ixgbe_x550.c revision 1.7.2.2
1 1.7.2.2 jdolecek /****************************************************************************** 2 1.7.2.2 jdolecek 3 1.7.2.2 jdolecek Copyright (c) 2001-2017, Intel Corporation 4 1.7.2.2 jdolecek All rights reserved. 5 1.7.2.2 jdolecek 6 1.7.2.2 jdolecek Redistribution and use in source and binary forms, with or without 7 1.7.2.2 jdolecek modification, are permitted provided that the following conditions are met: 8 1.7.2.2 jdolecek 9 1.7.2.2 jdolecek 1. Redistributions of source code must retain the above copyright notice, 10 1.7.2.2 jdolecek this list of conditions and the following disclaimer. 11 1.7.2.2 jdolecek 12 1.7.2.2 jdolecek 2. Redistributions in binary form must reproduce the above copyright 13 1.7.2.2 jdolecek notice, this list of conditions and the following disclaimer in the 14 1.7.2.2 jdolecek documentation and/or other materials provided with the distribution. 15 1.7.2.2 jdolecek 16 1.7.2.2 jdolecek 3. Neither the name of the Intel Corporation nor the names of its 17 1.7.2.2 jdolecek contributors may be used to endorse or promote products derived from 18 1.7.2.2 jdolecek this software without specific prior written permission. 19 1.7.2.2 jdolecek 20 1.7.2.2 jdolecek THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" 21 1.7.2.2 jdolecek AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 1.7.2.2 jdolecek IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 1.7.2.2 jdolecek ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 24 1.7.2.2 jdolecek LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 1.7.2.2 jdolecek CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 1.7.2.2 jdolecek SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 1.7.2.2 jdolecek INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 1.7.2.2 jdolecek CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 1.7.2.2 jdolecek ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 30 1.7.2.2 jdolecek POSSIBILITY OF SUCH DAMAGE. 31 1.7.2.2 jdolecek 32 1.7.2.2 jdolecek ******************************************************************************/ 33 1.7.2.2 jdolecek /*$FreeBSD: head/sys/dev/ixgbe/ixgbe_x550.c 320688 2017-07-05 17:27:03Z erj $*/ 34 1.7.2.2 jdolecek 35 1.7.2.2 jdolecek #include "ixgbe_x550.h" 36 1.7.2.2 jdolecek #include "ixgbe_x540.h" 37 1.7.2.2 jdolecek #include "ixgbe_type.h" 38 1.7.2.2 jdolecek #include "ixgbe_api.h" 39 1.7.2.2 jdolecek #include "ixgbe_common.h" 40 1.7.2.2 jdolecek #include "ixgbe_phy.h" 41 1.7.2.2 jdolecek #include <dev/mii/mii.h> 42 1.7.2.2 jdolecek 43 1.7.2.2 jdolecek static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed); 44 1.7.2.2 jdolecek static s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *, u32 mask); 45 1.7.2.2 jdolecek static void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *, u32 mask); 46 1.7.2.2 jdolecek static s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw); 47 1.7.2.2 jdolecek 48 1.7.2.2 jdolecek /** 49 1.7.2.2 jdolecek * ixgbe_init_ops_X550 - Inits func ptrs and MAC type 50 1.7.2.2 jdolecek * @hw: pointer to hardware structure 51 1.7.2.2 jdolecek * 52 1.7.2.2 jdolecek * Initialize the function pointers and assign the MAC type for X550. 53 1.7.2.2 jdolecek * Does not touch the hardware. 54 1.7.2.2 jdolecek **/ 55 1.7.2.2 jdolecek s32 ixgbe_init_ops_X550(struct ixgbe_hw *hw) 56 1.7.2.2 jdolecek { 57 1.7.2.2 jdolecek struct ixgbe_mac_info *mac = &hw->mac; 58 1.7.2.2 jdolecek struct ixgbe_eeprom_info *eeprom = &hw->eeprom; 59 1.7.2.2 jdolecek s32 ret_val; 60 1.7.2.2 jdolecek 61 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_init_ops_X550"); 62 1.7.2.2 jdolecek 63 1.7.2.2 jdolecek ret_val = ixgbe_init_ops_X540(hw); 64 1.7.2.2 jdolecek mac->ops.dmac_config = ixgbe_dmac_config_X550; 65 1.7.2.2 jdolecek mac->ops.dmac_config_tcs = ixgbe_dmac_config_tcs_X550; 66 1.7.2.2 jdolecek mac->ops.dmac_update_tcs = ixgbe_dmac_update_tcs_X550; 67 1.7.2.2 jdolecek mac->ops.setup_eee = NULL; 68 1.7.2.2 jdolecek mac->ops.set_source_address_pruning = 69 1.7.2.2 jdolecek ixgbe_set_source_address_pruning_X550; 70 1.7.2.2 jdolecek mac->ops.set_ethertype_anti_spoofing = 71 1.7.2.2 jdolecek ixgbe_set_ethertype_anti_spoofing_X550; 72 1.7.2.2 jdolecek 73 1.7.2.2 jdolecek mac->ops.get_rtrup2tc = ixgbe_dcb_get_rtrup2tc_generic; 74 1.7.2.2 jdolecek eeprom->ops.init_params = ixgbe_init_eeprom_params_X550; 75 1.7.2.2 jdolecek eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550; 76 1.7.2.2 jdolecek eeprom->ops.read = ixgbe_read_ee_hostif_X550; 77 1.7.2.2 jdolecek eeprom->ops.read_buffer = ixgbe_read_ee_hostif_buffer_X550; 78 1.7.2.2 jdolecek eeprom->ops.write = ixgbe_write_ee_hostif_X550; 79 1.7.2.2 jdolecek eeprom->ops.write_buffer = ixgbe_write_ee_hostif_buffer_X550; 80 1.7.2.2 jdolecek eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550; 81 1.7.2.2 jdolecek eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550; 82 1.7.2.2 jdolecek 83 1.7.2.2 jdolecek mac->ops.disable_mdd = ixgbe_disable_mdd_X550; 84 1.7.2.2 jdolecek mac->ops.enable_mdd = ixgbe_enable_mdd_X550; 85 1.7.2.2 jdolecek mac->ops.mdd_event = ixgbe_mdd_event_X550; 86 1.7.2.2 jdolecek mac->ops.restore_mdd_vf = ixgbe_restore_mdd_vf_X550; 87 1.7.2.2 jdolecek mac->ops.disable_rx = ixgbe_disable_rx_x550; 88 1.7.2.2 jdolecek /* Manageability interface */ 89 1.7.2.2 jdolecek mac->ops.set_fw_drv_ver = ixgbe_set_fw_drv_ver_x550; 90 1.7.2.2 jdolecek switch (hw->device_id) { 91 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_1G_T: 92 1.7.2.2 jdolecek hw->mac.ops.led_on = NULL; 93 1.7.2.2 jdolecek hw->mac.ops.led_off = NULL; 94 1.7.2.2 jdolecek break; 95 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_10G_T: 96 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_10G_T: 97 1.7.2.2 jdolecek hw->mac.ops.led_on = ixgbe_led_on_t_X550em; 98 1.7.2.2 jdolecek hw->mac.ops.led_off = ixgbe_led_off_t_X550em; 99 1.7.2.2 jdolecek break; 100 1.7.2.2 jdolecek default: 101 1.7.2.2 jdolecek break; 102 1.7.2.2 jdolecek } 103 1.7.2.2 jdolecek return ret_val; 104 1.7.2.2 jdolecek } 105 1.7.2.2 jdolecek 106 1.7.2.2 jdolecek /** 107 1.7.2.2 jdolecek * ixgbe_read_cs4227 - Read CS4227 register 108 1.7.2.2 jdolecek * @hw: pointer to hardware structure 109 1.7.2.2 jdolecek * @reg: register number to write 110 1.7.2.2 jdolecek * @value: pointer to receive value read 111 1.7.2.2 jdolecek * 112 1.7.2.2 jdolecek * Returns status code 113 1.7.2.2 jdolecek **/ 114 1.7.2.2 jdolecek static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value) 115 1.7.2.2 jdolecek { 116 1.7.2.2 jdolecek return hw->link.ops.read_link_unlocked(hw, hw->link.addr, reg, value); 117 1.7.2.2 jdolecek } 118 1.7.2.2 jdolecek 119 1.7.2.2 jdolecek /** 120 1.7.2.2 jdolecek * ixgbe_write_cs4227 - Write CS4227 register 121 1.7.2.2 jdolecek * @hw: pointer to hardware structure 122 1.7.2.2 jdolecek * @reg: register number to write 123 1.7.2.2 jdolecek * @value: value to write to register 124 1.7.2.2 jdolecek * 125 1.7.2.2 jdolecek * Returns status code 126 1.7.2.2 jdolecek **/ 127 1.7.2.2 jdolecek static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value) 128 1.7.2.2 jdolecek { 129 1.7.2.2 jdolecek return hw->link.ops.write_link_unlocked(hw, hw->link.addr, reg, value); 130 1.7.2.2 jdolecek } 131 1.7.2.2 jdolecek 132 1.7.2.2 jdolecek /** 133 1.7.2.2 jdolecek * ixgbe_read_pe - Read register from port expander 134 1.7.2.2 jdolecek * @hw: pointer to hardware structure 135 1.7.2.2 jdolecek * @reg: register number to read 136 1.7.2.2 jdolecek * @value: pointer to receive read value 137 1.7.2.2 jdolecek * 138 1.7.2.2 jdolecek * Returns status code 139 1.7.2.2 jdolecek **/ 140 1.7.2.2 jdolecek static s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value) 141 1.7.2.2 jdolecek { 142 1.7.2.2 jdolecek s32 status; 143 1.7.2.2 jdolecek 144 1.7.2.2 jdolecek status = ixgbe_read_i2c_byte_unlocked(hw, reg, IXGBE_PE, value); 145 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 146 1.7.2.2 jdolecek ERROR_REPORT2(IXGBE_ERROR_CAUTION, 147 1.7.2.2 jdolecek "port expander access failed with %d\n", status); 148 1.7.2.2 jdolecek return status; 149 1.7.2.2 jdolecek } 150 1.7.2.2 jdolecek 151 1.7.2.2 jdolecek /** 152 1.7.2.2 jdolecek * ixgbe_write_pe - Write register to port expander 153 1.7.2.2 jdolecek * @hw: pointer to hardware structure 154 1.7.2.2 jdolecek * @reg: register number to write 155 1.7.2.2 jdolecek * @value: value to write 156 1.7.2.2 jdolecek * 157 1.7.2.2 jdolecek * Returns status code 158 1.7.2.2 jdolecek **/ 159 1.7.2.2 jdolecek static s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value) 160 1.7.2.2 jdolecek { 161 1.7.2.2 jdolecek s32 status; 162 1.7.2.2 jdolecek 163 1.7.2.2 jdolecek status = ixgbe_write_i2c_byte_unlocked(hw, reg, IXGBE_PE, value); 164 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 165 1.7.2.2 jdolecek ERROR_REPORT2(IXGBE_ERROR_CAUTION, 166 1.7.2.2 jdolecek "port expander access failed with %d\n", status); 167 1.7.2.2 jdolecek return status; 168 1.7.2.2 jdolecek } 169 1.7.2.2 jdolecek 170 1.7.2.2 jdolecek /** 171 1.7.2.2 jdolecek * ixgbe_reset_cs4227 - Reset CS4227 using port expander 172 1.7.2.2 jdolecek * @hw: pointer to hardware structure 173 1.7.2.2 jdolecek * 174 1.7.2.2 jdolecek * This function assumes that the caller has acquired the proper semaphore. 175 1.7.2.2 jdolecek * Returns error code 176 1.7.2.2 jdolecek **/ 177 1.7.2.2 jdolecek static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) 178 1.7.2.2 jdolecek { 179 1.7.2.2 jdolecek s32 status; 180 1.7.2.2 jdolecek u32 retry; 181 1.7.2.2 jdolecek u16 value; 182 1.7.2.2 jdolecek u8 reg; 183 1.7.2.2 jdolecek 184 1.7.2.2 jdolecek /* Trigger hard reset. */ 185 1.7.2.2 jdolecek status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); 186 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 187 1.7.2.2 jdolecek return status; 188 1.7.2.2 jdolecek reg |= IXGBE_PE_BIT1; 189 1.7.2.2 jdolecek status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); 190 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 191 1.7.2.2 jdolecek return status; 192 1.7.2.2 jdolecek 193 1.7.2.2 jdolecek status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®); 194 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 195 1.7.2.2 jdolecek return status; 196 1.7.2.2 jdolecek reg &= ~IXGBE_PE_BIT1; 197 1.7.2.2 jdolecek status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg); 198 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 199 1.7.2.2 jdolecek return status; 200 1.7.2.2 jdolecek 201 1.7.2.2 jdolecek status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); 202 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 203 1.7.2.2 jdolecek return status; 204 1.7.2.2 jdolecek reg &= ~IXGBE_PE_BIT1; 205 1.7.2.2 jdolecek status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); 206 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 207 1.7.2.2 jdolecek return status; 208 1.7.2.2 jdolecek 209 1.7.2.2 jdolecek usec_delay(IXGBE_CS4227_RESET_HOLD); 210 1.7.2.2 jdolecek 211 1.7.2.2 jdolecek status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); 212 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 213 1.7.2.2 jdolecek return status; 214 1.7.2.2 jdolecek reg |= IXGBE_PE_BIT1; 215 1.7.2.2 jdolecek status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); 216 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 217 1.7.2.2 jdolecek return status; 218 1.7.2.2 jdolecek 219 1.7.2.2 jdolecek /* Wait for the reset to complete. */ 220 1.7.2.2 jdolecek msec_delay(IXGBE_CS4227_RESET_DELAY); 221 1.7.2.2 jdolecek for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { 222 1.7.2.2 jdolecek status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS, 223 1.7.2.2 jdolecek &value); 224 1.7.2.2 jdolecek if (status == IXGBE_SUCCESS && 225 1.7.2.2 jdolecek value == IXGBE_CS4227_EEPROM_LOAD_OK) 226 1.7.2.2 jdolecek break; 227 1.7.2.2 jdolecek msec_delay(IXGBE_CS4227_CHECK_DELAY); 228 1.7.2.2 jdolecek } 229 1.7.2.2 jdolecek if (retry == IXGBE_CS4227_RETRIES) { 230 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE, 231 1.7.2.2 jdolecek "CS4227 reset did not complete."); 232 1.7.2.2 jdolecek return IXGBE_ERR_PHY; 233 1.7.2.2 jdolecek } 234 1.7.2.2 jdolecek 235 1.7.2.2 jdolecek status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value); 236 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS || 237 1.7.2.2 jdolecek !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) { 238 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE, 239 1.7.2.2 jdolecek "CS4227 EEPROM did not load successfully."); 240 1.7.2.2 jdolecek return IXGBE_ERR_PHY; 241 1.7.2.2 jdolecek } 242 1.7.2.2 jdolecek 243 1.7.2.2 jdolecek return IXGBE_SUCCESS; 244 1.7.2.2 jdolecek } 245 1.7.2.2 jdolecek 246 1.7.2.2 jdolecek /** 247 1.7.2.2 jdolecek * ixgbe_check_cs4227 - Check CS4227 and reset as needed 248 1.7.2.2 jdolecek * @hw: pointer to hardware structure 249 1.7.2.2 jdolecek **/ 250 1.7.2.2 jdolecek static void ixgbe_check_cs4227(struct ixgbe_hw *hw) 251 1.7.2.2 jdolecek { 252 1.7.2.2 jdolecek s32 status = IXGBE_SUCCESS; 253 1.7.2.2 jdolecek u32 swfw_mask = hw->phy.phy_semaphore_mask; 254 1.7.2.2 jdolecek u16 value = 0; 255 1.7.2.2 jdolecek u8 retry; 256 1.7.2.2 jdolecek 257 1.7.2.2 jdolecek for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { 258 1.7.2.2 jdolecek status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); 259 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) { 260 1.7.2.2 jdolecek ERROR_REPORT2(IXGBE_ERROR_CAUTION, 261 1.7.2.2 jdolecek "semaphore failed with %d", status); 262 1.7.2.2 jdolecek msec_delay(IXGBE_CS4227_CHECK_DELAY); 263 1.7.2.2 jdolecek continue; 264 1.7.2.2 jdolecek } 265 1.7.2.2 jdolecek 266 1.7.2.2 jdolecek /* Get status of reset flow. */ 267 1.7.2.2 jdolecek status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); 268 1.7.2.2 jdolecek 269 1.7.2.2 jdolecek if (status == IXGBE_SUCCESS && 270 1.7.2.2 jdolecek value == IXGBE_CS4227_RESET_COMPLETE) 271 1.7.2.2 jdolecek goto out; 272 1.7.2.2 jdolecek 273 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS || 274 1.7.2.2 jdolecek value != IXGBE_CS4227_RESET_PENDING) 275 1.7.2.2 jdolecek break; 276 1.7.2.2 jdolecek 277 1.7.2.2 jdolecek /* Reset is pending. Wait and check again. */ 278 1.7.2.2 jdolecek hw->mac.ops.release_swfw_sync(hw, swfw_mask); 279 1.7.2.2 jdolecek msec_delay(IXGBE_CS4227_CHECK_DELAY); 280 1.7.2.2 jdolecek } 281 1.7.2.2 jdolecek 282 1.7.2.2 jdolecek /* If still pending, assume other instance failed. */ 283 1.7.2.2 jdolecek if (retry == IXGBE_CS4227_RETRIES) { 284 1.7.2.2 jdolecek status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); 285 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) { 286 1.7.2.2 jdolecek ERROR_REPORT2(IXGBE_ERROR_CAUTION, 287 1.7.2.2 jdolecek "semaphore failed with %d", status); 288 1.7.2.2 jdolecek return; 289 1.7.2.2 jdolecek } 290 1.7.2.2 jdolecek } 291 1.7.2.2 jdolecek 292 1.7.2.2 jdolecek /* Reset the CS4227. */ 293 1.7.2.2 jdolecek status = ixgbe_reset_cs4227(hw); 294 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) { 295 1.7.2.2 jdolecek ERROR_REPORT2(IXGBE_ERROR_INVALID_STATE, 296 1.7.2.2 jdolecek "CS4227 reset failed: %d", status); 297 1.7.2.2 jdolecek goto out; 298 1.7.2.2 jdolecek } 299 1.7.2.2 jdolecek 300 1.7.2.2 jdolecek /* Reset takes so long, temporarily release semaphore in case the 301 1.7.2.2 jdolecek * other driver instance is waiting for the reset indication. 302 1.7.2.2 jdolecek */ 303 1.7.2.2 jdolecek ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, 304 1.7.2.2 jdolecek IXGBE_CS4227_RESET_PENDING); 305 1.7.2.2 jdolecek hw->mac.ops.release_swfw_sync(hw, swfw_mask); 306 1.7.2.2 jdolecek msec_delay(10); 307 1.7.2.2 jdolecek status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); 308 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) { 309 1.7.2.2 jdolecek ERROR_REPORT2(IXGBE_ERROR_CAUTION, 310 1.7.2.2 jdolecek "semaphore failed with %d", status); 311 1.7.2.2 jdolecek return; 312 1.7.2.2 jdolecek } 313 1.7.2.2 jdolecek 314 1.7.2.2 jdolecek /* Record completion for next time. */ 315 1.7.2.2 jdolecek status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, 316 1.7.2.2 jdolecek IXGBE_CS4227_RESET_COMPLETE); 317 1.7.2.2 jdolecek 318 1.7.2.2 jdolecek out: 319 1.7.2.2 jdolecek hw->mac.ops.release_swfw_sync(hw, swfw_mask); 320 1.7.2.2 jdolecek msec_delay(hw->eeprom.semaphore_delay); 321 1.7.2.2 jdolecek } 322 1.7.2.2 jdolecek 323 1.7.2.2 jdolecek /** 324 1.7.2.2 jdolecek * ixgbe_setup_mux_ctl - Setup ESDP register for I2C mux control 325 1.7.2.2 jdolecek * @hw: pointer to hardware structure 326 1.7.2.2 jdolecek **/ 327 1.7.2.2 jdolecek static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw) 328 1.7.2.2 jdolecek { 329 1.7.2.2 jdolecek u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 330 1.7.2.2 jdolecek 331 1.7.2.2 jdolecek if (hw->bus.lan_id) { 332 1.7.2.2 jdolecek esdp &= ~(IXGBE_ESDP_SDP1_NATIVE | IXGBE_ESDP_SDP1); 333 1.7.2.2 jdolecek esdp |= IXGBE_ESDP_SDP1_DIR; 334 1.7.2.2 jdolecek } 335 1.7.2.2 jdolecek esdp &= ~(IXGBE_ESDP_SDP0_NATIVE | IXGBE_ESDP_SDP0_DIR); 336 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 337 1.7.2.2 jdolecek IXGBE_WRITE_FLUSH(hw); 338 1.7.2.2 jdolecek } 339 1.7.2.2 jdolecek 340 1.7.2.2 jdolecek /** 341 1.7.2.2 jdolecek * ixgbe_read_phy_reg_mdi_22 - Read from a clause 22 PHY register without lock 342 1.7.2.2 jdolecek * @hw: pointer to hardware structure 343 1.7.2.2 jdolecek * @reg_addr: 32 bit address of PHY register to read 344 1.7.2.2 jdolecek * @dev_type: always unused 345 1.7.2.2 jdolecek * @phy_data: Pointer to read data from PHY register 346 1.7.2.2 jdolecek */ 347 1.7.2.2 jdolecek static s32 ixgbe_read_phy_reg_mdi_22(struct ixgbe_hw *hw, u32 reg_addr, 348 1.7.2.2 jdolecek u32 dev_type, u16 *phy_data) 349 1.7.2.2 jdolecek { 350 1.7.2.2 jdolecek u32 i, data, command; 351 1.7.2.2 jdolecek UNREFERENCED_1PARAMETER(dev_type); 352 1.7.2.2 jdolecek 353 1.7.2.2 jdolecek /* Setup and write the read command */ 354 1.7.2.2 jdolecek command = (reg_addr << IXGBE_MSCA_DEV_TYPE_SHIFT) | 355 1.7.2.2 jdolecek (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | 356 1.7.2.2 jdolecek IXGBE_MSCA_OLD_PROTOCOL | IXGBE_MSCA_READ_AUTOINC | 357 1.7.2.2 jdolecek IXGBE_MSCA_MDI_COMMAND; 358 1.7.2.2 jdolecek 359 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); 360 1.7.2.2 jdolecek 361 1.7.2.2 jdolecek /* Check every 10 usec to see if the access completed. 362 1.7.2.2 jdolecek * The MDI Command bit will clear when the operation is 363 1.7.2.2 jdolecek * complete 364 1.7.2.2 jdolecek */ 365 1.7.2.2 jdolecek for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { 366 1.7.2.2 jdolecek usec_delay(10); 367 1.7.2.2 jdolecek 368 1.7.2.2 jdolecek command = IXGBE_READ_REG(hw, IXGBE_MSCA); 369 1.7.2.2 jdolecek if (!(command & IXGBE_MSCA_MDI_COMMAND)) 370 1.7.2.2 jdolecek break; 371 1.7.2.2 jdolecek } 372 1.7.2.2 jdolecek 373 1.7.2.2 jdolecek if (command & IXGBE_MSCA_MDI_COMMAND) { 374 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_POLLING, 375 1.7.2.2 jdolecek "PHY read command did not complete.\n"); 376 1.7.2.2 jdolecek return IXGBE_ERR_PHY; 377 1.7.2.2 jdolecek } 378 1.7.2.2 jdolecek 379 1.7.2.2 jdolecek /* Read operation is complete. Get the data from MSRWD */ 380 1.7.2.2 jdolecek data = IXGBE_READ_REG(hw, IXGBE_MSRWD); 381 1.7.2.2 jdolecek data >>= IXGBE_MSRWD_READ_DATA_SHIFT; 382 1.7.2.2 jdolecek *phy_data = (u16)data; 383 1.7.2.2 jdolecek 384 1.7.2.2 jdolecek return IXGBE_SUCCESS; 385 1.7.2.2 jdolecek } 386 1.7.2.2 jdolecek 387 1.7.2.2 jdolecek /** 388 1.7.2.2 jdolecek * ixgbe_write_phy_reg_mdi_22 - Write to a clause 22 PHY register without lock 389 1.7.2.2 jdolecek * @hw: pointer to hardware structure 390 1.7.2.2 jdolecek * @reg_addr: 32 bit PHY register to write 391 1.7.2.2 jdolecek * @dev_type: always unused 392 1.7.2.2 jdolecek * @phy_data: Data to write to the PHY register 393 1.7.2.2 jdolecek */ 394 1.7.2.2 jdolecek static s32 ixgbe_write_phy_reg_mdi_22(struct ixgbe_hw *hw, u32 reg_addr, 395 1.7.2.2 jdolecek u32 dev_type, u16 phy_data) 396 1.7.2.2 jdolecek { 397 1.7.2.2 jdolecek u32 i, command; 398 1.7.2.2 jdolecek UNREFERENCED_1PARAMETER(dev_type); 399 1.7.2.2 jdolecek 400 1.7.2.2 jdolecek /* Put the data in the MDI single read and write data register*/ 401 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_MSRWD, (u32)phy_data); 402 1.7.2.2 jdolecek 403 1.7.2.2 jdolecek /* Setup and write the write command */ 404 1.7.2.2 jdolecek command = (reg_addr << IXGBE_MSCA_DEV_TYPE_SHIFT) | 405 1.7.2.2 jdolecek (hw->phy.addr << IXGBE_MSCA_PHY_ADDR_SHIFT) | 406 1.7.2.2 jdolecek IXGBE_MSCA_OLD_PROTOCOL | IXGBE_MSCA_WRITE | 407 1.7.2.2 jdolecek IXGBE_MSCA_MDI_COMMAND; 408 1.7.2.2 jdolecek 409 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_MSCA, command); 410 1.7.2.2 jdolecek 411 1.7.2.2 jdolecek /* Check every 10 usec to see if the access completed. 412 1.7.2.2 jdolecek * The MDI Command bit will clear when the operation is 413 1.7.2.2 jdolecek * complete 414 1.7.2.2 jdolecek */ 415 1.7.2.2 jdolecek for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { 416 1.7.2.2 jdolecek usec_delay(10); 417 1.7.2.2 jdolecek 418 1.7.2.2 jdolecek command = IXGBE_READ_REG(hw, IXGBE_MSCA); 419 1.7.2.2 jdolecek if (!(command & IXGBE_MSCA_MDI_COMMAND)) 420 1.7.2.2 jdolecek break; 421 1.7.2.2 jdolecek } 422 1.7.2.2 jdolecek 423 1.7.2.2 jdolecek if (command & IXGBE_MSCA_MDI_COMMAND) { 424 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_POLLING, 425 1.7.2.2 jdolecek "PHY write cmd didn't complete\n"); 426 1.7.2.2 jdolecek return IXGBE_ERR_PHY; 427 1.7.2.2 jdolecek } 428 1.7.2.2 jdolecek 429 1.7.2.2 jdolecek return IXGBE_SUCCESS; 430 1.7.2.2 jdolecek } 431 1.7.2.2 jdolecek 432 1.7.2.2 jdolecek /** 433 1.7.2.2 jdolecek * ixgbe_identify_phy_x550em - Get PHY type based on device id 434 1.7.2.2 jdolecek * @hw: pointer to hardware structure 435 1.7.2.2 jdolecek * 436 1.7.2.2 jdolecek * Returns error code 437 1.7.2.2 jdolecek */ 438 1.7.2.2 jdolecek static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) 439 1.7.2.2 jdolecek { 440 1.7.2.2 jdolecek hw->mac.ops.set_lan_id(hw); 441 1.7.2.2 jdolecek 442 1.7.2.2 jdolecek ixgbe_read_mng_if_sel_x550em(hw); 443 1.7.2.2 jdolecek 444 1.7.2.2 jdolecek switch (hw->device_id) { 445 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_SFP: 446 1.7.2.2 jdolecek return ixgbe_identify_module_generic(hw); 447 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_SFP: 448 1.7.2.2 jdolecek /* set up for CS4227 usage */ 449 1.7.2.2 jdolecek ixgbe_setup_mux_ctl(hw); 450 1.7.2.2 jdolecek ixgbe_check_cs4227(hw); 451 1.7.2.2 jdolecek /* Fallthrough */ 452 1.7.2.2 jdolecek 453 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_SFP_N: 454 1.7.2.2 jdolecek return ixgbe_identify_module_generic(hw); 455 1.7.2.2 jdolecek break; 456 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_KX4: 457 1.7.2.2 jdolecek hw->phy.type = ixgbe_phy_x550em_kx4; 458 1.7.2.2 jdolecek break; 459 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_XFI: 460 1.7.2.2 jdolecek hw->phy.type = ixgbe_phy_x550em_xfi; 461 1.7.2.2 jdolecek break; 462 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_KR: 463 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_KR: 464 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_KR_L: 465 1.7.2.2 jdolecek hw->phy.type = ixgbe_phy_x550em_kr; 466 1.7.2.2 jdolecek break; 467 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_10G_T: 468 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_10G_T: 469 1.7.2.2 jdolecek return ixgbe_identify_phy_generic(hw); 470 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_1G_T: 471 1.7.2.2 jdolecek hw->phy.type = ixgbe_phy_ext_1g_t; 472 1.7.2.2 jdolecek hw->phy.ops.read_reg = NULL; 473 1.7.2.2 jdolecek hw->phy.ops.write_reg = NULL; 474 1.7.2.2 jdolecek break; 475 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_1G_T: 476 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_1G_T_L: 477 1.7.2.2 jdolecek hw->phy.type = ixgbe_phy_fw; 478 1.7.2.2 jdolecek hw->phy.ops.read_reg = NULL; 479 1.7.2.2 jdolecek hw->phy.ops.write_reg = NULL; 480 1.7.2.2 jdolecek if (hw->bus.lan_id) 481 1.7.2.2 jdolecek hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; 482 1.7.2.2 jdolecek else 483 1.7.2.2 jdolecek hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM; 484 1.7.2.2 jdolecek break; 485 1.7.2.2 jdolecek default: 486 1.7.2.2 jdolecek break; 487 1.7.2.2 jdolecek } 488 1.7.2.2 jdolecek return IXGBE_SUCCESS; 489 1.7.2.2 jdolecek } 490 1.7.2.2 jdolecek 491 1.7.2.2 jdolecek /** 492 1.7.2.2 jdolecek * ixgbe_fw_phy_activity - Perform an activity on a PHY 493 1.7.2.2 jdolecek * @hw: pointer to hardware structure 494 1.7.2.2 jdolecek * @activity: activity to perform 495 1.7.2.2 jdolecek * @data: Pointer to 4 32-bit words of data 496 1.7.2.2 jdolecek */ 497 1.7.2.2 jdolecek s32 ixgbe_fw_phy_activity(struct ixgbe_hw *hw, u16 activity, 498 1.7.2.2 jdolecek u32 (*data)[FW_PHY_ACT_DATA_COUNT]) 499 1.7.2.2 jdolecek { 500 1.7.2.2 jdolecek union { 501 1.7.2.2 jdolecek struct ixgbe_hic_phy_activity_req cmd; 502 1.7.2.2 jdolecek struct ixgbe_hic_phy_activity_resp rsp; 503 1.7.2.2 jdolecek } hic; 504 1.7.2.2 jdolecek u16 retries = FW_PHY_ACT_RETRIES; 505 1.7.2.2 jdolecek s32 rc; 506 1.7.2.2 jdolecek u16 i; 507 1.7.2.2 jdolecek 508 1.7.2.2 jdolecek do { 509 1.7.2.2 jdolecek memset(&hic, 0, sizeof(hic)); 510 1.7.2.2 jdolecek hic.cmd.hdr.cmd = FW_PHY_ACT_REQ_CMD; 511 1.7.2.2 jdolecek hic.cmd.hdr.buf_len = FW_PHY_ACT_REQ_LEN; 512 1.7.2.2 jdolecek hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; 513 1.7.2.2 jdolecek hic.cmd.port_number = hw->bus.lan_id; 514 1.7.2.2 jdolecek hic.cmd.activity_id = IXGBE_CPU_TO_LE16(activity); 515 1.7.2.2 jdolecek for (i = 0; i < FW_PHY_ACT_DATA_COUNT; ++i) 516 1.7.2.2 jdolecek hic.cmd.data[i] = IXGBE_CPU_TO_BE32((*data)[i]); 517 1.7.2.2 jdolecek 518 1.7.2.2 jdolecek rc = ixgbe_host_interface_command(hw, (u32 *)&hic.cmd, 519 1.7.2.2 jdolecek sizeof(hic.cmd), 520 1.7.2.2 jdolecek IXGBE_HI_COMMAND_TIMEOUT, 521 1.7.2.2 jdolecek TRUE); 522 1.7.2.2 jdolecek if (rc != IXGBE_SUCCESS) 523 1.7.2.2 jdolecek return rc; 524 1.7.2.2 jdolecek if (hic.rsp.hdr.cmd_or_resp.ret_status == 525 1.7.2.2 jdolecek FW_CEM_RESP_STATUS_SUCCESS) { 526 1.7.2.2 jdolecek for (i = 0; i < FW_PHY_ACT_DATA_COUNT; ++i) 527 1.7.2.2 jdolecek (*data)[i] = IXGBE_BE32_TO_CPU(hic.rsp.data[i]); 528 1.7.2.2 jdolecek return IXGBE_SUCCESS; 529 1.7.2.2 jdolecek } 530 1.7.2.2 jdolecek usec_delay(20); 531 1.7.2.2 jdolecek --retries; 532 1.7.2.2 jdolecek } while (retries > 0); 533 1.7.2.2 jdolecek 534 1.7.2.2 jdolecek return IXGBE_ERR_HOST_INTERFACE_COMMAND; 535 1.7.2.2 jdolecek } 536 1.7.2.2 jdolecek 537 1.7.2.2 jdolecek static const struct { 538 1.7.2.2 jdolecek u16 fw_speed; 539 1.7.2.2 jdolecek ixgbe_link_speed phy_speed; 540 1.7.2.2 jdolecek } ixgbe_fw_map[] = { 541 1.7.2.2 jdolecek { FW_PHY_ACT_LINK_SPEED_10, IXGBE_LINK_SPEED_10_FULL }, 542 1.7.2.2 jdolecek { FW_PHY_ACT_LINK_SPEED_100, IXGBE_LINK_SPEED_100_FULL }, 543 1.7.2.2 jdolecek { FW_PHY_ACT_LINK_SPEED_1G, IXGBE_LINK_SPEED_1GB_FULL }, 544 1.7.2.2 jdolecek { FW_PHY_ACT_LINK_SPEED_2_5G, IXGBE_LINK_SPEED_2_5GB_FULL }, 545 1.7.2.2 jdolecek { FW_PHY_ACT_LINK_SPEED_5G, IXGBE_LINK_SPEED_5GB_FULL }, 546 1.7.2.2 jdolecek { FW_PHY_ACT_LINK_SPEED_10G, IXGBE_LINK_SPEED_10GB_FULL }, 547 1.7.2.2 jdolecek }; 548 1.7.2.2 jdolecek 549 1.7.2.2 jdolecek /** 550 1.7.2.2 jdolecek * ixgbe_get_phy_id_fw - Get the phy ID via firmware command 551 1.7.2.2 jdolecek * @hw: pointer to hardware structure 552 1.7.2.2 jdolecek * 553 1.7.2.2 jdolecek * Returns error code 554 1.7.2.2 jdolecek */ 555 1.7.2.2 jdolecek static s32 ixgbe_get_phy_id_fw(struct ixgbe_hw *hw) 556 1.7.2.2 jdolecek { 557 1.7.2.2 jdolecek u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 }; 558 1.7.2.2 jdolecek u16 phy_speeds; 559 1.7.2.2 jdolecek u16 phy_id_lo; 560 1.7.2.2 jdolecek s32 rc; 561 1.7.2.2 jdolecek u16 i; 562 1.7.2.2 jdolecek 563 1.7.2.2 jdolecek rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_PHY_INFO, &info); 564 1.7.2.2 jdolecek if (rc) 565 1.7.2.2 jdolecek return rc; 566 1.7.2.2 jdolecek 567 1.7.2.2 jdolecek hw->phy.speeds_supported = 0; 568 1.7.2.2 jdolecek phy_speeds = info[0] & FW_PHY_INFO_SPEED_MASK; 569 1.7.2.2 jdolecek for (i = 0; i < sizeof(ixgbe_fw_map) / sizeof(ixgbe_fw_map[0]); ++i) { 570 1.7.2.2 jdolecek if (phy_speeds & ixgbe_fw_map[i].fw_speed) 571 1.7.2.2 jdolecek hw->phy.speeds_supported |= ixgbe_fw_map[i].phy_speed; 572 1.7.2.2 jdolecek } 573 1.7.2.2 jdolecek if (!hw->phy.autoneg_advertised) 574 1.7.2.2 jdolecek hw->phy.autoneg_advertised = hw->phy.speeds_supported; 575 1.7.2.2 jdolecek 576 1.7.2.2 jdolecek hw->phy.id = info[0] & FW_PHY_INFO_ID_HI_MASK; 577 1.7.2.2 jdolecek phy_id_lo = info[1] & FW_PHY_INFO_ID_LO_MASK; 578 1.7.2.2 jdolecek hw->phy.id |= phy_id_lo & IXGBE_PHY_REVISION_MASK; 579 1.7.2.2 jdolecek hw->phy.revision = phy_id_lo & ~IXGBE_PHY_REVISION_MASK; 580 1.7.2.2 jdolecek if (!hw->phy.id || hw->phy.id == IXGBE_PHY_REVISION_MASK) 581 1.7.2.2 jdolecek return IXGBE_ERR_PHY_ADDR_INVALID; 582 1.7.2.2 jdolecek return IXGBE_SUCCESS; 583 1.7.2.2 jdolecek } 584 1.7.2.2 jdolecek 585 1.7.2.2 jdolecek /** 586 1.7.2.2 jdolecek * ixgbe_identify_phy_fw - Get PHY type based on firmware command 587 1.7.2.2 jdolecek * @hw: pointer to hardware structure 588 1.7.2.2 jdolecek * 589 1.7.2.2 jdolecek * Returns error code 590 1.7.2.2 jdolecek */ 591 1.7.2.2 jdolecek static s32 ixgbe_identify_phy_fw(struct ixgbe_hw *hw) 592 1.7.2.2 jdolecek { 593 1.7.2.2 jdolecek if (hw->bus.lan_id) 594 1.7.2.2 jdolecek hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY1_SM; 595 1.7.2.2 jdolecek else 596 1.7.2.2 jdolecek hw->phy.phy_semaphore_mask = IXGBE_GSSR_PHY0_SM; 597 1.7.2.2 jdolecek 598 1.7.2.2 jdolecek hw->phy.type = ixgbe_phy_fw; 599 1.7.2.2 jdolecek hw->phy.ops.read_reg = NULL; 600 1.7.2.2 jdolecek hw->phy.ops.write_reg = NULL; 601 1.7.2.2 jdolecek return ixgbe_get_phy_id_fw(hw); 602 1.7.2.2 jdolecek } 603 1.7.2.2 jdolecek 604 1.7.2.2 jdolecek /** 605 1.7.2.2 jdolecek * ixgbe_shutdown_fw_phy - Shutdown a firmware-controlled PHY 606 1.7.2.2 jdolecek * @hw: pointer to hardware structure 607 1.7.2.2 jdolecek * 608 1.7.2.2 jdolecek * Returns error code 609 1.7.2.2 jdolecek */ 610 1.7.2.2 jdolecek s32 ixgbe_shutdown_fw_phy(struct ixgbe_hw *hw) 611 1.7.2.2 jdolecek { 612 1.7.2.2 jdolecek u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 }; 613 1.7.2.2 jdolecek 614 1.7.2.2 jdolecek setup[0] = FW_PHY_ACT_FORCE_LINK_DOWN_OFF; 615 1.7.2.2 jdolecek return ixgbe_fw_phy_activity(hw, FW_PHY_ACT_FORCE_LINK_DOWN, &setup); 616 1.7.2.2 jdolecek } 617 1.7.2.2 jdolecek 618 1.7.2.2 jdolecek static s32 ixgbe_read_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr, 619 1.7.2.2 jdolecek u32 device_type, u16 *phy_data) 620 1.7.2.2 jdolecek { 621 1.7.2.2 jdolecek UNREFERENCED_4PARAMETER(*hw, reg_addr, device_type, *phy_data); 622 1.7.2.2 jdolecek return IXGBE_NOT_IMPLEMENTED; 623 1.7.2.2 jdolecek } 624 1.7.2.2 jdolecek 625 1.7.2.2 jdolecek static s32 ixgbe_write_phy_reg_x550em(struct ixgbe_hw *hw, u32 reg_addr, 626 1.7.2.2 jdolecek u32 device_type, u16 phy_data) 627 1.7.2.2 jdolecek { 628 1.7.2.2 jdolecek UNREFERENCED_4PARAMETER(*hw, reg_addr, device_type, phy_data); 629 1.7.2.2 jdolecek return IXGBE_NOT_IMPLEMENTED; 630 1.7.2.2 jdolecek } 631 1.7.2.2 jdolecek 632 1.7.2.2 jdolecek /** 633 1.7.2.2 jdolecek * ixgbe_read_i2c_combined_generic - Perform I2C read combined operation 634 1.7.2.2 jdolecek * @hw: pointer to the hardware structure 635 1.7.2.2 jdolecek * @addr: I2C bus address to read from 636 1.7.2.2 jdolecek * @reg: I2C device register to read from 637 1.7.2.2 jdolecek * @val: pointer to location to receive read value 638 1.7.2.2 jdolecek * 639 1.7.2.2 jdolecek * Returns an error code on error. 