| History log of /src/sys/dev/pci/ixgbe/ixgbe_x550.c |
| Revision | | Date | Author | Comments |
| 1.28 |
| 06-Oct-2023 |
msaitoh | ixgbe: Cleanup. No fucntional change.
Remove unused code, fix whitespace and modify comment to reduce against
FreeBSD(mainly from ix-3.3.35).
|
| 1.27 |
| 06-Oct-2023 |
msaitoh | ixgbe: Rename some definitions, modify comment. No functional change.
Apply changes from FreeBSD's ix-3.3.31 and ixv-1.5.32.
- struct adapter *adapter -> struct ixgbe_softc *sc
- master -> primary
- black -> block
|
| 1.26 |
| 31-May-2022 |
andvar | branches: 1.26.4;
s/disbale/disable/ and s/enbale/enable/ in comments. also one more typo fix.
|
| 1.25 |
| 24-Dec-2021 |
msaitoh | Update copyright to 2020.
FreeBSD: 8455e365f77f5b66ac9521dbcd690f79345ce147
|
| 1.24 |
| 15-Dec-2021 |
msaitoh | Check host interface return status. No functional change on NetBSD.
- FreeBSD: c1a56b6f5ffd6f3180a654d058c1783ccb808e8b or ix-3.3.18
DPDK: db18e37090a3b9af47d6a6886248520f6b220bf9
Writing to read-only fields returns a non-OK Return Status
for shadow RAM write command for X550.
This information was previously discarded.
- No functional change on NetBSD because our ixg has no interface to
write the NVM.
|
| 1.23 |
| 10-Dec-2021 |
msaitoh | Whitespace fix. Sync with FreeBSD ix-3.3.14.
|
| 1.22 |
| 10-Dec-2021 |
msaitoh | Add typecast for type mismatch.
FreeBSD: 994dd6328c66fc277438ad51ed074f3c52096147
DPDK: d8e52b2cf771c31b523b46852fd86225b5a2c721
|
| 1.21 |
| 10-Dec-2021 |
msaitoh | Initialize data field in struct buffer.
FreeBSD: b3ebe337ffa06b0f1f460bf8f1e42fb55db77d0b or ix-3.3.14
DPDK: 40543be5376ca415b2a7e196315d0555725b8bdf
While sending request using ixgbe_hic_unlocked() the data field in
buffer struct is not used. It is set when the struct is overwritten by
FW to deliver the response. To not pass random data to FW the whole
structure should be zeroed before use.
|
| 1.20 |
| 19-May-2021 |
msaitoh | No functional change:
- Add NetBSD RCS IDs.
- KNF.
|
| 1.19 |
| 30-Apr-2021 |
msaitoh | branches: 1.19.2;
Add missing __KERNEL_RCSID().
|
| 1.18 |
| 05-Feb-2020 |
msaitoh | branches: 1.18.10;
No functional change:
- Fix typos.
- Remove extra newline.
|
| 1.17 |
| 23-Dec-2019 |
msaitoh | branches: 1.17.2;
Add recovery code for unsupported SFP+.
Before this commit:
If an unsuppored SFP module is inserted before booting, the driver attach
failed and there was no way to recover form it without rebooting or
detaching/reattaching drvier (drvctl -d && drvctl -r pciN).
After this commit:
We can automatically recover any time by replacing it with a supported
module.
|
| 1.16 |
| 06-Aug-2019 |
msaitoh | Fix typo in comment. Found by Wataru Ashihara.
|
| 1.15 |
| 27-Jun-2019 |
msaitoh | branches: 1.15.2;
Sync with FreeBSD ix-3.3.8 part 2:
- Add missing XFI support into ixgbe_get_link_capabilities_X550em().
|
| 1.14 |
| 06-Dec-2018 |
msaitoh | Apply FreeBSD ix-3.3.6.tar.gz's change to NetBSD. Tested on C3000 and X550-T1,
but not tested on Xeon D:
- Add firmware recovery mode for X550, X550A(Xeon D) and X550EM (C3000):
- FreeBSD always set IXGBE_FEATURE_RECOVERY_MODE without checking the
NVM image version. We compare it against 2.0 to not to make new callout and
not to call extra atomic operations.
- In some FreeBSD's sysctl functions, atomic_load_acq_int() is called
before a null pointer check. We call it after null pointer check.
- Before calling atomic_load_acq_uint(), check adapter->feat_en flags
to save atomic operation call.
- We don't check recovery_mode in ixgbe_set_sysctl_value() because this
function doesn't touch any hardware register.
- NetBSD don't have FreeBSD's atomic_load_acq_int()-like function, so do it
with membar_sync(). Thanks riastradh@ for the advice.
- FreeBSD's ix-3.3.6 changed ixgbe_enable_aim from TRUE to FALSE, but we will
keep it as TRUE because we have already fixed some bugs.
- Remove IXGBE_DEV_ID_82599_LS(0x154f) support again. I don't know why. This
was added in ix-3.2.18.tar.gz(NetBSD: ixgbe_82599.c rev. 1.20) and removed in
ix-3.3.6.tar.gz.
- On X550EMU, use ixgbe_identify_sfp_module_X550em() instead of
ixgbe_identify_module_generic(). ixgbe_identify_sfp_module_X550em() has
extra check (e.g. exclude 1G copper).
- if_sriov.c's change doesn't affect to NetBSD because we don't support
SR-IOV PF function.
|
| 1.13 |
| 06-Jul-2018 |
msaitoh | Add force_10_100_autonego sysctl. The default vaule is 0(false).
This sysctl is only for 550EM_a with PHY firmware for a while.
|
| 1.12 |
| 04-Apr-2018 |
msaitoh | branches: 1.12.2;
Sync with FreeBSD r331224 except ixv_if_update_admin_status()'s change:
- Fix length of reading buffer when the command is Read Flash in
ixgbe_host_interface_command().
- Add missing start_hw() call in ixv_init_locked(). This is not a real bug
because start_hw just set hw->adapter_stopped to false and anyone refer it.
- Style change.
- Update comment.
|
| 1.11 |
| 04-Apr-2018 |
msaitoh | Fix a bug that "ifconfig ixgN down up" forgot IFM_NONE setting.
- Don't assume autoneg == 0 is the first call of ixgbe_config_link().
Check ifm_media, too.
- Don't override autoneg_advertised in ixgbe_get_phy_id_fw() to not to
be inconsistent with if_media value.
|
| 1.10 |
| 30-Mar-2018 |
msaitoh | - Add missing IFM_NONE support. If a interface support linkdown,
"ifconfig ixgN media none" drpos link. Not all interface can do link down.
Tested:
82598 AT2 (T)
92599 SF+(SFI) (X520-DA2)
X540
X550-T1
X550EM_x (X10SDV-8C-TLN4F)
X550EM_a (A2SDi-H-TP4F port 0, 1 (T))
Doesn't work:
X550EM_a (A2SDi-H-TP4F port 2, 3 (SFP+ (KR)))
X550EM_a (MA10-ST0 port 2, 3 (SFP+ (SFI)))
(Denverton SFP+ can't force link down because SFP+'s TX_DISABLE pin is
pull down. Is there a way to shutdown SFP+ cage's power?)
Not tested:
82598 fiber.
- Change some functions static.
|
| 1.9 |
| 16-Mar-2018 |
msaitoh | - Check offset correctly in ixgbe_get_oem_prod_version(). Note that this
function is not used.
- Set PHY correctly in ixgbe_setup_mac_link_sfp_x550a() if a device is a
C3000 KR SFP+.
|
| 1.8 |
| 15-Mar-2018 |
msaitoh | Add some changes from ix-3.2.17.tar.gz and r328265. Not fully synchronized.
Some others (e.g. sfp cage interrupt and bypass adapter stuff) will be merged
later:
- Initialize firmware command buffer correctly in ixgbe_read_ee_hostif_X550()
and ixgbe_read_ee_hostif_buffer_X550(). These functions are used when reading
NVM.
- Fix a bug that ixgbe_mng_present() misunderstand management capability on
X550 and newer on some environment. X550 changed FWSM bit definition.
See X540 document and X550's document and compare them.
- Fix checksum calculation in ixgbe_set_fw_drv_ver_generic(). This function is
not used in NetBSD.
- Add some unused funtions.
- Whitespace fix.
|
| 1.7 |
| 08-Nov-2017 |
msaitoh | branches: 1.7.2; 1.7.4;
Fix a bug that Denverton which uses firmware don't linkup if the media is
forced to 100baseTX-FDX or 10baseT-FDX. As I wrote in ixgbe_phy.c rev. 1.13,
popular switches and OSes don't use auto-negotiation if the media is forced to
100BASE-TX or 10BASE-T. Do the same thing. But, if we don't set
FW_PHY_ACT_SETUP_LINK_AN in ixgbe_setup_fw_link(), the firmware wrongly set
BMCR register. Two problems are observed:
a) FDX may not be set.
b) BMCR_SPEED1 (bit 6) is always cleard.
