Home | History | Annotate | Line # | Download | only in i2c
      1 /* $NetBSD: sy8106a.c,v 1.9 2025/09/17 13:42:43 thorpej Exp $ */
      2 
      3 /*-
      4  * Copyright (c) 2017 Jared McNeill <jmcneill (at) invisible.ca>
      5  * All rights reserved.
      6  *
      7  * Redistribution and use in source and binary forms, with or without
      8  * modification, are permitted provided that the following conditions
      9  * are met:
     10  * 1. Redistributions of source code must retain the above copyright
     11  *    notice, this list of conditions and the following disclaimer.
     12  * 2. Redistributions in binary form must reproduce the above copyright
     13  *    notice, this list of conditions and the following disclaimer in the
     14  *    documentation and/or other materials provided with the distribution.
     15  *
     16  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
     17  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
     18  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
     19  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
     20  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
     21  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
     22  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
     23  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
     24  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
     25  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
     26  * POSSIBILITY OF SUCH DAMAGE.
     27  */
     28 
     29 #include <sys/cdefs.h>
     30 __KERNEL_RCSID(0, "$NetBSD: sy8106a.c,v 1.9 2025/09/17 13:42:43 thorpej Exp $");
     31 
     32 #include <sys/param.h>
     33 #include <sys/systm.h>
     34 #include <sys/kernel.h>
     35 #include <sys/device.h>
     36 #include <sys/conf.h>
     37 #include <sys/bus.h>
     38 #include <sys/kmem.h>
     39 
     40 #include <dev/i2c/i2cvar.h>
     41 
     42 #include <dev/fdt/fdtvar.h>
     43 
     44 #define	VOUT1_SEL		0x01
     45 #define	 SEL_GO			__BIT(7)
     46 #define	 SEL_VOLTAGE		__BITS(6,0)
     47 #define	  SEL_VOLTAGE_BASE	680000	/* uV */
     48 #define	  SEL_VOLTAGE_STEP	10000	/* uV */
     49 #define	VOUT_COM		0x02
     50 #define	 COM_DISABLE		__BIT(0)
     51 #define	SYS_STATUS		0x06
     52 
     53 struct sy8106a_softc {
     54 	device_t	sc_dev;
     55 	i2c_tag_t	sc_i2c;
     56 	i2c_addr_t	sc_addr;
     57 	int		sc_phandle;
     58 
     59 	u_int		sc_ramp_delay;
     60 };
     61 
     62 static const struct device_compatible_entry compat_data[] = {
     63 	{ .compat = "silergy,sy8106a" },
     64 	DEVICE_COMPAT_EOL
     65 };
     66 
     67 static uint8_t
     68 sy8106a_read(struct sy8106a_softc *sc, uint8_t reg, int flags)
     69 {
     70 	uint8_t val = 0;
     71 	int error;
     72 
     73 	error = iic_exec(sc->sc_i2c, I2C_OP_READ_WITH_STOP, sc->sc_addr,
     74 	    &reg, 1, &val, 1, flags);
     75 	if (error != 0)
     76 		aprint_error_dev(sc->sc_dev, "error reading reg %#x: %d\n", reg, error);
     77 
     78 	return val;
     79 }
     80 
     81 static void
     82 sy8106a_write(struct sy8106a_softc *sc, uint8_t reg, uint8_t val, int flags)
     83 {
     84 	uint8_t buf[2];
     85 	int error;
     86 
     87 	buf[0] = reg;
     88 	buf[1] = val;
     89 
     90 	error = iic_exec(sc->sc_i2c, I2C_OP_WRITE_WITH_STOP, sc->sc_addr,
     91 	    NULL, 0, buf, 2, flags);
     92 	if (error != 0)
     93 		aprint_error_dev(sc->sc_dev, "error writing reg %#x: %d\n", reg, error);
     94 }
     95 
     96 #define	I2C_READ(sc, reg)	sy8106a_read((sc), (reg), 0)
