1 /* $NetBSD: if_egreg.h,v 1.5 2005/12/11 12:22:02 christos Exp $ */ 2 3 /* 4 * Copyright (c) 1993 Dean Huxley (dean (at) fsa.ca) 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above copyright 13 * notice, this list of conditions and the following disclaimer in the 14 * documentation and/or other materials provided with the distribution. 15 * 3. All advertising materials mentioning features or use of this software 16 * must display the following acknowledgement: 17 * This product includes software developed by Dean Huxley. 18 * 4. The name of Dean Huxley may not be used to endorse or promote products 19 * derived from this software without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 22 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 23 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 24 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 25 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 26 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 27 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 29 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 30 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 31 */ 32 33 /* 34 * Register offsets from base. 35 */ 36 #define EG_COMMAND 0x00 37 #define EG_STATUS 0x02 38 #define EG_DATA 0x04 39 #define EG_CONTROL 0x06 40 41 /* 42 * Host Control Register bits 43 * EG_CTL_ATTN - does a soft reset 44 * EG_CTL_FLSH - flushes the data register 45 * EG_CTL_RESET - does a hard reset 46 * EG_CTL_DMAE - Used with DIR bit, enables DMA transfers to/from data reg. 47 * EG_CTL_DIR - if clear then host -> adapter, if set then adapter -> host 48 * EG_CTL_TCEN - terminal count enable. enables host interrupt after DMA. 49 * EG_CTL_CMDE - command reg interrupt enable. (when it is written) 50 * EG_CTL_HSF1 - Host status flag 1 51 * EG_CTL_HSF2 - Host status flag 2 52 */ 53 54 #define EG_CTL_ATTN 0x80 55 #define EG_CTL_FLSH 0x40 56 #define EG_CTL_RESET (EG_CTL_ATTN|EG_CTL_FLSH) 57 #define EG_CTL_DMAE 0x20 58 #define EG_CTL_DIR 0x10 59 #define EG_CTL_TCEN 0x08 60 #define EG_CTL_CMDE 0x04 61 #define EG_CTL_HSF2 0x02 62 #define EG_CTL_HSF1 0x01 63 64 /* 65 * Host Status Register bits 66 * EG_STAT_HRDY - Data Register ready 67 * EG_STAT_HCRE - Host Command Register empty 68 * EG_STAT_ACRF - Adapter Command register full 69 * EG_STAT_DIR - Direction flag, 0 = host -> adapter, 1 = adapter -> host 70 * EG_STAT_DONE - DMA done 71 * EG_STAT_ASF1 - Adapter status flag 1 72 * EG_STAT_ASF2 - Adapter status flag 2 73 * EG_STAT_ASF3 - Adapter status flag 3 74 */ 75 76 #define EG_STAT_HRDY 0x80 77 #define EG_STAT_HCRE 0x40 78 #define EG_STAT_ACRF 0x20 79 #define EG_STAT_DIR 0x10 80 #define EG_STAT_DONE 0x08 81 #define EG_STAT_ASF3 0x04 82 #define EG_STAT_ASF2 0x02 83 #define EG_STAT_ASF1 0x01 84 85 #define EG_PCB_NULL 0x00 86 #define EG_PCB_ACCEPT 0x01 87 #define EG_PCB_REJECT 0x02 88 #define EG_PCB_DONE 0x03 89 #define EG_PCB_STAT 0x03 90 91 #define EG_CMD_CONFIG82586 0x02 92 #define EG_CMD_GETEADDR 0x03 93 #define EG_CMD_RECVPACKET 0x08 94 #define EG_CMD_SENDPACKET 0x09 95 #define EG_CMD_GETSTATS 0x0a 96 #define EG_CMD_SETEADDR 0x10 97 #define EG_CMD_GETINFO 0x11 98 99 #define EG_RSP_CONFIG82586 0x32 100 #define EG_RSP_GETEADDR 0x33 101 #define EG_RSP_RECVPACKET 0x38 102 #define EG_RSP_SENDPACKET 0x39 103 #define EG_RSP_GETSTATS 0x3a 104 #define EG_RSP_SETEADDR 0x40 105 #define EG_RSP_GETINFO 0x41 106
Indexes created Mon Sep 22 13:09:51 GMT 2025