+ -------+------+-----------+-----+
|request | BMCR | BMCR spd | BMCR |
| | (HEX)| (in bits)| FDX |
+--------+------+----------+------+
| 10M | 0000 | 10M(00) | 0 |
| 10M | 2100 | 100M(01) | 1 |
| 100M | 0000 | 10M(00) | 0 |
| 100M | 0100 | 10M(00) | 1 |
+--------------------------+------+
To avoid this problem, after sending request to firmware, check BMCR register
and fix the setting if it's required.
Before this change:
+------------------+---------------------------------------------+
| | denverton |
| +---------+--------+---------+----------------+
| | auto | 1G FDX | 100 FDX | 10 FDX |
+---------+--------+---------+--------+---------+----------------+
| | auto | 1G FDX | 1G FDX | 100 FDX | 10FDX/down(NG) |
| +--------+---------+--------+---------+----------------+
| | 1G FDX | 1G FDX | 1G FDX | down | down |
| link +--------+---------+--------+---------+----------------+
| partner |100 FDX | down(*1)| down | down(NG)| down |
| +--------+---------+--------+---------+----------------+
| | 10 FDX | down(*1)| down | down | down(NG) |
+---------+--------+---------+--------+---------+----------------+
(Observed on: NVM Image Version 0.05 ID 0x8, NVM Map version 1.16,
OEM NVM Image version 0.06, ETrackID 8000087c)
After this change:
+------------------+---------------------------------------------+
| | denverton |
| +---------+--------+---------+----------------+
| | auto | 1G FDX | 100 FDX | 10 FDX |
+---------+--------+---------+--------+---------+----------------+
| | auto | 1G FDX | 1G FDX | 100 FDX | 10 FDX |
| +--------+---------+--------+---------+----------------+
| | 1G FDX | 1G FDX | 1G FDX | down | down |
| link +--------+---------+--------+---------+----------------+
| partner |100 FDX | down(*1)| down | 100 FDX | down |
| +--------+---------+--------+---------+----------------+
| | 10 FDX | down(*1)| down | down | 10 FDX |
+---------+--------+---------+--------+---------+----------------+
*1): may be correct because ixg doesn't support half duplex.
|
| 1.6 |
| 30-Aug-2017 |
msaitoh | - Sync with FreeBSD r320688 (and up to r322865):
- Add C3000(Denvertion(-NS)) support.
- Add bypass function support for bypass adapters. Sysctls are provided.
Not tested because I have no any bypass adapter.
- ixv(4): set RSS mapping.
- Change EEE sysctl.
- ixv(4): Add TSOv6.
- ixv(4): Mailbox API 1.2 and more are implemented and comment says it
negotiate with 1.2 but it really does 1.1...
- Remove thermal test sysctl.
- Fix unknown bugs.
- Print driver feature capabilities and enable bits when verbose boot.
|
| 1.5 |
| 19-Jan-2017 |
msaitoh | branches: 1.5.6;
Reduce diff against FreeBSD. No functional change.
|
| 1.4 |
| 27-Dec-2016 |
msaitoh | branches: 1.4.2; 1.4.4;
Fix DEBUGFUNC() output in ixgbe_disable_rx_x550().
|
| 1.3 |
| 05-Dec-2016 |
msaitoh | branches: 1.3.2;
Update ixg(4) and ixv(4) up to FreeBSD r303890:
- Configure ixgbe phy & gbic power.
Setup phy and gbic power as per Linux 4.3.13 driver.
This fixes link not detected on X540-AT2 after booting to Linux which
turns the phy power off on detach. (FreeBSD r295093)
- Fixup DA cable detection routine. (FreeBSD r303032)
- Some minor changes
|
| 1.2 |
| 02-Dec-2016 |
msaitoh | Update ixg(4) and ixv(4) up to FreeBSD r292674:
- Add X552 SFP+ and X550T single port.
- Bug fixes.
|
| 1.1 |
| 01-Dec-2016 |
msaitoh | Add forgotten ixgbe_x550.c and ixgbe_x550.h.
|
| 1.3.2.3 |
| 05-Feb-2017 |
skrll | Sync with HEAD
|
| 1.3.2.2 |
| 05-Dec-2016 |
skrll | Sync with HEAD
|
| 1.3.2.1 |
| 05-Dec-2016 |
skrll | file ixgbe_x550.c was added on branch nick-nhusb on 2016-12-05 10:55:17 +0000
|
| 1.4.4.1 |
| 21-Apr-2017 |
bouyer | Sync with HEAD
|
| 1.4.2.3 |
| 20-Mar-2017 |
pgoyette | Sync with HEAD
|
| 1.4.2.2 |
| 07-Jan-2017 |
pgoyette | Sync with HEAD. (Note that most of these changes are simply $NetBSD$
tag issues.)
|
| 1.4.2.1 |
| 27-Dec-2016 |
pgoyette | file ixgbe_x550.c was added on branch pgoyette-localcount on 2017-01-07 08:56:40 +0000
|
| 1.5.6.14 |
| 18-Oct-2023 |
martin | Pull up the following, requested by msaitoh in ticket #1914:
sys/dev/pci/ixgbe/ix_txrx.c 1.103-1.104
sys/dev/pci/ixgbe/ixgbe.c 1.334-1.338,
1.341-1.344 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.90-1.93
sys/dev/pci/ixgbe/ixgbe_82599.c 1.31-1.32
sys/dev/pci/ixgbe/ixgbe_api.c 1.29
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.5
sys/dev/pci/ixgbe/ixgbe_common.c 1.46-1.47
sys/dev/pci/ixgbe/ixgbe_common.h 1.18
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.14-1.15
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.13
sys/dev/pci/ixgbe/ixgbe_type.h 1.59-1.61
sys/dev/pci/ixgbe/ixgbe_x540.c 1.24
sys/dev/pci/ixgbe/ixgbe_x550.c 1.28
sys/dev/pci/ixgbe/ixv.c 1.187-1.192 via patch
- ixg(4): Add 82599 LS support once again.
- ixg(4): Filter out spurious link up indication more.
- ixg(4): Print DEVICE_CAPS register.
- ixg(4): Fix a bug that the number of queues is unintentionally
limited to a small number or wrong error message may be printed
when two devices' number of MSI-X vectors are different.
- Modify error message of wrong TX/RX descriptor size.
- Enable interrupt after setting IFF_RUNNING.
- Fix a bug that changing hw.ix[gv]X.qY.interrupt_rate would change
all devices all queues default interrupt rate.
- Cleanup the code.
|
| 1.5.6.13 |
| 13-Oct-2023 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #1912):
sys/dev/pci/ixgbe/if_bypass.c 1.10
sys/dev/pci/ixgbe/if_fdir.c 1.6 via patch
sys/dev/pci/ixgbe/if_sriov.c 1.18 via patch
sys/dev/pci/ixgbe/ix_txrx.c 1.102 via patch
sys/dev/pci/ixgbe/ixgbe.c 1.333,1.339 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.89
sys/dev/pci/ixgbe/ixgbe_api.h 1.17
sys/dev/pci/ixgbe/ixgbe_common.h 1.17
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.4
sys/dev/pci/ixgbe/ixgbe_common.c 1.45
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.5
sys/dev/pci/ixgbe/ixgbe_netmap.h 1.3
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.6
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.9
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.6
sys/dev/pci/ixgbe/ixgbe_type.h 1.58
sys/dev/pci/ixgbe/ixgbe_x550.c 1.27
sys/dev/pci/ixgbe/ixv.c 1.186 via patch
ixgbe: Rename some definitions, modify comment. No functional change.
Apply changes from FreeBSD's ix-3.3.31 and ixv-1.5.32.
- struct adapter *adapter -> struct ixgbe_softc *sc
- master -> primary
- black -> block
ixg(4): Whitespace. No functional change.
|
| 1.5.6.12 |
| 03-Jun-2022 |
martin | Pull up the following revisions, requestes by msaitoh in ticket #1746:
sys/dev/pci/ixgbe/ix_txrx.c 1.95
sys/dev/pci/ixgbe/ixgbe.c 1.261,1.263,
1.265-1.268,1.273,
1.275-1.277,1.305,
1.312,
1.316-1.321 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.85 via patch
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.19
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.15-1.16
sys/dev/pci/ixgbe/ixgbe_type.h 1.46-1.47
sys/dev/pci/ixgbe/ixgbe_x550.c 1.26
sys/dev/pci/ixgbe/ixv.c 1.178,1.182 via patch
- Reduce code duplication between ixgbe_msix_admin() and
ixgbe_legacy_irq().
- Add missing code which was not in ixgbe_msix_admin() from
ixgbe_legacy_irq() and vice versa.
- Reorder code.
- Disable/enable the OTHER interrupts correctly.
- Don't return in the middle of ixgbe_msix_admin() when an flow
director reinit failed. NetBSD currently doesn't support flow
director, so this is not a real bug.
- Print ECC, PHY and temp error log using with ratecheck().
- Correctly re-enable queue interrupt in ixgbe_legacy_irq().
- Correctly enter the recovery mode.
- No functional change:
- Add some debug printf()s.
- Don't use "more" flag for simplify.
- Use macro.
- Fix typos in comment.
