pci_subr.c revision 1.61
1 /* $NetBSD: pci_subr.c,v 1.61 2005/06/28 00:28:42 thorpej Exp $ */ 2 3 /* 4 * Copyright (c) 1997 Zubin D. Dittia. All rights reserved. 5 * Copyright (c) 1995, 1996, 1998, 2000 6 * Christopher G. Demetriou. All rights reserved. 7 * Copyright (c) 1994 Charles M. Hannum. All rights reserved. 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 1. Redistributions of source code must retain the above copyright 13 * notice, this list of conditions and the following disclaimer. 14 * 2. Redistributions in binary form must reproduce the above copyright 15 * notice, this list of conditions and the following disclaimer in the 16 * documentation and/or other materials provided with the distribution. 17 * 3. All advertising materials mentioning features or use of this software 18 * must display the following acknowledgement: 19 * This product includes software developed by Charles M. Hannum. 20 * 4. The name of the author may not be used to endorse or promote products 21 * derived from this software without specific prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 24 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 25 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 26 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 27 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 28 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 29 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 30 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 31 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 32 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 33 */ 34 35 /* 36 * PCI autoconfiguration support functions. 37 * 38 * Note: This file is also built into a userland library (libpci). 39 * Pay attention to this when you make modifications. 40 */ 41 42 #include <sys/cdefs.h> 43 __KERNEL_RCSID(0, "$NetBSD: pci_subr.c,v 1.61 2005/06/28 00:28:42 thorpej Exp $"); 44 45 #ifdef _KERNEL_OPT 46 #include "opt_pci.h" 47 #endif 48 49 #include <sys/param.h> 50 #include <sys/systm.h> 51 52 #ifdef _KERNEL 53 #include <machine/intr.h> 54 #else 55 #include <pci.h> 56 #include <stdio.h> 57 #endif 58 59 #include <dev/pci/pcireg.h> 60 #ifdef _KERNEL 61 #include <dev/pci/pcivar.h> 62 #endif 63 #ifdef PCIVERBOSE 64 #include <dev/pci/pcidevs.h> 65 #endif 66 67 /* 68 * Descriptions of known PCI classes and subclasses. 69 * 70 * Subclasses are described in the same way as classes, but have a 71 * NULL subclass pointer. 72 */ 73 struct pci_class { 74 const char *name; 75 int val; /* as wide as pci_{,sub}class_t */ 76 const struct pci_class *subclasses; 77 }; 78 79 static const struct pci_class pci_subclass_prehistoric[] = { 80 { "miscellaneous", PCI_SUBCLASS_PREHISTORIC_MISC, }, 81 { "VGA", PCI_SUBCLASS_PREHISTORIC_VGA, }, 82 { 0 } 83 }; 84 85 static const struct pci_class pci_subclass_mass_storage[] = { 86 { "SCSI", PCI_SUBCLASS_MASS_STORAGE_SCSI, }, 87 { "IDE", PCI_SUBCLASS_MASS_STORAGE_IDE, }, 88 { "floppy", PCI_SUBCLASS_MASS_STORAGE_FLOPPY, }, 89 { "IPI", PCI_SUBCLASS_MASS_STORAGE_IPI, }, 90 { "RAID", PCI_SUBCLASS_MASS_STORAGE_RAID, }, 91 { "ATA", PCI_SUBCLASS_MASS_STORAGE_ATA, }, 92 { "SATA", PCI_SUBCLASS_MASS_STORAGE_SATA, }, 93 { "miscellaneous", PCI_SUBCLASS_MASS_STORAGE_MISC, }, 94 { 0 }, 95 }; 96 97 static const struct pci_class pci_subclass_network[] = { 98 { "ethernet", PCI_SUBCLASS_NETWORK_ETHERNET, }, 99 { "token ring", PCI_SUBCLASS_NETWORK_TOKENRING, }, 100 { "FDDI", PCI_SUBCLASS_NETWORK_FDDI, }, 101 { "ATM", PCI_SUBCLASS_NETWORK_ATM, }, 102 { "ISDN", PCI_SUBCLASS_NETWORK_ISDN, }, 103 { "WorldFip", PCI_SUBCLASS_NETWORK_WORLDFIP, }, 104 { "PCMIG Multi Computing", PCI_SUBCLASS_NETWORK_PCIMGMULTICOMP, }, 105 { "miscellaneous", PCI_SUBCLASS_NETWORK_MISC, }, 106 { 0 }, 107 }; 108 109 static const struct pci_class pci_subclass_display[] = { 110 { "VGA", PCI_SUBCLASS_DISPLAY_VGA, }, 111 { "XGA", PCI_SUBCLASS_DISPLAY_XGA, }, 112 { "3D", PCI_SUBCLASS_DISPLAY_3D, }, 113 { "miscellaneous", PCI_SUBCLASS_DISPLAY_MISC, }, 114 { 0 }, 115 }; 116 117 static const struct pci_class pci_subclass_multimedia[] = { 118 { "video", PCI_SUBCLASS_MULTIMEDIA_VIDEO, }, 119 { "audio", PCI_SUBCLASS_MULTIMEDIA_AUDIO, }, 120 { "telephony", PCI_SUBCLASS_MULTIMEDIA_TELEPHONY, }, 121 { "miscellaneous", PCI_SUBCLASS_MULTIMEDIA_MISC, }, 122 { 0 }, 123 }; 124 125 static const struct pci_class pci_subclass_memory[] = { 126 { "RAM", PCI_SUBCLASS_MEMORY_RAM, }, 127 { "flash", PCI_SUBCLASS_MEMORY_FLASH, }, 128 { "miscellaneous", PCI_SUBCLASS_MEMORY_MISC, }, 129 { 0 }, 130 }; 131 132 static const struct pci_class pci_subclass_bridge[] = { 133 { "host", PCI_SUBCLASS_BRIDGE_HOST, }, 134 { "ISA", PCI_SUBCLASS_BRIDGE_ISA, }, 135 { "EISA", PCI_SUBCLASS_BRIDGE_EISA, }, 136 { "MicroChannel", PCI_SUBCLASS_BRIDGE_MC, }, 137 { "PCI", PCI_SUBCLASS_BRIDGE_PCI, }, 138 { "PCMCIA", PCI_SUBCLASS_BRIDGE_PCMCIA, }, 139 { "NuBus", PCI_SUBCLASS_BRIDGE_NUBUS, }, 140 { "CardBus", PCI_SUBCLASS_BRIDGE_CARDBUS, }, 141 { "RACEway", PCI_SUBCLASS_BRIDGE_RACEWAY, }, 142 { "Semi-transparent PCI", PCI_SUBCLASS_BRIDGE_STPCI, }, 143 { "InfiniBand", PCI_SUBCLASS_BRIDGE_INFINIBAND, }, 144 { "miscellaneous", PCI_SUBCLASS_BRIDGE_MISC, }, 145 { 0 }, 146 }; 147 148 static const struct pci_class pci_subclass_communications[] = { 149 { "serial", PCI_SUBCLASS_COMMUNICATIONS_SERIAL, }, 150 { "parallel", PCI_SUBCLASS_COMMUNICATIONS_PARALLEL, }, 151 { "multi-port serial", PCI_SUBCLASS_COMMUNICATIONS_MPSERIAL, }, 152 { "modem", PCI_SUBCLASS_COMMUNICATIONS_MODEM, }, 153 { "GPIB", PCI_SUBCLASS_COMMUNICATIONS_GPIB, }, 154 { "smartcard", PCI_SUBCLASS_COMMUNICATIONS_SMARTCARD, }, 155 { "miscellaneous", PCI_SUBCLASS_COMMUNICATIONS_MISC, }, 156 { 0 }, 157 }; 158 159 static const struct pci_class pci_subclass_system[] = { 160 { "interrupt", PCI_SUBCLASS_SYSTEM_PIC, }, 161 { "8237 DMA", PCI_SUBCLASS_SYSTEM_DMA, }, 162 { "8254 timer", PCI_SUBCLASS_SYSTEM_TIMER, }, 163 { "RTC", PCI_SUBCLASS_SYSTEM_RTC, }, 164 { "PCI Hot-Plug", PCI_SUBCLASS_SYSTEM_RTC, }, 165 { "miscellaneous", PCI_SUBCLASS_SYSTEM_MISC, }, 166 { 0 }, 167 }; 168 169 static const struct pci_class pci_subclass_input[] = { 170 { "keyboard", PCI_SUBCLASS_INPUT_KEYBOARD, }, 171 { "digitizer", PCI_SUBCLASS_INPUT_DIGITIZER, }, 172 { "mouse", PCI_SUBCLASS_INPUT_MOUSE, }, 173 { "scanner", PCI_SUBCLASS_INPUT_SCANNER, }, 174 { "game port", PCI_SUBCLASS_INPUT_GAMEPORT, }, 175 { "miscellaneous", PCI_SUBCLASS_INPUT_MISC, }, 176 { 0 }, 177 }; 178 179 static const struct pci_class pci_subclass_dock[] = { 180 { "generic", PCI_SUBCLASS_DOCK_GENERIC, }, 181 { "miscellaneous", PCI_SUBCLASS_DOCK_MISC, }, 182 { 0 }, 183 }; 184 185 static const struct pci_class pci_subclass_processor[] = { 186 { "386", PCI_SUBCLASS_PROCESSOR_386, }, 187 { "486", PCI_SUBCLASS_PROCESSOR_486, }, 188 { "Pentium", PCI_SUBCLASS_PROCESSOR_PENTIUM, }, 189 { "Alpha", PCI_SUBCLASS_PROCESSOR_ALPHA, }, 190 { "PowerPC", PCI_SUBCLASS_PROCESSOR_POWERPC, }, 191 { "MIPS", PCI_SUBCLASS_PROCESSOR_MIPS, }, 192 { "Co-processor", PCI_SUBCLASS_PROCESSOR_COPROC, }, 193 { 0 }, 194 }; 195 196 static const struct pci_class pci_subclass_serialbus[] = { 197 { "Firewire", PCI_SUBCLASS_SERIALBUS_FIREWIRE, }, 198 { "ACCESS.bus", PCI_SUBCLASS_SERIALBUS_ACCESS, }, 199 { "SSA", PCI_SUBCLASS_SERIALBUS_SSA, }, 200 { "USB", PCI_SUBCLASS_SERIALBUS_USB, }, 201 /* XXX Fiber Channel/_FIBRECHANNEL */ 202 { "Fiber Channel", PCI_SUBCLASS_SERIALBUS_FIBER, }, 203 { "SMBus", PCI_SUBCLASS_SERIALBUS_SMBUS, }, 204 { "InfiniBand", PCI_SUBCLASS_SERIALBUS_INFINIBAND, }, 205 { "IPMI", PCI_SUBCLASS_SERIALBUS_IPMI, }, 206 { "SERCOS", PCI_SUBCLASS_SERIALBUS_SERCOS, }, 207 { "CANbus", PCI_SUBCLASS_SERIALBUS_CANBUS, }, 208 { 0 }, 209 }; 210 211 static const struct pci_class pci_subclass_wireless[] = { 212 { "IrDA", PCI_SUBCLASS_WIRELESS_IRDA, }, 213 { "Consumer IR", PCI_SUBCLASS_WIRELESS_CONSUMERIR, }, 214 { "RF", PCI_SUBCLASS_WIRELESS_RF, }, 215 { "bluetooth", PCI_SUBCLASS_WIRELESS_BLUETOOTH, }, 216 { "broadband", PCI_SUBCLASS_WIRELESS_BROADBAND, }, 217 { "802.11a (5 GHz)", PCI_SUBCLASS_WIRELESS_802_11A, }, 218 { "802.11b (2.4 GHz)", PCI_SUBCLASS_WIRELESS_802_11B, }, 219 { "miscellaneous", PCI_SUBCLASS_WIRELESS_MISC, }, 220 { 0 }, 221 }; 222 223 static const struct pci_class pci_subclass_i2o[] = { 224 { "standard", PCI_SUBCLASS_I2O_STANDARD, }, 225 { 0 }, 226 }; 227 228 static const struct pci_class pci_subclass_satcom[] = { 229 { "TV", PCI_SUBCLASS_SATCOM_TV, }, 230 { "audio", PCI_SUBCLASS_SATCOM_AUDIO, }, 231 { "voice", PCI_SUBCLASS_SATCOM_VOICE, }, 232 { "data", PCI_SUBCLASS_SATCOM_DATA, }, 233 { 0 }, 234 }; 235 236 static const struct pci_class pci_subclass_crypto[] = { 237 { "network/computing", PCI_SUBCLASS_CRYPTO_NETCOMP, }, 238 { "entertainment", PCI_SUBCLASS_CRYPTO_ENTERTAINMENT, }, 239 { "miscellaneous", PCI_SUBCLASS_CRYPTO_MISC, }, 240 { 0 }, 241 }; 242 243 static const struct pci_class pci_subclass_dasp[] = { 244 { "DPIO", PCI_SUBCLASS_DASP_DPIO, }, 245 { "Time and Frequency", PCI_SUBCLASS_DASP_TIMEFREQ, }, 246 { "synchronization", PCI_SUBCLASS_DASP_SYNC, }, 247 { "management", PCI_SUBCLASS_DASP_MGMT, }, 248 { "miscellaneous", PCI_SUBCLASS_DASP_MISC, }, 249 { 0 }, 250 }; 251 252 static const struct pci_class pci_class[] = { 253 { "prehistoric", PCI_CLASS_PREHISTORIC, 254 pci_subclass_prehistoric, }, 255 { "mass storage", PCI_CLASS_MASS_STORAGE, 256 pci_subclass_mass_storage, }, 257 { "network", PCI_CLASS_NETWORK, 258 pci_subclass_network, }, 259 { "display", PCI_CLASS_DISPLAY, 260 pci_subclass_display, }, 261 { "multimedia", PCI_CLASS_MULTIMEDIA, 262 pci_subclass_multimedia, }, 263 { "memory", PCI_CLASS_MEMORY, 264 pci_subclass_memory, }, 265 { "bridge", PCI_CLASS_BRIDGE, 266 pci_subclass_bridge, }, 267 { "communications", PCI_CLASS_COMMUNICATIONS, 268 pci_subclass_communications, }, 269 { "system", PCI_CLASS_SYSTEM, 270 pci_subclass_system, }, 271 { "input", PCI_CLASS_INPUT, 272 pci_subclass_input, }, 273 { "dock", PCI_CLASS_DOCK, 274 pci_subclass_dock, }, 275 { "processor", PCI_CLASS_PROCESSOR, 276 pci_subclass_processor, }, 277 { "serial bus", PCI_CLASS_SERIALBUS, 278 pci_subclass_serialbus, }, 279 { "wireless", PCI_CLASS_WIRELESS, 280 pci_subclass_wireless, }, 281 { "I2O", PCI_CLASS_I2O, 282 pci_subclass_i2o, }, 283 { "satellite comm", PCI_CLASS_SATCOM, 284 pci_subclass_satcom, }, 285 { "crypto", PCI_CLASS_CRYPTO, 286 pci_subclass_crypto, }, 287 { "DASP", PCI_CLASS_DASP, 288 pci_subclass_dasp, }, 289 { "undefined", PCI_CLASS_UNDEFINED, 290 0, }, 291 { 0 }, 292 }; 293 294 #ifdef PCIVERBOSE 295 /* 296 * Descriptions of of known vendors and devices ("products"). 297 */ 298 struct pci_vendor { 299 pci_vendor_id_t vendor; 300 const char *vendorname; 301 }; 302 struct pci_product { 303 pci_vendor_id_t vendor; 304 pci_product_id_t product; 305 const char *productname; 306 }; 307 308 #include <dev/pci/pcidevs_data.h> 309 #endif /* PCIVERBOSE */ 310 311 const char * 312 pci_findvendor(pcireg_t id_reg) 313 { 314 #ifdef PCIVERBOSE 315 pci_vendor_id_t vendor = PCI_VENDOR(id_reg); 316 int n; 317 318 for (n = 0; n < pci_nvendors; n++) 319 if (pci_vendors[n].vendor == vendor) 320 return (pci_vendors[n].vendorname); 321 #endif 322 return (NULL); 323 } 324 325 const char * 326 pci_findproduct(pcireg_t id_reg) 327 { 328 #ifdef PCIVERBOSE 329 pci_vendor_id_t vendor = PCI_VENDOR(id_reg); 330 pci_product_id_t product = PCI_PRODUCT(id_reg); 331 int n; 332 333 for (n = 0; n < pci_nproducts; n++) 334 if (pci_products[n].vendor == vendor && 335 pci_products[n].product == product) 336 return (pci_products[n].productname); 337 #endif 338 return (NULL); 339 } 340 341 void 342 pci_devinfo(pcireg_t id_reg, pcireg_t class_reg, int showclass, char *cp, 343 size_t l) 344 { 345 pci_vendor_id_t vendor; 346 pci_product_id_t product; 347 pci_class_t class; 348 pci_subclass_t subclass; 349 pci_interface_t interface; 350 pci_revision_t revision; 351 const char *vendor_namep, *product_namep; 352 const struct pci_class *classp, *subclassp; 353 #ifdef PCIVERBOSE 354 const char *unmatched = "unknown "; 355 #else 356 const char *unmatched = ""; 357 #endif 358 char *ep; 359 360 ep = cp + l; 361 362 vendor = PCI_VENDOR(id_reg); 363 product = PCI_PRODUCT(id_reg); 364 365 class = PCI_CLASS(class_reg); 366 subclass = PCI_SUBCLASS(class_reg); 367 interface = PCI_INTERFACE(class_reg); 368 revision = PCI_REVISION(class_reg); 369 370 vendor_namep = pci_findvendor(id_reg); 371 product_namep = pci_findproduct(id_reg); 372 373 classp = pci_class; 374 while (classp->name != NULL) { 375 if (class == classp->val) 376 break; 377 classp++; 378 } 379 380 subclassp = (classp->name != NULL) ? classp->subclasses : NULL; 381 while (subclassp && subclassp->name != NULL) { 382 if (subclass == subclassp->val) 383 break; 384 subclassp++; 385 } 386 387 if (vendor_namep == NULL) 388 cp += snprintf(cp, ep - cp, "%svendor 0x%04x product 0x%04x", 389 unmatched, vendor, product); 390 else if (product_namep != NULL) 391 cp += snprintf(cp, ep - cp, "%s %s", vendor_namep, 392 product_namep); 393 else 394 cp += snprintf(cp, ep - cp, "%s product 0x%04x", 395 vendor_namep, product); 396 if (showclass) { 397 cp += snprintf(cp, ep - cp, " ("); 398 if (classp->name == NULL) 399 cp += snprintf(cp, ep - cp, 400 "class 0x%02x, subclass 0x%02x", class, subclass); 401 else { 402 if (subclassp == NULL || subclassp->name == NULL) 403 cp += snprintf(cp, ep - cp, 404 "%s subclass 0x%02x", 405 classp->name, subclass); 406 else 407 cp += snprintf(cp, ep - cp, "%s %s", 408 subclassp->name, classp->name); 409 } 410 if (interface != 0) 411 cp += snprintf(cp, ep - cp, ", interface 0x%02x", 412 interface); 413 if (revision != 0) 414 cp += snprintf(cp, ep - cp, ", revision 0x%02x", 415 revision); 416 cp += snprintf(cp, ep - cp, ")"); 417 } 418 } 419 420 /* 421 * Print out most of the PCI configuration registers. Typically used 422 * in a device attach routine like this: 423 * 424 * #ifdef MYDEV_DEBUG 425 * printf("%s: ", sc->sc_dev.dv_xname); 426 * pci_conf_print(pa->pa_pc, pa->pa_tag, NULL); 427 * #endif 428 */ 429 430 #define i2o(i) ((i) * 4) 431 #define o2i(o) ((o) / 4) 432 #define onoff(str, bit) \ 433 printf(" %s: %s\n", (str), (rval & (bit)) ? "on" : "off"); 434 435 static void 436 pci_conf_print_common( 437 #ifdef _KERNEL 438 pci_chipset_tag_t pc, pcitag_t