Home | History | Annotate | Line # | Download | only in xxboot
      1 /*	$NetBSD: start.S,v 1.7 2020/04/06 01:43:26 snj Exp $ */
      2 /*
      3  * Copyright (c) 1995 Ludd, University of Lule}, Sweden.
      4  * All rights reserved.
      5  *
      6  * This code is derived from software contributed to Ludd by
      7  * Bertram Barth.
      8  *
      9  * Redistribution and use in source and binary forms, with or without
     10  * modification, are permitted provided that the following conditions
     11  * are met:
     12  * 1. Redistributions of source code must retain the above copyright
     13  *    notice, this list of conditions and the following disclaimer.
     14  * 2. Redistributions in binary form must reproduce the above copyright
     15  *    notice, this list of conditions and the following disclaimer in the
     16  *    documentation and/or other materials provided with the distribution.
     17  *
     18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
     19  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
     20  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
     21  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
     22  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
     23  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
     24  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
     25  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
     26  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
     27  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
     28  */
     29 
     30  /* All bugs are subject to removal without further notice */
     31 
     32 
     33 #define _LOCORE
     34 
     35 #define	__HAVE_OLD_DISKLABEL	/* not automatically added due to _LOCORE */
     36 #define OMIT_DKTYPENUMS
     37 #define OMIT_FSTYPENUMS
     38 #include "sys/disklabel.h"
     39 
     40 #include "../include/mtpr.h"
     41 #include "../include/asm.h"
     42 
     43 _C_LABEL(_start):
     44 _C_LABEL(start):
     45 	.globl _C_LABEL(start)	# this is the symbolic name for the start
     46 	.globl _C_LABEL(_start) # of code to be relocated. We can use this
     47 				# to get the actual/real address (pc-rel)
     48 				# or to get the relocated address (abs).
     49 
     50 .org	0x00			# uVAX booted from TK50 starts here
     51 	brb	from_0x00	# continue behind dispatch-block
     52 
     53 # At offset 0x02 we have a dual used area: VMB.EXE starts execution here,
     54 # and uVAX-ROM looks for a pointer to a parameter block. We arrange for
     55 # the parameter block offset to disassemble as a CASEL instructions which
     56 # falls through to 0x08.
     57 .org	0x02			# information used by uVAX-ROM
     58 	.byte	0xcf		# offset in words to identification area
     59 	.byte	1		# this byte must be 1
     60 	.word	0		# logical block number (word swapped)
     61 	.word	0		# of the secondary image
     62 
     63 .org	0x08			#
     64 	brb	from_0x08	# skip ...
     65 
     66 .org	0x0C			# 11/750  & 8200 starts here
     67 	movzbl	$1,_C_LABEL(from)# We booted from "old" rom.
     68 	brw	cont_750
     69 
     70 
     71 from_0x00:			# uVAX from TK50
     72 	brw	start_uvax	# all uVAXen continue there
     73 
     74 from_0x08:			# Any machine from VMB
     75 	movzbl	$4,_C_LABEL(from)		# Booted from full VMB
     76 	/*
     77 	 * Read in block 1-15.
     78 	 */
     79 	movl	52(%r11), %r7	# load iovec/bqo into %r7
     80 	addl3	(%r7), %r7, %r6	# load qio into %r6
     81 	pushl	%r11		# base of rpb
     82 	pushl	$0		# virtual-flag
     83 	pushl	$33		# read-logical-block
     84 	pushl	$1		# lbn to start reading
     85 	pushl	$7680		# number of bytes to read
     86 	pushab	start_uvax	# buffer-address
     87 	calls	$6, (%r6)	# call the qio-routine
     88 	brw	start_uvax
     89 
     90 # the complete area reserved for label
     91 # must be empty (i.e. filled with zeroes).
     92 # disklabel(8) checks that before installing
     93 # the bootblocks over existing label.
     94 
     95 .org	LABELOFFSET
     96 	.globl	_C_LABEL(romlabel)
     97 _C_LABEL(romlabel):
     98 	.long	0
     99 
    100 .org	LABELOFFSET + d_end_
    101 # Make sure the parameter block is past the disklabel.
    102 # If not, the next .org would try to move backwards.
    103 
    104 /*
    105  * Parameter block for uVAX boot.