640 1.7.2.2 jdolecek **/ 641 1.7.2.2 jdolecek static s32 ixgbe_read_i2c_combined_generic(struct ixgbe_hw *hw, u8 addr, 642 1.7.2.2 jdolecek u16 reg, u16 *val) 643 1.7.2.2 jdolecek { 644 1.7.2.2 jdolecek return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, TRUE); 645 1.7.2.2 jdolecek } 646 1.7.2.2 jdolecek 647 1.7.2.2 jdolecek /** 648 1.7.2.2 jdolecek * ixgbe_read_i2c_combined_generic_unlocked - Do I2C read combined operation 649 1.7.2.2 jdolecek * @hw: pointer to the hardware structure 650 1.7.2.2 jdolecek * @addr: I2C bus address to read from 651 1.7.2.2 jdolecek * @reg: I2C device register to read from 652 1.7.2.2 jdolecek * @val: pointer to location to receive read value 653 1.7.2.2 jdolecek * 654 1.7.2.2 jdolecek * Returns an error code on error. 655 1.7.2.2 jdolecek **/ 656 1.7.2.2 jdolecek static s32 657 1.7.2.2 jdolecek ixgbe_read_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, u8 addr, 658 1.7.2.2 jdolecek u16 reg, u16 *val) 659 1.7.2.2 jdolecek { 660 1.7.2.2 jdolecek return ixgbe_read_i2c_combined_generic_int(hw, addr, reg, val, FALSE); 661 1.7.2.2 jdolecek } 662 1.7.2.2 jdolecek 663 1.7.2.2 jdolecek /** 664 1.7.2.2 jdolecek * ixgbe_write_i2c_combined_generic - Perform I2C write combined operation 665 1.7.2.2 jdolecek * @hw: pointer to the hardware structure 666 1.7.2.2 jdolecek * @addr: I2C bus address to write to 667 1.7.2.2 jdolecek * @reg: I2C device register to write to 668 1.7.2.2 jdolecek * @val: value to write 669 1.7.2.2 jdolecek * 670 1.7.2.2 jdolecek * Returns an error code on error. 671 1.7.2.2 jdolecek **/ 672 1.7.2.2 jdolecek static s32 ixgbe_write_i2c_combined_generic(struct ixgbe_hw *hw, 673 1.7.2.2 jdolecek u8 addr, u16 reg, u16 val) 674 1.7.2.2 jdolecek { 675 1.7.2.2 jdolecek return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, TRUE); 676 1.7.2.2 jdolecek } 677 1.7.2.2 jdolecek 678 1.7.2.2 jdolecek /** 679 1.7.2.2 jdolecek * ixgbe_write_i2c_combined_generic_unlocked - Do I2C write combined operation 680 1.7.2.2 jdolecek * @hw: pointer to the hardware structure 681 1.7.2.2 jdolecek * @addr: I2C bus address to write to 682 1.7.2.2 jdolecek * @reg: I2C device register to write to 683 1.7.2.2 jdolecek * @val: value to write 684 1.7.2.2 jdolecek * 685 1.7.2.2 jdolecek * Returns an error code on error. 686 1.7.2.2 jdolecek **/ 687 1.7.2.2 jdolecek static s32 688 1.7.2.2 jdolecek ixgbe_write_i2c_combined_generic_unlocked(struct ixgbe_hw *hw, 689 1.7.2.2 jdolecek u8 addr, u16 reg, u16 val) 690 1.7.2.2 jdolecek { 691 1.7.2.2 jdolecek return ixgbe_write_i2c_combined_generic_int(hw, addr, reg, val, FALSE); 692 1.7.2.2 jdolecek } 693 1.7.2.2 jdolecek 694 1.7.2.2 jdolecek /** 695 1.7.2.2 jdolecek * ixgbe_init_ops_X550EM - Inits func ptrs and MAC type 696 1.7.2.2 jdolecek * @hw: pointer to hardware structure 697 1.7.2.2 jdolecek * 698 1.7.2.2 jdolecek * Initialize the function pointers and for MAC type X550EM. 699 1.7.2.2 jdolecek * Does not touch the hardware. 700 1.7.2.2 jdolecek **/ 701 1.7.2.2 jdolecek s32 ixgbe_init_ops_X550EM(struct ixgbe_hw *hw) 702 1.7.2.2 jdolecek { 703 1.7.2.2 jdolecek struct ixgbe_mac_info *mac = &hw->mac; 704 1.7.2.2 jdolecek struct ixgbe_eeprom_info *eeprom = &hw->eeprom; 705 1.7.2.2 jdolecek struct ixgbe_phy_info *phy = &hw->phy; 706 1.7.2.2 jdolecek s32 ret_val; 707 1.7.2.2 jdolecek 708 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_init_ops_X550EM"); 709 1.7.2.2 jdolecek 710 1.7.2.2 jdolecek /* Similar to X550 so start there. */ 711 1.7.2.2 jdolecek ret_val = ixgbe_init_ops_X550(hw); 712 1.7.2.2 jdolecek 713 1.7.2.2 jdolecek /* Since this function eventually calls 714 1.7.2.2 jdolecek * ixgbe_init_ops_540 by design, we are setting 715 1.7.2.2 jdolecek * the pointers to NULL explicitly here to overwrite 716 1.7.2.2 jdolecek * the values being set in the x540 function. 717 1.7.2.2 jdolecek */ 718 1.7.2.2 jdolecek 719 1.7.2.2 jdolecek /* Bypass not supported in x550EM */ 720 1.7.2.2 jdolecek mac->ops.bypass_rw = NULL; 721 1.7.2.2 jdolecek mac->ops.bypass_valid_rd = NULL; 722 1.7.2.2 jdolecek mac->ops.bypass_set = NULL; 723 1.7.2.2 jdolecek mac->ops.bypass_rd_eep = NULL; 724 1.7.2.2 jdolecek 725 1.7.2.2 jdolecek /* FCOE not supported in x550EM */ 726 1.7.2.2 jdolecek mac->ops.get_san_mac_addr = NULL; 727 1.7.2.2 jdolecek mac->ops.set_san_mac_addr = NULL; 728 1.7.2.2 jdolecek mac->ops.get_wwn_prefix = NULL; 729 1.7.2.2 jdolecek mac->ops.get_fcoe_boot_status = NULL; 730 1.7.2.2 jdolecek 731 1.7.2.2 jdolecek /* IPsec not supported in x550EM */ 732 1.7.2.2 jdolecek mac->ops.disable_sec_rx_path = NULL; 733 1.7.2.2 jdolecek mac->ops.enable_sec_rx_path = NULL; 734 1.7.2.2 jdolecek 735 1.7.2.2 jdolecek /* AUTOC register is not present in x550EM. */ 736 1.7.2.2 jdolecek mac->ops.prot_autoc_read = NULL; 737 1.7.2.2 jdolecek mac->ops.prot_autoc_write = NULL; 738 1.7.2.2 jdolecek 739 1.7.2.2 jdolecek /* X550EM bus type is internal*/ 740 1.7.2.2 jdolecek hw->bus.type = ixgbe_bus_type_internal; 741 1.7.2.2 jdolecek mac->ops.get_bus_info = ixgbe_get_bus_info_X550em; 742 1.7.2.2 jdolecek 743 1.7.2.2 jdolecek 744 1.7.2.2 jdolecek mac->ops.get_media_type = ixgbe_get_media_type_X550em; 745 1.7.2.2 jdolecek mac->ops.setup_sfp = ixgbe_setup_sfp_modules_X550em; 746 1.7.2.2 jdolecek mac->ops.get_link_capabilities = ixgbe_get_link_capabilities_X550em; 747 1.7.2.2 jdolecek mac->ops.reset_hw = ixgbe_reset_hw_X550em; 748 1.7.2.2 jdolecek mac->ops.get_supported_physical_layer = 749 1.7.2.2 jdolecek ixgbe_get_supported_physical_layer_X550em; 750 1.7.2.2 jdolecek 751 1.7.2.2 jdolecek if (mac->ops.get_media_type(hw) == ixgbe_media_type_copper) 752 1.7.2.2 jdolecek mac->ops.setup_fc = ixgbe_setup_fc_generic; 753 1.7.2.2 jdolecek else 754 1.7.2.2 jdolecek mac->ops.setup_fc = ixgbe_setup_fc_X550em; 755 1.7.2.2 jdolecek 756 1.7.2.2 jdolecek /* PHY */ 757 1.7.2.2 jdolecek phy->ops.init = ixgbe_init_phy_ops_X550em; 758 1.7.2.2 jdolecek switch (hw->device_id) { 759 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_1G_T: 760 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_1G_T_L: 761 1.7.2.2 jdolecek mac->ops.setup_fc = NULL; 762 1.7.2.2 jdolecek phy->ops.identify = ixgbe_identify_phy_fw; 763 1.7.2.2 jdolecek phy->ops.set_phy_power = NULL; 764 1.7.2.2 jdolecek phy->ops.get_firmware_version = NULL; 765 1.7.2.2 jdolecek break; 766 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_1G_T: 767 1.7.2.2 jdolecek mac->ops.setup_fc = NULL; 768 1.7.2.2 jdolecek phy->ops.identify = ixgbe_identify_phy_x550em; 769 1.7.2.2 jdolecek phy->ops.set_phy_power = NULL; 770 1.7.2.2 jdolecek break; 771 1.7.2.2 jdolecek default: 772 1.7.2.2 jdolecek phy->ops.identify = ixgbe_identify_phy_x550em; 773 1.7.2.2 jdolecek } 774 1.7.2.2 jdolecek 775 1.7.2.2 jdolecek if (mac->ops.get_media_type(hw) != ixgbe_media_type_copper) 776 1.7.2.2 jdolecek phy->ops.set_phy_power = NULL; 777 1.7.2.2 jdolecek 778 1.7.2.2 jdolecek 779 1.7.2.2 jdolecek /* EEPROM */ 780 1.7.2.2 jdolecek eeprom->ops.init_params = ixgbe_init_eeprom_params_X540; 781 1.7.2.2 jdolecek eeprom->ops.read = ixgbe_read_ee_hostif_X550; 782 1.7.2.2 jdolecek eeprom->ops.read_buffer = ixgbe_read_ee_hostif_buffer_X550; 783 1.7.2.2 jdolecek eeprom->ops.write = ixgbe_write_ee_hostif_X550; 784 1.7.2.2 jdolecek eeprom->ops.write_buffer = ixgbe_write_ee_hostif_buffer_X550; 785 1.7.2.2 jdolecek eeprom->ops.update_checksum = ixgbe_update_eeprom_checksum_X550; 786 1.7.2.2 jdolecek eeprom->ops.validate_checksum = ixgbe_validate_eeprom_checksum_X550; 787 1.7.2.2 jdolecek eeprom->ops.calc_checksum = ixgbe_calc_eeprom_checksum_X550; 788 1.7.2.2 jdolecek 789 1.7.2.2 jdolecek return ret_val; 790 1.7.2.2 jdolecek } 791 1.7.2.2 jdolecek 792 1.7.2.2 jdolecek #define IXGBE_DENVERTON_WA 1 793 1.7.2.2 jdolecek 794 1.7.2.2 jdolecek /** 795 1.7.2.2 jdolecek * ixgbe_setup_fw_link - Setup firmware-controlled PHYs 796 1.7.2.2 jdolecek * @hw: pointer to hardware structure 797 1.7.2.2 jdolecek */ 798 1.7.2.2 jdolecek static s32 ixgbe_setup_fw_link(struct ixgbe_hw *hw) 799 1.7.2.2 jdolecek { 800 1.7.2.2 jdolecek u32 setup[FW_PHY_ACT_DATA_COUNT] = { 0 }; 801 1.7.2.2 jdolecek s32 rc; 802 1.7.2.2 jdolecek #ifdef IXGBE_DENVERTON_WA 803 1.7.2.2 jdolecek s32 ret_val; 804 1.7.2.2 jdolecek u16 phydata; 805 1.7.2.2 jdolecek #endif 806 1.7.2.2 jdolecek u16 i; 807 1.7.2.2 jdolecek 808 1.7.2.2 jdolecek if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw)) 809 1.7.2.2 jdolecek return 0; 810 1.7.2.2 jdolecek 811 1.7.2.2 jdolecek if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { 812 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, 813 1.7.2.2 jdolecek "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); 814 1.7.2.2 jdolecek return IXGBE_ERR_INVALID_LINK_SETTINGS; 815 1.7.2.2 jdolecek } 816 1.7.2.2 jdolecek 817 1.7.2.2 jdolecek switch (hw->fc.requested_mode) { 818 1.7.2.2 jdolecek case ixgbe_fc_full: 819 1.7.2.2 jdolecek setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RXTX << 820 1.7.2.2 jdolecek FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; 821 1.7.2.2 jdolecek break; 822 1.7.2.2 jdolecek case ixgbe_fc_rx_pause: 823 1.7.2.2 jdolecek setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_RX << 824 1.7.2.2 jdolecek FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; 825 1.7.2.2 jdolecek break; 826 1.7.2.2 jdolecek case ixgbe_fc_tx_pause: 827 1.7.2.2 jdolecek setup[0] |= FW_PHY_ACT_SETUP_LINK_PAUSE_TX << 828 1.7.2.2 jdolecek FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT; 829 1.7.2.2 jdolecek break; 830 1.7.2.2 jdolecek default: 831 1.7.2.2 jdolecek break; 832 1.7.2.2 jdolecek } 833 1.7.2.2 jdolecek 834 1.7.2.2 jdolecek for (i = 0; i < sizeof(ixgbe_fw_map) / sizeof(ixgbe_fw_map[0]); ++i) { 835 1.7.2.2 jdolecek if (hw->phy.autoneg_advertised & ixgbe_fw_map[i].phy_speed) 836 1.7.2.2 jdolecek setup[0] |= ixgbe_fw_map[i].fw_speed; 837 1.7.2.2 jdolecek } 838 1.7.2.2 jdolecek setup[0] |= FW_PHY_ACT_SETUP_LINK_HP | FW_PHY_ACT_SETUP_LINK_AN; 839 1.7.2.2 jdolecek 840 1.7.2.2 jdolecek if (hw->phy.eee_speeds_advertised) 841 1.7.2.2 jdolecek setup[0] |= FW_PHY_ACT_SETUP_LINK_EEE; 842 1.7.2.2 jdolecek 843 1.7.2.2 jdolecek #ifdef IXGBE_DENVERTON_WA 844 1.7.2.2 jdolecek /* Don't use auto-nego for 10/100Mbps */ 845 1.7.2.2 jdolecek if ((hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_100_FULL) 846 1.7.2.2 jdolecek || (hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_10_FULL)) { 847 1.7.2.2 jdolecek setup[0] &= ~FW_PHY_ACT_SETUP_LINK_AN; 848 1.7.2.2 jdolecek setup[0] &= ~FW_PHY_ACT_SETUP_LINK_EEE; 849 1.7.2.2 jdolecek setup[0] &= ~(FW_PHY_ACT_SETUP_LINK_PAUSE_RXTX 850 1.7.2.2 jdolecek << FW_PHY_ACT_SETUP_LINK_PAUSE_SHIFT); 851 1.7.2.2 jdolecek } 852 1.7.2.2 jdolecek #endif 853 1.7.2.2 jdolecek 854 1.7.2.2 jdolecek rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_SETUP_LINK, &setup); 855 1.7.2.2 jdolecek if (rc) 856 1.7.2.2 jdolecek return rc; 857 1.7.2.2 jdolecek 858 1.7.2.2 jdolecek #ifdef IXGBE_DENVERTON_WA 859 1.7.2.2 jdolecek ret_val = ixgbe_read_phy_reg_x550a(hw, MII_BMCR, 0, &phydata); 860 1.7.2.2 jdolecek if (ret_val != 0) 861 1.7.2.2 jdolecek goto out; 862 1.7.2.2 jdolecek 863 1.7.2.2 jdolecek /* 864 1.7.2.2 jdolecek * Broken firmware sets BMCR register incorrectly if 865 1.7.2.2 jdolecek * FW_PHY_ACT_SETUP_LINK_AN isn't set. 866 1.7.2.2 jdolecek * a) FDX may not be set. 867 1.7.2.2 jdolecek * b) BMCR_SPEED1 (bit 6) is always cleard. 868 1.7.2.2 jdolecek * + -------+------+-----------+-----+--------------------------+ 869 1.7.2.2 jdolecek * |request | BMCR | BMCR spd | BMCR | | 870 1.7.2.2 jdolecek * | | (HEX)| (in bits)| FDX | | 871 1.7.2.2 jdolecek * +--------+------+----------+------+--------------------------+ 872 1.7.2.2 jdolecek * | 10M | 0000 | 10M(00) | 0 | | 873 1.7.2.2 jdolecek * | 10M | 2000 | 100M(01) | 0 |(I've never observed this)| 874 1.7.2.2 jdolecek * | 10M | 2100 | 100M(01) | 1 | | 875 1.7.2.2 jdolecek * | 100M | 0000 | 10M(00) | 0 | | 876 1.7.2.2 jdolecek * | 100M | 0100 | 10M(00) | 1 | | 877 1.7.2.2 jdolecek * +--------------------------+------+--------------------------+ 878 1.7.2.2 jdolecek */ 879 1.7.2.2 jdolecek if (((hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_100_FULL) 880 1.7.2.2 jdolecek && (((phydata & BMCR_FDX) == 0) || (BMCR_SPEED(phydata) == 0))) 881 1.7.2.2 jdolecek || ((hw->phy.autoneg_advertised == IXGBE_LINK_SPEED_10_FULL) 882 1.7.2.2 jdolecek && (((phydata & BMCR_FDX) == 0) 883 1.7.2.2 jdolecek || (BMCR_SPEED(phydata) != BMCR_S10)))) { 884 1.7.2.2 jdolecek phydata = BMCR_FDX; 885 1.7.2.2 jdolecek switch (hw->phy.autoneg_advertised) { 886 1.7.2.2 jdolecek case IXGBE_LINK_SPEED_10_FULL: 887 1.7.2.2 jdolecek phydata |= BMCR_S10; 888 1.7.2.2 jdolecek break; 889 1.7.2.2 jdolecek case IXGBE_LINK_SPEED_100_FULL: 890 1.7.2.2 jdolecek phydata |= BMCR_S100; 891 1.7.2.2 jdolecek break; 892 1.7.2.2 jdolecek case IXGBE_LINK_SPEED_1GB_FULL: 893 1.7.2.2 jdolecek panic("%s: 1GB_FULL is set", __func__); 894 1.7.2.2 jdolecek break; 895 1.7.2.2 jdolecek default: 896 1.7.2.2 jdolecek break; 897 1.7.2.2 jdolecek } 898 1.7.2.2 jdolecek ret_val = ixgbe_write_phy_reg_x550a(hw, MII_BMCR, 0, phydata); 899 1.7.2.2 jdolecek if (ret_val != 0) 900 1.7.2.2 jdolecek return ret_val; 901 1.7.2.2 jdolecek } 902 1.7.2.2 jdolecek out: 903 1.7.2.2 jdolecek #endif 904 1.7.2.2 jdolecek if (setup[0] == FW_PHY_ACT_SETUP_LINK_RSP_DOWN) 905 1.7.2.2 jdolecek return IXGBE_ERR_OVERTEMP; 906 1.7.2.2 jdolecek return IXGBE_SUCCESS; 907 1.7.2.2 jdolecek } 908 1.7.2.2 jdolecek 909 1.7.2.2 jdolecek /** 910 1.7.2.2 jdolecek * ixgbe_fc_autoneg_fw _ Set up flow control for FW-controlled PHYs 911 1.7.2.2 jdolecek * @hw: pointer to hardware structure 912 1.7.2.2 jdolecek * 913 1.7.2.2 jdolecek * Called at init time to set up flow control. 914 1.7.2.2 jdolecek */ 915 1.7.2.2 jdolecek static s32 ixgbe_fc_autoneg_fw(struct ixgbe_hw *hw) 916 1.7.2.2 jdolecek { 917 1.7.2.2 jdolecek if (hw->fc.requested_mode == ixgbe_fc_default) 918 1.7.2.2 jdolecek hw->fc.requested_mode = ixgbe_fc_full; 919 1.7.2.2 jdolecek 920 1.7.2.2 jdolecek return ixgbe_setup_fw_link(hw); 921 1.7.2.2 jdolecek } 922 1.7.2.2 jdolecek 923 1.7.2.2 jdolecek /** 924 1.7.2.2 jdolecek * ixgbe_setup_eee_fw - Enable/disable EEE support 925 1.7.2.2 jdolecek * @hw: pointer to the HW structure 926 1.7.2.2 jdolecek * @enable_eee: boolean flag to enable EEE 927 1.7.2.2 jdolecek * 928 1.7.2.2 jdolecek * Enable/disable EEE based on enable_eee flag. 929 1.7.2.2 jdolecek * This function controls EEE for firmware-based PHY implementations. 930 1.7.2.2 jdolecek */ 931 1.7.2.2 jdolecek static s32 ixgbe_setup_eee_fw(struct ixgbe_hw *hw, bool enable_eee) 932 1.7.2.2 jdolecek { 933 1.7.2.2 jdolecek if (!!hw->phy.eee_speeds_advertised == enable_eee) 934 1.7.2.2 jdolecek return IXGBE_SUCCESS; 935 1.7.2.2 jdolecek if (enable_eee) 936 1.7.2.2 jdolecek hw->phy.eee_speeds_advertised = hw->phy.eee_speeds_supported; 937 1.7.2.2 jdolecek else 938 1.7.2.2 jdolecek hw->phy.eee_speeds_advertised = 0; 939 1.7.2.2 jdolecek return hw->phy.ops.setup_link(hw); 940 1.7.2.2 jdolecek } 941 1.7.2.2 jdolecek 942 1.7.2.2 jdolecek /** 943 1.7.2.2 jdolecek * ixgbe_init_ops_X550EM_a - Inits func ptrs and MAC type 944 1.7.2.2 jdolecek * @hw: pointer to hardware structure 945 1.7.2.2 jdolecek * 946 1.7.2.2 jdolecek * Initialize the function pointers and for MAC type X550EM_a. 947 1.7.2.2 jdolecek * Does not touch the hardware. 948 1.7.2.2 jdolecek **/ 949 1.7.2.2 jdolecek s32 ixgbe_init_ops_X550EM_a(struct ixgbe_hw *hw) 950 1.7.2.2 jdolecek { 951 1.7.2.2 jdolecek struct ixgbe_mac_info *mac = &hw->mac; 952 1.7.2.2 jdolecek s32 ret_val; 953 1.7.2.2 jdolecek 954 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_init_ops_X550EM_a"); 955 1.7.2.2 jdolecek 956 1.7.2.2 jdolecek /* Start with generic X550EM init */ 957 1.7.2.2 jdolecek ret_val = ixgbe_init_ops_X550EM(hw); 958 1.7.2.2 jdolecek 959 1.7.2.2 jdolecek if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII || 960 1.7.2.2 jdolecek hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L) { 961 1.7.2.2 jdolecek mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550; 962 1.7.2.2 jdolecek mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550; 963 1.7.2.2 jdolecek } else { 964 1.7.2.2 jdolecek mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550a; 965 1.7.2.2 jdolecek mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550a; 966 1.7.2.2 jdolecek } 967 1.7.2.2 jdolecek mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550a; 968 1.7.2.2 jdolecek mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550a; 969 1.7.2.2 jdolecek 970 1.7.2.2 jdolecek switch (mac->ops.get_media_type(hw)) { 971 1.7.2.2 jdolecek case ixgbe_media_type_fiber: 972 1.7.2.2 jdolecek mac->ops.setup_fc = NULL; 973 1.7.2.2 jdolecek mac->ops.fc_autoneg = ixgbe_fc_autoneg_fiber_x550em_a; 974 1.7.2.2 jdolecek break; 975 1.7.2.2 jdolecek case ixgbe_media_type_backplane: 976 1.7.2.2 jdolecek mac->ops.fc_autoneg = ixgbe_fc_autoneg_backplane_x550em_a; 977 1.7.2.2 jdolecek mac->ops.setup_fc = ixgbe_setup_fc_backplane_x550em_a; 978 1.7.2.2 jdolecek break; 979 1.7.2.2 jdolecek default: 980 1.7.2.2 jdolecek break; 981 1.7.2.2 jdolecek } 982 1.7.2.2 jdolecek 983 1.7.2.2 jdolecek switch (hw->device_id) { 984 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_1G_T: 985 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_1G_T_L: 986 1.7.2.2 jdolecek mac->ops.fc_autoneg = ixgbe_fc_autoneg_sgmii_x550em_a; 987 1.7.2.2 jdolecek mac->ops.setup_fc = ixgbe_fc_autoneg_fw; 988 1.7.2.2 jdolecek mac->ops.setup_eee = ixgbe_setup_eee_fw; 989 1.7.2.2 jdolecek hw->phy.eee_speeds_supported = IXGBE_LINK_SPEED_100_FULL | 990 1.7.2.2 jdolecek IXGBE_LINK_SPEED_1GB_FULL; 991 1.7.2.2 jdolecek hw->phy.eee_speeds_advertised = hw->phy.eee_speeds_supported; 992 1.7.2.2 jdolecek break; 993 1.7.2.2 jdolecek default: 994 1.7.2.2 jdolecek break; 995 1.7.2.2 jdolecek } 996 1.7.2.2 jdolecek 997 1.7.2.2 jdolecek return ret_val; 998 1.7.2.2 jdolecek } 999 1.7.2.2 jdolecek 1000 1.7.2.2 jdolecek /** 1001 1.7.2.2 jdolecek * ixgbe_init_ops_X550EM_x - Inits func ptrs and MAC type 1002 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1003 1.7.2.2 jdolecek * 1004 1.7.2.2 jdolecek * Initialize the function pointers and for MAC type X550EM_x. 1005 1.7.2.2 jdolecek * Does not touch the hardware. 1006 1.7.2.2 jdolecek **/ 1007 1.7.2.2 jdolecek s32 ixgbe_init_ops_X550EM_x(struct ixgbe_hw *hw) 1008 1.7.2.2 jdolecek { 1009 1.7.2.2 jdolecek struct ixgbe_mac_info *mac = &hw->mac; 1010 1.7.2.2 jdolecek struct ixgbe_link_info *link = &hw->link; 1011 1.7.2.2 jdolecek s32 ret_val; 1012 1.7.2.2 jdolecek 1013 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_init_ops_X550EM_x"); 1014 1.7.2.2 jdolecek 1015 1.7.2.2 jdolecek /* Start with generic X550EM init */ 1016 1.7.2.2 jdolecek ret_val = ixgbe_init_ops_X550EM(hw); 1017 1.7.2.2 jdolecek 1018 1.7.2.2 jdolecek mac->ops.read_iosf_sb_reg = ixgbe_read_iosf_sb_reg_x550; 1019 1.7.2.2 jdolecek mac->ops.write_iosf_sb_reg = ixgbe_write_iosf_sb_reg_x550; 1020 1.7.2.2 jdolecek mac->ops.acquire_swfw_sync = ixgbe_acquire_swfw_sync_X550em; 1021 1.7.2.2 jdolecek mac->ops.release_swfw_sync = ixgbe_release_swfw_sync_X550em; 1022 1.7.2.2 jdolecek link->ops.read_link = ixgbe_read_i2c_combined_generic; 1023 1.7.2.2 jdolecek link->ops.read_link_unlocked = ixgbe_read_i2c_combined_generic_unlocked; 1024 1.7.2.2 jdolecek link->ops.write_link = ixgbe_write_i2c_combined_generic; 1025 1.7.2.2 jdolecek link->ops.write_link_unlocked = 1026 1.7.2.2 jdolecek ixgbe_write_i2c_combined_generic_unlocked; 1027 1.7.2.2 jdolecek link->addr = IXGBE_CS4227; 1028 1.7.2.2 jdolecek 1029 1.7.2.2 jdolecek if (hw->device_id == IXGBE_DEV_ID_X550EM_X_1G_T) { 1030 1.7.2.2 jdolecek mac->ops.setup_fc = NULL; 1031 1.7.2.2 jdolecek mac->ops.setup_eee = NULL; 1032 1.7.2.2 jdolecek mac->ops.init_led_link_act = NULL; 1033 1.7.2.2 jdolecek } 1034 1.7.2.2 jdolecek 1035 1.7.2.2 jdolecek return ret_val; 1036 1.7.2.2 jdolecek } 1037 1.7.2.2 jdolecek 1038 1.7.2.2 jdolecek /** 1039 1.7.2.2 jdolecek * ixgbe_dmac_config_X550 1040 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1041 1.7.2.2 jdolecek * 1042 1.7.2.2 jdolecek * Configure DMA coalescing. If enabling dmac, dmac is activated. 1043 1.7.2.2 jdolecek * When disabling dmac, dmac enable dmac bit is cleared. 1044 1.7.2.2 jdolecek **/ 1045 1.7.2.2 jdolecek s32 ixgbe_dmac_config_X550(struct ixgbe_hw *hw) 1046 1.7.2.2 jdolecek { 1047 1.7.2.2 jdolecek u32 reg, high_pri_tc; 1048 1.7.2.2 jdolecek 1049 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_dmac_config_X550"); 1050 1.7.2.2 jdolecek 1051 1.7.2.2 jdolecek /* Disable DMA coalescing before configuring */ 1052 1.7.2.2 jdolecek reg = IXGBE_READ_REG(hw, IXGBE_DMACR); 1053 1.7.2.2 jdolecek reg &= ~IXGBE_DMACR_DMAC_EN; 1054 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg); 1055 1.7.2.2 jdolecek 1056 1.7.2.2 jdolecek /* Disable DMA Coalescing if the watchdog timer is 0 */ 1057 1.7.2.2 jdolecek if (!hw->mac.dmac_config.watchdog_timer) 1058 1.7.2.2 jdolecek goto out; 1059 1.7.2.2 jdolecek 1060 1.7.2.2 jdolecek ixgbe_dmac_config_tcs_X550(hw); 1061 1.7.2.2 jdolecek 1062 1.7.2.2 jdolecek /* Configure DMA Coalescing Control Register */ 1063 1.7.2.2 jdolecek reg = IXGBE_READ_REG(hw, IXGBE_DMACR); 1064 1.7.2.2 jdolecek 1065 1.7.2.2 jdolecek /* Set the watchdog timer in units of 40.96 usec */ 1066 1.7.2.2 jdolecek reg &= ~IXGBE_DMACR_DMACWT_MASK; 1067 1.7.2.2 jdolecek reg |= (hw->mac.dmac_config.watchdog_timer * 100) / 4096; 1068 1.7.2.2 jdolecek 1069 1.7.2.2 jdolecek reg &= ~IXGBE_DMACR_HIGH_PRI_TC_MASK; 1070 1.7.2.2 jdolecek /* If fcoe is enabled, set high priority traffic class */ 1071 1.7.2.2 jdolecek if (hw->mac.dmac_config.fcoe_en) { 1072 1.7.2.2 jdolecek high_pri_tc = 1 << hw->mac.dmac_config.fcoe_tc; 1073 1.7.2.2 jdolecek reg |= ((high_pri_tc << IXGBE_DMACR_HIGH_PRI_TC_SHIFT) & 1074 1.7.2.2 jdolecek IXGBE_DMACR_HIGH_PRI_TC_MASK); 1075 1.7.2.2 jdolecek } 1076 1.7.2.2 jdolecek reg |= IXGBE_DMACR_EN_MNG_IND; 1077 1.7.2.2 jdolecek 1078 1.7.2.2 jdolecek /* Enable DMA coalescing after configuration */ 1079 1.7.2.2 jdolecek reg |= IXGBE_DMACR_DMAC_EN; 1080 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg); 1081 1.7.2.2 jdolecek 1082 1.7.2.2 jdolecek out: 1083 1.7.2.2 jdolecek return IXGBE_SUCCESS; 1084 1.7.2.2 jdolecek } 1085 1.7.2.2 jdolecek 1086 1.7.2.2 jdolecek /** 1087 1.7.2.2 jdolecek * ixgbe_dmac_config_tcs_X550 1088 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1089 1.7.2.2 jdolecek * 1090 1.7.2.2 jdolecek * Configure DMA coalescing threshold per TC. The dmac enable bit must 1091 1.7.2.2 jdolecek * be cleared before configuring. 1092 1.7.2.2 jdolecek **/ 1093 1.7.2.2 jdolecek s32 ixgbe_dmac_config_tcs_X550(struct ixgbe_hw *hw) 1094 1.7.2.2 jdolecek { 1095 1.7.2.2 jdolecek u32 tc, reg, pb_headroom, rx_pb_size, maxframe_size_kb; 1096 1.7.2.2 jdolecek 1097 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_dmac_config_tcs_X550"); 1098 1.7.2.2 jdolecek 1099 1.7.2.2 jdolecek /* Configure DMA coalescing enabled */ 1100 1.7.2.2 jdolecek switch (hw->mac.dmac_config.link_speed) { 1101 1.7.2.2 jdolecek case IXGBE_LINK_SPEED_10_FULL: 1102 1.7.2.2 jdolecek case IXGBE_LINK_SPEED_100_FULL: 1103 1.7.2.2 jdolecek pb_headroom = IXGBE_DMACRXT_100M; 1104 1.7.2.2 jdolecek break; 1105 1.7.2.2 jdolecek case IXGBE_LINK_SPEED_1GB_FULL: 1106 1.7.2.2 jdolecek pb_headroom = IXGBE_DMACRXT_1G; 1107 1.7.2.2 jdolecek break; 1108 1.7.2.2 jdolecek default: 1109 1.7.2.2 jdolecek pb_headroom = IXGBE_DMACRXT_10G; 1110 1.7.2.2 jdolecek break; 1111 1.7.2.2 jdolecek } 1112 1.7.2.2 jdolecek 1113 1.7.2.2 jdolecek maxframe_size_kb = ((IXGBE_READ_REG(hw, IXGBE_MAXFRS) >> 1114 1.7.2.2 jdolecek IXGBE_MHADD_MFS_SHIFT) / 1024); 1115 1.7.2.2 jdolecek 1116 1.7.2.2 jdolecek /* Set the per Rx packet buffer receive threshold */ 1117 1.7.2.2 jdolecek for (tc = 0; tc < IXGBE_DCB_MAX_TRAFFIC_CLASS; tc++) { 1118 1.7.2.2 jdolecek reg = IXGBE_READ_REG(hw, IXGBE_DMCTH(tc)); 1119 1.7.2.2 jdolecek reg &= ~IXGBE_DMCTH_DMACRXT_MASK; 1120 1.7.2.2 jdolecek 1121 1.7.2.2 jdolecek if (tc < hw->mac.dmac_config.num_tcs) { 1122 1.7.2.2 jdolecek /* Get Rx PB size */ 1123 1.7.2.2 jdolecek rx_pb_size = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(tc)); 1124 1.7.2.2 jdolecek rx_pb_size = (rx_pb_size & IXGBE_RXPBSIZE_MASK) >> 1125 1.7.2.2 jdolecek IXGBE_RXPBSIZE_SHIFT; 1126 1.7.2.2 jdolecek 1127 1.7.2.2 jdolecek /* Calculate receive buffer threshold in kilobytes */ 1128 1.7.2.2 jdolecek if (rx_pb_size > pb_headroom) 1129 1.7.2.2 jdolecek rx_pb_size = rx_pb_size - pb_headroom; 1130 1.7.2.2 jdolecek else 1131 1.7.2.2 jdolecek rx_pb_size = 0; 1132 1.7.2.2 jdolecek 1133 1.7.2.2 jdolecek /* Minimum of MFS shall be set for DMCTH */ 1134 1.7.2.2 jdolecek reg |= (rx_pb_size > maxframe_size_kb) ? 1135 1.7.2.2 jdolecek rx_pb_size : maxframe_size_kb; 1136 1.7.2.2 jdolecek } 1137 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_DMCTH(tc), reg); 1138 1.7.2.2 jdolecek } 1139 1.7.2.2 jdolecek return IXGBE_SUCCESS; 1140 1.7.2.2 jdolecek } 1141 1.7.2.2 jdolecek 1142 1.7.2.2 jdolecek /** 1143 1.7.2.2 jdolecek * ixgbe_dmac_update_tcs_X550 1144 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1145 1.7.2.2 jdolecek * 1146 1.7.2.2 jdolecek * Disables dmac, updates per TC settings, and then enables dmac. 1147 1.7.2.2 jdolecek **/ 1148 1.7.2.2 jdolecek s32 ixgbe_dmac_update_tcs_X550(struct ixgbe_hw *hw) 1149 1.7.2.2 jdolecek { 1150 1.7.2.2 jdolecek u32 reg; 1151 1.7.2.2 jdolecek 1152 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_dmac_update_tcs_X550"); 1153 1.7.2.2 jdolecek 1154 1.7.2.2 jdolecek /* Disable DMA coalescing before configuring */ 1155 1.7.2.2 jdolecek reg = IXGBE_READ_REG(hw, IXGBE_DMACR); 1156 1.7.2.2 jdolecek reg &= ~IXGBE_DMACR_DMAC_EN; 1157 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg); 1158 1.7.2.2 jdolecek 1159 1.7.2.2 jdolecek ixgbe_dmac_config_tcs_X550(hw); 1160 1.7.2.2 jdolecek 1161 1.7.2.2 jdolecek /* Enable DMA coalescing after configuration */ 1162 1.7.2.2 jdolecek reg = IXGBE_READ_REG(hw, IXGBE_DMACR); 1163 1.7.2.2 jdolecek reg |= IXGBE_DMACR_DMAC_EN; 1164 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_DMACR, reg); 1165 1.7.2.2 jdolecek 1166 1.7.2.2 jdolecek return IXGBE_SUCCESS; 1167 1.7.2.2 jdolecek } 1168 1.7.2.2 jdolecek 1169 1.7.2.2 jdolecek /** 1170 1.7.2.2 jdolecek * ixgbe_init_eeprom_params_X550 - Initialize EEPROM params 1171 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1172 1.7.2.2 jdolecek * 1173 1.7.2.2 jdolecek * Initializes the EEPROM parameters ixgbe_eeprom_info within the 1174 1.7.2.2 jdolecek * ixgbe_hw struct in order to set up EEPROM access. 