tag, 439 #endif 440 const pcireg_t *regs) 441 { 442 const char *name; 443 const struct pci_class *classp, *subclassp; 444 pcireg_t rval; 445 446 rval = regs[o2i(PCI_ID_REG)]; 447 name = pci_findvendor(rval); 448 if (name) 449 printf(" Vendor Name: %s (0x%04x)\n", name, 450 PCI_VENDOR(rval)); 451 else 452 printf(" Vendor ID: 0x%04x\n", PCI_VENDOR(rval)); 453 name = pci_findproduct(rval); 454 if (name) 455 printf(" Device Name: %s (0x%04x)\n", name, 456 PCI_PRODUCT(rval)); 457 else 458 printf(" Device ID: 0x%04x\n", PCI_PRODUCT(rval)); 459 460 rval = regs[o2i(PCI_COMMAND_STATUS_REG)]; 461 462 printf(" Command register: 0x%04x\n", rval & 0xffff); 463 onoff("I/O space accesses", PCI_COMMAND_IO_ENABLE); 464 onoff("Memory space accesses", PCI_COMMAND_MEM_ENABLE); 465 onoff("Bus mastering", PCI_COMMAND_MASTER_ENABLE); 466 onoff("Special cycles", PCI_COMMAND_SPECIAL_ENABLE); 467 onoff("MWI transactions", PCI_COMMAND_INVALIDATE_ENABLE); 468 onoff("Palette snooping", PCI_COMMAND_PALETTE_ENABLE); 469 onoff("Parity error checking", PCI_COMMAND_PARITY_ENABLE); 470 onoff("Address/data stepping", PCI_COMMAND_STEPPING_ENABLE); 471 onoff("System error (SERR)", PCI_COMMAND_SERR_ENABLE); 472 onoff("Fast back-to-back transactions", PCI_COMMAND_BACKTOBACK_ENABLE); 473 474 printf(" Status register: 0x%04x\n", (rval >> 16) & 0xffff); 475 onoff("Capability List support", PCI_STATUS_CAPLIST_SUPPORT); 476 onoff("66 MHz capable", PCI_STATUS_66MHZ_SUPPORT); 477 onoff("User Definable Features (UDF) support", PCI_STATUS_UDF_SUPPORT); 478 onoff("Fast back-to-back capable", PCI_STATUS_BACKTOBACK_SUPPORT); 479 onoff("Data parity error detected", PCI_STATUS_PARITY_ERROR); 480 481 printf(" DEVSEL timing: "); 482 switch (rval & PCI_STATUS_DEVSEL_MASK) { 483 case PCI_STATUS_DEVSEL_FAST: 484 printf("fast"); 485 break; 486 case PCI_STATUS_DEVSEL_MEDIUM: 487 printf("medium"); 488 break; 489 case PCI_STATUS_DEVSEL_SLOW: 490 printf("slow"); 491 break; 492 default: 493 printf("unknown/reserved"); /* XXX */ 494 break; 495 } 496 printf(" (0x%x)\n", (rval & PCI_STATUS_DEVSEL_MASK) >> 25); 497 498 onoff("Slave signaled Target Abort", PCI_STATUS_TARGET_TARGET_ABORT); 499 onoff("Master received Target Abort", PCI_STATUS_MASTER_TARGET_ABORT); 500 onoff("Master received Master Abort", PCI_STATUS_MASTER_ABORT); 501 onoff("Asserted System Error (SERR)", PCI_STATUS_SPECIAL_ERROR); 502 onoff("Parity error detected", PCI_STATUS_PARITY_DETECT); 503 504 rval = regs[o2i(PCI_CLASS_REG)]; 505 for (classp = pci_class; classp->name != NULL; classp++) { 506 if (PCI_CLASS(rval) == classp->val) 507 break; 508 } 509 subclassp = (classp->name != NULL) ? classp->subclasses : NULL; 510 while (subclassp && subclassp->name != NULL) { 511 if (PCI_SUBCLASS(rval) == subclassp->val) 512 break; 513 subclassp++; 514 } 515 if (classp->name != NULL) { 516 printf(" Class Name: %s (0x%02x)\n", classp->name, 517 PCI_CLASS(rval)); 518 if (subclassp != NULL && subclassp->name != NULL) 519 printf(" Subclass Name: %s (0x%02x)\n", 520 subclassp->name, PCI_SUBCLASS(rval)); 521 else 522 printf(" Subclass ID: 0x%02x\n", PCI_SUBCLASS(rval)); 523 } else { 524 printf(" Class ID: 0x%02x\n", PCI_CLASS(rval)); 525 printf(" Subclass ID: 0x%02x\n", PCI_SUBCLASS(rval)); 526 } 527 printf(" Interface: 0x%02x\n", PCI_INTERFACE(rval)); 528 printf(" Revision ID: 0x%02x\n", PCI_REVISION(rval)); 529 530 rval = regs[o2i(PCI_BHLC_REG)]; 531 printf(" BIST: 0x%02x\n", PCI_BIST(rval)); 532 printf(" Header Type: 0x%02x%s (0x%02x)\n", PCI_HDRTYPE_TYPE(rval), 533 PCI_HDRTYPE_MULTIFN(rval) ? "+multifunction" : "", 534 PCI_HDRTYPE(rval)); 535 printf(" Latency Timer: 0x%02x\n", PCI_LATTIMER(rval)); 536 printf(" Cache Line Size: 0x%02x\n", PCI_CACHELINE(rval)); 537 } 538 539 static int 540 pci_conf_print_bar( 541 #ifdef _KERNEL 542 pci_chipset_tag_t pc, pcitag_t tag, 543 #endif 544 const pcireg_t *regs, int reg, const char *name 545 #ifdef _KERNEL 546 , int sizebar 547 #endif 548 ) 549 { 550 int width; 551 pcireg_t rval, rval64h; 552 #ifdef _KERNEL 553 int s; 554 pcireg_t mask, mask64h; 555 #endif 556 557 width = 4; 558 559 /* 560 * Section 6.2.5.1, `Address Maps', tells us that: 561 * 562 * 1) The builtin software should have already mapped the 563 * device in a reasonable way. 564 * 565 * 2) A device which wants 2^n bytes of memory will hardwire 566 * the bottom n bits of the address to 0. As recommended, 567 * we write all 1s and see what we get back. 568 */ 569 570 rval = regs[o2i(reg)]; 571 if (PCI_MAPREG_TYPE(rval) == PCI_MAPREG_TYPE_MEM && 572 PCI_MAPREG_MEM_TYPE(rval) == PCI_MAPREG_MEM_TYPE_64BIT) { 573 rval64h = regs[o2i(reg + 4)]; 574 width = 8; 575 } else 576 rval64h = 0; 577 578 #ifdef _KERNEL 579 /* XXX don't size unknown memory type? */ 580 if (rval != 0 && sizebar) { 581 /* 582 * The following sequence seems to make some devices 583 * (e.g. host bus bridges, which don't normally 584 * have their space mapped) very unhappy, to 585 * the point of crashing the system. 