
     21 # Supports Sun3 (3/50, 3/60, 3/110, 3/160, 3/260, 3/E)
     22 # Supports root on: ie0, le0, sd*, ...
     23 
     24 include 	"arch/sun3/conf/std.sun3"
     25 
     26 options 	INCLUDE_CONFIG_FILE	# embed config file in kernel binary
     27 
     28 #ident 		"GENERIC-$Revision: 1.96 $"
     29 
     30 # Machines to be supported by this kernel
     31 options 	FPU_EMULATE
     32 options 	HAVECACHE		# Sun3/260 VAC
     33 
     34 # Needs to be set per system.  i.e change these as you see fit
     35 maxusers	4
     36 
     37 # Standard system options
     38 options 	KTRACE		# system call tracing
     39 options 	SYSTRACE	# system call vetting via systrace(1)
     40 options 	SYSVMSG		# System V message queues
     41 options 	SYSVSEM		# System V semaphores
     42 #options 	SEMMNI=10	# number of semaphore identifiers
     43 #options 	SEMMNS=60	# number of semaphores in system
     44 #options 	SEMUME=10	# max number of undo entries per process
     45 #options 	SEMMNU=30	# number of undo structures in system
     46 options 	SYSVSHM		# System V shared memory
     47 #options 	SHMMAXPGS=1024	# 1024 pages is the default
     48 options 	LKM		# loadable kernel modules
     49 #options 	INSECURE	# disable kernel security level
     50 #options 	UCONSOLE	# Allow non-root TIOCCONS
     51 options 	USERCONF	# userconf(4) support
     52 #options	PIPE_SOCKETPAIR	# smaller, but slower pipe(2)
     53 
     54 # Enable experimental buffer queue strategy for better responsiness under 
     55 # high disk I/O load. Use it with caution - it's not proven to be stable yet.
     56 #options 	NEW_BUFQ_STRATEGY
     57 
     58 # Which kernel debugger?  Uncomment either this:
     59 options 	DDB
     60 # ... or these for KGDB (gdb remote target)
     61 #makeoptions	DEBUG="-g"	# debugging symbols for gdb
     62 #options 	KGDB
     63 #options 	KGDB_DEV=0x0C01	# ttya=0C00 ttyb=0C01
     64 
     65 # Other debugging options
     66 #options 	DDB_HISTORY_SIZE=100	# enable history editing in DDB
     67 #options 	DEBUG		# kernel debugging code
     68 #options 	DIAGNOSTIC	# extra kernel sanity checking
     69 #options 	KMEMSTATS	# kernel memory statistics (vmstat -m)
     70 #options 	PMAP_DEBUG
     71 #options 	SCSIDEBUG
     72 #options 	SCSIVERBOSE		# Verbose SCSI errors
     73 
     74 # Compatibility options
     75 options 	COMPAT_SUNOS	# can run SunOS 4.1.1 executables
     76 #options 	COMPAT_SVR4	# can run SVR4 executables
     77 options 	COMPAT_43	# and 4.3BSD and ...
     78 options 	COMPAT_10	# NetBSD 1.0
     79 options 	COMPAT_11	# NetBSD 1.1
     80 options 	COMPAT_12	# NetBSD 1.2
     81 options 	COMPAT_13	# NetBSD 1.3
     82 options 	COMPAT_14	# NetBSD 1.4
     83 options 	COMPAT_AOUT_M68K # support for NetBSD a.out executables
     84 #options 	COMPAT_LINUX	# can run Linux/m68k executables
     85 options 	EXEC_AOUT	# support for a.out executables
     86 #options 	TCP_COMPAT_42	# 4.2BSD TCP/IP bug compat. Not recommended.
     87 
     88 # Filesystem options
     89 file-system	FFS		# Berkeley Fast Filesystem
     90 file-system	NFS		# Sun NFS client support
     91 file-system	CD9660		# ISO 9660 + Rock Ridge file system
     92 file-system	FDESC		# /dev/fd/*
     93 file-system	KERNFS		# /kern
     94 file-system	NULLFS		# loopback file system
     95 file-system 	OVERLAY		# overlay file system
     96 file-system	PROCFS		# /proc
     97 file-system	UNION		# union file system
     98 file-system	MFS		# memory-based filesystem
     99 
    100 options 	NFSSERVER	# nfs server support
    101 options 	QUOTA		# FFS quotas
    102 #options 	FFS_EI		# FFS Endian Independant support
    103 options 	SOFTDEP		# FFS soft updates support.