1175 1.7.2.2 jdolecek **/ 1176 1.7.2.2 jdolecek s32 ixgbe_init_eeprom_params_X550(struct ixgbe_hw *hw) 1177 1.7.2.2 jdolecek { 1178 1.7.2.2 jdolecek struct ixgbe_eeprom_info *eeprom = &hw->eeprom; 1179 1.7.2.2 jdolecek u32 eec; 1180 1.7.2.2 jdolecek u16 eeprom_size; 1181 1.7.2.2 jdolecek 1182 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_init_eeprom_params_X550"); 1183 1.7.2.2 jdolecek 1184 1.7.2.2 jdolecek if (eeprom->type == ixgbe_eeprom_uninitialized) { 1185 1.7.2.2 jdolecek eeprom->semaphore_delay = 10; 1186 1.7.2.2 jdolecek eeprom->type = ixgbe_flash; 1187 1.7.2.2 jdolecek 1188 1.7.2.2 jdolecek eec = IXGBE_READ_REG(hw, IXGBE_EEC); 1189 1.7.2.2 jdolecek eeprom_size = (u16)((eec & IXGBE_EEC_SIZE) >> 1190 1.7.2.2 jdolecek IXGBE_EEC_SIZE_SHIFT); 1191 1.7.2.2 jdolecek eeprom->word_size = 1 << (eeprom_size + 1192 1.7.2.2 jdolecek IXGBE_EEPROM_WORD_SIZE_SHIFT); 1193 1.7.2.2 jdolecek 1194 1.7.2.2 jdolecek DEBUGOUT2("Eeprom params: type = %d, size = %d\n", 1195 1.7.2.2 jdolecek eeprom->type, eeprom->word_size); 1196 1.7.2.2 jdolecek } 1197 1.7.2.2 jdolecek 1198 1.7.2.2 jdolecek return IXGBE_SUCCESS; 1199 1.7.2.2 jdolecek } 1200 1.7.2.2 jdolecek 1201 1.7.2.2 jdolecek /** 1202 1.7.2.2 jdolecek * ixgbe_set_source_address_pruning_X550 - Enable/Disbale source address pruning 1203 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1204 1.7.2.2 jdolecek * @enable: enable or disable source address pruning 1205 1.7.2.2 jdolecek * @pool: Rx pool to set source address pruning for 1206 1.7.2.2 jdolecek **/ 1207 1.7.2.2 jdolecek void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw, bool enable, 1208 1.7.2.2 jdolecek unsigned int pool) 1209 1.7.2.2 jdolecek { 1210 1.7.2.2 jdolecek u64 pfflp; 1211 1.7.2.2 jdolecek 1212 1.7.2.2 jdolecek /* max rx pool is 63 */ 1213 1.7.2.2 jdolecek if (pool > 63) 1214 1.7.2.2 jdolecek return; 1215 1.7.2.2 jdolecek 1216 1.7.2.2 jdolecek pfflp = (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPL); 1217 1.7.2.2 jdolecek pfflp |= (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPH) << 32; 1218 1.7.2.2 jdolecek 1219 1.7.2.2 jdolecek if (enable) 1220 1.7.2.2 jdolecek pfflp |= (1ULL << pool); 1221 1.7.2.2 jdolecek else 1222 1.7.2.2 jdolecek pfflp &= ~(1ULL << pool); 1223 1.7.2.2 jdolecek 1224 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (u32)pfflp); 1225 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32)); 1226 1.7.2.2 jdolecek } 1227 1.7.2.2 jdolecek 1228 1.7.2.2 jdolecek /** 1229 1.7.2.2 jdolecek * ixgbe_set_ethertype_anti_spoofing_X550 - Enable/Disable Ethertype anti-spoofing 1230 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1231 1.7.2.2 jdolecek * @enable: enable or disable switch for Ethertype anti-spoofing 1232 1.7.2.2 jdolecek * @vf: Virtual Function pool - VF Pool to set for Ethertype anti-spoofing 1233 1.7.2.2 jdolecek * 1234 1.7.2.2 jdolecek **/ 1235 1.7.2.2 jdolecek void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw, 1236 1.7.2.2 jdolecek bool enable, int vf) 1237 1.7.2.2 jdolecek { 1238 1.7.2.2 jdolecek int vf_target_reg = vf >> 3; 1239 1.7.2.2 jdolecek int vf_target_shift = vf % 8 + IXGBE_SPOOF_ETHERTYPEAS_SHIFT; 1240 1.7.2.2 jdolecek u32 pfvfspoof; 1241 1.7.2.2 jdolecek 1242 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_set_ethertype_anti_spoofing_X550"); 1243 1.7.2.2 jdolecek 1244 1.7.2.2 jdolecek pfvfspoof = IXGBE_READ_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg)); 1245 1.7.2.2 jdolecek if (enable) 1246 1.7.2.2 jdolecek pfvfspoof |= (1 << vf_target_shift); 1247 1.7.2.2 jdolecek else 1248 1.7.2.2 jdolecek pfvfspoof &= ~(1 << vf_target_shift); 1249 1.7.2.2 jdolecek 1250 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof); 1251 1.7.2.2 jdolecek } 1252 1.7.2.2 jdolecek 1253 1.7.2.2 jdolecek /** 1254 1.7.2.2 jdolecek * ixgbe_iosf_wait - Wait for IOSF command completion 1255 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1256 1.7.2.2 jdolecek * @ctrl: pointer to location to receive final IOSF control value 1257 1.7.2.2 jdolecek * 1258 1.7.2.2 jdolecek * Returns failing status on timeout 1259 1.7.2.2 jdolecek * 1260 1.7.2.2 jdolecek * Note: ctrl can be NULL if the IOSF control register value is not needed 1261 1.7.2.2 jdolecek **/ 1262 1.7.2.2 jdolecek static s32 ixgbe_iosf_wait(struct ixgbe_hw *hw, u32 *ctrl) 1263 1.7.2.2 jdolecek { 1264 1.7.2.2 jdolecek u32 i, command = 0; 1265 1.7.2.2 jdolecek 1266 1.7.2.2 jdolecek /* Check every 10 usec to see if the address cycle completed. 1267 1.7.2.2 jdolecek * The SB IOSF BUSY bit will clear when the operation is 1268 1.7.2.2 jdolecek * complete 1269 1.7.2.2 jdolecek */ 1270 1.7.2.2 jdolecek for (i = 0; i < IXGBE_MDIO_COMMAND_TIMEOUT; i++) { 1271 1.7.2.2 jdolecek command = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL); 1272 1.7.2.2 jdolecek if ((command & IXGBE_SB_IOSF_CTRL_BUSY) == 0) 1273 1.7.2.2 jdolecek break; 1274 1.7.2.2 jdolecek usec_delay(10); 1275 1.7.2.2 jdolecek } 1276 1.7.2.2 jdolecek if (ctrl) 1277 1.7.2.2 jdolecek *ctrl = command; 1278 1.7.2.2 jdolecek if (i == IXGBE_MDIO_COMMAND_TIMEOUT) { 1279 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_POLLING, "Wait timed out\n"); 1280 1.7.2.2 jdolecek return IXGBE_ERR_PHY; 1281 1.7.2.2 jdolecek } 1282 1.7.2.2 jdolecek 1283 1.7.2.2 jdolecek return IXGBE_SUCCESS; 1284 1.7.2.2 jdolecek } 1285 1.7.2.2 jdolecek 1286 1.7.2.2 jdolecek /** 1287 1.7.2.2 jdolecek * ixgbe_write_iosf_sb_reg_x550 - Writes a value to specified register 1288 1.7.2.2 jdolecek * of the IOSF device 1289 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1290 1.7.2.2 jdolecek * @reg_addr: 32 bit PHY register to write 1291 1.7.2.2 jdolecek * @device_type: 3 bit device type 1292 1.7.2.2 jdolecek * @data: Data to write to the register 1293 1.7.2.2 jdolecek **/ 1294 1.7.2.2 jdolecek s32 ixgbe_write_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, 1295 1.7.2.2 jdolecek u32 device_type, u32 data) 1296 1.7.2.2 jdolecek { 1297 1.7.2.2 jdolecek u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM; 1298 1.7.2.2 jdolecek u32 command, error __unused; 1299 1.7.2.2 jdolecek s32 ret; 1300 1.7.2.2 jdolecek 1301 1.7.2.2 jdolecek ret = ixgbe_acquire_swfw_semaphore(hw, gssr); 1302 1.7.2.2 jdolecek if (ret != IXGBE_SUCCESS) 1303 1.7.2.2 jdolecek return ret; 1304 1.7.2.2 jdolecek 1305 1.7.2.2 jdolecek ret = ixgbe_iosf_wait(hw, NULL); 1306 1.7.2.2 jdolecek if (ret != IXGBE_SUCCESS) 1307 1.7.2.2 jdolecek goto out; 1308 1.7.2.2 jdolecek 1309 1.7.2.2 jdolecek command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) | 1310 1.7.2.2 jdolecek (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT)); 1311 1.7.2.2 jdolecek 1312 1.7.2.2 jdolecek /* Write IOSF control register */ 1313 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command); 1314 1.7.2.2 jdolecek 1315 1.7.2.2 jdolecek /* Write IOSF data register */ 1316 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA, data); 1317 1.7.2.2 jdolecek 1318 1.7.2.2 jdolecek ret = ixgbe_iosf_wait(hw, &command); 1319 1.7.2.2 jdolecek 1320 1.7.2.2 jdolecek if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) { 1321 1.7.2.2 jdolecek error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >> 1322 1.7.2.2 jdolecek IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT; 1323 1.7.2.2 jdolecek ERROR_REPORT2(IXGBE_ERROR_POLLING, 1324 1.7.2.2 jdolecek "Failed to write, error %x\n", error); 1325 1.7.2.2 jdolecek ret = IXGBE_ERR_PHY; 1326 1.7.2.2 jdolecek } 1327 1.7.2.2 jdolecek 1328 1.7.2.2 jdolecek out: 1329 1.7.2.2 jdolecek ixgbe_release_swfw_semaphore(hw, gssr); 1330 1.7.2.2 jdolecek return ret; 1331 1.7.2.2 jdolecek } 1332 1.7.2.2 jdolecek 1333 1.7.2.2 jdolecek /** 1334 1.7.2.2 jdolecek * ixgbe_read_iosf_sb_reg_x550 - Reads specified register of the IOSF device 1335 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1336 1.7.2.2 jdolecek * @reg_addr: 32 bit PHY register to write 1337 1.7.2.2 jdolecek * @device_type: 3 bit device type 1338 1.7.2.2 jdolecek * @data: Pointer to read data from the register 1339 1.7.2.2 jdolecek **/ 1340 1.7.2.2 jdolecek s32 ixgbe_read_iosf_sb_reg_x550(struct ixgbe_hw *hw, u32 reg_addr, 1341 1.7.2.2 jdolecek u32 device_type, u32 *data) 1342 1.7.2.2 jdolecek { 1343 1.7.2.2 jdolecek u32 gssr = IXGBE_GSSR_PHY1_SM | IXGBE_GSSR_PHY0_SM; 1344 1.7.2.2 jdolecek u32 command, error __unused; 1345 1.7.2.2 jdolecek s32 ret; 1346 1.7.2.2 jdolecek 1347 1.7.2.2 jdolecek ret = ixgbe_acquire_swfw_semaphore(hw, gssr); 1348 1.7.2.2 jdolecek if (ret != IXGBE_SUCCESS) 1349 1.7.2.2 jdolecek return ret; 1350 1.7.2.2 jdolecek 1351 1.7.2.2 jdolecek ret = ixgbe_iosf_wait(hw, NULL); 1352 1.7.2.2 jdolecek if (ret != IXGBE_SUCCESS) 1353 1.7.2.2 jdolecek goto out; 1354 1.7.2.2 jdolecek 1355 1.7.2.2 jdolecek command = ((reg_addr << IXGBE_SB_IOSF_CTRL_ADDR_SHIFT) | 1356 1.7.2.2 jdolecek (device_type << IXGBE_SB_IOSF_CTRL_TARGET_SELECT_SHIFT)); 1357 1.7.2.2 jdolecek 1358 1.7.2.2 jdolecek /* Write IOSF control register */ 1359 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_SB_IOSF_INDIRECT_CTRL, command); 1360 1.7.2.2 jdolecek 1361 1.7.2.2 jdolecek ret = ixgbe_iosf_wait(hw, &command); 1362 1.7.2.2 jdolecek 1363 1.7.2.2 jdolecek if ((command & IXGBE_SB_IOSF_CTRL_RESP_STAT_MASK) != 0) { 1364 1.7.2.2 jdolecek error = (command & IXGBE_SB_IOSF_CTRL_CMPL_ERR_MASK) >> 1365 1.7.2.2 jdolecek IXGBE_SB_IOSF_CTRL_CMPL_ERR_SHIFT; 1366 1.7.2.2 jdolecek ERROR_REPORT2(IXGBE_ERROR_POLLING, 1367 1.7.2.2 jdolecek "Failed to read, error %x\n", error); 1368 1.7.2.2 jdolecek ret = IXGBE_ERR_PHY; 1369 1.7.2.2 jdolecek } 1370 1.7.2.2 jdolecek 1371 1.7.2.2 jdolecek if (ret == IXGBE_SUCCESS) 1372 1.7.2.2 jdolecek *data = IXGBE_READ_REG(hw, IXGBE_SB_IOSF_INDIRECT_DATA); 1373 1.7.2.2 jdolecek 1374 1.7.2.2 jdolecek out: 1375 1.7.2.2 jdolecek ixgbe_release_swfw_semaphore(hw, gssr); 1376 1.7.2.2 jdolecek return ret; 1377 1.7.2.2 jdolecek } 1378 1.7.2.2 jdolecek 1379 1.7.2.2 jdolecek /** 1380 1.7.2.2 jdolecek * ixgbe_get_phy_token - Get the token for shared phy access 1381 1.7.2.2 jdolecek * @hw: Pointer to hardware structure 1382 1.7.2.2 jdolecek */ 1383 1.7.2.2 jdolecek 1384 1.7.2.2 jdolecek s32 ixgbe_get_phy_token(struct ixgbe_hw *hw) 1385 1.7.2.2 jdolecek { 1386 1.7.2.2 jdolecek struct ixgbe_hic_phy_token_req token_cmd; 1387 1.7.2.2 jdolecek s32 status; 1388 1.7.2.2 jdolecek 1389 1.7.2.2 jdolecek token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD; 1390 1.7.2.2 jdolecek token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN; 1391 1.7.2.2 jdolecek token_cmd.hdr.cmd_or_resp.cmd_resv = 0; 1392 1.7.2.2 jdolecek token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; 1393 1.7.2.2 jdolecek token_cmd.port_number = hw->bus.lan_id; 1394 1.7.2.2 jdolecek token_cmd.command_type = FW_PHY_TOKEN_REQ; 1395 1.7.2.2 jdolecek token_cmd.pad = 0; 1396 1.7.2.2 jdolecek status = ixgbe_host_interface_command(hw, (u32 *)&token_cmd, 1397 1.7.2.2 jdolecek sizeof(token_cmd), 1398 1.7.2.2 jdolecek IXGBE_HI_COMMAND_TIMEOUT, 1399 1.7.2.2 jdolecek TRUE); 1400 1.7.2.2 jdolecek if (status) { 1401 1.7.2.2 jdolecek DEBUGOUT1("Issuing host interface command failed with Status = %d\n", 1402 1.7.2.2 jdolecek status); 1403 1.7.2.2 jdolecek return status; 1404 1.7.2.2 jdolecek } 1405 1.7.2.2 jdolecek if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK) 1406 1.7.2.2 jdolecek return IXGBE_SUCCESS; 1407 1.7.2.2 jdolecek if (token_cmd.hdr.cmd_or_resp.ret_status != FW_PHY_TOKEN_RETRY) { 1408 1.7.2.2 jdolecek DEBUGOUT1("Host interface command returned 0x%08x , returning IXGBE_ERR_FW_RESP_INVALID\n", 1409 1.7.2.2 jdolecek token_cmd.hdr.cmd_or_resp.ret_status); 1410 1.7.2.2 jdolecek return IXGBE_ERR_FW_RESP_INVALID; 1411 1.7.2.2 jdolecek } 1412 1.7.2.2 jdolecek 1413 1.7.2.2 jdolecek DEBUGOUT("Returning IXGBE_ERR_TOKEN_RETRY\n"); 1414 1.7.2.2 jdolecek return IXGBE_ERR_TOKEN_RETRY; 1415 1.7.2.2 jdolecek } 1416 1.7.2.2 jdolecek 1417 1.7.2.2 jdolecek /** 1418 1.7.2.2 jdolecek * ixgbe_put_phy_token - Put the token for shared phy access 1419 1.7.2.2 jdolecek * @hw: Pointer to hardware structure 1420 1.7.2.2 jdolecek */ 1421 1.7.2.2 jdolecek 1422 1.7.2.2 jdolecek s32 ixgbe_put_phy_token(struct ixgbe_hw *hw) 1423 1.7.2.2 jdolecek { 1424 1.7.2.2 jdolecek struct ixgbe_hic_phy_token_req token_cmd; 1425 1.7.2.2 jdolecek s32 status; 1426 1.7.2.2 jdolecek 1427 1.7.2.2 jdolecek token_cmd.hdr.cmd = FW_PHY_TOKEN_REQ_CMD; 1428 1.7.2.2 jdolecek token_cmd.hdr.buf_len = FW_PHY_TOKEN_REQ_LEN; 1429 1.7.2.2 jdolecek token_cmd.hdr.cmd_or_resp.cmd_resv = 0; 1430 1.7.2.2 jdolecek token_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; 1431 1.7.2.2 jdolecek token_cmd.port_number = hw->bus.lan_id; 1432 1.7.2.2 jdolecek token_cmd.command_type = FW_PHY_TOKEN_REL; 1433 1.7.2.2 jdolecek token_cmd.pad = 0; 1434 1.7.2.2 jdolecek status = ixgbe_host_interface_command(hw, (u32 *)&token_cmd, 1435 1.7.2.2 jdolecek sizeof(token_cmd), 1436 1.7.2.2 jdolecek IXGBE_HI_COMMAND_TIMEOUT, 1437 1.7.2.2 jdolecek TRUE); 1438 1.7.2.2 jdolecek if (status) 1439 1.7.2.2 jdolecek return status; 1440 1.7.2.2 jdolecek if (token_cmd.hdr.cmd_or_resp.ret_status == FW_PHY_TOKEN_OK) 1441 1.7.2.2 jdolecek return IXGBE_SUCCESS; 1442 1.7.2.2 jdolecek 1443 1.7.2.2 jdolecek DEBUGOUT("Put PHY Token host interface command failed"); 1444 1.7.2.2 jdolecek return IXGBE_ERR_FW_RESP_INVALID; 1445 1.7.2.2 jdolecek } 1446 1.7.2.2 jdolecek 1447 1.7.2.2 jdolecek /** 1448 1.7.2.2 jdolecek * ixgbe_write_iosf_sb_reg_x550a - Writes a value to specified register 1449 1.7.2.2 jdolecek * of the IOSF device 1450 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1451 1.7.2.2 jdolecek * @reg_addr: 32 bit PHY register to write 1452 1.7.2.2 jdolecek * @device_type: 3 bit device type 1453 1.7.2.2 jdolecek * @data: Data to write to the register 1454 1.7.2.2 jdolecek **/ 1455 1.7.2.2 jdolecek s32 ixgbe_write_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, 1456 1.7.2.2 jdolecek u32 device_type, u32 data) 1457 1.7.2.2 jdolecek { 1458 1.7.2.2 jdolecek struct ixgbe_hic_internal_phy_req write_cmd; 1459 1.7.2.2 jdolecek s32 status; 1460 1.7.2.2 jdolecek UNREFERENCED_1PARAMETER(device_type); 1461 1.7.2.2 jdolecek 1462 1.7.2.2 jdolecek memset(&write_cmd, 0, sizeof(write_cmd)); 1463 1.7.2.2 jdolecek write_cmd.hdr.cmd = FW_INT_PHY_REQ_CMD; 1464 1.7.2.2 jdolecek write_cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN; 1465 1.7.2.2 jdolecek write_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; 1466 1.7.2.2 jdolecek write_cmd.port_number = hw->bus.lan_id; 1467 1.7.2.2 jdolecek write_cmd.command_type = FW_INT_PHY_REQ_WRITE; 1468 1.7.2.2 jdolecek write_cmd.address = IXGBE_CPU_TO_BE16(reg_addr); 1469 1.7.2.2 jdolecek write_cmd.write_data = IXGBE_CPU_TO_BE32(data); 1470 1.7.2.2 jdolecek 1471 1.7.2.2 jdolecek status = ixgbe_host_interface_command(hw, (u32 *)&write_cmd, 1472 1.7.2.2 jdolecek sizeof(write_cmd), 1473 1.7.2.2 jdolecek IXGBE_HI_COMMAND_TIMEOUT, FALSE); 1474 1.7.2.2 jdolecek 1475 1.7.2.2 jdolecek return status; 1476 1.7.2.2 jdolecek } 1477 1.7.2.2 jdolecek 1478 1.7.2.2 jdolecek /** 1479 1.7.2.2 jdolecek * ixgbe_read_iosf_sb_reg_x550a - Reads specified register of the IOSF device 1480 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1481 1.7.2.2 jdolecek * @reg_addr: 32 bit PHY register to write 1482 1.7.2.2 jdolecek * @device_type: 3 bit device type 1483 1.7.2.2 jdolecek * @data: Pointer to read data from the register 1484 1.7.2.2 jdolecek **/ 1485 1.7.2.2 jdolecek s32 ixgbe_read_iosf_sb_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, 1486 1.7.2.2 jdolecek u32 device_type, u32 *data) 1487 1.7.2.2 jdolecek { 1488 1.7.2.2 jdolecek union { 1489 1.7.2.2 jdolecek struct ixgbe_hic_internal_phy_req cmd; 1490 1.7.2.2 jdolecek struct ixgbe_hic_internal_phy_resp rsp; 1491 1.7.2.2 jdolecek } hic; 1492 1.7.2.2 jdolecek s32 status; 1493 1.7.2.2 jdolecek UNREFERENCED_1PARAMETER(device_type); 1494 1.7.2.2 jdolecek 1495 1.7.2.2 jdolecek memset(&hic, 0, sizeof(hic)); 1496 1.7.2.2 jdolecek hic.cmd.hdr.cmd = FW_INT_PHY_REQ_CMD; 1497 1.7.2.2 jdolecek hic.cmd.hdr.buf_len = FW_INT_PHY_REQ_LEN; 1498 1.7.2.2 jdolecek hic.cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; 1499 1.7.2.2 jdolecek hic.cmd.port_number = hw->bus.lan_id; 1500 1.7.2.2 jdolecek hic.cmd.command_type = FW_INT_PHY_REQ_READ; 1501 1.7.2.2 jdolecek hic.cmd.address = IXGBE_CPU_TO_BE16(reg_addr); 1502 1.7.2.2 jdolecek 1503 1.7.2.2 jdolecek status = ixgbe_host_interface_command(hw, (u32 *)&hic.cmd, 1504 1.7.2.2 jdolecek sizeof(hic.cmd), 1505 1.7.2.2 jdolecek IXGBE_HI_COMMAND_TIMEOUT, TRUE); 1506 1.7.2.2 jdolecek 1507 1.7.2.2 jdolecek /* Extract the register value from the response. */ 1508 1.7.2.2 jdolecek *data = IXGBE_BE32_TO_CPU(hic.rsp.read_data); 1509 1.7.2.2 jdolecek 1510 1.7.2.2 jdolecek return status; 1511 1.7.2.2 jdolecek } 1512 1.7.2.2 jdolecek 1513 1.7.2.2 jdolecek /** 1514 1.7.2.2 jdolecek * ixgbe_disable_mdd_X550 1515 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1516 1.7.2.2 jdolecek * 1517 1.7.2.2 jdolecek * Disable malicious driver detection 1518 1.7.2.2 jdolecek **/ 1519 1.7.2.2 jdolecek void ixgbe_disable_mdd_X550(struct ixgbe_hw *hw) 1520 1.7.2.2 jdolecek { 1521 1.7.2.2 jdolecek u32 reg; 1522 1.7.2.2 jdolecek 1523 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_disable_mdd_X550"); 1524 1.7.2.2 jdolecek 1525 1.7.2.2 jdolecek /* Disable MDD for TX DMA and interrupt */ 1526 1.7.2.2 jdolecek reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL); 1527 1.7.2.2 jdolecek reg &= ~(IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN); 1528 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg); 1529 1.7.2.2 jdolecek 1530 1.7.2.2 jdolecek /* Disable MDD for RX and interrupt */ 1531 1.7.2.2 jdolecek reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); 1532 1.7.2.2 jdolecek reg &= ~(IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN); 1533 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg); 1534 1.7.2.2 jdolecek } 1535 1.7.2.2 jdolecek 1536 1.7.2.2 jdolecek /** 1537 1.7.2.2 jdolecek * ixgbe_enable_mdd_X550 1538 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1539 1.7.2.2 jdolecek * 1540 1.7.2.2 jdolecek * Enable malicious driver detection 1541 1.7.2.2 jdolecek **/ 1542 1.7.2.2 jdolecek void ixgbe_enable_mdd_X550(struct ixgbe_hw *hw) 1543 1.7.2.2 jdolecek { 1544 1.7.2.2 jdolecek u32 reg; 1545 1.7.2.2 jdolecek 1546 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_enable_mdd_X550"); 1547 1.7.2.2 jdolecek 1548 1.7.2.2 jdolecek /* Enable MDD for TX DMA and interrupt */ 1549 1.7.2.2 jdolecek reg = IXGBE_READ_REG(hw, IXGBE_DMATXCTL); 1550 1.7.2.2 jdolecek reg |= (IXGBE_DMATXCTL_MDP_EN | IXGBE_DMATXCTL_MBINTEN); 1551 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, reg); 1552 1.7.2.2 jdolecek 1553 1.7.2.2 jdolecek /* Enable MDD for RX and interrupt */ 1554 1.7.2.2 jdolecek reg = IXGBE_READ_REG(hw, IXGBE_RDRXCTL); 1555 1.7.2.2 jdolecek reg |= (IXGBE_RDRXCTL_MDP_EN | IXGBE_RDRXCTL_MBINTEN); 1556 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, reg); 1557 1.7.2.2 jdolecek } 1558 1.7.2.2 jdolecek 1559 1.7.2.2 jdolecek /** 1560 1.7.2.2 jdolecek * ixgbe_restore_mdd_vf_X550 1561 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1562 1.7.2.2 jdolecek * @vf: vf index 1563 1.7.2.2 jdolecek * 1564 1.7.2.2 jdolecek * Restore VF that was disabled during malicious driver detection event 1565 1.7.2.2 jdolecek **/ 1566 1.7.2.2 jdolecek void ixgbe_restore_mdd_vf_X550(struct ixgbe_hw *hw, u32 vf) 1567 1.7.2.2 jdolecek { 1568 1.7.2.2 jdolecek u32 idx, reg, num_qs, start_q, bitmask; 1569 1.7.2.2 jdolecek 1570 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_restore_mdd_vf_X550"); 1571 1.7.2.2 jdolecek 1572 1.7.2.2 jdolecek /* Map VF to queues */ 1573 1.7.2.2 jdolecek reg = IXGBE_READ_REG(hw, IXGBE_MRQC); 1574 1.7.2.2 jdolecek switch (reg & IXGBE_MRQC_MRQE_MASK) { 1575 1.7.2.2 jdolecek case IXGBE_MRQC_VMDQRT8TCEN: 1576 1.7.2.2 jdolecek num_qs = 8; /* 16 VFs / pools */ 1577 1.7.2.2 jdolecek bitmask = 0x000000FF; 1578 1.7.2.2 jdolecek break; 1579 1.7.2.2 jdolecek case IXGBE_MRQC_VMDQRSS32EN: 1580 1.7.2.2 jdolecek case IXGBE_MRQC_VMDQRT4TCEN: 1581 1.7.2.2 jdolecek num_qs = 4; /* 32 VFs / pools */ 1582 1.7.2.2 jdolecek bitmask = 0x0000000F; 1583 1.7.2.2 jdolecek break; 1584 1.7.2.2 jdolecek default: /* 64 VFs / pools */ 1585 1.7.2.2 jdolecek num_qs = 2; 1586 1.7.2.2 jdolecek bitmask = 0x00000003; 1587 1.7.2.2 jdolecek break; 1588 1.7.2.2 jdolecek } 1589 1.7.2.2 jdolecek start_q = vf * num_qs; 1590 1.7.2.2 jdolecek 1591 1.7.2.2 jdolecek /* Release vf's queues by clearing WQBR_TX and WQBR_RX (RW1C) */ 1592 1.7.2.2 jdolecek idx = start_q / 32; 1593 1.7.2.2 jdolecek reg = 0; 1594 1.7.2.2 jdolecek reg |= (bitmask << (start_q % 32)); 1595 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_WQBR_TX(idx), reg); 1596 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_WQBR_RX(idx), reg); 1597 1.7.2.2 jdolecek } 1598 1.7.2.2 jdolecek 1599 1.7.2.2 jdolecek /** 1600 1.7.2.2 jdolecek * ixgbe_mdd_event_X550 1601 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1602 1.7.2.2 jdolecek * @vf_bitmap: vf bitmap of malicious vfs 1603 1.7.2.2 jdolecek * 1604 1.7.2.2 jdolecek * Handle malicious driver detection event. 1605 1.7.2.2 jdolecek **/ 1606 1.7.2.2 jdolecek void ixgbe_mdd_event_X550(struct ixgbe_hw *hw, u32 *vf_bitmap) 1607 1.7.2.2 jdolecek { 1608 1.7.2.2 jdolecek u32 wqbr; 1609 1.7.2.2 jdolecek u32 i, j, reg, q, shift, vf, idx; 1610 1.7.2.2 jdolecek 1611 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_mdd_event_X550"); 1612 1.7.2.2 jdolecek 1613 1.7.2.2 jdolecek /* figure out pool size for mapping to vf's */ 1614 1.7.2.2 jdolecek reg = IXGBE_READ_REG(hw, IXGBE_MRQC); 1615 1.7.2.2 jdolecek switch (reg & IXGBE_MRQC_MRQE_MASK) { 1616 1.7.2.2 jdolecek case IXGBE_MRQC_VMDQRT8TCEN: 1617 1.7.2.2 jdolecek shift = 3; /* 16 VFs / pools */ 1618 1.7.2.2 jdolecek break; 1619 1.7.2.2 jdolecek case IXGBE_MRQC_VMDQRSS32EN: 1620 1.7.2.2 jdolecek case IXGBE_MRQC_VMDQRT4TCEN: 1621 1.7.2.2 jdolecek shift = 2; /* 32 VFs / pools */ 1622 1.7.2.2 jdolecek break; 1623 1.7.2.2 jdolecek default: 1624 1.7.2.2 jdolecek shift = 1; /* 64 VFs / pools */ 1625 1.7.2.2 jdolecek break; 1626 1.7.2.2 jdolecek } 1627 1.7.2.2 jdolecek 1628 1.7.2.2 jdolecek /* Read WQBR_TX and WQBR_RX and check for malicious queues */ 1629 1.7.2.2 jdolecek for (i = 0; i < 4; i++) { 1630 1.7.2.2 jdolecek wqbr = IXGBE_READ_REG(hw, IXGBE_WQBR_TX(i)); 1631 1.7.2.2 jdolecek wqbr |= IXGBE_READ_REG(hw, IXGBE_WQBR_RX(i)); 1632 1.7.2.2 jdolecek 1633 1.7.2.2 jdolecek if (!wqbr) 1634 1.7.2.2 jdolecek continue; 1635 1.7.2.2 jdolecek 1636 1.7.2.2 jdolecek /* Get malicious queue */ 1637 1.7.2.2 jdolecek for (j = 0; j < 32 && wqbr; j++) { 1638 1.7.2.2 jdolecek 1639 1.7.2.2 jdolecek if (!(wqbr & (1 << j))) 1640 1.7.2.2 jdolecek continue; 1641 1.7.2.2 jdolecek 1642 1.7.2.2 jdolecek /* Get queue from bitmask */ 1643 1.7.2.2 jdolecek q = j + (i * 32); 1644 1.7.2.2 jdolecek 1645 1.7.2.2 jdolecek /* Map queue to vf */ 1646 1.7.2.2 jdolecek vf = (q >> shift); 1647 1.7.2.2 jdolecek 1648 1.7.2.2 jdolecek /* Set vf bit in vf_bitmap */ 1649 1.7.2.2 jdolecek idx = vf / 32; 1650 1.7.2.2 jdolecek vf_bitmap[idx] |= (1 << (vf % 32)); 1651 1.7.2.2 jdolecek wqbr &= ~(1 << j); 1652 1.7.2.2 jdolecek } 1653 1.7.2.2 jdolecek } 1654 1.7.2.2 jdolecek } 1655 1.7.2.2 jdolecek 1656 1.7.2.2 jdolecek /** 1657 1.7.2.2 jdolecek * ixgbe_get_media_type_X550em - Get media type 1658 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1659 1.7.2.2 jdolecek * 1660 1.7.2.2 jdolecek * Returns the media type (fiber, copper, backplane) 1661 1.7.2.2 jdolecek */ 1662 1.7.2.2 jdolecek enum ixgbe_media_type ixgbe_get_media_type_X550em(struct ixgbe_hw *hw) 1663 1.7.2.2 jdolecek { 1664 1.7.2.2 jdolecek enum ixgbe_media_type media_type; 1665 1.7.2.2 jdolecek 1666 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_get_media_type_X550em"); 1667 1.7.2.2 jdolecek 1668 1.7.2.2 jdolecek /* Detect if there is a copper PHY attached. */ 1669 1.7.2.2 jdolecek switch (hw->device_id) { 1670 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_KR: 1671 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_KX4: 1672 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_XFI: 1673 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_KR: 1674 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_KR_L: 1675 1.7.2.2 jdolecek media_type = ixgbe_media_type_backplane; 1676 1.7.2.2 jdolecek break; 1677 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_SFP: 1678 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_SFP: 1679 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_SFP_N: 1680 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_QSFP: 1681 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_QSFP_N: 1682 1.7.2.2 jdolecek media_type = ixgbe_media_type_fiber; 1683 1.7.2.2 jdolecek break; 1684 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_1G_T: 1685 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_10G_T: 1686 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_10G_T: 1687 1.7.2.2 jdolecek media_type = ixgbe_media_type_copper; 1688 1.7.2.2 jdolecek break; 1689 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_SGMII: 1690 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_SGMII_L: 1691 1.7.2.2 jdolecek media_type = ixgbe_media_type_backplane; 1692 1.7.2.2 jdolecek hw->phy.type = ixgbe_phy_sgmii; 1693 1.7.2.2 jdolecek break; 1694 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_1G_T: 1695 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_1G_T_L: 1696 1.7.2.2 jdolecek media_type = ixgbe_media_type_copper; 1697 1.7.2.2 jdolecek break; 1698 1.7.2.2 jdolecek default: 1699 1.7.2.2 jdolecek media_type = ixgbe_media_type_unknown; 1700 1.7.2.2 jdolecek break; 1701 1.7.2.2 jdolecek } 1702 1.7.2.2 jdolecek return media_type; 1703 1.7.2.2 jdolecek } 1704 1.7.2.2 jdolecek 1705 1.7.2.2 jdolecek /** 1706 1.7.2.2 jdolecek * ixgbe_supported_sfp_modules_X550em - Check if SFP module type is supported 1707 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1708 1.7.2.2 jdolecek * @linear: TRUE if SFP module is linear 1709 1.7.2.2 jdolecek */ 1710 1.7.2.2 jdolecek static s32 ixgbe_supported_sfp_modules_X550em(struct ixgbe_hw *hw, bool *linear) 1711 1.7.2.2 jdolecek { 1712 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_supported_sfp_modules_X550em"); 1713 1.7.2.2 jdolecek 1714 1.7.2.2 jdolecek switch (hw->phy.sfp_type) { 1715 1.7.2.2 jdolecek case ixgbe_sfp_type_not_present: 1716 1.7.2.2 jdolecek return IXGBE_ERR_SFP_NOT_PRESENT; 1717 1.7.2.2 jdolecek case ixgbe_sfp_type_da_cu_core0: 1718 1.7.2.2 jdolecek case ixgbe_sfp_type_da_cu_core1: 1719 1.7.2.2 jdolecek *linear = TRUE; 1720 1.7.2.2 jdolecek break; 1721 1.7.2.2 jdolecek case ixgbe_sfp_type_srlr_core0: 1722 1.7.2.2 jdolecek case ixgbe_sfp_type_srlr_core1: 1723 1.7.2.2 jdolecek case ixgbe_sfp_type_da_act_lmt_core0: 1724 1.7.2.2 jdolecek case ixgbe_sfp_type_da_act_lmt_core1: 1725 1.7.2.2 jdolecek case ixgbe_sfp_type_1g_sx_core0: 1726 1.7.2.2 jdolecek case ixgbe_sfp_type_1g_sx_core1: 1727 1.7.2.2 jdolecek case ixgbe_sfp_type_1g_lx_core0: 1728 1.7.2.2 jdolecek case ixgbe_sfp_type_1g_lx_core1: 1729 1.7.2.2 jdolecek *linear = FALSE; 1730 1.7.2.2 jdolecek break; 1731 1.7.2.2 jdolecek case ixgbe_sfp_type_unknown: 1732 1.7.2.2 jdolecek case ixgbe_sfp_type_1g_cu_core0: 1733 1.7.2.2 jdolecek case ixgbe_sfp_type_1g_cu_core1: 1734 1.7.2.2 jdolecek default: 1735 1.7.2.2 jdolecek return IXGBE_ERR_SFP_NOT_SUPPORTED; 1736 1.7.2.2 jdolecek } 1737 1.7.2.2 jdolecek 1738 1.7.2.2 jdolecek return IXGBE_SUCCESS; 1739 1.7.2.2 jdolecek } 1740 1.7.2.2 jdolecek 1741 1.7.2.2 jdolecek /** 1742 1.7.2.2 jdolecek * ixgbe_identify_sfp_module_X550em - Identifies SFP modules 1743 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1744 1.7.2.2 jdolecek * 1745 1.7.2.2 jdolecek * Searches for and identifies the SFP module and assigns appropriate PHY type. 1746 1.7.2.2 jdolecek **/ 1747 1.7.2.2 jdolecek s32 ixgbe_identify_sfp_module_X550em(struct ixgbe_hw *hw) 1748 1.7.2.2 jdolecek { 1749 1.7.2.2 jdolecek s32 status; 1750 1.7.2.2 jdolecek bool linear; 1751 1.7.2.2 jdolecek 1752 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_identify_sfp_module_X550em"); 1753 1.7.2.2 jdolecek 1754 1.7.2.2 jdolecek status = ixgbe_identify_module_generic(hw); 1755 1.7.2.2 jdolecek 1756 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 1757 1.7.2.2 jdolecek return status; 1758 1.7.2.2 jdolecek 1759 1.7.2.2 jdolecek /* Check if SFP module is supported */ 1760 1.7.2.2 jdolecek status = ixgbe_supported_sfp_modules_X550em(hw, &linear); 1761 1.7.2.2 jdolecek 1762 1.7.2.2 jdolecek return status; 1763 1.7.2.2 jdolecek } 1764 1.7.2.2 jdolecek 1765 1.7.2.2 jdolecek /** 1766 1.7.2.2 jdolecek * ixgbe_setup_sfp_modules_X550em - Setup MAC link ops 1767 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1768 1.7.2.2 jdolecek */ 1769 1.7.2.2 jdolecek s32 ixgbe_setup_sfp_modules_X550em(struct ixgbe_hw *hw) 1770 1.7.2.2 jdolecek { 1771 1.7.2.2 jdolecek s32 status; 1772 1.7.2.2 jdolecek bool linear; 1773 1.7.2.2 jdolecek 1774 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_setup_sfp_modules_X550em"); 1775 1.7.2.2 jdolecek 1776 1.7.2.2 jdolecek /* Check if SFP module is supported */ 1777 1.7.2.2 jdolecek status = ixgbe_supported_sfp_modules_X550em(hw, &linear); 1778 1.7.2.2 jdolecek 1779 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 1780 1.7.2.2 jdolecek return status; 1781 1.7.2.2 jdolecek 1782 1.7.2.2 jdolecek ixgbe_init_mac_link_ops_X550em(hw); 1783 1.7.2.2 jdolecek hw->phy.ops.reset = NULL; 1784 1.7.2.2 jdolecek 1785 1.7.2.2 jdolecek return IXGBE_SUCCESS; 1786 1.7.2.2 jdolecek } 1787 1.7.2.2 jdolecek 1788 1.7.2.2 jdolecek /** 1789 1.7.2.2 jdolecek * ixgbe_restart_an_internal_phy_x550em - restart autonegotiation for the 1790 1.7.2.2 jdolecek * internal PHY 1791 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1792 1.7.2.2 jdolecek **/ 1793 1.7.2.2 jdolecek static s32 ixgbe_restart_an_internal_phy_x550em(struct ixgbe_hw *hw) 1794 1.7.2.2 jdolecek { 1795 1.7.2.2 jdolecek s32 status; 1796 1.7.2.2 jdolecek u32 link_ctrl; 1797 1.7.2.2 jdolecek 1798 1.7.2.2 jdolecek /* Restart auto-negotiation. */ 1799 