586 * 587 * Therefore, if the mapping register is zero to 588 * start out with, don't bother trying. 589 */ 590 s = splhigh(); 591 pci_conf_write(pc, tag, reg, 0xffffffff); 592 mask = pci_conf_read(pc, tag, reg); 593 pci_conf_write(pc, tag, reg, rval); 594 if (PCI_MAPREG_TYPE(rval) == PCI_MAPREG_TYPE_MEM && 595 PCI_MAPREG_MEM_TYPE(rval) == PCI_MAPREG_MEM_TYPE_64BIT) { 596 pci_conf_write(pc, tag, reg + 4, 0xffffffff); 597 mask64h = pci_conf_read(pc, tag, reg + 4); 598 pci_conf_write(pc, tag, reg + 4, rval64h); 599 } else 600 mask64h = 0; 601 splx(s); 602 } else 603 mask = mask64h = 0; 604 #endif /* _KERNEL */ 605 606 printf(" Base address register at 0x%02x", reg); 607 if (name) 608 printf(" (%s)", name); 609 printf("\n "); 610 if (rval == 0) { 611 printf("not implemented(?)\n"); 612 return width; 613 } 614 printf("type: "); 615 if (PCI_MAPREG_TYPE(rval) == PCI_MAPREG_TYPE_MEM) { 616 const char *type, *prefetch; 617 618 switch (PCI_MAPREG_MEM_TYPE(rval)) { 619 case PCI_MAPREG_MEM_TYPE_32BIT: 620 type = "32-bit"; 621 break; 622 case PCI_MAPREG_MEM_TYPE_32BIT_1M: 623 type = "32-bit-1M"; 624 break; 625 case PCI_MAPREG_MEM_TYPE_64BIT: 626 type = "64-bit"; 627 break; 628 default: 629 type = "unknown (XXX)"; 630 break; 631 } 632 if (PCI_MAPREG_MEM_PREFETCHABLE(rval)) 633 prefetch = ""; 634 else 635 prefetch = "non"; 636 printf("%s %sprefetchable memory\n", type, prefetch); 637 switch (PCI_MAPREG_MEM_TYPE(rval)) { 638 case PCI_MAPREG_MEM_TYPE_64BIT: 639 printf(" base: 0x%016llx, ", 640 PCI_MAPREG_MEM64_ADDR( 641 ((((long long) rval64h) << 32) | rval))); 642 #ifdef _KERNEL 643 if (sizebar) 644 printf("size: 0x%016llx", 645 PCI_MAPREG_MEM64_SIZE( 646 ((((long long) mask64h) << 32) | mask))); 647 else 648 #endif /* _KERNEL */ 649 printf("not sized"); 650 printf("\n"); 651 break; 652 case PCI_MAPREG_MEM_TYPE_32BIT: 653 case PCI_MAPREG_MEM_TYPE_32BIT_1M: 654 default: 655 printf(" base: 0x%08x, ", 656 PCI_MAPREG_MEM_ADDR(rval)); 657 #ifdef _KERNEL 658 if (sizebar) 659 printf("size: 0x%08x", 660 PCI_MAPREG_MEM_SIZE(mask)); 661 else 662 #endif /* _KERNEL */ 663 printf("not sized"); 664 printf("\n"); 665 break; 666 } 667 } else { 668 #ifdef _KERNEL 669 if (sizebar) 670 printf("%d-bit ", mask & ~0x0000ffff ? 32 : 16); 671 #endif /* _KERNEL */ 672 printf("i/o\n"); 673 printf(" base: 0x%08x, ", PCI_MAPREG_IO_ADDR(rval)); 674 #ifdef _KERNEL 675 if (sizebar) 676 printf("size: 0x%08x", PCI_MAPREG_IO_SIZE(mask)); 677 else 678 #endif /* _KERNEL */ 679 printf("not sized"); 680 printf("\n"); 681 } 682 683 return width; 684 } 685 686 static void 687 pci_conf_print_regs(const pcireg_t *regs, int first, int pastlast) 688 { 689 int off, needaddr, neednl; 690 691 needaddr = 1; 692 neednl = 0; 693 for (off = first; off < pastlast; off += 4) { 694 if ((off % 16) == 0 || needaddr) { 695 printf(" 0x%02x:", off); 696 needaddr = 0; 697 } 698 printf(" 0x%08x", regs[o2i(off)]); 699 neednl = 1; 700 if ((off % 16) == 12) { 701 printf("\n"); 702 neednl = 0; 703 } 704 } 705 if (neednl) 706 printf("\n"); 707 } 708 709 static void 710 pci_conf_print_type0( 711 #ifdef _KERNEL 712 pci_chipset_tag_t pc, pcitag_t tag, 713 #endif 714 const pcireg_t *regs 715 #ifdef _KERNEL 716 , int sizebars 717 #endif 718 ) 719 { 720 int off, width; 721 pcireg_t rval; 722 723 for (off = PCI_MAPREG_START; off < PCI_MAPREG_END; off += width) { 724 #ifdef _KERNEL 725 width = pci_conf_print_bar(pc, tag, regs, off, NULL, sizebars); 726 #else 727 width = pci_conf_print_bar(regs, off, NULL); 728 #endif 729 } 730 731 printf(" Cardbus CIS Pointer: 0x%08x\n", regs[o2i(0x28)]); 732 733 rval = regs[o2i(PCI_SUBSYS_ID_REG)]; 734 printf(" Subsystem vendor ID: 0x%04x\n", PCI_VENDOR(rval)); 735 printf(" Subsystem ID: 0x%04x\n", PCI_PRODUCT(rval)); 736 737 /* XXX */ 738 printf(" Expansion ROM Base Address: 0x%08x\n", regs[o2i(0x30)]); 739 740 if (regs[o2i(PCI_COMMAND_STATUS_REG)] & PCI_STATUS_CAPLIST_SUPPORT) 741 printf(" Capability list pointer: 0x%02x\n", 742 PCI_CAPLIST_PTR(regs[o2i(PCI_CAPLISTPTR_REG)])); 743 else 744 printf(" Reserved @ 0x34: 0x%08x\n", regs[o2i(0x34)]); 745 746 printf(" Reserved @ 0x38: 0x%08x\n", regs[o2i(0x38)]); 747 748 rval = regs[o2i(PCI_INTERRUPT_REG)]; 749 printf(" Maximum Latency: 0x%02x\n", (rval >> 24) & 0xff); 750 printf(" Minimum Grant: 0x%02x\n", (rval >> 16) & 0xff); 751 printf(" Interrupt pin: 0x%02x ", PCI_INTERRUPT_PIN(rval)); 752 switch (PCI_INTERRUPT_PIN(rval)) { 753 case PCI_INTERRUPT_PIN_NONE: 754 printf("(none)"); 755 break; 756 case PCI_INTERRUPT_PIN_A: 757 printf("(pin A)"); 758 break; 759 