Home | History | Annotate | Line # | Download | only in i2c
      1 /*	$NetBSD: lm75reg.h,v 1.6 2025/08/25 04:31:18 macallan Exp $	*/
      2 
      3 /*
      4  * Copyright (c) 2003 Wasabi Systems, Inc.
      5  * All rights reserved.
      6  *
      7  * Written by Jason R. Thorpe for Wasabi Systems, Inc.
      8  *
      9  * Redistribution and use in source and binary forms, with or without
     10  * modification, are permitted provided that the following conditions
     11  * are met:
     12  * 1. Redistributions of source code must retain the above copyright
     13  *    notice, this list of conditions and the following disclaimer.
     14  * 2. Redistributions in binary form must reproduce the above copyright
     15  *    notice, this list of conditions and the following disclaimer in the
     16  *    documentation and/or other materials provided with the distribution.
     17  * 3. All advertising materials mentioning features or use of this software
     18  *    must display the following acknowledgement:
     19  *      This product includes software developed for the NetBSD Project by
     20  *      Wasabi Systems, Inc.
     21  * 4. The name of Wasabi Systems, Inc. may not be used to endorse
     22  *    or promote products derived from this software without specific prior
     23  *    written permission.
     24  *
     25  * THIS SOFTWARE IS PROVIDED BY WASABI SYSTEMS, INC. ``AS IS'' AND
     26  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     27  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     28  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL WASABI SYSTEMS, INC
     29  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     30  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     31  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     32  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     33  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     34  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     35  * POSSIBILITY OF SUCH DAMAGE.
     36  */
     37 
     38 #ifndef _DEV_I2C_LM75REG_H_
     39 #define _DEV_I2C_LM75REG_H_
     40 
     41 /*
     42  * LM75 temperature sensor I2C address:
     43  *
     44  *	100 1xxx
     45  */
     46 #define	LM75_ADDRMASK		0x3f8
     47 #define	LM75_ADDR		0x48
     48 #define	LM77_ADDRMASK		0x3fc
     49 #define	LM77_ADDR		0x48
     50 
     51 /*
     52  * Temperature on the LM75 is represented by a 9-bit two's complement
     53  * integer in steps of 0.5C.  The following examples are taken from
     54  * the LM75 data sheet:
     55  *
     56  *	+125C	0 1111 1010	0x0fa
     57  *	+25C	0 0011 0010	0x032
     58  *	+0.5C	0 0000 0001	0x001
     59  *	0C	0 0000 0000	0x000
     60  *	-0.5C	1 1111 1111	0x1ff
     61  *	-25C	1 1100 1110	0x1ce
     62  *	-55C	1 1001 0010	0x192
     63  */
     64 
     65 #define	LM75_REG_TEMP			0x00
     66 #define	LM75_REG_CONFIG			0x01
     67 #define	LM75_REG_THYST_SET_POINT	0x02
     68 #define	LM75_REG_TOS_SET_POINT		0x03
     69 #define	LM75_REG_ID			0x07	/* LM75A only */
     70 
     71 #define	LM77_REG_TCRIT_SET_POINT	0x03
     72 #define	LM77_REG_TLOW_SET_POINT		0x04
     73 #define	LM77_REG_THIGH_SET_POINT	0x05
     74 
     75 
     76 #define	LM75_TEMP_LEN			2	/* 2 data bytes */
     77 
     78 #define	LM75_CONFIG_SHUTDOWN		0x01
     79 #define	LM75_CONFIG_CMPINT		0x02
     80 #define	LM75_CONFIG_OSPOLARITY		0x04
     81 #define	LM75_CONFIG_FAULT_QUEUE_1	(0 << 3)
     82 #define	LM75_CONFIG_FAULT_QUEUE_2	(1 << 3)
     83 #define	LM75_CONFIG_FAULT_QUEUE_4	(2 << 3)
     84 #define	LM75_CONFIG_FAULT_QUEUE_6	(3 << 3)
     85 
     86 #define DS75_CONFIG_RES_9BIT		(0 << 5)
     87 #define DS75_CONFIG_RES_10BIT		(1 << 5)
     88 #define DS75_CONFIG_RES_11BIT		(2 << 5)
     89 #define DS75_CONFIG_RES_12BIT		(3 << 5)
     90 
     91 #define	LM77_CONFIG_TCRITAPOLARITY	0x04
     92 #define	LM77_CONFIG_INTPOLARITY		0x08
     93 #define	LM77_CONFIG_FAULT_QUEUE		LM75_CONFIG_FAULT_QUEUE_4
     94 
     95 #endif /* _DEV_I2C_LM75REG_H_ */
     96