1.7.2.2 jdolecek status = hw->mac.ops.read_iosf_sb_reg(hw, 1800 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1801 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, &link_ctrl); 1802 1.7.2.2 jdolecek 1803 1.7.2.2 jdolecek if (status) { 1804 1.7.2.2 jdolecek DEBUGOUT("Auto-negotiation did not complete\n"); 1805 1.7.2.2 jdolecek return status; 1806 1.7.2.2 jdolecek } 1807 1.7.2.2 jdolecek 1808 1.7.2.2 jdolecek link_ctrl |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_RESTART; 1809 1.7.2.2 jdolecek status = hw->mac.ops.write_iosf_sb_reg(hw, 1810 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1811 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, link_ctrl); 1812 1.7.2.2 jdolecek 1813 1.7.2.2 jdolecek if (hw->mac.type == ixgbe_mac_X550EM_a) { 1814 1.7.2.2 jdolecek u32 flx_mask_st20; 1815 1.7.2.2 jdolecek 1816 1.7.2.2 jdolecek /* Indicate to FW that AN restart has been asserted */ 1817 1.7.2.2 jdolecek status = hw->mac.ops.read_iosf_sb_reg(hw, 1818 1.7.2.2 jdolecek IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1819 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_mask_st20); 1820 1.7.2.2 jdolecek 1821 1.7.2.2 jdolecek if (status) { 1822 1.7.2.2 jdolecek DEBUGOUT("Auto-negotiation did not complete\n"); 1823 1.7.2.2 jdolecek return status; 1824 1.7.2.2 jdolecek } 1825 1.7.2.2 jdolecek 1826 1.7.2.2 jdolecek flx_mask_st20 |= IXGBE_KRM_PMD_FLX_MASK_ST20_FW_AN_RESTART; 1827 1.7.2.2 jdolecek status = hw->mac.ops.write_iosf_sb_reg(hw, 1828 1.7.2.2 jdolecek IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1829 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, flx_mask_st20); 1830 1.7.2.2 jdolecek } 1831 1.7.2.2 jdolecek 1832 1.7.2.2 jdolecek return status; 1833 1.7.2.2 jdolecek } 1834 1.7.2.2 jdolecek 1835 1.7.2.2 jdolecek /** 1836 1.7.2.2 jdolecek * ixgbe_setup_sgmii - Set up link for sgmii 1837 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1838 1.7.2.2 jdolecek */ 1839 1.7.2.2 jdolecek static s32 ixgbe_setup_sgmii(struct ixgbe_hw *hw, ixgbe_link_speed speed, 1840 1.7.2.2 jdolecek bool autoneg_wait) 1841 1.7.2.2 jdolecek { 1842 1.7.2.2 jdolecek struct ixgbe_mac_info *mac = &hw->mac; 1843 1.7.2.2 jdolecek u32 lval, sval, flx_val; 1844 1.7.2.2 jdolecek s32 rc; 1845 1.7.2.2 jdolecek 1846 1.7.2.2 jdolecek rc = mac->ops.read_iosf_sb_reg(hw, 1847 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1848 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, &lval); 1849 1.7.2.2 jdolecek if (rc) 1850 1.7.2.2 jdolecek return rc; 1851 1.7.2.2 jdolecek 1852 1.7.2.2 jdolecek lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; 1853 1.7.2.2 jdolecek lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; 1854 1.7.2.2 jdolecek lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN; 1855 1.7.2.2 jdolecek lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN; 1856 1.7.2.2 jdolecek lval |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; 1857 1.7.2.2 jdolecek rc = mac->ops.write_iosf_sb_reg(hw, 1858 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1859 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, lval); 1860 1.7.2.2 jdolecek if (rc) 1861 1.7.2.2 jdolecek return rc; 1862 1.7.2.2 jdolecek 1863 1.7.2.2 jdolecek rc = mac->ops.read_iosf_sb_reg(hw, 1864 1.7.2.2 jdolecek IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), 1865 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, &sval); 1866 1.7.2.2 jdolecek if (rc) 1867 1.7.2.2 jdolecek return rc; 1868 1.7.2.2 jdolecek 1869 1.7.2.2 jdolecek sval |= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D; 1870 1.7.2.2 jdolecek sval |= IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D; 1871 1.7.2.2 jdolecek rc = mac->ops.write_iosf_sb_reg(hw, 1872 1.7.2.2 jdolecek IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), 1873 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, sval); 1874 1.7.2.2 jdolecek if (rc) 1875 1.7.2.2 jdolecek return rc; 1876 1.7.2.2 jdolecek 1877 1.7.2.2 jdolecek rc = mac->ops.read_iosf_sb_reg(hw, 1878 1.7.2.2 jdolecek IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1879 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val); 1880 1.7.2.2 jdolecek if (rc) 1881 1.7.2.2 jdolecek return rc; 1882 1.7.2.2 jdolecek 1883 1.7.2.2 jdolecek flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; 1884 1.7.2.2 jdolecek flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G; 1885 1.7.2.2 jdolecek flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; 1886 1.7.2.2 jdolecek flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; 1887 1.7.2.2 jdolecek flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; 1888 1.7.2.2 jdolecek 1889 1.7.2.2 jdolecek rc = mac->ops.write_iosf_sb_reg(hw, 1890 1.7.2.2 jdolecek IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1891 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val); 1892 1.7.2.2 jdolecek if (rc) 1893 1.7.2.2 jdolecek return rc; 1894 1.7.2.2 jdolecek 1895 1.7.2.2 jdolecek rc = ixgbe_restart_an_internal_phy_x550em(hw); 1896 1.7.2.2 jdolecek if (rc) 1897 1.7.2.2 jdolecek return rc; 1898 1.7.2.2 jdolecek 1899 1.7.2.2 jdolecek return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait); 1900 1.7.2.2 jdolecek } 1901 1.7.2.2 jdolecek 1902 1.7.2.2 jdolecek /** 1903 1.7.2.2 jdolecek * ixgbe_setup_sgmii_fw - Set up link for sgmii with firmware-controlled PHYs 1904 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1905 1.7.2.2 jdolecek */ 1906 1.7.2.2 jdolecek static s32 ixgbe_setup_sgmii_fw(struct ixgbe_hw *hw, ixgbe_link_speed speed, 1907 1.7.2.2 jdolecek bool autoneg_wait) 1908 1.7.2.2 jdolecek { 1909 1.7.2.2 jdolecek struct ixgbe_mac_info *mac = &hw->mac; 1910 1.7.2.2 jdolecek u32 lval, sval, flx_val; 1911 1.7.2.2 jdolecek s32 rc; 1912 1.7.2.2 jdolecek 1913 1.7.2.2 jdolecek rc = mac->ops.read_iosf_sb_reg(hw, 1914 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1915 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, &lval); 1916 1.7.2.2 jdolecek if (rc) 1917 1.7.2.2 jdolecek return rc; 1918 1.7.2.2 jdolecek 1919 1.7.2.2 jdolecek lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; 1920 1.7.2.2 jdolecek lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; 1921 1.7.2.2 jdolecek lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_SGMII_EN; 1922 1.7.2.2 jdolecek lval |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CLAUSE_37_EN; 1923 1.7.2.2 jdolecek lval &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; 1924 1.7.2.2 jdolecek rc = mac->ops.write_iosf_sb_reg(hw, 1925 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1926 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, lval); 1927 1.7.2.2 jdolecek if (rc) 1928 1.7.2.2 jdolecek return rc; 1929 1.7.2.2 jdolecek 1930 1.7.2.2 jdolecek rc = mac->ops.read_iosf_sb_reg(hw, 1931 1.7.2.2 jdolecek IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), 1932 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, &sval); 1933 1.7.2.2 jdolecek if (rc) 1934 1.7.2.2 jdolecek return rc; 1935 1.7.2.2 jdolecek 1936 1.7.2.2 jdolecek sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_10_D; 1937 1.7.2.2 jdolecek sval &= ~IXGBE_KRM_SGMII_CTRL_MAC_TAR_FORCE_100_D; 1938 1.7.2.2 jdolecek rc = mac->ops.write_iosf_sb_reg(hw, 1939 1.7.2.2 jdolecek IXGBE_KRM_SGMII_CTRL(hw->bus.lan_id), 1940 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, sval); 1941 1.7.2.2 jdolecek if (rc) 1942 1.7.2.2 jdolecek return rc; 1943 1.7.2.2 jdolecek 1944 1.7.2.2 jdolecek rc = mac->ops.write_iosf_sb_reg(hw, 1945 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 1946 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, lval); 1947 1.7.2.2 jdolecek if (rc) 1948 1.7.2.2 jdolecek return rc; 1949 1.7.2.2 jdolecek 1950 1.7.2.2 jdolecek rc = mac->ops.read_iosf_sb_reg(hw, 1951 1.7.2.2 jdolecek IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1952 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, &flx_val); 1953 1.7.2.2 jdolecek if (rc) 1954 1.7.2.2 jdolecek return rc; 1955 1.7.2.2 jdolecek 1956 1.7.2.2 jdolecek flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; 1957 1.7.2.2 jdolecek flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN; 1958 1.7.2.2 jdolecek flx_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; 1959 1.7.2.2 jdolecek flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; 1960 1.7.2.2 jdolecek flx_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; 1961 1.7.2.2 jdolecek 1962 1.7.2.2 jdolecek rc = mac->ops.write_iosf_sb_reg(hw, 1963 1.7.2.2 jdolecek IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 1964 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, flx_val); 1965 1.7.2.2 jdolecek if (rc) 1966 1.7.2.2 jdolecek return rc; 1967 1.7.2.2 jdolecek 1968 1.7.2.2 jdolecek rc = ixgbe_restart_an_internal_phy_x550em(hw); 1969 1.7.2.2 jdolecek 1970 1.7.2.2 jdolecek return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait); 1971 1.7.2.2 jdolecek } 1972 1.7.2.2 jdolecek 1973 1.7.2.2 jdolecek /** 1974 1.7.2.2 jdolecek * ixgbe_init_mac_link_ops_X550em - init mac link function pointers 1975 1.7.2.2 jdolecek * @hw: pointer to hardware structure 1976 1.7.2.2 jdolecek */ 1977 1.7.2.2 jdolecek void ixgbe_init_mac_link_ops_X550em(struct ixgbe_hw *hw) 1978 1.7.2.2 jdolecek { 1979 1.7.2.2 jdolecek struct ixgbe_mac_info *mac = &hw->mac; 1980 1.7.2.2 jdolecek 1981 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_init_mac_link_ops_X550em"); 1982 1.7.2.2 jdolecek 1983 1.7.2.2 jdolecek switch (hw->mac.ops.get_media_type(hw)) { 1984 1.7.2.2 jdolecek case ixgbe_media_type_fiber: 1985 1.7.2.2 jdolecek /* CS4227 does not support autoneg, so disable the laser control 1986 1.7.2.2 jdolecek * functions for SFP+ fiber 1987 1.7.2.2 jdolecek */ 1988 1.7.2.2 jdolecek mac->ops.disable_tx_laser = NULL; 1989 1.7.2.2 jdolecek mac->ops.enable_tx_laser = NULL; 1990 1.7.2.2 jdolecek mac->ops.flap_tx_laser = NULL; 1991 1.7.2.2 jdolecek mac->ops.setup_link = ixgbe_setup_mac_link_multispeed_fiber; 1992 1.7.2.2 jdolecek mac->ops.set_rate_select_speed = 1993 1.7.2.2 jdolecek ixgbe_set_soft_rate_select_speed; 1994 1.7.2.2 jdolecek 1995 1.7.2.2 jdolecek if ((hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP_N) || 1996 1.7.2.2 jdolecek (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP)) 1997 1.7.2.2 jdolecek mac->ops.setup_mac_link = 1998 1.7.2.2 jdolecek ixgbe_setup_mac_link_sfp_x550a; 1999 1.7.2.2 jdolecek else 2000 1.7.2.2 jdolecek mac->ops.setup_mac_link = 2001 1.7.2.2 jdolecek ixgbe_setup_mac_link_sfp_x550em; 2002 1.7.2.2 jdolecek break; 2003 1.7.2.2 jdolecek case ixgbe_media_type_copper: 2004 1.7.2.2 jdolecek if (hw->device_id == IXGBE_DEV_ID_X550EM_X_1G_T) 2005 1.7.2.2 jdolecek break; 2006 1.7.2.2 jdolecek if (hw->mac.type == ixgbe_mac_X550EM_a) { 2007 1.7.2.2 jdolecek if (hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T || 2008 1.7.2.2 jdolecek hw->device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L) { 2009 1.7.2.2 jdolecek mac->ops.setup_link = ixgbe_setup_sgmii_fw; 2010 1.7.2.2 jdolecek mac->ops.check_link = 2011 1.7.2.2 jdolecek ixgbe_check_mac_link_generic; 2012 1.7.2.2 jdolecek } else { 2013 1.7.2.2 jdolecek mac->ops.setup_link = 2014 1.7.2.2 jdolecek ixgbe_setup_mac_link_t_X550em; 2015 1.7.2.2 jdolecek } 2016 1.7.2.2 jdolecek } else { 2017 1.7.2.2 jdolecek mac->ops.setup_link = ixgbe_setup_mac_link_t_X550em; 2018 1.7.2.2 jdolecek mac->ops.check_link = ixgbe_check_link_t_X550em; 2019 1.7.2.2 jdolecek } 2020 1.7.2.2 jdolecek break; 2021 1.7.2.2 jdolecek case ixgbe_media_type_backplane: 2022 1.7.2.2 jdolecek if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII || 2023 1.7.2.2 jdolecek hw->device_id == IXGBE_DEV_ID_X550EM_A_SGMII_L) 2024 1.7.2.2 jdolecek mac->ops.setup_link = ixgbe_setup_sgmii; 2025 1.7.2.2 jdolecek break; 2026 1.7.2.2 jdolecek default: 2027 1.7.2.2 jdolecek break; 2028 1.7.2.2 jdolecek } 2029 1.7.2.2 jdolecek } 2030 1.7.2.2 jdolecek 2031 1.7.2.2 jdolecek /** 2032 1.7.2.2 jdolecek * ixgbe_get_link_capabilities_x550em - Determines link capabilities 2033 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2034 1.7.2.2 jdolecek * @speed: pointer to link speed 2035 1.7.2.2 jdolecek * @autoneg: TRUE when autoneg or autotry is enabled 2036 1.7.2.2 jdolecek */ 2037 1.7.2.2 jdolecek s32 ixgbe_get_link_capabilities_X550em(struct ixgbe_hw *hw, 2038 1.7.2.2 jdolecek ixgbe_link_speed *speed, 2039 1.7.2.2 jdolecek bool *autoneg) 2040 1.7.2.2 jdolecek { 2041 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_get_link_capabilities_X550em"); 2042 1.7.2.2 jdolecek 2043 1.7.2.2 jdolecek 2044 1.7.2.2 jdolecek if (hw->phy.type == ixgbe_phy_fw) { 2045 1.7.2.2 jdolecek *autoneg = TRUE; 2046 1.7.2.2 jdolecek *speed = hw->phy.speeds_supported; 2047 1.7.2.2 jdolecek return 0; 2048 1.7.2.2 jdolecek } 2049 1.7.2.2 jdolecek 2050 1.7.2.2 jdolecek /* SFP */ 2051 1.7.2.2 jdolecek if (hw->phy.media_type == ixgbe_media_type_fiber) { 2052 1.7.2.2 jdolecek 2053 1.7.2.2 jdolecek /* CS4227 SFP must not enable auto-negotiation */ 2054 1.7.2.2 jdolecek *autoneg = FALSE; 2055 1.7.2.2 jdolecek 2056 1.7.2.2 jdolecek /* Check if 1G SFP module. */ 2057 1.7.2.2 jdolecek if (hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core0 || 2058 1.7.2.2 jdolecek hw->phy.sfp_type == ixgbe_sfp_type_1g_sx_core1 2059 1.7.2.2 jdolecek || hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core0 || 2060 1.7.2.2 jdolecek hw->phy.sfp_type == ixgbe_sfp_type_1g_lx_core1) { 2061 1.7.2.2 jdolecek *speed = IXGBE_LINK_SPEED_1GB_FULL; 2062 1.7.2.2 jdolecek return IXGBE_SUCCESS; 2063 1.7.2.2 jdolecek } 2064 1.7.2.2 jdolecek 2065 1.7.2.2 jdolecek /* Link capabilities are based on SFP */ 2066 1.7.2.2 jdolecek if (hw->phy.multispeed_fiber) 2067 1.7.2.2 jdolecek *speed = IXGBE_LINK_SPEED_10GB_FULL | 2068 1.7.2.2 jdolecek IXGBE_LINK_SPEED_1GB_FULL; 2069 1.7.2.2 jdolecek else 2070 1.7.2.2 jdolecek *speed = IXGBE_LINK_SPEED_10GB_FULL; 2071 1.7.2.2 jdolecek } else { 2072 1.7.2.2 jdolecek switch (hw->phy.type) { 2073 1.7.2.2 jdolecek case ixgbe_phy_ext_1g_t: 2074 1.7.2.2 jdolecek case ixgbe_phy_sgmii: 2075 1.7.2.2 jdolecek *speed = IXGBE_LINK_SPEED_1GB_FULL; 2076 1.7.2.2 jdolecek break; 2077 1.7.2.2 jdolecek case ixgbe_phy_x550em_kr: 2078 1.7.2.2 jdolecek if (hw->mac.type == ixgbe_mac_X550EM_a) { 2079 1.7.2.2 jdolecek /* check different backplane modes */ 2080 1.7.2.2 jdolecek if (hw->phy.nw_mng_if_sel & 2081 1.7.2.2 jdolecek IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G) { 2082 1.7.2.2 jdolecek *speed = IXGBE_LINK_SPEED_2_5GB_FULL; 2083 1.7.2.2 jdolecek break; 2084 1.7.2.2 jdolecek } else if (hw->device_id == 2085 1.7.2.2 jdolecek IXGBE_DEV_ID_X550EM_A_KR_L) { 2086 1.7.2.2 jdolecek *speed = IXGBE_LINK_SPEED_1GB_FULL; 2087 1.7.2.2 jdolecek break; 2088 1.7.2.2 jdolecek } 2089 1.7.2.2 jdolecek } 2090 1.7.2.2 jdolecek /* fall through */ 2091 1.7.2.2 jdolecek default: 2092 1.7.2.2 jdolecek *speed = IXGBE_LINK_SPEED_10GB_FULL | 2093 1.7.2.2 jdolecek IXGBE_LINK_SPEED_1GB_FULL; 2094 1.7.2.2 jdolecek break; 2095 1.7.2.2 jdolecek } 2096 1.7.2.2 jdolecek *autoneg = TRUE; 2097 1.7.2.2 jdolecek } 2098 1.7.2.2 jdolecek 2099 1.7.2.2 jdolecek return IXGBE_SUCCESS; 2100 1.7.2.2 jdolecek } 2101 1.7.2.2 jdolecek 2102 1.7.2.2 jdolecek /** 2103 1.7.2.2 jdolecek * ixgbe_get_lasi_ext_t_x550em - Determime external Base T PHY interrupt cause 2104 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2105 1.7.2.2 jdolecek * @lsc: pointer to boolean flag which indicates whether external Base T 2106 1.7.2.2 jdolecek * PHY interrupt is lsc 2107 1.7.2.2 jdolecek * 2108 1.7.2.2 jdolecek * Determime if external Base T PHY interrupt cause is high temperature 2109 1.7.2.2 jdolecek * failure alarm or link status change. 2110 1.7.2.2 jdolecek * 2111 1.7.2.2 jdolecek * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature 2112 1.7.2.2 jdolecek * failure alarm, else return PHY access status. 2113 1.7.2.2 jdolecek */ 2114 1.7.2.2 jdolecek static s32 ixgbe_get_lasi_ext_t_x550em(struct ixgbe_hw *hw, bool *lsc) 2115 1.7.2.2 jdolecek { 2116 1.7.2.2 jdolecek u32 status; 2117 1.7.2.2 jdolecek u16 reg; 2118 1.7.2.2 jdolecek 2119 1.7.2.2 jdolecek *lsc = FALSE; 2120 1.7.2.2 jdolecek 2121 1.7.2.2 jdolecek /* Vendor alarm triggered */ 2122 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG, 2123 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2124 1.7.2.2 jdolecek ®); 2125 1.7.2.2 jdolecek 2126 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS || 2127 1.7.2.2 jdolecek !(reg & IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN)) 2128 1.7.2.2 jdolecek return status; 2129 1.7.2.2 jdolecek 2130 1.7.2.2 jdolecek /* Vendor Auto-Neg alarm triggered or Global alarm 1 triggered */ 2131 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_FLAG, 2132 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2133 1.7.2.2 jdolecek ®); 2134 1.7.2.2 jdolecek 2135 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS || 2136 1.7.2.2 jdolecek !(reg & (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN | 2137 1.7.2.2 jdolecek IXGBE_MDIO_GLOBAL_ALARM_1_INT))) 2138 1.7.2.2 jdolecek return status; 2139 1.7.2.2 jdolecek 2140 1.7.2.2 jdolecek /* Global alarm triggered */ 2141 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_ALARM_1, 2142 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2143 1.7.2.2 jdolecek ®); 2144 1.7.2.2 jdolecek 2145 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2146 1.7.2.2 jdolecek return status; 2147 1.7.2.2 jdolecek 2148 1.7.2.2 jdolecek /* If high temperature failure, then return over temp error and exit */ 2149 1.7.2.2 jdolecek if (reg & IXGBE_MDIO_GLOBAL_ALM_1_HI_TMP_FAIL) { 2150 1.7.2.2 jdolecek /* power down the PHY in case the PHY FW didn't already */ 2151 1.7.2.2 jdolecek ixgbe_set_copper_phy_power(hw, FALSE); 2152 1.7.2.2 jdolecek return IXGBE_ERR_OVERTEMP; 2153 1.7.2.2 jdolecek } else if (reg & IXGBE_MDIO_GLOBAL_ALM_1_DEV_FAULT) { 2154 1.7.2.2 jdolecek /* device fault alarm triggered */ 2155 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_FAULT_MSG, 2156 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2157 1.7.2.2 jdolecek ®); 2158 1.7.2.2 jdolecek 2159 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2160 1.7.2.2 jdolecek return status; 2161 1.7.2.2 jdolecek 2162 1.7.2.2 jdolecek /* if device fault was due to high temp alarm handle and exit */ 2163 1.7.2.2 jdolecek if (reg == IXGBE_MDIO_GLOBAL_FAULT_MSG_HI_TMP) { 2164 1.7.2.2 jdolecek /* power down the PHY in case the PHY FW didn't */ 2165 1.7.2.2 jdolecek ixgbe_set_copper_phy_power(hw, FALSE); 2166 1.7.2.2 jdolecek return IXGBE_ERR_OVERTEMP; 2167 1.7.2.2 jdolecek } 2168 1.7.2.2 jdolecek } 2169 1.7.2.2 jdolecek 2170 1.7.2.2 jdolecek /* Vendor alarm 2 triggered */ 2171 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_CHIP_STD_INT_FLAG, 2172 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); 2173 1.7.2.2 jdolecek 2174 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS || 2175 1.7.2.2 jdolecek !(reg & IXGBE_MDIO_GLOBAL_STD_ALM2_INT)) 2176 1.7.2.2 jdolecek return status; 2177 1.7.2.2 jdolecek 2178 1.7.2.2 jdolecek /* link connect/disconnect event occurred */ 2179 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM2, 2180 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); 2181 1.7.2.2 jdolecek 2182 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2183 1.7.2.2 jdolecek return status; 2184 1.7.2.2 jdolecek 2185 1.7.2.2 jdolecek /* Indicate LSC */ 2186 1.7.2.2 jdolecek if (reg & IXGBE_MDIO_AUTO_NEG_VEN_LSC) 2187 1.7.2.2 jdolecek *lsc = TRUE; 2188 1.7.2.2 jdolecek 2189 1.7.2.2 jdolecek return IXGBE_SUCCESS; 2190 1.7.2.2 jdolecek } 2191 1.7.2.2 jdolecek 2192 1.7.2.2 jdolecek /** 2193 1.7.2.2 jdolecek * ixgbe_enable_lasi_ext_t_x550em - Enable external Base T PHY interrupts 2194 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2195 1.7.2.2 jdolecek * 2196 1.7.2.2 jdolecek * Enable link status change and temperature failure alarm for the external 2197 1.7.2.2 jdolecek * Base T PHY 2198 1.7.2.2 jdolecek * 2199 1.7.2.2 jdolecek * Returns PHY access status 2200 1.7.2.2 jdolecek */ 2201 1.7.2.2 jdolecek static s32 ixgbe_enable_lasi_ext_t_x550em(struct ixgbe_hw *hw) 2202 1.7.2.2 jdolecek { 2203 1.7.2.2 jdolecek u32 status; 2204 1.7.2.2 jdolecek u16 reg; 2205 1.7.2.2 jdolecek bool lsc; 2206 1.7.2.2 jdolecek 2207 1.7.2.2 jdolecek /* Clear interrupt flags */ 2208 1.7.2.2 jdolecek status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); 2209 1.7.2.2 jdolecek 2210 1.7.2.2 jdolecek /* Enable link status change alarm */ 2211 1.7.2.2 jdolecek 2212 1.7.2.2 jdolecek /* Enable the LASI interrupts on X552 devices to receive notifications 2213 1.7.2.2 jdolecek * of the link configurations of the external PHY and correspondingly 2214 1.7.2.2 jdolecek * support the configuration of the internal iXFI link, since iXFI does 2215 1.7.2.2 jdolecek * not support auto-negotiation. This is not required for X553 devices 2216 1.7.2.2 jdolecek * having KR support, which performs auto-negotiations and which is used 2217 1.7.2.2 jdolecek * as the internal link to the external PHY. Hence adding a check here 2218 1.7.2.2 jdolecek * to avoid enabling LASI interrupts for X553 devices. 2219 1.7.2.2 jdolecek */ 2220 1.7.2.2 jdolecek if (hw->mac.type != ixgbe_mac_X550EM_a) { 2221 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, 2222 1.7.2.2 jdolecek IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, 2223 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, ®); 2224 1.7.2.2 jdolecek 2225 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2226 1.7.2.2 jdolecek return status; 2227 1.7.2.2 jdolecek 2228 1.7.2.2 jdolecek reg |= IXGBE_MDIO_PMA_TX_VEN_LASI_INT_EN; 2229 1.7.2.2 jdolecek 2230 1.7.2.2 jdolecek status = hw->phy.ops.write_reg(hw, 2231 1.7.2.2 jdolecek IXGBE_MDIO_PMA_TX_VEN_LASI_INT_MASK, 2232 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, reg); 2233 1.7.2.2 jdolecek 2234 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2235 1.7.2.2 jdolecek return status; 2236 1.7.2.2 jdolecek } 2237 1.7.2.2 jdolecek 2238 1.7.2.2 jdolecek /* Enable high temperature failure and global fault alarms */ 2239 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, 2240 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2241 1.7.2.2 jdolecek ®); 2242 1.7.2.2 jdolecek 2243 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2244 1.7.2.2 jdolecek return status; 2245 1.7.2.2 jdolecek 2246 1.7.2.2 jdolecek reg |= (IXGBE_MDIO_GLOBAL_INT_HI_TEMP_EN | 2247 1.7.2.2 jdolecek IXGBE_MDIO_GLOBAL_INT_DEV_FAULT_EN); 2248 1.7.2.2 jdolecek 2249 1.7.2.2 jdolecek status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_MASK, 2250 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2251 1.7.2.2 jdolecek reg); 2252 1.7.2.2 jdolecek 2253 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2254 1.7.2.2 jdolecek return status; 2255 1.7.2.2 jdolecek 2256 1.7.2.2 jdolecek /* Enable vendor Auto-Neg alarm and Global Interrupt Mask 1 alarm */ 2257 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK, 2258 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2259 1.7.2.2 jdolecek ®); 2260 1.7.2.2 jdolecek 2261 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2262 1.7.2.2 jdolecek return status; 2263 1.7.2.2 jdolecek 2264 1.7.2.2 jdolecek reg |= (IXGBE_MDIO_GLOBAL_AN_VEN_ALM_INT_EN | 2265 1.7.2.2 jdolecek IXGBE_MDIO_GLOBAL_ALARM_1_INT); 2266 1.7.2.2 jdolecek 2267 1.7.2.2 jdolecek status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_VEN_MASK, 2268 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2269 1.7.2.2 jdolecek reg); 2270 1.7.2.2 jdolecek 2271 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2272 1.7.2.2 jdolecek return status; 2273 1.7.2.2 jdolecek 2274 1.7.2.2 jdolecek /* Enable chip-wide vendor alarm */ 2275 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK, 2276 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2277 1.7.2.2 jdolecek ®); 2278 1.7.2.2 jdolecek 2279 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2280 1.7.2.2 jdolecek return status; 2281 1.7.2.2 jdolecek 2282 1.7.2.2 jdolecek reg |= IXGBE_MDIO_GLOBAL_VEN_ALM_INT_EN; 2283 1.7.2.2 jdolecek 2284 1.7.2.2 jdolecek status = hw->phy.ops.write_reg(hw, IXGBE_MDIO_GLOBAL_INT_CHIP_STD_MASK, 2285 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2286 1.7.2.2 jdolecek reg); 2287 1.7.2.2 jdolecek 2288 1.7.2.2 jdolecek return status; 2289 1.7.2.2 jdolecek } 2290 1.7.2.2 jdolecek 2291 1.7.2.2 jdolecek /** 2292 1.7.2.2 jdolecek * ixgbe_setup_kr_speed_x550em - Configure the KR PHY for link speed. 2293 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2294 1.7.2.2 jdolecek * @speed: link speed 2295 1.7.2.2 jdolecek * 2296 1.7.2.2 jdolecek * Configures the integrated KR PHY. 2297 1.7.2.2 jdolecek **/ 2298 1.7.2.2 jdolecek static s32 ixgbe_setup_kr_speed_x550em(struct ixgbe_hw *hw, 2299 1.7.2.2 jdolecek ixgbe_link_speed speed) 2300 1.7.2.2 jdolecek { 2301 1.7.2.2 jdolecek s32 status; 2302 1.7.2.2 jdolecek u32 reg_val; 2303 1.7.2.2 jdolecek 2304 1.7.2.2 jdolecek status = hw->mac.ops.read_iosf_sb_reg(hw, 2305 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 2306 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 2307 1.7.2.2 jdolecek if (status) 2308 1.7.2.2 jdolecek return status; 2309 1.7.2.2 jdolecek 2310 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; 2311 1.7.2.2 jdolecek reg_val &= ~(IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR | 2312 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX); 2313 1.7.2.2 jdolecek 2314 1.7.2.2 jdolecek /* Advertise 10G support. */ 2315 1.7.2.2 jdolecek if (speed & IXGBE_LINK_SPEED_10GB_FULL) 2316 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KR; 2317 1.7.2.2 jdolecek 2318 1.7.2.2 jdolecek /* Advertise 1G support. */ 2319 1.7.2.2 jdolecek if (speed & IXGBE_LINK_SPEED_1GB_FULL) 2320 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_AN_CAP_KX; 2321 1.7.2.2 jdolecek 2322 1.7.2.2 jdolecek status = hw->mac.ops.write_iosf_sb_reg(hw, 2323 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 2324 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 2325 1.7.2.2 jdolecek 2326 1.7.2.2 jdolecek if (hw->mac.type == ixgbe_mac_X550EM_a) { 2327 1.7.2.2 jdolecek /* Set lane mode to KR auto negotiation */ 2328 1.7.2.2 jdolecek status = hw->mac.ops.read_iosf_sb_reg(hw, 2329 1.7.2.2 jdolecek IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 2330 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 2331 1.7.2.2 jdolecek 2332 1.7.2.2 jdolecek if (status) 2333 1.7.2.2 jdolecek return status; 2334 1.7.2.2 jdolecek 2335 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; 2336 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_AN; 2337 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; 2338 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; 2339 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; 2340 1.7.2.2 jdolecek 2341 1.7.2.2 jdolecek status = hw->mac.ops.write_iosf_sb_reg(hw, 2342 1.7.2.2 jdolecek IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 2343 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 2344 1.7.2.2 jdolecek } 2345 1.7.2.2 jdolecek 2346 1.7.2.2 jdolecek return ixgbe_restart_an_internal_phy_x550em(hw); 2347 1.7.2.2 jdolecek } 2348 1.7.2.2 jdolecek 2349 1.7.2.2 jdolecek /** 2350 1.7.2.2 jdolecek * ixgbe_reset_phy_fw - Reset firmware-controlled PHYs 2351 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2352 1.7.2.2 jdolecek */ 2353 1.7.2.2 jdolecek static s32 ixgbe_reset_phy_fw(struct ixgbe_hw *hw) 2354 1.7.2.2 jdolecek { 2355 1.7.2.2 jdolecek u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 }; 2356 1.7.2.2 jdolecek s32 rc; 2357 1.7.2.2 jdolecek 2358 1.7.2.2 jdolecek if (hw->phy.reset_disable || ixgbe_check_reset_blocked(hw)) 2359 1.7.2.2 jdolecek return IXGBE_SUCCESS; 2360 1.7.2.2 jdolecek 2361 1.7.2.2 jdolecek rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_PHY_SW_RESET, &store); 2362 1.7.2.2 jdolecek if (rc) 2363 1.7.2.2 jdolecek return rc; 2364 1.7.2.2 jdolecek memset(store, 0, sizeof(store)); 2365 1.7.2.2 jdolecek 2366 1.7.2.2 jdolecek rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_INIT_PHY, &store); 2367 1.7.2.2 jdolecek if (rc) 2368 1.7.2.2 jdolecek return rc; 2369 1.7.2.2 jdolecek 2370 1.7.2.2 jdolecek return ixgbe_setup_fw_link(hw); 2371 1.7.2.2 jdolecek } 2372 1.7.2.2 jdolecek 2373 1.7.2.2 jdolecek /** 2374 1.7.2.2 jdolecek * ixgbe_check_overtemp_fw - Check firmware-controlled PHYs for overtemp 2375 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2376 1.7.2.2 jdolecek */ 2377 1.7.2.2 jdolecek static s32 ixgbe_check_overtemp_fw(struct ixgbe_hw *hw) 2378 1.7.2.2 jdolecek { 2379 1.7.2.2 jdolecek u32 store[FW_PHY_ACT_DATA_COUNT] = { 0 }; 2380 1.7.2.2 jdolecek s32 rc; 2381 1.7.2.2 jdolecek 2382 1.7.2.2 jdolecek rc = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &store); 2383 1.7.2.2 jdolecek if (rc) 2384 1.7.2.2 jdolecek return rc; 2385 1.7.2.2 jdolecek 2386 1.7.2.2 jdolecek if (store[0] & FW_PHY_ACT_GET_LINK_INFO_TEMP) { 2387 1.7.2.2 jdolecek ixgbe_shutdown_fw_phy(hw); 2388 1.7.2.2 jdolecek return IXGBE_ERR_OVERTEMP; 2389 1.7.2.2 jdolecek } 2390 1.7.2.2 jdolecek return IXGBE_SUCCESS; 2391 1.7.2.2 jdolecek } 2392 1.7.2.2 jdolecek 2393 1.7.2.2 jdolecek /** 2394 1.7.2.2 jdolecek * ixgbe_read_mng_if_sel_x550em - Read NW_MNG_IF_SEL register 2395 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2396 1.7.2.2 jdolecek * 2397 1.7.2.2 jdolecek * Read NW_MNG_IF_SEL register and save field values, and check for valid field 2398 1.7.2.2 jdolecek * values. 