case PCI_INTERRUPT_PIN_B: 760 printf("(pin B)"); 761 break; 762 case PCI_INTERRUPT_PIN_C: 763 printf("(pin C)"); 764 break; 765 case PCI_INTERRUPT_PIN_D: 766 printf("(pin D)"); 767 break; 768 default: 769 printf("(? ? ?)"); 770 break; 771 } 772 printf("\n"); 773 printf(" Interrupt line: 0x%02x\n", PCI_INTERRUPT_LINE(rval)); 774 } 775 776 static void 777 pci_conf_print_caplist( 778 #ifdef _KERNEL 779 pci_chipset_tag_t pc, pcitag_t tag, 780 #endif 781 const pcireg_t *regs, int capoff) 782 { 783 int off; 784 pcireg_t rval; 785 786 for (off = PCI_CAPLIST_PTR(regs[o2i(capoff)]); 787 off != 0; 788 off = PCI_CAPLIST_NEXT(regs[o2i(off)])) { 789 rval = regs[o2i(off)]; 790 printf(" Capability register at 0x%02x\n", off); 791 792 printf(" type: 0x%02x (", PCI_CAPLIST_CAP(rval)); 793 switch (PCI_CAPLIST_CAP(rval)) { 794 case PCI_CAP_RESERVED0: 795 printf("reserved"); 796 break; 797 case PCI_CAP_PWRMGMT: 798 printf("Power Management, rev. %d.0", 799 (rval >> 0) & 0x07); /* XXX not clear */ 800 break; 801 case PCI_CAP_AGP: 802 printf("AGP, rev. %d.%d", 803 PCI_CAP_AGP_MAJOR(rval), 804 PCI_CAP_AGP_MINOR(rval)); 805 break; 806 case PCI_CAP_VPD: 807 printf("VPD"); 808 break; 809 case PCI_CAP_SLOTID: 810 printf("SlotID"); 811 break; 812 case PCI_CAP_MSI: 813 printf("MSI"); 814 break; 815 case PCI_CAP_CPCI_HOTSWAP: 816 printf("CompactPCI Hot-swapping"); 817 break; 818 case PCI_CAP_PCIX: 819 printf("PCI-X"); 820 break; 821 case PCI_CAP_LDT: 822 printf("LDT"); 823 break; 824 case PCI_CAP_VENDSPEC: 825 printf("Vendor-specific"); 826 break; 827 case PCI_CAP_DEBUGPORT: 828 printf("Debug Port"); 829 break; 830 case PCI_CAP_CPCI_RSRCCTL: 831 printf("CompactPCI Resource Control"); 832 break; 833 case PCI_CAP_HOTPLUG: 834 printf("Hot-Plug"); 835 break; 836 case PCI_CAP_AGP8: 837 printf("AGP 8x"); 838 break; 839 case PCI_CAP_SECURE: 840 printf("Secure Device"); 841 break; 842 case PCI_CAP_PCIEXPRESS: 843 printf("PCI Express"); 844 break; 845 case PCI_CAP_MSIX: 846 printf("MSI-X"); 847 break; 848 default: 849 printf("unknown"); 850 } 851 printf(")\n"); 852 } 853 } 854 855 static void 856 pci_conf_print_type1( 857 #ifdef _KERNEL 858 pci_chipset_tag_t pc, pcitag_t tag, 859 #endif 860 const pcireg_t *regs 861 #ifdef _KERNEL 862 , int sizebars 863 #endif 864 ) 865 { 866 int off, width; 867 pcireg_t rval; 868 869 /* 870 * XXX these need to be printed in more detail, need to be 871 * XXX checked against specs/docs, etc. 872 * 873 * This layout was cribbed from the TI PCI2030 PCI-to-PCI 874 * Bridge chip documentation, and may not be correct with 875 * respect to various standards. (XXX) 876 */ 877 878 for (off = 0x10; off < 0x18; off += width) { 879 #ifdef _KERNEL 880 width = pci_conf_print_bar(pc, tag, regs, off, NULL, sizebars); 881 #else 882 width = pci_conf_print_bar(regs, off, NULL); 883 #endif 884 } 885 886 printf(" Primary bus number: 0x%02x\n", 887 (regs[o2i(0x18)] >> 0) & 0xff); 888 printf(" Secondary bus number: 0x%02x\n", 889 (regs[o2i(0x18)] >> 8) & 0xff); 890 printf(" Subordinate bus number: 0x%02x\n", 891 (regs[o2i(0x18)] >> 16) & 0xff); 892 printf(" Secondary bus latency timer: 0x%02x\n", 893 (regs[o2i(0x18)] >> 24) & 0xff); 894 895 rval = (regs[o2i(0x1c)] >> 16) & 0xffff; 896 printf(" Secondary status register: 0x%04x\n", rval); /* XXX bits */ 897 onoff("66 MHz capable", 0x0020); 898 onoff("User Definable Features (UDF) support", 0x0040); 899 onoff("Fast back-to-back capable", 0x0080); 900 onoff("Data parity error detected", 0x0100); 901 902 printf(" DEVSEL timing: "); 903 switch (rval & 0x0600) { 904 case 0x0000: 905 printf("fast"); 906 break; 907 case 0x0200: 908 printf("medium"); 909 break; 910 case 0x0400: 911 printf("slow"); 912 break; 913 default: 914 printf("unknown/reserved"); /* XXX */ 915 break; 916 } 917 printf(" (0x%x)\n", (rval & 0x0600) >> 9); 918 919 onoff("Signaled Target Abort", 0x0800); 920 onoff("Received Target Abort", 0x1000); 921 onoff("Received Master Abort", 0x2000); 922 onoff("System Error", 0x4000); 923 onoff("Parity Error", 0x8000); 924 925 /* XXX Print more prettily */ 926 printf(" I/O region:\n"); 927 printf(" base register: 0x%02x\n", (regs[o2i(0x1c)] >> 0) & 0xff); 928 printf(" limit register: 0x%02x\n", (regs[o2i(0x1c)] >> 8) & 0xff); 929 printf(" base upper 16 bits register: 0x%04x\n", 930 (regs[o2i(0x30)] >> 0) & 0xffff); 931 printf(" limit upper 16 bits register: 0x%04x\n", 932 (regs[o2i(0x30)] >> 16) & 0xffff); 933 934 /* XXX Print more prettily */ 935 printf(" Memory region:\n"); 936 printf(" base register: 0x%04x\n", 937 (regs[o2i(0x20)] >> 0) & 0xffff); 938 printf(" limit register: 0x%04x\n", 939 (regs[o2i(0x20)] >> 16) & 0xffff); 940 941 /* XXX Print more prettily */ 942 printf(" Prefetchable memory region:\n"); 943 printf(" base register: 