- KNF.
|
| 1.5.6.11 |
| 30-Jan-2022 |
martin | Pull up the following, requested by msaitoh in ticket #1729:
sys/dev/pci/ixgbe/if_sriov.c 1.12-1.16
sys/dev/pci/ixgbe/ixgbe.c 1.295-1.297,1.300,1.304 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.84
sys/dev/pci/ixgbe/ixgbe_82598.c 1.17-1.18
sys/dev/pci/ixgbe/ixgbe_82598.h 1.9
sys/dev/pci/ixgbe/ixgbe_82599.c 1.24-1.28
sys/dev/pci/ixgbe/ixgbe_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_api.c 1.26-1.27
sys/dev/pci/ixgbe/ixgbe_api.h 1.16
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.3
sys/dev/pci/ixgbe/ixgbe_common.c 1.34-1.42
sys/dev/pci/ixgbe/ixgbe_common.h 1.15-1.16
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.12-1.13
sys/dev/pci/ixgbe/ixgbe_dcb.h 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.10-1.12
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.8
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.4
sys/dev/pci/ixgbe/ixgbe_features.h 1.4
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.13-1.15
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.15-1.18
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.5
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.8
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.31
sys/dev/pci/ixgbe/ixgbe_phy.c 1.25-1.29
sys/dev/pci/ixgbe/ixgbe_phy.h 1.13
sys/dev/pci/ixgbe/ixgbe_rss.h 1.6
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.5
sys/dev/pci/ixgbe/ixgbe_type.h 1.51-1.54
sys/dev/pci/ixgbe/ixgbe_vf.c 1.28-1.29
sys/dev/pci/ixgbe/ixgbe_vf.h 1.15
sys/dev/pci/ixgbe/ixgbe_x540.c 1.20-1.22
sys/dev/pci/ixgbe/ixgbe_x540.h 1.10
sys/dev/pci/ixgbe/ixgbe_x550.c 1.21-1.25
sys/dev/pci/ixgbe/ixgbe_x550.h 1.7
sys/dev/pci/ixgbe/ixv.c 1.170, 1.174-1.175 via patch
- Add typecast for type mismatch.
- Fix retry count calculation of I2C read/write.
- Wait longer for link after fiber MAC setup.
- ixv(4): Use adapter->mta for the multicast array memory instead of
the on-stack array.
- Match X550_PHY_ID correctly on X550.
- Print NVM image version on 82598.
- Use 64bit for lxon + lxoff.
- Don't expose garbage data of hw.ixvN.debug.
- Some NetBSD unrelated changes:
- Fix infinite recursion on PCIe link down if VMDQ is used.
- Move PF mailbox initialization from ixgbe_attach() to
ixgbe_init_iov().
- Add IPv6 mask for flow director.
- Change error level in ixgbe_fc_autoneg().
- Check host interface return status when writing NVM.
- Change DCB credit parameters.
- Restore some mailbox related functions. Revert part of ixgbe_mbx.c
rev. 1.7 and ixgbe_mbx.h rev. 1.11. No functional change.
- Rename IXGBE_VT_MSGTYPE_{ACK,NACK} to
IXGBE_VT_MSGTYPE_{SUCCESS,FAILURE}. No functional change.
- Remove unused argument. Change argument.
- Remove unnecessary return value check.
- Remove debug error message.
- Remove dead code.
- Add some unused macros.
- Fix typo in comment.
- Rename some functions.
- Sort lines, modify comment.
- Whitespace fix.
|
| 1.5.6.10 |
| 15-Sep-2021 |
martin | Pull up the following (all via patch), requested by msaitoh in ticket #1696:
sysdev/pci/ixgbe/ixgbe.c 1.252, 1.280-1.283, 1.286-1.287, 1.289-1.290 via patch
sysdev/pci/ixgbe/ixgbe.h 1.73, 1.76-1.80 via patch
sysdev/pci/ixgbe/ix_txrx.c 1.68-1.93
sysdev/pci/ixgbe/ixv.c 1.153, 1.157-1.161, 1.163-1.166 via patch
sysdev/pci/ixgbe/if_bypass.c 1.7-1.9
sysdev/pci/ixgbe/if_fdir.c 1.4-1.5
sysdev/pci/ixgbe/if_sriov.c 1.10-1.11
sysdev/pci/ixgbe/ixgbe_82598.c 1.16
sysdev/pci/ixgbe/ixgbe_82599.c 1.23
sysdev/pci/ixgbe/ixgbe_api.c 1.25
sysdev/pci/ixgbe/ixgbe_bypass.h 1.2
sysdev/pci/ixgbe/ixgbe_common.c 1.30-1.33
sysdev/pci/ixgbe/ixgbe_dcb.c 1.10-1.11
sysdev/pci/ixgbe/ixgbe_dcb.h 1.7
sysdev/pci/ixgbe/ixgbe_dcb_82598.c 1.8-1.9
sysdev/pci/ixgbe/ixgbe_dcb_82598.h 1.7
sysdev/pci/ixgbe/ixgbe_dcb_82599.c 1.8-1.9
sysdev/pci/ixgbe/ixgbe_dcb_82599.h 1.7
sysdev/pci/ixgbe/ixgbe_fdir.h 1.3
sysdev/pci/ixgbe/ixgbe_features.h 1.3
sysdev/pci/ixgbe/ixgbe_mbx.c 1.12
sysdev/pci/ixgbe/ixgbe_netbsd.c 1.16-1.17
sysdev/pci/ixgbe/ixgbe_netbsd.h 1.13-1.14
sysdev/pci/ixgbe/ixgbe_netmap.c 1.3-1.4
sysdev/pci/ixgbe/ixgbe_netmap.h 1.2
sysdev/pci/ixgbe/ixgbe_osdep.c 1.7
sysdev/pci/ixgbe/ixgbe_osdep.h 1.29-1.30
sysdev/pci/ixgbe/ixgbe_phy.c 1.24
sysdev/pci/ixgbe/ixgbe_rss.h 1.5
sysdev/pci/ixgbe/ixgbe_sriov.h 1.4
sysdev/pci/ixgbe/ixgbe_type.h 1.49
sysdev/pci/ixgbe/ixgbe_vf.c 1.27
sysdev/pci/ixgbe/ixgbe_x540.c 1.18-1.19
sysdev/pci/ixgbe/ixgbe_x540.h 1.9
sysdev/pci/ixgbe/ixgbe_x550.c 1.19-1.20
sysdev/pci/ixgbe/ixgbe_x550.h 1.6
sysdev/pci/files.pci 1.438
share/man/man4/ixg.4 1.15
share/man/man4/ixv.4 1.8
- Use MCLGET() instead of homegrown cluster (jcl) allocation mechanism.
Before this commit, resource shortage was easily occurred because
the total number of the clusters is small.
- Improve performance:
- Use m_adj(ETHER_ALIGN) more.
- Sprinkle __predict_false() in the RX path.
- Don't pre-allocate a cluster for RXCOPY case to improve short
packet's performance.
- Call bus_dmamap_unload(9) via ixgbe_dmamap_unload(), before freeing
DMA buffer. Also, when the buffer is already freed, do not call
bus_dmamap_unload(9) (no resource leaks with this change). This
change is required to make ixg(4) work on alpha.
- Keep m_len and m_pkthdr.len consistent to prevent panic on arm.
- Fix panic when bus_dmamap_load_mbuf() failed in
ixgbe_setup_receive_ring().
- Added BUS_DMA_COHERENT flag to bus_dmamem_map() to improve stability
on aarch64.
- Use uint64_t instead of bus_addr_t for the TX descriptor's buffer
address. At least, this change is required for macppc
(sizeof(bus_addr_t) == 4) to make TX work.
- Fix little-endian dependence.
- Set rxr->next_to_refresh correctly in ixgbe_setup_receive_ring().
- Refresh unrefreshed descriptors' buffers correctly.
- Don't call bus_dmamap_sync with rx_mbuf_sz(== MCLBYTES) to prevent
panic.
- Save the discard_multidesc state to not to forget the state by
exiting rxeof().
- Add missing increment of no_mbuf error counter.
- Don't increment no_mbuf evcnt(9) when discarding multi-descriptor
packet.
- ixv: Modify error message to sync with ixgbe.c
- Print the error value of ixgbe_reset_hw() for debugging.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxr->next_to_check updating.
- Add new sysctl "rx_copy_len".
- Add a new sysctl to read rxr->next_to_refresh.
- Print error number when error occurred.
- Rename ix{gbe,v}_stop() with ix{gbe,v}_stop_locked(). No functional
change.
- Don't use fixed value.
- Comment out flow director processing in fast path.
- Add missing NetBSD RCS IDs and __KERNEL_RCSID()s.
- KNF.
- Fix typos.
|
| 1.5.6.9 |
| 02-Sep-2020 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #1601):
sys/dev/pci/ixgbe/ixgbe_82598.c: revision 1.13
sys/dev/pci/ixgbe/ixgbe.c: revision 1.219
sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.20
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.22
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.44
Add recovery code for unsupported SFP+.
Before this commit:
If an unsupported SFP module is inserted before booting, the driver attach
failed and there was no way to recover form it without rebooting or
detaching/reattaching driver (drvctl -d && drvctl -r pciN).