2399 1.7.2.2 jdolecek **/ 2400 1.7.2.2 jdolecek static s32 ixgbe_read_mng_if_sel_x550em(struct ixgbe_hw *hw) 2401 1.7.2.2 jdolecek { 2402 1.7.2.2 jdolecek /* Save NW management interface connected on board. This is used 2403 1.7.2.2 jdolecek * to determine internal PHY mode. 2404 1.7.2.2 jdolecek */ 2405 1.7.2.2 jdolecek hw->phy.nw_mng_if_sel = IXGBE_READ_REG(hw, IXGBE_NW_MNG_IF_SEL); 2406 1.7.2.2 jdolecek 2407 1.7.2.2 jdolecek /* If X552 (X550EM_a) and MDIO is connected to external PHY, then set 2408 1.7.2.2 jdolecek * PHY address. This register field was has only been used for X552. 2409 1.7.2.2 jdolecek */ 2410 1.7.2.2 jdolecek if (hw->mac.type == ixgbe_mac_X550EM_a && 2411 1.7.2.2 jdolecek hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_MDIO_ACT) { 2412 1.7.2.2 jdolecek hw->phy.addr = (hw->phy.nw_mng_if_sel & 2413 1.7.2.2 jdolecek IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD) >> 2414 1.7.2.2 jdolecek IXGBE_NW_MNG_IF_SEL_MDIO_PHY_ADD_SHIFT; 2415 1.7.2.2 jdolecek } 2416 1.7.2.2 jdolecek 2417 1.7.2.2 jdolecek return IXGBE_SUCCESS; 2418 1.7.2.2 jdolecek } 2419 1.7.2.2 jdolecek 2420 1.7.2.2 jdolecek /** 2421 1.7.2.2 jdolecek * ixgbe_init_phy_ops_X550em - PHY/SFP specific init 2422 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2423 1.7.2.2 jdolecek * 2424 1.7.2.2 jdolecek * Initialize any function pointers that were not able to be 2425 1.7.2.2 jdolecek * set during init_shared_code because the PHY/SFP type was 2426 1.7.2.2 jdolecek * not known. Perform the SFP init if necessary. 2427 1.7.2.2 jdolecek */ 2428 1.7.2.2 jdolecek s32 ixgbe_init_phy_ops_X550em(struct ixgbe_hw *hw) 2429 1.7.2.2 jdolecek { 2430 1.7.2.2 jdolecek struct ixgbe_phy_info *phy = &hw->phy; 2431 1.7.2.2 jdolecek s32 ret_val; 2432 1.7.2.2 jdolecek 2433 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_init_phy_ops_X550em"); 2434 1.7.2.2 jdolecek 2435 1.7.2.2 jdolecek hw->mac.ops.set_lan_id(hw); 2436 1.7.2.2 jdolecek ixgbe_read_mng_if_sel_x550em(hw); 2437 1.7.2.2 jdolecek 2438 1.7.2.2 jdolecek if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) { 2439 1.7.2.2 jdolecek phy->phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; 2440 1.7.2.2 jdolecek ixgbe_setup_mux_ctl(hw); 2441 1.7.2.2 jdolecek phy->ops.identify_sfp = ixgbe_identify_sfp_module_X550em; 2442 1.7.2.2 jdolecek } 2443 1.7.2.2 jdolecek 2444 1.7.2.2 jdolecek switch (hw->device_id) { 2445 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_1G_T: 2446 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_1G_T_L: 2447 1.7.2.2 jdolecek phy->ops.read_reg_mdi = ixgbe_read_phy_reg_mdi_22; 2448 1.7.2.2 jdolecek phy->ops.write_reg_mdi = ixgbe_write_phy_reg_mdi_22; 2449 1.7.2.2 jdolecek hw->phy.ops.read_reg = ixgbe_read_phy_reg_x550a; 2450 1.7.2.2 jdolecek hw->phy.ops.write_reg = ixgbe_write_phy_reg_x550a; 2451 1.7.2.2 jdolecek phy->ops.check_overtemp = ixgbe_check_overtemp_fw; 2452 1.7.2.2 jdolecek if (hw->bus.lan_id) 2453 1.7.2.2 jdolecek hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; 2454 1.7.2.2 jdolecek else 2455 1.7.2.2 jdolecek hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM; 2456 1.7.2.2 jdolecek 2457 1.7.2.2 jdolecek break; 2458 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_10G_T: 2459 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_SFP: 2460 1.7.2.2 jdolecek hw->phy.ops.read_reg = ixgbe_read_phy_reg_x550a; 2461 1.7.2.2 jdolecek hw->phy.ops.write_reg = ixgbe_write_phy_reg_x550a; 2462 1.7.2.2 jdolecek if (hw->bus.lan_id) 2463 1.7.2.2 jdolecek hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY1_SM; 2464 1.7.2.2 jdolecek else 2465 1.7.2.2 jdolecek hw->phy.phy_semaphore_mask |= IXGBE_GSSR_PHY0_SM; 2466 1.7.2.2 jdolecek break; 2467 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_SFP: 2468 1.7.2.2 jdolecek /* set up for CS4227 usage */ 2469 1.7.2.2 jdolecek hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; 2470 1.7.2.2 jdolecek break; 2471 1.7.2.2 jdolecek default: 2472 1.7.2.2 jdolecek break; 2473 1.7.2.2 jdolecek } 2474 1.7.2.2 jdolecek 2475 1.7.2.2 jdolecek /* Identify the PHY or SFP module */ 2476 1.7.2.2 jdolecek ret_val = phy->ops.identify(hw); 2477 1.7.2.2 jdolecek if (ret_val == IXGBE_ERR_SFP_NOT_SUPPORTED || 2478 1.7.2.2 jdolecek ret_val == IXGBE_ERR_PHY_ADDR_INVALID) 2479 1.7.2.2 jdolecek return ret_val; 2480 1.7.2.2 jdolecek 2481 1.7.2.2 jdolecek /* Setup function pointers based on detected hardware */ 2482 1.7.2.2 jdolecek ixgbe_init_mac_link_ops_X550em(hw); 2483 1.7.2.2 jdolecek if (phy->sfp_type != ixgbe_sfp_type_unknown) 2484 1.7.2.2 jdolecek phy->ops.reset = NULL; 2485 1.7.2.2 jdolecek 2486 1.7.2.2 jdolecek /* Set functions pointers based on phy type */ 2487 1.7.2.2 jdolecek switch (hw->phy.type) { 2488 1.7.2.2 jdolecek case ixgbe_phy_x550em_kx4: 2489 1.7.2.2 jdolecek phy->ops.setup_link = NULL; 2490 1.7.2.2 jdolecek phy->ops.read_reg = ixgbe_read_phy_reg_x550em; 2491 1.7.2.2 jdolecek phy->ops.write_reg = ixgbe_write_phy_reg_x550em; 2492 1.7.2.2 jdolecek break; 2493 1.7.2.2 jdolecek case ixgbe_phy_x550em_kr: 2494 1.7.2.2 jdolecek phy->ops.setup_link = ixgbe_setup_kr_x550em; 2495 1.7.2.2 jdolecek phy->ops.read_reg = ixgbe_read_phy_reg_x550em; 2496 1.7.2.2 jdolecek phy->ops.write_reg = ixgbe_write_phy_reg_x550em; 2497 1.7.2.2 jdolecek break; 2498 1.7.2.2 jdolecek case ixgbe_phy_ext_1g_t: 2499 1.7.2.2 jdolecek /* link is managed by FW */ 2500 1.7.2.2 jdolecek phy->ops.setup_link = NULL; 2501 1.7.2.2 jdolecek phy->ops.reset = NULL; 2502 1.7.2.2 jdolecek break; 2503 1.7.2.2 jdolecek case ixgbe_phy_x550em_xfi: 2504 1.7.2.2 jdolecek /* link is managed by HW */ 2505 1.7.2.2 jdolecek phy->ops.setup_link = NULL; 2506 1.7.2.2 jdolecek phy->ops.read_reg = ixgbe_read_phy_reg_x550em; 2507 1.7.2.2 jdolecek phy->ops.write_reg = ixgbe_write_phy_reg_x550em; 2508 1.7.2.2 jdolecek break; 2509 1.7.2.2 jdolecek case ixgbe_phy_x550em_ext_t: 2510 1.7.2.2 jdolecek /* If internal link mode is XFI, then setup iXFI internal link, 2511 1.7.2.2 jdolecek * else setup KR now. 2512 1.7.2.2 jdolecek */ 2513 1.7.2.2 jdolecek phy->ops.setup_internal_link = 2514 1.7.2.2 jdolecek ixgbe_setup_internal_phy_t_x550em; 2515 1.7.2.2 jdolecek 2516 1.7.2.2 jdolecek /* setup SW LPLU only for first revision of X550EM_x */ 2517 1.7.2.2 jdolecek if ((hw->mac.type == ixgbe_mac_X550EM_x) && 2518 1.7.2.2 jdolecek !(IXGBE_FUSES0_REV_MASK & 2519 1.7.2.2 jdolecek IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))) 2520 1.7.2.2 jdolecek phy->ops.enter_lplu = ixgbe_enter_lplu_t_x550em; 2521 1.7.2.2 jdolecek 2522 1.7.2.2 jdolecek phy->ops.handle_lasi = ixgbe_handle_lasi_ext_t_x550em; 2523 1.7.2.2 jdolecek phy->ops.reset = ixgbe_reset_phy_t_X550em; 2524 1.7.2.2 jdolecek break; 2525 1.7.2.2 jdolecek case ixgbe_phy_sgmii: 2526 1.7.2.2 jdolecek phy->ops.setup_link = NULL; 2527 1.7.2.2 jdolecek break; 2528 1.7.2.2 jdolecek case ixgbe_phy_fw: 2529 1.7.2.2 jdolecek phy->ops.setup_link = ixgbe_setup_fw_link; 2530 1.7.2.2 jdolecek phy->ops.reset = ixgbe_reset_phy_fw; 2531 1.7.2.2 jdolecek break; 2532 1.7.2.2 jdolecek default: 2533 1.7.2.2 jdolecek break; 2534 1.7.2.2 jdolecek } 2535 1.7.2.2 jdolecek return ret_val; 2536 1.7.2.2 jdolecek } 2537 1.7.2.2 jdolecek 2538 1.7.2.2 jdolecek /** 2539 1.7.2.2 jdolecek * ixgbe_set_mdio_speed - Set MDIO clock speed 2540 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2541 1.7.2.2 jdolecek */ 2542 1.7.2.2 jdolecek static void ixgbe_set_mdio_speed(struct ixgbe_hw *hw) 2543 1.7.2.2 jdolecek { 2544 1.7.2.2 jdolecek u32 hlreg0; 2545 1.7.2.2 jdolecek 2546 1.7.2.2 jdolecek switch (hw->device_id) { 2547 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_10G_T: 2548 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_SGMII: 2549 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_SGMII_L: 2550 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_10G_T: 2551 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_SFP: 2552 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_QSFP: 2553 1.7.2.2 jdolecek /* Config MDIO clock speed before the first MDIO PHY access */ 2554 1.7.2.2 jdolecek hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); 2555 1.7.2.2 jdolecek hlreg0 &= ~IXGBE_HLREG0_MDCSPD; 2556 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); 2557 1.7.2.2 jdolecek break; 2558 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_1G_T: 2559 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_1G_T_L: 2560 1.7.2.2 jdolecek /* Select fast MDIO clock speed for these devices */ 2561 1.7.2.2 jdolecek hlreg0 = IXGBE_READ_REG(hw, IXGBE_HLREG0); 2562 1.7.2.2 jdolecek hlreg0 |= IXGBE_HLREG0_MDCSPD; 2563 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg0); 2564 1.7.2.2 jdolecek break; 2565 1.7.2.2 jdolecek default: 2566 1.7.2.2 jdolecek break; 2567 1.7.2.2 jdolecek } 2568 1.7.2.2 jdolecek } 2569 1.7.2.2 jdolecek 2570 1.7.2.2 jdolecek /** 2571 1.7.2.2 jdolecek * ixgbe_reset_hw_X550em - Perform hardware reset 2572 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2573 1.7.2.2 jdolecek * 2574 1.7.2.2 jdolecek * Resets the hardware by resetting the transmit and receive units, masks 2575 1.7.2.2 jdolecek * and clears all interrupts, perform a PHY reset, and perform a link (MAC) 2576 1.7.2.2 jdolecek * reset. 2577 1.7.2.2 jdolecek */ 2578 1.7.2.2 jdolecek s32 ixgbe_reset_hw_X550em(struct ixgbe_hw *hw) 2579 1.7.2.2 jdolecek { 2580 1.7.2.2 jdolecek ixgbe_link_speed link_speed; 2581 1.7.2.2 jdolecek s32 status; 2582 1.7.2.2 jdolecek u32 ctrl = 0; 2583 1.7.2.2 jdolecek u32 i; 2584 1.7.2.2 jdolecek bool link_up = FALSE; 2585 1.7.2.2 jdolecek u32 swfw_mask = hw->phy.phy_semaphore_mask; 2586 1.7.2.2 jdolecek 2587 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_reset_hw_X550em"); 2588 1.7.2.2 jdolecek 2589 1.7.2.2 jdolecek /* Call adapter stop to disable Tx/Rx and clear interrupts */ 2590 1.7.2.2 jdolecek status = hw->mac.ops.stop_adapter(hw); 2591 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) { 2592 1.7.2.2 jdolecek DEBUGOUT1("Failed to stop adapter, STATUS = %d\n", status); 2593 1.7.2.2 jdolecek return status; 2594 1.7.2.2 jdolecek } 2595 1.7.2.2 jdolecek /* flush pending Tx transactions */ 2596 1.7.2.2 jdolecek ixgbe_clear_tx_pending(hw); 2597 1.7.2.2 jdolecek 2598 1.7.2.2 jdolecek ixgbe_set_mdio_speed(hw); 2599 1.7.2.2 jdolecek 2600 1.7.2.2 jdolecek /* PHY ops must be identified and initialized prior to reset */ 2601 1.7.2.2 jdolecek status = hw->phy.ops.init(hw); 2602 1.7.2.2 jdolecek 2603 1.7.2.2 jdolecek if (status) 2604 1.7.2.2 jdolecek DEBUGOUT1("Failed to initialize PHY ops, STATUS = %d\n", 2605 1.7.2.2 jdolecek status); 2606 1.7.2.2 jdolecek 2607 1.7.2.2 jdolecek if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) { 2608 1.7.2.2 jdolecek DEBUGOUT("Returning from reset HW due to PHY init failure\n"); 2609 1.7.2.2 jdolecek return status; 2610 1.7.2.2 jdolecek } 2611 1.7.2.2 jdolecek 2612 1.7.2.2 jdolecek /* start the external PHY */ 2613 1.7.2.2 jdolecek if (hw->phy.type == ixgbe_phy_x550em_ext_t) { 2614 1.7.2.2 jdolecek status = ixgbe_init_ext_t_x550em(hw); 2615 1.7.2.2 jdolecek if (status) { 2616 1.7.2.2 jdolecek DEBUGOUT1("Failed to start the external PHY, STATUS = %d\n", 2617 1.7.2.2 jdolecek status); 2618 1.7.2.2 jdolecek return status; 2619 1.7.2.2 jdolecek } 2620 1.7.2.2 jdolecek } 2621 1.7.2.2 jdolecek 2622 1.7.2.2 jdolecek /* Setup SFP module if there is one present. */ 2623 1.7.2.2 jdolecek if (hw->phy.sfp_setup_needed) { 2624 1.7.2.2 jdolecek status = hw->mac.ops.setup_sfp(hw); 2625 1.7.2.2 jdolecek hw->phy.sfp_setup_needed = FALSE; 2626 1.7.2.2 jdolecek } 2627 1.7.2.2 jdolecek 2628 1.7.2.2 jdolecek if (status == IXGBE_ERR_SFP_NOT_SUPPORTED) 2629 1.7.2.2 jdolecek return status; 2630 1.7.2.2 jdolecek 2631 1.7.2.2 jdolecek /* Reset PHY */ 2632 1.7.2.2 jdolecek if (!hw->phy.reset_disable && hw->phy.ops.reset) { 2633 1.7.2.2 jdolecek if (hw->phy.ops.reset(hw) == IXGBE_ERR_OVERTEMP) 2634 1.7.2.2 jdolecek return IXGBE_ERR_OVERTEMP; 2635 1.7.2.2 jdolecek } 2636 1.7.2.2 jdolecek 2637 1.7.2.2 jdolecek mac_reset_top: 2638 1.7.2.2 jdolecek /* Issue global reset to the MAC. Needs to be SW reset if link is up. 2639 1.7.2.2 jdolecek * If link reset is used when link is up, it might reset the PHY when 2640 1.7.2.2 jdolecek * mng is using it. If link is down or the flag to force full link 2641 1.7.2.2 jdolecek * reset is set, then perform link reset. 2642 1.7.2.2 jdolecek */ 2643 1.7.2.2 jdolecek ctrl = IXGBE_CTRL_LNK_RST; 2644 1.7.2.2 jdolecek if (!hw->force_full_reset) { 2645 1.7.2.2 jdolecek hw->mac.ops.check_link(hw, &link_speed, &link_up, FALSE); 2646 1.7.2.2 jdolecek if (link_up) 2647 1.7.2.2 jdolecek ctrl = IXGBE_CTRL_RST; 2648 1.7.2.2 jdolecek } 2649 1.7.2.2 jdolecek 2650 1.7.2.2 jdolecek status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); 2651 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) { 2652 1.7.2.2 jdolecek ERROR_REPORT2(IXGBE_ERROR_CAUTION, 2653 1.7.2.2 jdolecek "semaphore failed with %d", status); 2654 1.7.2.2 jdolecek return IXGBE_ERR_SWFW_SYNC; 2655 1.7.2.2 jdolecek } 2656 1.7.2.2 jdolecek ctrl |= IXGBE_READ_REG(hw, IXGBE_CTRL); 2657 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_CTRL, ctrl); 2658 1.7.2.2 jdolecek IXGBE_WRITE_FLUSH(hw); 2659 1.7.2.2 jdolecek hw->mac.ops.release_swfw_sync(hw, swfw_mask); 2660 1.7.2.2 jdolecek 2661 1.7.2.2 jdolecek /* Poll for reset bit to self-clear meaning reset is complete */ 2662 1.7.2.2 jdolecek for (i = 0; i < 10; i++) { 2663 1.7.2.2 jdolecek usec_delay(1); 2664 1.7.2.2 jdolecek ctrl = IXGBE_READ_REG(hw, IXGBE_CTRL); 2665 1.7.2.2 jdolecek if (!(ctrl & IXGBE_CTRL_RST_MASK)) 2666 1.7.2.2 jdolecek break; 2667 1.7.2.2 jdolecek } 2668 1.7.2.2 jdolecek 2669 1.7.2.2 jdolecek if (ctrl & IXGBE_CTRL_RST_MASK) { 2670 1.7.2.2 jdolecek status = IXGBE_ERR_RESET_FAILED; 2671 1.7.2.2 jdolecek DEBUGOUT("Reset polling failed to complete.\n"); 2672 1.7.2.2 jdolecek } 2673 1.7.2.2 jdolecek 2674 1.7.2.2 jdolecek msec_delay(50); 2675 1.7.2.2 jdolecek 2676 1.7.2.2 jdolecek /* Double resets are required for recovery from certain error 2677 1.7.2.2 jdolecek * conditions. Between resets, it is necessary to stall to 2678 1.7.2.2 jdolecek * allow time for any pending HW events to complete. 2679 1.7.2.2 jdolecek */ 2680 1.7.2.2 jdolecek if (hw->mac.flags & IXGBE_FLAGS_DOUBLE_RESET_REQUIRED) { 2681 1.7.2.2 jdolecek hw->mac.flags &= ~IXGBE_FLAGS_DOUBLE_RESET_REQUIRED; 2682 1.7.2.2 jdolecek goto mac_reset_top; 2683 1.7.2.2 jdolecek } 2684 1.7.2.2 jdolecek 2685 1.7.2.2 jdolecek /* Store the permanent mac address */ 2686 1.7.2.2 jdolecek hw->mac.ops.get_mac_addr(hw, hw->mac.perm_addr); 2687 1.7.2.2 jdolecek 2688 1.7.2.2 jdolecek /* Store MAC address from RAR0, clear receive address registers, and 2689 1.7.2.2 jdolecek * clear the multicast table. Also reset num_rar_entries to 128, 2690 1.7.2.2 jdolecek * since we modify this value when programming the SAN MAC address. 2691 1.7.2.2 jdolecek */ 2692 1.7.2.2 jdolecek hw->mac.num_rar_entries = 128; 2693 1.7.2.2 jdolecek hw->mac.ops.init_rx_addrs(hw); 2694 1.7.2.2 jdolecek 2695 1.7.2.2 jdolecek ixgbe_set_mdio_speed(hw); 2696 1.7.2.2 jdolecek 2697 1.7.2.2 jdolecek if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP) 2698 1.7.2.2 jdolecek ixgbe_setup_mux_ctl(hw); 2699 1.7.2.2 jdolecek 2700 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2701 1.7.2.2 jdolecek DEBUGOUT1("Reset HW failed, STATUS = %d\n", status); 2702 1.7.2.2 jdolecek 2703 1.7.2.2 jdolecek return status; 2704 1.7.2.2 jdolecek } 2705 1.7.2.2 jdolecek 2706 1.7.2.2 jdolecek /** 2707 1.7.2.2 jdolecek * ixgbe_init_ext_t_x550em - Start (unstall) the external Base T PHY. 2708 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2709 1.7.2.2 jdolecek */ 2710 1.7.2.2 jdolecek s32 ixgbe_init_ext_t_x550em(struct ixgbe_hw *hw) 2711 1.7.2.2 jdolecek { 2712 1.7.2.2 jdolecek u32 status; 2713 1.7.2.2 jdolecek u16 reg; 2714 1.7.2.2 jdolecek 2715 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, 2716 1.7.2.2 jdolecek IXGBE_MDIO_TX_VENDOR_ALARMS_3, 2717 1.7.2.2 jdolecek IXGBE_MDIO_PMA_PMD_DEV_TYPE, 2718 1.7.2.2 jdolecek ®); 2719 1.7.2.2 jdolecek 2720 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2721 1.7.2.2 jdolecek return status; 2722 1.7.2.2 jdolecek 2723 1.7.2.2 jdolecek /* If PHY FW reset completed bit is set then this is the first 2724 1.7.2.2 jdolecek * SW instance after a power on so the PHY FW must be un-stalled. 2725 1.7.2.2 jdolecek */ 2726 1.7.2.2 jdolecek if (reg & IXGBE_MDIO_TX_VENDOR_ALARMS_3_RST_MASK) { 2727 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, 2728 1.7.2.2 jdolecek IXGBE_MDIO_GLOBAL_RES_PR_10, 2729 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2730 1.7.2.2 jdolecek ®); 2731 1.7.2.2 jdolecek 2732 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2733 1.7.2.2 jdolecek return status; 2734 1.7.2.2 jdolecek 2735 1.7.2.2 jdolecek reg &= ~IXGBE_MDIO_POWER_UP_STALL; 2736 1.7.2.2 jdolecek 2737 1.7.2.2 jdolecek status = hw->phy.ops.write_reg(hw, 2738 1.7.2.2 jdolecek IXGBE_MDIO_GLOBAL_RES_PR_10, 2739 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, 2740 1.7.2.2 jdolecek reg); 2741 1.7.2.2 jdolecek 2742 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2743 1.7.2.2 jdolecek return status; 2744 1.7.2.2 jdolecek } 2745 1.7.2.2 jdolecek 2746 1.7.2.2 jdolecek return status; 2747 1.7.2.2 jdolecek } 2748 1.7.2.2 jdolecek 2749 1.7.2.2 jdolecek /** 2750 1.7.2.2 jdolecek * ixgbe_setup_kr_x550em - Configure the KR PHY. 2751 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2752 1.7.2.2 jdolecek **/ 2753 1.7.2.2 jdolecek s32 ixgbe_setup_kr_x550em(struct ixgbe_hw *hw) 2754 1.7.2.2 jdolecek { 2755 1.7.2.2 jdolecek /* leave link alone for 2.5G */ 2756 1.7.2.2 jdolecek if (hw->phy.autoneg_advertised & IXGBE_LINK_SPEED_2_5GB_FULL) 2757 1.7.2.2 jdolecek return IXGBE_SUCCESS; 2758 1.7.2.2 jdolecek 2759 1.7.2.2 jdolecek if (ixgbe_check_reset_blocked(hw)) 2760 1.7.2.2 jdolecek return 0; 2761 1.7.2.2 jdolecek 2762 1.7.2.2 jdolecek return ixgbe_setup_kr_speed_x550em(hw, hw->phy.autoneg_advertised); 2763 1.7.2.2 jdolecek } 2764 1.7.2.2 jdolecek 2765 1.7.2.2 jdolecek /** 2766 1.7.2.2 jdolecek * ixgbe_setup_mac_link_sfp_x550em - Setup internal/external the PHY for SFP 2767 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2768 1.7.2.2 jdolecek * 2769 1.7.2.2 jdolecek * Configure the external PHY and the integrated KR PHY for SFP support. 2770 1.7.2.2 jdolecek **/ 2771 1.7.2.2 jdolecek s32 ixgbe_setup_mac_link_sfp_x550em(struct ixgbe_hw *hw, 2772 1.7.2.2 jdolecek ixgbe_link_speed speed, 2773 1.7.2.2 jdolecek bool autoneg_wait_to_complete) 2774 1.7.2.2 jdolecek { 2775 1.7.2.2 jdolecek s32 ret_val; 2776 1.7.2.2 jdolecek u16 reg_slice, reg_val; 2777 1.7.2.2 jdolecek bool setup_linear = FALSE; 2778 1.7.2.2 jdolecek UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); 2779 1.7.2.2 jdolecek 2780 1.7.2.2 jdolecek /* Check if SFP module is supported and linear */ 2781 1.7.2.2 jdolecek ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); 2782 1.7.2.2 jdolecek 2783 1.7.2.2 jdolecek /* If no SFP module present, then return success. Return success since 2784 1.7.2.2 jdolecek * there is no reason to configure CS4227 and SFP not present error is 2785 1.7.2.2 jdolecek * not excepted in the setup MAC link flow. 2786 1.7.2.2 jdolecek */ 2787 1.7.2.2 jdolecek if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT) 2788 1.7.2.2 jdolecek return IXGBE_SUCCESS; 2789 1.7.2.2 jdolecek 2790 1.7.2.2 jdolecek if (ret_val != IXGBE_SUCCESS) 2791 1.7.2.2 jdolecek return ret_val; 2792 1.7.2.2 jdolecek 2793 1.7.2.2 jdolecek /* Configure internal PHY for KR/KX. */ 2794 1.7.2.2 jdolecek ixgbe_setup_kr_speed_x550em(hw, speed); 2795 1.7.2.2 jdolecek 2796 1.7.2.2 jdolecek /* Configure CS4227 LINE side to proper mode. */ 2797 1.7.2.2 jdolecek reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + 2798 1.7.2.2 jdolecek (hw->bus.lan_id << 12); 2799 1.7.2.2 jdolecek if (setup_linear) 2800 1.7.2.2 jdolecek reg_val = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; 2801 1.7.2.2 jdolecek else 2802 1.7.2.2 jdolecek reg_val = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; 2803 1.7.2.2 jdolecek ret_val = hw->link.ops.write_link(hw, hw->link.addr, reg_slice, 2804 1.7.2.2 jdolecek reg_val); 2805 1.7.2.2 jdolecek return ret_val; 2806 1.7.2.2 jdolecek } 2807 1.7.2.2 jdolecek 2808 1.7.2.2 jdolecek /** 2809 1.7.2.2 jdolecek * ixgbe_setup_sfi_x550a - Configure the internal PHY for native SFI mode 2810 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2811 1.7.2.2 jdolecek * @speed: the link speed to force 2812 1.7.2.2 jdolecek * 2813 1.7.2.2 jdolecek * Configures the integrated PHY for native SFI mode. Used to connect the 2814 1.7.2.2 jdolecek * internal PHY directly to an SFP cage, without autonegotiation. 2815 1.7.2.2 jdolecek **/ 2816 1.7.2.2 jdolecek static s32 ixgbe_setup_sfi_x550a(struct ixgbe_hw *hw, ixgbe_link_speed *speed) 2817 1.7.2.2 jdolecek { 2818 1.7.2.2 jdolecek struct ixgbe_mac_info *mac = &hw->mac; 2819 1.7.2.2 jdolecek s32 status; 2820 1.7.2.2 jdolecek u32 reg_val; 2821 1.7.2.2 jdolecek 2822 1.7.2.2 jdolecek /* Disable all AN and force speed to 10G Serial. */ 2823 1.7.2.2 jdolecek status = mac->ops.read_iosf_sb_reg(hw, 2824 1.7.2.2 jdolecek IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 2825 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 2826 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2827 1.7.2.2 jdolecek return status; 2828 1.7.2.2 jdolecek 2829 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN_EN; 2830 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_AN37_EN; 2831 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SGMII_EN; 2832 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_MASK; 2833 1.7.2.2 jdolecek 2834 1.7.2.2 jdolecek /* Select forced link speed for internal PHY. */ 2835 1.7.2.2 jdolecek switch (*speed) { 2836 1.7.2.2 jdolecek case IXGBE_LINK_SPEED_10GB_FULL: 2837 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_10G; 2838 1.7.2.2 jdolecek break; 2839 1.7.2.2 jdolecek case IXGBE_LINK_SPEED_1GB_FULL: 2840 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_PMD_FLX_MASK_ST20_SPEED_1G; 2841 1.7.2.2 jdolecek break; 2842 1.7.2.2 jdolecek default: 2843 1.7.2.2 jdolecek /* Other link speeds are not supported by internal PHY. */ 2844 1.7.2.2 jdolecek return IXGBE_ERR_LINK_SETUP; 2845 1.7.2.2 jdolecek } 2846 1.7.2.2 jdolecek 2847 1.7.2.2 jdolecek status = mac->ops.write_iosf_sb_reg(hw, 2848 1.7.2.2 jdolecek IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 2849 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 2850 1.7.2.2 jdolecek 2851 1.7.2.2 jdolecek /* Toggle port SW reset by AN reset. */ 2852 1.7.2.2 jdolecek status = ixgbe_restart_an_internal_phy_x550em(hw); 2853 1.7.2.2 jdolecek 2854 1.7.2.2 jdolecek return status; 2855 1.7.2.2 jdolecek } 2856 1.7.2.2 jdolecek 2857 1.7.2.2 jdolecek /** 2858 1.7.2.2 jdolecek * ixgbe_setup_mac_link_sfp_x550a - Setup internal PHY for SFP 2859 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2860 1.7.2.2 jdolecek * 2861 1.7.2.2 jdolecek * Configure the the integrated PHY for SFP support. 2862 1.7.2.2 jdolecek **/ 2863 1.7.2.2 jdolecek s32 ixgbe_setup_mac_link_sfp_x550a(struct ixgbe_hw *hw, 2864 1.7.2.2 jdolecek ixgbe_link_speed speed, 2865 1.7.2.2 jdolecek bool autoneg_wait_to_complete) 2866 1.7.2.2 jdolecek { 2867 1.7.2.2 jdolecek s32 ret_val; 2868 1.7.2.2 jdolecek u16 reg_phy_ext; 2869 1.7.2.2 jdolecek bool setup_linear = FALSE; 2870 1.7.2.2 jdolecek u32 reg_slice, reg_phy_int, slice_offset; 2871 1.7.2.2 jdolecek 2872 1.7.2.2 jdolecek UNREFERENCED_1PARAMETER(autoneg_wait_to_complete); 2873 1.7.2.2 jdolecek 2874 1.7.2.2 jdolecek /* Check if SFP module is supported and linear */ 2875 1.7.2.2 jdolecek ret_val = ixgbe_supported_sfp_modules_X550em(hw, &setup_linear); 2876 1.7.2.2 jdolecek 2877 1.7.2.2 jdolecek /* If no SFP module present, then return success. Return success since 2878 1.7.2.2 jdolecek * SFP not present error is not excepted in the setup MAC link flow. 2879 1.7.2.2 jdolecek */ 2880 1.7.2.2 jdolecek if (ret_val == IXGBE_ERR_SFP_NOT_PRESENT) 2881 1.7.2.2 jdolecek return IXGBE_SUCCESS; 2882 1.7.2.2 jdolecek 2883 1.7.2.2 jdolecek if (ret_val != IXGBE_SUCCESS) 2884 1.7.2.2 jdolecek return ret_val; 2885 1.7.2.2 jdolecek 2886 1.7.2.2 jdolecek if (hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP_N) { 2887 1.7.2.2 jdolecek /* Configure internal PHY for native SFI based on module type */ 2888 1.7.2.2 jdolecek ret_val = hw->mac.ops.read_iosf_sb_reg(hw, 2889 1.7.2.2 jdolecek IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 2890 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_phy_int); 2891 1.7.2.2 jdolecek 2892 1.7.2.2 jdolecek if (ret_val != IXGBE_SUCCESS) 2893 1.7.2.2 jdolecek return ret_val; 2894 1.7.2.2 jdolecek 2895 1.7.2.2 jdolecek reg_phy_int &= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_DA; 2896 1.7.2.2 jdolecek if (!setup_linear) 2897 1.7.2.2 jdolecek reg_phy_int |= IXGBE_KRM_PMD_FLX_MASK_ST20_SFI_10G_SR; 2898 1.7.2.2 jdolecek 2899 1.7.2.2 jdolecek ret_val = hw->mac.ops.write_iosf_sb_reg(hw, 2900 1.7.2.2 jdolecek IXGBE_KRM_PMD_FLX_MASK_ST20(hw->bus.lan_id), 2901 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_phy_int); 2902 1.7.2.2 jdolecek 2903 1.7.2.2 jdolecek if (ret_val != IXGBE_SUCCESS) 2904 1.7.2.2 jdolecek return ret_val; 2905 1.7.2.2 jdolecek 2906 1.7.2.2 jdolecek /* Setup SFI internal link. */ 2907 1.7.2.2 jdolecek ret_val = ixgbe_setup_sfi_x550a(hw, &speed); 2908 1.7.2.2 jdolecek } else { 2909 1.7.2.2 jdolecek /* Configure internal PHY for KR/KX. */ 2910 1.7.2.2 jdolecek ixgbe_setup_kr_speed_x550em(hw, speed); 2911 1.7.2.2 jdolecek 2912 1.7.2.2 jdolecek if (hw->phy.addr == 0x0 || hw->phy.addr == 0xFFFF) { 2913 1.7.2.2 jdolecek /* Find Address */ 2914 1.7.2.2 jdolecek DEBUGOUT("Invalid NW_MNG_IF_SEL.MDIO_PHY_ADD value\n"); 2915 1.7.2.2 jdolecek return IXGBE_ERR_PHY_ADDR_INVALID; 2916 1.7.2.2 jdolecek } 2917 1.7.2.2 jdolecek 2918 1.7.2.2 jdolecek /* Get external PHY SKU id */ 2919 1.7.2.2 jdolecek ret_val = hw->phy.ops.read_reg(hw, IXGBE_CS4227_EFUSE_PDF_SKU, 2920 1.7.2.2 jdolecek IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); 2921 1.7.2.2 jdolecek 2922 1.7.2.2 jdolecek if (ret_val != IXGBE_SUCCESS) 2923 1.7.2.2 jdolecek return ret_val; 2924 1.7.2.2 jdolecek 2925 1.7.2.2 jdolecek /* When configuring quad port CS4223, the MAC instance is part 2926 1.7.2.2 jdolecek * of the slice offset. 2927 1.7.2.2 jdolecek */ 2928 1.7.2.2 jdolecek if (reg_phy_ext == IXGBE_CS4223_SKU_ID) 2929 1.7.2.2 jdolecek slice_offset = (hw->bus.lan_id + 2930 1.7.2.2 jdolecek (hw->bus.instance_id << 1)) << 12; 2931 1.7.2.2 jdolecek else 2932 1.7.2.2 jdolecek slice_offset = hw->bus.lan_id << 12; 2933 1.7.2.2 jdolecek 2934 1.7.2.2 jdolecek /* Configure CS4227/CS4223 LINE side to proper mode. */ 2935 1.7.2.2 jdolecek reg_slice = IXGBE_CS4227_LINE_SPARE24_LSB + slice_offset; 2936 1.7.2.2 jdolecek 2937 1.7.2.2 jdolecek ret_val = hw->phy.ops.read_reg(hw, reg_slice, 2938 1.7.2.2 jdolecek IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); 2939 1.7.2.2 jdolecek 2940 1.7.2.2 jdolecek if (ret_val != IXGBE_SUCCESS) 2941 1.7.2.2 jdolecek return ret_val; 2942 1.7.2.2 jdolecek 2943 1.7.2.2 jdolecek reg_phy_ext &= ~((IXGBE_CS4227_EDC_MODE_CX1 << 1) | 2944 1.7.2.2 jdolecek (IXGBE_CS4227_EDC_MODE_SR << 1)); 2945 1.7.2.2 jdolecek 2946 1.7.2.2 jdolecek if (setup_linear) 2947 1.7.2.2 jdolecek reg_phy_ext = (IXGBE_CS4227_EDC_MODE_CX1 << 1) | 0x1; 2948 1.7.2.2 jdolecek else 2949 1.7.2.2 jdolecek reg_phy_ext = (IXGBE_CS4227_EDC_MODE_SR << 1) | 0x1; 2950 1.7.2.2 jdolecek ret_val = hw->phy.ops.write_reg(hw, reg_slice, 2951 1.7.2.2 jdolecek IXGBE_MDIO_ZERO_DEV_TYPE, reg_phy_ext); 2952 1.7.2.2 jdolecek 2953 1.7.2.2 jdolecek /* Flush previous write with a read */ 2954 1.7.2.2 jdolecek ret_val = hw->phy.ops.read_reg(hw, reg_slice, 2955 1.7.2.2 jdolecek IXGBE_MDIO_ZERO_DEV_TYPE, ®_phy_ext); 2956 1.7.2.2 jdolecek } 2957 1.7.2.2 jdolecek return ret_val; 2958 1.7.2.2 jdolecek } 2959 1.7.2.2 jdolecek 2960 1.7.2.2 jdolecek /** 2961 1.7.2.2 jdolecek * ixgbe_setup_ixfi_x550em_x - MAC specific iXFI configuration 2962 1.7.2.2 jdolecek * @hw: pointer to hardware structure 2963 1.7.2.2 jdolecek * 2964 1.7.2.2 jdolecek * iXfI configuration needed for ixgbe_mac_X550EM_x devices. 