0x%04x\n", 944 (regs[o2i(0x24)] >> 0) & 0xffff); 945 printf(" limit register: 0x%04x\n", 946 (regs[o2i(0x24)] >> 16) & 0xffff); 947 printf(" base upper 32 bits register: 0x%08x\n", regs[o2i(0x28)]); 948 printf(" limit upper 32 bits register: 0x%08x\n", regs[o2i(0x2c)]); 949 950 if (regs[o2i(PCI_COMMAND_STATUS_REG)] & PCI_STATUS_CAPLIST_SUPPORT) 951 printf(" Capability list pointer: 0x%02x\n", 952 PCI_CAPLIST_PTR(regs[o2i(PCI_CAPLISTPTR_REG)])); 953 else 954 printf(" Reserved @ 0x34: 0x%08x\n", regs[o2i(0x34)]); 955 956 /* XXX */ 957 printf(" Expansion ROM Base Address: 0x%08x\n", regs[o2i(0x38)]); 958 959 printf(" Interrupt line: 0x%02x\n", 960 (regs[o2i(0x3c)] >> 0) & 0xff); 961 printf(" Interrupt pin: 0x%02x ", 962 (regs[o2i(0x3c)] >> 8) & 0xff); 963 switch ((regs[o2i(0x3c)] >> 8) & 0xff) { 964 case PCI_INTERRUPT_PIN_NONE: 965 printf("(none)"); 966 break; 967 case PCI_INTERRUPT_PIN_A: 968 printf("(pin A)"); 969 break; 970 case PCI_INTERRUPT_PIN_B: 971 printf("(pin B)"); 972 break; 973 case PCI_INTERRUPT_PIN_C: 974 printf("(pin C)"); 975 break; 976 case PCI_INTERRUPT_PIN_D: 977 printf("(pin D)"); 978 break; 979 default: 980 printf("(? ? ?)"); 981 break; 982 } 983 printf("\n"); 984 rval = (regs[o2i(0x3c)] >> 16) & 0xffff; 985 printf(" Bridge control register: 0x%04x\n", rval); /* XXX bits */ 986 onoff("Parity error response", 0x0001); 987 onoff("Secondary SERR forwarding", 0x0002); 988 onoff("ISA enable", 0x0004); 989 onoff("VGA enable", 0x0008); 990 onoff("Master abort reporting", 0x0020); 991 onoff("Secondary bus reset", 0x0040); 992 onoff("Fast back-to-back capable", 0x0080); 993 } 994 995 static void 996 pci_conf_print_type2( 997 #ifdef _KERNEL 998 pci_chipset_tag_t pc, pcitag_t tag, 999 #endif 1000 const pcireg_t *regs 1001 #ifdef _KERNEL 1002 , int sizebars 1003 #endif 1004 ) 1005 { 1006 pcireg_t rval; 1007 1008 /* 1009 * XXX these need to be printed in more detail, need to be 1010 * XXX checked against specs/docs, etc. 1011 * 1012 * This layout was cribbed from the TI PCI1130 PCI-to-CardBus 1013 * controller chip documentation, and may not be correct with 1014 * respect to various standards. (XXX) 1015 */ 1016 1017 #ifdef _KERNEL 1018 pci_conf_print_bar(pc, tag, regs, 0x10, 1019 "CardBus socket/ExCA registers", sizebars); 1020 #else 1021 pci_conf_print_bar(regs, 0x10, "CardBus socket/ExCA registers"); 1022 #endif 1023 1024 if (regs[o2i(PCI_COMMAND_STATUS_REG)] & PCI_STATUS_CAPLIST_SUPPORT) 1025 printf(" Capability list pointer: 0x%02x\n", 1026 PCI_CAPLIST_PTR(regs[o2i(PCI_CARDBUS_CAPLISTPTR_REG)])); 1027 else 1028 printf(" Reserved @ 0x14: 0x%04x\n", 1029 (regs[o2i(0x14)] >> 0) & 0xffff); 1030 rval = (regs[o2i(0x14)] >> 16) & 0xffff; 1031 printf(" Secondary status register: 0x%04x\n", rval); 1032 onoff("66 MHz capable", 0x0020); 1033 onoff("User Definable Features (UDF) support", 0x0040); 1034 onoff("Fast back-to-back capable", 0x0080); 1035 onoff("Data parity error detection", 0x0100); 1036 1037 printf(" DEVSEL timing: "); 1038 switch (rval & 0x0600) { 1039 case 0x0000: 1040 printf("fast"); 1041 break; 1042 case 0x0200: 1043 printf("medium"); 1044 break; 1045 case 0x0400: 1046 printf("slow"); 1047 break; 1048 default: 1049 printf("unknown/reserved"); /* XXX */ 1050 break; 1051 } 1052 printf(" (0x%x)\n", (rval & 0x0600) >> 9); 1053 onoff("PCI target aborts terminate CardBus bus master transactions", 1054 0x0800); 1055 onoff("CardBus target aborts terminate PCI bus master transactions", 1056 0x1000); 1057 onoff("Bus initiator aborts terminate initiator transactions", 1058 0x2000); 1059 onoff("System error", 0x4000); 1060 onoff("Parity error", 0x8000); 1061 1062 printf(" PCI bus number: 0x%02x\n", 1063 (regs[o2i(0x18)] >> 0) & 0xff); 1064 printf(" CardBus bus number: 0x%02x\n", 1065 (regs[o2i(0x18)] >> 8) & 0xff); 1066 printf(" Subordinate bus number: 0x%02x\n", 1067 (regs[o2i(0x18)] >> 16) & 0xff); 1068 printf(" CardBus latency timer: 0x%02x\n", 1069 (regs[o2i(0x18)] >> 24) & 0xff); 1070 1071 /* XXX Print more prettily */ 1072 printf(" CardBus memory region 0:\n"); 1073 printf(" base register: 0x%08x\n", regs[o2i(0x1c)]); 1074 printf(" limit register: 0x%08x\n", regs[o2i(0x20)]); 1075 printf(" CardBus memory region 1:\n"); 1076 printf(" base register: 0x%08x\n", regs[o2i(0x24)]); 1077 printf(" limit register: 0x%08x\n", regs[o2i(0x28)]); 1078 printf(" CardBus I/O region 0:\n"); 1079 printf(" base register: 0x%08x\n", regs[o2i(0x2c)]); 1080 printf(" limit register: 0x%08x\n", regs[o2i(0x30)]); 1081 printf(" CardBus I/O region 1:\n"); 1082 printf(" base register: 0x%08x\n", regs[o2i(0x34)]); 1083 printf(" limit register: 0x%08x\n", regs[o2i(0x38)]); 1084 1085 printf(" Interrupt line: 0x%02x\n", 1086 (regs[o2i(0x3c)] >> 0) & 0xff); 1087 printf(" Interrupt pin: 