    106  */
    107 #define VOLINFO		0	/* 1=single-sided  81=double-sided volumes */
    108 #define SISIZE		16	/* size in blocks of secondary image */
    109 #define SILOAD		0	/* load offset (usually 0) from the default */
    110 #define SIOFF		0x200	/* byte offset into secondary image */
    111 
    112 .org	0x19e	# do not move, see comment earlier about CASEL
    113 	.byte	0x18		# must be 0x18
    114 	.byte	0x00		# must be 0x00 (MBZ)
    115 	.byte	0x00		# any value
    116 	.byte	0xFF - (0x18 + 0x00 + 0x00)
    117 		/* 4th byte holds 1s' complement of sum of previous 3 bytes */
    118 
    119 	.byte	0x00		# must be 0x00 (MBZ)
    120 	.byte	VOLINFO
    121 	.byte	0x00		# any value
    122 	.byte	0x00		# any value
    123 
    124 	.long	SISIZE		# size in blocks of secondary image
    125 	.long	SILOAD		# load offset (usually 0)
    126 	.long	SIOFF		# byte offset into secondary image
    127 	.long	(SISIZE + SILOAD + SIOFF)	# sum of previous 3
    128 
    129 
    130 	.align	2
    131 	.globl	_C_LABEL(from)
    132 _C_LABEL(from):
    133 	.long	0
    134 
    135 /*
    136  * After bootblock (LBN0) has been loaded into the first page
    137  * of good memory by 11/750's ROM-code (transfer address
    138  * of bootblock-code is: base of good memory + 0x0C) registers
    139  * are initialized as:
    140  *	R0:	type of boot-device
    141  *			0:	Massbus device
    142  *			1:	RK06/RK07
    143  *			2:	RL02
    144  *			17:	UDA50
    145  *			35:	TK50
    146  *			64:	TU58
    147  *	R1:	(UBA) address of UNIBUS I/O-page
    148  *		(MBA) address of boot device's adapter
    149  *	R2:	(UBA) address of the boot device's CSR
    150  *		(MBA) controller number of boot device
    151  *	R6:	address of driver subroutine in ROM
    152  *
    153  * cont_750 reads in LBN1-15 for further execution.
    154  */
    155 cont_750:
    156 	movl	$_C_LABEL(start), %sp	# move stack to avoid clobbering the code
    157 	pushr	$0x131		# save clobbered registers
    158 	clrl	%r4		# %r4 == # of blocks transferred
    159 	movab	_C_LABEL(start),%r5	# %r5 have base address for next transfer
    160 	pushl	%r5		# ...on stack also (Why?)
    161 1:	incl	%r4		# increment block count
    162 	movl	%r4,%r8		# LBN is in %r8 for rom routine
    163 	addl2	$0x200,%r5	# Increase address for next read
    164 	cmpl	$16,%r4		# read 15 blocks?
    165 	beql	2f		# Yep
    166 	movl	%r5,(%sp)		# move address to stack also
    167 	jsb	(%r6)		# read 512 bytes
    168 	blbs	%r0,1b		# jump if read succeeded
    169 	halt			# otherwise die...
    170 2:	tstl	(%sp)+		# remove boring arg from stack
    171 	popr	$0x131		# restore clobbered registers
    172 	brw	start_all	# Ok, continue...
    173 
    174 /* uVAX main entry is at the start of the second disk block.  This is
    175  * needed for multi-arch CD booting where multiple architecture need
    176  * to shove stuff in boot block 0.
    177  */
    178 	.org	0x200		# uVAX booted from disk starts here
    179 
    180 start_uvax:
    181 	movzbl	$2,_C_LABEL(from)	# Booted from subset-VMB
    182 	brb	start_all
    183 
    184 /*
    185  * start_all: stack already at RELOC, we save registers, move ourself
    186  * to RELOC and loads boot.
    187  */
    188 start_all:
    189 	movl	$_C_LABEL(start), %sp	# move stack to a better
    190 	pushr	$0x1fff			# save all regs, used later.
    191 
    192 	subl3	$_C_LABEL(start), $_C_LABEL(edata), %r0
    193 					# get size of text+data (w/o bss)
    194 	moval	_C_LABEL(start), %r1	# get actual base-address of code
    195 	subl3	$_C_LABEL(start), $_C_LABEL(end), %r2
    196 					# get complete size (incl. bss)
    197 	movl	$_C_LABEL(start), %r3	# get relocated base-address of code
    198 	movc5	%r0, (%r1), $0, %r2, (%r3)	# copy code to new location
    199 
    200 	movpsl	-(%sp)
    201 	movl	$relocated, -(%sp)	# return-address on top of stack
    202 	rei				# can be replaced with new address
    203 relocated:				# now relocation is done !!!
    204 	movl	%sp, _C_LABEL(bootregs)
    205 	calls	$0, _C_LABEL(Xmain)	# call Xmain (gcc workaround)which is
    206 	halt				# not intended to return ...
    207 
    208 /*
    209  * hoppabort() is called when jumping to the newly loaded program.
    210  */
    211 ENTRY(hoppabort, 0)
    212 	movl    4(%ap),%r6
    213 	movl	_C_LABEL(rpb),%r11
    214 	mnegl	$1,%ap		# Hack to figure out boot device.
    215 	movpsl	-(%sp)
    216 	pushab	2(%r6)
    217 	mnegl	$1,_C_LABEL(vax_load_failure)
    218 	rei
    219 #	calls	$0,(%r6)
    220 	halt
    221 
    222 ENTRY(unit_init, R6|R7|R8|R9|R10|R11)
    223 	mfpr	$17,%r7			# Wanted bu KDB
    224 	movl	4(%ap),%r0		# init routine address
    225 	movl	8(%ap),%r9		# RPB in %r9
    226 	movl	12(%ap),%r1		# VMB argument list
    227 	callg	(%r1),(%r0)
    228 	ret
    229 
    230 # A bunch of functions unwanted in boot blocks.
    231 ENTRY(getchar, 0)
    232 	halt
    233 
    234 #ifndef USE_PRINTF
    235 ENTRY(putchar, 0)
    236 	ret
    237 
    238 ENTRY(printf, 0)
    239 	ret
    240 #endif
    241 
    242 ENTRY(panic, 0)
    243 	halt
    244