Home | History | Annotate | Line # | Download | only in isa
      1 /*	$NetBSD: if_cs_isa.c,v 1.27 2015/04/13 16:33:24 riastradh Exp $	*/
      2 
      3 /*
      4  * Copyright 1997
      5  * Digital Equipment Corporation. All rights reserved.
      6  *
      7  * This software is furnished under license and may be used and
      8  * copied only in accordance with the following terms and conditions.
      9  * Subject to these conditions, you may download, copy, install,
     10  * use, modify and distribute this software in source and/or binary
     11  * form. No title or ownership is transferred hereby.
     12  *
     13  * 1) Any source code used, modified or distributed must reproduce
     14  *    and retain this copyright notice and list of conditions as
     15  *    they appear in the source file.
     16  *
     17  * 2) No right is granted to use any trade name, trademark, or logo of
     18  *    Digital Equipment Corporation. Neither the "Digital Equipment
     19  *    Corporation" name nor any trademark or logo of Digital Equipment
     20  *    Corporation may be used to endorse or promote products derived
     21  *    from this software without the prior written permission of
     22  *    Digital Equipment Corporation.
     23  *
     24  * 3) This software is provided "AS-IS" and any express or implied
     25  *    warranties, including but not limited to, any implied warranties
     26  *    of merchantability, fitness for a particular purpose, or
     27  *    non-infringement are disclaimed. In no event shall DIGITAL be
     28  *    liable for any damages whatsoever, and in particular, DIGITAL
     29  *    shall not be liable for special, indirect, consequential, or
     30  *    incidental damages or damages for lost profits, loss of
     31  *    revenue or loss of use, whether such damages arise in contract,
     32  *    negligence, tort, under statute, in equity, at law or otherwise,
     33  *    even if advised of the possibility of such damage.
     34  */
     35 
     36 #include <sys/cdefs.h>
     37 __KERNEL_RCSID(0, "$NetBSD: if_cs_isa.c,v 1.27 2015/04/13 16:33:24 riastradh Exp $");
     38 
     39 #include <sys/param.h>
     40 #include <sys/systm.h>
     41 #include <sys/socket.h>
     42 #include <sys/device.h>
     43 
     44 #include <net/if.h>
     45 #include <net/if_ether.h>
     46 #include <net/if_media.h>
     47 
     48 #include <sys/bus.h>
     49 #include <sys/intr.h>
     50 
     51 #include <dev/isa/isareg.h>
     52 #include <dev/isa/isavar.h>
     53 #include <dev/isa/isadmavar.h>
     54 
     55 #include <dev/ic/cs89x0reg.h>
     56 #include <dev/ic/cs89x0var.h>
     57 #include <dev/isa/cs89x0isavar.h>
     58 
     59 static int	cs_isa_probe(device_t, cfdata_t, void *);
     60 static void	cs_isa_attach(device_t, device_t, void *);
     61 
     62 CFATTACH_DECL_NEW(cs_isa, sizeof(struct cs_softc_isa),
     63     cs_isa_probe, cs_isa_attach, NULL, NULL);
     64 
     65 int
     66 cs_isa_probe(device_t parent, cfdata_t cf, void *aux)
     67 {
     68 	struct isa_attach_args *ia = aux;
     69 	bus_space_tag_t iot = ia->ia_iot;
     70 	bus_space_tag_t memt = ia->ia_memt;
     71 	bus_space_handle_t ioh, memh;
     72 	struct cs_softc sc;
     73 	int rv = 0, have_io = 0, have_mem = 0;
     74 	u_int16_t isa_cfg, isa_membase;
     75 	int maddr, irq;
     76 
     77 	if (ia->ia_nio < 1)
     78 		return (0);
     79 	if (ia->ia_nirq < 1)
     80 		return (0);
     81 
     82 	if (ISA_DIRECT_CONFIG(ia))
     83 		return (0);
     84 
     85 	/*
     86 	 * Disallow wildcarded I/O base.