After this commit:
We can automatically recover any time by replacing it with a supported
module.
|
| 1.5.6.8 |
| 05-Aug-2020 |
martin | Pull up the following revisions, requested by msaitoh in ticket #1587:
sys/dev/pci/ixgbe/ix_txrx.c 1.62-1.63 via patch
sys/dev/pci/ixgbe/ixgbe.c 1.225, 1.228-1.229,
1.232 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.64, 1.66
sys/dev/pci/ixgbe/ixv.c 1.146, 1.148-1.150
via patch
sys/dev/pci/ixgbe/ixgbe_common.c 1.27
sys/dev/pci/ixgbe/ixgbe_vf.c 1.23
sys/dev/pci/ixgbe/ixgbe_82598.c 1.15
sys/dev/pci/ixgbe/ixgbe_x550.c 1.18
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.14
sys/dev/pci/ixgbe/ixgbe_phy.c 1.21
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.26
- Fix IXGBE_LE32_TO_CPUS() macro for big endian machine. This problem
was only on X550.
- Add debug printf()s.
- Use unsigned to avoid undefined behavior in
ixgbe_fc_enable_generic().
- Modify a little to reduce diff between ixgbe.c and ixv.c.
No functional change.
- Modify comment.
- Remove unused macros.
- Whitespace fix.
- Fix typos.
|
| 1.5.6.7 |
| 05-Sep-2019 |
martin | Apply patch, requested by msaitoh in ticket #1367, to pull up the following
revisions:
sys/dev/pci/ixgbe/ixgbe_x550.c 1.16
sys/dev/pci/ixgbe/ixgbe.c 1.180,1.203-1.204,
1.207-1.208 via patch
sys/dev/pci/ixgbe/ix_txrx.c 1.55
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.10
sys/dev/pci/ixgbe/ixgbe_common.c 1.25
sys/dev/pci/ixgbe/ixv.c 1.129-1.130
- X550EM supports QSFP, so check ixgbe_media_type_fiber_qsfp too.
- An interrupt might not arrive when a module is inserted. When an link
status change interrupt occurred and the driver still regard SFP as
unplugged, issue the module softint before issuing LSC softint.
- Add 10000BASE-LX media if it's 1000BASE-BX.
- printf -> device_printf
- Avoid undefined behavior of VLAN filter setting.
- Simplify code.
- Fix typo in unused code.
- Fix typo in comment. Found by Wataru Ashihara.
|
| 1.5.6.6 |
| 22-Jul-2019 |
martin | Pull up the following revisions (via patch), requested by msaitoh in
ticket #1301:
sys/dev/pci/ixgbe/if_sriov.c 1.5-1.6
sys/dev/pci/ixgbe/ix_txrx.c 1.53-1.54
sys/dev/pci/ixgbe/ixgbe_x550.h 1.5
sys/dev/pci/ixgbe/ixgbe.c 1.169-1.170,1.176,1.179,1.181,1.185-1.186,1.188-1.192 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.53,1.55
sys/dev/pci/ixgbe/ixgbe_82599.c 1.21
sys/dev/pci/ixgbe/ixgbe_api.c 1.22-1.23
sys/dev/pci/ixgbe/ixgbe_api.h 1.14-1.15
sys/dev/pci/ixgbe/ixgbe_x550.c 1.14-1.15
sys/dev/pci/ixgbe/ixgbe_common.c 1.23
sys/dev/pci/ixgbe/ixgbe_common.h 1.14
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.11
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.14
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.2
sys/dev/pci/ixgbe/ixgbe_features.h 1.2
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.9
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.9-1.10
sys/dev/pci/ixgbe/ixgbe_phy.c 1.18
sys/dev/pci/ixgbe/ixgbe_type.h 1.37,1.39-1.40
sys/dev/pci/ixgbe/ixgbe_vf.c 1.18
sys/dev/pci/ixgbe/ixv.c 1.112-1.114,1.117,1.119 via patch
Sync ixgbe up to 20190717 except ETHERCAP or ixv's VLAN stuff:
- Add firmware recovery mode for X550, X550A(Xeon D) and X550EM(C3000).
- Remove IXGBE_DEV_ID_82599_LS(0x154f) support again.
- On X550EMU, use ixgbe_identify_sfp_module_X550em() instead of
ixgbe_identify_module_generic(). ixgbe_identify_sfp_module_X550em()
has extra check (e.g. exclude 1G copper).
- It's not required to calculate unused queues' statistics.
- Remove ETHERCAP_VLAN_HWFILTER's definition.
- Match 82598_BX(0x1508), 82599_KR(0x1517), 82599_SFP_EM(0x1507),
X550EM_X_XFI(0x15b0), X550EM_A_QSFP(0x15ca) and
X550EM_A_QSFP_N(0x15cc)
- Add missing XFI support into ixgbe_get_link_capabilities_X550em().
- Other than IXGBE_VF_RESET should wait ACK, so use
ixgbevf_write_msg_read_ack() instead of write_posted() in
ixgbe_update_mc_addr_list_vf().
- When ixv_check_link() failed in the watchdog function, reset the
interface.
- Remove RXCSUM register modification in
ixv_initialize_receive_units(). It seems it's not required.
- Remove some debug printf in ixv_print_debug_info().
- Calculate vector's bit location correctly when the vector >= 31
in ixgbe_allocate_msix().
- Fix hung queue check when the queue number >= 31.
- On ENETRESET case, not continue and quit the ifflags_cb() function
because if_init() will do the same thing.
- Fix bugs in unused code.
- Fix typo in comment.
- Fix typo in unused code.
- Whitespace fixes. KNF.
|
| 1.5.6.5 |
| 07-Aug-2018 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #961):
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.13
sys/dev/pci/ixgbe/ixgbe.h: revision 1.51
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.36
sys/dev/pci/ixgbe/ixgbe_osdep.h: revision 1.23
sys/dev/pci/ixgbe/ixgbe_netbsd.c: revision 1.8
sys/dev/pci/ixgbe/ixgbe.c: revision 1.163
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.49
Add force_10_100_autonego sysctl. The default value is 0(false).
This sysctl is only for 550EM_a with PHY firmware for a while.
Make jcl allocation per queue to reduce mutex spin. Tested by me and
knakahara.
|
| 1.5.6.4 |
| 14-Apr-2018 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #750):
sys/dev/pci/ixgbe/ixgbe_x540.h: revision 1.8
sys/dev/pci/ixgbe/ixgbe_82598.c: revision 1.11
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: revision 1.6
sys/dev/pci/ixgbe/ixgbe_82598.c: revision 1.12
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: revision 1.7
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h: revision 1.6
sys/dev/pci/ixgbe/ixgbe_fdir.h: revision 1.2
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h: revision 1.6
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: revision 1.6
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.18
sys/dev/pci/ixgbe/if_sriov.c: revision 1.3
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: revision 1.7
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.19
sys/dev/pci/ixgbe/ixgbe_mbx.h: revision 1.13
sys/dev/pci/ixgbe/ixgbe_dcb.c: revision 1.7
sys/dev/pci/ixgbe/ixgbe_api.c: revision 1.19
sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.16
sys/dev/pci/ixgbe/ixgbe_dcb.c: revision 1.8
sys/dev/pci/ixgbe/ixgbe_vf.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe_dcb.h: revision 1.6
sys/dev/pci/ixgbe/if_bypass.c: revision 1.4
sys/dev/pci/ixgbe/ixv.c: revision 1.91
sys/dev/pci/ixgbe/ixgbe_rss.h: revision 1.4
sys/dev/pci/ixgbe/ixv.c: revision 1.92
sys/dev/pci/ixgbe/ixv.c: revision 1.93
sys/dev/pci/ixgbe/ixgbe_osdep.c: revision 1.4
sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.12
sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.13
sys/dev/pci/ixgbe/ixgbe_api.h: revision 1.13
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.12
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.33
sys/dev/pci/ixgbe/if_fdir.c: revision 1.2
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.34
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.39
sys/dev/pci/ixgbe/ixgbe_vf.h: revision 1.13
sys/dev/pci/ixgbe/ixgbe_api.c: revision 1.20
sys/dev/pci/ixgbe/ixgbe_sriov.h: revision 1.3
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.21
sys/dev/pci/ixgbe/ixgbe_osdep.h: revision 1.21
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.22
sys/dev/pci/ixgbe/ixgbe_82599.h: revision 1.7
sys/dev/pci/ixgbe/ixgbe.c: revision 1.144
sys/dev/pci/ixgbe/ixgbe.c: revision 1.145
sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.16
sys/dev/pci/ixgbe/ixgbe.c: revision 1.146
sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe_82598.h: revision 1.8
sys/dev/pci/ixgbe/ixgbe.h: revision 1.41
sys/dev/pci/ixgbe/ixgbe_mbx.c: revision 1.10
sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.14
sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.15
sys/dev/pci/ixgbe/ixgbe_phy.h: revision 1.11
Sync with the remaining part of FreeBSD r328265 except sfp_reinit stuff:
- Always schedule module intterrupt in ixgbe_config_link() when a device is
SFP+ based.