     97 #define	I2C_WRITE(sc, reg, val)	sy8106a_write((sc), (reg), (val), 0)
     98 #define	I2C_LOCK(sc)		iic_acquire_bus((sc)->sc_i2c, 0)
     99 #define	I2C_UNLOCK(sc)		iic_release_bus((sc)->sc_i2c, 0)
    100 
    101 static int
    102 sy8106a_acquire(device_t dev)
    103 {
    104 	return 0;
    105 }
    106 
    107 static void
    108 sy8106a_release(device_t dev)
    109 {
    110 }
    111 
    112 static int
    113 sy8106a_enable(device_t dev, bool enable)
    114 {
    115 	struct sy8106a_softc * const sc = device_private(dev);
    116 	uint8_t val;
    117 
    118 	I2C_LOCK(sc);
    119 	val = I2C_READ(sc, VOUT_COM);
    120 	if (enable)
    121 		val &= ~COM_DISABLE;
    122 	else
    123 		val |= COM_DISABLE;
    124 	I2C_WRITE(sc, VOUT_COM, val);
    125 	I2C_UNLOCK(sc);
    126 
    127 	if (sc->sc_ramp_delay)
    128 		delay(sc->sc_ramp_delay);
    129 
    130 	return 0;
    131 }
    132 
    133 static int
    134 sy8106a_set_voltage(device_t dev, u_int min_uvol, u_int max_uvol)
    135 {
    136 	struct sy8106a_softc * const sc = device_private(dev);
    137 	uint8_t val, oval;
    138 	u_int cur_uvol;
    139 
    140 	I2C_LOCK(sc);
    141 
    142 	/* Get current voltage */
    143 	oval = I2C_READ(sc, VOUT1_SEL);
    144 	cur_uvol = __SHIFTOUT(oval, SEL_VOLTAGE) * SEL_VOLTAGE_STEP +
    145 	    SEL_VOLTAGE_BASE;
    146 
    147 	/* Set new voltage */
    148 	val = SEL_GO | ((min_uvol - SEL_VOLTAGE_BASE) / SEL_VOLTAGE_STEP);
    149 	I2C_WRITE(sc, VOUT1_SEL, val);
    150 
    151 	I2C_UNLOCK(sc);
    152 
    153 	/* Time to delay is based on the number of voltage steps */
    154 	if (sc->sc_ramp_delay)
    155 		delay((abs(cur_uvol - min_uvol) / SEL_VOLTAGE_STEP) * sc->sc_ramp_delay);
    156 
    157 	return 0;
    158 }
    159 
    160 static int
    161 sy8106a_get_voltage(device_t dev, u_int *puvol)
    162 {
    163 	struct sy8106a_softc * const sc = device_private(dev);
    164 	uint8_t val;
    165 
    166 	I2C_LOCK(sc);
    167 	val = I2C_READ(sc, VOUT1_SEL);
    168 	I2C_UNLOCK(sc);
    169 
    170 	*puvol = __SHIFTOUT(val, SEL_VOLTAGE) * SEL_VOLTAGE_STEP +
    171 	    SEL_VOLTAGE_BASE;
    172 
    173 	return 0;
    174 }
    175 
    176 static struct fdtbus_regulator_controller_func sy8106a_funcs = {
    177 	.acquire = sy8106a_acquire,
    178 	.release = sy8106a_release,
    179 	.enable = sy8106a_enable,
    180 	.set_voltage = sy8106a_set_voltage,
    181 	.get_voltage = sy8106a_get_voltage,
    182 };
    183 
    184 static int
    185 sy8106a_match(device_t parent, cfdata_t match, void *aux)
    186 {
    187 	struct i2c_attach_args *ia = aux;
    188 	int match_result;
    189 
    190 	if (iic_use_direct_match(ia, match, compat_data, &match_result))
    191 		return match_result;
    192 
    193 	return 0;
    194 }
    195 
    196 static void
    197 sy8106a_attach(device_t parent, device_t self, void *aux)
    198 {
    199 	struct sy8106a_softc * const sc = device_private(self);
    200 	struct i2c_attach_args *ia = aux;
    201 
    202 	sc->sc_dev = self;
    203 	sc->sc_i2c = ia->ia_tag;
    204 	sc->sc_addr = ia->ia_addr;
    205 	sc->sc_phandle = devhandle_to_of(device_handle(self));
    206 
    207 	aprint_naive("\n");
    208 	aprint_normal(": Silergy SY8106A regulator\n");
    209 
    210 	of_getprop_uint32(sc->sc_phandle, "regulator-ramp-delay",
    211 	    &sc->sc_ramp_delay);
    212 
    213 	fdtbus_register_regulator_controller(self, sc->sc_phandle,
    214 	    &sy8106a_funcs);
    215 }
    216 
    217 CFATTACH_DECL_NEW(sy8106a, sizeof(struct sy8106a_softc),
    218     sy8106a_match, sy8106a_attach, NULL, NULL);
    219