0x%02x ", 1088 (regs[o2i(0x3c)] >> 8) & 0xff); 1089 switch ((regs[o2i(0x3c)] >> 8) & 0xff) { 1090 case PCI_INTERRUPT_PIN_NONE: 1091 printf("(none)"); 1092 break; 1093 case PCI_INTERRUPT_PIN_A: 1094 printf("(pin A)"); 1095 break; 1096 case PCI_INTERRUPT_PIN_B: 1097 printf("(pin B)"); 1098 break; 1099 case PCI_INTERRUPT_PIN_C: 1100 printf("(pin C)"); 1101 break; 1102 case PCI_INTERRUPT_PIN_D: 1103 printf("(pin D)"); 1104 break; 1105 default: 1106 printf("(? ? ?)"); 1107 break; 1108 } 1109 printf("\n"); 1110 rval = (regs[o2i(0x3c)] >> 16) & 0xffff; 1111 printf(" Bridge control register: 0x%04x\n", rval); 1112 onoff("Parity error response", 0x0001); 1113 onoff("CardBus SERR forwarding", 0x0002); 1114 onoff("ISA enable", 0x0004); 1115 onoff("VGA enable", 0x0008); 1116 onoff("CardBus master abort reporting", 0x0020); 1117 onoff("CardBus reset", 0x0040); 1118 onoff("Functional interrupts routed by ExCA registers", 0x0080); 1119 onoff("Memory window 0 prefetchable", 0x0100); 1120 onoff("Memory window 1 prefetchable", 0x0200); 1121 onoff("Write posting enable", 0x0400); 1122 1123 rval = regs[o2i(0x40)]; 1124 printf(" Subsystem vendor ID: 0x%04x\n", PCI_VENDOR(rval)); 1125 printf(" Subsystem ID: 0x%04x\n", PCI_PRODUCT(rval)); 1126 1127 #ifdef _KERNEL 1128 pci_conf_print_bar(pc, tag, regs, 0x44, "legacy-mode registers", 1129 sizebars); 1130 #else 1131 pci_conf_print_bar(regs, 0x44, "legacy-mode registers"); 1132 #endif 1133 } 1134 1135 void 1136 pci_conf_print( 1137 #ifdef _KERNEL 1138 pci_chipset_tag_t pc, pcitag_t tag, 1139 void (*printfn)(pci_chipset_tag_t, pcitag_t, const pcireg_t *) 1140 #else 1141 int pcifd, u_int bus, u_int dev, u_int func 1142 #endif 1143 ) 1144 { 1145 pcireg_t regs[o2i(256)]; 1146 int off, capoff, endoff, hdrtype; 1147 const char *typename; 1148 #ifdef _KERNEL 1149 void (*typeprintfn)(pci_chipset_tag_t, pcitag_t, const pcireg_t *, int); 1150 int sizebars; 1151 #else 1152 void (*typeprintfn)(const pcireg_t *); 1153 #endif 1154 1155 printf("PCI configuration registers:\n"); 1156 1157 for (off = 0; off < 256; off += 4) { 1158 #ifdef _KERNEL 1159 regs[o2i(off)] = pci_conf_read(pc, tag, off); 1160 #else 1161 if (pcibus_conf_read(pcifd, bus, dev, func, off, 1162 ®s[o2i(off)]) == -1) 1163 regs[o2i(off)] = 0; 1164 #endif 1165 } 1166 1167 #ifdef _KERNEL 1168 sizebars = 1; 1169 if (PCI_CLASS(regs[o2i(PCI_CLASS_REG)]) == PCI_CLASS_BRIDGE && 1170 PCI_SUBCLASS(regs[o2i(PCI_CLASS_REG)]) == PCI_SUBCLASS_BRIDGE_HOST) 1171 sizebars = 0; 1172 #endif 1173 1174 /* common header */ 1175 printf(" Common header:\n"); 1176 pci_conf_print_regs(regs, 0, 16); 1177 1178 printf("\n"); 1179 #ifdef _KERNEL 1180 pci_conf_print_common(pc, tag, regs); 1181 #else 1182 pci_conf_print_common(regs); 1183 #endif 1184 printf("\n"); 1185 1186 /* type-dependent header */ 1187 hdrtype = PCI_HDRTYPE_TYPE(regs[o2i(PCI_BHLC_REG)]); 1188 switch (hdrtype) { /* XXX make a table, eventually */ 1189 case 0: 1190 /* Standard device header */ 1191 typename = "\"normal\" device"; 1192 typeprintfn = &pci_conf_print_type0; 1193 capoff = PCI_CAPLISTPTR_REG; 1194 endoff = 64; 1195 break; 1196 case 1: 1197 /* PCI-PCI bridge header */ 1198 typename = "PCI-PCI bridge"; 1199 typeprintfn = &pci_conf_print_type1; 1200 capoff = PCI_CAPLISTPTR_REG; 1201 endoff = 64; 1202 break; 1203 case 2: 1204 /* PCI-CardBus bridge header */ 1205 typename = "PCI-CardBus bridge"; 1206 typeprintfn = &pci_conf_print_type2; 1207 capoff = PCI_CARDBUS_CAPLISTPTR_REG; 1208 endoff = 72; 1209 break; 1210 default: 1211 typename = NULL; 1212 typeprintfn = 0; 1213 capoff = -1; 1214 endoff = 64; 1215 break; 1216 } 1217 printf(" Type %d ", hdrtype); 1218 if (typename != NULL) 1219 printf("(%s) ", typename); 1220 printf("header:\n"); 1221 pci_conf_print_regs(regs, 16, endoff); 1222 printf("\n"); 1223 if (typeprintfn) { 1224 #ifdef _KERNEL 1225 (*typeprintfn)(pc, tag, regs, sizebars); 1226 #else 1227 (*typeprintfn)(regs); 1228 #endif 1229 } else 1230 printf(" Don't know how to pretty-print type %d header.\n", 1231 hdrtype); 1232 printf("\n"); 1233 1234 /* capability list, if present */ 1235 if ((regs[o2i(PCI_COMMAND_STATUS_REG)] & PCI_STATUS_CAPLIST_SUPPORT) 1236 && (capoff > 0)) { 1237 #ifdef _KERNEL 1238 pci_conf_print_caplist(pc, tag, regs, capoff); 1239 #else 1240 pci_conf_print_caplist(regs, capoff); 1241 #endif 1242 printf("\n"); 1243 } 1244 1245 /* device-dependent header */ 1246 printf(" Device-dependent header:\n"); 1247 pci_conf_print_regs(regs, endoff, 256); 1248 printf("\n"); 1249 #ifdef _KERNEL 1250 if (printfn) 1251 (*printfn)(pc, tag, regs); 1252 else 1253 printf(" Don't know how to pretty-print device-dependent header.\n"); 1254 printf("\n"); 1255 #endif /* _KERNEL */ 1256 } 1257
Indexes created Wed Sep 24 14:09:57 GMT 2025