- Use not loop index but txr->me in ixv_initialize_{transmit,receive}_units().
It's required for VMDQ but NetBSD doesn't use it, so it's not a bug in
NetBSD.
- Simplify ixgbe_bp_wd_set(). No functional change.
- Whitespace.
Sync with FreeBSD r331224 except ixv_if_update_admin_status()'s change:
- Fix length of reading buffer when the command is Read Flash in
ixgbe_host_interface_command().
- Add missing start_hw() call in ixv_init_locked(). This is not a real bug
because start_hw just set hw->adapter_stopped to false and anyone refer it.
- Style change.
- Update comment.
Read sc_if_flags after taking core lock. Same as if_wm.c rev. 1.418.
|
| 1.5.6.3 |
| 04-Apr-2018 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #690):
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe.c: revision 1.138
sys/dev/pci/ixgbe/ixv.c: revision 1.90
sys/dev/pci/ixgbe/ixgbe.c: revision 1.139
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.19
sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.11
sys/dev/pci/ixgbe/ixgbe.h: revision 1.38
sys/dev/pci/ixgbe/ixgbe_api.h: revision 1.12
sys/dev/pci/ixgbe/ixgbe.h: revision 1.39
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.10
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.11
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.37
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.38
sys/dev/pci/ixgbe/ixgbe.c: revision 1.140
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.20
sys/dev/pci/ixgbe/ixgbe.c: revision 1.141
sys/dev/pci/ixgbe/ixgbe.c: revision 1.142
sys/dev/pci/ixgbe/ixgbe.c: revision 1.143
sys/dev/pci/ixgbe/ixgbe.h: revision 1.40
sys/dev/pci/ixgbe/ixgbe_x550.h: revision 1.4
Fix the problem between eitr and link_speed.
In ixgbe_msix_que(), que->eitr_setting is limited to IXGBE_MIN_RSC_EITR_10G1G
when link_speed is 1Gbps or 10Gbps. However, que->eitr_setting is set to EITR
register in the *next* Tx/Rx interrupt. If link_speed changes from 100Mbps to
1Gbps ro 10Gbps, que->eitr_setting which is not limited can be set to EITR
register, that is, the problem fixed by ixgbe.c:r1.124 can occur in this case.
To fix this case, que->eitr_setting should be clear when link_speed is changed
or link state is changed.
Furthermore, expand the variants used for AIM (txr->bytes, txr->packets,
rxr->bytes and rxr->packets) from u32 to u64 to avoid wraparound which causes
que->eitr_setting calculation mistake.
XXX pullup-8
Don't write EIMC directly. It is required to manage with struct ix_queue status.
XXX pullup-8
- Add missing IFM_NONE support. If a interface support linkdown,
"ifconfig ixgN media none" drpos link. Not all interface can do link down.
Tested:
82598 AT2 (T)
92599 SF+(SFI) (X520-DA2)
X540
X550-T1
X550EM_x (X10SDV-8C-TLN4F)
X550EM_a (A2SDi-H-TP4F port 0, 1 (T))
Doesn't work:
X550EM_a (A2SDi-H-TP4F port 2, 3 (SFP+ (KR)))
X550EM_a (MA10-ST0 port 2, 3 (SFP+ (SFI)))
(Denverton SFP+ can't force link down because SFP+'s TX_DISABLE pin is
pull down. Is there a way to shutdown SFP+ cage's power?)
Not tested:
82598 fiber.
- Change some functions static.
Avoid issues caused by sending old packets at next link-up time.
This modification consists by the following two parts.
- drain packets in if_snd queue or corresponding txr->txr_interq
when link_active == false in ifp->if_start(), ifp->if_transmit(),
and deferred Tx processing
- drain packets in if_snd queue and all of txr->txr_interq's
at link-down time
ok by msaitoh@n.o.
Fix long standing bug that 82598 SFP+ panics in ixgbe_handle_mod() because
hw->mac.ops.setup_sfp is NULL. This change is a part of FreeBSD r327031.
Fix a bug that "ifconfig ixgN down up" forgot IFM_NONE setting.
- Don't assume autoneg == 0 is the first call of ixgbe_config_link().
Check ifm_media, too.
- Don't override autoneg_advertised in ixgbe_get_phy_id_fw() to not to
be inconsistent with if_media value.
|
| 1.5.6.2 |
| 30-Mar-2018 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #673):
sys/dev/pci/ixgbe/if_sriov.c: revision 1.2
sys/dev/pci/ixgbe/ixgbe.c: revision 1.135
sys/dev/pci/ixgbe/ixgbe.c: revision 1.136
sys/dev/pci/ixgbe/ixgbe.c: revision 1.137
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.17
sys/dev/pci/ixgbe/if_bypass.c: revision 1.3
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.18
sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.10
sys/dev/pci/ixgbe/ixgbe.h: revision 1.36
sys/dev/pci/ixgbe/ixgbe_osdep.c: revision 1.3
sys/dev/pci/ixgbe/ixgbe.h: revision 1.37
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.36
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.32
sys/dev/pci/ixgbe/ixgbe_vf.h: revision 1.12
sys/dev/pci/ixgbe/ixgbe_sriov.h: revision 1.2
sys/dev/pci/ixgbe/ixgbe_osdep.h: revision 1.20
sys/dev/pci/ixgbe/ixv.c: revision 1.88
sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.15
sys/dev/pci/ixgbe/ixv.c: revision 1.89
sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.13
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.8
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.9
Add some changes from ix-3.2.17.tar.gz and r328265. Not fully synchronized.
Some others (e.g. sfp cage interrupt and bypass adapter stuff) will be merged
later:
- Initialize firmware command buffer correctly in ixgbe_read_ee_hostif_X550()
and ixgbe_read_ee_hostif_buffer_X550(). These functions are used when reading
NVM.
- Fix a bug that ixgbe_mng_present() misunderstand management capability on
X550 and newer on some environment. X550 changed FWSM bit definition.
See X540 document and X550's document and compare them.
- Fix checksum calculation in ixgbe_set_fw_drv_ver_generic(). This function is
not used in NetBSD.
- Add some unused funtions.
- Whitespace fix.
- Check offset correctly in ixgbe_get_oem_prod_version(). Note that this
function is not used.
- Set PHY correctly in ixgbe_setup_mac_link_sfp_x550a() if a device is a
C3000 KR SFP+.
Fix race about writing adapter->link_active for ixg(4).
adapter->link_active is updated by ixgbe_update_link_status() only.
The function is called from the following four functions.
- ixgbe_media_status()
- ixgbe_local_timer1()
- ixgbe_stop()
- ixgbe_handle_link()
The functions other than ixgbe_handle_link() call ixgbe_update_link_status()
with holding IXGBE_CORE_LOCK, however ixgbe_handle_link() calls it without
holding IXGBE_CORE_LOCK. That can cause race. So, add IXGBE_CORE_LOCK to
ixgbe_handle_link().
Tested by msaitoh@n.o and me.
Fix race about writing adapter->link_active for ixv(4).
adapter->link_active is updated by ixv_update_link_status() only.
The function is called from the following two functions.
- ixv_media_status()
- ixv_handle_link()
ixv_media_status() calls ixv_update_link_status() with holding
IXGBE_CORE_LOCK, however ixv_handle_link() calls it without
holding IXGBE_CORE_LOCK, the same as ixg(4).
ok by msaitoh@n.o.
- Add link related softint's counter.
- Fix indent.