2965 1.7.2.2 jdolecek **/ 2966 1.7.2.2 jdolecek static s32 ixgbe_setup_ixfi_x550em_x(struct ixgbe_hw *hw) 2967 1.7.2.2 jdolecek { 2968 1.7.2.2 jdolecek struct ixgbe_mac_info *mac = &hw->mac; 2969 1.7.2.2 jdolecek s32 status; 2970 1.7.2.2 jdolecek u32 reg_val; 2971 1.7.2.2 jdolecek 2972 1.7.2.2 jdolecek /* Disable training protocol FSM. */ 2973 1.7.2.2 jdolecek status = mac->ops.read_iosf_sb_reg(hw, 2974 1.7.2.2 jdolecek IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), 2975 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 2976 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2977 1.7.2.2 jdolecek return status; 2978 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_CONV_WO_PROTOCOL; 2979 1.7.2.2 jdolecek status = mac->ops.write_iosf_sb_reg(hw, 2980 1.7.2.2 jdolecek IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), 2981 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 2982 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2983 1.7.2.2 jdolecek return status; 2984 1.7.2.2 jdolecek 2985 1.7.2.2 jdolecek /* Disable Flex from training TXFFE. */ 2986 1.7.2.2 jdolecek status = mac->ops.read_iosf_sb_reg(hw, 2987 1.7.2.2 jdolecek IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), 2988 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 2989 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2990 1.7.2.2 jdolecek return status; 2991 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; 2992 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; 2993 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; 2994 1.7.2.2 jdolecek status = mac->ops.write_iosf_sb_reg(hw, 2995 1.7.2.2 jdolecek IXGBE_KRM_DSP_TXFFE_STATE_4(hw->bus.lan_id), 2996 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 2997 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 2998 1.7.2.2 jdolecek return status; 2999 1.7.2.2 jdolecek status = mac->ops.read_iosf_sb_reg(hw, 3000 1.7.2.2 jdolecek IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), 3001 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 3002 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3003 1.7.2.2 jdolecek return status; 3004 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_C0_EN; 3005 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CP1_CN1_EN; 3006 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_DSP_TXFFE_STATE_CO_ADAPT_EN; 3007 1.7.2.2 jdolecek status = mac->ops.write_iosf_sb_reg(hw, 3008 1.7.2.2 jdolecek IXGBE_KRM_DSP_TXFFE_STATE_5(hw->bus.lan_id), 3009 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 3010 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3011 1.7.2.2 jdolecek return status; 3012 1.7.2.2 jdolecek 3013 1.7.2.2 jdolecek /* Enable override for coefficients. */ 3014 1.7.2.2 jdolecek status = mac->ops.read_iosf_sb_reg(hw, 3015 1.7.2.2 jdolecek IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), 3016 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 3017 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3018 1.7.2.2 jdolecek return status; 3019 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_OVRRD_EN; 3020 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CZERO_EN; 3021 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CPLUS1_OVRRD_EN; 3022 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_TX_COEFF_CTRL_1_CMINUS1_OVRRD_EN; 3023 1.7.2.2 jdolecek status = mac->ops.write_iosf_sb_reg(hw, 3024 1.7.2.2 jdolecek IXGBE_KRM_TX_COEFF_CTRL_1(hw->bus.lan_id), 3025 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 3026 1.7.2.2 jdolecek return status; 3027 1.7.2.2 jdolecek } 3028 1.7.2.2 jdolecek 3029 1.7.2.2 jdolecek /** 3030 1.7.2.2 jdolecek * ixgbe_setup_ixfi_x550em - Configure the KR PHY for iXFI mode. 3031 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3032 1.7.2.2 jdolecek * @speed: the link speed to force 3033 1.7.2.2 jdolecek * 3034 1.7.2.2 jdolecek * Configures the integrated KR PHY to use iXFI mode. Used to connect an 3035 1.7.2.2 jdolecek * internal and external PHY at a specific speed, without autonegotiation. 3036 1.7.2.2 jdolecek **/ 3037 1.7.2.2 jdolecek static s32 ixgbe_setup_ixfi_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed) 3038 1.7.2.2 jdolecek { 3039 1.7.2.2 jdolecek struct ixgbe_mac_info *mac = &hw->mac; 3040 1.7.2.2 jdolecek s32 status; 3041 1.7.2.2 jdolecek u32 reg_val; 3042 1.7.2.2 jdolecek 3043 1.7.2.2 jdolecek /* iXFI is only supported with X552 */ 3044 1.7.2.2 jdolecek if (mac->type != ixgbe_mac_X550EM_x) 3045 1.7.2.2 jdolecek return IXGBE_ERR_LINK_SETUP; 3046 1.7.2.2 jdolecek 3047 1.7.2.2 jdolecek /* Disable AN and force speed to 10G Serial. */ 3048 1.7.2.2 jdolecek status = mac->ops.read_iosf_sb_reg(hw, 3049 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 3050 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 3051 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3052 1.7.2.2 jdolecek return status; 3053 1.7.2.2 jdolecek 3054 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; 3055 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; 3056 1.7.2.2 jdolecek 3057 1.7.2.2 jdolecek /* Select forced link speed for internal PHY. */ 3058 1.7.2.2 jdolecek switch (*speed) { 3059 1.7.2.2 jdolecek case IXGBE_LINK_SPEED_10GB_FULL: 3060 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; 3061 1.7.2.2 jdolecek break; 3062 1.7.2.2 jdolecek case IXGBE_LINK_SPEED_1GB_FULL: 3063 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_1G; 3064 1.7.2.2 jdolecek break; 3065 1.7.2.2 jdolecek default: 3066 1.7.2.2 jdolecek /* Other link speeds are not supported by internal KR PHY. */ 3067 1.7.2.2 jdolecek return IXGBE_ERR_LINK_SETUP; 3068 1.7.2.2 jdolecek } 3069 1.7.2.2 jdolecek 3070 1.7.2.2 jdolecek status = mac->ops.write_iosf_sb_reg(hw, 3071 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 3072 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 3073 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3074 1.7.2.2 jdolecek return status; 3075 1.7.2.2 jdolecek 3076 1.7.2.2 jdolecek /* Additional configuration needed for x550em_x */ 3077 1.7.2.2 jdolecek if (hw->mac.type == ixgbe_mac_X550EM_x) { 3078 1.7.2.2 jdolecek status = ixgbe_setup_ixfi_x550em_x(hw); 3079 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3080 1.7.2.2 jdolecek return status; 3081 1.7.2.2 jdolecek } 3082 1.7.2.2 jdolecek 3083 1.7.2.2 jdolecek /* Toggle port SW reset by AN reset. */ 3084 1.7.2.2 jdolecek status = ixgbe_restart_an_internal_phy_x550em(hw); 3085 1.7.2.2 jdolecek 3086 1.7.2.2 jdolecek return status; 3087 1.7.2.2 jdolecek } 3088 1.7.2.2 jdolecek 3089 1.7.2.2 jdolecek /** 3090 1.7.2.2 jdolecek * ixgbe_ext_phy_t_x550em_get_link - Get ext phy link status 3091 1.7.2.2 jdolecek * @hw: address of hardware structure 3092 1.7.2.2 jdolecek * @link_up: address of boolean to indicate link status 3093 1.7.2.2 jdolecek * 3094 1.7.2.2 jdolecek * Returns error code if unable to get link status. 3095 1.7.2.2 jdolecek */ 3096 1.7.2.2 jdolecek static s32 ixgbe_ext_phy_t_x550em_get_link(struct ixgbe_hw *hw, bool *link_up) 3097 1.7.2.2 jdolecek { 3098 1.7.2.2 jdolecek u32 ret; 3099 1.7.2.2 jdolecek u16 autoneg_status; 3100 1.7.2.2 jdolecek 3101 1.7.2.2 jdolecek *link_up = FALSE; 3102 1.7.2.2 jdolecek 3103 1.7.2.2 jdolecek /* read this twice back to back to indicate current status */ 3104 1.7.2.2 jdolecek ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, 3105 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 3106 1.7.2.2 jdolecek &autoneg_status); 3107 1.7.2.2 jdolecek if (ret != IXGBE_SUCCESS) 3108 1.7.2.2 jdolecek return ret; 3109 1.7.2.2 jdolecek 3110 1.7.2.2 jdolecek ret = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, 3111 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 3112 1.7.2.2 jdolecek &autoneg_status); 3113 1.7.2.2 jdolecek if (ret != IXGBE_SUCCESS) 3114 1.7.2.2 jdolecek return ret; 3115 1.7.2.2 jdolecek 3116 1.7.2.2 jdolecek *link_up = !!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS); 3117 1.7.2.2 jdolecek 3118 1.7.2.2 jdolecek return IXGBE_SUCCESS; 3119 1.7.2.2 jdolecek } 3120 1.7.2.2 jdolecek 3121 1.7.2.2 jdolecek /** 3122 1.7.2.2 jdolecek * ixgbe_setup_internal_phy_t_x550em - Configure KR PHY to X557 link 3123 1.7.2.2 jdolecek * @hw: point to hardware structure 3124 1.7.2.2 jdolecek * 3125 1.7.2.2 jdolecek * Configures the link between the integrated KR PHY and the external X557 PHY 3126 1.7.2.2 jdolecek * The driver will call this function when it gets a link status change 3127 1.7.2.2 jdolecek * interrupt from the X557 PHY. This function configures the link speed 3128 1.7.2.2 jdolecek * between the PHYs to match the link speed of the BASE-T link. 3129 1.7.2.2 jdolecek * 3130 1.7.2.2 jdolecek * A return of a non-zero value indicates an error, and the base driver should 3131 1.7.2.2 jdolecek * not report link up. 3132 1.7.2.2 jdolecek */ 3133 1.7.2.2 jdolecek s32 ixgbe_setup_internal_phy_t_x550em(struct ixgbe_hw *hw) 3134 1.7.2.2 jdolecek { 3135 1.7.2.2 jdolecek ixgbe_link_speed force_speed; 3136 1.7.2.2 jdolecek bool link_up; 3137 1.7.2.2 jdolecek u32 status; 3138 1.7.2.2 jdolecek u16 speed; 3139 1.7.2.2 jdolecek 3140 1.7.2.2 jdolecek if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) 3141 1.7.2.2 jdolecek return IXGBE_ERR_CONFIG; 3142 1.7.2.2 jdolecek 3143 1.7.2.2 jdolecek if (hw->mac.type == ixgbe_mac_X550EM_x && 3144 1.7.2.2 jdolecek !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { 3145 1.7.2.2 jdolecek /* If link is down, there is no setup necessary so return */ 3146 1.7.2.2 jdolecek status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); 3147 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3148 1.7.2.2 jdolecek return status; 3149 1.7.2.2 jdolecek 3150 1.7.2.2 jdolecek if (!link_up) 3151 1.7.2.2 jdolecek return IXGBE_SUCCESS; 3152 1.7.2.2 jdolecek 3153 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, 3154 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, 3155 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 3156 1.7.2.2 jdolecek &speed); 3157 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3158 1.7.2.2 jdolecek return status; 3159 1.7.2.2 jdolecek 3160 1.7.2.2 jdolecek /* If link is still down - no setup is required so return */ 3161 1.7.2.2 jdolecek status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); 3162 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3163 1.7.2.2 jdolecek return status; 3164 1.7.2.2 jdolecek if (!link_up) 3165 1.7.2.2 jdolecek return IXGBE_SUCCESS; 3166 1.7.2.2 jdolecek 3167 1.7.2.2 jdolecek /* clear everything but the speed and duplex bits */ 3168 1.7.2.2 jdolecek speed &= IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_MASK; 3169 1.7.2.2 jdolecek 3170 1.7.2.2 jdolecek switch (speed) { 3171 1.7.2.2 jdolecek case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB_FULL: 3172 1.7.2.2 jdolecek force_speed = IXGBE_LINK_SPEED_10GB_FULL; 3173 1.7.2.2 jdolecek break; 3174 1.7.2.2 jdolecek case IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB_FULL: 3175 1.7.2.2 jdolecek force_speed = IXGBE_LINK_SPEED_1GB_FULL; 3176 1.7.2.2 jdolecek break; 3177 1.7.2.2 jdolecek default: 3178 1.7.2.2 jdolecek /* Internal PHY does not support anything else */ 3179 1.7.2.2 jdolecek return IXGBE_ERR_INVALID_LINK_SETTINGS; 3180 1.7.2.2 jdolecek } 3181 1.7.2.2 jdolecek 3182 1.7.2.2 jdolecek return ixgbe_setup_ixfi_x550em(hw, &force_speed); 3183 1.7.2.2 jdolecek } else { 3184 1.7.2.2 jdolecek speed = IXGBE_LINK_SPEED_10GB_FULL | 3185 1.7.2.2 jdolecek IXGBE_LINK_SPEED_1GB_FULL; 3186 1.7.2.2 jdolecek return ixgbe_setup_kr_speed_x550em(hw, speed); 3187 1.7.2.2 jdolecek } 3188 1.7.2.2 jdolecek } 3189 1.7.2.2 jdolecek 3190 1.7.2.2 jdolecek /** 3191 1.7.2.2 jdolecek * ixgbe_setup_phy_loopback_x550em - Configure the KR PHY for loopback. 3192 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3193 1.7.2.2 jdolecek * 3194 1.7.2.2 jdolecek * Configures the integrated KR PHY to use internal loopback mode. 3195 1.7.2.2 jdolecek **/ 3196 1.7.2.2 jdolecek s32 ixgbe_setup_phy_loopback_x550em(struct ixgbe_hw *hw) 3197 1.7.2.2 jdolecek { 3198 1.7.2.2 jdolecek s32 status; 3199 1.7.2.2 jdolecek u32 reg_val; 3200 1.7.2.2 jdolecek 3201 1.7.2.2 jdolecek /* Disable AN and force speed to 10G Serial. */ 3202 1.7.2.2 jdolecek status = hw->mac.ops.read_iosf_sb_reg(hw, 3203 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 3204 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 3205 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3206 1.7.2.2 jdolecek return status; 3207 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_AN_ENABLE; 3208 1.7.2.2 jdolecek reg_val &= ~IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_MASK; 3209 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_LINK_CTRL_1_TETH_FORCE_SPEED_10G; 3210 1.7.2.2 jdolecek status = hw->mac.ops.write_iosf_sb_reg(hw, 3211 1.7.2.2 jdolecek IXGBE_KRM_LINK_CTRL_1(hw->bus.lan_id), 3212 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 3213 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3214 1.7.2.2 jdolecek return status; 3215 1.7.2.2 jdolecek 3216 1.7.2.2 jdolecek /* Set near-end loopback clocks. */ 3217 1.7.2.2 jdolecek status = hw->mac.ops.read_iosf_sb_reg(hw, 3218 1.7.2.2 jdolecek IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id), 3219 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 3220 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3221 1.7.2.2 jdolecek return status; 3222 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_32B; 3223 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_PORT_CAR_GEN_CTRL_NELB_KRPCS; 3224 1.7.2.2 jdolecek status = hw->mac.ops.write_iosf_sb_reg(hw, 3225 1.7.2.2 jdolecek IXGBE_KRM_PORT_CAR_GEN_CTRL(hw->bus.lan_id), 3226 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 3227 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3228 1.7.2.2 jdolecek return status; 3229 1.7.2.2 jdolecek 3230 1.7.2.2 jdolecek /* Set loopback enable. */ 3231 1.7.2.2 jdolecek status = hw->mac.ops.read_iosf_sb_reg(hw, 3232 1.7.2.2 jdolecek IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id), 3233 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 3234 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3235 1.7.2.2 jdolecek return status; 3236 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_PMD_DFX_BURNIN_TX_RX_KR_LB_MASK; 3237 1.7.2.2 jdolecek status = hw->mac.ops.write_iosf_sb_reg(hw, 3238 1.7.2.2 jdolecek IXGBE_KRM_PMD_DFX_BURNIN(hw->bus.lan_id), 3239 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 3240 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3241 1.7.2.2 jdolecek return status; 3242 1.7.2.2 jdolecek 3243 1.7.2.2 jdolecek /* Training bypass. */ 3244 1.7.2.2 jdolecek status = hw->mac.ops.read_iosf_sb_reg(hw, 3245 1.7.2.2 jdolecek IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), 3246 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 3247 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3248 1.7.2.2 jdolecek return status; 3249 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_RX_TRN_LINKUP_CTRL_PROTOCOL_BYPASS; 3250 1.7.2.2 jdolecek status = hw->mac.ops.write_iosf_sb_reg(hw, 3251 1.7.2.2 jdolecek IXGBE_KRM_RX_TRN_LINKUP_CTRL(hw->bus.lan_id), 3252 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 3253 1.7.2.2 jdolecek 3254 1.7.2.2 jdolecek return status; 3255 1.7.2.2 jdolecek } 3256 1.7.2.2 jdolecek 3257 1.7.2.2 jdolecek /** 3258 1.7.2.2 jdolecek * ixgbe_read_ee_hostif_X550 - Read EEPROM word using a host interface command 3259 1.7.2.2 jdolecek * assuming that the semaphore is already obtained. 3260 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3261 1.7.2.2 jdolecek * @offset: offset of word in the EEPROM to read 3262 1.7.2.2 jdolecek * @data: word read from the EEPROM 3263 1.7.2.2 jdolecek * 3264 1.7.2.2 jdolecek * Reads a 16 bit word from the EEPROM using the hostif. 3265 1.7.2.2 jdolecek **/ 3266 1.7.2.2 jdolecek s32 ixgbe_read_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, u16 *data) 3267 1.7.2.2 jdolecek { 3268 1.7.2.2 jdolecek const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM; 3269 1.7.2.2 jdolecek struct ixgbe_hic_read_shadow_ram buffer; 3270 1.7.2.2 jdolecek s32 status; 3271 1.7.2.2 jdolecek 3272 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_read_ee_hostif_X550"); 3273 1.7.2.2 jdolecek buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; 3274 1.7.2.2 jdolecek buffer.hdr.req.buf_lenh = 0; 3275 1.7.2.2 jdolecek buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; 3276 1.7.2.2 jdolecek buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; 3277 1.7.2.2 jdolecek 3278 1.7.2.2 jdolecek /* convert offset from words to bytes */ 3279 1.7.2.2 jdolecek buffer.address = IXGBE_CPU_TO_BE32(offset * 2); 3280 1.7.2.2 jdolecek /* one word */ 3281 1.7.2.2 jdolecek buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16)); 3282 1.7.2.2 jdolecek 3283 1.7.2.2 jdolecek status = hw->mac.ops.acquire_swfw_sync(hw, mask); 3284 1.7.2.2 jdolecek if (status) 3285 1.7.2.2 jdolecek return status; 3286 1.7.2.2 jdolecek 3287 1.7.2.2 jdolecek status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer), 3288 1.7.2.2 jdolecek IXGBE_HI_COMMAND_TIMEOUT); 3289 1.7.2.2 jdolecek if (!status) { 3290 1.7.2.2 jdolecek *data = (u16)IXGBE_READ_REG_ARRAY(hw, IXGBE_FLEX_MNG, 3291 1.7.2.2 jdolecek FW_NVM_DATA_OFFSET); 3292 1.7.2.2 jdolecek } 3293 1.7.2.2 jdolecek 3294 1.7.2.2 jdolecek hw->mac.ops.release_swfw_sync(hw, mask); 3295 1.7.2.2 jdolecek return status; 3296 1.7.2.2 jdolecek } 3297 1.7.2.2 jdolecek 3298 1.7.2.2 jdolecek /** 3299 1.7.2.2 jdolecek * ixgbe_read_ee_hostif_buffer_X550- Read EEPROM word(s) using hostif 3300 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3301 1.7.2.2 jdolecek * @offset: offset of word in the EEPROM to read 3302 1.7.2.2 jdolecek * @words: number of words 3303 1.7.2.2 jdolecek * @data: word(s) read from the EEPROM 3304 1.7.2.2 jdolecek * 3305 1.7.2.2 jdolecek * Reads a 16 bit word(s) from the EEPROM using the hostif. 3306 1.7.2.2 jdolecek **/ 3307 1.7.2.2 jdolecek s32 ixgbe_read_ee_hostif_buffer_X550(struct ixgbe_hw *hw, 3308 1.7.2.2 jdolecek u16 offset, u16 words, u16 *data) 3309 1.7.2.2 jdolecek { 3310 1.7.2.2 jdolecek const u32 mask = IXGBE_GSSR_SW_MNG_SM | IXGBE_GSSR_EEP_SM; 3311 1.7.2.2 jdolecek struct ixgbe_hic_read_shadow_ram buffer; 3312 1.7.2.2 jdolecek u32 current_word = 0; 3313 1.7.2.2 jdolecek u16 words_to_read; 3314 1.7.2.2 jdolecek s32 status; 3315 1.7.2.2 jdolecek u32 i; 3316 1.7.2.2 jdolecek 3317 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_read_ee_hostif_buffer_X550"); 3318 1.7.2.2 jdolecek 3319 1.7.2.2 jdolecek /* Take semaphore for the entire operation. */ 3320 1.7.2.2 jdolecek status = hw->mac.ops.acquire_swfw_sync(hw, mask); 3321 1.7.2.2 jdolecek if (status) { 3322 1.7.2.2 jdolecek DEBUGOUT("EEPROM read buffer - semaphore failed\n"); 3323 1.7.2.2 jdolecek return status; 3324 1.7.2.2 jdolecek } 3325 1.7.2.2 jdolecek 3326 1.7.2.2 jdolecek while (words) { 3327 1.7.2.2 jdolecek if (words > FW_MAX_READ_BUFFER_SIZE / 2) 3328 1.7.2.2 jdolecek words_to_read = FW_MAX_READ_BUFFER_SIZE / 2; 3329 1.7.2.2 jdolecek else 3330 1.7.2.2 jdolecek words_to_read = words; 3331 1.7.2.2 jdolecek 3332 1.7.2.2 jdolecek buffer.hdr.req.cmd = FW_READ_SHADOW_RAM_CMD; 3333 1.7.2.2 jdolecek buffer.hdr.req.buf_lenh = 0; 3334 1.7.2.2 jdolecek buffer.hdr.req.buf_lenl = FW_READ_SHADOW_RAM_LEN; 3335 1.7.2.2 jdolecek buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; 3336 1.7.2.2 jdolecek 3337 1.7.2.2 jdolecek /* convert offset from words to bytes */ 3338 1.7.2.2 jdolecek buffer.address = IXGBE_CPU_TO_BE32((offset + current_word) * 2); 3339 1.7.2.2 jdolecek buffer.length = IXGBE_CPU_TO_BE16(words_to_read * 2); 3340 1.7.2.2 jdolecek 3341 1.7.2.2 jdolecek status = ixgbe_hic_unlocked(hw, (u32 *)&buffer, sizeof(buffer), 3342 1.7.2.2 jdolecek IXGBE_HI_COMMAND_TIMEOUT); 3343 1.7.2.2 jdolecek 3344 1.7.2.2 jdolecek if (status) { 3345 1.7.2.2 jdolecek DEBUGOUT("Host interface command failed\n"); 3346 1.7.2.2 jdolecek goto out; 3347 1.7.2.2 jdolecek } 3348 1.7.2.2 jdolecek 3349 1.7.2.2 jdolecek for (i = 0; i < words_to_read; i++) { 3350 1.7.2.2 jdolecek u32 reg = IXGBE_FLEX_MNG + (FW_NVM_DATA_OFFSET << 2) + 3351 1.7.2.2 jdolecek 2 * i; 3352 1.7.2.2 jdolecek u32 value = IXGBE_READ_REG(hw, reg); 3353 1.7.2.2 jdolecek 3354 1.7.2.2 jdolecek data[current_word] = (u16)(value & 0xffff); 3355 1.7.2.2 jdolecek current_word++; 3356 1.7.2.2 jdolecek i++; 3357 1.7.2.2 jdolecek if (i < words_to_read) { 3358 1.7.2.2 jdolecek value >>= 16; 3359 1.7.2.2 jdolecek data[current_word] = (u16)(value & 0xffff); 3360 1.7.2.2 jdolecek current_word++; 3361 1.7.2.2 jdolecek } 3362 1.7.2.2 jdolecek } 3363 1.7.2.2 jdolecek words -= words_to_read; 3364 1.7.2.2 jdolecek } 3365 1.7.2.2 jdolecek 3366 1.7.2.2 jdolecek out: 3367 1.7.2.2 jdolecek hw->mac.ops.release_swfw_sync(hw, mask); 3368 1.7.2.2 jdolecek return status; 3369 1.7.2.2 jdolecek } 3370 1.7.2.2 jdolecek 3371 1.7.2.2 jdolecek /** 3372 1.7.2.2 jdolecek * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif 3373 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3374 1.7.2.2 jdolecek * @offset: offset of word in the EEPROM to write 3375 1.7.2.2 jdolecek * @data: word write to the EEPROM 3376 1.7.2.2 jdolecek * 3377 1.7.2.2 jdolecek * Write a 16 bit word to the EEPROM using the hostif. 3378 1.7.2.2 jdolecek **/ 3379 1.7.2.2 jdolecek s32 ixgbe_write_ee_hostif_data_X550(struct ixgbe_hw *hw, u16 offset, 3380 1.7.2.2 jdolecek u16 data) 3381 1.7.2.2 jdolecek { 3382 1.7.2.2 jdolecek s32 status; 3383 1.7.2.2 jdolecek struct ixgbe_hic_write_shadow_ram buffer; 3384 1.7.2.2 jdolecek 3385 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_write_ee_hostif_data_X550"); 3386 1.7.2.2 jdolecek 3387 1.7.2.2 jdolecek buffer.hdr.req.cmd = FW_WRITE_SHADOW_RAM_CMD; 3388 1.7.2.2 jdolecek buffer.hdr.req.buf_lenh = 0; 3389 1.7.2.2 jdolecek buffer.hdr.req.buf_lenl = FW_WRITE_SHADOW_RAM_LEN; 3390 1.7.2.2 jdolecek buffer.hdr.req.checksum = FW_DEFAULT_CHECKSUM; 3391 1.7.2.2 jdolecek 3392 1.7.2.2 jdolecek /* one word */ 3393 1.7.2.2 jdolecek buffer.length = IXGBE_CPU_TO_BE16(sizeof(u16)); 3394 1.7.2.2 jdolecek buffer.data = data; 3395 1.7.2.2 jdolecek buffer.address = IXGBE_CPU_TO_BE32(offset * 2); 3396 1.7.2.2 jdolecek 3397 1.7.2.2 jdolecek status = ixgbe_host_interface_command(hw, (u32 *)&buffer, 3398 1.7.2.2 jdolecek sizeof(buffer), 3399 1.7.2.2 jdolecek IXGBE_HI_COMMAND_TIMEOUT, FALSE); 3400 1.7.2.2 jdolecek 3401 1.7.2.2 jdolecek return status; 3402 1.7.2.2 jdolecek } 3403 1.7.2.2 jdolecek 3404 1.7.2.2 jdolecek /** 3405 1.7.2.2 jdolecek * ixgbe_write_ee_hostif_X550 - Write EEPROM word using hostif 3406 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3407 1.7.2.2 jdolecek * @offset: offset of word in the EEPROM to write 3408 1.7.2.2 jdolecek * @data: word write to the EEPROM 3409 1.7.2.2 jdolecek * 3410 1.7.2.2 jdolecek * Write a 16 bit word to the EEPROM using the hostif. 3411 1.7.2.2 jdolecek **/ 3412 1.7.2.2 jdolecek s32 ixgbe_write_ee_hostif_X550(struct ixgbe_hw *hw, u16 offset, 3413 1.7.2.2 jdolecek u16 data) 3414 1.7.2.2 jdolecek { 3415 1.7.2.2 jdolecek s32 status = IXGBE_SUCCESS; 3416 1.7.2.2 jdolecek 3417 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_write_ee_hostif_X550"); 3418 1.7.2.2 jdolecek 3419 1.7.2.2 jdolecek if (hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM) == 3420 1.7.2.2 jdolecek IXGBE_SUCCESS) { 3421 1.7.2.2 jdolecek status = ixgbe_write_ee_hostif_data_X550(hw, offset, data); 3422 1.7.2.2 jdolecek hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 3423 1.7.2.2 jdolecek } else { 3424 1.7.2.2 jdolecek DEBUGOUT("write ee hostif failed to get semaphore"); 3425 1.7.2.2 jdolecek status = IXGBE_ERR_SWFW_SYNC; 3426 1.7.2.2 jdolecek } 3427 1.7.2.2 jdolecek 3428 1.7.2.2 jdolecek return status; 3429 1.7.2.2 jdolecek } 3430 1.7.2.2 jdolecek 3431 1.7.2.2 jdolecek /** 3432 1.7.2.2 jdolecek * ixgbe_write_ee_hostif_buffer_X550 - Write EEPROM word(s) using hostif 3433 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3434 1.7.2.2 jdolecek * @offset: offset of word in the EEPROM to write 3435 1.7.2.2 jdolecek * @words: number of words 3436 1.7.2.2 jdolecek * @data: word(s) write to the EEPROM 3437 1.7.2.2 jdolecek * 3438 1.7.2.2 jdolecek * Write a 16 bit word(s) to the EEPROM using the hostif. 3439 1.7.2.2 jdolecek **/ 3440 1.7.2.2 jdolecek s32 ixgbe_write_ee_hostif_buffer_X550(struct ixgbe_hw *hw, 3441 1.7.2.2 jdolecek u16 offset, u16 words, u16 *data) 3442 1.7.2.2 jdolecek { 3443 1.7.2.2 jdolecek s32 status = IXGBE_SUCCESS; 3444 1.7.2.2 jdolecek u32 i = 0; 3445 1.7.2.2 jdolecek 3446 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_write_ee_hostif_buffer_X550"); 3447 1.7.2.2 jdolecek 3448 1.7.2.2 jdolecek /* Take semaphore for the entire operation. */ 3449 1.7.2.2 jdolecek status = hw->mac.ops.acquire_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 3450 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) { 3451 1.7.2.2 jdolecek DEBUGOUT("EEPROM write buffer - semaphore failed\n"); 3452 1.7.2.2 jdolecek goto out; 3453 1.7.2.2 jdolecek } 3454 1.7.2.2 jdolecek 3455 1.7.2.2 jdolecek for (i = 0; i < words; i++) { 3456 1.7.2.2 jdolecek status = ixgbe_write_ee_hostif_data_X550(hw, offset + i, 3457 1.7.2.2 jdolecek data[i]); 3458 1.7.2.2 jdolecek 3459 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) { 3460 1.7.2.2 jdolecek DEBUGOUT("Eeprom buffered write failed\n"); 3461 1.7.2.2 jdolecek break; 3462 1.7.2.2 jdolecek } 3463 1.7.2.2 jdolecek } 3464 1.7.2.2 jdolecek 3465 1.7.2.2 jdolecek hw->mac.ops.release_swfw_sync(hw, IXGBE_GSSR_EEP_SM); 3466 1.7.2.2 jdolecek out: 3467 1.7.2.2 jdolecek 3468 1.7.2.2 jdolecek return status; 3469 1.7.2.2 jdolecek } 3470 1.7.2.2 jdolecek 3471 1.7.2.2 jdolecek /** 3472 1.7.2.2 jdolecek * ixgbe_checksum_ptr_x550 - Checksum one pointer region 3473 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3474 1.7.2.2 jdolecek * @ptr: pointer offset in eeprom 3475 1.7.2.2 jdolecek * @size: size of section pointed by ptr, if 0 first word will be used as size 3476 1.7.2.2 jdolecek * @csum: address of checksum to update 3477 1.7.2.2 jdolecek * 3478 1.7.2.2 jdolecek * Returns error status for any failure 3479 1.7.2.2 jdolecek */ 3480 1.7.2.2 jdolecek static s32 ixgbe_checksum_ptr_x550(struct ixgbe_hw *hw, u16 ptr, 3481 1.7.2.2 jdolecek u16 size, u16 *csum, u16 *buffer, 3482 1.7.2.2 jdolecek u32 buffer_size) 3483 1.7.2.2 jdolecek { 3484 1.7.2.2 jdolecek u16 buf[256]; 3485 1.7.2.2 jdolecek s32 status; 3486 1.7.2.2 jdolecek u16 length, bufsz, i, start; 3487 1.7.2.2 jdolecek u16 *local_buffer; 3488 1.7.2.2 jdolecek 3489 1.7.2.2 jdolecek bufsz = sizeof(buf) / sizeof(buf[0]); 3490 1.7.2.2 jdolecek 3491 1.7.2.2 jdolecek /* Read a chunk at the pointer location */ 3492 1.7.2.2 jdolecek if (!buffer) { 3493 1.7.2.2 jdolecek status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, bufsz, buf); 3494 1.7.2.2 jdolecek if (status) { 3495 1.7.2.2 jdolecek DEBUGOUT("Failed to read EEPROM image\n"); 3496 1.7.2.2 jdolecek return status; 3497 1.7.2.2 jdolecek } 3498 1.7.2.2 jdolecek local_buffer = buf; 3499 1.7.2.2 jdolecek } else { 3500 1.7.2.2 jdolecek if (buffer_size < ptr) 3501 1.7.2.2 jdolecek return IXGBE_ERR_PARAM; 3502 1.7.2.2 jdolecek local_buffer = &buffer[ptr]; 3503 1.7.2.2 jdolecek } 3504 1.7.2.2 jdolecek 3505 1.7.2.2 jdolecek if (size) { 3506 1.7.2.2 jdolecek start = 0; 3507 1.7.2.2 jdolecek length = size; 3508 1.7.2.2 jdolecek } else { 3509 1.7.2.2 jdolecek start = 1; 3510 1.7.2.2 jdolecek length = local_buffer[0]; 3511 1.7.2.2 jdolecek 3512 1.7.2.2 jdolecek /* Skip pointer section if length is invalid. */ 3513 1.7.2.2 jdolecek if (length == 0xFFFF || length == 0 || 3514 1.7.2.2 jdolecek (ptr + length) >= hw->eeprom.word_size) 3515 1.7.2.2 jdolecek return IXGBE_SUCCESS; 3516 1.7.2.2 jdolecek } 3517 1.7.2.2 jdolecek 3518 1.7.2.2 jdolecek if (buffer && ((u32)start + (u32)length > buffer_size)) 3519 1.7.2.2 jdolecek return IXGBE_ERR_PARAM; 3520 1.7.2.2 jdolecek 3521 1.7.2.2 jdolecek for (i = start; length; i++, length--) { 3522 1.7.2.2 jdolecek if (i == bufsz && !buffer) { 3523 1.7.2.2 jdolecek ptr += bufsz; 3524 1.7.2.2 jdolecek i = 0; 3525 1.7.2.2 jdolecek if (length < bufsz) 3526 1.7.2.2 jdolecek bufsz = length; 3527 1.7.2.2 jdolecek 3528 1.7.2.2 jdolecek /* Read a chunk at the pointer location */ 3529 1.7.2.2 jdolecek status = ixgbe_read_ee_hostif_buffer_X550(hw, ptr, 3530 1.7.2.2 jdolecek bufsz, buf); 3531 1.7.2.2 jdolecek if (status) { 3532 1.7.2.2 jdolecek DEBUGOUT("Failed to read EEPROM image\n"); 3533 1.7.2.2 jdolecek return status; 3534 1.7.2.2 jdolecek } 3535 1.7.2.2 jdolecek } 3536 1.7.2.2 jdolecek *csum += local_buffer[i]; 3537 1.7.2.2 jdolecek } 3538 1.7.2.2 jdolecek return IXGBE_SUCCESS; 3539 1.7.2.2 jdolecek } 3540 1.7.2.2 jdolecek 3541 1.7.2.2 jdolecek /** 3542 1.7.2.2 jdolecek * ixgbe_calc_checksum_X550 - Calculates and returns the checksum 3543 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3544 1.7.2.2 jdolecek * @buffer: pointer to buffer containing calculated checksum 3545 1.7.2.2 jdolecek * @buffer_size: size of buffer 3546 1.7.2.2 jdolecek * 3547 1.7.2.2 jdolecek * Returns a negative error code on error, or the 16-bit checksum 3548 1.7.2.2 jdolecek **/ 3549 1.7.2.2 jdolecek s32 ixgbe_calc_checksum_X550(struct ixgbe_hw *hw, u16 *buffer, u32 buffer_size) 3550 1.7.2.2 jdolecek { 3551 1.7.2.2 jdolecek u16 eeprom_ptrs[IXGBE_EEPROM_LAST_WORD + 1]; 3552 1.7.2.2 jdolecek u16 *local_buffer; 3553 1.7.2.2 jdolecek s32 status; 3554 1.7.2.2 jdolecek u16 checksum = 0; 3555 1.7.2.2 jdolecek u16 pointer, i, size; 3556 1.7.2.2 jdolecek 3557 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_calc_eeprom_checksum_X550"); 3558 1.7.2.2 jdolecek 3559 1.7.2.2 jdolecek hw->eeprom.ops.init_params(hw); 3560 1.7.2.2 jdolecek 3561 1.7.2.2 jdolecek if (!buffer) { 3562 1.7.2.2 jdolecek /* Read pointer area */ 3563 1.7.2.2 jdolecek status = ixgbe_read_ee_hostif_buffer_X550(hw, 0, 3564 1.7.2.2 jdolecek IXGBE_EEPROM_LAST_WORD + 1, 3565 1.7.2.2 jdolecek eeprom_ptrs); 3566 1.7.2.2 jdolecek if (status) { 3567 1.7.2.2 jdolecek DEBUGOUT("Failed to read EEPROM image\n"); 3568 1.7.2.2 jdolecek return status; 3569 1.7.2.2 jdolecek } 3570 1.7.2.2 jdolecek local_buffer = eeprom_ptrs; 3571 1.7.2.2 jdolecek } else { 3572 1.7.2.2 jdolecek if (buffer_size < IXGBE_EEPROM_LAST_WORD) 3573 1.7.2.2 jdolecek return IXGBE_ERR_PARAM; 3574 1.7.2.2 jdolecek local_buffer = buffer; 3575 1.7.2.2 jdolecek } 3576 1.7.2.2 jdolecek 3577 1.7.2.2 jdolecek /* 3578 1.7.2.2 jdolecek * For X550 hardware include 0x0-0x41 in the checksum, skip the 3579 1.7.2.2 jdolecek * checksum word itself 3580 1.7.2.2 jdolecek */ 3581 1.7.2.2 jdolecek for (i = 0; i <= IXGBE_EEPROM_LAST_WORD; i++) 3582 1.7.2.2 jdolecek if (i != IXGBE_EEPROM_CHECKSUM) 3583 1.7.2.2 jdolecek checksum += local_buffer[i]; 3584 1.7.2.2 jdolecek 3585 1.7.2.2 jdolecek /* 3586 1.7.2.2 jdolecek * Include all data from pointers 0x3, 0x6-0xE. This excludes the 3587 1.7.2.2 jdolecek * FW, PHY module, and PCIe Expansion/Option ROM pointers. 