    104 
    105 # Networking options
    106 options 	INET		# IP prototol stack support
    107 options 	INET6		# IPV6
    108 #options 	IPSEC		# IP security
    109 #options 	IPSEC_ESP	# IP security (encryption part; define w/IPSEC)
    110 #options 	IPSEC_DEBUG	# debug for IP security
    111 #options 	GATEWAY		# IP packet forwarding
    112 #options 	ISO,TPIP	# OSI networking
    113 #options 	EON		# OSI tunneling over IP
    114 #options 	CCITT,LLC,HDLC	# X.25
    115 options 	PFIL_HOOKS	# pfil(9) packet filter hooks.
    116 #options 	TCP_DEBUG	# Record last TCP_NDEBUG packets with SO_DEBUG
    117 
    118 # Work-around for root on slow servers (insurance...)
    119 options 	NFS_BOOT_RWSIZE=1024
    120 options 	NFS_BOOT_BOOTPARAM
    121 
    122 config		netbsd root on ? type ?
    123 
    124 # On-board I/O space (required)
    125 include "arch/sun3/conf/obio.sun3"
    126 
    127 # On-board memory (optional)
    128 # See frame-buffers
    129 obmem0 at mainbus?
    130 
    131 # VME bus support (optional)
    132 # One unit for each address space
    133 vme0 at mainbus? # A16/D16
    134 vme1 at mainbus? # A16/D32
    135 vme2 at mainbus? # A24/D16
    136 vme3 at mainbus? # A24/D32
    137 vme4 at mainbus? # A32/D16
    138 vme5 at mainbus? # A32/D32
    139 
    140 #
    141 # Serial ports
    142 #
    143 zstty0	at zsc1 channel 0	# ttya
    144 zstty1	at zsc1 channel 1	# ttyb
    145 
    146 kbd0	at zsc0 channel 0	# keyboard
    147 ms0	at zsc0 channel 1	# mouse
    148 
    149 #
    150 # Network devices
    151 #
    152 
    153 # Intel Ethernet (onboard, or VME)
    154 ie0 at obio0 addr 0x0C0000 ipl 3
    155 ie1 at vme2 addr 0xe88000 ipl 3 vect 0x75
    156 
    157 # Lance Ethernet (only onboard)
    158 le0 at obio0 addr 0x120000 ipl 3
    159 
    160 # All Sun3 machines with an "le" (3/50, 3/60) should be
    161 # presumed to have the old, buggy LANCE chip. (Rev. C)
    162 options 	LANCE_REVC_BUG
    163 
    164 #
    165 # Disk and tape devices
    166 #
    167 
    168 # Sun3 "si" SCSI controller (NCR 5380)
    169 # This driver has several flags which may be enabled using
    170 # the "flags" directive.  Valid flags are:
    171 #
    172 # 0x000ff	Set (1<<target) to disable disconnect/reselect
    173 # 0x0ff00	Set (1<<(target+8)) to disable parity checking
    174 # 0x10000	Set this bit to disable DMA interrupts (poll)
    175 # 0x20000	Set this bit to disable DMA entirely (use PIO)
    176 #
    177 # For example: "flags 0x1000f" would disable DMA interrupts,
    178 # and disable disconnect/reselect for targets 0-3
    179 si0 at obio0 addr 0x140000 ipl 2
    180 si0 at vme2 addr 0x200000 ipl 2 vect 0x40
    181 si1 at vme2 addr 0x204000 ipl 2 vect 0x41
    182 
    183 # Xylogics 450/451 controllers (VME A16/D16)
    184 xyc0 at vme0 addr 0xee40 ipl 2 vect 0x48
    185 xyc1 at vme0 addr 0xee48 ipl 2 vect 0x49
    186 xy* at xyc? drive ?
    187 
    188 # Xylogics 7053 controllers (VME A16/D32)
    189 xdc0 at vme1 addr 0xee80 ipl 2 vect 0x44
    190 xdc1 at vme1 addr 0xee90 ipl 2 vect 0x45
    191 xd* at xdc? drive ?