|
| 1.5.6.1 |
| 21-Dec-2017 |
snj | Pull up following revision(s) (requested by msaitoh in ticket #441):
sys/dev/pci/files.pci: 1.390
sys/dev/pci/ixgbe/if_bypass.c: new
sys/dev/pci/ixgbe/if_fdir.c: new
sys/dev/pci/ixgbe/if_sriov.c: new
sys/dev/pci/ixgbe/ixgbe_bypass.h: new
sys/dev/pci/ixgbe/ixgbe_fdir.h: new
sys/dev/pci/ixgbe/ixgbe_features.h: new
sys/dev/pci/ixgbe/ixgbe_netmap.c: new
sys/dev/pci/ixgbe/ixgbe_netmap.h: new
sys/dev/pci/ixgbe/ixgbe_rss.h: new
sys/dev/pci/ixgbe/ixgbe_sriov.h: new
sys/dev/pci/ixgbe/ix_txrx.c: 1.28, 1.30 via patch
sys/dev/pci/ixgbe/ixgbe.c: 1.97-1.105, 1.107-1.111, 1.113-1.115
sys/dev/pci/ixgbe/ixgbe.h: 1.26-1.29 via patch
sys/dev/pci/ixgbe/ixv.c: 1.57-1.58, 1.60-1.61, 1.63-1.64, 1.66-1.72, 1.75 via patch
sys/dev/pci/ixgbe/ixgbe_api.c: 1.17-1.18 via patch
sys/dev/pci/ixgbe/ixgbe_type.h: 1.26-1.30 via patch
sys/dev/pci/ixgbe/ixgbe_82598.c: 1.9-1.10 via patch
sys/dev/pci/ixgbe/ixgbe_82598.h: 1.6-1.7
sys/dev/pci/ixgbe/ixgbe_82599.c: 1.15-1.16 via patch
sys/dev/pci/ixgbe/ixgbe_82599.h: 1.5-1.6
sys/dev/pci/ixgbe/ixgbe_api.h: 1.10-1.11 via patch
sys/dev/pci/ixgbe/ixgbe_common.c: 1.14-1.16 via patch
sys/dev/pci/ixgbe/ixgbe_common.h: 1.8-1.9 via patch
sys/dev/pci/ixgbe/ixgbe_dcb.c: 1.5-1.6
sys/dev/pci/ixgbe/ixgbe_dcb.h: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h: 1.4-1.5
sys/dev/pci/ixgbe/ixgbe_mbx.c: 1.7-1.9 via patch
sys/dev/pci/ixgbe/ixgbe_mbx.h: 1.11-1.12 via patch
sys/dev/pci/ixgbe/ixgbe_osdep.c: 1.2
sys/dev/pci/ixgbe/ixgbe_osdep.h: 1.18-1.19 via patch
sys/dev/pci/ixgbe/ixgbe_phy.c: 1.12-1.14 via patch
sys/dev/pci/ixgbe/ixgbe_phy.h: 1.9-1.10 via patch
sys/dev/pci/ixgbe/ixgbe_vf.c: 1.13-1.15 via patch
sys/dev/pci/ixgbe/ixgbe_vf.h: 1.9-1.11 via patch
sys/dev/pci/ixgbe/ixgbe_x540.c: 1.10-1.12
sys/dev/pci/ixgbe/ixgbe_x540.h: 1.6-1.7
sys/dev/pci/ixgbe/ixgbe_x550.c: 1.6-1.7
sys/dev/pci/ixgbe/ixgbe_x550.h: 1.3
Sync with FreeBSD's up to r326022, fix bugs and some improvements:
- Don't limit number of queue pair to 8. Take chip's max TX queues and
max RX queues into account.
- Add C3000 (Denverton) support.
- Add bypass function support for bypass adapters.
- Change EEE sysctl.
- Remove thermal test sysctl.
- ixv(4): set RSS mapping.
- ixv(4): Add TSOv6.
- ixv(4): Fix hardware counter.
- ixv(4): Make TX/RX descriptors size the same as ixg(4).
- ixv(4): Print device name in ixv_attach().
- ixv(4): Make mailbox statistic counters evcnt(9).
- ixv(4): Fix a problem that mailbox interrupt never occurred.
- ixv(4): Don't check neither VTEICR nor VTEICS same as Linux. It
seems that both registers can't be used to check which MSI-X vector
is triggered.
- ixv(4): Print Mailbox API version.
- Print driver feature capabilities and enable bits when verbose boot.
- Fix a bug that X550EM_A (Denverton) can't force 10BaseT.
- Remove all half-duplex setting because of the chip specification.
- Add 2.5GBASE-T and 5GBASE-T support.
- Set ifm_baudrate correctly.
- Protect ec_multi* with mutex like other MP safe Ethernet drivers.
- On X550 and newer, print NVM Image Version with %u.%02x.
- On X540, print PHY FW Revision with %u.%x. 0x4030 will be printed
as "Revision 4.3 ID 0x0"
- Fix value check of OEM_NVM_IMAGE_VER.
- Print PHY ID only for copper PHY.
- Fix a bug that X550 and newer didn't linkup if it forces
100BaseTX-FDX or 10BaseT-FDX.
- Fix a bug that RX may accesses freed area. It also fixes a problem
that if_init() takes long time on many core machine.
- Check ETHERCAP_VLAN_HWTAGGING in ixgbe_setup_vlan_hw_support(). This
change has no influence to netbsd because it's enabled by default
and NetBSD has no API to disable it.
- Whitespace fix.
|
| 1.7.4.5 |
| 26-Dec-2018 |
pgoyette | Sync with HEAD, resolve a few conflicts
|
| 1.7.4.4 |
| 28-Jul-2018 |
pgoyette | Sync with HEAD
|
| 1.7.4.3 |
| 07-Apr-2018 |
pgoyette | Sync with HEAD. 77 conflicts resolved - all of them $NetBSD$
|
| 1.7.4.2 |
| 22-Mar-2018 |
pgoyette | Synch with HEAD, resolve conflicts
|
| 1.7.4.1 |
| 15-Mar-2018 |
pgoyette | Synch with HEAD
|
| 1.7.2.2 |
| 03-Dec-2017 |
jdolecek | update from HEAD
|
| 1.7.2.1 |
| 08-Nov-2017 |
jdolecek | file ixgbe_x550.c was added on branch tls-maxphys on 2017-12-03 11:37:30 +0000
|
| 1.12.2.3 |
| 13-Apr-2020 |
martin | Mostly merge changes from HEAD upto 20200411
|
| 1.12.2.2 |
| 08-Apr-2020 |
martin | Merge changes from current as of 20200406
|
| 1.12.2.1 |
| 10-Jun-2019 |
christos | Sync with HEAD
|
| 1.15.2.8 |
| 18-Oct-2023 |
martin | Pull up the following, requested by msaitoh in ticket #1753:
sys/dev/pci/ixgbe/ix_txrx.c 1.103-1.104
sys/dev/pci/ixgbe/ixgbe.c 1.334-1.338,
1.341-1.344 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.90-1.93
sys/dev/pci/ixgbe/ixgbe_82599.c 1.31-1.32
sys/dev/pci/ixgbe/ixgbe_api.c 1.29
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.5
sys/dev/pci/ixgbe/ixgbe_common.c 1.46-1.47
sys/dev/pci/ixgbe/ixgbe_common.h 1.18
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.14-1.15
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.13
sys/dev/pci/ixgbe/ixgbe_type.h 1.59-1.61
sys/dev/pci/ixgbe/ixgbe_x540.c 1.24
sys/dev/pci/ixgbe/ixgbe_x550.c 1.28
sys/dev/pci/ixgbe/ixv.c 1.187-1.192
- ixg(4): Add 82599 LS support once again.
- ixg(4): Filter out spurious link up indication more.
- ixg(4): Print DEVICE_CAPS register.
- ixg(4): Fix a bug that the number of queues is unintentionally
limited to a small number or wrong error message may be printed
when two devices' number of MSI-X vectors are different.
- Modify error message of wrong TX/RX descriptor size.
- Enable interrupt after setting IFF_RUNNING.
- Fix a bug that changing hw.ix[gv]X.qY.interrupt_rate would change
all devices all queues default interrupt rate.
- Cleanup the code.
|
| 1.15.2.7 |
| 13-Oct-2023 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #1749):
sys/dev/pci/ixgbe/if_bypass.c 1.10
sys/dev/pci/ixgbe/if_fdir.c 1.6 via patch
sys/dev/pci/ixgbe/if_sriov.c 1.18 via patch
sys/dev/pci/ixgbe/ix_txrx.c 1.102 via patch
sys/dev/pci/ixgbe/ixgbe.c 1.333,1.339 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.89
sys/dev/pci/ixgbe/ixgbe_api.h 1.17
sys/dev/pci/ixgbe/ixgbe_common.h 1.17
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.4
sys/dev/pci/ixgbe/ixgbe_common.c 1.45
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.5
sys/dev/pci/ixgbe/ixgbe_netmap.h 1.3
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.6
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.9
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.6
sys/dev/pci/ixgbe/ixgbe_type.h 1.58
sys/dev/pci/ixgbe/ixgbe_x550.c 1.27
sys/dev/pci/ixgbe/ixv.c 1.186 via patch
ixgbe: Rename some definitions, modify comment. No functional change.
Apply changes from FreeBSD's ix-3.3.31 and ixv-1.5.32.
- struct adapter *adapter -> struct ixgbe_softc *sc
- master -> primary
- black -> block
ixg(4): Whitespace. No functional change.
|
| 1.15.2.6 |
| 02-Jun-2022 |
martin | Pull up the following revisions, all via patch, requested by msaitoh
in ticket #1459:
sys/dev/pci/ixgbe/ixgbe.c 1.261,1.265-1.268,1.273,1.275-1.277,
1.312,1.316-1.319 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.85 via patch
sys/dev/pci/ixgbe/ixgbe_type.h 1.46-1.47
sys/dev/pci/ixgbe/ixgbe_x550.c 1.26
sys/dev/pci/ixgbe/ixv.c 1.182
- Reduce code duplication between ixgbe_msix_admin() and
ixgbe_legacy_irq().
- Add missing code which was not in ixgbe_msix_admin() from
ixgbe_legacy_irq() and vice versa.
- Reorder code.
- Disable/enable the OTHER interrupts correctly.
- Don't return in the middle of ixgbe_msix_admin() when an flow
director reinit failed. NetBSD currently doesn't support flow
director, so this is not a real bug.
- Print ECC, PHY and temp error log using with ratecheck().
- Correctly re-enable queue interrupt in ixgbe_legacy_irq().
- Correctly enter the recovery mode.
- No functional change:
- Add some debug printf()s.
- Don't use "more" flag for simplify.
- Fix typos in comment.