3588 1.7.2.2 jdolecek */ 3589 1.7.2.2 jdolecek for (i = IXGBE_PCIE_ANALOG_PTR_X550; i < IXGBE_FW_PTR; i++) { 3590 1.7.2.2 jdolecek if (i == IXGBE_PHY_PTR || i == IXGBE_OPTION_ROM_PTR) 3591 1.7.2.2 jdolecek continue; 3592 1.7.2.2 jdolecek 3593 1.7.2.2 jdolecek pointer = local_buffer[i]; 3594 1.7.2.2 jdolecek 3595 1.7.2.2 jdolecek /* Skip pointer section if the pointer is invalid. */ 3596 1.7.2.2 jdolecek if (pointer == 0xFFFF || pointer == 0 || 3597 1.7.2.2 jdolecek pointer >= hw->eeprom.word_size) 3598 1.7.2.2 jdolecek continue; 3599 1.7.2.2 jdolecek 3600 1.7.2.2 jdolecek switch (i) { 3601 1.7.2.2 jdolecek case IXGBE_PCIE_GENERAL_PTR: 3602 1.7.2.2 jdolecek size = IXGBE_IXGBE_PCIE_GENERAL_SIZE; 3603 1.7.2.2 jdolecek break; 3604 1.7.2.2 jdolecek case IXGBE_PCIE_CONFIG0_PTR: 3605 1.7.2.2 jdolecek case IXGBE_PCIE_CONFIG1_PTR: 3606 1.7.2.2 jdolecek size = IXGBE_PCIE_CONFIG_SIZE; 3607 1.7.2.2 jdolecek break; 3608 1.7.2.2 jdolecek default: 3609 1.7.2.2 jdolecek size = 0; 3610 1.7.2.2 jdolecek break; 3611 1.7.2.2 jdolecek } 3612 1.7.2.2 jdolecek 3613 1.7.2.2 jdolecek status = ixgbe_checksum_ptr_x550(hw, pointer, size, &checksum, 3614 1.7.2.2 jdolecek buffer, buffer_size); 3615 1.7.2.2 jdolecek if (status) 3616 1.7.2.2 jdolecek return status; 3617 1.7.2.2 jdolecek } 3618 1.7.2.2 jdolecek 3619 1.7.2.2 jdolecek checksum = (u16)IXGBE_EEPROM_SUM - checksum; 3620 1.7.2.2 jdolecek 3621 1.7.2.2 jdolecek return (s32)checksum; 3622 1.7.2.2 jdolecek } 3623 1.7.2.2 jdolecek 3624 1.7.2.2 jdolecek /** 3625 1.7.2.2 jdolecek * ixgbe_calc_eeprom_checksum_X550 - Calculates and returns the checksum 3626 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3627 1.7.2.2 jdolecek * 3628 1.7.2.2 jdolecek * Returns a negative error code on error, or the 16-bit checksum 3629 1.7.2.2 jdolecek **/ 3630 1.7.2.2 jdolecek s32 ixgbe_calc_eeprom_checksum_X550(struct ixgbe_hw *hw) 3631 1.7.2.2 jdolecek { 3632 1.7.2.2 jdolecek return ixgbe_calc_checksum_X550(hw, NULL, 0); 3633 1.7.2.2 jdolecek } 3634 1.7.2.2 jdolecek 3635 1.7.2.2 jdolecek /** 3636 1.7.2.2 jdolecek * ixgbe_validate_eeprom_checksum_X550 - Validate EEPROM checksum 3637 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3638 1.7.2.2 jdolecek * @checksum_val: calculated checksum 3639 1.7.2.2 jdolecek * 3640 1.7.2.2 jdolecek * Performs checksum calculation and validates the EEPROM checksum. If the 3641 1.7.2.2 jdolecek * caller does not need checksum_val, the value can be NULL. 3642 1.7.2.2 jdolecek **/ 3643 1.7.2.2 jdolecek s32 ixgbe_validate_eeprom_checksum_X550(struct ixgbe_hw *hw, u16 *checksum_val) 3644 1.7.2.2 jdolecek { 3645 1.7.2.2 jdolecek s32 status; 3646 1.7.2.2 jdolecek u16 checksum; 3647 1.7.2.2 jdolecek u16 read_checksum = 0; 3648 1.7.2.2 jdolecek 3649 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_validate_eeprom_checksum_X550"); 3650 1.7.2.2 jdolecek 3651 1.7.2.2 jdolecek /* Read the first word from the EEPROM. If this times out or fails, do 3652 1.7.2.2 jdolecek * not continue or we could be in for a very long wait while every 3653 1.7.2.2 jdolecek * EEPROM read fails 3654 1.7.2.2 jdolecek */ 3655 1.7.2.2 jdolecek status = hw->eeprom.ops.read(hw, 0, &checksum); 3656 1.7.2.2 jdolecek if (status) { 3657 1.7.2.2 jdolecek DEBUGOUT("EEPROM read failed\n"); 3658 1.7.2.2 jdolecek return status; 3659 1.7.2.2 jdolecek } 3660 1.7.2.2 jdolecek 3661 1.7.2.2 jdolecek status = hw->eeprom.ops.calc_checksum(hw); 3662 1.7.2.2 jdolecek if (status < 0) 3663 1.7.2.2 jdolecek return status; 3664 1.7.2.2 jdolecek 3665 1.7.2.2 jdolecek checksum = (u16)(status & 0xffff); 3666 1.7.2.2 jdolecek 3667 1.7.2.2 jdolecek status = ixgbe_read_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM, 3668 1.7.2.2 jdolecek &read_checksum); 3669 1.7.2.2 jdolecek if (status) 3670 1.7.2.2 jdolecek return status; 3671 1.7.2.2 jdolecek 3672 1.7.2.2 jdolecek /* Verify read checksum from EEPROM is the same as 3673 1.7.2.2 jdolecek * calculated checksum 3674 1.7.2.2 jdolecek */ 3675 1.7.2.2 jdolecek if (read_checksum != checksum) { 3676 1.7.2.2 jdolecek status = IXGBE_ERR_EEPROM_CHECKSUM; 3677 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_INVALID_STATE, 3678 1.7.2.2 jdolecek "Invalid EEPROM checksum"); 3679 1.7.2.2 jdolecek } 3680 1.7.2.2 jdolecek 3681 1.7.2.2 jdolecek /* If the user cares, return the calculated checksum */ 3682 1.7.2.2 jdolecek if (checksum_val) 3683 1.7.2.2 jdolecek *checksum_val = checksum; 3684 1.7.2.2 jdolecek 3685 1.7.2.2 jdolecek return status; 3686 1.7.2.2 jdolecek } 3687 1.7.2.2 jdolecek 3688 1.7.2.2 jdolecek /** 3689 1.7.2.2 jdolecek * ixgbe_update_eeprom_checksum_X550 - Updates the EEPROM checksum and flash 3690 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3691 1.7.2.2 jdolecek * 3692 1.7.2.2 jdolecek * After writing EEPROM to shadow RAM using EEWR register, software calculates 3693 1.7.2.2 jdolecek * checksum and updates the EEPROM and instructs the hardware to update 3694 1.7.2.2 jdolecek * the flash. 3695 1.7.2.2 jdolecek **/ 3696 1.7.2.2 jdolecek s32 ixgbe_update_eeprom_checksum_X550(struct ixgbe_hw *hw) 3697 1.7.2.2 jdolecek { 3698 1.7.2.2 jdolecek s32 status; 3699 1.7.2.2 jdolecek u16 checksum = 0; 3700 1.7.2.2 jdolecek 3701 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_update_eeprom_checksum_X550"); 3702 1.7.2.2 jdolecek 3703 1.7.2.2 jdolecek /* Read the first word from the EEPROM. If this times out or fails, do 3704 1.7.2.2 jdolecek * not continue or we could be in for a very long wait while every 3705 1.7.2.2 jdolecek * EEPROM read fails 3706 1.7.2.2 jdolecek */ 3707 1.7.2.2 jdolecek status = ixgbe_read_ee_hostif_X550(hw, 0, &checksum); 3708 1.7.2.2 jdolecek if (status) { 3709 1.7.2.2 jdolecek DEBUGOUT("EEPROM read failed\n"); 3710 1.7.2.2 jdolecek return status; 3711 1.7.2.2 jdolecek } 3712 1.7.2.2 jdolecek 3713 1.7.2.2 jdolecek status = ixgbe_calc_eeprom_checksum_X550(hw); 3714 1.7.2.2 jdolecek if (status < 0) 3715 1.7.2.2 jdolecek return status; 3716 1.7.2.2 jdolecek 3717 1.7.2.2 jdolecek checksum = (u16)(status & 0xffff); 3718 1.7.2.2 jdolecek 3719 1.7.2.2 jdolecek status = ixgbe_write_ee_hostif_X550(hw, IXGBE_EEPROM_CHECKSUM, 3720 1.7.2.2 jdolecek checksum); 3721 1.7.2.2 jdolecek if (status) 3722 1.7.2.2 jdolecek return status; 3723 1.7.2.2 jdolecek 3724 1.7.2.2 jdolecek status = ixgbe_update_flash_X550(hw); 3725 1.7.2.2 jdolecek 3726 1.7.2.2 jdolecek return status; 3727 1.7.2.2 jdolecek } 3728 1.7.2.2 jdolecek 3729 1.7.2.2 jdolecek /** 3730 1.7.2.2 jdolecek * ixgbe_update_flash_X550 - Instruct HW to copy EEPROM to Flash device 3731 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3732 1.7.2.2 jdolecek * 3733 1.7.2.2 jdolecek * Issue a shadow RAM dump to FW to copy EEPROM from shadow RAM to the flash. 3734 1.7.2.2 jdolecek **/ 3735 1.7.2.2 jdolecek s32 ixgbe_update_flash_X550(struct ixgbe_hw *hw) 3736 1.7.2.2 jdolecek { 3737 1.7.2.2 jdolecek s32 status = IXGBE_SUCCESS; 3738 1.7.2.2 jdolecek union ixgbe_hic_hdr2 buffer; 3739 1.7.2.2 jdolecek 3740 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_update_flash_X550"); 3741 1.7.2.2 jdolecek 3742 1.7.2.2 jdolecek buffer.req.cmd = FW_SHADOW_RAM_DUMP_CMD; 3743 1.7.2.2 jdolecek buffer.req.buf_lenh = 0; 3744 1.7.2.2 jdolecek buffer.req.buf_lenl = FW_SHADOW_RAM_DUMP_LEN; 3745 1.7.2.2 jdolecek buffer.req.checksum = FW_DEFAULT_CHECKSUM; 3746 1.7.2.2 jdolecek 3747 1.7.2.2 jdolecek status = ixgbe_host_interface_command(hw, (u32 *)&buffer, 3748 1.7.2.2 jdolecek sizeof(buffer), 3749 1.7.2.2 jdolecek IXGBE_HI_COMMAND_TIMEOUT, FALSE); 3750 1.7.2.2 jdolecek 3751 1.7.2.2 jdolecek return status; 3752 1.7.2.2 jdolecek } 3753 1.7.2.2 jdolecek 3754 1.7.2.2 jdolecek /** 3755 1.7.2.2 jdolecek * ixgbe_get_supported_physical_layer_X550em - Returns physical layer type 3756 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3757 1.7.2.2 jdolecek * 3758 1.7.2.2 jdolecek * Determines physical layer capabilities of the current configuration. 3759 1.7.2.2 jdolecek **/ 3760 1.7.2.2 jdolecek u64 ixgbe_get_supported_physical_layer_X550em(struct ixgbe_hw *hw) 3761 1.7.2.2 jdolecek { 3762 1.7.2.2 jdolecek u64 physical_layer = IXGBE_PHYSICAL_LAYER_UNKNOWN; 3763 1.7.2.2 jdolecek u16 ext_ability = 0; 3764 1.7.2.2 jdolecek 3765 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_get_supported_physical_layer_X550em"); 3766 1.7.2.2 jdolecek 3767 1.7.2.2 jdolecek hw->phy.ops.identify(hw); 3768 1.7.2.2 jdolecek 3769 1.7.2.2 jdolecek switch (hw->phy.type) { 3770 1.7.2.2 jdolecek case ixgbe_phy_x550em_kr: 3771 1.7.2.2 jdolecek if (hw->mac.type == ixgbe_mac_X550EM_a) { 3772 1.7.2.2 jdolecek if (hw->phy.nw_mng_if_sel & 3773 1.7.2.2 jdolecek IXGBE_NW_MNG_IF_SEL_PHY_SPEED_2_5G) { 3774 1.7.2.2 jdolecek physical_layer = 3775 1.7.2.2 jdolecek IXGBE_PHYSICAL_LAYER_2500BASE_KX; 3776 1.7.2.2 jdolecek break; 3777 1.7.2.2 jdolecek } else if (hw->device_id == 3778 1.7.2.2 jdolecek IXGBE_DEV_ID_X550EM_A_KR_L) { 3779 1.7.2.2 jdolecek physical_layer = 3780 1.7.2.2 jdolecek IXGBE_PHYSICAL_LAYER_1000BASE_KX; 3781 1.7.2.2 jdolecek break; 3782 1.7.2.2 jdolecek } 3783 1.7.2.2 jdolecek } 3784 1.7.2.2 jdolecek /* fall through */ 3785 1.7.2.2 jdolecek case ixgbe_phy_x550em_xfi: 3786 1.7.2.2 jdolecek physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KR | 3787 1.7.2.2 jdolecek IXGBE_PHYSICAL_LAYER_1000BASE_KX; 3788 1.7.2.2 jdolecek break; 3789 1.7.2.2 jdolecek case ixgbe_phy_x550em_kx4: 3790 1.7.2.2 jdolecek physical_layer = IXGBE_PHYSICAL_LAYER_10GBASE_KX4 | 3791 1.7.2.2 jdolecek IXGBE_PHYSICAL_LAYER_1000BASE_KX; 3792 1.7.2.2 jdolecek break; 3793 1.7.2.2 jdolecek case ixgbe_phy_x550em_ext_t: 3794 1.7.2.2 jdolecek hw->phy.ops.read_reg(hw, IXGBE_MDIO_PHY_EXT_ABILITY, 3795 1.7.2.2 jdolecek IXGBE_MDIO_PMA_PMD_DEV_TYPE, 3796 1.7.2.2 jdolecek &ext_ability); 3797 1.7.2.2 jdolecek if (ext_ability & IXGBE_MDIO_PHY_10GBASET_ABILITY) 3798 1.7.2.2 jdolecek physical_layer |= IXGBE_PHYSICAL_LAYER_10GBASE_T; 3799 1.7.2.2 jdolecek if (ext_ability & IXGBE_MDIO_PHY_1000BASET_ABILITY) 3800 1.7.2.2 jdolecek physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; 3801 1.7.2.2 jdolecek break; 3802 1.7.2.2 jdolecek case ixgbe_phy_fw: 3803 1.7.2.2 jdolecek if (hw->phy.speeds_supported & IXGBE_LINK_SPEED_1GB_FULL) 3804 1.7.2.2 jdolecek physical_layer |= IXGBE_PHYSICAL_LAYER_1000BASE_T; 3805 1.7.2.2 jdolecek if (hw->phy.speeds_supported & IXGBE_LINK_SPEED_100_FULL) 3806 1.7.2.2 jdolecek physical_layer |= IXGBE_PHYSICAL_LAYER_100BASE_TX; 3807 1.7.2.2 jdolecek if (hw->phy.speeds_supported & IXGBE_LINK_SPEED_10_FULL) 3808 1.7.2.2 jdolecek physical_layer |= IXGBE_PHYSICAL_LAYER_10BASE_T; 3809 1.7.2.2 jdolecek break; 3810 1.7.2.2 jdolecek case ixgbe_phy_sgmii: 3811 1.7.2.2 jdolecek physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_KX; 3812 1.7.2.2 jdolecek break; 3813 1.7.2.2 jdolecek case ixgbe_phy_ext_1g_t: 3814 1.7.2.2 jdolecek physical_layer = IXGBE_PHYSICAL_LAYER_1000BASE_T; 3815 1.7.2.2 jdolecek break; 3816 1.7.2.2 jdolecek default: 3817 1.7.2.2 jdolecek break; 3818 1.7.2.2 jdolecek } 3819 1.7.2.2 jdolecek 3820 1.7.2.2 jdolecek if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber) 3821 1.7.2.2 jdolecek physical_layer = ixgbe_get_supported_phy_sfp_layer_generic(hw); 3822 1.7.2.2 jdolecek 3823 1.7.2.2 jdolecek return physical_layer; 3824 1.7.2.2 jdolecek } 3825 1.7.2.2 jdolecek 3826 1.7.2.2 jdolecek /** 3827 1.7.2.2 jdolecek * ixgbe_get_bus_info_x550em - Set PCI bus info 3828 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3829 1.7.2.2 jdolecek * 3830 1.7.2.2 jdolecek * Sets bus link width and speed to unknown because X550em is 3831 1.7.2.2 jdolecek * not a PCI device. 3832 1.7.2.2 jdolecek **/ 3833 1.7.2.2 jdolecek s32 ixgbe_get_bus_info_X550em(struct ixgbe_hw *hw) 3834 1.7.2.2 jdolecek { 3835 1.7.2.2 jdolecek 3836 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_get_bus_info_x550em"); 3837 1.7.2.2 jdolecek 3838 1.7.2.2 jdolecek hw->bus.width = ixgbe_bus_width_unknown; 3839 1.7.2.2 jdolecek hw->bus.speed = ixgbe_bus_speed_unknown; 3840 1.7.2.2 jdolecek 3841 1.7.2.2 jdolecek hw->mac.ops.set_lan_id(hw); 3842 1.7.2.2 jdolecek 3843 1.7.2.2 jdolecek return IXGBE_SUCCESS; 3844 1.7.2.2 jdolecek } 3845 1.7.2.2 jdolecek 3846 1.7.2.2 jdolecek /** 3847 1.7.2.2 jdolecek * ixgbe_disable_rx_x550 - Disable RX unit 3848 1.7.2.2 jdolecek * 3849 1.7.2.2 jdolecek * Enables the Rx DMA unit for x550 3850 1.7.2.2 jdolecek **/ 3851 1.7.2.2 jdolecek void ixgbe_disable_rx_x550(struct ixgbe_hw *hw) 3852 1.7.2.2 jdolecek { 3853 1.7.2.2 jdolecek u32 rxctrl, pfdtxgswc; 3854 1.7.2.2 jdolecek s32 status; 3855 1.7.2.2 jdolecek struct ixgbe_hic_disable_rxen fw_cmd; 3856 1.7.2.2 jdolecek 3857 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_disable_rx_dma_x550"); 3858 1.7.2.2 jdolecek 3859 1.7.2.2 jdolecek rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); 3860 1.7.2.2 jdolecek if (rxctrl & IXGBE_RXCTRL_RXEN) { 3861 1.7.2.2 jdolecek pfdtxgswc = IXGBE_READ_REG(hw, IXGBE_PFDTXGSWC); 3862 1.7.2.2 jdolecek if (pfdtxgswc & IXGBE_PFDTXGSWC_VT_LBEN) { 3863 1.7.2.2 jdolecek pfdtxgswc &= ~IXGBE_PFDTXGSWC_VT_LBEN; 3864 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_PFDTXGSWC, pfdtxgswc); 3865 1.7.2.2 jdolecek hw->mac.set_lben = TRUE; 3866 1.7.2.2 jdolecek } else { 3867 1.7.2.2 jdolecek hw->mac.set_lben = FALSE; 3868 1.7.2.2 jdolecek } 3869 1.7.2.2 jdolecek 3870 1.7.2.2 jdolecek fw_cmd.hdr.cmd = FW_DISABLE_RXEN_CMD; 3871 1.7.2.2 jdolecek fw_cmd.hdr.buf_len = FW_DISABLE_RXEN_LEN; 3872 1.7.2.2 jdolecek fw_cmd.hdr.checksum = FW_DEFAULT_CHECKSUM; 3873 1.7.2.2 jdolecek fw_cmd.port_number = (u8)hw->bus.lan_id; 3874 1.7.2.2 jdolecek 3875 1.7.2.2 jdolecek status = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, 3876 1.7.2.2 jdolecek sizeof(struct ixgbe_hic_disable_rxen), 3877 1.7.2.2 jdolecek IXGBE_HI_COMMAND_TIMEOUT, TRUE); 3878 1.7.2.2 jdolecek 3879 1.7.2.2 jdolecek /* If we fail - disable RX using register write */ 3880 1.7.2.2 jdolecek if (status) { 3881 1.7.2.2 jdolecek rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL); 3882 1.7.2.2 jdolecek if (rxctrl & IXGBE_RXCTRL_RXEN) { 3883 1.7.2.2 jdolecek rxctrl &= ~IXGBE_RXCTRL_RXEN; 3884 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl); 3885 1.7.2.2 jdolecek } 3886 1.7.2.2 jdolecek } 3887 1.7.2.2 jdolecek } 3888 1.7.2.2 jdolecek } 3889 1.7.2.2 jdolecek 3890 1.7.2.2 jdolecek /** 3891 1.7.2.2 jdolecek * ixgbe_enter_lplu_x550em - Transition to low power states 3892 1.7.2.2 jdolecek * @hw: pointer to hardware structure 3893 1.7.2.2 jdolecek * 3894 1.7.2.2 jdolecek * Configures Low Power Link Up on transition to low power states 3895 1.7.2.2 jdolecek * (from D0 to non-D0). Link is required to enter LPLU so avoid resetting the 3896 1.7.2.2 jdolecek * X557 PHY immediately prior to entering LPLU. 3897 1.7.2.2 jdolecek **/ 3898 1.7.2.2 jdolecek s32 ixgbe_enter_lplu_t_x550em(struct ixgbe_hw *hw) 3899 1.7.2.2 jdolecek { 3900 1.7.2.2 jdolecek u16 an_10g_cntl_reg, autoneg_reg, speed; 3901 1.7.2.2 jdolecek s32 status; 3902 1.7.2.2 jdolecek ixgbe_link_speed lcd_speed; 3903 1.7.2.2 jdolecek u32 save_autoneg; 3904 1.7.2.2 jdolecek bool link_up; 3905 1.7.2.2 jdolecek 3906 1.7.2.2 jdolecek /* SW LPLU not required on later HW revisions. */ 3907 1.7.2.2 jdolecek if ((hw->mac.type == ixgbe_mac_X550EM_x) && 3908 1.7.2.2 jdolecek (IXGBE_FUSES0_REV_MASK & 3909 1.7.2.2 jdolecek IXGBE_READ_REG(hw, IXGBE_FUSES0_GROUP(0)))) 3910 1.7.2.2 jdolecek return IXGBE_SUCCESS; 3911 1.7.2.2 jdolecek 3912 1.7.2.2 jdolecek /* If blocked by MNG FW, then don't restart AN */ 3913 1.7.2.2 jdolecek if (ixgbe_check_reset_blocked(hw)) 3914 1.7.2.2 jdolecek return IXGBE_SUCCESS; 3915 1.7.2.2 jdolecek 3916 1.7.2.2 jdolecek status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); 3917 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3918 1.7.2.2 jdolecek return status; 3919 1.7.2.2 jdolecek 3920 1.7.2.2 jdolecek status = ixgbe_read_eeprom(hw, NVM_INIT_CTRL_3, &hw->eeprom.ctrl_word_3); 3921 1.7.2.2 jdolecek 3922 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3923 1.7.2.2 jdolecek return status; 3924 1.7.2.2 jdolecek 3925 1.7.2.2 jdolecek /* If link is down, LPLU disabled in NVM, WoL disabled, or manageability 3926 1.7.2.2 jdolecek * disabled, then force link down by entering low power mode. 3927 1.7.2.2 jdolecek */ 3928 1.7.2.2 jdolecek if (!link_up || !(hw->eeprom.ctrl_word_3 & NVM_INIT_CTRL_3_LPLU) || 3929 1.7.2.2 jdolecek !(hw->wol_enabled || ixgbe_mng_present(hw))) 3930 1.7.2.2 jdolecek return ixgbe_set_copper_phy_power(hw, FALSE); 3931 1.7.2.2 jdolecek 3932 1.7.2.2 jdolecek /* Determine LCD */ 3933 1.7.2.2 jdolecek status = ixgbe_get_lcd_t_x550em(hw, &lcd_speed); 3934 1.7.2.2 jdolecek 3935 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3936 1.7.2.2 jdolecek return status; 3937 1.7.2.2 jdolecek 3938 1.7.2.2 jdolecek /* If no valid LCD link speed, then force link down and exit. */ 3939 1.7.2.2 jdolecek if (lcd_speed == IXGBE_LINK_SPEED_UNKNOWN) 3940 1.7.2.2 jdolecek return ixgbe_set_copper_phy_power(hw, FALSE); 3941 1.7.2.2 jdolecek 3942 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_STAT, 3943 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 3944 1.7.2.2 jdolecek &speed); 3945 1.7.2.2 jdolecek 3946 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3947 1.7.2.2 jdolecek return status; 3948 1.7.2.2 jdolecek 3949 1.7.2.2 jdolecek /* If no link now, speed is invalid so take link down */ 3950 1.7.2.2 jdolecek status = ixgbe_ext_phy_t_x550em_get_link(hw, &link_up); 3951 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3952 1.7.2.2 jdolecek return ixgbe_set_copper_phy_power(hw, FALSE); 3953 1.7.2.2 jdolecek 3954 1.7.2.2 jdolecek /* clear everything but the speed bits */ 3955 1.7.2.2 jdolecek speed &= IXGBE_MDIO_AUTO_NEG_VEN_STAT_SPEED_MASK; 3956 1.7.2.2 jdolecek 3957 1.7.2.2 jdolecek /* If current speed is already LCD, then exit. */ 3958 1.7.2.2 jdolecek if (((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_1GB) && 3959 1.7.2.2 jdolecek (lcd_speed == IXGBE_LINK_SPEED_1GB_FULL)) || 3960 1.7.2.2 jdolecek ((speed == IXGBE_MDIO_AUTO_NEG_VENDOR_STATUS_10GB) && 3961 1.7.2.2 jdolecek (lcd_speed == IXGBE_LINK_SPEED_10GB_FULL))) 3962 1.7.2.2 jdolecek return status; 3963 1.7.2.2 jdolecek 3964 1.7.2.2 jdolecek /* Clear AN completed indication */ 3965 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_VENDOR_TX_ALARM, 3966 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 3967 1.7.2.2 jdolecek &autoneg_reg); 3968 1.7.2.2 jdolecek 3969 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3970 1.7.2.2 jdolecek return status; 3971 1.7.2.2 jdolecek 3972 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MII_10GBASE_T_AUTONEG_CTRL_REG, 3973 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 3974 1.7.2.2 jdolecek &an_10g_cntl_reg); 3975 1.7.2.2 jdolecek 3976 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3977 1.7.2.2 jdolecek return status; 3978 1.7.2.2 jdolecek 3979 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, 3980 1.7.2.2 jdolecek IXGBE_MII_AUTONEG_VENDOR_PROVISION_1_REG, 3981 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 3982 1.7.2.2 jdolecek &autoneg_reg); 3983 1.7.2.2 jdolecek 3984 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 3985 1.7.2.2 jdolecek return status; 3986 1.7.2.2 jdolecek 3987 1.7.2.2 jdolecek save_autoneg = hw->phy.autoneg_advertised; 3988 1.7.2.2 jdolecek 3989 1.7.2.2 jdolecek /* Setup link at least common link speed */ 3990 1.7.2.2 jdolecek status = hw->mac.ops.setup_link(hw, lcd_speed, FALSE); 3991 1.7.2.2 jdolecek 3992 1.7.2.2 jdolecek /* restore autoneg from before setting lplu speed */ 3993 1.7.2.2 jdolecek hw->phy.autoneg_advertised = save_autoneg; 3994 1.7.2.2 jdolecek 3995 1.7.2.2 jdolecek return status; 3996 1.7.2.2 jdolecek } 3997 1.7.2.2 jdolecek 3998 1.7.2.2 jdolecek /** 3999 1.7.2.2 jdolecek * ixgbe_get_lcd_x550em - Determine lowest common denominator 4000 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4001 1.7.2.2 jdolecek * @lcd_speed: pointer to lowest common link speed 4002 1.7.2.2 jdolecek * 4003 1.7.2.2 jdolecek * Determine lowest common link speed with link partner. 4004 1.7.2.2 jdolecek **/ 4005 1.7.2.2 jdolecek s32 ixgbe_get_lcd_t_x550em(struct ixgbe_hw *hw, ixgbe_link_speed *lcd_speed) 4006 1.7.2.2 jdolecek { 4007 1.7.2.2 jdolecek u16 an_lp_status; 4008 1.7.2.2 jdolecek s32 status; 4009 1.7.2.2 jdolecek u16 word = hw->eeprom.ctrl_word_3; 4010 1.7.2.2 jdolecek 4011 1.7.2.2 jdolecek *lcd_speed = IXGBE_LINK_SPEED_UNKNOWN; 4012 1.7.2.2 jdolecek 4013 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_AUTO_NEG_LP_STATUS, 4014 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 4015 1.7.2.2 jdolecek &an_lp_status); 4016 1.7.2.2 jdolecek 4017 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 4018 1.7.2.2 jdolecek return status; 4019 1.7.2.2 jdolecek 4020 1.7.2.2 jdolecek /* If link partner advertised 1G, return 1G */ 4021 1.7.2.2 jdolecek if (an_lp_status & IXGBE_AUTO_NEG_LP_1000BASE_CAP) { 4022 1.7.2.2 jdolecek *lcd_speed = IXGBE_LINK_SPEED_1GB_FULL; 4023 1.7.2.2 jdolecek return status; 4024 1.7.2.2 jdolecek } 4025 1.7.2.2 jdolecek 4026 1.7.2.2 jdolecek /* If 10G disabled for LPLU via NVM D10GMP, then return no valid LCD */ 4027 1.7.2.2 jdolecek if ((hw->bus.lan_id && (word & NVM_INIT_CTRL_3_D10GMP_PORT1)) || 4028 1.7.2.2 jdolecek (word & NVM_INIT_CTRL_3_D10GMP_PORT0)) 4029 1.7.2.2 jdolecek return status; 4030 1.7.2.2 jdolecek 4031 1.7.2.2 jdolecek /* Link partner not capable of lower speeds, return 10G */ 4032 1.7.2.2 jdolecek *lcd_speed = IXGBE_LINK_SPEED_10GB_FULL; 4033 1.7.2.2 jdolecek return status; 4034 1.7.2.2 jdolecek } 4035 1.7.2.2 jdolecek 4036 1.7.2.2 jdolecek /** 4037 1.7.2.2 jdolecek * ixgbe_setup_fc_X550em - Set up flow control 4038 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4039 1.7.2.2 jdolecek * 4040 1.7.2.2 jdolecek * Called at init time to set up flow control. 4041 1.7.2.2 jdolecek **/ 4042 1.7.2.2 jdolecek s32 ixgbe_setup_fc_X550em(struct ixgbe_hw *hw) 4043 1.7.2.2 jdolecek { 4044 1.7.2.2 jdolecek s32 ret_val = IXGBE_SUCCESS; 4045 1.7.2.2 jdolecek u32 pause, asm_dir, reg_val; 4046 1.7.2.2 jdolecek 4047 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_setup_fc_X550em"); 4048 1.7.2.2 jdolecek 4049 1.7.2.2 jdolecek /* Validate the requested mode */ 4050 1.7.2.2 jdolecek if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { 4051 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, 4052 1.7.2.2 jdolecek "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); 4053 1.7.2.2 jdolecek ret_val = IXGBE_ERR_INVALID_LINK_SETTINGS; 4054 1.7.2.2 jdolecek goto out; 4055 1.7.2.2 jdolecek } 4056 1.7.2.2 jdolecek 4057 1.7.2.2 jdolecek /* 10gig parts do not have a word in the EEPROM to determine the 4058 1.7.2.2 jdolecek * default flow control setting, so we explicitly set it to full. 4059 1.7.2.2 jdolecek */ 4060 1.7.2.2 jdolecek if (hw->fc.requested_mode == ixgbe_fc_default) 4061 1.7.2.2 jdolecek hw->fc.requested_mode = ixgbe_fc_full; 4062 1.7.2.2 jdolecek 4063 1.7.2.2 jdolecek /* Determine PAUSE and ASM_DIR bits. */ 4064 1.7.2.2 jdolecek switch (hw->fc.requested_mode) { 4065 1.7.2.2 jdolecek case ixgbe_fc_none: 4066 1.7.2.2 jdolecek pause = 0; 4067 1.7.2.2 jdolecek asm_dir = 0; 4068 1.7.2.2 jdolecek break; 4069 1.7.2.2 jdolecek case ixgbe_fc_tx_pause: 4070 1.7.2.2 jdolecek pause = 0; 4071 1.7.2.2 jdolecek asm_dir = 1; 4072 1.7.2.2 jdolecek break; 4073 1.7.2.2 jdolecek case ixgbe_fc_rx_pause: 4074 1.7.2.2 jdolecek /* Rx Flow control is enabled and Tx Flow control is 4075 1.7.2.2 jdolecek * disabled by software override. Since there really 4076 1.7.2.2 jdolecek * isn't a way to advertise that we are capable of RX 4077 1.7.2.2 jdolecek * Pause ONLY, we will advertise that we support both 4078 1.7.2.2 jdolecek * symmetric and asymmetric Rx PAUSE, as such we fall 4079 1.7.2.2 jdolecek * through to the fc_full statement. Later, we will 4080 1.7.2.2 jdolecek * disable the adapter's ability to send PAUSE frames. 4081 1.7.2.2 jdolecek */ 4082 1.7.2.2 jdolecek case ixgbe_fc_full: 4083 1.7.2.2 jdolecek pause = 1; 4084 1.7.2.2 jdolecek asm_dir = 1; 4085 1.7.2.2 jdolecek break; 4086 1.7.2.2 jdolecek default: 4087 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, 4088 1.7.2.2 jdolecek "Flow control param set incorrectly\n"); 4089 1.7.2.2 jdolecek ret_val = IXGBE_ERR_CONFIG; 4090 1.7.2.2 jdolecek goto out; 4091 1.7.2.2 jdolecek } 4092 1.7.2.2 jdolecek 4093 1.7.2.2 jdolecek switch (hw->device_id) { 4094 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_KR: 4095 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_KR: 4096 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_A_KR_L: 4097 1.7.2.2 jdolecek ret_val = hw->mac.ops.read_iosf_sb_reg(hw, 4098 1.7.2.2 jdolecek IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), 4099 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, ®_val); 4100 1.7.2.2 jdolecek if (ret_val != IXGBE_SUCCESS) 4101 1.7.2.2 jdolecek goto out; 4102 1.7.2.2 jdolecek reg_val &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | 4103 1.7.2.2 jdolecek IXGBE_KRM_AN_CNTL_1_ASM_PAUSE); 4104 1.7.2.2 jdolecek if (pause) 4105 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; 4106 1.7.2.2 jdolecek if (asm_dir) 4107 1.7.2.2 jdolecek reg_val |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; 4108 1.7.2.2 jdolecek ret_val = hw->mac.ops.write_iosf_sb_reg(hw, 4109 1.7.2.2 jdolecek IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), 4110 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, reg_val); 4111 1.7.2.2 jdolecek 4112 1.7.2.2 jdolecek /* This device does not fully support AN. */ 4113 1.7.2.2 jdolecek hw->fc.disable_fc_autoneg = TRUE; 4114 1.7.2.2 jdolecek break; 4115 1.7.2.2 jdolecek case IXGBE_DEV_ID_X550EM_X_XFI: 4116 1.7.2.2 jdolecek hw->fc.disable_fc_autoneg = TRUE; 4117 1.7.2.2 jdolecek break; 4118 1.7.2.2 jdolecek default: 4119 1.7.2.2 jdolecek break; 4120 1.7.2.2 jdolecek } 4121 1.7.2.2 jdolecek 4122 1.7.2.2 jdolecek out: 4123 1.7.2.2 jdolecek return ret_val; 4124 1.7.2.2 jdolecek } 4125 1.7.2.2 jdolecek 4126 1.7.2.2 jdolecek /** 4127 1.7.2.2 jdolecek * ixgbe_fc_autoneg_backplane_x550em_a - Enable flow control IEEE clause 37 4128 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4129 1.7.2.2 jdolecek * 4130 1.7.2.2 jdolecek * Enable flow control according to IEEE clause 37. 4131 1.7.2.2 jdolecek **/ 4132 1.7.2.2 jdolecek void ixgbe_fc_autoneg_backplane_x550em_a(struct ixgbe_hw *hw) 4133 1.7.2.2 jdolecek { 4134 1.7.2.2 jdolecek u32 link_s1, lp_an_page_low, an_cntl_1; 4135 1.7.2.2 jdolecek s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED; 4136 1.7.2.2 jdolecek ixgbe_link_speed speed; 4137 1.7.2.2 jdolecek bool link_up; 4138 1.7.2.2 jdolecek 4139 1.7.2.2 jdolecek /* AN should have completed when the cable was plugged in. 4140 1.7.2.2 jdolecek * Look for reasons to bail out. Bail out if: 4141 1.7.2.2 jdolecek * - FC autoneg is disabled, or if 4142 1.7.2.2 jdolecek * - link is not up. 4143 1.7.2.2 jdolecek */ 4144 1.7.2.2 jdolecek if (hw->fc.disable_fc_autoneg) { 4145 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, 4146 1.7.2.2 jdolecek "Flow control autoneg is disabled"); 4147 1.7.2.2 jdolecek goto out; 4148 1.7.2.2 jdolecek } 4149 1.7.2.2 jdolecek 4150 1.7.2.2 jdolecek hw->mac.ops.check_link(hw, &speed, &link_up, FALSE); 4151 1.7.2.2 jdolecek if (!link_up) { 4152 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down"); 4153 1.7.2.2 jdolecek goto out; 4154 1.7.2.2 jdolecek } 4155 1.7.2.2 jdolecek 4156 1.7.2.2 jdolecek /* Check at auto-negotiation has completed */ 4157 1.7.2.2 jdolecek status = hw->mac.ops.read_iosf_sb_reg(hw, 4158 1.7.2.2 jdolecek IXGBE_KRM_LINK_S1(hw->bus.lan_id), 4159 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, &link_s1); 4160 1.7.2.2 jdolecek 4161 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS || 4162 1.7.2.2 jdolecek (link_s1 & IXGBE_KRM_LINK_S1_MAC_AN_COMPLETE) == 0) { 4163 1.7.2.2 jdolecek DEBUGOUT("Auto-Negotiation did not complete\n"); 4164 1.7.2.2 jdolecek status = IXGBE_ERR_FC_NOT_NEGOTIATED; 4165 1.7.2.2 jdolecek goto out; 4166 1.7.2.2 jdolecek } 4167 1.7.2.2 jdolecek 4168 1.7.2.2 jdolecek /* Read the 10g AN autoc and LP ability registers and resolve 4169 1.7.2.2 jdolecek * local flow control settings accordingly 4170 1.7.2.2 jdolecek */ 4171 1.7.2.2 jdolecek status = hw->mac.ops.read_iosf_sb_reg(hw, 4172 1.7.2.2 jdolecek IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), 4173 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl_1); 4174 1.7.2.2 jdolecek 4175 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) { 4176 1.7.2.2 jdolecek DEBUGOUT("Auto-Negotiation did not complete\n"); 4177 1.7.2.2 jdolecek goto out; 4178 1.7.2.2 jdolecek } 4179 1.7.2.2 jdolecek 4180 1.7.2.2 jdolecek status = hw->mac.ops.read_iosf_sb_reg(hw, 4181 1.7.2.2 jdolecek IXGBE_KRM_LP_BASE_PAGE_HIGH(hw->bus.lan_id), 4182 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, &lp_an_page_low); 4183 1.7.2.2 jdolecek 4184 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) { 4185 1.7.2.2 jdolecek DEBUGOUT("Auto-Negotiation did not complete\n"); 4186 1.7.2.2 jdolecek goto out; 4187 1.7.2.2 jdolecek } 4188 1.7.2.2 jdolecek 4189 1.7.2.2 jdolecek status = ixgbe_negotiate_fc(hw, an_cntl_1, lp_an_page_low, 4190 1.7.2.2 jdolecek IXGBE_KRM_AN_CNTL_1_SYM_PAUSE, 4191 1.7.2.2 jdolecek IXGBE_KRM_AN_CNTL_1_ASM_PAUSE, 4192 1.7.2.2 jdolecek IXGBE_KRM_LP_BASE_PAGE_HIGH_SYM_PAUSE, 4193 1.7.2.2 jdolecek IXGBE_KRM_LP_BASE_PAGE_HIGH_ASM_PAUSE); 4194 1.7.2.2 jdolecek 4195 1.7.2.2 jdolecek out: 4196 1.7.2.2 jdolecek if (status == IXGBE_SUCCESS) { 4197 1.7.2.2 jdolecek hw->fc.fc_was_autonegged = TRUE; 4198 1.7.2.2 jdolecek } else { 4199 1.7.2.2 jdolecek hw->fc.fc_was_autonegged = FALSE; 4200 1.7.2.2 jdolecek hw->fc.current_mode = hw->fc.requested_mode; 4201 1.7.2.2 jdolecek } 4202 1.7.2.2 jdolecek } 4203 1.7.2.2 jdolecek 4204 1.7.2.2 jdolecek /** 4205 1.7.2.2 jdolecek * ixgbe_fc_autoneg_fiber_x550em_a - passthrough FC settings 4206 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4207 1.7.2.2 jdolecek * 4208 1.7.2.2 jdolecek **/ 4209 1.7.2.2 jdolecek void ixgbe_fc_autoneg_fiber_x550em_a(struct ixgbe_hw *hw) 4210 1.7.2.2 jdolecek { 4211 1.7.2.2 jdolecek hw->fc.fc_was_autonegged = FALSE; 4212 1.7.2.2 jdolecek hw->fc.current_mode = hw->fc.requested_mode; 4213 1.7.2.2 jdolecek } 4214 1.7.2.2 jdolecek 4215 1.7.2.2 jdolecek /** 4216 1.7.2.2 jdolecek * ixgbe_fc_autoneg_sgmii_x550em_a - Enable flow control IEEE clause 37 4217 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4218 1.7.2.2 jdolecek * 4219 1.7.2.2 jdolecek * Enable flow control according to IEEE clause 37. 