     87 	 */
     88 	if (ia->ia_io[0].ir_addr == ISA_UNKNOWN_PORT)
     89 		return (0);
     90 
     91 	if (ia->ia_niomem > 0)
     92 		maddr = ia->ia_iomem[0].ir_addr;
     93 	else
     94 		maddr = ISA_UNKNOWN_IOMEM;
     95 
     96 	/*
     97 	 * Map the I/O space.
     98 	 */
     99 	if (bus_space_map(ia->ia_iot, ia->ia_io[0].ir_addr, CS8900_IOSIZE,
    100 	    0, &ioh))
    101 		goto out;
    102 	have_io = 1;
    103 
    104 	memset(&sc, 0, sizeof sc);
    105 	sc.sc_iot = iot;
    106 	sc.sc_ioh = ioh;
    107 	/* Verify that it's a Crystal product. */
    108 	if (CS_READ_PACKET_PAGE_IO(&sc, PKTPG_EISA_NUM) !=
    109 	    EISA_NUM_CRYSTAL)
    110 		goto out;
    111 
    112 	/*
    113 	 * Verify that it's a supported chip.
    114 	 */
    115 	switch (CS_READ_PACKET_PAGE_IO(&sc, PKTPG_PRODUCT_ID) &
    116 	    PROD_ID_MASK) {
    117 	case PROD_ID_CS8900:
    118 #ifdef notyet
    119 	case PROD_ID_CS8920:
    120 	case PROD_ID_CS8920M:
    121 #endif
    122 		break;
    123 	default:
    124 		/* invalid product ID */
    125 		goto out;
    126 	}
    127 
    128 	/*
    129 	 * If the IRQ or memory address were not specified, read the
    130 	 * ISA_CFG EEPROM location.
    131 	 */
    132 	if (maddr == ISA_UNKNOWN_IOMEM ||
    133 	    ia->ia_irq[0].ir_irq == ISA_UNKNOWN_IRQ) {
    134 		if (cs_verify_eeprom(&sc) == CS_ERROR) {
    135 			printf("cs_isa_probe: EEPROM bad or missing\n");
    136 			goto out;
    137 		}
    138 		if (cs_read_eeprom(&sc, EEPROM_ISA_CFG, &isa_cfg)
    139 		    == CS_ERROR) {
    140 			printf("cs_isa_probe: unable to read ISA_CFG\n");
    141 			goto out;
    142 		}
    143 	}
    144 
    145 	/*
    146 	 * If the IRQ wasn't specified, get it from the EEPROM.
    147 	 */
    148 	if (ia->ia_irq[0].ir_irq == ISA_UNKNOWN_IRQ) {
    149 		irq = isa_cfg & ISA_CFG_IRQ_MASK;
    150 		if (irq == 3)
    151 			irq = 5;
    152 		else
    153 			irq += 10;
    154 	} else
    155 		irq = ia->ia_irq[0].ir_irq;
    156 
    157 	/*
    158 	 * If the memory address wasn't specified, get it from the EEPROM.
    159 	 */
    160 	if (maddr == ISA_UNKNOWN_IOMEM) {
    161 		if ((isa_cfg & ISA_CFG_MEM_MODE) == 0) {
    162 			/* EEPROM says don't use memory mode. */
    163 			goto out;
    164 		}
    165 		if (cs_read_eeprom(&sc, EEPROM_MEM_BASE, &isa_membase)
    166 		    == CS_ERROR) {
    167 			printf("cs_isa_probe: unable to read MEM_BASE\n");
    168 			goto out;
    169 		}
    170 
    171 		isa_membase &= MEM_BASE_MASK;
    172 		maddr = (int)isa_membase << 8;
    173 	}
    174 
    175 	/*
    176 	 * We now have a valid mem address; attempt to map it.