- KNF.
|
| 1.15.2.5 |
| 30-Jan-2022 |
martin | Pull up the following revisions, requested by msaitoh in ticket #1414:
sys/dev/pci/ixgbe/if_sriov.c 1.12-1.16
sys/dev/pci/ixgbe/ixgbe.c 1.295-1.297,1.300,1.304 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.84
sys/dev/pci/ixgbe/ixgbe_82598.c 1.17-1.18
sys/dev/pci/ixgbe/ixgbe_82598.h 1.9
sys/dev/pci/ixgbe/ixgbe_82599.c 1.24-1.28
sys/dev/pci/ixgbe/ixgbe_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_api.c 1.26-1.27
sys/dev/pci/ixgbe/ixgbe_api.h 1.16
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.3
sys/dev/pci/ixgbe/ixgbe_common.c 1.34-1.42
sys/dev/pci/ixgbe/ixgbe_common.h 1.15-1.16
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.12-1.13
sys/dev/pci/ixgbe/ixgbe_dcb.h 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.10-1.12
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.8
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.8
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.4
sys/dev/pci/ixgbe/ixgbe_features.h 1.4
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.13-1.15
sys/dev/pci/ixgbe/ixgbe_mbx.h 1.15-1.18
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.5
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.8
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.31
sys/dev/pci/ixgbe/ixgbe_phy.c 1.25-1.29
sys/dev/pci/ixgbe/ixgbe_phy.h 1.13
sys/dev/pci/ixgbe/ixgbe_rss.h 1.6
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.5
sys/dev/pci/ixgbe/ixgbe_type.h 1.51-1.54
sys/dev/pci/ixgbe/ixgbe_vf.c 1.28-1.29
sys/dev/pci/ixgbe/ixgbe_vf.h 1.15
sys/dev/pci/ixgbe/ixgbe_x540.c 1.20-1.22
sys/dev/pci/ixgbe/ixgbe_x540.h 1.10
sys/dev/pci/ixgbe/ixgbe_x550.c 1.21-1.25
sys/dev/pci/ixgbe/ixgbe_x550.h 1.7
sys/dev/pci/ixgbe/ixv.c 1.170, 1.174-1.175 via patch
- Add typecast for type mismatch.
- Fix retry count calculation of I2C read/write.
- Wait longer for link after fiber MAC setup.
- ixv(4): Use adapter->mta for the multicast array memory instead of
the on-stack array.
- Match X550_PHY_ID correctly on X550.
- Print NVM image version on 82598.
- Use 64bit for lxon + lxoff.
- Don't expose garbage data of hw.ixvN.debug.
- Some NetBSD unrelated changes:
- Fix infinite recursion on PCIe link down if VMDQ is used.
- Move PF mailbox initialization from ixgbe_attach() to
ixgbe_init_iov().
- Add IPv6 mask for flow director.
- Change error level in ixgbe_fc_autoneg().
- Check host interface return status when writing NVM.
- Change DCB credit parameters.
- Restore some mailbox related functions. Revert part of ixgbe_mbx.c
rev. 1.7 and ixgbe_mbx.h rev. 1.11. No functional change.
- Rename IXGBE_VT_MSGTYPE_{ACK,NACK} to
IXGBE_VT_MSGTYPE_{SUCCESS,FAILURE}. No functional change.
- Remove unused argument. Change argument.
- Remove unnecessary return value check.
- Remove debug error message.
- Remove dead code.
- Add some unused macros.
- Fix typo in comment.
- Rename some functions.
- Sort lines, modify comment.
- Whitespace fix.
|
| 1.15.2.4 |
| 15-Sep-2021 |
martin | Pull up the following (via patch), requested by msaitoh in ticket #1346:
sys/dev/pci/ixgbe/ixgbe.c 1.252, 1.280-1.283, 1.286-1.287, 1.289-1.290 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.73, 1.76-1.80 via patch
sys/dev/pci/ixgbe/ix_txrx.c 1.68-1.93
sys/dev/pci/ixgbe/ixv.c 1.153, 1.157-1.161, 1.163-1.166 via patch
sys/dev/pci/ixgbe/if_bypass.c 1.7-1.9
sys/dev/pci/ixgbe/if_fdir.c 1.4-1.5
sys/dev/pci/ixgbe/if_sriov.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_82598.c 1.16
sys/dev/pci/ixgbe/ixgbe_82599.c 1.23
sys/dev/pci/ixgbe/ixgbe_api.c 1.25
sys/dev/pci/ixgbe/ixgbe_bypass.h 1.2
sys/dev/pci/ixgbe/ixgbe_common.c 1.30-1.33
sys/dev/pci/ixgbe/ixgbe_dcb.c 1.10-1.11
sys/dev/pci/ixgbe/ixgbe_dcb.h 1.7
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82598.h 1.7
sys/dev/pci/ixgbe/ixgbe_dcb_82599.c 1.8-1.9
sys/dev/pci/ixgbe/ixgbe_dcb_82599.h 1.7
sys/dev/pci/ixgbe/ixgbe_fdir.h 1.3
sys/dev/pci/ixgbe/ixgbe_features.h 1.3
sys/dev/pci/ixgbe/ixgbe_mbx.c 1.12
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.13, 1.16-1.17
sys/dev/pci/ixgbe/ixgbe_netbsd.h 1.13-1.14
sys/dev/pci/ixgbe/ixgbe_netmap.c 1.3-1.4
sys/dev/pci/ixgbe/ixgbe_netmap.h 1.2
sys/dev/pci/ixgbe/ixgbe_osdep.c 1.7
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.29-1.30
sys/dev/pci/ixgbe/ixgbe_phy.c 1.24
sys/dev/pci/ixgbe/ixgbe_rss.h 1.5
sys/dev/pci/ixgbe/ixgbe_sriov.h 1.4
sys/dev/pci/ixgbe/ixgbe_type.h 1.49
sys/dev/pci/ixgbe/ixgbe_vf.c 1.27
sys/dev/pci/ixgbe/ixgbe_x540.c 1.18-1.19
sys/dev/pci/ixgbe/ixgbe_x540.h 1.9
sys/dev/pci/ixgbe/ixgbe_x550.c 1.19-1.20
sys/dev/pci/ixgbe/ixgbe_x550.h 1.6
sys/dev/pci/files.pci 1.438
share/man/man4/ixg.4 1.15
share/man/man4/ixv.4 1.8
- Use MCLGET() instead of homegrown cluster (jcl) allocation mechanism.
Before this commit, resource shortage was easily occurred because
the total number of the clusters is small.
- Improve performance:
- Use m_adj(ETHER_ALIGN) more.
- Sprinkle __predict_false() in the RX path.
- Don't pre-allocate a cluster for RXCOPY case to improve short
packet's performance.
- Call bus_dmamap_unload(9) via ixgbe_dmamap_unload(), before freeing
DMA buffer. Also, when the buffer is already freed, do not call
bus_dmamap_unload(9) (no resource leaks with this change). This
change is required to make ixg(4) work on alpha.
- Keep m_len and m_pkthdr.len consistent to prevent panic on arm.
- Fix panic when bus_dmamap_load_mbuf() failed in
ixgbe_setup_receive_ring().
- Added BUS_DMA_COHERENT flag to bus_dmamem_map() to improve stability
on aarch64.
- Use uint64_t instead of bus_addr_t for the TX descriptor's buffer
address. At least, this change is required for macppc
(sizeof(bus_addr_t) == 4) to make TX work.
- Fix little-endian dependence.
- Set rxr->next_to_refresh correctly in ixgbe_setup_receive_ring().
- Refresh unrefreshed descriptors' buffers correctly.
- Don't call bus_dmamap_sync with rx_mbuf_sz(== MCLBYTES) to prevent
panic.
- Save the discard_multidesc state to not to forget the state by
exiting rxeof().
- Add missing increment of no_mbuf error counter.
- Don't increment no_mbuf evcnt(9) when discarding multi-descriptor
packet.
- ixv: Modify error message to sync with ixgbe.c
- Print the error value of ixgbe_reset_hw() for debugging.
- Remove extra unlock/lock processing around if_percpuq_enqueue().
- Refactor rxr->next_to_check updating.
- Add new sysctl "rx_copy_len".
- Add a new sysctl to read rxr->next_to_refresh.
- Print error number when error occurred.
- Rename ix{gbe,v}_stop() with ix{gbe,v}_stop_locked(). No functional
change.
- Don't use fixed value.
- Comment out flow director processing in fast path.
- Add missing NetBSD RCS IDs and __KERNEL_RCSID()s.
- KNF.
- Fix typos.
|
| 1.15.2.3 |
| 10-Jul-2020 |
martin | Pull up the following revisions, requested by msaitoh in ticket #997:
sys/dev/pci/ixgbe/ix_txrx.c 1.62-1.63 via patch
sys/dev/pci/ixgbe/ixgbe.c 1.225, 1.228-1.229,
1.232 via patch
sys/dev/pci/ixgbe/ixgbe.h 1.64, 1.66
sys/dev/pci/ixgbe/ixv.c 1.146, 1.148-1.150
sys/dev/pci/ixgbe/ixgbe_common.c 1.27
sys/dev/pci/ixgbe/ixgbe_vf.c 1.23
sys/dev/pci/ixgbe/ixgbe_82598.c 1.15
sys/dev/pci/ixgbe/ixgbe_x550.c 1.18
sys/dev/pci/ixgbe/ixgbe_netbsd.c 1.14
sys/dev/pci/ixgbe/ixgbe_phy.c 1.21
sys/dev/pci/ixgbe/ixgbe_osdep.h 1.26
- Fix IXGBE_LE32_TO_CPUS() macro for big endian machine. This problem
was only on X550*.