4220 1.7.2.2 jdolecek **/ 4221 1.7.2.2 jdolecek void ixgbe_fc_autoneg_sgmii_x550em_a(struct ixgbe_hw *hw) 4222 1.7.2.2 jdolecek { 4223 1.7.2.2 jdolecek s32 status = IXGBE_ERR_FC_NOT_NEGOTIATED; 4224 1.7.2.2 jdolecek u32 info[FW_PHY_ACT_DATA_COUNT] = { 0 }; 4225 1.7.2.2 jdolecek ixgbe_link_speed speed; 4226 1.7.2.2 jdolecek bool link_up; 4227 1.7.2.2 jdolecek 4228 1.7.2.2 jdolecek /* AN should have completed when the cable was plugged in. 4229 1.7.2.2 jdolecek * Look for reasons to bail out. Bail out if: 4230 1.7.2.2 jdolecek * - FC autoneg is disabled, or if 4231 1.7.2.2 jdolecek * - link is not up. 4232 1.7.2.2 jdolecek */ 4233 1.7.2.2 jdolecek if (hw->fc.disable_fc_autoneg) { 4234 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, 4235 1.7.2.2 jdolecek "Flow control autoneg is disabled"); 4236 1.7.2.2 jdolecek goto out; 4237 1.7.2.2 jdolecek } 4238 1.7.2.2 jdolecek 4239 1.7.2.2 jdolecek hw->mac.ops.check_link(hw, &speed, &link_up, FALSE); 4240 1.7.2.2 jdolecek if (!link_up) { 4241 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_SOFTWARE, "The link is down"); 4242 1.7.2.2 jdolecek goto out; 4243 1.7.2.2 jdolecek } 4244 1.7.2.2 jdolecek 4245 1.7.2.2 jdolecek /* Check if auto-negotiation has completed */ 4246 1.7.2.2 jdolecek status = ixgbe_fw_phy_activity(hw, FW_PHY_ACT_GET_LINK_INFO, &info); 4247 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS || 4248 1.7.2.2 jdolecek !(info[0] & FW_PHY_ACT_GET_LINK_INFO_AN_COMPLETE)) { 4249 1.7.2.2 jdolecek DEBUGOUT("Auto-Negotiation did not complete\n"); 4250 1.7.2.2 jdolecek status = IXGBE_ERR_FC_NOT_NEGOTIATED; 4251 1.7.2.2 jdolecek goto out; 4252 1.7.2.2 jdolecek } 4253 1.7.2.2 jdolecek 4254 1.7.2.2 jdolecek /* Negotiate the flow control */ 4255 1.7.2.2 jdolecek status = ixgbe_negotiate_fc(hw, info[0], info[0], 4256 1.7.2.2 jdolecek FW_PHY_ACT_GET_LINK_INFO_FC_RX, 4257 1.7.2.2 jdolecek FW_PHY_ACT_GET_LINK_INFO_FC_TX, 4258 1.7.2.2 jdolecek FW_PHY_ACT_GET_LINK_INFO_LP_FC_RX, 4259 1.7.2.2 jdolecek FW_PHY_ACT_GET_LINK_INFO_LP_FC_TX); 4260 1.7.2.2 jdolecek 4261 1.7.2.2 jdolecek out: 4262 1.7.2.2 jdolecek if (status == IXGBE_SUCCESS) { 4263 1.7.2.2 jdolecek hw->fc.fc_was_autonegged = TRUE; 4264 1.7.2.2 jdolecek } else { 4265 1.7.2.2 jdolecek hw->fc.fc_was_autonegged = FALSE; 4266 1.7.2.2 jdolecek hw->fc.current_mode = hw->fc.requested_mode; 4267 1.7.2.2 jdolecek } 4268 1.7.2.2 jdolecek } 4269 1.7.2.2 jdolecek 4270 1.7.2.2 jdolecek /** 4271 1.7.2.2 jdolecek * ixgbe_setup_fc_backplane_x550em_a - Set up flow control 4272 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4273 1.7.2.2 jdolecek * 4274 1.7.2.2 jdolecek * Called at init time to set up flow control. 4275 1.7.2.2 jdolecek **/ 4276 1.7.2.2 jdolecek s32 ixgbe_setup_fc_backplane_x550em_a(struct ixgbe_hw *hw) 4277 1.7.2.2 jdolecek { 4278 1.7.2.2 jdolecek s32 status = IXGBE_SUCCESS; 4279 1.7.2.2 jdolecek u32 an_cntl = 0; 4280 1.7.2.2 jdolecek 4281 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_setup_fc_backplane_x550em_a"); 4282 1.7.2.2 jdolecek 4283 1.7.2.2 jdolecek /* Validate the requested mode */ 4284 1.7.2.2 jdolecek if (hw->fc.strict_ieee && hw->fc.requested_mode == ixgbe_fc_rx_pause) { 4285 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_UNSUPPORTED, 4286 1.7.2.2 jdolecek "ixgbe_fc_rx_pause not valid in strict IEEE mode\n"); 4287 1.7.2.2 jdolecek return IXGBE_ERR_INVALID_LINK_SETTINGS; 4288 1.7.2.2 jdolecek } 4289 1.7.2.2 jdolecek 4290 1.7.2.2 jdolecek if (hw->fc.requested_mode == ixgbe_fc_default) 4291 1.7.2.2 jdolecek hw->fc.requested_mode = ixgbe_fc_full; 4292 1.7.2.2 jdolecek 4293 1.7.2.2 jdolecek /* Set up the 1G and 10G flow control advertisement registers so the 4294 1.7.2.2 jdolecek * HW will be able to do FC autoneg once the cable is plugged in. If 4295 1.7.2.2 jdolecek * we link at 10G, the 1G advertisement is harmless and vice versa. 4296 1.7.2.2 jdolecek */ 4297 1.7.2.2 jdolecek status = hw->mac.ops.read_iosf_sb_reg(hw, 4298 1.7.2.2 jdolecek IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), 4299 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, &an_cntl); 4300 1.7.2.2 jdolecek 4301 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) { 4302 1.7.2.2 jdolecek DEBUGOUT("Auto-Negotiation did not complete\n"); 4303 1.7.2.2 jdolecek return status; 4304 1.7.2.2 jdolecek } 4305 1.7.2.2 jdolecek 4306 1.7.2.2 jdolecek /* The possible values of fc.requested_mode are: 4307 1.7.2.2 jdolecek * 0: Flow control is completely disabled 4308 1.7.2.2 jdolecek * 1: Rx flow control is enabled (we can receive pause frames, 4309 1.7.2.2 jdolecek * but not send pause frames). 4310 1.7.2.2 jdolecek * 2: Tx flow control is enabled (we can send pause frames but 4311 1.7.2.2 jdolecek * we do not support receiving pause frames). 4312 1.7.2.2 jdolecek * 3: Both Rx and Tx flow control (symmetric) are enabled. 4313 1.7.2.2 jdolecek * other: Invalid. 4314 1.7.2.2 jdolecek */ 4315 1.7.2.2 jdolecek switch (hw->fc.requested_mode) { 4316 1.7.2.2 jdolecek case ixgbe_fc_none: 4317 1.7.2.2 jdolecek /* Flow control completely disabled by software override. */ 4318 1.7.2.2 jdolecek an_cntl &= ~(IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | 4319 1.7.2.2 jdolecek IXGBE_KRM_AN_CNTL_1_ASM_PAUSE); 4320 1.7.2.2 jdolecek break; 4321 1.7.2.2 jdolecek case ixgbe_fc_tx_pause: 4322 1.7.2.2 jdolecek /* Tx Flow control is enabled, and Rx Flow control is 4323 1.7.2.2 jdolecek * disabled by software override. 4324 1.7.2.2 jdolecek */ 4325 1.7.2.2 jdolecek an_cntl |= IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; 4326 1.7.2.2 jdolecek an_cntl &= ~IXGBE_KRM_AN_CNTL_1_SYM_PAUSE; 4327 1.7.2.2 jdolecek break; 4328 1.7.2.2 jdolecek case ixgbe_fc_rx_pause: 4329 1.7.2.2 jdolecek /* Rx Flow control is enabled and Tx Flow control is 4330 1.7.2.2 jdolecek * disabled by software override. Since there really 4331 1.7.2.2 jdolecek * isn't a way to advertise that we are capable of RX 4332 1.7.2.2 jdolecek * Pause ONLY, we will advertise that we support both 4333 1.7.2.2 jdolecek * symmetric and asymmetric Rx PAUSE, as such we fall 4334 1.7.2.2 jdolecek * through to the fc_full statement. Later, we will 4335 1.7.2.2 jdolecek * disable the adapter's ability to send PAUSE frames. 4336 1.7.2.2 jdolecek */ 4337 1.7.2.2 jdolecek case ixgbe_fc_full: 4338 1.7.2.2 jdolecek /* Flow control (both Rx and Tx) is enabled by SW override. */ 4339 1.7.2.2 jdolecek an_cntl |= IXGBE_KRM_AN_CNTL_1_SYM_PAUSE | 4340 1.7.2.2 jdolecek IXGBE_KRM_AN_CNTL_1_ASM_PAUSE; 4341 1.7.2.2 jdolecek break; 4342 1.7.2.2 jdolecek default: 4343 1.7.2.2 jdolecek ERROR_REPORT1(IXGBE_ERROR_ARGUMENT, 4344 1.7.2.2 jdolecek "Flow control param set incorrectly\n"); 4345 1.7.2.2 jdolecek return IXGBE_ERR_CONFIG; 4346 1.7.2.2 jdolecek } 4347 1.7.2.2 jdolecek 4348 1.7.2.2 jdolecek status = hw->mac.ops.write_iosf_sb_reg(hw, 4349 1.7.2.2 jdolecek IXGBE_KRM_AN_CNTL_1(hw->bus.lan_id), 4350 1.7.2.2 jdolecek IXGBE_SB_IOSF_TARGET_KR_PHY, an_cntl); 4351 1.7.2.2 jdolecek 4352 1.7.2.2 jdolecek /* Restart auto-negotiation. */ 4353 1.7.2.2 jdolecek status = ixgbe_restart_an_internal_phy_x550em(hw); 4354 1.7.2.2 jdolecek 4355 1.7.2.2 jdolecek return status; 4356 1.7.2.2 jdolecek } 4357 1.7.2.2 jdolecek 4358 1.7.2.2 jdolecek /** 4359 1.7.2.2 jdolecek * ixgbe_set_mux - Set mux for port 1 access with CS4227 4360 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4361 1.7.2.2 jdolecek * @state: set mux if 1, clear if 0 4362 1.7.2.2 jdolecek */ 4363 1.7.2.2 jdolecek static void ixgbe_set_mux(struct ixgbe_hw *hw, u8 state) 4364 1.7.2.2 jdolecek { 4365 1.7.2.2 jdolecek u32 esdp; 4366 1.7.2.2 jdolecek 4367 1.7.2.2 jdolecek if (!hw->bus.lan_id) 4368 1.7.2.2 jdolecek return; 4369 1.7.2.2 jdolecek esdp = IXGBE_READ_REG(hw, IXGBE_ESDP); 4370 1.7.2.2 jdolecek if (state) 4371 1.7.2.2 jdolecek esdp |= IXGBE_ESDP_SDP1; 4372 1.7.2.2 jdolecek else 4373 1.7.2.2 jdolecek esdp &= ~IXGBE_ESDP_SDP1; 4374 1.7.2.2 jdolecek IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp); 4375 1.7.2.2 jdolecek IXGBE_WRITE_FLUSH(hw); 4376 1.7.2.2 jdolecek } 4377 1.7.2.2 jdolecek 4378 1.7.2.2 jdolecek /** 4379 1.7.2.2 jdolecek * ixgbe_acquire_swfw_sync_X550em - Acquire SWFW semaphore 4380 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4381 1.7.2.2 jdolecek * @mask: Mask to specify which semaphore to acquire 4382 1.7.2.2 jdolecek * 4383 1.7.2.2 jdolecek * Acquires the SWFW semaphore and sets the I2C MUX 4384 1.7.2.2 jdolecek **/ 4385 1.7.2.2 jdolecek s32 ixgbe_acquire_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) 4386 1.7.2.2 jdolecek { 4387 1.7.2.2 jdolecek s32 status; 4388 1.7.2.2 jdolecek 4389 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_acquire_swfw_sync_X550em"); 4390 1.7.2.2 jdolecek 4391 1.7.2.2 jdolecek status = ixgbe_acquire_swfw_sync_X540(hw, mask); 4392 1.7.2.2 jdolecek if (status) 4393 1.7.2.2 jdolecek return status; 4394 1.7.2.2 jdolecek 4395 1.7.2.2 jdolecek if (mask & IXGBE_GSSR_I2C_MASK) 4396 1.7.2.2 jdolecek ixgbe_set_mux(hw, 1); 4397 1.7.2.2 jdolecek 4398 1.7.2.2 jdolecek return IXGBE_SUCCESS; 4399 1.7.2.2 jdolecek } 4400 1.7.2.2 jdolecek 4401 1.7.2.2 jdolecek /** 4402 1.7.2.2 jdolecek * ixgbe_release_swfw_sync_X550em - Release SWFW semaphore 4403 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4404 1.7.2.2 jdolecek * @mask: Mask to specify which semaphore to release 4405 1.7.2.2 jdolecek * 4406 1.7.2.2 jdolecek * Releases the SWFW semaphore and sets the I2C MUX 4407 1.7.2.2 jdolecek **/ 4408 1.7.2.2 jdolecek void ixgbe_release_swfw_sync_X550em(struct ixgbe_hw *hw, u32 mask) 4409 1.7.2.2 jdolecek { 4410 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_release_swfw_sync_X550em"); 4411 1.7.2.2 jdolecek 4412 1.7.2.2 jdolecek if (mask & IXGBE_GSSR_I2C_MASK) 4413 1.7.2.2 jdolecek ixgbe_set_mux(hw, 0); 4414 1.7.2.2 jdolecek 4415 1.7.2.2 jdolecek ixgbe_release_swfw_sync_X540(hw, mask); 4416 1.7.2.2 jdolecek } 4417 1.7.2.2 jdolecek 4418 1.7.2.2 jdolecek /** 4419 1.7.2.2 jdolecek * ixgbe_acquire_swfw_sync_X550a - Acquire SWFW semaphore 4420 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4421 1.7.2.2 jdolecek * @mask: Mask to specify which semaphore to acquire 4422 1.7.2.2 jdolecek * 4423 1.7.2.2 jdolecek * Acquires the SWFW semaphore and get the shared phy token as needed 4424 1.7.2.2 jdolecek */ 4425 1.7.2.2 jdolecek static s32 ixgbe_acquire_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask) 4426 1.7.2.2 jdolecek { 4427 1.7.2.2 jdolecek u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM; 4428 1.7.2.2 jdolecek int retries = FW_PHY_TOKEN_RETRIES; 4429 1.7.2.2 jdolecek s32 status = IXGBE_SUCCESS; 4430 1.7.2.2 jdolecek 4431 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_acquire_swfw_sync_X550a"); 4432 1.7.2.2 jdolecek 4433 1.7.2.2 jdolecek while (--retries) { 4434 1.7.2.2 jdolecek status = IXGBE_SUCCESS; 4435 1.7.2.2 jdolecek if (hmask) 4436 1.7.2.2 jdolecek status = ixgbe_acquire_swfw_sync_X540(hw, hmask); 4437 1.7.2.2 jdolecek if (status) { 4438 1.7.2.2 jdolecek DEBUGOUT1("Could not acquire SWFW semaphore, Status = %d\n", 4439 1.7.2.2 jdolecek status); 4440 1.7.2.2 jdolecek return status; 4441 1.7.2.2 jdolecek } 4442 1.7.2.2 jdolecek if (!(mask & IXGBE_GSSR_TOKEN_SM)) 4443 1.7.2.2 jdolecek return IXGBE_SUCCESS; 4444 1.7.2.2 jdolecek 4445 1.7.2.2 jdolecek status = ixgbe_get_phy_token(hw); 4446 1.7.2.2 jdolecek if (status == IXGBE_ERR_TOKEN_RETRY) 4447 1.7.2.2 jdolecek DEBUGOUT1("Could not acquire PHY token, Status = %d\n", 4448 1.7.2.2 jdolecek status); 4449 1.7.2.2 jdolecek 4450 1.7.2.2 jdolecek if (status == IXGBE_SUCCESS) 4451 1.7.2.2 jdolecek return IXGBE_SUCCESS; 4452 1.7.2.2 jdolecek 4453 1.7.2.2 jdolecek if (hmask) 4454 1.7.2.2 jdolecek ixgbe_release_swfw_sync_X540(hw, hmask); 4455 1.7.2.2 jdolecek 4456 1.7.2.2 jdolecek if (status != IXGBE_ERR_TOKEN_RETRY) { 4457 1.7.2.2 jdolecek DEBUGOUT1("Unable to retry acquiring the PHY token, Status = %d\n", 4458 1.7.2.2 jdolecek status); 4459 1.7.2.2 jdolecek return status; 4460 1.7.2.2 jdolecek } 4461 1.7.2.2 jdolecek } 4462 1.7.2.2 jdolecek 4463 1.7.2.2 jdolecek DEBUGOUT1("Semaphore acquisition retries failed!: PHY ID = 0x%08X\n", 4464 1.7.2.2 jdolecek hw->phy.id); 4465 1.7.2.2 jdolecek return status; 4466 1.7.2.2 jdolecek } 4467 1.7.2.2 jdolecek 4468 1.7.2.2 jdolecek /** 4469 1.7.2.2 jdolecek * ixgbe_release_swfw_sync_X550a - Release SWFW semaphore 4470 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4471 1.7.2.2 jdolecek * @mask: Mask to specify which semaphore to release 4472 1.7.2.2 jdolecek * 4473 1.7.2.2 jdolecek * Releases the SWFW semaphore and puts the shared phy token as needed 4474 1.7.2.2 jdolecek */ 4475 1.7.2.2 jdolecek static void ixgbe_release_swfw_sync_X550a(struct ixgbe_hw *hw, u32 mask) 4476 1.7.2.2 jdolecek { 4477 1.7.2.2 jdolecek u32 hmask = mask & ~IXGBE_GSSR_TOKEN_SM; 4478 1.7.2.2 jdolecek 4479 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_release_swfw_sync_X550a"); 4480 1.7.2.2 jdolecek 4481 1.7.2.2 jdolecek if (mask & IXGBE_GSSR_TOKEN_SM) 4482 1.7.2.2 jdolecek ixgbe_put_phy_token(hw); 4483 1.7.2.2 jdolecek 4484 1.7.2.2 jdolecek if (hmask) 4485 1.7.2.2 jdolecek ixgbe_release_swfw_sync_X540(hw, hmask); 4486 1.7.2.2 jdolecek } 4487 1.7.2.2 jdolecek 4488 1.7.2.2 jdolecek /** 4489 1.7.2.2 jdolecek * ixgbe_read_phy_reg_x550a - Reads specified PHY register 4490 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4491 1.7.2.2 jdolecek * @reg_addr: 32 bit address of PHY register to read 4492 1.7.2.2 jdolecek * @phy_data: Pointer to read data from PHY register 4493 1.7.2.2 jdolecek * 4494 1.7.2.2 jdolecek * Reads a value from a specified PHY register using the SWFW lock and PHY 4495 1.7.2.2 jdolecek * Token. The PHY Token is needed since the MDIO is shared between to MAC 4496 1.7.2.2 jdolecek * instances. 4497 1.7.2.2 jdolecek **/ 4498 1.7.2.2 jdolecek s32 ixgbe_read_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, 4499 1.7.2.2 jdolecek u32 device_type, u16 *phy_data) 4500 1.7.2.2 jdolecek { 4501 1.7.2.2 jdolecek s32 status; 4502 1.7.2.2 jdolecek u32 mask = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM; 4503 1.7.2.2 jdolecek 4504 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_read_phy_reg_x550a"); 4505 1.7.2.2 jdolecek 4506 1.7.2.2 jdolecek if (hw->mac.ops.acquire_swfw_sync(hw, mask)) 4507 1.7.2.2 jdolecek return IXGBE_ERR_SWFW_SYNC; 4508 1.7.2.2 jdolecek 4509 1.7.2.2 jdolecek status = hw->phy.ops.read_reg_mdi(hw, reg_addr, device_type, phy_data); 4510 1.7.2.2 jdolecek 4511 1.7.2.2 jdolecek hw->mac.ops.release_swfw_sync(hw, mask); 4512 1.7.2.2 jdolecek 4513 1.7.2.2 jdolecek return status; 4514 1.7.2.2 jdolecek } 4515 1.7.2.2 jdolecek 4516 1.7.2.2 jdolecek /** 4517 1.7.2.2 jdolecek * ixgbe_write_phy_reg_x550a - Writes specified PHY register 4518 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4519 1.7.2.2 jdolecek * @reg_addr: 32 bit PHY register to write 4520 1.7.2.2 jdolecek * @device_type: 5 bit device type 4521 1.7.2.2 jdolecek * @phy_data: Data to write to the PHY register 4522 1.7.2.2 jdolecek * 4523 1.7.2.2 jdolecek * Writes a value to specified PHY register using the SWFW lock and PHY Token. 4524 1.7.2.2 jdolecek * The PHY Token is needed since the MDIO is shared between to MAC instances. 4525 1.7.2.2 jdolecek **/ 4526 1.7.2.2 jdolecek s32 ixgbe_write_phy_reg_x550a(struct ixgbe_hw *hw, u32 reg_addr, 4527 1.7.2.2 jdolecek u32 device_type, u16 phy_data) 4528 1.7.2.2 jdolecek { 4529 1.7.2.2 jdolecek s32 status; 4530 1.7.2.2 jdolecek u32 mask = hw->phy.phy_semaphore_mask | IXGBE_GSSR_TOKEN_SM; 4531 1.7.2.2 jdolecek 4532 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_write_phy_reg_x550a"); 4533 1.7.2.2 jdolecek 4534 1.7.2.2 jdolecek if (hw->mac.ops.acquire_swfw_sync(hw, mask) == IXGBE_SUCCESS) { 4535 1.7.2.2 jdolecek status = hw->phy.ops.write_reg_mdi(hw, reg_addr, device_type, 4536 1.7.2.2 jdolecek phy_data); 4537 1.7.2.2 jdolecek hw->mac.ops.release_swfw_sync(hw, mask); 4538 1.7.2.2 jdolecek } else { 4539 1.7.2.2 jdolecek status = IXGBE_ERR_SWFW_SYNC; 4540 1.7.2.2 jdolecek } 4541 1.7.2.2 jdolecek 4542 1.7.2.2 jdolecek return status; 4543 1.7.2.2 jdolecek } 4544 1.7.2.2 jdolecek 4545 1.7.2.2 jdolecek /** 4546 1.7.2.2 jdolecek * ixgbe_handle_lasi_ext_t_x550em - Handle external Base T PHY interrupt 4547 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4548 1.7.2.2 jdolecek * 4549 1.7.2.2 jdolecek * Handle external Base T PHY interrupt. If high temperature 4550 1.7.2.2 jdolecek * failure alarm then return error, else if link status change 4551 1.7.2.2 jdolecek * then setup internal/external PHY link 4552 1.7.2.2 jdolecek * 4553 1.7.2.2 jdolecek * Return IXGBE_ERR_OVERTEMP if interrupt is high temperature 4554 1.7.2.2 jdolecek * failure alarm, else return PHY access status. 4555 1.7.2.2 jdolecek */ 4556 1.7.2.2 jdolecek s32 ixgbe_handle_lasi_ext_t_x550em(struct ixgbe_hw *hw) 4557 1.7.2.2 jdolecek { 4558 1.7.2.2 jdolecek bool lsc; 4559 1.7.2.2 jdolecek u32 status; 4560 1.7.2.2 jdolecek 4561 1.7.2.2 jdolecek status = ixgbe_get_lasi_ext_t_x550em(hw, &lsc); 4562 1.7.2.2 jdolecek 4563 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 4564 1.7.2.2 jdolecek return status; 4565 1.7.2.2 jdolecek 4566 1.7.2.2 jdolecek if (lsc) 4567 1.7.2.2 jdolecek return ixgbe_setup_internal_phy(hw); 4568 1.7.2.2 jdolecek 4569 1.7.2.2 jdolecek return IXGBE_SUCCESS; 4570 1.7.2.2 jdolecek } 4571 1.7.2.2 jdolecek 4572 1.7.2.2 jdolecek /** 4573 1.7.2.2 jdolecek * ixgbe_setup_mac_link_t_X550em - Sets the auto advertised link speed 4574 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4575 1.7.2.2 jdolecek * @speed: new link speed 4576 1.7.2.2 jdolecek * @autoneg_wait_to_complete: TRUE when waiting for completion is needed 4577 1.7.2.2 jdolecek * 4578 1.7.2.2 jdolecek * Setup internal/external PHY link speed based on link speed, then set 4579 1.7.2.2 jdolecek * external PHY auto advertised link speed. 4580 1.7.2.2 jdolecek * 4581 1.7.2.2 jdolecek * Returns error status for any failure 4582 1.7.2.2 jdolecek **/ 4583 1.7.2.2 jdolecek s32 ixgbe_setup_mac_link_t_X550em(struct ixgbe_hw *hw, 4584 1.7.2.2 jdolecek ixgbe_link_speed speed, 4585 1.7.2.2 jdolecek bool autoneg_wait_to_complete) 4586 1.7.2.2 jdolecek { 4587 1.7.2.2 jdolecek s32 status; 4588 1.7.2.2 jdolecek ixgbe_link_speed force_speed; 4589 1.7.2.2 jdolecek 4590 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_setup_mac_link_t_X550em"); 4591 1.7.2.2 jdolecek 4592 1.7.2.2 jdolecek /* Setup internal/external PHY link speed to iXFI (10G), unless 4593 1.7.2.2 jdolecek * only 1G is auto advertised then setup KX link. 4594 1.7.2.2 jdolecek */ 4595 1.7.2.2 jdolecek if (speed & IXGBE_LINK_SPEED_10GB_FULL) 4596 1.7.2.2 jdolecek force_speed = IXGBE_LINK_SPEED_10GB_FULL; 4597 1.7.2.2 jdolecek else 4598 1.7.2.2 jdolecek force_speed = IXGBE_LINK_SPEED_1GB_FULL; 4599 1.7.2.2 jdolecek 4600 1.7.2.2 jdolecek /* If X552 and internal link mode is XFI, then setup XFI internal link. 4601 1.7.2.2 jdolecek */ 4602 1.7.2.2 jdolecek if (hw->mac.type == ixgbe_mac_X550EM_x && 4603 1.7.2.2 jdolecek !(hw->phy.nw_mng_if_sel & IXGBE_NW_MNG_IF_SEL_INT_PHY_MODE)) { 4604 1.7.2.2 jdolecek status = ixgbe_setup_ixfi_x550em(hw, &force_speed); 4605 1.7.2.2 jdolecek 4606 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 4607 1.7.2.2 jdolecek return status; 4608 1.7.2.2 jdolecek } 4609 1.7.2.2 jdolecek 4610 1.7.2.2 jdolecek return hw->phy.ops.setup_link_speed(hw, speed, autoneg_wait_to_complete); 4611 1.7.2.2 jdolecek } 4612 1.7.2.2 jdolecek 4613 1.7.2.2 jdolecek /** 4614 1.7.2.2 jdolecek * ixgbe_check_link_t_X550em - Determine link and speed status 4615 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4616 1.7.2.2 jdolecek * @speed: pointer to link speed 4617 1.7.2.2 jdolecek * @link_up: TRUE when link is up 4618 1.7.2.2 jdolecek * @link_up_wait_to_complete: bool used to wait for link up or not 4619 1.7.2.2 jdolecek * 4620 1.7.2.2 jdolecek * Check that both the MAC and X557 external PHY have link. 4621 1.7.2.2 jdolecek **/ 4622 1.7.2.2 jdolecek s32 ixgbe_check_link_t_X550em(struct ixgbe_hw *hw, ixgbe_link_speed *speed, 4623 1.7.2.2 jdolecek bool *link_up, bool link_up_wait_to_complete) 4624 1.7.2.2 jdolecek { 4625 1.7.2.2 jdolecek u32 status; 4626 1.7.2.2 jdolecek u16 i, autoneg_status = 0; 4627 1.7.2.2 jdolecek 4628 1.7.2.2 jdolecek if (hw->mac.ops.get_media_type(hw) != ixgbe_media_type_copper) 4629 1.7.2.2 jdolecek return IXGBE_ERR_CONFIG; 4630 1.7.2.2 jdolecek 4631 1.7.2.2 jdolecek status = ixgbe_check_mac_link_generic(hw, speed, link_up, 4632 1.7.2.2 jdolecek link_up_wait_to_complete); 4633 1.7.2.2 jdolecek 4634 1.7.2.2 jdolecek /* If check link fails or MAC link is not up, then return */ 4635 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS || !(*link_up)) 4636 1.7.2.2 jdolecek return status; 4637 1.7.2.2 jdolecek 4638 1.7.2.2 jdolecek /* MAC link is up, so check external PHY link. 4639 1.7.2.2 jdolecek * X557 PHY. Link status is latching low, and can only be used to detect 4640 1.7.2.2 jdolecek * link drop, and not the current status of the link without performing 4641 1.7.2.2 jdolecek * back-to-back reads. 4642 1.7.2.2 jdolecek */ 4643 1.7.2.2 jdolecek for (i = 0; i < 2; i++) { 4644 1.7.2.2 jdolecek status = hw->phy.ops.read_reg(hw, IXGBE_MDIO_AUTO_NEG_STATUS, 4645 1.7.2.2 jdolecek IXGBE_MDIO_AUTO_NEG_DEV_TYPE, 4646 1.7.2.2 jdolecek &autoneg_status); 4647 1.7.2.2 jdolecek 4648 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 4649 1.7.2.2 jdolecek return status; 4650 1.7.2.2 jdolecek } 4651 1.7.2.2 jdolecek 4652 1.7.2.2 jdolecek /* If external PHY link is not up, then indicate link not up */ 4653 1.7.2.2 jdolecek if (!(autoneg_status & IXGBE_MDIO_AUTO_NEG_LINK_STATUS)) 4654 1.7.2.2 jdolecek *link_up = FALSE; 4655 1.7.2.2 jdolecek 4656 1.7.2.2 jdolecek return IXGBE_SUCCESS; 4657 1.7.2.2 jdolecek } 4658 1.7.2.2 jdolecek 4659 1.7.2.2 jdolecek /** 4660 1.7.2.2 jdolecek * ixgbe_reset_phy_t_X550em - Performs X557 PHY reset and enables LASI 4661 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4662 1.7.2.2 jdolecek **/ 4663 1.7.2.2 jdolecek s32 ixgbe_reset_phy_t_X550em(struct ixgbe_hw *hw) 4664 1.7.2.2 jdolecek { 4665 1.7.2.2 jdolecek s32 status; 4666 1.7.2.2 jdolecek 4667 1.7.2.2 jdolecek status = ixgbe_reset_phy_generic(hw); 4668 1.7.2.2 jdolecek 4669 1.7.2.2 jdolecek if (status != IXGBE_SUCCESS) 4670 1.7.2.2 jdolecek return status; 4671 1.7.2.2 jdolecek 4672 1.7.2.2 jdolecek /* Configure Link Status Alarm and Temperature Threshold interrupts */ 4673 1.7.2.2 jdolecek return ixgbe_enable_lasi_ext_t_x550em(hw); 4674 1.7.2.2 jdolecek } 4675 1.7.2.2 jdolecek 4676 1.7.2.2 jdolecek /** 4677 1.7.2.2 jdolecek * ixgbe_led_on_t_X550em - Turns on the software controllable LEDs. 4678 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4679 1.7.2.2 jdolecek * @led_idx: led number to turn on 4680 1.7.2.2 jdolecek **/ 4681 1.7.2.2 jdolecek s32 ixgbe_led_on_t_X550em(struct ixgbe_hw *hw, u32 led_idx) 4682 1.7.2.2 jdolecek { 4683 1.7.2.2 jdolecek u16 phy_data; 4684 1.7.2.2 jdolecek 4685 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_led_on_t_X550em"); 4686 1.7.2.2 jdolecek 4687 1.7.2.2 jdolecek if (led_idx >= IXGBE_X557_MAX_LED_INDEX) 4688 1.7.2.2 jdolecek return IXGBE_ERR_PARAM; 4689 1.7.2.2 jdolecek 4690 1.7.2.2 jdolecek /* To turn on the LED, set mode to ON. */ 4691 1.7.2.2 jdolecek ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, 4692 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data); 4693 1.7.2.2 jdolecek phy_data |= IXGBE_X557_LED_MANUAL_SET_MASK; 4694 1.7.2.2 jdolecek ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, 4695 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data); 4696 1.7.2.2 jdolecek 4697 1.7.2.2 jdolecek /* Some designs have the LEDs wired to the MAC */ 4698 1.7.2.2 jdolecek return ixgbe_led_on_generic(hw, led_idx); 4699 1.7.2.2 jdolecek } 4700 1.7.2.2 jdolecek 4701 1.7.2.2 jdolecek /** 4702 1.7.2.2 jdolecek * ixgbe_led_off_t_X550em - Turns off the software controllable LEDs. 4703 1.7.2.2 jdolecek * @hw: pointer to hardware structure 4704 1.7.2.2 jdolecek * @led_idx: led number to turn off 4705 1.7.2.2 jdolecek **/ 4706 1.7.2.2 jdolecek s32 ixgbe_led_off_t_X550em(struct ixgbe_hw *hw, u32 led_idx) 4707 1.7.2.2 jdolecek { 4708 1.7.2.2 jdolecek u16 phy_data; 4709 1.7.2.2 jdolecek 4710 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_led_off_t_X550em"); 4711 1.7.2.2 jdolecek 4712 1.7.2.2 jdolecek if (led_idx >= IXGBE_X557_MAX_LED_INDEX) 4713 1.7.2.2 jdolecek return IXGBE_ERR_PARAM; 4714 1.7.2.2 jdolecek 4715 1.7.2.2 jdolecek /* To turn on the LED, set mode to ON. */ 4716 1.7.2.2 jdolecek ixgbe_read_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, 4717 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, &phy_data); 4718 1.7.2.2 jdolecek phy_data &= ~IXGBE_X557_LED_MANUAL_SET_MASK; 4719 1.7.2.2 jdolecek ixgbe_write_phy_reg(hw, IXGBE_X557_LED_PROVISIONING + led_idx, 4720 1.7.2.2 jdolecek IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, phy_data); 4721 1.7.2.2 jdolecek 4722 1.7.2.2 jdolecek /* Some designs have the LEDs wired to the MAC */ 4723 1.7.2.2 jdolecek return ixgbe_led_off_generic(hw, led_idx); 4724 1.7.2.2 jdolecek } 4725 1.7.2.2 jdolecek 4726 1.7.2.2 jdolecek /** 4727 1.7.2.2 jdolecek * ixgbe_set_fw_drv_ver_x550 - Sends driver version to firmware 4728 1.7.2.2 jdolecek * @hw: pointer to the HW structure 4729 1.7.2.2 jdolecek * @maj: driver version major number 4730 1.7.2.2 jdolecek * @min: driver version minor number 4731 1.7.2.2 jdolecek * @build: driver version build number 4732 1.7.2.2 jdolecek * @sub: driver version sub build number 4733 1.7.2.2 jdolecek * @len: length of driver_ver string 4734 1.7.2.2 jdolecek * @driver_ver: driver string 4735 1.7.2.2 jdolecek * 4736 1.7.2.2 jdolecek * Sends driver version number to firmware through the manageability 4737 1.7.2.2 jdolecek * block. On success return IXGBE_SUCCESS 4738 1.7.2.2 jdolecek * else returns IXGBE_ERR_SWFW_SYNC when encountering an error acquiring 4739 1.7.2.2 jdolecek * semaphore or IXGBE_ERR_HOST_INTERFACE_COMMAND when command fails. 4740 1.7.2.2 jdolecek **/ 4741 1.7.2.2 jdolecek s32 ixgbe_set_fw_drv_ver_x550(struct ixgbe_hw *hw, u8 maj, u8 min, 4742 1.7.2.2 jdolecek u8 build, u8 sub, u16 len, const char *driver_ver) 4743 1.7.2.2 jdolecek { 4744 1.7.2.2 jdolecek struct ixgbe_hic_drv_info2 fw_cmd; 4745 1.7.2.2 jdolecek s32 ret_val = IXGBE_SUCCESS; 4746 1.7.2.2 jdolecek int i; 4747 1.7.2.2 jdolecek 4748 1.7.2.2 jdolecek DEBUGFUNC("ixgbe_set_fw_drv_ver_x550"); 4749 1.7.2.2 jdolecek 4750 1.7.2.2 jdolecek if ((len == 0) || (driver_ver == NULL) || 4751 1.7.2.2 jdolecek (len > sizeof(fw_cmd.driver_string))) 4752 1.7.2.2 jdolecek return IXGBE_ERR_INVALID_ARGUMENT; 4753 1.7.2.2 jdolecek 4754 1.7.2.2 jdolecek fw_cmd.hdr.cmd = FW_CEM_CMD_DRIVER_INFO; 4755 1.7.2.2 jdolecek fw_cmd.hdr.buf_len = FW_CEM_CMD_DRIVER_INFO_LEN + len; 4756 1.7.2.2 jdolecek fw_cmd.hdr.cmd_or_resp.cmd_resv = FW_CEM_CMD_RESERVED; 4757 1.7.2.2 jdolecek fw_cmd.port_num = (u8)hw->bus.func; 4758 1.7.2.2 jdolecek fw_cmd.ver_maj = maj; 4759 1.7.2.2 jdolecek fw_cmd.ver_min = min; 4760 1.7.2.2 jdolecek fw_cmd.ver_build = build; 4761 1.7.2.2 jdolecek fw_cmd.ver_sub = sub; 4762 1.7.2.2 jdolecek fw_cmd.hdr.checksum = 0; 4763 1.7.2.2 jdolecek memcpy(fw_cmd.driver_string, driver_ver, len); 4764 1.7.2.2 jdolecek fw_cmd.hdr.checksum = ixgbe_calculate_checksum((u8 *)&fw_cmd, 4765 1.7.2.2 jdolecek (FW_CEM_HDR_LEN + fw_cmd.hdr.buf_len)); 4766 1.7.2.2 jdolecek 4767 1.7.2.2 jdolecek for (i = 0; i <= FW_CEM_MAX_RETRIES; i++) { 4768 1.7.2.2 jdolecek ret_val = ixgbe_host_interface_command(hw, (u32 *)&fw_cmd, 4769 1.7.2.2 jdolecek sizeof(fw_cmd), 4770 1.7.2.2 jdolecek IXGBE_HI_COMMAND_TIMEOUT, 4771 1.7.2.2 jdolecek TRUE); 4772 1.7.2.2 jdolecek if (ret_val != IXGBE_SUCCESS) 4773 1.7.2.2 jdolecek continue; 4774 1.7.2.2 jdolecek 4775 1.7.2.2 jdolecek if (fw_cmd.hdr.cmd_or_resp.ret_status == 4776 1.7.2.2 jdolecek FW_CEM_RESP_STATUS_SUCCESS) 4777 1.7.2.2 jdolecek ret_val = IXGBE_SUCCESS; 4778 1.7.2.2 jdolecek else 4779 1.7.2.2 jdolecek ret_val = IXGBE_ERR_HOST_INTERFACE_COMMAND; 4780 1.7.2.2 jdolecek 4781 1.7.2.2 jdolecek break; 4782 1.7.2.2 jdolecek } 4783 1.7.2.2 jdolecek 4784 1.7.2.2 jdolecek return ret_val; 4785 1.7.2.2 jdolecek } 4786
Indexes created Sat Oct 25 16:10:12 GMT 2025