    192 
    193 # Xylogics 472 tape controllers?
    194 
    195 # Sun3/E SCSI+Ethernet board (VME A24/D16)
    196 # Note: the board uses vect and vect+1
    197 sebuf0 at vme2 addr 0x300000 ipl 2 vect 0x74 # and 0x75
    198 sebuf1 at vme2 addr 0x340000 ipl 2 vect 0x76 # and 0x77
    199 si* at sebuf?
    200 ie* at sebuf?
    201 
    202 #
    203 # Frame buffer devices
    204 #
    205 
    206 include "arch/sun3/conf/bw2.sun3"
    207 include "arch/sun3/conf/cg4.sun3"
    208 
    209 # 3/60 P4 accelerated 8-bit color frame buffer
    210 # cgsix0 at obmem0 addr 0xff000000
    211 
    212 # 3/60 P4 24-bit color frame buffer
    213 # cgeight0 at obmem0 addr 0xff300000
    214 
    215 # Sun-3 color board, or CG5 8-bit frame buffer (VME A24/D16).
    216 cgtwo0 at vme2 addr 0x400000 ipl 4 vect 0xA8
    217 
    218 # Support for the CG9 24-bit frame buffer (VME A32/D32).
    219 # cgnine0 at vme5 addr 0x08000000 ipl 4 vect 0xAA
    220 
    221 #
    222 # SCSI infrastructure
    223 #
    224 scsibus* at scsi?
    225 
    226 sd* at scsibus? target ? lun ?		# SCSI disks
    227 st* at scsibus? target ? lun ?		# SCSI tapes
    228 cd* at scsibus? target ? lun ?		# SCSI CD-ROMs
    229 ch* at scsibus? target ? lun ?		# SCSI changer devices
    230 ss* at scsibus? target ? lun ?		# SCSI scanners
    231 uk* at scsibus? target ? lun ?		# unknown SCSI devices
    232 
    233 # Memory-disk drivers
    234 pseudo-device	md		2
    235 
    236 # Misc.
    237 pseudo-device	loop		1	# network loopback
    238 pseudo-device	bpfilter	8	# packet filter
    239 pseudo-device	sl		2	# CSLIP
    240 pseudo-device	ppp		2	# PPP
    241 pseudo-device	pppoe			# PPP over Ethernet (RFC 2516)
    242 pseudo-device	tun		2	# network tunneling over tty
    243 #pseudo-device	gre		2	# generic L3 over IP tunnel
    244 #pseudo-device	ipfilter		# ip filter
    245 pseudo-device	gif		4	# IPv[46] over IPv[46] tunnel (RFC1933)
    246 #pseudo-device	faith		1	# IPv[46] tcp relay translation i/f
    247 #pseudo-device	stf		1	# 6to4 IPv6 over IPv4 encapsulation
    248 pseudo-device	vlan			# IEEE 802.1q encapsulation
    249 pseudo-device	bridge			# simple inter-network bridging
    250 pseudo-device	rnd			# /dev/random and in-kernel generator
    251 
    252 pseudo-device	pty			# pseudo-terminals
    253 pseudo-device	vnd		4	# paging to files
    254 #pseudo-device	ccd		4	# concatenated disks
    255 #pseudo-device	cgd		4	# cryptographic disk devices
    256 #pseudo-device	raid		4	# RAIDframe disk driver
    257 #options 	RAID_AUTOCONFIG		# auto-configuration of RAID components
    258 # Options to enable various other RAIDframe RAID types.
    259 # options	RF_INCLUDE_EVENODD=1
    260 # options	RF_INCLUDE_RAID5_RS=1
    261 # options	RF_INCLUDE_PARITYLOGGING=1
    262 # options	RF_INCLUDE_CHAINDECLUSTER=1
    263 # options	RF_INCLUDE_INTERDECLUSTER=1
    264 # options 	RF_INCLUDE_PARITY_DECLUSTERING=1
    265 # options	RF_INCLUDE_PARITY_DECLUSTERING_DS=1
    266 pseudo-device	clockctl		# user control of clock subsystem
    267