- Add debug printf()s.
- Use unsigned to avoid undefined behavior in
ixgbe_fc_enable_generic().
- Modify a little to reduce diff between ixgbe.c and ixv.c.
No functional change.
- Modify comment.
- Remove unused macros.
- Whitespace fix.
- Fix typos.
|
| 1.15.2.2 |
| 28-Jan-2020 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #664):
sys/dev/pci/ixgbe/ixgbe_82598.c: revision 1.13
sys/dev/pci/ixgbe/ixgbe.c: revision 1.219
sys/dev/pci/ixgbe/ixgbe_phy.c: revision 1.20
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.17
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.22
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.44
Add recovery code for unsupported SFP+.
Before this commit:
If an unsupported SFP module is inserted before booting, the driver attach
failed and there was no way to recover form it without rebooting or
detaching/reattaching driver (drvctl -d && drvctl -r pciN).
After this commit:
We can automatically recover any time by replacing it with a supported
module.
|
| 1.15.2.1 |
| 26-Sep-2019 |
martin | Pull up the following revisions, requested by msaitoh in ticket #246:
sys/dev/pci/ixgbe/ixgbe_type.h 1.42-1.43
sys/dev/pci/ixgbe/ixgbe.c 1.209-1.213
sys/dev/pci/ixgbe/ixgbe_x550.c 1.16
sys/dev/pci/ixgbe/ixv.c 1.131-1.138
sys/dev/pci/ixgbe/ixgbe_vf.c 1.19-1.22
sys/dev/pci/ixgbe/ixgbe_vf.h 1.14
sys/dev/pci/ixgbe/ixgbe.h 1.57-1.58
share/man/man4/ixv.4 1.5
- Fix a bug that MBSDC (Bad SFD Count) isn't counted on X550EM_X and
X550EM_A. The register is for X550 and newer.
- ixv(4): Make SIOCADDMULTI returns ENOSPC and print error message
when the Ethernet multicast address list exceeds the limit(30) and
can't be ALLMULTI.
- ixv(4): SIOCZIFDATA clear the event counters as ixgbe.c.
- Reduce ixv(4)'s multicast table array size in ixv_set_multi from
MAX_NUM_MULTICAST_ADDRESSES(128) to IXGBE_MAX_VF_MC(30).
- ixv(4): Add support ALLMULTI and PROMISC.
- if_flags is neither int nor short. It's unsigned short.
- ixg(4): Fix a bug that the multicast filter isn't correctly
initialized when the total number of the Ethernet multicast
addresses is just 128.
- Make ixv_set_multi() work correctly (especially for PROMISC) when the
function is called from if_init().
- Remove *_set_promisc() and use *_set_multi(). And then, rename
*_set_multi() to *_set_rxfilter().
- ixv(4): If a multicast entry has range, use ALLMULTI like others.
- Fix typo in comment. Found by Wataru Ashihara.
|
| 1.17.2.1 |
| 29-Feb-2020 |
ad | Sync with head.
|
| 1.18.10.2 |
| 17-Jun-2021 |
thorpej | Sync w/ HEAD.
|
| 1.18.10.1 |
| 13-May-2021 |
thorpej | Sync with HEAD.
|
| 1.19.2.1 |
| 31-May-2021 |
cjep | sync with head
|
| 1.26.4.2 |
| 13-Oct-2023 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #407):
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.47
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.28
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.60
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.31
sys/dev/pci/ixgbe/ixgbe_82599.c: revision 1.32
sys/dev/pci/ixgbe/ixv.c: revision 1.187
sys/dev/pci/ixgbe/ixv.c: revision 1.188
sys/dev/pci/ixgbe/ixv.c: revision 1.189
sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.18
sys/dev/pci/ixgbe/ixgbe_x540.c: revision 1.24
sys/dev/pci/ixgbe/ixgbe.c: revision 1.334
sys/dev/pci/ixgbe/ixgbe.c: revision 1.335
sys/dev/pci/ixgbe/ixgbe.c: revision 1.336
sys/dev/pci/ixgbe/ixgbe.c: revision 1.337
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.103
sys/dev/pci/ixgbe/ixgbe.c: revision 1.338
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.59
sys/dev/pci/ixgbe/ixgbe_dcb_82598.c: revision 1.13
sys/dev/pci/ixgbe/ixgbe_dcb.c: revision 1.14
sys/dev/pci/ixgbe/ixgbe_dcb.c: revision 1.15
sys/dev/pci/ixgbe/ixgbe_api.c: revision 1.29
sys/dev/pci/ixgbe/ixgbe_bypass.h: revision 1.5
sys/dev/pci/ixgbe/ixgbe.h: revision 1.90
sys/dev/pci/ixgbe/ixgbe.h: revision 1.91
sys/dev/pci/ixgbe/ixgbe.h: revision 1.92
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.46
ixg(4): Remove unused and old function. No functional change.
- From FreeBSD's ix-3.3.32.
ixg(4): Add 82599 LS once again.
- From:
FreeBSD: 9228ac3a69c4c7401a743e6465e118101a2beeb0
DPDK: 549ccd3dc01539e060597b503f2b65b272de3347
- This was removed 5 years ago. From the commit message:
> Remove IXGBE_DEV_ID_82599_LS(0x154f) support again. I don't know why. This
> was added in ix-3.2.18.tar.gz(NetBSD: ixgbe_82599.c rev. 1.20) and
> removed in ix-3.3.6.tar.gz.
ixg(4): Filter out spurious link up indication
- Extend SFP+ cage crosstalk fix by re-checking link state after 5ms delay
to filter out spurious link up indication by transceiver with no fiber
cable connected.
- From FreeBSD:
In-tree: 04a5e6d7cadd06b10169c3c3a560649e7dc7444c
Out of tree: ix-3.3.33.
ixgbe: Simplify definitions. No functional change.
Both DEFAULT_{TX,RX}D and PERFORM_{TX,RX}D are 2048. Use DEFAULT_{TX,RX}D.
Same as FreeBSD.
ixgbe: Modify error message of wrong TX/RX descriptor size.
- Based from FreeBSD ix-3.3.35. I think ix-3.3.35's RING_INCREMENT(== 32)
is wrong. It should be 8(DBA_ALIGN / sizeof(union ixgbe_adv_[tr]x_desc)).
Linux also uses 8.
ixgbe: Remove NO_82599_SUPPORT and NO_X540_SUPPORT support. NFCI.
From FreeBSD ix-3.3.35. Note that this file is not used in NetBSD.
ixgbe: Enable interrupt after setting IFF_RUNNING. Same as FreeBSD x-3.3.35.
ixgbe: Cleanup. No fucntional change.
Remove unused code, fix whitespace and modify comment to reduce against
FreeBSD(mainly from ix-3.3.35).
|
| 1.26.4.1 |
| 13-Oct-2023 |
martin | Pull up following revision(s) (requested by msaitoh in ticket #405):
sys/dev/pci/ixgbe/ixgbe_x550.c: revision 1.27
sys/dev/pci/ixgbe/ixgbe_fdir.h: revision 1.5
sys/dev/pci/ixgbe/ixv.c: revision 1.186
sys/dev/pci/ixgbe/ixgbe_osdep.c: revision 1.9
sys/dev/pci/ixgbe/ixgbe_common.h: revision 1.17
sys/dev/pci/ixgbe/ixgbe_api.h: revision 1.17
sys/dev/pci/ixgbe/ixgbe.h: revision 1.89
sys/dev/pci/ixgbe/if_fdir.c: revision 1.6
sys/dev/pci/ixgbe/if_sriov.c: revision 1.18
sys/dev/pci/ixgbe/ixgbe.c: revision 1.333
sys/dev/pci/ixgbe/ix_txrx.c: revision 1.102
sys/dev/pci/ixgbe/ixgbe.c: revision 1.339
sys/dev/pci/ixgbe/ixgbe_type.h: revision 1.58
sys/dev/pci/ixgbe/ixgbe_sriov.h: revision 1.6
sys/dev/pci/ixgbe/if_bypass.c: revision 1.10
sys/dev/pci/ixgbe/ixgbe_bypass.h: revision 1.4
sys/dev/pci/ixgbe/ixgbe_netmap.h: revision 1.3
sys/dev/pci/ixgbe/ixgbe_netmap.c: revision 1.6
sys/dev/pci/ixgbe/ixgbe_common.c: revision 1.45
ixgbe: Rename some definitions, modify comment. No functional change.
Apply changes from FreeBSD's ix-3.3.31 and ixv-1.5.32.
- struct adapter *adapter -> struct ixgbe_softc *sc
- master -> primary
- black -> block
ixg(4): Whitespace. No functional change.
|