    177 	 */
    178 	if (bus_space_map(ia->ia_memt, maddr, CS8900_MEMSIZE, 0, &memh)) {
    179 		/* Can't map it; fall back on i/o-only mode. */
    180 		printf("cs_isa_probe: unable to map memory space\n");
    181 		maddr = ISA_UNKNOWN_IOMEM;
    182 	} else
    183 		have_mem = 1;
    184 
    185 	ia->ia_nio = 1;
    186 	ia->ia_io[0].ir_size = CS8900_IOSIZE;
    187 
    188 	if (maddr == ISA_UNKNOWN_IOMEM)
    189 		ia->ia_niomem = 0;
    190 	else {
    191 		ia->ia_niomem = 1;
    192 		ia->ia_iomem[0].ir_addr = maddr;
    193 		ia->ia_iomem[0].ir_size = CS8900_MEMSIZE;
    194 	}
    195 
    196 	ia->ia_nirq = 1;
    197 	ia->ia_irq[0].ir_irq = irq;
    198 
    199 	rv = 1;
    200 
    201  out:
    202 	if (have_io)
    203 		bus_space_unmap(iot, ioh, CS8900_IOSIZE);
    204 	if (have_mem)
    205 		bus_space_unmap(memt, memh, CS8900_MEMSIZE);
    206 
    207 	return (rv);
    208 }
    209 
    210 void
    211 cs_isa_attach(device_t parent, device_t self, void *aux)
    212 {
    213 	struct cs_softc_isa *isc = device_private(self);
    214 	struct cs_softc *sc = &isc->sc_cs;
    215 	struct isa_attach_args *ia = aux;
    216 
    217 	sc->sc_dev = self;
    218 	isc->sc_ic = ia->ia_ic;
    219 	sc->sc_iot = ia->ia_iot;
    220 	sc->sc_memt = ia->ia_memt;
    221 
    222 	if (ia->ia_ndrq > 0)
    223 		isc->sc_drq = ia->ia_drq[0].ir_drq;
    224 	else
    225 		isc->sc_drq = -1;
    226 
    227 	sc->sc_irq = ia->ia_irq[0].ir_irq;
    228 
    229 	printf("\n");
    230 
    231 	/*
    232 	 * Map the device.
    233 	 */
    234 	if (bus_space_map(sc->sc_iot, ia->ia_io[0].ir_addr, CS8900_IOSIZE,
    235 	    0, &sc->sc_ioh)) {
    236 		aprint_error_dev(self, "unable to map i/o space\n");
    237 		return;
    238 	}
    239 
    240 	/*
    241 	 * Validate IRQ.
    242 	 */
    243 	if (CS8900_IRQ_ISVALID(sc->sc_irq) == 0) {
    244 		aprint_error_dev(self, "invalid IRQ %d\n", sc->sc_irq);
    245 		return;
    246 	}
    247 
    248 	/*
    249 	 * Map the memory space if it was specified.  If we can do this,
    250 	 * we set ourselves up to use memory mode forever.  Otherwise,
    251 	 * we fall back on I/O mode.
    252 	 */
    253 	if (ia->ia_iomem[0].ir_addr != ISA_UNKNOWN_IOMEM &&
    254 	    ia->ia_iomem[0].ir_size == CS8900_MEMSIZE &&
    255 	    CS8900_MEMBASE_ISVALID(ia->ia_iomem[0].ir_addr)) {
    256 		if (bus_space_map(sc->sc_memt, ia->ia_iomem[0].ir_addr,
    257 		    CS8900_MEMSIZE, 0, &sc->sc_memh)) {
    258 			aprint_error_dev(self, "unable to map memory space\n");
    259 		} else {
    260 			sc->sc_cfgflags |= CFGFLG_MEM_MODE;
    261 			sc->sc_pktpgaddr = ia->ia_iomem[0].ir_addr;
    262 		}
    263 	}
    264 
    265 	sc->sc_ih = isa_intr_establish(ia->ia_ic, sc->sc_irq, IST_EDGE,
    266 	    IPL_NET, cs_intr, sc);
    267 	if (sc->sc_ih == NULL) {
    268 		aprint_error_dev(self, "unable to establish interrupt\n");
    269 		return;
    270 	}
    271 
    272 	sc->sc_dma_chipinit = cs_isa_dma_chipinit;
    273 	sc->sc_dma_attach = cs_isa_dma_attach;
    274 	sc->sc_dma_process_rx = cs_process_rx_dma;
    275 
    276 	cs_attach(sc, NULL, NULL, 0, 0);
    277 }
    278